Enable this on i386 to restrict the set of input registers
for an 8-bit store, as required by the architecture. This
removes the last use of scratch registers for user-only mode.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always true when movbe is available, otherwise leave
this to generic code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Out-of-range shifts have undefined results, but must not trap.
Mask off immediate shift counts to solve this problem.
This bug can be reproduced by running the following guest instructions:
xor %ecx,%ecx
sar %cl,%eax
cmovne %edi,%eax
After optimization, the tcg opcodes of the sar are
movi_i32 tmp3,$0xffffffffffffffff pref=all
sar_i32 tmp3,eax,tmp3 dead: 2 pref=all
mov_i32 cc_dst,eax sync: 0 dead: 1 pref=0xffc0300
mov_i32 cc_src,tmp3 sync: 0 dead: 0 1 pref=all
movi_i32 cc_op,$0x31 sync: 0 dead: 0 pref=all
The sar_i32 opcode is a shift by -1, which unmasked generates
0x200808d618: fffa5b9b illegal
Signed-off-by: Zihao Yu <yuzihao@ict.ac.cn>
Message-Id: <20201216081206.9628-1-yuzihao@ict.ac.cn>
[rth: Reworded the patch description.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In f47db80cc0, we handled odd-sized tail clearing for
the case of hosts that have vector operations, but did
not handle the case of hosts that do not have vector ops.
This was ok until e2e7168a21, which changed the encoding
of simd_desc such that the odd sizes are impossible.
Add memset as a tcg helper, and use that for all out-of-line
byte stores to vectors. This includes, but is not limited to,
the tail clearing operation in question.
Cc: qemu-stable@nongnu.org
Buglink: https://bugs.launchpad.net/bugs/1907817
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This has been a tcg-specific function, but is also in use
by hardware accelerators via physmem.c. This can cause
link errors when tcg is disabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201214140314.18544-3-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LLVM/Clang, supports runtime checks for forward-edge Control-Flow
Integrity (CFI).
CFI on indirect function calls (cfi-icall) ensures that, in indirect
function calls, the function called is of the right signature for the
pointer type defined at compile time.
For this check to work, the code must always respect the function
signature when using function pointer, the function must be defined
at compile time, and be compiled with link-time optimization.
This rules out, for example, shared libraries that are dynamically loaded
(given that functions are not known at compile time), and code that is
dynamically generated at run-time.
This patch:
1) Introduces the CONFIG_CFI flag to support cfi in QEMU
2) Introduces a decorator to allow the definition of "sensitive"
functions, where a non-instrumented function may be called at runtime
through a pointer. The decorator will take care of disabling cfi-icall
checks on such functions, when cfi is enabled.
3) Marks functions currently in QEMU that exhibit such behavior,
in particular:
- The function in TCG that calls pre-compiled TBs
- The function in TCI that interprets instructions
- Functions in the plugin infrastructures that jump to callbacks
- Functions in util that directly call a signal handler
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org
Message-Id: <20201204230615.2392-3-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To be able to compile this file with -Werror=implicit-fallthrough,
we need to add some fallthrough annotations to the case statements
that might fall through. Unfortunately, the typical "/* fallthrough */"
comments do not work here as expected since some case labels are
wrapped in macros and the compiler fails to match the comments in
this case. But using __attribute__((fallthrough)) seems to work fine,
so let's use that instead (by introducing a new QEMU_FALLTHROUGH
macro in our compiler.h header file).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201211152426.350966-11-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit cd0372c515.
The patch is incorrect in that it retains copies between globals and
non-local temps, and non-local temps still die at the end of the BB.
Failing test case for hppa:
.globl _start
_start:
cmpiclr,= 0x24,%r19,%r0
cmpiclr,<> 0x2f,%r19,%r19
---- 00010057 0001005b
movi_i32 tmp0,$0x24
sub_i32 tmp1,tmp0,r19
mov_i32 tmp2,tmp0
mov_i32 tmp3,r19
movi_i32 tmp1,$0x0
---- 0001005b 0001005f
brcond_i32 tmp2,tmp3,eq,$L1
movi_i32 tmp0,$0x2f
sub_i32 tmp1,tmp0,r19
mov_i32 tmp2,tmp0
mov_i32 tmp3,r19
movi_i32 tmp1,$0x0
mov_i32 r19,tmp1
setcond_i32 psw_n,tmp2,tmp3,ne
set_label $L1
In this case, both copies of "mov_i32 tmp3,r19" are removed. The
second because opt thought it was redundant. The first is removed
later by liveness because tmp3 is known to be dead. This leaves
the setcond_i32 with an uninitialized input.
Revert the entire patch for 5.2, and a proper optimization across
the branch may be considered for the next development cycle.
Reported-by: qemu@igor2.repo.hu
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 6e6c4efed9, there has been a more appropriate range check
done later at the end of tcg_gen_code. There, a failing range
check results in a returned error code, which causes the TB to
be restarted at half the size.
Reported-by: Sai Pavan Boddu <saipava@xilinx.com>
Tested-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can easily propagate temp values through the entire extended
basic block (in this case, the set of blocks connected by fallthru),
simply by not discarding the register state at the branch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can easily register allocate the entire extended basic block
(in this case, the set of blocks connected by fallthru), simply
by not discarding the register state at the branch.
This does not help blocks starting with a label, as they are
reached via a taken branch, and that would require saving the
complete register state at the branch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cmp_vec opcode is mandatory; this symbol is unused.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the two arguments are identical, this can be reduced to
dup_vec or to mov_vec from a tcg_constant_vec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The definition of INDEX_op_dupi_vec is that it operates on
units of tcg_target_ulong -- in this case 32 bits. It does
not work to use this for a uint64_t value that happens to be
small enough to fit in tcg_target_ulong.
Fixes: d2fd745fe8
Fixes: db432672dc
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The previous change wrongly stated that 32-bit avx2 should have
used VPBROADCASTW. But that's a 16-bit broadcast and we want a
32-bit broadcast.
Fixes: 7b60ef3264
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are easier to set and test when they have their own fields.
Reduce the size of alias_index and sort_index to 4 bits, which is
sufficient for TCG_MAX_OP_ARGS. This leaves only the bits indicating
constants within the ct field.
Move all initialization to allocation time, rather than init
individual fields in process_op_defs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This wasn't actually used for anything, really. All variable
operands must accept registers, and which are indicated by the
set in TCGArgConstraint.regs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This uses an existing hole in the TCGArgConstraint structure
and will be convenient for keeping the data in one place.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The union is unused; let "regs" appear in the main structure
without the "u.regs" wrapping.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With larger vector sizes, it turns out oprsz == maxsz, and we only
need to represent mismatch for oprsz <= 32. We do, however, need
to represent larger oprsz and do so without reducing SIMD_DATA_BITS.
Reduce the size of the oprsz field and increase the maxsz field.
Steal the oprsz value of 24 to indicate equality with maxsz.
Tested-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of creating GStrings and passing them into log_disas,
just print the annotations directly in tb_gen_code.
Fix the annotations for the slow paths of the TB, after the
part implementing the final guest instruction.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
We already support duplication of 128-bit blocks. This extends
that support to 256-bit blocks. This will be needed by SVE2.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not store back to the exact memory from which we just loaded.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback inline expansion for vectorized absolute value,
when the host doesn't support such an insn was flawed.
E.g. when a vector of bytes has all elements negative, mask
will be 0xffff_ffff_ffff_ffff. Subtracting mask only adds 1
to the low element instead of all elements becase -mask is 1
and not 0x0101_0101_0101_0101.
Signed-off-by: Stephen Long <steplong@quicinc.com>
Message-Id: <20200813161818.190-1-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Here's my first pull request for qemu-5.2, which has quite a few
accumulated things. Highlights are:
* Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
* Add documentation on the (very confusing) pseries NUMA configuration
* Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
* Fix icount for a number of POWER registers
* Many cleanups to error handling in XIVE code
* Validate size of -prom-env data
-----BEGIN PGP SIGNATURE-----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=L9Wi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200818' into staging
ppc patch queue 2020-08-18
Here's my first pull request for qemu-5.2, which has quite a few
accumulated things. Highlights are:
* Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
* Add documentation on the (very confusing) pseries NUMA configuration
* Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
* Fix icount for a number of POWER registers
* Many cleanups to error handling in XIVE code
* Validate size of -prom-env data
# gpg: Signature made Tue 18 Aug 2020 05:18:36 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.2-20200818: (40 commits)
spapr/xive: Use xive_source_esb_len()
nvram: Exit QEMU if NVRAM cannot contain all -prom-env data
spapr/xive: Simplify error handling of kvmppc_xive_cpu_synchronize_state()
ppc/xive: Simplify error handling in xive_tctx_realize()
spapr/xive: Simplify error handling in kvmppc_xive_connect()
ppc/xive: Fix error handling in vmstate_xive_tctx_*() callbacks
spapr/xive: Fix error handling in kvmppc_xive_post_load()
spapr/kvm: Fix error handling in kvmppc_xive_pre_save()
spapr/xive: Rework error handling of kvmppc_xive_set_source_config()
spapr/xive: Rework error handling in kvmppc_xive_get_queues()
spapr/xive: Rework error handling of kvmppc_xive_[gs]et_queue_config()
spapr/xive: Rework error handling of kvmppc_xive_cpu_[gs]et_state()
spapr/xive: Rework error handling of kvmppc_xive_mmap()
spapr/xive: Rework error handling of kvmppc_xive_source_reset()
spapr/xive: Rework error handling of kvmppc_xive_cpu_connect()
spapr: Simplify error handling in spapr_phb_realize()
spapr/xive: Convert KVM device fd checks to assert()
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers
ppc/xive: Rework setup of XiveSource::esb_mmio
target/ppc: Integrate icount to purr, vtb, and tbu40
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Group vmuluwm and vmulld. Make vmulld-specific
changes since it belongs to new ISA 3.1.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200724045845.89976-3-ljp@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Forgetting this asserts when tcg_gen_cmp_vec is called from
within tcg_gen_cmpsel_vec.
Fixes: 72b4c792c7
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1594600421-22942-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The smin/smax/umin/umax operations require the operands to be
properly sign extended. Do not drop the MO_SIGN bit from the
load, and additionally extend the val input.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reported-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701165646.1901320-1-richard.henderson@linaro.org>
Sanitize shift constants so that shift operations with
large constants don't generate invalid instructions.
Signed-off-by: Catherine A. Frederick <chocola@animebitch.es>
Message-Id: <20200607211100.22858-1-agrecascino123@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the output of the move is dead, then the last use is in
the store. If we propagate the input to the store, then we
can remove the move opcode entirely.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already had support for rotlv, using a target-specific opcode;
convert to use the generic opcode. Handle rotrv via simple negation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For immediate rotate , we can implement this in two instructions,
using SLI. For variable rotate, the oddness of aarch64 right-shift-
as-negative-left-shift means a backend-specific expansion works best.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For immediates, we must continue the special casing of 8-bit
elements. The other element sizes and shift types are trivially
implemented with shifts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No host backend support yet, but the interfaces for rotls
are in place. Only implement left-rotate for now, as the
only known use of vector rotate by scalar is s390x, so any
right-rotate would be unused and untestable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not reflect this expansion in tcg_can_emit_vecop_list,
so it is unused and unusable. However, we actually perform
the same expansion in do_gvec_shifts, so it is also unneeded.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No host backend support yet, but the interfaces for rotlv
and rotrv are in place.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Drop the generic expansion from rot to shift; we can do better
for each backend, and then this code becomes unused.
No host backend support yet, but the interfaces for rotli
are in place. Canonicalize immediate rotate to the left,
based on a survey of architectures, but provide both left
and right shift interfaces to the translators.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will become useful shortly for providing more information about
output assembly inline. While there fix up the indenting and code
formatting in disas().
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200513175134.19619-9-alex.bennee@linaro.org>
For the benefit of compatibility of function pointer types,
we have standardized on int32_t and int64_t as the integral
argument to tcg expanders.
We converted most of them in 474b2e8f0f, but missed the rotates.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have this same parameter for GVecGen2i, GVecGen3,
and GVecGen3i. This will make some SVE2 insns easier
to parameterize.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Better handling of non-power-of-2 tails as seen with Arm 8-byte
vector operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These interfaces are now unused.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the outgoing interface.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a version of tcg_gen_dup_* that takes both immediate and
a vector element size operand. This will replace the set of
tcg_gen_gvec_dup{8,16,32,64}i functions that encode the element
size within the function name.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
OPC_SYNC_WMB, OPC_SYNC_MB, OPC_SYNC_ACQUIRE, OPC_SYNC_RELEASE and
OPC_SYNC_RMB have wrong encode. According to the mips manual,
their encode should be 'OPC_SYNC | 0x?? << 6' rather than
'OPC_SYNC | 0x?? << 5'. Wrong encode can lead illegal instruction
errors. These instructions often appear with multi-threaded
simulation.
Fixes: 6f0b99104a ("tcg/mips: Add support for fence")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: lixinyu <precinct@mail.ustc.edu.cn>
Message-Id: <20200411124612.12560-1-precinct@mail.ustc.edu.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When %gs cannot be used, we use register offset addressing.
This path is almost never used, so it was clearly not tested.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200406174803.8192-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We were only constructing the 64-bit element, and not
replicating the 64-bit element across the rest of the vector.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A given RISU testcase for SVE can produce
tcg-op-vec.c:511: do_shifti: Assertion `i >= 0 && i < (8 << vece)' failed.
because expand_vec_sari gave a shift count of 32 to a MO_32
vector shift.
In 44f1441dbe, we changed from direct expansion of vector opcodes
to re-use of the tcg expanders. So while the comment correctly notes
that the hw will handle such a shift count, we now have to take our
own sanity checks into account. Which is easy in this particular case.
Fixes: 44f1441dbe
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is, after all, just two instructions.
Profiling on a cortex-a15, using -d nochain to increase the number
of exit_tb that are executed, shows a minor improvement of 0.5%.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We will shortly use this function from tcg_out_op as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While do_gen_mem_cb does copy (via extu_tl_i64) vaddr into a new temp
this won't help if the vaddr temp gets clobbered by the actual
load/store op. To avoid this clobbering we explicitly copy vaddr
before the op to ensure it is live my the time we do the
instrumentation.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Cc: qemu-stable@nongnu.org
Message-Id: <20200225124710.14152-18-alex.bennee@linaro.org>
Extend the vector generator infrastructure to handle
5 vector arguments.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-4-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All the *.inc.c files included by tcg/$TARGET/tcg-target.inc.c
are in tcg/, their parent directory. To simplify the preprocessor
search path, include the relative parent path: '..'.
Patch created mechanically by running:
$ for x in tcg-pool.inc.c tcg-ldst.inc.c; do \
sed -i "s,#include \"$x\",#include \"../$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-3-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We currently search both the root and the tcg/ directories for tcg
files:
$ git grep '#include "tcg/' | wc -l
28
$ git grep '#include "tcg[^/]' | wc -l
94
To simplify the preprocessor search path, unify by expliciting the
tcg/ directory.
Patch created mechanically by running:
$ for x in \
tcg.h tcg-mo.h tcg-op.h tcg-opc.h \
tcg-op-gvec.h tcg-gvec-desc.h; do \
sed -i "s,#include \"$x\",#include \"tcg/$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are no uses of the *_cmmu names other than the bare wrapping
within the *_code inlines. Therefore rename the functions so we
can drop the inlines.
Use abi_ptr instead of target_ulong in preparation for user-only;
the two types are identical for softmmu.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This now allows changing the logfile while logging is active,
and also solves the issue of a seg fault while changing the logfile.
Any read access to the qemu_logfile handle will use
the rcu_read_lock()/unlock() around the use of the handle.
To fetch the handle we will use atomic_rcu_read().
We also in many cases do a check for validity of the
logfile handle before using it to deal with the case where the
file is closed and set to NULL.
The cases where we write to the qemu_logfile will use atomic_rcu_set().
Writers will also use call_rcu() with a newly added qemu_logfile_free
function for freeing/closing when readers have finished.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-6-robert.foley@linaro.org>
qemu_log_lock() now returns a handle and qemu_log_unlock() receives a
handle to unlock. This allows for changing the handle during logging
and ensures the lock() and unlock() are for the same file.
Also in target/tilegx/translate.c removed the qemu_log_lock()/unlock()
calls (and the log("\n")), since the translator can longjmp out of the
loop if it attempts to translate an instruction in an inaccessible page.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-5-robert.foley@linaro.org>
Since 2008 the tcg/LICENSE file has not changed: it claims that
everything under tcg/ is BSD-licensed.
This is not true and hasn't been true for years: in 2013 we
accepted the tcg/aarch64 target code under a GPLv2-or-later
license statement. We also have generic vector optimisation
code under the LGPL2.1-or-later, and the TCI backend is
GPLv2-or-later. Further, many of the files are not BSD
licensed but MIT licensed.
We don't really consider the tcg subdirectory to be a distinct part
of QEMU anyway.
Remove the LICENSE file, since claiming false information
about the license of the code is confusing.
Update the main project LICENSE file also to be clearer about
the licenses used by TCG.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191025155848.17362-5-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the copyright/license boilerplate for tcg/i386/tcg-target.opc.h.
This file has had only two commits, 4b06c21682 and
d9897efa1f, both by a Linaro engineer.
The license is MIT, since that's what the rest of tcg/ppc/ is.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191025155848.17362-4-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the copyright/license boilerplate for tcg/i386/tcg-target.opc.h.
This file has had only one commit, 770c2fc7bb, by
a Linaro engineer.
The license is MIT, since that's what the rest of tcg/i386/ is.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191025155848.17362-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the copyright/license boilerplate for target/aarch64/tcg-target.opc.h.
This file has only had two commits: 14e4c1e235
and 79525dfd08, both by the same Linaro engineer.
The license is GPL-2-or-later, since that's what the
rest of tcg/aarch64 uses.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191025155848.17362-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We document this in docs/devel/load-stores.rst so lets follow it. The
32 bit and 64 bit access functions have historically not included the
sign so we leave those as is. We also introduce some signed helpers
which are used for loading immediate values in the translator.
Fixes: 282dffc8
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191021150910.23216-1-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
To capture all memory accesses we need hook into all the various
helper functions that are involved in memory operations as well as the
injected inline helper calls. A later commit will allow us to resolve
the actual guest HW addresses by replaying the lookup.
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: drop haddr handling, just deal in vaddr]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We first inject empty instrumentation from translator_loop.
After translation, we go through the plugins to see what
they want to register for, filling in the empty instrumentation.
If if turns out that some instrumentation remains unused, we
remove it.
This approach supports the following features:
- Inlining TCG code for simple operations. Note that we do not
export TCG ops to plugins. Instead, we give them a C API to
insert inlined ops. So far we only support adding an immediate
to a u64, e.g. to count events.
- "Direct" callbacks. These are callbacks that do not go via
a helper. Instead, the helper is defined at run-time, so that
the plugin code is directly called from TCG. This makes direct
callbacks as efficient as possible; they are therefore used
for very frequent events, e.g. memory callbacks.
- Passing the host address to memory callbacks. Most of this
is implemented in a later patch though.
- Instrumentation of memory accesses performed from helpers.
See the corresponding comment, as well as a later patch.
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: add alloc_tcg_plugin_context, use glib, rm hwaddr]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Will gain a user soon.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We are going to re-use mem_info later for plugins and will need to
track the mmu_idx for softmmu code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We document this in docs/devel/load-stores.rst so lets follow it. The
32 bit and 64 bit access functions have historically not included the
sign so we leave those as is. We also introduce some signed helpers
which are used for loading immediate values in the translator.
Fixes: 282dffc8
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191021150910.23216-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This fixes "make check-tcg" on a Debian x86_64 host.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190410194838.10123-1-sw@weilnetz.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are conditional on MSR.VEC for TX=1,
so we can consider these Altivec instructions.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are a mix of those like LXSD that are
only conditional only on MSR.VEC and those like LXV that are
conditional on MSR.VEC for TX=1. Thus, in the end, we can
consider all of these as Altivec instructions.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are conditional only on MSR.VEC and
are thus part of the Altivec instruction set, and not VSX.
This includes negation and compare not equal.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are conditional on MSR.FP when TX=0 and
MSR.VEC when TX=1. Since we only care about the Altivec registers,
and force TX=1, we can consider these to be Altivec instructions.
Since Altivec is true for any use of vector types, we only need
test have_isa_2_07.
This includes moves to and from the integer registers.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are conditional only on MSR.VSX and
are thus part of the VSX instruction set, and not Altivec.
This includes double-word loads and stores.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are conditional only on MSR.VEC and
are thus part of the Altivec instruction set, and not VSX.
This includes lots of double-word arithmetic and a few extra
logical operations.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The VSX instruction set instructions include double-word loads and
stores, double-word load and splat, double-word permute, and bit
select. All of which require multiple operations in the Altivec
instruction set.
Because the VSX registers map %vsr32 to %vr0, and we have no current
intention or need to use vector registers outside %vr0-%vr19, force
on the {ax,bx,cx,tx} bits within the added VSX insns so that we don't
have to otherwise modify the VR[TABC] macros.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Now that we have implemented the required tcg operations,
we can enable detection of host vector support.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> (PPC32)
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is only used for 32-bit hosts.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
For Altivec, this is always an expansion.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
For Altivec, this is done via vector shift by vector,
and loading the immediate into a register.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for vector saturated add/subtract using Altivec
instructions:
VADDSBS, VADDSHS, VADDSWS, VADDUBS, VADDUHS, VADDUWS, and
VSUBSBS, VSUBSHS, VSUBSWS, VSUBUBS, VSUBUHS, VSUBUWS.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for vector add/subtract using Altivec instructions:
VADDUBM, VADDUHM, VADDUWM, VSUBUBM, VSUBUHM, VSUBUWM.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for vector maximum/minimum using Altivec instructions
VMAXSB, VMAXSH, VMAXSW, VMAXUB, VMAXUH, VMAXUW, and
VMINSB, VMINSH, VMINSW, VMINUB, VMINUH, VMINUW.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add various bits and peaces related mostly to load and store
operations. In that context, logic, compare, and splat Altivec
instructions are used, and, therefore, the support for emitting
them is included in this patch too.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Introduce all of the flags required to enable tcg backend vector support,
and a runtime flag to indicate the host supports Altivec instructions.
For now, do not actually set have_isa_altivec to true, because we have not
yet added all of the code to actually generate all of the required insns.
However, we must define these flags in order to disable ifndefs that create
stub versions of the functions added here.
The change to tcg_out_movi works around a buglet in tcg.c wherein if we
do not define tcg_out_dupi_vec we get a declared but not defined Werror,
but if we only declare it we get a defined but not used Werror. We need
to this change to tcg_out_movi eventually anyway, so it's no biggie.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Previously we've been hard-coding knowledge that Power7 has ISEL, but
it was an optional instruction before that. Use the AT_HWCAP2 bit,
when present, to properly determine support.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is identical to have_isa_2_06, so replace it.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce an enum to hold base < 2.06 < 3.00. Use macros to
preserve the existing have_isa_2_06 and have_isa_3_00 predicates.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce macros VRT(), VRA(), VRB(), VRC() used for encoding
elements of Altivec instructions.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Introduce macro VX4() used for encoding Altivec instructions.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Altivec supports 32 128-bit vector registers, whose names are
by convention v0 through v31.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl1uiyYdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8AuwgAnYLQQbL8kjSqzp7q
gRlj0M2SX41ZW3fMkI794RwsljD9Z0QS7YGnpzHolig9XUYrGnip7STrMvlCr/1L
CIMWNHlgitgBMszLqg42/TB+6RxXn+DMX/ShUzTagC6xQhinCIpdEjoLaTKSgeP+
foIyJ2uoJLKOBP8cPTQp8evongtoQIljpsZZ0K8a4sreO1d6ytH+olkuoGiROft+
VoJkA+kNHd9cE+LPCva8UFGu1QE6uCySvhepzOpnvOtK+SXKUm2yLOFGu7RWP1pT
RkE0oRyRnImtg+cViHfUUFogIffFROdL5tuYMQVuqbINeROPUgJPav+R1Nz1P60a
xM2HEw==
=bLLU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging
Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
# gpg: Signature made Tue 03 Sep 2019 16:47:50 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190903: (36 commits)
tcg: Factor out probe_write() logic into probe_access()
tcg: Make probe_write() return a pointer to the host page
s390x/tcg: Pass a size to probe_write() in do_csst()
hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
tcg: Enforce single page access in probe_write()
tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
s390x/tcg: Fix length calculation in probe_write_access()
s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
tcg: Check for watchpoints in probe_write()
cputlb: Handle watchpoints via TLB_WATCHPOINT
cputlb: Remove double-alignment in store_helper
cputlb: Fix size operand for tlb_fill on unaligned store
exec: Factor out cpu_watchpoint_address_matches
cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
exec: Factor out core logic of check_watchpoint()
exec: Move user-only watchpoint stubs inline
target/sparc: sun4u Invert Endian TTE bit
target/sparc: Add TLB entry with attributes
cputlb: Byte swap memory transaction attribute
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Afterwise is "wise after the fact", as in "hindsight".
Here we meant "afterwards" (as in "subsequently"). Fix it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190828165307.18321-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch moves the define of target access alignment earlier from
target/foo/cpu.h to configure.
Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now
accelerator independent MemOp"
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
migration/qemu-file.h neglects to include it even though it needs
ram_addr_t. Fix that. Drop a few superfluous inclusions elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-14-armbru@redhat.com>
This patch fixes two problems:
(1) The inputs to the EXTR insn were reversed,
(2) The input constraints use rZ, which means that we need to use
the REG0 macro in order to supply XZR for a constant 0 input.
Fixes: 464c2969d5
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On a 64-bit host, discard any replications of the 32-bit
sign bit when performing the shift and merge.
Fixes: https://bugs.launchpad.net/bugs/1834496
Tested-by: Christophe Lyon <christophe.lyon@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This operation can always be emitted, even if we need to
fall back to xor. Adjust the assertions to match.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 269bd5d8 "cpu: Move the softmmu tlb to CPUNegativeOffsetState'
broke the RISC-V host build as there are two variables that are used but
not defined.
This patch renames the undefined variables mask_off and table_off to the
existing (but unused) mask_ofs and table_ofs variables.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <79729cc88ca509e08b5c4aa0aa8a52847af70c0f.1561039316.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Basically, the context could get the MachineState reference via call
chains or unrecommended qdev_get_machine() in !CONFIG_USER_ONLY mode.
A local variable of the same name would be introduced in the declaration
phase out of less effort OR replace it on the spot if it's only used
once in the context. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-4-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
There was nothing armv7 specific about the bic+cmp sequence, however
looking at the set of guests more closely shows that the 8-bit immediate
operand for the bic can only be satisfied with one guest in tree:
baseline m-profile -- 10-bit pages with aligned 4-byte memory ops.
Therefore it does not seem useful to keep this path.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This changes the code generation for the tlb from e.g.
ldr ip, [r6, #-0x10]
ldr r2, [r6, #-0xc]
and ip, ip, r4, lsr #8
ldrd r0, r1, [r2, ip]!
ldr r2, [r2, #0x18]
to
ldrd r0, r1, [r6, #-0x10]
and r0, r0, r4, lsr #8
ldrd r2, r3, [r1, r0]!
ldr r1, [r1, #0x18]
for armv7 hosts. Rearranging the register allocation in
order to avoid overlap between the two ldrd pairs causes
the patch to be larger than it ordinarily would be.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have for some time had code within the tcg backends to
handle large positive offsets from env. This move makes
sure that need not happen. Indeed, we are able to assert
at build time that simple offsets suffice for all hosts.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move all softmmu tlb data into this structure. Arrange the
members so that we are able to place mask+table together and
at a smaller absolute offset from ENV.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This instruction raises #GP, aka SIGSEGV, if the effective address
is not aligned to 16-bytes.
We have assertions in tcg-op-gvec.c that the offset from ENV is
aligned, for vector types <= V128. But the offset itself does not
validate that the final pointer is aligned -- one must also remember
to use the QEMU_ALIGNED() attribute on the vector member within ENV.
PowerPC Altivec has vector load/store instructions that silently
discard the low 4 bits of the address, making alignment mistakes
difficult to discover. Aid that by making the most popular host
visibly signal the error.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The allows immediates to be used for ORR and BIC,
as well as the trivial inversions, ORC and AND.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use MOVI+ORR or MVNI+BIC in order to build some vector constants,
as opposed to dropping them to the constant pool. This includes
all 16-bit constants and a similar set of 32-bit constants.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are several sub-classes of vector immediate, and only MOVI
can use them all. This will enable usage of MVNI and ORRI, which
use progressively fewer sub-classes.
This patch adds no new functionality, merely splits the function
and moves part of the logic into tcg_out_dupi_vec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The instruction set has 3 insns that perform the same operation,
only varying in which operand must overlap the destination. We
can represent the operation without overlap and choose based on
the operands seen.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using umin(a, b) == a as an expansion for TCG_COND_LEU is a
better alternative to (a - INT_MIN) <= (b - INT_MIN).
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already had backend support for this feature. Expand the new
cmpsel opcode using vpblendb. The combination allows us to avoid
an extra NOT for some comparison codes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If INDEX_op_foo is always expanded by tcg_expand_vec_op, then
there may be no reasonable set of constraints to return from
tcg_target_op_def for that opcode.
Let TCG_TARGET_HAS_foo be specified as -1 in that case. Thus a
boolean test for TCG_TARGET_HAS_foo is true, but we will not
assert within process_op_defs when no constraints are specified.
Compare this with tcg_can_emit_vec_op, which already uses this
tri-state indication.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform a per-element conditional move. This combination operation is
easier to implement on some host vector units than plain cmp+bitsel.
Omit the usual gvec interface, as this is intended to be used by
target-specific gvec expansion call-backs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This operation performs d = (b & a) | (c & ~a), and is present
on a majority of host vector units. Include gvec expanders.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The paths through tcg_gen_dup_mem_vec and through MO_128 were
missing the check_size_align. The path through MO_128 was also
missing the expand_clr. This last was not visible because the
only user is ARM SVE, which would set oprsz == maxsz, and not
require the clear.
Fix by adding the check_size_align and using do_dup directly
instead of duplicating the check in tcg_gen_gvec_dup_{i32,i64}.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The VBROADCASTSD instruction only allows %ymm registers as destination.
Rather than forcing VEX.L and writing to the entire 256-bit register,
revert to using MOVDDUP with an %xmm register. This is sufficient for
an avx1 host since we do not support TCG_TYPE_V256 for that case.
Also fix the 32-bit avx2, which should have used VPBROADCASTW.
Fixes: 1e262b49b5
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove a function of the same name from target/arm/.
Use a branchless implementation of abs gleaned from gcc.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow expansion either via shift by scalar or by replicating
the scalar for shift by vector.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Use a private structure for do_gvec_shifts.
The gvec expanders perform a modulo on the shift count. If the target
requires alternate behaviour, then it cannot use the generic gvec
expanders anyway, and will have to have its own custom code.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the backend to expand dup from memory directly, instead of
forcing the value into a temp first. This is especially important
if integer/vector register moves do not exist.
Note that officially tcg_out_dupm_vec is allowed to fail.
If it did, we could fix this up relatively easily:
VECE == 32/64:
Load the value into a vector register, then dup.
Both of these must work.
VECE == 8/16:
If the value happens to be at an offset such that an aligned
load would place the desired value in the least significant
end of the register, go ahead and load w/garbage in high bits.
Load the value w/INDEX_op_ld{8,16}_i32.
Attempt a move directly to vector reg, which may fail.
Store the value into the backing store for OTS.
Load the value into the vector reg w/TCG_TYPE_I32, which must work.
Duplicate from the vector reg into itself, which must work.
All of which is well and good, except that all supported
hosts can support dupm for all vece, so all of the failure
paths would be dead code and untestable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The LD1R instruction does all the work. Note that the only
useful addressing mode is a base register with no offset.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This case is similar to INDEX_op_mov_* in that we need to do
different things depending on the current location of the source.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Added some commentary to the tcg_reg_alloc_* functions.
The i386 backend already has these functions, and the aarch64 backend
could easily split out one. Nothing is done with these functions yet,
but this will aid register allocation of INDEX_op_dup_vec in a later patch.
Adjust the aarch64 tcg_out_dupi_vec signature to match the new interface.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PowerPC Altivec does not support direct moves between vector registers
and general registers. So when tcg_out_mov fails, we can use the
backing memory for the temporary to perform the move.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch merely changes the interface, aborting on all failures,
of which there are currently none.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have a function that takes an additional condition parameter
over the standard backend interface. It already takes care of
eliding no-op moves.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only fixed_reg is cpu_env, and it should not be modified
during any TB. Therefore code that tries to special-case moves
into a fixed_reg is dead. Remove it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the single opcode in .opc with a null-terminated
array in .opt_opc. We still require that all opcodes be
used with the same .vece.
Validate the contents of this list with CONFIG_DEBUG_TCG.
All tcg_gen_*_vec functions will check any list active
during .fniv expansion. Swap the active list in and out
as we expand other opcodes, or take control away from the
front-end function.
Convert all existing vector aware front ends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PowerPC Altivec does not support add and subtract of 64-bit elements.
Prepare for that configuration by not assuming the operation is
universally supported.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_can_emit_vec_op instead of just TCG_TARGET_HAS_neg_vec,
so that we check the type and vece for the actual operation.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let's add tcg_gen_gvec_3i(), similar to tcg_gen_gvec_2i(), however
without introducing "gen_helper_gvec_3i *fnoi", as it isn't needed
for now.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190416185301.25344-2-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will not necessarily restrict the size of the TB, since for v7
the majority of constant pool usage is for calls from the out-of-line
ldst code, which is already at the end of the TB. But this does
allow us to save one insn per reference on the off-chance.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no point in coding for a 2GB offset when the max TB size
is already limited to 64k. If we further restrict to 32k then we
can eliminate the extra ADDIS instruction.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the TB generates too much code, such that backend relocations
overflow, try again with a smaller TB. In support of this, move
relocation processing from a random place within tcg_out_op, in
the handling of branch opcodes, to a new function at the end of
tcg_gen_code.
This is not a complete solution, as there are additional relocs
generated for out-of-line ldst handling and constant pools.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If a TB generates too much code, try again with fewer insns.
Fixes: https://bugs.launchpad.net/bugs/1824853
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will let backends implement the double-word shift operation.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Will be helpful for s390x. Input 128 bit and output 64 bit only,
which is sufficient for now.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190225154204.26751-1-david@redhat.com>
[rth: Add matching tcg_gen_extract2_i32.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
dump_exec_info() takes an fprintf()-like callback and a FILE * to pass
to it.
Its only caller hmp_info_jit() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-5-armbru@redhat.com>
dump_opcount_info() takes an fprintf()-like callback and a FILE * to
pass to it.
Its only caller hmp_info_opcount() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-4-armbru@redhat.com>
The last update to this file was 9 years ago. In the meantime,
4 of the 6 ideas have actually been completed. The lat two do
not actually make sense anymore.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Due to a cut/paste error in the original implementation, the unsigned
vector saturating arithmetic was erroneously being calculated as signed
vector saturating arithmetic.
Fixes: 8ffafbcec2 ("tcg/i386: Implement vector saturating arithmetic")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190207224258.426-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently, a jump to a label that is not defined anywhere will
be emitted not be relocated. This results in a jump to a random
jump target. With tcg debugging, print a diagnostic to the -d op
file and abort.
This could help debug or detect errors like
c2d9644e6d ("target/arm: Fix crash on conditional instruction in an IT block")
Reported-by: Roman Kapl <code@rkapl.cz>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's either "GNU *Library* General Public version 2" or "GNU Lesser
General Public version *2.1*", but there was no "version 2.0" of the
"Lesser" library. So assume that version 2.1 is meant here.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1548252536-6242-5-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now that all tcg backends support TCG_TARGET_IMPLEMENTS_DYN_TLB,
remove the define and the old code.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disabled in all TCG backends for now.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The avx instruction set does not directly provide MO_64.
We can still implement 64-bit with comparison and vpblendvb.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We handle many of these during integer expansion, and the
rest of them during integer optimization.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the argument register only after we have verified that the
temporary is not already in that register. This case is likely
now that we are back propagating the preferred register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
