Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20221004112100.301935-3-kraxel@redhat.com>
Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-2-kraxel@redhat.com>
Add new firmware feature flags for the recently added confidential
computing operating modes by amd and intel.
While being at it also fix the path to the amd sev documentation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20220930133220.1771336-1-kraxel@redhat.com>
A thread often fails to bind an egl context to itself after guest VM is
rebooted because the context is still owned by another thread. It is not
very clear what condition makes this happen but this can be prevented
by unbinding the context from the thread in the end of gd_egl_switch.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20220928215805.4661-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Extended ClientCutText messages start with a 4-byte header. If len < 4,
an integer underflow occurs in vnc_client_cut_text_ext. The result is
used to decompress data in a while loop in inflate_buffer, leading to
CPU consumption and denial of service. Prevent this by checking dlen in
protocol_client_msg.
Fixes: CVE-2022-3165
Fixes: 0bf41cab93 ("ui/vnc: clipboard support")
Reported-by: TangPeng <tangpeng@qianxin.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Message-Id: <20220925204511.1103214-1-mcascell@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are corner cases where rate->opos can overflow. For
example, if QEMU is started with -audiodev pa,id=audio0,
out.frequency=11025 -device ich9-intel-hda -device hda-duplex,
audiodev=audio0 and the guest plays audio with a sampling
frequency of 44100Hz, rate->opos will overflow after 27.05h
and the audio stream will be silent for a long time.
To prevent a rate->opos and also a rate->ipos overflow, both
are wrapped around after a short time. The wrap around point
rate->ipos >= 0x10001 is an arbitrarily selected value and can
be any small value, 0 and 1 included.
The comment that an ipos overflow will result in an infinite
loop has been removed, because in this case the resampling code
only generates no more output samples and the audio stream stalls.
However, there is no infinite loop.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220923183640.8314-12-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The calculation of the buffer size needed to store audio samples
after resampling is wrong for audio recording. For audio recording
sw->ratio is calculated as
sw->ratio = frontend sample rate / backend sample rate.
From this follows
frontend samples = frontend sample rate / backend sample rate
* backend samples
frontend samples = sw->ratio * backend samples
In 2 of 3 places in the audio recording code where sw->ratio
is used in a calculation to get the number of frontend frames,
the calculation is wrong. Fix this. The 3rd formula in
audio_pcm_sw_read() is correct.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/71
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-11-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split out the code in audio_get_avail() that calculates the
buffer size that the audio frontend can read. This is similar
to the code changes in audio_get_free().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rename and refactor audio_sw_bytes_free(). This function is not
limited to calculate the free audio buffer size. The renamed
function returns the number of frames instead of bytes.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Swap the rate and info parameters of the audio_rate_get_bytes()
function to align the parameter order with the rest of the
audio_rate_*() functions.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace a comment with a question with the answer.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-7-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It seems there is a demand [1] for low latency playback over
SPICE. Add a pcm_ops buffer_get_free function to reduce the
playback latency. The mixing engine buffer becomes a temporary
buffer.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-01/msg01644.html
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The next patch needs two new rate control functions. The first
one returns the bytes needed at call time to maintain the
selected rate. The second one adjusts the bytes actually sent.
Split the audio_rate_get_bytes() function into these two
functions and reintroduce audio_rate_get_bytes().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change the buffer_get_free pcm_ops function to report the free
ALSA playback buffer. The generic buffer becomes a temporary
buffer and is empty after a call to audio_run_out().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Run the downstream playback queue even if the emulated audio
device didn't write new samples. There still may be buffered
audio samples downstream.
This is for the -audiodev out.mixing-engine=off case. Commit
a8a98cfd42 ("audio: run downstream playback queue uncondition-
ally") fixed the out.mixing-engine=on case.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix GUS audio playback with out.mixing-engine=off.
The GUS audio device needs to know the amount of samples to
produce in advance.
To reproduce start qemu with
-parallel none -device gus,audiodev=audio0
-audiodev pa,id=audio0,out.mixing-engine=off
and start the cartoon.exe demo in a FreeDOS guest. The demo file
is available on the download page of the GUSemu32 author.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Refactoring the code in audio_run_out() avoids code duplication
in the next patch. There's no functional change.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- cleanup scripts/ci/setup in advance of ppc64 runner
- ensure detected gdb reported to TCG tests
- update hexagon container with build deps
- move alpine container to tagged release
- fix overflow during qos-test test tree iteration
- allow bios blobs to be built with test cross compilers
- introduce monitor_puts for plain strings
- share disas code between monitor and plugins
- fix bug in execlog plugin
- add more tcg plugin documentation, reorg
- fix link to semihosting spec
- re-factor gdbstub to use AccelClass/Ops
- many gitdm updates
- fix race with plugin mutex lock and linux-user fork()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmM+s+YACgkQ+9DbCVqe
KkSDwgf/Qj0OScOr5Bfw3/KAV0/SFL1vHISb2r5qZVG4DvdY/c/sitPBHPJ8N5jQ
918M8AiI3+4Mb/GwkdYBEyWgVZ5ELOkJTObypa5pwmF1K/xDUlG7ZRmJ9+xkJ44Q
TmrVLQyw6d907B2u+DfqX68AYYnto1yQT/eUo6TiLdIJ5NXIYRn5u34snG9qWHja
b/Dp7DxnoJMS1EhlMhukekCHGGNUeYn4ewIKbsG1EouH5PndzrvP8LRAcWyxv0m4
tD2bEAHCMKqTqefkNgG7GCO3HND1JBfWdckx3OD4hBnMnuNtsZBL23QN7MDytgnv
0JnYSwkWZCuMIt7oKCOXLUbCjQG97Q==
=1vZ4
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-gdbstub-plugins-gitdm-061022-3' of https://github.com/stsquad/qemu into staging
testing, gdbstub, plugin and gitdm updates
- cleanup scripts/ci/setup in advance of ppc64 runner
- ensure detected gdb reported to TCG tests
- update hexagon container with build deps
- move alpine container to tagged release
- fix overflow during qos-test test tree iteration
- allow bios blobs to be built with test cross compilers
- introduce monitor_puts for plain strings
- share disas code between monitor and plugins
- fix bug in execlog plugin
- add more tcg plugin documentation, reorg
- fix link to semihosting spec
- re-factor gdbstub to use AccelClass/Ops
- many gitdm updates
- fix race with plugin mutex lock and linux-user fork()
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmM+s+YACgkQ+9DbCVqe
# KkSDwgf/Qj0OScOr5Bfw3/KAV0/SFL1vHISb2r5qZVG4DvdY/c/sitPBHPJ8N5jQ
# 918M8AiI3+4Mb/GwkdYBEyWgVZ5ELOkJTObypa5pwmF1K/xDUlG7ZRmJ9+xkJ44Q
# TmrVLQyw6d907B2u+DfqX68AYYnto1yQT/eUo6TiLdIJ5NXIYRn5u34snG9qWHja
# b/Dp7DxnoJMS1EhlMhukekCHGGNUeYn4ewIKbsG1EouH5PndzrvP8LRAcWyxv0m4
# tD2bEAHCMKqTqefkNgG7GCO3HND1JBfWdckx3OD4hBnMnuNtsZBL23QN7MDytgnv
# 0JnYSwkWZCuMIt7oKCOXLUbCjQG97Q==
# =1vZ4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Oct 2022 06:54:30 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-gdbstub-plugins-gitdm-061022-3' of https://github.com/stsquad/qemu: (52 commits)
plugins: add [pre|post]fork helpers to linux-user
contrib/gitdm: add Université Grenoble Alpes
contrib/gitdm: add Simon to individual contributors
contrib/gitdm: add China Telecom to the domain map
contrib/gitdm: add ISCAS to the academics group
contrib/gitdm: add WANG Xuerui to individual contributers
contrib/gitdm: add Paul to individual contributors
contrib/gitdm: add mapping for Loongson Technology
accel/kvm: move kvm_update_guest_debug to inline stub
gdbstub: move guest debug support check to ops
gdbstub: move breakpoint logic to accel ops
gdbstub: move sstep flags probing into AccelClass
gdbstub: move into its own sub directory
semihosting: update link to spec
docs/devel: document the test plugins
contrib/plugins: reset skip when matching in execlog
docs/devel: move API to end of tcg-plugins.rst
docs/devel: clean-up qemu invocations in tcg-plugins
plugins: Assert mmu_idx in range before use in qemu_plugin_get_hwaddr
plugins: extend execlog to filter matches
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Special care needs to be taken in ensuring locks are in a consistent
state across fork events. Add helpers so the plugin system can ensure
that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/358
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221004115221.2174499-1-alex.bennee@linaro.org>
again to the academic group map.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220926134609.3301945-7-alex.bennee@linaro.org>
Please confirm this is the correct mapping for you.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Simon Safar <simon@simonsafar.com>
Message-Id: <20220926134609.3301945-2-alex.bennee@linaro.org>
The English website (http://english.is.cas.cn/) in on a slightly
different domain but has the same logo as http://www.iscas.ac.cn/.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20220929114231.583801-51-alex.bennee@linaro.org>
His blog confirms he is not affiliated with Loongson.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Message-Id: <20220929114231.583801-50-alex.bennee@linaro.org>
Also map his old codesourcery address to his canonical address.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paul Brook <paul@nowt.org>
Message-Id: <20220929114231.583801-49-alex.bennee@linaro.org>
Please confirm you are happy with this mapping.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220929114231.583801-48-alex.bennee@linaro.org>
This removes the final hard coding of kvm_enabled() in gdbstub and
moves the check to an AccelOps.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-46-alex.bennee@linaro.org>
As HW virtualization requires specific support to handle breakpoints
lets push out special casing out of the core gdbstub code and into
AccelOpsClass. This will make it easier to add other accelerator
support and reduces some of the stub shenanigans.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-45-alex.bennee@linaro.org>
The support of single-stepping is very much dependent on support from
the accelerator we are using. To avoid special casing in gdbstub move
the probing out to an AccelClass function so future accelerators can
put their code there.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-44-alex.bennee@linaro.org>
This is in preparation of future refactoring as well as cleaning up
the source tree. Aside from the minor tweaks to meson and trace.h this
is pure code motion.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-43-alex.bennee@linaro.org>
The old link has moved but it seems the document is now hosted on
Arm's github along with a license update to CC-BY-SA-4.0.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-42-alex.bennee@linaro.org>
Although the test plugins are fairly basic they are still useful for
some things so we should document their existence.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-41-alex.bennee@linaro.org>
The purpose of the matches was to only track the execution of
instructions we care about. Without resetting skip to the value at the
start of the block we end up dumping all instructions after the match
with the consequent load on the instrumentation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-40-alex.bennee@linaro.org>
The API documentation is quite dry and doesn't flow nicely with the
rest of the document. Move it to its own section at the bottom along
with a little leader text to remind people to update it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-39-alex.bennee@linaro.org>
We currently have the final binaries in the root of the build dir so
the build prefix is superfluous. Additionally add a shell prompt to be
more in line with the rest of the code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-38-alex.bennee@linaro.org>
Coverity reports out-of-bound accesses here. This should be a
false positive due to how the index is decoded from MemOpIdx.
Fixes: Coverity CID 1487201
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20220401190233.329360-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-37-alex.bennee@linaro.org>
Sometimes the whole execlog is just two much so add the ability to
filter by instruction opcode or address.
[AJB: this shows for example
qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max \
-semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin -D plugin.out
the st1w SVE instruction is not instrumenting its stores.]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Message-Id: <20220929114231.583801-36-alex.bennee@linaro.org>
This gets especially confusing if you start plugging in host addresses
from a trace and you wonder why the output keeps changing. Report when
read_memory_func fails instead of blindly disassembling the buffer
contents.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-35-alex.bennee@linaro.org>
Rather than assembling our output piecemeal lets use the same approach
as the plugin disas interface to build the disassembly string before
printing it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-34-alex.bennee@linaro.org>
This helps us construct strings elsewhere before echoing to the
monitor. It avoids having to jump through hoops like:
monitor_printf(mon, "%s", s->str);
It will be useful in following patches but for now convert all
existing plain "%s" printfs to use the _puts api.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-33-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-32-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-31-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-30-alex.bennee@linaro.org>
s390-ccw remains a bit more complex, because the -march=z900 test is done
only for the native cross compiler. Otherwise, all that is needed is
to pass the (now mandatory) target argument to write_target_makefile.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-29-alex.bennee@linaro.org>
Remove the symlink to tests/tcg/config-*.mak, which is possible now
that unused target config files are not created either.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-28-alex.bennee@linaro.org>
Let write_target_makefile handle both host and container cross compilers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-27-alex.bennee@linaro.org>
It will not be specific to tests/tcg anymore, since it will be possible to
build firmware using container-based cross compilers too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-26-alex.bennee@linaro.org>
Further decoupling of tests/tcg from the main QEMU Makefile, and making
the build more similar between the cross compiler case and the vetted
container images.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-25-alex.bennee@linaro.org>
