this device is used to verify the correctness of regression tests by
allowing guests to write their exit status to this device. This is then
used by qemu to exit using the written status.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-4-kbastian@mail.uni-paderborn.de>
Message-Id: <20210512102051.12134-14-alex.bennee@linaro.org>
when trying to run successful short tests from the Makefile timeout would not
terminate. Rather it would wait until the time runs out. Excerpt from the
manpage:
--foreground
when not running timeout directly from a shell prompt,
allow COMMAND to read from the TTY and get TTY signals; in this mode, chil‐
dren of COMMAND will not be timed out
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-3-kbastian@mail.uni-paderborn.de>
Message-Id: <20210512102051.12134-13-alex.bennee@linaro.org>
At least for the TriCore target no easily available c compiler exists.
Thus we need to rely on "as" and "ld". This allows us to run them
through the docker image. We don't test the generation capabilities of
docker images as they are assumed to work.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
[AJB: fix quoting, only handle docker & clear, test -n, tweak commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-12-alex.bennee@linaro.org>
There should only be one compiler per architecture. Those cases where
the same compiler can deal with a different architecture should be
explicitly set for both cross_cc and docker configurations. Otherwise
you get strangeness like:
--cross-cc-aarch64=/bin/false
causing the logic to attempt to use a locally available
arm-linux-gnueabihf-gcc rather than forcing the use of the docker
image which is what is implied by the command line option.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-10-alex.bennee@linaro.org>
We special case this as the container with the cross compiler for the
tests takes so long to build it is manually uploaded into the
registry.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210512102051.12134-9-alex.bennee@linaro.org>
This image is a little special because it takes a long time to build.
As such most users don't want to be doing that and just pull random
binaries from the ether as intended by the container gods. This
involves someone with credentials and a beefy machine running:
make docker-image-debian-hexagon-cross V=1 NOCACHE=1 J=30
docker tag qemu/debian-hexagon-cross registry.gitlab.com/qemu-project/qemu/qemu/debian-hexagon-cross
docker push registry.gitlab.com/qemu-project/qemu/qemu/debian-hexagon-cross
With a suitable binary in the "cloud" a normal user will run:
make docker-image-debian-hexagon-cross
or have it run for them through the dependency mechanism of our
over-engineered makefiles and get the binary they wanted. There are a
few wrinkles of course including needing to tweak the final image to
have the credentials of the user so we can actually do our cross
compiles.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alessandro Di Federico <ale@rev.ng>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Brian Cain <bcain@quicinc.com>
Message-Id: <20210512102051.12134-7-alex.bennee@linaro.org>
This simply wraps up fetching a build from the registry and tagging it
as the local build.
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-6-alex.bennee@linaro.org>
The current user functionality is used for cross compiling to avoid
complications with permissions when building test programs. However
for images that come from the registry we still need the ability to
add the user after the fact.
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-5-alex.bennee@linaro.org>
We're going to extend the abilities of the command shortly.
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-4-alex.bennee@linaro.org>
We have the same symlink chasing problem when doing an "update"
operation. Fix that.
Based-on: 5e33f7fead ("tests/docker: better handle symlinked libs")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210512102051.12134-3-alex.bennee@linaro.org>
- drop block/io write notifiers
- qemu-iotests enhancements to make debugging easier
- rbd parsing fix
- HMP qemu-io fix (for iothreads)
- mirror job cancel relaxation (do not cancel in-flight requests when a
READY mirror job is canceled with force=false)
- document qcow2's data_file and data_file_raw features
- fix iotest 297 for pylint 2.8
- block/copy-on-read refactoring
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAmCeqLwSHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9A9pMIAKYIlLQfSSMdy0fZ+6AHiAjaTZAaDr4G
d6NDz/RONZEoxcl01LkUWJfvqH/IdCLx5q4cl9SU4+JzMdKW9K1xBLdAGousuhk/
geYqymbORj/VntJDYwp30KUlC0pLUBbuuzYN+QXrLp5qJvS9nPBcxEPjfSc6GX9z
Bt+GCRW08+C4WKJ3lGu9zNGe47gTFUE/VodUYG4tKg5xZFzsAWd/PZZaVOdW0fCz
/0tdxN4N82XT+cE/lA0Tm6B6L3ZueMAt8byu4BPz21M7kULNn2roVMiFKJELZlZQ
0RyDXH2jb/aH/ha6gJ4S+JhMvq45rH9GuQeAYl6IPngbta+NbZW+U4w=
=+Kha
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2021-05-14' into staging
Block patches:
- drop block/io write notifiers
- qemu-iotests enhancements to make debugging easier
- rbd parsing fix
- HMP qemu-io fix (for iothreads)
- mirror job cancel relaxation (do not cancel in-flight requests when a
READY mirror job is canceled with force=false)
- document qcow2's data_file and data_file_raw features
- fix iotest 297 for pylint 2.8
- block/copy-on-read refactoring
# gpg: Signature made Fri 14 May 2021 17:43:40 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2021-05-14:
write-threshold: deal with includes
test-write-threshold: drop extra TestStruct structure
test-write-threshold: drop extra tests
block/write-threshold: drop extra APIs
test-write-threshold: rewrite test_threshold_(not_)trigger tests
block: drop write notifiers
block/write-threshold: don't use write notifiers
qemu-iotests: fix pylint 2.8 consider-using-with error
block/copy-on-read: use bdrv_drop_filter() and drop s->active
Document qemu-img options data_file and data_file_raw
qemu-iotests: fix case of SOCK_DIR already in the environment
qemu-iotests: let "check" spawn an arbitrary test command
qemu-iotests: move command line and environment handling from TestRunner to TestEnv
qemu-iotests: allow passing unittest.main arguments to the test scripts
qemu-iotests: do not buffer the test output
mirror: stop cancelling in-flight requests on non-force cancel in READY
monitor: hmp_qemu_io: acquire aio contex, fix crash
block/rbd: Add an escape-aware strchr helper
iotests/231: Update expected deprecation message
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCeiMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpqsIH/A49Av5Bv8huL75lf9GzCx3E1a/z2W9Fphik
OcQ1ahR+7CRDARub+vTG40MBmZBVefIWjLAj3BwBWzFGPX0DZq0zeI102VzlEVKY
OeUx8ixuiKOSLcS+QxE7ZXIBL2Pn7l+MFUi4nLMYKti7c/kola7zlB57qsmXh+VD
AOQ7Utj6NWoi6QocWJsMSCyHCh3Fk9QzcStLlr6/MkSJa1zqv8l22+8oWH07Fk2M
wZfhrm9k094on28iSejsFYL5e4ROeXUajbOdfyMIxWvAB7boC9Jxk/e0oAbuSB4y
2f71Gfk3mU6irS7PvrxcKbk6BVD2zxM2WumOchZJgxFAujDO6yg=
=fvkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: bugfixes, improvements
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/virt.c
As it's only used inside hw/virtio/vhost-vdpa.c.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20210413133737.1574-1-yuzenghui@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds ioeventfd flag for virtio-mmio configuration.
It allows switching ioeventfd on and off.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161700379211.1135943.8859209566937991305.stgit@pasha-ThinkPad-X280>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Type 41 defines the attributes of devices that are onboard. The
original intent was to imply the BIOS had some level of control over
the enablement of the associated devices.
If network devices are present in this table, by default, udev will
name the corresponding interfaces enoX, X being the instance number.
Without such information, udev will fallback to using the PCI ID and
this usually gives ens3 or ens4. This can be a bit annoying as the
name of the network card may depend on the order of options and may
change if a new PCI device is added earlier on the commande line.
Being able to provide SMBIOS type 41 entry ensure the name of the
interface won't change and helps the user guess the right name without
booting a first time.
This can be invoked with:
$QEMU -netdev user,id=internet
-device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \
-smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev
The PCI segment is assumed to be 0. This should hold true for most
cases.
$ dmidecode -t 41
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x2900, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard LAN
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:09.0
$ ip -brief a
lo UNKNOWN 127.0.0.1/8 ::1/128
eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Message-Id: <20210401171138.62970-1-vincent@bernat.ch>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
checkfilename() doesn't always set $acpi_testexpected. Fix the following
warning:
Use of uninitialized value $acpi_testexpected in string eq at
./scripts/checkpatch.pl line 1529.
Fixes: d2f1af0e41 ("checkpatch: don't emit warning on newly created acpi data files")
Cc: isaku.yamahata@intel.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <161786467973.295167.5612704777283969903.stgit@bahia.lan>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows the virtio-scsi-pci device to batch the setup of all its
host notifiers. This significantly improves boot time of VMs with a
high number of vCPUs, e.g. from 6m5.563s down to 1m2.884s for a
pseries machine with 384 vCPUs.
Note that memory_region_transaction_commit() must be called before
virtio_bus_cleanup_host_notifier() because the latter might close
ioeventfds that the transaction still assumes to be around when it
commits.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210407143501.244343-5-groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Host notifiers are guaranteed to be idle until the callbacks are
hooked up with virtio_queue_aio_set_host_notifier_handler(). They
thus don't need to be set or unset with the AioContext lock held.
Do this outside the critical section, like virtio-blk already
does : basically downgrading virtio_scsi_vring_init() to only
setup the host notifier and set the callback in the caller.
This will allow to batch addition/deletion of ioeventds in
a single memory transaction, which is expected to greatly
improve initialization time.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210407143501.244343-4-groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows the virtio-blk-pci device to batch the setup of all its
host notifiers. This significantly improves boot time of VMs with a
high number of vCPUs, e.g. from 3m26.186s down to 0m58.023s for a
pseries machine with 384 vCPUs.
Note that memory_region_transaction_commit() must be called before
virtio_bus_cleanup_host_notifier() because the latter might close
ioeventfds that the transaction still assumes to be around when it
commits.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210407143501.244343-3-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When dataplane multiqueue support was added in QEMU 2.7, the path
that would rollback guest notifiers assignment in case of error
simply got dropped.
Later on, when Error was added to blk_set_aio_context() in QEMU 4.1,
another error path was introduced, but it ommits to rollback both
host and guest notifiers.
It seems cleaner to fix the rollback path in one go. The patch is
simple enough that it can be adjusted if backported to a pre-4.1
QEMU.
Fixes: 51b04ac5c6 ("virtio-blk: dataplane multiqueue support")
Cc: stefanha@redhat.com
Fixes: 97896a4887 ("block: Add Error to blk_set_aio_context()")
Cc: kwolf@redhat.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210407143501.244343-2-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The get_vmstate_memory_region() method from PCDIMMDeviceClass is only
ever called from this class and is never overridden, so it can be converted
into an ordinary function.
This saves us from having to do an indirect call in order to reach it.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <f42da25471dc4b967796642388294e61e6587047.1619303649.git.maciej.szmigiero@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Address was swapped with value when writing MMIO registers, so the user
saw garbage in lot of cases. The interrupt status was not correctly set.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-Id: <20210427110504.10878-1-rka@sysgo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"qemu/typedefs.h" is enough for include/block/write-threshold.h header
with forward declaration of BlockDriverState. Also drop extra includes
from block/write-threshold.c and tests/unit/test-write-threshold.c
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210506090621.11848-9-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We don't need this extra logic: it doesn't make code simpler.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-8-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Testing set/get of one 64bit variable doesn't seem necessary. We have a
lot of such variables. Also remaining tests do test set/get anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-7-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_write_threshold_exceeded() is unused.
bdrv_write_threshold_is_set() is used only to double check the value of
bs->write_threshold_offset in tests. No real sense in it (both tests do
check real value with help of bdrv_write_threshold_get())
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[mreitz: Adjusted commit message as per Eric's suggestion]
Signed-off-by: Max Reitz <mreitz@redhat.com>
These tests use bdrv_write_threshold_exceeded() API, which is used only
for test (since pre-previous commit). Better is testing real API, which
is used in block.c as well.
So, let's call bdrv_write_threshold_check_write(), and check is
bs->write_threshold_offset cleared or not (it's cleared iff threshold
triggered).
Also we get rid of BdrvTrackedRequest use here. Note, that paranoiac
bdrv_check_request() calls were added in 8b1170012b to protect
BdrvTrackedRequest. Drop them now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-4-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
They are unused now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-3-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
write-notifiers are used only for write-threshold. New code for such
purpose should create filters.
Let's better special-case write-threshold and drop write notifiers at
all. (Actually, write-threshold is special-cased anyway, as the only
user of write-notifiers)
So, create a new direct interface for bdrv_co_write_req_prepare() and
drop all write-notifier related logic from write-threshold.c.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[mreitz: Adjusted comment as per Eric's suggestion]
Signed-off-by: Max Reitz <mreitz@redhat.com>
pylint 2.8 introduces consider-using-with error, suggesting
to use the 'with' block statement when possible.
Modify all subprocess.Popen call to use the 'with' statement,
except the one in __init__ of QemuIoInteractive class, since
it is assigned to a class field and used in other methods.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210510190449.65948-1-eesposit@redhat.com>
[mreitz: Disable bad-option-value warning in the iotests' pylintrc, so
that disabling consider-using-with in QemuIoInteractive will
not produce a warning in pre-2.8 pylint versions]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now, after huge update of block graph permission update algorithm, we
don't need this workaround with active state of the filter. Drop it and
use new smart bdrv_drop_filter() function.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210506194143.394141-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The contents of this patch were initially developed and posted by Han
Han[1], however, it appears the original patch was not applied. Since
then, the relevant documentation has been moved and adapted to a new
format.
I've taken most of the original wording and tweaked it according to
some of the feedback from the original patch submission. I've also
adapted it to restructured text, which is the format the documentation
currently uses.
[1] https://lists.nongnu.org/archive/html/qemu-block/2019-10/msg01253.html
Fixes: https://bugzilla.redhat.com/1763105
Signed-off-by: Han Han <hhan@redhat.com>
Suggested-by: Max Reitz <mreitz@redhat.com>
[ Max: provided description of data_file_raw behavior ]
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210505195512.391128-1-ckuehl@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Due to a typo, in this case the SOCK_DIR was not being created.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210323181928.311862-6-pbonzini@redhat.com>
Message-Id: <20210503110110.476887-6-pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Right now there is no easy way for "check" to print a reproducer command.
Because such a reproducer command line would be huge, we can instead teach
check to start a command of our choice. This can be for example a Python
unit test with arguments to only run a specific subtest.
Move the trailing empty line to print_env(), since it always looks better
and one caller was not adding it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210323181928.311862-5-pbonzini@redhat.com>
Message-Id: <20210503110110.476887-5-pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In the next patch, "check" will learn how to execute a test script without
going through TestRunner. To enable this, keep only the text output
and subprocess handling in the TestRunner; move into TestEnv the logic
to prepare for running a subprocess.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210323181928.311862-4-pbonzini@redhat.com>
Message-Id: <20210503110110.476887-4-pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Python test scripts that use unittest consist of multiple tests.
unittest.main allows selecting which tests to run, but currently this
is not possible because the iotests wrapper ignores sys.argv.
unittest.main command line options also allow the user to pick the
desired options for verbosity, failfast mode, etc. While "-d" is
currently translated to "-v", it also enables extra debug output,
and other options are not available at all.
These command line options only work if the unittest.main testRunner
argument is a type, rather than a TestRunner instance. Therefore, pass
the class name and "verbosity" argument to unittest.main, and adjust for
the different default warnings between TextTestRunner and unittest.main.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210323181928.311862-3-pbonzini@redhat.com>
Message-Id: <20210503110110.476887-3-pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of buffering the test output into a StringIO, patch it on
the fly by wrapping sys.stdout's write method. This can be
done unconditionally, even if using -d, which makes execute_unittest
a bit simpler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210323181928.311862-2-pbonzini@redhat.com>
Message-Id: <20210503110110.476887-2-pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If mirror is READY than cancel operation is not discarding the whole
result of the operation, but instead it's a documented way get a
point-in-time snapshot of source disk.
So, we should not cancel any requests if mirror is READ and
force=false. Let's fix that case.
Note, that bug that we have before this commit is not critical, as the
only .bdrv_cancel_in_flight implementation is nbd_cancel_in_flight()
and it cancels only requests waiting for reconnection, so it should be
rare case.
Fixes: 521ff8b779
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210421075858.40197-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Max reported the following bug:
$ ./qemu-img create -f raw src.img 1G
$ ./qemu-img create -f raw dst.img 1G
$ (echo '
{"execute":"qmp_capabilities"}
{"execute":"blockdev-mirror",
"arguments":{"job-id":"mirror",
"device":"source",
"target":"target",
"sync":"full",
"filter-node-name":"mirror-top"}}
'; sleep 3; echo '
{"execute":"human-monitor-command",
"arguments":{"command-line":
"qemu-io mirror-top \"write 0 1G\""}}') \
| x86_64-softmmu/qemu-system-x86_64 \
-qmp stdio \
-blockdev file,node-name=source,filename=src.img \
-blockdev file,node-name=target,filename=dst.img \
-object iothread,id=iothr0 \
-device virtio-blk,drive=source,iothread=iothr0
crashes:
0 raise () at /usr/lib/libc.so.6
1 abort () at /usr/lib/libc.so.6
2 error_exit
(err=<optimized out>,
msg=msg@entry=0x55fbb1634790 <__func__.27> "qemu_mutex_unlock_impl")
at ../util/qemu-thread-posix.c:37
3 qemu_mutex_unlock_impl
(mutex=mutex@entry=0x55fbb25ab6e0,
file=file@entry=0x55fbb1636957 "../util/async.c",
line=line@entry=650)
at ../util/qemu-thread-posix.c:109
4 aio_context_release (ctx=ctx@entry=0x55fbb25ab680) at ../util/async.c:650
5 bdrv_do_drained_begin
(bs=bs@entry=0x55fbb3a87000, recursive=recursive@entry=false,
parent=parent@entry=0x0,
ignore_bds_parents=ignore_bds_parents@entry=false,
poll=poll@entry=true) at ../block/io.c:441
6 bdrv_do_drained_begin
(poll=true, ignore_bds_parents=false, parent=0x0, recursive=false,
bs=0x55fbb3a87000) at ../block/io.c:448
7 blk_drain (blk=0x55fbb26c5a00) at ../block/block-backend.c:1718
8 blk_unref (blk=0x55fbb26c5a00) at ../block/block-backend.c:498
9 blk_unref (blk=0x55fbb26c5a00) at ../block/block-backend.c:491
10 hmp_qemu_io (mon=0x7fffaf3fc7d0, qdict=<optimized out>)
at ../block/monitor/block-hmp-cmds.c:628
man pthread_mutex_unlock
...
EPERM The mutex type is PTHREAD_MUTEX_ERRORCHECK or
PTHREAD_MUTEX_RECURSIVE, or the mutex is a robust mutex, and the
current thread does not own the mutex.
So, thread doesn't own the mutex. And we have iothread here.
Next, note that AIO_WAIT_WHILE() documents that ctx must be acquired
exactly once by caller. But where is it acquired in the call stack?
Seems nowhere.
qemuio_command do acquire aio context.. But we need context acquired
around blk_unref() as well and actually around blk_insert_bs() too.
Let's refactor qemuio_command so that it doesn't acquire aio context
but callers do that instead. This way we can cleanly acquire aio
context in hmp_qemu_io() around all three calls.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210423134233.51495-1-vsementsov@virtuozzo.com>
[mreitz: Fixed comment]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sometimes the parser needs to further split a token it has collected
from the token input stream. Right now, it does a cursory check to see
if the relevant characters appear in the token to determine if it should
break it down further.
However, qemu_rbd_next_tok() will escape characters as it removes tokens
from the token stream and plain strchr() won't. This can make the
initial strchr() check slightly misleading since it implies
qemu_rbd_next_tok() will find the token and split on it, except the
reality is that qemu_rbd_next_tok() will pass over it if it is escaped.
Use a custom strchr to avoid mixing escaped and unescaped string
operations. Furthermore, this code is identical to how
qemu_rbd_next_tok() seeks its next token, so incorporate this custom
strchr into the body of that function to reduce duplication.
Reported-by: Han Han <hhan@redhat.com>
Fixes: https://bugzilla.redhat.com/1873913
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210421212343.85524-3-ckuehl@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The deprecation message in the expected output has technically been
wrong since the wrong version of a patch was applied to it. Because of
this, the test fails. Correct the expected output so that it passes.
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210421212343.85524-2-ckuehl@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch set adds a bus multiplexer and the necessary infrastructure
in the I2C code to allow it to work.
These are common on systems with lots of I2C devices, like an IPMI BMC.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmCdnpcACgkQYfOMkJGb
/4EG7BAAkUB1QbYzUChbTqVwrjxBcYmcSSdehKcZlACr9oIjwH/EutKdve/qt+fE
xCHkxQAo1s+cFMoV0aFlE0UuwSxR42JwuALQcbz0UNGk0uJsgglVS65qqpwQkbiO
pRnbW7ZjOxVpcjwvP9RvOIaBabUnEvNqrA7SUqs5+yPZVfhi0NqJ0DHZuvv/5L9c
DV96Adv2UIKA1vqw6aOBULWm5J5zRN+6IjacZ2Qd7xQplilUcJQ5ZqiYskHF9LuT
NuXoBMk5Dqqy01LYDdnjwxHAUEG31hIhtoaWgqW9AIlPuHUSxesZNsy/3BKZzWhD
JX5WfKwkAzWx5pfVbmRzNSG8XqHR5nJqOdaJdWsSl2MGgjQ1/MtoIV/uLMozSVu3
5arQ7frhCXA2Dy1ozPiqIhrdiNlOHDKRTsu468o5eyxzAf+FclVPPZoKsQttaOA9
eNu+RNFY/nKCW8iAOPdSV4gQ9QwvUv3Z91lVOQjEiBbll3Iix/3r0/bZmQRArLzY
6WX0hVrhGIqdCFv5aVar0uFZz1n/G6nv3RBo6a6C72Tf+8KvjMrfA/mAXmQLJ/o1
j0s7G65lE9blyRmg7aBrfASTBPsT+JocIqeLMdMLIVxAAJLhpnQtjSRILmPy9zjl
TMicA5MEC4BlXqGTJNoMTlOVyG7iC5VZ5qkeFPe1q5A/b5HxwyM=
=IamZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-v1' into staging
Add a bus multiplexer device
This patch set adds a bus multiplexer and the necessary infrastructure
in the I2C code to allow it to work.
These are common on systems with lots of I2C devices, like an IPMI BMC.
# gpg: Signature made Thu 13 May 2021 22:48:07 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/for-qemu-6.1-v1:
hw/i2c: add pca954x i2c-mux switch
hw/i2c: move search to i2c_scan_bus method
hw/i2c: add match method for device search
hw/i2c: name I2CNode list in I2CBus
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
