As a failure of g_malloc() will result in QEMU exiting, it
won't return a NULL to check. As such, drop the incorrect handling
of such NULL returns in the cdat table building code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As g_malloc0/g_malloc() will just exit QEMU on failure there is no
point in checking for it failing.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The callback for building CDAT tables may return negative error codes.
This was previously unhandled and will result in potentially huge
allocations later on in ct3_build_cdat()
Detect the negative error code and defer cdat building.
Fixes: f5ee7413d5 ("hw/mem/cxl-type3: Add CXL CDAT Data Object Exchange")
Cc: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
s->smmu_pcibus_by_bus_num is a SMMUPciBus pointer cache indexed
by bus number, bus number may not always be a fixed value,
i.e., guest reboot to different kernel which set bus number with
different algorithm.
This could lead to smmu_iommu_mr() providing the wrong iommu MR.
Suggested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240125073706.339369-3-zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
s->iommu_pcibus_by_bus_num is a IOMMUPciBus pointer cache indexed
by bus number, bus number may not always be a fixed value,
i.e., guest reboot to different kernel which set bus number with
different algorithm.
This could lead to endpoint binding to wrong iommu MR in
virtio_iommu_get_endpoint(), then vfio device setup wrong
mapping from other device.
Remove the memset in virtio_iommu_device_realize() to avoid
redundancy with memset in system reset.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240125073706.339369-2-zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Due to my own limitation on bandwidth, I noticed that unfortunately I won't
have time to review VT-d patches at least in the near future. Meanwhile I
expect a lot of possibilities could actually happen in this area in the
near future.
To reflect that reality, I decided to drop myself from the VT-d role. It
shouldn't affect much since we still have Jason around like usual, and
Michael on top. But I assume it'll always be good if anyone would like to
fill this role up.
I'll still work on QEMU. So I suppose anyone can still copy me if one
thinks essential.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20240118091035.48178-1-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
There is no "size" field in vring address structure. Remove it.
Fixes: 5fc0e00291 ("Add vhost-user protocol documentation")
Signed-off-by: Andrey Ignatov <rdna@apple.com>
Message-Id: <20240112004555.64900-1-rdna@apple.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VIA south bridges are able to relocate and toggle (enable or disable) their
SuperI/O functions. So far this is hardcoded such that all functions are always
enabled and are located at fixed addresses.
Some PC BIOSes seem to probe for I/O occupancy before activating such a function
and issue an error in case of a conflict. Since the functions are currently
enabled on reset, conflicts are always detected. Prevent that by implementing
relocation and toggling of the SuperI/O functions.
Note that all SuperI/O functions are now deactivated upon reset (except for
VT82C686B's serial ports where Fuloong 2e's rescue-yl seems to expect them to be
enabled by default). Rely on firmware to configure the functions accordingly.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-12-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a preparation for implementing relocation and toggling of SuperI/O
functions in the VT8231 device model. Upon reset, all SuperI/O functions will be
deactivated, so in case if no -bios is given, let the machine configure those
functions the same way Pegasos II firmware would do.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-11-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_parallel_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-10-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_serial_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_fdc_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some SuperI/O devices such as the VIA south bridges or the PC87312 controller
allow to enable or disable their SuperI/O functions. Add a convenience function
for implementing this in the VIA south bridges.
The naming of the functions is inspired by its memory_region_set_enabled()
pendant.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some SuperI/O devices such as the VIA south bridges or the PC87312 controller
are able to relocate their SuperI/O functions. Add a convenience function for
implementing this in the VIA south bridges.
This convenience function relies on previous simplifications in exec/ioport
which avoids some duplicate synchronization of I/O port base addresses. The
naming of the function is inspired by its memory_region_set_address() pendant.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
portio_list_add_1() creates a MemoryRegionPortioList instance which holds a
MemoryRegion `mr` and an array of MemoryRegionPortio elements named `ports`.
Each element in the array gets assigned the same value for its .base attribute.
The same value also ends up as the .addr attribute of `mr` due to the
memory_region_add_subregion() call. This means that all .base attributes are
the same as `mr.addr`.
The only usages of MemoryRegionPortio::base were in portio_read() and
portio_write(). Both functions get above MemoryRegionPortioList as their
opaque parameter. In both cases find_portio() can only return one of the
MemoryRegionPortio elements of the `ports` array. Due to above observation any
element will have the same .base value equal to `mr.addr` which is also
accessible.
Hence, `mrpio->mr.addr` is equivalent to `mrp->base` and
MemoryRegionPortio::base is redundant and can be removed.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ParallelState::portio_list isn't used inside ParallelState context but only
inside ISAParallelState context, so move it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
FDCtrl::iomem isn't used inside FDCtrl context but only inside FDCtrlSysBus
context, so move it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
FDCtrl::portio_list isn't used inside FDCtrl context but only inside
FDCtrlISABus context, so move it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240106132546.21248-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU populates the apic_state attribute of x86 CPUs if supported by real
hardware or if SMP is active. When handling interrupts, it just checks whether
apic_state is populated to route the interrupt to the PIC or to the APIC.
However, chapter 10.4.3 of [1] requires that:
When IA32_APIC_BASE[11] is 0, the processor is functionally equivalent to an
IA-32 processor without an on-chip APIC.
This means that when apic_state is populated, QEMU needs to check for the
MSR_IA32_APICBASE_ENABLE flag in addition. Implement this which fixes some
real-world BIOSes.
[1] Intel 64 and IA-32 Architectures Software Developer's Manual, Vol. 3A:
System Programming Guide, Part 1
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240106132546.21248-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The if statement currently uses double negation when executing the else branch.
So swap the branches and simplify the condition to make the code more
comprehensible.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240106132546.21248-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit adds XTSup configuration to let user choose to whether enable
this feature or not. When XTSup is enabled, additional bytes in IRTE with
enabled guest virtual VAPIC are used to support 32-bit destination id.
Additionally, this commit exports IVHD type 0x11 besides the old IVHD type
0x10 in ACPI table. IVHD type 0x10 does not report full set of IOMMU
features only the legacy ones, so operating system (e.g. Linux) may only
detects x2APIC support if IVHD type 0x11 is available. The IVHD type 0x10
is kept so that old operating system that only parses type 0x10 can detect
the IOMMU device.
Besides, an amd_iommu-stub.c file is created to provide the definition for
amdvi_extended_feature_register when CONFIG_AMD_IOMMU=n. This function is
used by acpi-build.c to get the extended feature register value for
building the ACPI table. When CONFIG_AMD_IOMMU=y, this function is defined
in amd_iommu.c.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-7-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the instructions in bios-tables-test, this lists that IVRS.ivrs
in ACPI table will be changed to add new IVHD type 0x11.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-6-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As userspace APIC now supports x2APIC, intel interrupt remapping
hardware can be set to EIM mode when userspace local APIC is used.
Suggested-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-5-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit adds support for x2APIC transitions when writing to
MSR_IA32_APICBASE register and finally adds CPUID_EXT_X2APIC to
TCG_EXT_FEATURES.
The set_base in APICCommonClass now returns an integer to indicate error in
execution. apic_set_base return -1 on invalid APIC state transition,
accelerator can use this to raise appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-4-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit extends the APIC ID to 32-bit long and remove the 255 max APIC
ID limit in userspace APIC. The array that manages local APICs is now
dynamically allocated based on the max APIC ID of created x86 machine.
Also, new x2APIC IPI destination determination scheme, self IPI and x2APIC
mode register access are supported.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-3-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit creates apic_register_read/write which are used by both
apic_mem_read/write for MMIO access and apic_msr_read/write for MSR access.
The apic_msr_read/write returns -1 on error, accelerator can use this to
raise the appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-2-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch derives vhost-user-input from vhost-user-base class, so make
the input stub as a simpler boilerplate wrapper.
With the refactoring, vhost-user-input adds the property 'chardev', this
leads to conflict with the vhost-user-input-pci adds the same property.
To resolve the error, remove the duplicate property from
vhost-user-input-pci.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231120043721.50555-5-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-input is in the input folder. On the other hand, the folder
'hw/virtio' maintains other virtio stubs (e.g. I2C, RNG, GPIO, etc).
This patch moves vhost-user-input into the virtio folder for better code
organization. No functionality change.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231120043721.50555-4-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds basic documentation for vhost-user-input.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Message-Id: <20231120043721.50555-3-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-10-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Virtio input device invokes set_config() callback for retrieving
the event configuration info, but the callback is not supported in
vhost-user-base.
This patch adds support set_config() callback in vhost-user-base.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231120043721.50555-2-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-9-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make it clear the vhost-user-device is intended for expert use only.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-8-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of the new base class and make
vhost-user-i2c a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now the new base class supports config handling we can take advantage
and make vhost-user-gpio a much simpler boilerplate wrapper. Also as
this doesn't require any target specific hacks we only need to build
the stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of our new base class and make
vhost-user-rng a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are about to convert at least one stubs which was using the async
teardown so lets use it for all the cases.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-3-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lets keep a cleaner split between the base class and the derived
vhost-user-device which we can use for generic vhost-user stubs. This
includes an update to introduce the vq_size property so the number of
entries in a virtq can be defined.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's an alias for "ringbuf" we kept for backward compatibility; see
commit 3a1da42eb3 (qapi: Rename ChardevBackend member "memory" to
"ringbuf"). Deprecation is long overdue.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240203080228.2766159-5-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Character backends are actually QOM types. When a backend's
compile-time conditional QOM type is not compiled in, creation fails
with "'FOO' is not a valid char driver name". Okay, except
introspecting chardev-add with query-qmp-schema doesn't work then: the
backend type is there even though the QOM type isn't.
A management application can work around this issue by using
qom-list-types instead.
Fix the issue anyway: add the conditionals to the QAPI schema.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240203080228.2766159-4-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_socket() and make_udp_socket() return a file descriptor on
success, -1 on failure. The check misinterprets 0 as failure. Fix
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240203080228.2766159-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The __linux__ version of qemu_chr_open_pp_fd() tries to claim the
parport device with a PPCLAIM ioctl(). On success, it stores the file
descriptor in the chardev object, and returns success. On failure, it
closes the file descriptor, and returns failure.
chardev_new() then passes the Chardev to object_unref(). This duly
calls char_parallel_finalize(), which closes the file descriptor
stored in the chardev object. Since qemu_chr_open_pp_fd() didn't
store it, it's still zero, so this closes standard input. Ooopsie.
To demonstate, add a unit test. With the bug above unfixed, running
this test closes standard input. char_hotswap_test() happens to run
next. It opens a socket, duly gets file descriptor 0, and since it
tests for success with > 0 instead of >= 0, it fails.
The new unit test needs to be conditional exactly like the chardev it
tests. Since the condition is rather complicated, steal the solution
from the serial chardev: define HAVE_CHARDEV_PARALLEL in qemu/osdep.h.
This also permits simplifying chardev/meson.build a bit.
The bug fix is easy enough: store the file descriptor, and leave
closing it to char_parallel_finalize().
The next commit will fix char_hotswap_test()'s test for success.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240203080228.2766159-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Test fixed up for BSDs, indentation fixed up, commit message improved]
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmXLxQweHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfn3UH/2blaWblrlMBQlGQ
fkQOI2IGCJ5yRuh70roTY2aPnUyfc70IvZMvYtHElRD0UqYaQgxSjBbnmsqdS+9c
IKJG3qlDbnu0GBKKpxw9pmtHJ5NsaAl9E9jLZEX6ISu2rWrBHt4XisZhz8U5cVuc
dmlM4onk2F3+UcfGh4ACPNwtbYqQHEfWwsLuYPdyDdI647Vs6fEgIjeixBi3BcpN
lzyzquu/AB5SMXRnKaP5CUHC01TM/US2HuZfZ4PzyA0CmIi1od4RHE1iEN7JNWyC
ki/dasFoELfeoEU/6JrfPOx65v+91hhkBzN+oC4eV3r5COQkmW7PTmlqS269sH5w
SZsOWcM=
=T2mw
-----END PGP SIGNATURE-----
Merge tag 'qemu-sparc-20240213' of https://github.com/mcayland/qemu into staging
qemu-sparc queue
# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmXLxQweHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfn3UH/2blaWblrlMBQlGQ
# fkQOI2IGCJ5yRuh70roTY2aPnUyfc70IvZMvYtHElRD0UqYaQgxSjBbnmsqdS+9c
# IKJG3qlDbnu0GBKKpxw9pmtHJ5NsaAl9E9jLZEX6ISu2rWrBHt4XisZhz8U5cVuc
# dmlM4onk2F3+UcfGh4ACPNwtbYqQHEfWwsLuYPdyDdI647Vs6fEgIjeixBi3BcpN
# lzyzquu/AB5SMXRnKaP5CUHC01TM/US2HuZfZ4PzyA0CmIi1od4RHE1iEN7JNWyC
# ki/dasFoELfeoEU/6JrfPOx65v+91hhkBzN+oC4eV3r5COQkmW7PTmlqS269sH5w
# SZsOWcM=
# =T2mw
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 13 Feb 2024 19:37:48 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* tag 'qemu-sparc-20240213' of https://github.com/mcayland/qemu: (88 commits)
esp.c: add my copyright to the file
esp.c: switch TypeInfo registration to use DEFINE_TYPES() macro
esp.c: keep track of the DRQ state during DMA
esp.c: rename irq_data IRQ to drq_irq
esp.c: implement DMA Transfer Pad command for DATA phases
esp.c: replace n variable with len in esp_do_nodma()
esp.c: consolidate DMA and PDMA logic in STATUS and MESSAGE IN phases
esp.c: remove redundant n variable in PDMA COMMAND phase
esp.c: consolidate DMA and PDMA logic in MESSAGE OUT phase
esp.c: consolidate DMA and PDMA logic in DATA IN phase
esp.c: consolidate DMA and PDMA logic in DATA OUT phase
esp.c: only transfer non-DMA MESSAGE OUT phase data for specific commands
esp.c: only transfer non-DMA COMMAND phase data for specific commands
esp.c: improve ESP_RSEQ logic consolidation
esp.c: handle non-DMA FIFO writes used to terminate DMA commands
esp.c: remove restriction on FIFO read access when DMA memory routines defined
esp.c: handle TC underflow for DMA SCSI requests
esp.c: don't clear the SCSI phase when reading ESP_RINTR
esp.c: ensure that STAT_INT is cleared when reading ESP_RINTR
esp.c: consolidate end of command sequence after ICCS command
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This series has involved rewriting and/or updating a considerable part of the ESP
emulation so update the copyright in esp.c to reflect this.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-89-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The use of the DEFINE_TYPES() macro will soon be recommended over the use of
calling type_init() directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240112125420.514425-88-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently the DRQ IRQ is updated every time DMA data is sent/received which
is both inefficient and causes excessive logging of the DRQ state. Add a
new drq_state bool that only updates the DRQ IRQ if its state changes.
This commit adds the new drq_state bool to the migration state: since the
version number has already been increased earlier in the series, there is
no need to repeat it again here. The DRQ IRQ is (currently) only used for
PDMA transfers which already have a migration break in this series so
there are no problems setting its value post-load.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-87-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The IRQ represented by irq_data is actually the DRQ (DMA request) line so rename
it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-86-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The Transfer Pad command is used to either drop incoming FIFO data during the
DATA IN phase or generate a series of zero bytes in the FIFO during the DATA
OUT phase.
Implement the DMA Transfer Pad command for the DATA phases which is used by
the NeXTCube firmware in the DATA IN phase to ignore part of the incoming SCSI
data as it is copied into memory.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-85-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This brings esp_do_nodma() in line with esp_do_dma().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-84-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
