This tests times out in an IBM POWER host when compiled with
--disable-tcg.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-7-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
All tests of this file, when running in an IBM POWER host and with
--disable-tcg, fail in a similar manner:
Command: ./qemu-system-ppc -display none -vga none (...)
-cpu 7400 (...)
Output: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
PPC KVM module is not loaded. Try modprobe kvm_pr.
qemu-system-ppc: failed to initialize kvm: Invalid argument
We don't have a way of telling which KVM module is loaded in a Power
host (kvm_hv or kvm_pr). For now let's make all the tests of this
file depend on TCG support.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Running this test without TCG support in an IBM POWER server results
in the following error:
Command: ./qemu-system-ppc -display none -vga none (...)
-machine ref405ep (...)
Output: qemu-system-ppc: Register sync failed... If you're using
kvm-hv.ko, only "-cpu host" is possible
qemu-system-ppc: kvm_init_vcpu: kvm_arch_init_vcpu failed (0): Invalid argument
Although the host is running kvm_hv we don't have a way of differentiate
between kvm_hv and kvm_pr, meaning that this test would've failed in the
same way if kvm_pr was the KVM module loaded in the host.
Since we don't have a way of checking which KVM module is being loaded
when using avocado, make a TCG accel check in test_ppc_ref405ep().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Running this test gives us a deprecation warning telling that this
machine type is no longer supported:
Output: qemu-system-ppc: Machine type 'taihu' is deprecated:
incomplete, use 'ref405ep' instead
Moreover, this test fails to pass running in an IBM POWER host when
building QEMU with --disable-tcg.
Since the machine type is already being considered deprecated let's not
bother fixing the test with --disable-tcg. Remove test_ppc_taihu().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This test breaks when run in an IBM POWER host with a QEMU compiled
with --disable-tcg and the ppc-softmmu target in a similar manner as
test_ppc_g3beige did.
There's also an observation made about kvm_pr in the error message:
Command: ./qemu-system-ppc -display none -vga none (...)
-machine mac99 (...)
Output: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
PPC KVM module is not loaded. Try modprobe kvm_pr.
qemu-system-ppc: failed to initialize kvm: Invalid argument
This means that, when/if we're able to detect kvm_pr support in these
avocado tests, we can revisit this test to not rely solely on TCG
availability.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This test breaks when run in an IBM POWER host with a QEMU compiled
with --disable-tcg and the ppc-softmmu target.
One thing to note is that the error message explictly mentions kvm_pr
support:
Command: ./qemu-system-ppc -display none -vga none (...)
-machine g3beige (...)
Output: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
PPC KVM module is not loaded. Try modprobe kvm_pr.
qemu-system-ppc: failed to initialize kvm: Invalid argument
The host was running kvm_hv, not kvm_pr, and the machine failed to load.
Unfortunately we don't have a way to detect whether the KVM module loaded
is kvm_hv or kvm_pr - we do a check for /dev/kvm to detect KVM support but
both modules create this file so that's not helpful.
Let's skip this test for now until we have a way of detecting kvm_pr support in the host.
Reported-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The icount framework relies on TCG availability. If QEMU is built with
--disable-tcg we won't have icount either, and then this test will fail
with the following message in an IBM POWER9 host:
tests/avocado/replay_kernel.py:ReplayKernelNormal.test_ppc64_pseries:
ERROR: ConnectError: Failed to establish session:
(...)
/11-tests_avocado_replay_kernel.py_ReplayKernelNormal.test_ppc64_pseries/replay.bin:
cannot configure icount, TCG support not available
Although this was revealed in a specific ppc64 scenario, the TCG check
is being done in the common code inside run_vm() because all archs need
TCG to have access to icount.
Cc: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220303153517.168943-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some ppc64 hosts (e.g. IBM POWER hosts) aren't able to run the e500
machine using KVM accel. Skip this test if TCG accel isn't available.
Cc: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220303153517.168943-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PowerNV8/9 machines does not work with KVM acceleration, meaning
that boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8/9 tests
will always fail when QEMU is compiled with --disable-tcg:
ERROR 1-tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8
-> VMLaunchFailure: ConnectError: Failed to establish session:
[Errno 104] Connection reset by peer
Exit code: 1
Command: ./qemu-system-ppc64 -display none -vga none -chardev socket,id=mon,path=/var/tmp/avo_qemu_sock_no19zg0m/qemu-1936936-7fffa77cff98-monitor.sock -mon chardev=mon,mode=control -machine powernv8 -chardev socket,id=console,path=/var/tmp/avo_qemu_sock_no19zg0m/qemu-1936936-7fffa77cff98-console.sock,server=on,wait=off -serial chardev:console -kernel /home/danielhb/avocado/data/cache/by_location/4514304e2c4ee84c5f0b5c8bacedda783891df68/zImage.epapr -append console=tty0 console=hvc0 -device pcie-pci-bridge,id=bridge1,bus=pcie.1,addr=0x0 -device nvme,bus=pcie.2,addr=0x0,serial=1234 -device e1000e,bus=bridge1,addr=0x3 -device nec-usb-xhci,bus=bridge1,addr=0x2
Output: qemu-system-ppc64: The powernv machine does not work with KVM acceleration
Let's add the TCG accel requirement in both tests to skip them if we
don't have TCG support available.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220303153517.168943-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
'boot-serial-test' does not work with a QEMU built with --disable-tcg in
a IBM POWER9 host. The reason is that without TCG QEMU will default to
KVM acceleration, but then the KVM module in IBM POWER hosts aren't able
to handle other CPUs.
The result is that the test will break with a KVM error when trying to
ruin the ppce500 test:
$ QTEST_QEMU_BINARY=./qemu-system-ppc64 ./tests/qtest/boot-serial-test
/ppc64/boot-serial/ppce500: qemu-system-ppc64: -accel tcg: invalid accelerator tcg
error: kvm run failed Invalid argument
NIP 0000000000f00000 LR 0000000000000000 CTR 0000000000000000 XER 0000000000000000 CPU#0
MSR 0000000000000000 HID0 0000000000000000 HF 24020002 iidx 1 didx 1
TB 00000000 00000000 DECR 0
(...)
** (./tests/qtest/boot-serial-test:1935760): ERROR **: 07:44:03.010: Failed to find expected string. Please check '/tmp/qtest-boot-serial-sJ78sqg'
Fix it by checking CONFIG_TCG before compiling boot-serial-test.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220303153517.168943-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
'prom-env-test' is a TCG test that will fail if QEMU is compiled with
--disable-tcg:
$ QTEST_QEMU_BINARY=./qemu-system-ppc64 ./tests/qtest/prom-env-test
/ppc64/prom-env/mac99: qemu-system-ppc64: -accel tcg: invalid accelerator tcg
(... hangs indefinitely ...)
Fix it by checking CONFIG_TCG before compiling prom-env-test.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220303153517.168943-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmIoiAMeHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfcn0H+wfeA9uKZ9DNc20O
XDkq2lnUiEyrKsZrVn8jRlw/zHnuElX2WmMGckisJpcaBpZSwlypHBhrjssUXu7v
nHlrOYqoKxiYFSZVPj1n+P849BW3LKNgcA5/njA87QUjMOCW6eq4Sp9beDsSbw57
cPAXUhGNI4uvLh6ew9aoxz01KhBSY1hFMmX0U6gcDx48f5cr/NU81+Vae0+Ks3B+
BPbYjED3yr7G6nu63MT63WXlAnKBQpndkjbVYubQCwVJqLRBb6p37Gm81KXozpos
QxF9miWdzA2dRCrSutcAd84rTWq2w8T2Wf2sW3B8lXNy+s+qTSnvsiOUjoaESzv7
UKXmYZE=
=RwkZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/q800-updates-for-7.0-20220309' into staging
q800-updates-for-7.0 queue
# gpg: Signature made Wed 09 Mar 2022 10:57:07 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/q800-updates-for-7.0-20220309: (22 commits)
esp: recreate ESPState current_req after migration
esp: include the current PDMA callback in the migration stream
esp: convert ESPState pdma_cb from a function pointer to an integer
esp: introduce esp_pdma_cb() function
esp: introduce esp_set_pdma_cb() function
macfb: set initial value of mode control registers in macfb_common_realize()
macfb: add VMStateDescription fields for display type and VBL timer
macfb: increase number of registers saved in MacfbState
macfb: don't use special irq_state and irq_mask variables in MacfbState
macfb: add VMStateDescription for MacfbNubusState and MacfbSysBusState
macio/pmu.c: remove redundant code
mos6522: implement edge-triggering for CA1/2 and CB1/2 control line IRQs
mac_via: make SCSI_DATA (DRQ) bit live rather than latched
mos6522: record last_irq_levels in mos6522_set_irq()
mos6522: add "info via" HMP command for debugging
mos6522: add register names to register read/write trace events
mos6522: use device_class_set_parent_reset() to propagate reset to parent
mos6522: remove update_irq() and set_sr_int() methods from MOS6522DeviceClass
mos6522: switch over to use qdev gpios for IRQs
mac_via: use IFR bit flag constants for VIA2 IRQs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix for a potential memory leak
* Aspeed SMC cleanups on the definition of the number of flash devices
* New bletchley-bmc machine, AST2600 based
-----BEGIN PGP SIGNATURE-----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=5VHm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20220308' into staging
aspeed queue:
* Fix for a potential memory leak
* Aspeed SMC cleanups on the definition of the number of flash devices
* New bletchley-bmc machine, AST2600 based
# gpg: Signature made Tue 08 Mar 2022 08:19:25 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-aspeed-20220308:
hw: aspeed_gpio: Cleanup stray semicolon after switch
hw/arm/aspeed: add Bletchley machine type
hw/arm/aspeed: allow missing spi_model
hw/block: m25p80: Add support for w25q01jvq
aspeed/smc: Fix error log
aspeed/smc: Let the SSI core layer define the bus name
aspeed/smc: Rename 'max_peripherals' to 'cs_num_max'
aspeed/smc: Remove 'num_cs' field
aspeed: Rework aspeed_board_init_flashes() interface
aspeed/smc: Use max number of CE instead of 'num_cs'
aspeed: Fix a potential memory leak bug in write_boot_rom()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Dan Berrange: Allow qemu-nbd to support TLS over Unix sockets
- Eric Blake: Minor cleanups related to 64-bit block operations
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmImtE8ACgkQp6FrSiUn
Q2ovmgf/aksDqf2eNcahs++fez+8Qi9ll5OY/qGyjnzBgsatYKjrK+xF7OnjoJox
eRX026lh81Q4EQK7oZBUnr2UCY4bncDBTI7MTLh603EV/tId5ZLwx007ERhzvtC1
mIsQHXNuO9X25LQG2eWnfunY9YztQpiT5r/g3khD2yPBqJWIvBfblzPLx6FkF7px
/WM8xEKCihmGr1Wr3b+zGYL083YkaBWCvHoR8mJt3tEFUj+Qie8XcdV0OVyI0XUj
5goIFRcpVwBE8P2nLtfUKNzEXz22cmdonOJUX7E5IvGO21k5F/HrWlHdo8JnuSUZ
t0w5L9yCxBrRpY1burz30b77J0WMCw==
=C8Dd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2022-03-07' into staging
nbd patches for 2022-03-07
- Dan Berrange: Allow qemu-nbd to support TLS over Unix sockets
- Eric Blake: Minor cleanups related to 64-bit block operations
# gpg: Signature made Tue 08 Mar 2022 01:41:35 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2022-03-07:
qemu-io: Allow larger write zeroes under no fallback
qemu-io: Utilize 64-bit status during map
nbd/server: Minor cleanups
tests/qemu-iotests: validate NBD TLS with UNIX sockets and PSK
tests/qemu-iotests: validate NBD TLS with UNIX sockets
tests/qemu-iotests: validate NBD TLS with hostname mismatch
tests/qemu-iotests: convert NBD TLS test to use standard filters
tests/qemu-iotests: introduce filter for qemu-nbd export list
tests/qemu-iotests: expand _filter_nbd rules
tests/qemu-iotests: add QEMU_IOTESTS_REGEN=1 to update reference file
block/nbd: don't restrict TLS usage to IP sockets
qemu-nbd: add --tls-hostname option for TLS certificate validation
block/nbd: support override of hostname for TLS certificate validation
block: pass desired TLS hostname through from block driver client
crypto: mandate a hostname when checking x509 creds on a client
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since PDMA reads/writes are driven by the guest, it is possible that migration
can occur whilst a SCSIRequest is still active. Fortunately active SCSIRequests
are already included in the migration stream and restarted post migration but
this still leaves the reference in ESPState uninitialised.
Implement the SCSIBusInfo .load_request callback to obtain a reference to the
currently active SCSIRequest and use it to recreate ESPState current_req
after migration.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This involves (re)adding a PDMA-specific subsection to hold the reference to the
current PDMA callback.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This prepares for the inclusion of the current PDMA callback in the migration
stream since the callback is referenced by an integer instead of a function
pointer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This function is to be used to execute the current PDMA callback rather than
dereferencing the ESPState pdma_cb function pointer directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This function is to be used to set the current PDMA callback rather than
accessing the ESPState pdma_cb function pointer directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
If booting Linux directly in the q800 machine using -kernel rather than using a
MacOS toolbox ROM, the mode control registers are never initialised,
causing macfb_mode_write() to fail to determine the current resolution after
migration. Resolve this by always setting the initial values of the mode control
registers based upon the initial macfb properties during realize.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
These fields are required in the migration stream to restore macfb state
correctly.
Note this is a migration break, but since there are upcoming incompatible changes
for the q800 machine (and migration does not even succeed without these patches)
then this is not an issue.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The MacOS toolbox ROM accesses a number of addresses between 0x0 and 0x200 during
initialisation and resolution changes. Whilst the function of many of these
registers is unknown, it is worth the minimal cost of saving these extra values as
part of migration to help future-proof the migration stream for the q800 machine
as it starts to stabilise.
Note this is a migration break, but since there are upcoming incompatible changes
for the q800 machine (and migration does not even succeed without these patches)
then this is not an issue.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The current IRQ state and IRQ mask are handled exactly the same as standard
register accesses, so store these values directly in the regs array rather
than having separate variables for them.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently when QEMU tries to migrate the macfb framebuffer it crashes randomly
because the opaque provided by the DeviceClass vmsd property for both devices
is set to MacfbState rather than MacfbNubusState or MacfbSysBusState as
appropriate.
Resolve the issue by adding new VMStateDescriptions for MacfbNubusState and
MacfbSysBusState which embed the existing vmstate_macfb VMStateDescription
within them using VMSTATE_STRUCT.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that the logic related to edge-triggered interrupts is all contained within
the mos6522 device the redundant implementation for the mac99 PMU device can
be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The mos6522 datasheet describes how the control lines IRQs are edge-triggered
according to the configuration in the PCR register. Implement the logic according
to the datasheet so that the interrupt bits in IFR are latched when the edge is
detected, and cleared when reading portA/portB or writing to IFR as necessary.
To maintain bisectibility this change also updates the SCSI, SCSI data, Nubus
and VIA2 60Hz/1Hz clocks in the q800 machine to be negative edge-triggered as
confirmed by the PCR programming in all of Linux, NetBSD and MacOS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The VIA2 on the Q800 machine is not a separate chip as in older Macs but instead
is integrated into the on-board logic. From analysing the SCSI routines in the
MacOS toolbox ROM (and to a lesser extent NetBSD and Linux) the expectation seems
to be that the SCSI_DATA (DRQ) bit is live on the Q800 and not latched.
Fortunately we can use the recently introduced mos6522 last_irq_levels variable
which tracks the edge-triggered state to return the SCSI_DATA (DRQ) bit live to
the guest OS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220305150957.5053-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To detect edge-triggered IRQs it is necessary to store the last state of each
IRQ in a last_irq_levels bitmap.
Note: this is a migration break for machines which use mos6522 instances which
are g3beige/mac99 (PPC) and q800 (m68k).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This displays detailed information about the device registers and timers to aid
debugging problems with timers and interrupts.
Currently the QAPI generators for HumanReadableText don't work correctly if
used in qapi/target-misc.json when a non-specified target is built, so for
now manually add a hmp_info_via() wrapper until direct support for per-device
HMP/QMP commands is implemented.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This helps to follow how the guest is programming the mos6522 when debugging.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220305150957.5053-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Switch from using a legacy approach to the more formal approach for propagating
device reset to the parent.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that the mos6522 IRQs are managed using standard qdev gpios these methods
are no longer required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
For historical reasons each mos6522 instance implements its own setting and
update of the IFR flag bits using methods exposed by MOS6522DeviceClass. As
of today this is no longer required, and it is now possible to implement
the mos6522 IRQs as standard qdev gpios.
Switch over to use qdev gpios for the mos6522 device and update all instances
accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows us to easily see how the physical control lines are mapped to the
IFR bit flags.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220305150957.5053-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows us to easily see how the physical control lines are mapped to the
IFR bit flags.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
These are intended to make it easier to see how the physical control lines
are wired for each instance.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220305150957.5053-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmImipMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD5AH/jz73VVDE3dZTtsdEH/f2tuO8uosur9fIjHJ
nCMwBoosdDWmrWjrwxynmG6e+qIcOHEGdTInvS1TY2OTU+elNNTiR57pWiljXRsJ
2kNIXKp4dXaYI/bxmKUzKSoVscyWxL686ND4U8sZhuppSNrWpLmMUNgwqmYjQQLV
yd2JpIKgZYnzShPnJMDtF3ItcCHetY6jeB28WAclKywIEuCTmjulYCTaH5ujroG9
rykMaQIjoe/isdmCcBx05UuMxH61vf5L8pR06N6e3GO9T2/Y/hWuteVoEJaCQvNa
+zIyL2hOjGuMKr+icLo9c42s3yfwWNsRfz87wqdAY47yYSyc1wo=
=3NVe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 07 Mar 2022 22:43:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (47 commits)
hw/acpi/microvm: turn on 8042 bit in FADT boot architecture flags if present
tests/acpi: i386: update FACP table differences
hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table
tests/acpi: i386: allow FACP acpi table changes
docs: vhost-user: add subsection for non-Linux platforms
configure, meson: allow enabling vhost-user on all POSIX systems
vhost: use wfd on functions setting vring call fd
event_notifier: add event_notifier_get_wfd()
pci: drop COMPAT_PROP_PCP for 2.0 machine types
hw/smbios: Add table 4 parameter, "processor-id"
x86: cleanup unused compat_apic_id_mode
vhost-vsock: detach the virqueue element in case of error
pc: add option to disable PS/2 mouse/keyboard
acpi: pcihp: pcie: set power on cap on parent slot
pci: expose TYPE_XIO3130_DOWNSTREAM name
pci: show id info when pci BDF conflict
hw/misc/pvpanic: Use standard headers instead
headers: Add pvpanic.h
pci-bridge/xio3130_downstream: Fix error handling
pci-bridge/xio3130_upstream: Fix error handling
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# docs/specs/index.rst
Being explicit about the accelerator used on these tests is a good
thing in itself, but it will also be used in the filtering rules
applied on "make check-avocado".
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220225210156.2032055-6-crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
isa_init_irq() has become a trivial one-line wrapper for isa_get_irq().
It can therefore be removed.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> (tpm_tis_isa)
Acked-by: Corey Minyard <cminyard@mvista.com> (isa_ipmi_bt, isa_ipmi_kcs)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220301220037.76555-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-14-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Now that the last users of ISADevice::isairq[] have been resolved during the
previous commits, it can be removed for good.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-13-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
All isabus_dev_print() did was to print up to two IRQ numbers per
device. This is redundant if the IRQ numbers are present as QOM
properties (see e.g. the modified tests/qemu-iotests/172.out).
Now that the last devices relying on isabus_dev_print() had their IRQ
numbers QOM'ified, the contribution of this function ultimately became
redundant. Remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-12-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Exposing the IRQ numbers as QOM properties not only allows them to be
configurable but also to be printed by standard QOM mechanisms. This
allows isabus_dev_print() to be retired eventually.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-11-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Exposing the IRQ number as a QOM property not only allows it to be
configurable but also to be printed by standard QOM mechanisms. This allows
isabus_dev_print() to be retired eventually.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-10-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Exposing the IRQ number as a QOM property not only allows it to be
configurable but also to be displayed in HMP:
Before:
(qemu) info qtree
...
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
lost_tick_policy = "discard"
After:
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
irq = 8 (0x8)
lost_tick_policy = "discard"
The reason the IRQ number didn's show up before is that this device does not
call isa_init_irq().
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-9-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Now that gt64120_register() lost its pic parameter, there is an
opportunity to remove it. gt64120_register() is old style by wrapping
qdev API, and the new style is to use qdev directly. So take the
opportunity and modernize the code.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220217101924.15347-8-shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
