These variables should be target_ulong. If truncated to int,
the bool conditions they indicate will be wrong.
As satp is very important for Linux, this bug almost fails every boot.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124539.222868-1-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Version: GnuPG v1
iQEcBAABAgAGBQJhRE8cAAoJEO8Ells5jWIRY08H/3IZ2sVgJhMUUK1HrMQwF+WX
lIEwyNSYI2dlyDtlR0/gJG8jatRa15EW3WVn7ukhlNYWHmLqrRVpteA+xtqsgs8n
Mjh/csZqNi2PoC7I6Ec6BxfXE84zinieN+OrxY5Rel0ol6Of5nY1pKZ9Z2nBMR9l
6Z3Ufy6soSMHjSE9PQ2lY5LjjjNLz5HJoL6HRXN/oVF7JHgy9QffZgdgpcwh7djz
cCetUjnPIBkk0C59ENM3an872cP6Is/CeUoDXTacukGNWJsJng4YplvJrBy3bU40
tYSBTw98LIi453ppMNKbthM72Jjk6VfQLWtaSWKQfVXEvciGXCKTwbNB7ZWalFY=
=fW1/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 17 Sep 2021 09:17:32 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
virtio-net: fix use after unmap/free for sg
ebpf: only include in system emulators
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With Apple Silicon available to the masses, it's a good time to add support
for driving its virtualization extensions from QEMU.
This patch adds all necessary architecture specific code to get basic VMs
working, including save/restore.
Known limitations:
- WFI handling is missing (follows in later patch)
- No watchpoint/breakpoint support
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-5-agraf@csgraf.de
[PMM: added missing #include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need to install a migration helper for the ARM hvf backend.
Let's introduce an arch callback for the overall hvf init chain to
do so.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-4-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hvf's permission bitmap during and after dirty logging does not include
the HV_MEMORY_EXEC permission. At least on Apple Silicon, this leads to
instruction faults once dirty logging was enabled.
Add the bit to make it work properly.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-3-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need PMC register definitions in accel specific code later.
Move all constant definitions to common arm headers so we can reuse
them.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-2-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During sbsa acs level 3 testing, it is seen that the GIC maintenance
interrupts are not triggered and the related test cases fail. This
is because we were incorrectly passing the value of the MISR register
(from maintenance_interrupt_state()) to qemu_set_irq() as the level
argument, whereas the device on the other end of this irq line
expects a 0/1 value.
Fix the logic to pass a 0/1 level indication, rather than a
0/not-0 value.
Fixes: c5fc89b36c ("hw/intc/arm_gicv3: Implement gicv3_cpuif_virt_update()")
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210915205809.59068-1-shashi.mallela@linaro.org
[PMM: tweaked commit message; collapsed nested if()s into one]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move an ifndef CONFIG_USER_ONLY code block up in arm_cpu_reset() so
it can be merged with another earlier one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210914120725.24992-4-peter.maydell@linaro.org
There's no particular reason why the exclusive monitor should
be only cleared on reset in system emulation mode. It doesn't
hurt if it isn't cleared in user mode, but we might as well
reduce the amount of code we have that's inside an ifdef.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210914120725.24992-3-peter.maydell@linaro.org
Currently all of the M-profile specific code in arm_cpu_reset() is
inside a !defined(CONFIG_USER_ONLY) ifdef block. This is
unintentional: it happened because originally the only
M-profile-specific handling was the setup of the initial SP and PC
from the vector table, which is system-emulation only. But then we
added a lot of other M-profile setup to the same "if (ARM_FEATURE_M)"
code block without noticing that it was all inside a not-user-mode
ifdef. This has generally been harmless, but with the addition of
v8.1M low-overhead-loop support we ran into a problem: the reset of
FPSCR.LTPSIZE to 4 was only being done for system emulation mode, so
if a user-mode guest tried to execute the LE instruction it would
incorrectly take a UsageFault.
Adjust the ifdefs so only the really system-emulation specific parts
are covered. Because this means we now run some reset code that sets
up initial values in the FPCCR and similar FPU related registers,
explicitly set up the registers controlling FPU context handling in
user-emulation mode so that the FPU works by design and not by
chance.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/613
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210914120725.24992-2-peter.maydell@linaro.org
Coverity points out that if the PDB file we're trying to read
has a header specifying a block_size of zero then we will
end up trying to divide by zero in pdb_ds_read_file().
Check for this and fail cleanly instead.
Fixes: Coverity CID 1458869
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20210910170656.366592-3-philmd@redhat.com
Message-Id: <20210901143910.17112-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Coverity points out that we aren't checking the return value
from curl_easy_setopt().
Fixes: Coverity CID 1458895
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20210910170656.366592-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When you run QEMU with an Aspeed machine and a single serial device
using stdio like this:
qemu -machine ast2600-evb -drive ... -serial stdio
The guest OS can read and write to the UART5 registers at 0x1E784000 and
it will receive from stdin and write to stdout. The Aspeed SoC's have a
lot more UART's though (AST2500 has 5, AST2600 has 13) and depending on
the board design, may be using any of them as the serial console. (See
"stdout-path" in a DTS to check which one is chosen).
Most boards, including all of those currently defined in
hw/arm/aspeed.c, just use UART5, but some use UART1. This change adds
some flexibility for different boards without requiring users to change
their command-line invocation of QEMU.
I tested this doesn't break existing code by booting an AST2500 OpenBMC
image and an AST2600 OpenBMC image, each using UART5 as the console.
Then I tested switching the default to UART1 and booting an AST2600
OpenBMC image that uses UART1, and that worked too.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210901153615.2746885-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
UART5 is typically used as the default debug UART on the AST2600, but
UART1 is also designed to be a debug UART. All the AST2600 UART's have
semi-configurable clock rates through registers in the System Control
Unit (SCU), but only UART5 works out of the box with zero-initialized
values. The rest of the UART's expect a few of the registers to be
initialized to non-zero values, or else the clock rate calculation will
yield zero or undefined (due to a divide-by-zero).
For reference, the U-Boot clock rate driver here shows the calculation:
https://github.com/facebook/openbmc-uboot/blob/15f7e0dc01d8/drivers/clk/aspeed/clk_ast2600.c#L357
To summarize, UART5 allows selection from 4 rates: 24 MHz, 192 MHz, 24 /
13 MHz, and 192 / 13 MHz. The other UART's allow selecting either the
"low" rate (UARTCLK) or the "high" rate (HUARTCLK). UARTCLK and HUARTCLK
are configurable themselves:
UARTCLK = UXCLK * R / (N * 2)
HUARTCLK = HUXCLK * HR / (HN * 2)
UXCLK and HUXCLK are also configurable, and depend on the APLL and/or
HPLL clock rates, which also derive from complicated calculations. Long
story short, there's lots of multiplication and division from
configurable registers, and most of these registers are zero-initialized
in QEMU, which at best is unexpected and at worst causes this clock rate
driver to hang from divide-by-zero's. This can also be difficult to
diagnose, because it may cause U-Boot to hang before serial console
initialization completes, requiring intervention from gdb.
This change just initializes all of these registers with default values
from the datasheet.
To test this, I used Facebook's AST2600 OpenBMC image for "fuji", with
the following diff applied (because fuji uses UART1 for console output,
not UART5).
@@ -323,8 +323,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
}
/* UART - attach an 8250 to the IO space as our UART5 */
- serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART5], 2,
- aspeed_soc_get_irq(s, ASPEED_DEV_UART5),
+ serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART1], 2,
+ aspeed_soc_get_irq(s, ASPEED_DEV_UART1),
38400, serial_hd(0), DEVICE_LITTLE_ENDIAN);
/* I2C */
Without these clock rate registers being initialized, U-Boot hangs in
the clock rate driver from a divide-by-zero, because the UART1 clock
rate register reads return zero, and there's no console output. After
initializing them with default values, fuji boots successfully.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
[ clg: Removed _PARAM suffix ]
Message-Id: <20210906134023.3711031-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Witherspoon uses the DPS310 as a temperature sensor. Rainier uses it as
a temperature and humidity sensor.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210629142336.750058-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This contains some hardcoded register values that were obtained from the
hardware after reading the temperature.
It does enough to test the Linux kernel driver. The FIFO mode, IRQs and
operation modes other than the default as used by Linux are not modelled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210616073358.750472-2-joel@jms.id.au>
[ clg: - Fixed sequential reading
- Reworked regs_reset_state array
- Moved model under hw/sensor/ ]
Message-Id: <20210629142336.750058-4-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is the latest revision of the ASPEED 2600 SoC. As there is no
need to model multiple revisions of the same SoC for the moment,
update the SCU AST2600 to model the A3 revision instead of the A1 and
adapt the AST2600 SoC and machines.
Reset values are taken from v8 of the datasheet.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[ clg: - Introduced an Aspeed "ast2600-a3" SoC class
- Commit log update ]
Message-Id: <20210629142336.750058-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These are the devices documented by the Rainier device tree. With this
we can see the guest discovering the multiplexers and probing the eeprom
devices:
i2c i2c-2: Added multiplexed i2c bus 16
i2c i2c-2: Added multiplexed i2c bus 17
i2c i2c-2: Added multiplexed i2c bus 18
i2c i2c-2: Added multiplexed i2c bus 19
i2c-mux-gpio i2cmux: 4 port mux on 1e78a180.i2c-bus adapter
at24 20-0050: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
i2c i2c-4: Added multiplexed i2c bus 20
at24 21-0051: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
i2c i2c-4: Added multiplexed i2c bus 21
at24 22-0052: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
Signed-off-by: Joel Stanley <joel@jms.id.au>
[ clg: Introduced aspeed_eeprom_init ]
Message-Id: <20210629142336.750058-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There was a bit of a thinko in the state calculation where every odd pin
in was reported in e.g. "pwm0" mode rather than "off". This was the
result of an incorrect bit shift for the 2-bit field representing each
LED state.
Fixes: a90d8f8467 ("misc/pca9552: Add qom set and get")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210723043624.348158-1-andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There are two GPIO controllers in the ast2600; one is 3.3V and the other
is 1.8V.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210713065854.134634-4-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no need to define the registers relative to the 0x800 offset
where the controller is mapped, as the device is instantiated as it's
own model at the correct memory address.
Simplify the defines and remove the offset to save future confusion.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210713065854.134634-3-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The logic in the handling for the control register required toggling the
enable state for writes to stick. Rework the condition chain to allow
sequential writes that do not update the enable state.
Fixes: 854123bf8d ("wdt: Add Aspeed watchdog device model")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210709053107.1829304-3-andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
While some of the critical fields remain the same, there is variation in
the definition of the control register across the SoC generations.
Reserved regions are adjusted, while in other cases the mutability or
behaviour of fields change.
Introduce a callback to sanitize the value on writes to ensure model
behaviour reflects the hardware.
Fixes: 854123bf8d ("wdt: Add Aspeed watchdog device model")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210709053107.1829304-2-andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
According to its dts file in the Linux kernel, we need mac0 and mac1 enabled
instead of mac1 and mac2. Also, g220a is based on aspeed-g5 (ast2500) which
doesn't even have the third interface.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210810035742.550391-1-linux@roeck-us.net>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Commit 7582591ae7 ("aspeed: Support AST2600A1 silicon revision") switched
the silicon revision for AST2600 to revision A1. On revision A1, the first
Ethernet interface is operational. Enable it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210808200457.889955-1-linux@roeck-us.net>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Two minor fixes; one for performance, the other seccomp
on s390x.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GMdE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20210916' into staging
virtiofsd pull 2021-08-16
Two minor fixes; one for performance, the other seccomp
on s390x.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Thu 16 Sep 2021 14:51:38 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-20210916:
virtiofsd: Reverse req_list before processing it
tools/virtiofsd: Add fstatfs64 syscall to the seccomp allowlist
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When mergeable buffer is enabled, we try to set the num_buffers after
the virtqueue elem has been unmapped. This will lead several issues,
E.g a use after free when the descriptor has an address which belongs
to the non direct access region. In this case we use bounce buffer
that is allocated during address_space_map() and freed during
address_space_unmap().
Fixing this by storing the elems temporarily in an array and delay the
unmap after we set the the num_buffers.
This addresses CVE-2021-3748.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: fbe78f4f55 ("virtio-net support")
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
eBPF files are being included in user emulators, which is useless and
also breaks compilation because ebpf/trace-events is only processed
if a system emulator is included in the build.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/566
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We're not ready to enforce f-strings everywhere, so just silence this
new warning.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210916182248.721529-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A few new annoyances. Of note is the new warning for an unspecified
encoding when opening a text file, which actually does indicate a
potentially real problem; see
https://www.python.org/dev/peps/pep-0597/#motivation
Use LC_CTYPE to determine an encoding to use for interpreting QEMU's
terminal output. Note that Python states: "language code and encoding
may be None if their values cannot be determined" -- use a platform
default as a backup.
Notes: Passing encoding=None will generate a suppressed warning on
Python 3.10+ that 'None' should not be passed as the encoding
argument. This behavior may be deprecated in the future and the default
switched to be a ubiquitous UTF-8. Opting in to the locale default will
be done by passing the encoding 'locale', but that isn't available in
3.6 through 3.9. Presumably this warning will be unsuppressed some time
prior to the actual switch and we can re-investigate these issues at
that time if necessary.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210916182248.721529-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In do_setsockopt(), the code path for the options which take a struct
ip_mreq_source (IP_BLOCK_SOURCE, IP_UNBLOCK_SOURCE,
IP_ADD_SOURCE_MEMBERSHIP and IP_DROP_SOURCE_MEMBERSHIP) fails to
check the return value from lock_user(). Handle this in the usual
way by returning -TARGET_EFAULT.
(In practice this was probably harmless because we'd pass a NULL
pointer to setsockopt() and the kernel would then return EFAULT.)
Fixes: Coverity CID 1459987
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210809155424.30968-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
With the thread pool disabled, we add the requests in the queue to a
GList, processing by iterating over there afterwards.
For adding them, we're using "g_list_prepend()", which is more
efficient but causes the requests to be processed in reverse order,
breaking the read-ahead and request-merging optimizations in the host
for sequential operations.
According to the documentation, if you need to process the request
in-order, using "g_list_prepend()" and then reversing the list with
"g_list_reverse()" is more efficient than using "g_list_append()", so
let's do it that way.
Testing on a spinning disk (to boost the increase of read-ahead and
request-merging) shows a 4x improvement on sequential write fio test:
Test:
fio --directory=/mnt/virtio-fs --filename=fio-file1 --runtime=20
--iodepth=16 --size=4G --direct=1 --blocksize=4K --ioengine libaio
--rw write --name seqwrite-libaio
Without "g_list_reverse()":
...
Jobs: 1 (f=1): [W(1)][100.0%][w=22.4MiB/s][w=5735 IOPS][eta 00m:00s]
seqwrite-libaio: (groupid=0, jobs=1): err= 0: pid=710: Tue Aug 24 12:58:16 2021
write: IOPS=5709, BW=22.3MiB/s (23.4MB/s)(446MiB/20002msec); 0 zone resets
...
With "g_list_reverse()":
...
Jobs: 1 (f=1): [W(1)][100.0%][w=84.0MiB/s][w=21.5k IOPS][eta 00m:00s]
seqwrite-libaio: (groupid=0, jobs=1): err= 0: pid=716: Tue Aug 24 13:00:15 2021
write: IOPS=21.3k, BW=83.1MiB/s (87.2MB/s)(1663MiB/20001msec); 0 zone resets
...
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20210824131158.39970-1-slp@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The virtiofsd currently crashes on s390x when doing something like
this in the guest:
mkdir -p /mnt/myfs
mount -t virtiofs myfs /mnt/myfs
touch /mnt/myfs/foo.txt
stat -f /mnt/myfs/foo.txt
The problem is that the fstatfs64 syscall is called in this case
from the virtiofsd. We have to put it on the seccomp allowlist to
avoid that the daemon gets killed in this case.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2001728
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210914123214.181885-1-thuth@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The sparc_cpu_dump_state() function is only called within
the same file. Make it static.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210916084002.1918445-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
../target/avr/translate.c: In function ‘gen_jmp_ez’:
../target/avr/translate.c:1012:22: error: implicit conversion from ‘enum <anonymous>’ to ‘DisasJumpType’ [-Werror=enum-conversion]
1012 | ctx->base.is_jmp = DISAS_LOOKUP;
| ^
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Message-Id: <20210706180936.249912-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Although we have long supported 'qemu-img convert -o
backing_file=foo,backing_fmt=bar', the fact that we have a shortcut -B
for backing_file but none for backing_fmt has made it more likely that
users accidentally run into:
qemu-img: warning: Deprecated use of backing file without explicit backing format
when using -B instead of -o. For similarity with other qemu-img
commands, such as create and compare, add '-F $fmt' as the shorthand
for '-o backing_fmt=$fmt'. Update iotest 122 for coverage of both
spellings.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210913131735.1948339-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split checking for reserved bits out of aligned offset check.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
- use g_autofree for l1_table
- better name for size in bytes variable
- reduce code blocks nesting
- whitespaces, braces, newlines
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
