Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Coverity notes that we forgot to check the error return from
lock_user() in one place in the handling of the UHI_plog semihosting
call. Add the missing error handling.
report_fault() is rather brutal in that it will call abort(), but
this is the same error-handling used in the rest of this file.
Resolves: Coverity CID 1490684
Fixes: ea4210600d ("target/mips: Avoid qemu_semihosting_log_out for UHI_plog")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220719191737.384744-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Delay generating the exception until after we know the
insn length, and record that length in env->error_code.
Fixes: 8ec7e3c53d ("target/mips: Use an exception for semihosting")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1126
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Inline these macros into the only two callers.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220628111701.677216-9-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
With semihosting_get_arg, we already have a check vs argc, so
there's no point replicating it -- just check the result vs NULL.
Merge copy_argn_to_target into its caller.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-8-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Always log the assert locally. Do not report_fault, but
instead include the fact of the fault in the assertion.
Don't bother freeing allocated strings before the abort().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-6-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use semihost_sys_write and/or qemu_semihosting_console_write
for implementing plog. When using gdbstub, copy the temp
string below the stack so that gdb has a guest address from
which to perform the log.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-5-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This separates guest file descriptors from host file descriptors,
and utilizes shared infrastructure for integration with gdbstub.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-4-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We don't implement it with _WIN32 hosts, and the syscall
is missing from the gdb remote file i/o interface.
Since we can't implement it universally, drop it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The UHI specification does not have an EFAULT value,
and further specifies that "undefined UHI operations
should not return control to the target".
So, log the error and abort.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-2-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch introduces Octeon-specific decoder and implements
check-bit-and-jump instructions.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165572672705.167724.16667636081912075906.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch adds decodetree for Cavium Octeon extension and
an instruction set extension flag for using it in CPU models.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165572672162.167724.13656301229517693806.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We don't implement it with _WIN32 hosts, and the syscalls
are missing from the gdb remote file i/o interface.
Since we can't implement them universally, drop them.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From the Unified Hosting Interface, MD01069 Reference Manual,
version 1.1.6, 06 July 2015.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Within do_interrupt, we hold the iothread lock, which
is required for Chardev access for the console, and for
the round trip for use_gdb_syscalls().
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have a subdirectory for semihosting; move this file out of exec.
Rename to emphasize the contents are a replacement for the functions
in linux-user/bsd-user uaccess.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Switch statements for the code segments that handle nanoMIPS
instruction pools P.LL, P.SC, P.SHIFT, P.LS.S1, P.LS.E0, PP.LSXS
do not have proper default case, resulting in not generating
reserved instruction exception for certain illegal opcodes.
Fix this by adding default cases for these switch statements that
trigger reserved instruction exception.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-7-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
nanoMIPS ISA does not support unaligned memory access. Adjust
DisasContext's default_tcg_memop_mask to reflect this.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-6-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
If both rs and rt are the same register, the nanoMIPS instruction
BNEC[32] rs, rt, address is equivalent to NOP (branch is not taken and
there is no delay slot). This commit provides such behavior. Without
this commit, this scenario results in an incorrect behavior.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-5-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There are currently two problems related to the emulation of the
instruction BPOSGE32C.
The nanoMIPS instruction BPOSGE32C belongs to DSP R3 instructions
(actually, as of now, it is the only instruction of DSP R3). The
presence of DSP R3 instructions in QEMU is indicated by the flag
MIPS_HFLAG_DSP_R3 (0x20000000). This flag is currently being properly
set in CPUMIPSState's hflags (for example, for I7200 nanoMIPS CPU).
However, it is not propagated to DisasContext's hflags, since the flag
MIPS_HFLAG_DSP_R3 is not set in MIPS_HFLAG_TMASK (while similar flags
MIPS_HFLAG_DSP_R2 and MIPS_HFLAG_DSP are set in this mask, and there
is no problem in functioning check_dsp_r2(), check_dsp()). This means
the function check_dsp_r3() currently does not work properly, and the
emulation of BPOSGE32C can not work properly as well.
Change MIPS_HFLAG_TMASK from 0x1F5807FF to 0x3F5807FF (logical OR
with 0x20000000) to fix this.
Additionally, check_cp1_enabled() is currently incorrectly called
while emulating BPOSGE32C. BPOSGE32C is in the same pool (P.BR1) as
FPU branch instruction BC1EQZC and BC1NEZC, but it not a part of FPU
(CP1) instructions, and check_cp1_enabled() should not be involved
while emulating BPOSGE32C.
Rearrange invocations of check_cp1_enabled() within P.BR1 pool
handling to affect only BC1EQZC and BC1NEZC emulation, and not
BPOSGE32C emulation.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-4-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The field rs in the instruction EXTRV_S.H rt, ac, rs is specified in
nanoMIPS documentation as opcode[20..16]. It is, however, erroneously
considered as opcode[25..21] in the current QEMU implementation. In
function gen_pool32axf_2_nanomips_insn(), the variable v0_t corresponds
to rt/opcode[25..21], and v1_t corresponds to rs/opcode[20..16]), and
v0_t is by mistake passed to the helper gen_helper_extr_s_h().
Use v1_t rather than v0_t in the invocation of gen_helper_extr_s_h()
to fix this.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Fixes: 8b3698b294 ("target/mips: Add emulation of DSP ASE for nanoMIPS")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-3-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The field ac in nanoMIPS instruction MTHLIP rs, ac is specified in
nanoMIPS documentation as opcode[15..14] (2 bits). However, in the
current QEMU code, the corresponding argument passed to the helper
gen_helper_mthlip() has the value of opcode[15..11] (5 bits). Right
shift the value of this argument by three bits to fix this.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504110403.613168-2-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix the FTRUNC_S and FTRUNC_U trans helper problem.
Fixes: 5c5b64000c ("target/mips: Convert MSA 2RF instruction format to decodetree")
Signed-off-by: nihui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503144241.289239-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch fix the issue that helper_msa_st_b() write high 64bit
data to where the low 64bit resides, leaving high 64bit undefined.
Fixes: 68ad9260e0 ("target/mips: Use 8-byte memory ops for msa load/store")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220504023319.12923-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Only for msa COPY_U/COPY_S with wd zero, we treat it as NOP.
Move this special rule into COPY_U and COPY_S trans function.
Fixes: 97fe675519 ("target/mips: Convert MSA COPY_S and INSERT opcodes to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-4-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix issue that condition of check_msa_enabled(ctx) is reversed
that causes segfault when msa elm_fn op encountered.
Fixes: 2f2745c81a ("target/mips: Convert MSA COPY_U opcode to decodetree")
Fixes: 97fe675519 ("target/mips: Convert MSA COPY_S and INSERT opcodes to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-3-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Actually look into dfe structure data so that df_extract_val() and
df_extract_df() can return immediate and datafield other than BYTE.
Fixes: 4701d23aef ("target/mips: Convert MSA BIT instruction format to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-2-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix the SAT_S and SAT_U trans helper confusion.
Fixes: 4701d23aef ("target/mips: Convert MSA BIT instruction format to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220503130708.272850-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
bit 31 (M) of WatchHiN register is a read-only register indicating
whether the next WatchHi register is present. It must not be reset
during user writes to the register.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Reviewed-by: David Daney <david.daney@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Message-Id: <20220511212953.74738-1-philmd@fungible.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The last change to this file has been done in 2012, so it
seems like this is not really used anymore, and the content
is likely very out of date now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412113824.297108-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This bug is probably lurking there for so long, I cannot even git-blame
my way to the commit first introducing it.
Anyway, because n32 is also TARGET_MIPS64, the address space range
cannot be determined by looking at TARGET_MIPS64 alone. Fix this by only
declaring 48-bit address spaces for n64, or the n32 user emulation will
happily hand out memory ranges beyond the 31-bit limit and crash.
Confirmed to make the minimal reproducing example in the linked issue
behave.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/939
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220328035942.3299661-1-xen0n@gentoo.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since the previous commit 9ea89876f9d ("target/mips: Fix cycle
counter timing calculations"), MIPSCPU::cp0_count_rate is not
used anymore. We don't need it since it is already expressed
as mips_def_t::CCRes. Remove the duplicate and clean.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <>20211213102340.1847248-1-f4bug@amsat.org>
The cp0_count_ns value is calculated from the CP0_COUNT_RATE_DEFAULT
constant in target/mips/cpu.c. The cycle counter resolution is defined
per-CPU in target/mips/cpu-defs.c.inc; use this value for calculating
cp0_count_ns. Fixings timing problems on guest OSs for the 20Kc CPU
which has a CCRes of 1.
Signed-off-by: Simon Burge <simonb@NetBSD.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211213135125.18378-1-simonb@NetBSD.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
These target-specific files use the target-specific CPU state
but lack to include "cpu.h"; i.e.:
../target/riscv/pmp.h:61:23: error: unknown type name 'CPURISCVState'
void pmpcfg_csr_write(CPURISCVState *env, uint32_t reg_index,
^
../target/nios2/mmu.h:43:18: error: unknown type name 'CPUNios2State'
void mmu_flip_um(CPUNios2State *env, unsigned int um);
^
../target/microblaze/mmu.h:88:19: error: unknown type name 'CPUMBState'; did you mean 'CPUState'?
uint32_t mmu_read(CPUMBState *env, bool ea, uint32_t rn);
^~~~~~~~~~
CPUState
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-10-f4bug@amsat.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Simplify cpu_loop by doing all of the decode in translate.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Simplify cpu_loop by doing all of the decode in translate.
This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
FCR0_HAS2008 flag has been enabled in commit ba5c79f262
("target-mips: indicate presence of IEEE 754-2008 FPU in
R6/R5+MSA CPUs"), so remove the obsolete FIXME comment.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028212103.2126176-1-f4bug@amsat.org>
When using the Loongson-3A4000 CPU, the MSAIR is returned with a
zero value (because unimplemented). Checking on real hardware,
this value appears incorrect:
$ cat /proc/cpuinfo
system type : generic-loongson-machine
machine : loongson,generic
cpu model : Loongson-3 V0.4 FPU V0.1
model name : Loongson-3A R4 (Loongson-3A4000) @ 1800MHz
isa : mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
ASEs implemented : vz msa loongson-mmi loongson-cam loongson-ext loongson-ext2
...
Checking the CFCMSA opcode result with gdb we get 0x60140:
Breakpoint 1, 0x00000001200037c4 in main ()
1: x/i $pc
=> 0x1200037c4 <main+52>: cfcmsa v0,msa_ir
(gdb) si
0x00000001200037c8 in main ()
(gdb) i r v0
v0: 0x60140
MSAIR bits 17 and 18 are "reserved" per the spec revision 1.12,
so mask them out, and set MSAIR=0x0140 for the Loongson-3A4000
CPU model added in commit af868995e1.
Cc: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211026180920.1085516-1-f4bug@amsat.org>
Only the MSA generic opcode was overlapping with the other
instructions. Since the previous commit removed it, we can
now remove the overlap group. The decodetree script forces
us to re-indent the opcodes.
Diff trivial to review using `git-diff --ignore-all-space`.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-32-f4bug@amsat.org>
All opcodes have been converted to decodetree. The generic
MSA handler is now pointless, remove it.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-31-f4bug@amsat.org>
Convert the CTCMSA (Copy To Control MSA register) opcode
to decodetree. Since it overlaps with the SLDI opcode,
use a decodetree overlap group.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-30-f4bug@amsat.org>
Convert the CFCMSA (Copy From Control MSA register) opcode
to decodetree. Since it overlaps with the SPLATI opcode,
use a decodetree overlap group.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-29-f4bug@amsat.org>
Convert the MOVE.V opcode (Vector Move) to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-28-f4bug@amsat.org>
Convert the COPY_S (Element Copy to GPR Signed) opcode
and INSERT (GPR Insert Element) opcode to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-27-f4bug@amsat.org>
Convert the COPY_U opcode (Element Copy to GPR Unsigned) to
decodetree.
Since the 'n' field is a constant value, use tcg_constant_i32()
instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-26-f4bug@amsat.org>
Convert instructions with an immediate element index
and data format df/n to decodetree.
Since the 'data format' and 'n' fields are constant values,
use tcg_constant_i32() instead of a TCG temporaries.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-25-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-24-f4bug@amsat.org>
Convert BINSL (Vector Bit Insert Left) and BINSR (Vector Bit
Insert Right) opcodes to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-23-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Per the Encoding of Operation Field for 3R Instruction Format'
(Table 3.25), these instructions are not defined for the BYTE
format. Therefore the TRANS_DF_iii_b() macro returns 'false'
in that case, because no such instruction is decoded.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-22-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Note, the format definition could be named @3rf_b (for
3R with a df field BYTE-based) but since the instruction
class is named '3R', we simply call the format @3r to
ease reviewing the msa.decode file.
However we directly call the trans_msa_3rf() function,
which handles the BYTE-based df field.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-21-f4bug@amsat.org>
Convert 3-register floating-point or fixed-point operations
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-20-f4bug@amsat.org>
Convert 3-register floating-point or fixed-point operations
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-19-f4bug@amsat.org>
Convert 3-register instructions with implicit data formats
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-18-f4bug@amsat.org>
Convert 2-register operations to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-17-f4bug@amsat.org>
Convert the FILL opcode (Vector Fill from GPR) to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-16-f4bug@amsat.org>
Convert 2-register floating-point operations to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-15-f4bug@amsat.org>
Convert load/store instructions to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-14-f4bug@amsat.org>
Convert instructions with an 8-bit immediate value and either
implicit data format or data format df to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-13-f4bug@amsat.org>
Convert the SHF opcode (Immediate Set Shuffle Elements) to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-12-f4bug@amsat.org>
Convert instructions with an immediate bit index and
data format df/m to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-11-f4bug@amsat.org>
Convert instructions with a 5-bit immediate value to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-10-f4bug@amsat.org>
Convert the LDI opcode (Immediate Load) to decodetree. Since it
overlaps with the generic MSA handler, use a decodetree overlap
group.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-9-f4bug@amsat.org>
This 'shift amount' format is not always 16-bit, so name it
generically as 'sa'. This will help to unify the various
arg_msa decodetree generated structures.
Rename the @bz format -> @bz_v (specific @bz with df=3) and
@bz_df -> @bz (generic @bz).
Since we modify &msa_bz, re-align its arguments, so the other
structures added in the following commits stay visually aligned.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-8-f4bug@amsat.org>
Replace magic DataFormat value by the corresponding
enum from CPUMIPSMSADataFormat.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-7-f4bug@amsat.org>
Have check_msa_access() return a boolean value so we can
return early if MSA is not enabled (the instruction got
decoded properly, but we raised an exception).
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-6-f4bug@amsat.org>
The dup_const() helper makes the code easier to follow, use it.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-5-f4bug@amsat.org>
While the first 'off' variable assignment is unused, it helps
to better understand the code logic. Move the assignation where
it would have been used so it is easier to compare the MSA
registers based on FPU ones versus the MSA specific registers.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211023214803.522078-34-f4bug@amsat.org>
The result of the 'Vector Multiply and Subtract' opcode is
incorrect with Byte vectors. Probably due to a copy/paste error,
commit 5f148a0232 mistakenly used the $wt (target register)
instead of $wd (destination register) as first operand. Fix that.
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Fixes: 5f148a0232 ("target/mips: msa: Split helpers for MSUBV.<B|H|W|D>")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-3-f4bug@amsat.org>
The result of the 'Vector Multiply and Add' opcode is incorrect
with Byte vectors. Probably due to a copy/paste error, commit
7a7a162add mistakenly used the $wt (target register) instead
of $wd (destination register) as first operand. Fix that.
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Fixes: 7a7a162add ("target/mips: msa: Split helpers for MADDV.<B|H|W|D>")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-2-f4bug@amsat.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for mips linux-user.
This means we can remove tcg/user/tlb_helper.c entirely.
Remove the code from cpu_loop that raised SIGSEGV.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since gen_mipsdsp_accinsn() got added in commit b53371ed5d
("target-mips: Add ASE DSP accumulator instructions"), the
'v2_t' TCG temporary has never been used. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211014224551.2204949-1-f4bug@amsat.org>
While for the DEXTR_S.H opcode:
"The shift argument is provided in the instruction."
For the DEXTRV_S.H opcode we have:
"The five least-significant bits of register rs provide the
shift argument, interpreted as a five-bit unsigned integer;
the remaining bits in rs are ignored."
While 't1' contains the 'rs' register content (the shift value
for DEXTR_S.H), we need to load the value of 'rs' for DEXTRV_S.H.
We can directly use the v1_t TCG register which already contains
this shift value.
Fixes: b53371ed5d ("target-mips: Add ASE DSP accumulator instructions")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211013215652.1764551-1-f4bug@amsat.org>
The offset is constant and read-only: move it to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-9-f4bug@amsat.org>
We already use sextract32(), use extract32() for completeness
instead of open-coding it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-7-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-6-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-5-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-4-f4bug@amsat.org>
Data Format is a 2-bit constant value.
Avoid using a TCG temporary by moving it to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-3-f4bug@amsat.org>
Commits cbe50b9a8e ("target-mips: add MSA VEC/2R format instructions")
and 3bdeb68866 ("target-mips: add MSA 2RF format instructions") added
the MSA 2R/2RF instructions. However these instructions don't use any
target vector register, so remove the unused TCG temporaries.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003175743.3738710-2-f4bug@amsat.org>
Per the "MIPS Architecture Extension: nanoMIPS32 DSP TRM" rev 0.04,
MULT and MULTU opcodes:
The value of ac selects an accumulator numbered from 0 to 3.
When ac=0, this refers to the original HI/LO register pair of the
MIPS32 architecture.
In Release 6 of the MIPS Architecture, accumulators are eliminated
from MIPS32.
Ensure pre-Release 6 is restricted to HI/LO registers pair.
Fixes: 8b3698b294 ("target/mips: Add emulation of DSP ASE for nanoMIPS - part 4")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As per an ancient comment in mips_tr_translate_insn about the
expectations of gdb, when restarting the insn in a delay slot
we also re-execute the branch. Which means that we are
expected to execute two insns in this case.
This has been broken since 8b86d6d258, where we forced max_insns
to 1 while single-stepping. This resulted in an exit from the
translator loop after the branch but before the delay slot is
translated.
Increase the max_insns to 2 for this case. In addition, bypass
the end-of-page check, for when the branch itself ends the page.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than use 4-16 separate operations, use 2 operations
plus some byte reordering as necessary.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should not have been using the helper_ret_* set of
functions, as they are supposed to be private to tcg.
Nor should we have been using the plain cpu_*_data set
of functions, as they do not handle unwinding properly.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
