Older versions (anything but the latest) of Linux usbfs + libusb(x),
will submit larger (bulk) transfers split into multiple 16k submissions,
which means that rather then all tds getting linked into the queue in
one atomic operarion they get linked in a bunch at a time, which could
cause problems if:
1) We scan the queue while libusb is in the middle of submitting a split
bulk transfer
2) While this bulk transfer is pending we migrate to another host.
The problem is that after 2, the new host will rescan the queue and
combine the packets in one large transfer, where as 1) has caused the
original host to see them as 2 transfers. This patch fixes this by stopping
combinging if we detect a 16k transfer with its int_req flag set.
This should not adversely effect performance for other cases as:
1) Linux never sets the interrupt flag on packets other then the last
2) Windows does set the in_req flag on each td, but will submit large
transfers in 20k tds thus never triggering the check
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently we only do pipelining for output endpoints, since to properly
support short-not-ok semantics we can only have one outstanding input
packet. Since the ehci and uhci controllers have a limited per td packet
size guests will split large input transfers to into multiple packets,
and since we don't pipeline these, this comes with a serious performance
penalty.
This patch adds helper functions to (re-)combine packets which belong to 1
transfer at the guest device-driver level into 1 large transger. This can be
used by (redirection) usb-devices to enable pipelining for input endpoints.
This patch will combine packets together until a transfer terminating packet
is encountered. A terminating packet is a packet which meets one or more of
the following conditions:
1) The packet size is *not* a multiple of the endpoint max packet size
2) The packet does *not* have its short-not-ok flag set
3) The packet has its interrupt-on-complete flag set
The short-not-ok flag of the combined packet is that of the terminating packet.
Multiple combined packets may be submitted to the device, if the combined
packets do not have their short-not-ok flag set, enabling true pipelining.
If a combined packet does have its short-not-ok flag set the queue will
wait with submitting further packets to the device until that packet has
completed.
Once enabled in the usb-redir and ehci code, this improves the speed (MB/s)
of a Linux guest reading from a USB mass storage device by a factor of
1.2 - 1.5.
And the main reason why I started working on this, when reading from a pl2303
USB<->serial converter, it combines the previous 4 packets submitted per
device-driver level read into 1 big read, reducing the number of packets / sec
by a factor 4, and it allows to have multiple reads outstanding. This allows
for much better latency tolerance without the pl2303's internal buffer
overflowing (which was happening at 115200 bps, without serial flow control).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
My recent uhci cleanup series has introduced a regression, where
qemu sometimes crashes on a device disconnect. The problem is that
the uhci code never checked for a device not / no longer existing, instead
it was relying on usb_handle_packet accepting a NULL device.
But since we now pass usb_handle_packet q->ep->dev, rather then just
a local dev variable, we crash as q->ep == NULL due to the device no longer
existing.
This patch fixes this. Note that this patch also improves over
the old behavior were we would:
1) create a queue for the device
2) create an async for the packet
3) have usb_handle_packet fail
4) destroy the async
5) wait for the queue to be idle for 32 frames
6) destroy the queue
Which was rather sub-optimal.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Kills the ugly "switch (device_id) { ... }" struct and makes it easier
to figure what the differences between the uhci variants are.
Need our own DeviceClass struct for that so we can allocate some space
to store UHCIInfo.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Guard against re-definition of EHCI_DEBUG. Allows for turning on of debug info
from configure (using --qemu-extra-cflags="-DEHCI_DEBUG=1") rather than source
code hacking.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Seperate the PCI stuff from the EHCI components. Extracted the PCIDevice
out into a new wrapper struct to make EHCIState non-PCI-specific. Seperated
tho non PCI init component out into a seperate "common" init function.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pull the DMAContext for the PCI DMA out at device init time and put it into
the device state. Use dma_memory_read/write() instead of pci specific versions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The capabilities register and operational register offsets can vary from one
EHCI implementation to the next. Parameterise accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Factor out the code which checks whenever a usb device is attached
to the port in question. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rename the function for xhci_port_* naming scheme, also drop
the xhci parameter as port carries a pointer to xhci anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add {get,set}_field macros (simliar to ehci) to read and update
some bits of a word. Put them into use for updating pls (port
link state) values. Also add a enum for pls values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With both text (curses) and graphics (vnc/sdl/spice/...) display active
vga text mode emulation fails to update both correctly. Depending on
whenever vga_update_text() or vga_draw_text() happens to be called first
only the text display or only the graphics display will see display
resolution changes and full redraws.
Fix it by calling both text/gfx resize functions in both code paths and
keep track of full screen redraws needed in VGACommonState fields.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stop abusing displaysurface fields for text mode displays.
(bpp = 0, width = cols, height = lines).
Add flags to displaystate indicating whenever text mode display
(curses) or gfx mode displays (sdl, vnc, ...) are present.
Add separate displaychangelistener callbacks for text / gfx mode
resize & updates.
This allows to enable gfx and txt diplays at the same time and also
paves the way for more cleanups in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When adding DisplayChangeListeners the set_mouse and cursor_define
callbacks have been left in DisplayState for some reason. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A couple of places in xics.c open-coded the same logic as is already
implemented in ics_valid_irq(). This patch fixes the code duplication.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Throughout xics.c 'nr' is used to refer to a global interrupt number, and
'server' is used to refer to an interrupt server number (i.e. CPU number).
Except in icp_set_mfrr(), where 'nr' is used as a server number. Fix this
confusing inconsistency.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This reverts commit a178274efa.
Contrary to that commit's message, the users of old_portio are not all
gone. In particular VGA still uses it via portio_list_add().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some guest operating systems' drivers (Mac OS X in particular) fail to
properly initialize the Receive Address registers (probably expecting
them to be pre-initialized by an earlier component, such as a specific
proprietary BIOS). This patch pre-initializes the RA registers, allowing
OS X networking to function properly. Other guest operating systems are
not affected, and free to (re)initialize these registers during boot.
[According to the datasheet the Address Valid bits in the RA registers
are cleared on PCI or software reset. This patch adds the NIC's MAC
address and sets Address Valid on reset. So we diverge from real
hardware behavior here. -- Stefan]
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Real HW always treats RX ring with RDH == RDT as empty.
Emulation is supposed to behave the same.
Reported-by: Chris Webb <chris.webb@elastichosts.com>
Reported-by: Richard Davies <richard.davies@elastichosts.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For target-mips also change the return type to bool.
Make include paths for cpu-qom.h consistent for alpha and unicore32.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[AF: Updated new target-openrisc function accordingly]
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
Allow RAM size to be configurable for cirrus, to allow migration
compatibility from qemu-kvm.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Adapt emulate_spapr_hypercall() accordingly.
Needed for changing spapr_hypercall() argument type to PowerPCCPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Needed for changing cpu_has_work() argument type to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Needed for changing qemu_cpu_kick() argument type to CPUState and
for moving halted field into CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change return type to bool, move to include/qemu/cpu.h and
add documentation.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[AF: Updated new caller qemu_in_vcpu_thread()]
Simplifies the call in apic_sipi() again and needed for moving halted
field to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Prepares for using a link<> property to connect APIC with CPU and for
changing the CPU APIs to CPUState.
Resolve Coding Style warnings by moving the closing parenthesis of
foreach_apic() macro to next line.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This prepares for changing the variable type from void*.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
(L)APIC is a part of cpu [1] so move APIC initialization inside of
x86_cpu object. Since cpu_model and override flags currently specify
whether APIC should be created or not, APIC creation&initialization is
moved into x86_cpu_apic_init() which is called from x86_cpu_realize().
[1] - all x86 cpus have integrated APIC if we overlook existence of i486,
and it's more convenient to model after majority of them.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* 'qspi.2' of git://developer.petalogix.com/public/qemu:
xilinx_zynq: added QSPI controller
xilinx_spips: Generalised to model QSPI
m25p80: Support for Quad SPI
Start introducing AioContext, which will let us remove globals from
aio.c/async.c, and introduce multiple I/O threads.
The bottom half functions now take an additional AioContext argument.
A bottom half is created with a specific AioContext that remains the
same throughout the lifetime. qemu_bh_new is just a wrapper that
uses a global context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch updates SD card model to support save/load of card's state.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Standard capacity cards SDSC use byte unit address while SDHC and SDXC cards use
block unit address (512 bytes) when setting ERASE_START and ERASE_END with CMD32
and CMD33, we have to account for this.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This DPRINTF was throwing a warning due to a missing cast.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOMified the pflash_cfi0x so machine models can connect them up in custom ways.
Kept the pflash_cfi0x_register functions as is. They can still be used to
create a flash straight onto system memory.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This field is completely unused.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This field is completely unused. The base address should also be abstracted
away from the device anyway. Removed.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use LOG_GUEST_ERROR to report guest accesses to bad register
offsets, and LOG_UNIMP for access to the unimplemented
test registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't explode QEMUMachineInitArgs in every realview init
function; just pass it to the common realview_init() code
instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement byte/halfword read and write for the NVIC SCB_SHPRx
(System Handler Priority Registers). Do this by removing SHPR word access
from nvic_readl/writel and adding common code to hande all access
sizes in nvic_sysreg_read/write.
Because the "nvic_state *s" variable now needs to be declared in
nvic_sysreg_read/write, the "void *opaque" parameter of
nvic_readl/writel is changed to "nvic_state *s".
Signed-off-by: Andre Beckus <mikemail98-qemu@yahoo.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* 's390-for-upstream' of git://repo.or.cz/qemu/agraf:
s390: sclp ascii console support
s390: sclp signal quiesce support
s390: sclp event support
s390: sclp base support
s390: use sync regs for register transfer
s390/kvm_stat: correct sys_perf_event_open syscall number
s390x: fix -initrd in virtio machine
This includes infrastructure patches that don't do much by themselves
but should help vfio and q35 make progress.
Also included is rework of virtio-net to use iovec APIs
for vector access - helpful to make it more secure
and in preparation for a new feature that will allow
arbitrary s/g layout for guests.
Also included is a pci bridge bugfix by Avi.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJQjrGtAAoJECgfDbjSjVRpoRUH/iW2wYfnPtgjIF2gSBmdlmLK
m5uLSuayHdiNXfjXeNJRySQDu4HZU3K9fDnU+HIMUUmvx/jgaMIbSQZ1gayqQhf8
T1WH21wkkSTEnW0y9t+C3NtRzdK6AbQ1Jy/TqgP++tjT0w54QkoGKEnX3mvvNoDv
xdT+dYcpzMFLZ2KaimP73EwILMMR45iRTPhrjSN2wlwCPPnNcg1Jt0Atb6pYveja
1/46ZY+VxNgRtVSNhnV8xeyyJgwPOrUReKlrqD67YQAeMbzqrel9XDBJuZ3kScWt
vv2AQ0Fe8GMkMkbNaQ0mFh6pXQ2arTAYb8sb6PColCLOn5yNqFz95YGebG36gxk=
=HP23
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,pci infrastructure
This includes infrastructure patches that don't do much by themselves
but should help vfio and q35 make progress.
Also included is rework of virtio-net to use iovec APIs
for vector access - helpful to make it more secure
and in preparation for a new feature that will allow
arbitrary s/g layout for guests.
Also included is a pci bridge bugfix by Avi.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* mst/tags/for_anthony: (25 commits)
pci: avoid destroying bridge address space windows in a transaction
virtio-net: enable mrg buf header in tap on linux
virtio-net: test peer header support at init time
virtio-net: minor code simplification
virtio-net: simplify rx code
virtio-net: switch tx to safe iov functions
virtio-net: first s/g is always at start of buf
virtio-net: refactor receive_hdr
virtio-net: use safe iov operations for rx
virtio-net: avoid sg copy
iov: add iov_cpy
virtio-net: track host/guest header length
pcie: Convert PCIExpressHost to use the QOM.
pcie: pass pcie window size to pcie_host_mmcfg_update()
pci: Add class 0xc05 as 'SMBus'
pci: introduce pci_swizzle_map_irq_fn() for standardized interrupt pin swizzle
pci_ids: add intel 82801BA pci-to-pci bridge id
pci: pci capability must be in PCI space
pci: make each capability DWORD aligned
qemu: enable PV EOI for qemu 1.3
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This code adds console support by implementing SCLP's ASCII Console
Data event. This is the same console as LPARs ASCII console or z/VMs
sysascii.
The console can be specified manually with something like
-chardev stdio,id=charconsole0 -device sclpconsole,chardev=charconsole0,id=console0
Newer kernels will autodetect that console and prefer that over virtio
console.
When data is received from the character layer it creates a service
interrupt to trigger a Read Event Data command from the guest that will
pick up the received character byte-stream.
When characters are echo'ed by the linux guest a Write Event Data occurs
which is forwarded by the Event Facility to the console that supports
a corresponding mask value.
Console resizing is not supported.
The character layer byte-stream is buffered using a fixed size iov
buffer.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This implements the sclp signal quiesce event via the SCLP Event
Facility.
This allows to gracefully shutdown a guest by using system_powerdown
notifiers. It creates a service interrupt that will trigger a
Read Event Data command from the guest. This code will then add an
event that is interpreted by linux guests as ctrl-alt-del.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Several SCLP features are considered to be events. Those events don't
provide SCLP commands on their own, instead they are all based on
Read Event Data, Write Event Data, Write Event Mask and the service
interrupt. Follow-on patches will provide SCLP's Signal Quiesce (via
system_powerdown) and the ASCII console.
Further down the road the sclp line mode console and configuration
change events (e.g. cpu hotplug) can be implemented.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a more generic infrastructure for handling Service-Call
requests on s390. Currently we only support a small subset of Read
SCP Info directly in target-s390x. This patch provides the base
infrastructure for supporting more commands and moves Read SCP
Info.
In the future we could add additional commands for hotplug, call
home and event handling.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
When using -initrd in the virtio machine, we need to indicate the initrd
start and size inside the kernel image. These parameters need to be stored
in native endianness.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Calling memory_region_destroy() in a transaction is illegal (and aborts),
as until the transaction is committed, the region remains live.
Fix by moving destruction until after the transaction commits. This requires
having an extra set of regions, so the new and old regions can coexist.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Modern linux supports arbitrary header size,
which makes it possible to pass mrg buf header
to tap directly without iovec mangling.
Use this capability when it is there.
This removes the need to deal with it in
vhost-net as we do now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There's no reason to query header support at random
times: at load or feature query.
Driver also might not query functions.
Cleaner to do it at device init.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove code duplication using guest header length that we track.
Drop specific layout requirement for rx buffers: things work
using generic iovec functions in any case.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we know host hdr length, we don't need to
duplicate the logic in receive_hdr: caller can
figure out the offset itself.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid magling iov manually: use safe iov operations
for processing packets incoming to guest.
This also removes the requirement for virtio header to
fit the first s/g entry exactly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid tweaking iovec during receive. This removes
the need to copy the vector.
Note: we currently have an evil cast in work_around_broken_dhclient
and unfortunately this patch does not fix it - just
pushes the evil cast to another place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Calling memory_region_destroy() in a transaction is illegal (and aborts),
as until the transaction is committed, the region remains live.
Fix by moving destruction until after the transaction commits. This requires
having an extra set of regions, so the new and old regions can coexist.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Let's use PCIExpressHost with QOM.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows q35 to pass/set the size of the pcie window in its update routine.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[jbaron@redhat.com: add PCI_CLASS_SERIAL_SMBUS definition]
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce pci_swizzle_map_irq_fn() for interrupt pin swizzle which is
standardized. PCI bridge swizzle is common logic, by introducing
this function duplicated swizzle logic will be avoided later.
[jbaron@redhat.com: drop opaque argument]
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adds pci id constants which will be used by q35.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci capability must be in PCI space.
It can't lay in PCIe extended config space.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI spec (see e.g. 6.7 Capabilities List in spec rev 3.0)
requires that each capability is DWORD aligned.
Ensure this when allocating space by rounding size up to 4.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable KVM PV EOI by default. You can still disable it with
-kvm_pv_eoi cpu flag. To avoid breaking cross-version migration,
enable only for qemu 1.3 (or in the future, newer) machine type.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than assert, simply return PCI_INTX_DISABLED when we don't
have a pci_route_irq_fn. PIIX already returns DISABLED for an
invalid pin, so users already deal with this state. Users of this
interface should only be acting on an ENABLED or INVERTED return
value (though we really have no support for INVERTED). Also
complain loudly when we hit this so we don't forget it's missing.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
pci-assign only uses a subset of the flexibility msi_get_message()
provides, but it's still worthwhile to use it.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vfio-pci and pci-assign both do this on their own for setting up
direct MSI injection through KVM. Provide a helper function for
this in MSI code.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* kraxel/usb.68: (36 commits)
xhci: fix usb name in caps
xhci: make number of interrupters and slots configurable
xhci: allow disabling interrupters
xhci: flush endpoint context unconditinally
xhci: fix function name in error message
uhci: Use only one queue for ctrl endpoints
uhci: Retry to fill the queue while waiting for td completion
uhci: Always mark a queue valid when we encounter it
uhci: When the guest marks a pending td non-active, cancel the queue
uhci: Detect guest td re-use
uhci: Verify queue has not been changed by guest
uhci: Immediately free queues on device disconnect
uhci: Store ep in UHCIQueue
uhci: Make uhci_fill_queue() actually operate on an UHCIQueue
uhci: Add uhci_read_td() helper function
uhci: Rename UHCIAsync->td to UHCIAsync->td_addr
uhci: Move emptying of the queue's asyncs' queue to uhci_queue_free
uhci: Drop unnecessary forward declaration of some static functions
uhci: Don't retry on error
uhci: cleanup: Add an unlink call to uhci_async_cancel()
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On PPC, we don't have PIO. So usually PIO space behind a PCI bridge is
accessible via MMIO. Do this mapping explicitly by mapping the PIO space
of our PCI bus into a memory region that lives in memory space.
Signed-off-by: Alexander Graf <agraf@suse.de>
At present, using 'system_powerdown' from the monitor or otherwise
instructing qemu to (cleanly) shut down a pseries guest will not work,
because we did not have a method of signalling the shutdown request to the
guest.
PAPR does include a usable mechanism for this, though it is rather more
involved than the equivalent on x86. This involves sending an EPOW
(Environmental and POwer Warning) event through the PAPR event and error
logging mechanism, which also has a number of other functions.
This patch implements just enough of the event/error logging functionality
to be able to send a shutdown event to the guest. At least with modern
guest kernels and a userspace that is up and running, this means that
system_powerdown from the qemu monitor should now work correctly on pseries
guests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the pseries machine code allows a callback to be registered
for a hypercall number twice, as long as it's the same callback the second
time. We don't test for duplicate registrations of RTAS callbacks at all
so it will effectively be last registratiojn wins.
This was originally done because it was awkward to ensure that the
registration happened exactly once, but the code has since been
restructured so that's no longer the case.
Duplicate registration of a hypercall or RTAS call could well suggest
a duplicate initialization which could cause other problems, so this patch
makes duplicate registrations a bug, to prevent the old behaviour from
hiding other bugs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
When -usb option is used, global varible usb_enabled is set.
And all the plaform will create one USB controller according
to this variable. In fact, global varibles make code hard
to read.
So this patch is to remove global variable usb_enabled and
add USB option in machine options. All the plaforms will get
USB option value from machine options.
USB option of machine options will be set either by:
* -usb
* -machine type=pseries,usb=on
Both these ways can work now. They both set USB option in
machine options. In the future, the first way will be removed.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
it was wrongly using serial_hds[0] instead of serial_hds[1]
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Device tree properties need to be specified in big endian. Fix the
bamboo memory size property accordingly.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: qemu-stable@nongnu.org
Added the QSPI controller to the Zynq. 4 SPI devices are attached to allow
modelling of the different geometries. E.G. Dual parallel and dual stacked
mode can both be tested with this one arrangement.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Extended the xilinx spips controller to model QSPI as well. Paremeterised the
operational difference with the normal spi controller (num_ss_bits, width of the
tx/rx fifo heads etc.). Multiple bus functionality is modelled (needed for QSPI
dual parallel mode. LQSPI is modelled.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Added the Quad mode read and write commands. Data remains serialized on a
single wire, i.e. the quad mode instructions just behave the same as single
mode, with the expection of modelling the varying number of dummy/mode bytes
between the address bytes and the first data word.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Remove xtensa_sim_init that only explodes machine init args, rename
sim_init to xtensa_sim_init.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't explode QEMUMachineInitArgs before passing it to lx_init.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
For secondary interrupters this is explicitly allowed in the specs.
For the primary interrupter behavior is undefined, lets be friendly
and allow disabling too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Not updating the endpoint context in case the state didn't change is
wrong. Other context fields might have changed, for example the
dequeue pointer in response to a CR_SET_TR_DEQUEUE command.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ctrl endpoints use different pids for different phases of a control
transfer, this patch makes us use only one queue for a ctrl ep, rather
then 3.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the guest is using multiple transfers to try and keep the usb bus busy /
used at maximum efficiency, currently we would see / do the following:
1) submit transfer 1 to the device
2) submit transfer 2 to the device
3) report transfer 1 completion to guest
4) report transfer 2 completion to guest
5) submit transfer 1 to the device
6) report transfer 1 completion to guest
7) submit transfer 2 to the device
8) report transfer 2 completion to guest
etc.
So after the initial submission we would effectively only have 1 transfer
in flight, rather then 2. This is caused by us not checking the queue for
addition of new transfers by the guest (ie the resubmission of a recently
finished transfer), while waiting for a pending transfer to complete.
This patch does add a check for this, changing the sequence to:
1) submit transfer 1 to the device
2) submit transfer 2 to the device
3) report transfer 1 completion to guest
4) submit transfer 1 to the device
5) report transfer 2 completion to guest
6) submit transfer 2 to the device
etc.
Thus keeping 2 transfers in flight (most of the time, and always 1),
as intended by the guest.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before this patch we would not mark a queue valid when its head was a
non-active td. This causes us to misbehave in the following scenario:
1) queue with multiple input transfers queued
2) We hit some latency issue, causing qemu to get behind processing frames
3) When qemu gets to run again, it notices the first transfer ends short,
marking the head td non-active
4) It now processes 32+ frames in a row without giving the guest a chance
to run since it is behind
5) valid is decreased to 0, causing the queue to get cancelled also cancelling
already queued up further input transfers
6) guest gets to run, notices the inactive td, cleanups up further tds
from the short transfer, and lets the queue continue at the first td of
the next input transfer
7) we re-start the queue, issuing the second input transfer for the *second*
time, and any data read by the first time we issued it has been lost
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A td can be reused by the guest in a different queue, before we notice
the original queue has been unlinked. So search for tds by addr only, detect
guest td reuse, and cancel the original queue, this is necessary to keep our
packet ids unique.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the spec a guest can unlink a qh, and then as soon as frindex
has changed by 1 since the unlink, assume it is idle and re-use it. However
for various reasons, we cannot simply consider a qh as unlinked if we've not
seen it for 1 frame. This means that it is possible for a guest to re-use /
restart the queue while we still see its old state. This patch adds a safety
check for this, and "early" retires queues when they were changed by the guest.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no need to just cancel any in-flight packets, and then wait
for validate-end to clean things up, we can simply clean things up
immediately on device removal.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This avoids the need to repeatedly lookup the device, and ep.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
And move its calling point to handle_td, this removes the ep_ret ugliness,
and prepates the way for further cleanups in the follow-up patches in this
patch-set.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We use the name td both to refer to a UHCI_TD read from guest memory as
well as to refer to the guest address where a td is stored, switch over
to always use td_addr in the second case for consistency.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cleanup: all callers of uhci_queue_free first unconditionally cancel
all remaining asyncs in the queue, so lets move this to uhci_queue_free().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since we are either dealing with emulated devices, where retrying is
not going to help, or with redirected devices where the host OS will
have already retried, don't bother retrying on failed transfers.
Also move some common/indentical code out of all the error cases
into the generic error path.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All callers of uhci_async_cancel() call uhci_async_unlink() first, so
lets move the unlink call to uhci_async_cancel()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
No devices ever return async for isoc endpoints and the core
already enforces this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ehci was already testing for this, and we depend in various places
on no devices doing this, so lets move the check for this to the
usb core.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
After a short-not-ok packet ending short, we should not advance the queue.
Move enforcing this to the core, rather then handling it in the hcd code.
This may result in the queue now actually containing multiple input packets
(which would not happen before), and this requires special handling in
combination with pipelining, so disable pipleining for input endpoints
(for now).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
hcds which queue up more then one packet at once (uhci, ehci and xhci),
must clear the queue after an error which has caused the queue to halt.
Currently this is handled as a special case inside the hcd code, this
patch instead adds an USB_RET_REMOVE_FROM_QUEUE packet result code, teaches
the 3 hcds about this and moves the clearing of the queue on a halt into
the USB core.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This can be used by usb-device code which wishes to process an entire endpoint
queue at once, to do this the usb-device code returns USB_RET_ADD_TO_QUEUE
from its handle_data class method and defines a flush_ep_queue class method
to call when the hcd is done queuing up packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the guest is using multiple transfers to try and keep the usb bus busy /
used at maximum efficiency, currently we would see / do the following:
1) submit transfer 1 to the device
2) submit transfer 2 to the device
3) report transfer 1 completion to guest
4) report transfer 2 completion to guest
5) submit transfer 1 to the device
6) report transfer 1 completion to guest
7) submit transfer 2 to the device
8) report transfer 2 completion to guest
etc.
So after the initial submission we would effectively only have 1 transfer
in flight, rather then 2. This is caused by us not checking the queue for
addition of new transfers by the guest (ie the resubmission of a recently
finished transfer), while waiting for a pending transfer to complete.
This patch does add a check for this, changing the sequence to:
1) submit transfer 1 to the device
2) submit transfer 2 to the device
3) report transfer 1 completion to guest
4) submit transfer 1 to the device
5) report transfer 2 completion to guest
6) submit transfer 2 to the device
etc.
Thus keeping 2 transfers in flight (most of the time, and always 1),
as intended by the guest.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For ctrl endpoints Windows (atleast Win7) creates circular td lists, so far
these were not a problem because we would stop filling the queue if altnext
was set. Since further patches in this patchset remove the altnext check this
does become a problem and we need detection for going in circles.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Often the guest will queue up new packets in response to a packet, in the
async schedule with its IOC flag set, completing. By speeding up the
frame-timer, we notice these new packets earlier. This increases the
speed (MB/s) of a Linux guest reading from a USB mass storage device by a
factor of 1.15 on top of the "Improve latency of interrupt delivery"
speed-ups, both with and without input pipelining enabled.
I've not tested the speed-up of this patch without the
"Improve latency of interrupt delivery" patch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While doing various performance tests of reading from USB mass storage devices
I noticed the following::
1) When an async handled packet completes, we don't immediately report an
interrupt to the guest, instead we wait for the frame-timer to run and
report it from there
2) If 1) has been fixed and an async handled packet takes a while to complete,
then async_stepdown will become a high value, which means that there
will be a large latency before any new packets queued by the guest in
response to the interrupt get seen
1) was done deliberately as part of commit f0ad01f92:
http://www.kraxel.org/cgit/qemu/commit/?h=usb.57&id=f0ad01f92ca02eee7cadbfd225c5de753ebd5fce
Since setting the interrupt immediately on async packet completion was causing
issues with Linux guests, I believe this recently fixed Linux bug explains
why this is happening:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=361aabf395e4a23cf554cf4ec0c0c6963b8beb01
Note that we can *not* count on this fix being present in all Linux guests!
I was hoping that the recently added support for Interrupt Threshold Control
would fix the issues with Linux guests, but adding a simple ehci_commit_irq()
call to ehci_async_bh() still caused problems with Linux guests.
The problem is, that when doing ehci_commit_irq() from ehci_async_bh(),
the "old" frindex value is used to calculate usbsts_frindex, and when
the frame-timer then runs possibly very shortly after ehci_async_bh(),
it increases the frame-timer, and thus any interrupts raised from that
frame-timer run, will also get reported to the guest immediately, rather
then being delayed to the next frame-timer run.
Luckily the solution for this is simple, this means that we need to
increase frindex before calling ehci_commit_irq() from ehci_async_bh(),
which in the end boils down to simple calling ehci_frame_timer() instead
of ehci_async_bh() from the bh.
This may seem like it causes a lot of extra work to be done, but this
is not true. Any work done from the frame-timer processing the periodic
schedule is work which then does not need to be done the next time the
frame timer runs, also the frame-timer will re-arm itself at (possibly)
a later time then it was armed for saving a vmexit at that time.
As an additional advantage moving to simply calling the frame-timer also
fixes 2) as the packet completion will set async_stepdown to 0, and the
re-arming of the timer with an async_stepdown of 0 ensures that any
newly queued up packets get seen in a reasonable amount of time.
This improves the speed (MB/s) of a Linux guest reading from a USB mass
storage device by a factor of 1.5 - 1.7 with input pipelining disabled,
and by a factor of 1.8 with input pipelining enabled.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to 4.15.1.2 an interrupt must be raised when a short packet
is received. If we don't do this it may take a significant time for
the guest to notice a short trasnfer has completed, since only the last td
will have its IOC flag set, and a short transfer may complete in an earlier
packet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This field is used in some places to track the tbytes field of the token, but
in other places the field is used directly, use it directly everywhere for
consistency.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rather then having a special check to start queuing after the first packet,
and then another check for the other packets in uhci_fill_queue(), simply
check the previous packet beforehand in uhci_fill_queue()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Packets with an invalid pid, or which were cancelled have
usb_packet_map() called on them on init, but not usb_packet_unmap()
before being freed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-kvm/memory/urgent:
memory: abort if a memory region is destroyed during a transaction
i440fx: avoid destroying memory regions within a transaction
memory: Make eventfd adhere to device endianness
Add multiport serial card implementation, with two variants, one
featuring two and one featuring four ports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Split serial.c into serial.c, serial.h and serial-isa.c. While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h. The latter leads to s/pc.h/serial.h/ in tons of
boards which just want the serial bits from pc.h
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* quintela/migration-next-20121017: (41 commits)
cpus: create qemu_in_vcpu_thread()
savevm: make qemu_file_put_notify() return errors
savevm: un-export qemu_file_set_error()
block-migration: handle errors with the return codes correctly
block-migration: Switch meaning of return value
block-migration: make flush_blks() return errors
buffered_file: buffered_put_buffer() don't need to set last_error
savevm: Only qemu_fflush() can generate errors
savevm: make qemu_fill_buffer() be consistent
savevm: unexport qemu_ftell()
savevm: unfold qemu_fclose_internal()
savevm: make qemu_fflush() return an error code
savevm: Remove qemu_fseek()
virtio-net: use qemu_get_buffer() in a temp buffer
savevm: unexport qemu_fflush
migration: make migrate_fd_wait_for_unfreeze() return errors
buffered_file: make buffered_flush return the error code
buffered_file: callers of buffered_flush() already check for errors
buffered_file: We can access directly to bandwidth_limit
buffered_file: unfold migrate_fd_close
...
* qemu-kvm/memory/dma: (23 commits)
pci: honor PCI_COMMAND_MASTER
pci: give each device its own address space
memory: add address_space_destroy()
dma: make dma access its own address space
memory: per-AddressSpace dispatch
s390: avoid reaching into memory core internals
memory: use AddressSpace for MemoryListener filtering
memory: move tcg flush into a tcg memory listener
memory: move address_space_memory and address_space_io out of memory core
memory: manage coalesced mmio via a MemoryListener
xen: drop no-op MemoryListener callbacks
kvm: drop no-op MemoryListener callbacks
xen_pt: drop no-op MemoryListener callbacks
vfio: drop no-op MemoryListener callbacks
memory: drop no-op MemoryListener callbacks
memory: provide defaults for MemoryListener operations
memory: maintain a list of address spaces
memory: export AddressSpace
memory: prepare AddressSpace for exporting
xen_pt: use separate MemoryListeners for memory and I/O
...
Currently we ignore PCI_COMMAND_MASTER completely: DMA succeeds even when
the bit is clear.
Honor PCI_COMMAND_MASTER by inserting a memory region into the device's
bus master address space, and tying its enable status to PCI_COMMAND_MASTER.
Tested using
setpci -s 03 COMMAND=3
while a ping was running on a NIC in slot 3. The kernel (Linux) detected
the stall and recovered after the command
setpci -s 03 COMMAND=7
was issued.
Signed-off-by: Avi Kivity <avi@redhat.com>
Accesses from different devices can resolve differently
(depending on bridge settings, iommus, and PCI_COMMAND_MASTER), so
set up an address space for each device.
Currently iommus are expressed outside the memory API, so this doesn't
work if an iommu is present.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of accessing the cpu address space, use an address space
configured by the caller.
Eventually all dma functionality will be folded into AddressSpace,
but we have to start from something.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Using the AddressSpace type reduces confusion, as you can't accidentally
supply the MemoryRegion you're interested in.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use LOG_GUEST_ERROR rather than hw_error or direct fprintf.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use LOG_UNIMP and LOG_GUEST_ERROR where appropriate rather
than hw_error().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use the new LOG_UNIMP and LOG_GUEST_ERROR logging types rather
than hw_error().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If the guest attempts an offset to a nonexistent register, just
log this via LOG_GUEST_ERROR rather than killing QEMU with a hw_error.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use the new LOG_UNIMP tracing to report unimplemented
features.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rather than a mix of direct printing to stderr and aborting
via hw_error(), use LOG_UNIMP and LOG_GUEST_ERROR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an include of qemu-log.h to hw.h, so that device model
code has access to these logging functions without the need
to directly include qemu-log.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This should help us to:
- More easily add or remove machine initialization arguments without
having to change every single machine init function;
- More easily make mechanical changes involving the machine init
functions in the future;
- Let machine initialization forward the init arguments to other
functions more easily.
This change was half-mechanical process: first the struct was added with
the local ram_size, boot_device, kernel_*, initrd_*, and cpu_model local
variable initialization to all functions. Then the compiler helped me
locate the local variables that are unused, so they could be removed.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds a mmio bar to the qemu standard vga which allows to
access the standard vga registers and bochs dispi interface registers
via mmio.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu_fseek() is known to be wrong. Would be removed on the next
commit. This code should never been used (value has been
MAC_TABLE_ENTRIES since 2009).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Calling memory_region_destroy() within a transaction is illegal, since
the memory API is allowed to continue to dispatch to a region until the
transaction commits. 440fx does that however when managing PAM registers.
This bug is benign, since the regions are all aliases (which the memory
core tends to throw anyway), and since we don't do concurrent dispatch yet,
but instead of relying on that, tighten ship ahead of the coming concurrency
storm.
Fix by having a predefined set of regions, of which one will be enabled at
any time.
Signed-off-by: Avi Kivity <avi@redhat.com>
Using an unfiltered memory listener will cause regions to be reported
fails multiple times if we have more than two address spaces. Use a separate
listener for memory and I/O, and utilize MemoryListener's address space
filtering to fix this.
Signed-off-by: Avi Kivity <avi@redhat.com>
Needed for changing qemu_cpu_kick() argument type to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Needed for changing cpu_kick_irq() argument type to SPARCCPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Needed for changing qemu_cpu_kick() argument type to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Needed for changing cpu_kick_irq() argument type to SPARCCPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* pmaydell/arm-devs.for-upstream:
arm_gic: Rename gic_state to GICState
zynq_slcr: Fixed ResetValues enum
versatilepb: add gpio pl061 support
hw/ds1338: Implement state save/restore
hw/ds1338: Remove 'now' field from state struct
hw/ds1338: Recapture current time when register pointer wraps around
hw/ds1338: Fix mishandling of register pointer
hw/arm_gic.c: Fix improper DPRINTF output.
cadence_ttc: Fix 'clear on read' behavior
* kraxel/usb.67:
uhci: Raise interrupt when requested even for non active tds
usb-redir: Don't make migration fail in none seamless case
usb-redir: Change usbredir_open_chardev into usbredir_create_parser
* stefanha/net:
net: consolidate NetClientState header files into one
virtio-net: update nc.link_down in virtio_net_load()
e1000: update nc.link_down in e1000_post_load()
rtl8139: implement 8139cp link status
* spice/spice.v61:
qxl: set default revision to 4
spice: raise requirement to 0.12
hw/qxl: qxl_dirty_surfaces: use uintptr_t
hw/qxl: fix condition for exiting guest_bug
hw/qxl: exit on failure to register qxl interface
qxl: fix range check for rev3 io commands.
qxl/update_area_io: cleanup invalid parameters handling
qxl: always update displaysurface on resize
Rename the gic_state struct to match QEMU's coding style conventions
for structure names, since the impending KVM-for-ARM patches will
create another subclass of it. This patch was created using:
sed -i 's/gic_state/GICState/g' hw/arm_gic.c hw/arm_gic_common.c \
hw/arm_gic_internal.h hw/armv7m_nvic.c
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a gap in the reset region of the address space at offset 0x208. This
throws out all these enum values by one when translating them to address offsets.
Fixed by putting the corresponding gap in the enum as well.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement state save/restore for the DS1338. This requires
the usual minor adjustment of types in the state struct to
get fixed-width ones with vmstate macros.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'struct tm now' field in the state structure is in fact only
ever used as a temporary (the actual RTC state is held in 'offset').
Remove it from the state structure in favour of using local variables
to avoid confusion about whether it needs to be saved on migration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The DS1338 datasheet documents that the current time is captured into
the secondary registers when the register pointer wraps round to zero
as well as at a START condition. Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Correct several deficiencies in the handling of the register pointer:
* it should wrap around after 0x3f, not 0xff
* guard against the caller handing us an out of range pointer
(on h/w this can never happen, because only a 7 bit value is
transferred over the I2C bus)
* there was confusion over whether nvram[] holds only the 56 bytes
of guest-accessible NVRAM, or also the secondary registers
which hold the value of the clock captured at the start of a
multibyte read. Correct to consistently be the latter, by fixing
the array size and the offset used for NVRAM writes.
* ds1338_send was attempting to use 'data' as both the data and
the register offset simultaneously, which meant that writes to
any register were broken; fix to use the register pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
s->cpu_enabled is an array, so s->cpu_enabled ? "En" : "Dis" returns
"En" always. We should use s->cpu_enabled[cpu] here.
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A missing call to qemu_set_irq() when reading the IRQ register
required SW to write to the IRQ register to acknowledge an
interrupt. With this patch the behavior is fixed:
- Reading the interrupt register clears it and updates the timers
interrupt status
- Writes to the interrupt register are ignored
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the spec we must raise an interrupt when one is requested
even for non active tds.
Linux depends on this, for bulk transfers it runs an inactivity timer
to work around a bug in early uhci revisions, when we take longer then
200 ms to process a packet, this timer goes of, and as part of the
handling Linux then unlinks the qh, and relinks it after the frindex
has increased by atleast 1, the problem is Linux only checks for the
frindex increases on an interrupt, and we don't send that, causing
the qh to go inactive for more then 32 frames, at which point we
consider the packet cancelled.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead simple disconnect the device like host redirection does on
migration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Added helper function to automatically connect SPI slaves based on the QOM child
nodes of a device. A SSI master device can call this routine to automatically
hook-up all child nodes to its SPI bus.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Added the two SPI controllers to the zynq machine model. Attached two SPI flash
devices to each controller.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Added device model for the Xilinx Zynq SPI controller (SPIPS).
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Added SPI controller to the reference design, with two n25q128 spi-flashes
connected.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Removed the explicit SSI mux and wired the CS line directly up to the SSI
devices.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Allow multiple qdev_init_gpio_in() calls for the one device. The first call will
define GPIOs 0-N-1, the next GPIOs N- ... . Allows different GPIOs to be handled
with different handlers. Needed when two levels of the QOM class heirachy both
define GPIO functionality, as a single GPIO handler with an index selecter is
not possible.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Slave creation function that can be used to create an SSI slave without
qdev_init() being called. This give machine models a chance to set properties.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Added default CS behaviour for SSI slaves. SSI devices can set a property
to enable CS behaviour which will create a GPIO on the device which is the
CS. Tristating of the bus on SSI transfers is implemented.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Removed assertion that only one device is attached to the SSI bus.
When multiple devices are attached, all slaves have their transfer function
called for transfers. Each device is responsible for knowing whether or not its
CS is active, and if not returning 0. The returned data is the logical or of
all responses from the (mulitple) devices.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
DO_UPCAST is supposed to translate from the first member of a struct to
that struct, not from arbitrary ones. And it (usually) breaks the build
when neglecting this rule. Use container_of to fix the build breakage
and likely also the runtime behavior.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
aw: runtime behavior is actually the same, but clearly misuse of DO_UPCAST
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Blue Swirl reports that Clang doesn't like the structure we define to
avoid dynamic allocation for a number of calls to VFIO_DEVICE_SET_IRQS.
Adding an element after a variable sized type is a GNU extension.
Switch back to dynamic allocation, which really isn't a problem since
this is only done on interrupt setup changes.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Take what we've learned from pci-assign and apply it to vfio-pci.
On reset, disable previous interrupt config, perform a device
reset if available, re-enable INTx, and disable memory regions on
the device to prevent continuing DMA.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This was a misinterpretation of the spec, hardware doesn't get to
specify how many were actually enabled through this field.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We try to do lazy initialization of MSIX since we don't actually need
to setup anything until MSIX vectors start getting used. This leads
to problems if MSIX is enabled, but never used (we can end up trying
to re-enable INTx while it's still enabled). We also run into
problems trying to expand our reset function to tear down interrupts
as we can then get vector release notifications after we've released
data structures. By making explicit initialization and teardown we
can avoid both of these problems and behave more similar to bare
metal.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Occasionally we get regions added that overlap with existing mappings.
These always seems to be in the VGA ROM range. VFIO returns EBUSY
for these mapping attempts. We can try a little harder and assume
that the latest mapping is correct by removing any overlapping ranges
and retrying the original request.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We can't afford the overhead of switching out and back into mmap mode
around each interrupt, but we can do it lazily via a timer. On INTx
interrupt, disable the mmap'd memory regions and set a timer. On
every interrupt, push the timer out. If the timer expires and the
interrupt is no longer pending, switch back to mmap mode.
This has the benefit that things like graphics cards, which rarely or
never, fire an interrupt don't need manual user intervention to add
the x-intx=off parameter. They'll just remain in mmap mode until they
trigger an interrupt, and if they don't continue to regularly fire
interrupts, they'll switch back.
The default timeout is tuned for network cards so that a ping is just
enough to keep them in non-mmap mode, where they have much better
latency. It is tunable with an experimental option,
x-intx-mmap-timeout-ms. A value of 0 keeps the device in non-mmap
mode after the first interrupt.
It's possible we could look at the class code of devices and come up
with reasonable per-class defaults based on expected interrupt
frequency and latency. None of this is used for MSI interrupts and
also won't be used if we can bypass through KVM.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
nc.link_down could not be migrated, this patch updates link_down in
virtio_post_load() to keep it coincident with real link status.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
This patch introduced e1000_post_load(), it will be called in the end of
migration. nc.link_down could not be migrated, this patch updates
link_down in e1000_post_load() to keep it coincident with real link
status.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Add a link status chang callback and change the link status bit in BMSR
& MSR accordingly. Tested in Linux/Windows guests.
The link status bit of MediaStatus is infered from BasicModeStatus,
they are inverse.
nc.link_down could not be migrated, this patch updates link_down in
rtl8139_post_load() to keep it coincident with real link status.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
With the next qemu version (1.3) we are going to bump the qxl device
revision to 4. The new features available require a recent spice-server
version, so raise up the bar. Otherwise we would end up with different
qxl revisions depending on the spice-server version installed, which
would be a major PITA when it comes to compat properties.
Clear out a big bunch of #ifdefs which are not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As suggested by Paolo Bonzini, to avoid possible integer overflow issues.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This prevents a segfault later on when the device reset handler
tries to access a NULL ssd.worker since interface_attach_worker has
not been called.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Enables QXL_IO_FLUSH_SURFACES_ASYNC and QXL_IO_FLUSH_RELEASE
which are part of the qxl rev3 feature set.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This cleans up two additions of almost the same code in commits
511b13e2c9 and ccc2960d65. While at it, make error paths
consistent (always use 'break' instead of 'return').
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Dunrong Huang <riegamaths@gmail.com>
Cc: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't try to be clever and skip displaysurface reinitialization in case
the size hasn't changed. Other parameters might have changed
nevertheless, for example depth or stride, resulting in rendering being
broken then.
Trigger: boot linux guest with vesafb, start X11, make sure both vesafb
and X11 use the display same resolution. Then watch X11 screen being
upside down.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* 'trivial-patches' of git://github.com/stefanha/qemu:
versatilepb: Use symbolic indices for ARM PIC
qdev: kill bogus comment
qemu-barrier: Fix compiler version check for future gcc versions
hw: Add missing 'static' attribute for QEMUMachine
cleanup useless return sentence
qemu-sockets: Fix compiler warning (regression for MinGW)
vnc: Fix spelling (hellmen -> hellman) in comment
slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
cpu: Add missing 'static' attribute to qemu_global_mutex
configure: Support empty target list (--target-list=)
hw: Fix return value check for bdrv_read, bdrv_write
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (35 commits)
PPC: KVM: Fix BAT put
PPC: e500: Only expose even TLB sizes in initial TLB
ppc/pseries: Reset VPA registration on CPU reset
pseries: Don't test for MSR_PR for hypercalls under KVM
PPC: e500: calculate initrd_base like dt_base
PPC: e500: increase DTC_LOAD_PAD
device tree: simplify dumpdtb code
fdt: move dumpdtb interpretation code to device_tree.c
target-ppc: Remove unused power_mode field from cpu state
pseries: Set hash table size based on RAM size
pseries: Remove unnecessary locking from PAPR hash table hcalls
ppc405_uc: Fix buffer overflow
target-ppc: KVM: Fix some kernel version edge cases for kvmppc_reset_htab()
pseries: Fix semantics of RTAS int-on, int-off and set-xive functions
pseries: Rework implementation of TCE bypass
pseries: Remove never used flags field from spapr vio devices
pseries: Remove XICS irq type enum type
pseries: Remove C bitfields from xics code
pseries: Small cleanup to H_CEDE implementation
pseries: Fix XICS reset
...
Now that all machines call isa_vga_init() or pci_vga_init(), some unused
code can be removed.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The CONFIG_SPICE is now tested in vl.c and thus not needed anymore.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As a bonus it allows new vga card types (including none).
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Keep the case to prevent some vga card to be selected.
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As a bonus it allows new vga card types (including none).
Acked-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This remove the fallback to std-vga in case, as availability of the
requested vga device is now tested in vl.c, and returns an error message
to the user.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This function create a ISA VGA device according to the value of
vga_interface_type. It returns a ISADevice (and not a DeviceState).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This function create a PCI VGA device according to the value of
vga_interface_type. It returns a PCIDevice (and not a DeviceState).
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This better explains what is this function about. Adjust all callers.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This better explains what is this function about. Adjust all callers.
Cc: Alexander Graf <agraf@suse.de>
Cc: Andreas Färber <andreas.faerber@web.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The entries for libhw* are no longer needed in .gitignore.
There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is more readable, and all other code does it like that, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
When the DeviceInfo code was removed, the comment describing
qdev_subclass_init() was left in the code by mistake. Remove it.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
It was missing for leon3 and mips_fulong2e.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Implement the century byte in the RTC emulation, and test that it works.
This leads to some annoying compatibility code because we need to treat
a value of 2000 for the base_year property as "use the century byte
properly" (which would be a value of 0).
The century byte will now be always-zero, rather than always-20,
for the MIPS Magnum machine whose base_year is 1980. Commit 42fc73a
(Support epoch of 1980 in RTC emulation for MIPS Magnum, 2009-01-24)
correctly said:
With an epoch of 1980 and a year of 2009, one could argue that [the
century byte] should hold either 0, 1, 19 or 20. NT 3.50 on MIPS
does not read the century byte.
so I picked the simplest and most sensible implementation which is to
return 0 for 1980-2079, 1 for 2080-2179 and so on.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU's attempt to implement the century byte cover two possible places
for the byte. A common one on modern chipsets is 0x32, but QEMU also
stores the value in 0x37 (apparently for IBM PS/2 compatibility---it's
only been 25 years). To simplify the implementation of the century
byte, store it only at 0x32 but remap transparently 0x37 to 0x32 when
reading and writing from CMOS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Adjust all uses s/strzcpy/strncpy/ and mark these uses
of strncpy as "ok".
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't use strncpy when the source string is known to fit
in the destination buffer. Use equivalent memcpy.
We could even use strcpy, here, but some static analyzers
warn about that, so don't add new uses.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In all of these cases, the uses of strncpy were unnecessary, since
at each point of use we know that the NUL-terminated source bytes
fit in the destination buffer. Use memcpy in place of strncpy.
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In bt_hci_name_req a failed snprintf could return len larger than
sizeof(params.name), which means the following memset call would
have a "length" value of (size_t)-1, -2, etc... Sounds scary.
But currently, one can deduce that there is no problem:
strlen(slave->lmp_name) is guaranteed to be smaller than
CHANGE_LOCAL_NAME_CP_SIZE, which is the same as sizeof(params.name),
so this cannot happen. Regardless, there is no justification for
using snprintf+memset. Use pstrcpy instead.
Also, in bt_hci_event_complete_read_local_name, use pstrcpy in place
of unwarranted strncpy.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Actually do what the comment says, using pstrcpy NUL-terminate:
strncpy does not always do that.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
v9fs_add_dir_node and qemu_v9fs_synth_add_file used strncpy
to form node->name, which requires NUL-termination, but
strncpy does not ensure NUL-termination.
Use pstrcpy, which does.
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use g_strdup rather than strdup, because the sole caller
(qdev_get_fw_dev_path_helper) assumes it gets non-NULL, and dereferences
it. Besides, in that caller, the allocated buffer is already freed with
g_free, so it's better to allocate with a matching g_strdup.
In one case, (scsi-bus.c) it was trivial, so I replaced an snprintf+
g_strdup combination with an equivalent g_strdup_printf use.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Those functions return -errno in case of an error.
The old code would typically only detect EPERM (1) errors.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
* sstabellini/xen-2012-10-03:
xen: Set the vram dirty when an error occur.
exec, memory: Call to xen_modified_memory.
exec: Introduce helper to set dirty flags.
xen: Introduce xen_modified_memory.
QMP, Introduce xen-set-global-dirty-log command.
qemu/xen: Add 64 bits big bar support on qemu
xen: Fix, no unplug of pt device by platform device.
* kwolf/for-anthony: (30 commits)
qemu-iotests: add tests for streaming error handling
qemu-iotests: map underscore to dash in QMP argument names
blkdebug: process all set_state rules in the old state
stream: add on-error argument
block: introduce block job error
iostatus: reorganize io error code
iostatus: change is_read to a bool
iostatus: move BlockdevOnError declaration to QAPI
iostatus: rename BlockErrorAction, BlockQMPEventAction
qemu-iotests: add test for pausing a streaming operation
qmp: add block-job-pause and block-job-resume
block: add support for job pause/resume
qmp: add 'busy' member to BlockJobInfo
block: add block_job_query
block: move job APIs to separate files
block: fix documentation of block_job_cancel_sync
qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE
qemu-iotests: add initial tests for live block commit
QAPI: add command for live block commit, 'block-commit'
block: helper function, to find the base image of a chain
...
* qmp/queue/qmp:
block: live snapshot documentation tweaks
input: index_from_key(): drop unused code
qmp: qmp_send_key(): accept key codes in hex
input: qmp_send_key(): simplify
hmp: dump-guest-memory: hardcode protocol argument to "file:"
qmp: dump-guest-memory: don't spin if non-blocking fd would block
qmp: dump-guest-memory: improve schema doc (again)
qapi: convert add_client
monitor: add Error * argument to monitor_get_fd
pci-assign: use monitor_handle_fd_param
qapi: add "unix" to the set of reserved words
qapi: do not protect enum values from namespace pollution
Add qemu-ga-client script
Support settimeout in QEMUMonitorProtocol
Make negotiation optional in QEMUMonitorProtocol
* mst/tags/for_anthony:
virtio-serial-bus: let chardev know the exact number of bytes requested
virtio: Introduce virtqueue_get_avail_bytes()
virtio: use unsigned int for counting bytes in vq
iov: add const annotation
virtio-net: fix used len for tx
virtio: don't mark unaccessed memory as dirty
* kraxel/usb.66:
usb: Fix usb_packet_map() in the presence of IOMMUs
usb-redir: Adjust pkg-config check for usbredirparser .pc file rename (v2)
ehci: Fix interrupt packet MULT handling
xhci: create a memory region for each port
xhci: route string & usb hub support
xhci: tweak limits
compat: turn off msi/msix on xhci for old machine types
add pc-1.3 machine type
Conflicts:
hw/pc_piix.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations. Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When booting our e500 machine, we automatically generate a big TLB entry
in TLB1 that covers all of the code we need to run in there until the guest
can handle its TLB on its own.
However, e500v2 can only handle MAS1.0 sizes. However, we keep our TLB
information in MAS2.0 layout, which means we have twice as many TLB sizes
to choose from. That also means we can run into a situation where we try
to add a TLB size that could not fit into the MAS1.0 size bits.
Fix it by making sure we always have the lower bit set to 0. That way we
are always guaranteed to have MAS1.0 compatible TLB size information.
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR hypercalls should only be invoked from the guest kernel, not guest
user programs, that is, with MSR[PR]=0. Currently we check this in
spapr_hypercall, returning H_PRIVILEGE if MSR[PR]=1.
However, under KVM the state of MSR[PR] is already checked by the host
kernel before passing the hypercall to qemu, making this check redundant.
Worse, however, we don't generally synchronize KVM and qemu state on the
hypercall path, meaning that qemu could incorrectly reject a hypercall
because it has a stale MSR value.
This patch fixes the problem by moving the privilege test exclusively to
the TCG hypercall path.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
CC: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
While investigating dtb pad issues, I noticed that initrd_base wasn't taking
loadaddr into account the way dt_base was. This seems wrong.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
An allowance of 5 MiB for BSS is not enough for Linux kernels with certain
debug options enabled (not sure exactly which one caused it, but I'd guess
lockdep). The kernel I ran into this with had a BSS of around 6.4 MB.
Unfortunately, uImage does not give us enough information to determine the
actual BSS size. Increase the allowance to 18 MiB to give us plenty of
room. Eventually this should be more intelligent, possibly packing
initrd+dtb at the end of guest RAM.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the pseries machine code always attempts to set the size of the
guests's hash page table to 16MB. However, because of the way the POWER
MMU works, a suitable hash page table size should really depend on memory
size. 16MB will be excessive for guests with <1GB and RAM, and may not be
enough for guests with >2GB of RAM (depending on guest page size and
other factors).
The usual given rule of thumb is that the hash table should be 1/64 of
the size of memory, but in fact the Linux guests we are aiming at don't
really need that much. This patch, therefore, changes the hash table
allocation code to aim for 1/128 of the size of RAM (rounding up). When
using KVM, this size may still be adjusted by the host kernel if it is
unable to allocate a suitable (contiguous) table.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
In the paravirtualized environment provided by PAPR, there is a standard
locking scheme so that hypercalls updating the hash page table from
different guest threads don't corrupt the haah table state. We implement
this HVLOCK bit in out page table hypercalls. However, it is not necessary
in our case, since the hypercalls all run in the qemu environment under the
big qemu lock.
Therefore, this patch removes the locking code. This has the additional
advantage of freeing up a hash PTE bit which will be useful for migration
support.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Report from smatch:
ppc405_uc.c:209 dcr_read_pob(12) error: buffer overflow 'pob->besr' 2 <= 2
ppc405_uc.c:232 dcr_write_pob(12) error: buffer overflow 'pob->besr' 2 <= 2
The old code reads and writes besr[POB0_BESR1 - POB0_BESR0] or besr[2]
which is one too much.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the ibm,int-on and ibm,int-off RTAS functions are implemented as
no-ops. This is because when implemented as specified in PAPR they caused
Linux (which calls both int-on/off and set-xive) to end up with interrupts
masked when they should not be. Since Linux's set-xive calls make the
int-on/off calls redundant, making them nops worked around the problem.
In fact, the problem was caused because there was a subtle bug in set-xive,
PAPR specifies that as well as updating the current priority, it also needs
to update the saved priority used by int-on/off. With this bug fixed the
problem goes away. This patch implements this more correct fix.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
On the pseries machine the IOMMU (aka TCE tables) is always active for all
PCI and VIO devices. Mostly to simplify the SLOF firmware, we implement an
extension which allows the IOMMU to be temporarily disabled for certain
devices.
Currently this is implemented by setting the device's DMAContext pointer to
NULL (thus reverting to qemu's default no-IOMMU DMA behaviour), then
replacing it when bypass mode is disabled.
This approach causes a bunch of complications though. It complexifies the
management of the DMAContext lifetimes, it's problematic for savevm/loadvm,
and it means that while bypass is active we have nowhere to store the
device's LIOBN (Logical IO Bus Number, used to identify DMA address
spaces). At present we regenerate the LIOBN from other address information
but this restricts how we can allocate LIOBNs.
This patch gives up on this approach, replacing it with the much simpler
one of having a 'bypass' boolean flag in the TCE state structure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The general device state structure for PAPR VIO emulated devices includes a
'flags' field which was never used. This patch removes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the XICS interrupt controller emulation uses a custom enum to
specify whether a given interrupt is level-sensitive or message-triggered.
This enum makes life awkward for saving the state, and isn't particularly
useful since there are only two possibilities. This patch replaces the
enum with a simple bool.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The XICS interrupt controller emulation uses some C bitfield variables in
its internal state structure. This makes like awkward for saving the state
because we don't have easy VMSTATE helpers for bitfields.
This patch removes the bitfields, instead using explicit bit masking in a
single status variable.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The H_CEDE hypercall implementation for the pseries machine doesn't trigger
quite the right path in the main cpu exec loop. We should set exit_request
to pop up one extra level and recheck state, and we should set the
exception_index to EXCP_HLT (H_CEDE is roughly equivalent to the hlt
instruction on x86).
In practice, this doesn't really matter except for KVM, and KVM implements
H_CEDE internally so we never hit this code path. But we might as well
get it right, just in case it matters some day.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The XICS interrupt controller used on the pseries machine currently has no
reset handler. We can get away with this under some circumstances, but
it's not correct, and can cause failures if the XICS happens to be in the
wrong state at the time of reset.
This patch adds a hook to properly reset the XICS state.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The emulated PCI host bridge on the pseries machine incorporates an IOMMU
(PAPR TCE table). Currently the mappings in this IOMMU are not cleared
when we reset the system. This patch fixes this bug. To do this it adds
a new reset function to the IOMMU emulation code. The VIO devices already
reset their TCE tables, but they do so by destroying and re-creating their
DMA context. This doesn't work for the PCI host bridge, because the
infrastructure for PCI IOMMUs has already copied/cached the DMA pointer
context into the subordinate PCI device structures.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
When we reset the system, the reset method for VIO bus devices resets
the state of their request queue (if present) as it should. However
it was not resetting the state of their TCE table (DMA translation) if
present. It was also not resetting the state of the per-device signal
mask set with H_VIO_SIGNAL. This patch corrects both bugs, and also
removes some small code duplication in the reset paths.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds support for then new "reset htab" ioctl which allows qemu
to properly cleanup the MMU hash table when the guest is reset. With
the corresponding kernel support, reset of a guest now works properly.
This also paves the way for indicating a different size hash table
to the kernel and for the kernel to be able to impose limits on
the requested size.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
A number of things need to occur during reset of the PAPR
paravirtualized platform in a specific order. For example, the hash
table needs to be cleared before the CPUs are reset, so that they
initialize their register state correctly, and the CPUs need to have
their main reset called before we set up the entry point state on the
boot cpu. We also need to have the main qdev reset happen before the
creation and installation of the device tree for the new boot, because
we need the state of the devices settled to correctly construct the
device tree.
We currently do the pseries once-per-reset initializations done from a
reset handler. However we can't adequately control when this handler
is called during the reset - in particular we can't guarantee it
happens after all the qdev resets (since qdevs might be registered
after the machine init function has executed).
This patch uses the new QEMUMachine reset method to to fix this
problem, ensuring the various order dependent reset steps happen in
the correct order.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current pseries machine init function iterates over the CPUs at several
points, doing various bits of initialization. This is messy; these can
and should be merged into a single iteration doing all the necessary per
cpu initialization. Worse, some of these initializations were setting up
state which should be set on every reset, not just at machine init time.
A few of the initializations simply weren't necessary at all.
This patch, therefore, moves those things that need to be to the
per-cpu reset handler, and combines the remainder into two loops over
the cpus (which also creates them). The second loop is for setting up
hash table information, and will be removed in a subsequent patch also
making other fixes to the hash table setup.
This exposes a bug in our start-cpu RTAS routine (called by the guest to
start up CPUs other than CPU0) under kvm. Previously, this function did
not make a call to ensure that it's changes to the new cpu's state were
pushed into KVM in-kernel state. We sort-of got away with this because
some of the initializations had already placed the secondary CPUs into the
right starting state for the sorts of Linux guests we've been running.
Nonetheless the start-cpu RTAS call's behaviour was not correct and could
easily have been broken by guest changes. This patch also fixes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This function is to be used during live migration. Every write access to the
guest memory should call this funcion so the Xen tools knows which pages are
dirty.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Currently it is assumed PCI device BAR access < 4G memory. If there is such a
device whose BAR size is larger than 4G, it must access > 4G memory address.
This patch enable the 64bits big BAR support on qemu.
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The Xen platform device will unplug any NICs if requested by the guest (PVonHVM)
including a NIC that would have been passthrough. This patch makes sure that a
passthrough device will not be unplug.
Reported-by: "Zhang, Yang Z" <yang.z.zhang@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
We cannot cast directly from pointer to uint64.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alex Barcelo <abarcelo@ac.upc.edu>
Reported-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Enabled for all softmmu guests supporting PCI on Linux hosts. Note
that currently only x86 hosts have the kernel side VFIO IOMMU support
for this. PPC (g3beige) is the only non-x86 guest known to work.
ARM (veratile) hangs in firmware, others untested.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the core of the QEMU VFIO-based PCI device assignment driver.
To make use of this driver, enable CONFIG_VFIO, CONFIG_VFIO_IOMMU_TYPE1,
and CONFIG_VFIO_PCI in your host Linux kernel config. Load the vfio-pci
module. To assign device 0000:05:00.0 to a guest, do the following:
for dev in $(ls /sys/bus/pci/devices/0000:05:00.0/iommu_group/devices); do
vendor=$(cat /sys/bus/pci/devices/$dev/vendor)
device=$(cat /sys/bus/pci/devices/$dev/device)
if [ -e /sys/bus/pci/devices/$dev/driver ]; then
echo $dev > /sys/bus/pci/devices/$dev/driver/unbind
fi
echo $vendor $device > /sys/bus/pci/drivers/vfio-pci/new_id
done
See Documentation/vfio.txt in the Linux kernel tree for further
description of IOMMU groups and VFIO.
Then launch qemu including the option:
-device vfio-pci,host=0000:05:00.0
Legacy PCI interrupts (INTx) currently makes use of a kludge where we
trap BAR accesses and assume the access is in response to an interrupt,
therefore de-asserting and unmasking the interrupt. It's not quite as
targetted as using the EOI for this, but it's self contained and seems
to work across all architectures. The side-effect is a significant
performance slow-down for device in INTx mode. Some devices, like
graphics cards, don't really use their interrupt, so this can be turned
off with the x-intx=off option, which disables INTx alltogether. This
should be considered an experimental option until we refine this code.
Both MSI and MSI-X are supported and avoid these issues.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the common part of IDE/SCSI/virtio error handling to the block
layer. The new function bdrv_error_action subsumes all three of
bdrv_emit_qmp_error_event, vm_stop, bdrv_iostatus_set_err.
The same scheme will be used for errors in block jobs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Do this while we are touching this part of the code, before introducing
more uses of "int is_read".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let block-stream reuse the enum. Places that used the enums
are renamed accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to remove knowledge of BLOCK_ERR_STOP_ENOSPC from drivers;
drivers should only be told whether to stop/report/ignore the error.
On the other hand, we want to keep using the nicer BlockErrorAction
name in the drivers. So rename the enums, while leaving aside the
names of the enum values for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using the virtqueue_avail_bytes() function had an unnecessarily
crippling effect on the number of bytes needed by the guest as reported
to the chardev layer in the can_read() callback.
Using the new virtqueue_get_avail_bytes() function will let us advertise
the exact number of bytes we can send to the guest.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current virtqueue_avail_bytes() is oddly named, and checks if a
particular number of bytes are available in a vq. A better API is to
fetch the number of bytes available in the vq, and let the caller do
what's interesting with the numbers.
Introduce virtqueue_get_avail_bytes(), which returns the number of bytes
for buffers marked for both, in as well as out. virtqueue_avail_bytes()
is made a wrapper over this new function.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtqueue_avail_bytes() function counts bytes in an int. Use an
unsigned int instead.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
offset of accessed buffer is calculated using iov_length, so it
can exceed accessed len. If that happens
math in len - offset wraps around, and size becomes wrong.
As real value is 0, so this is harmless but unnecessary.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds modelling of the two NOR flash banks found on the
Versatile Express motherboard. Tested with U-Boot running on an emulated
Versatile Express, with either A9 or A15 CoreTile.
Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the A series memory map (implemented in the Cortex A15 CoreTile), the
first NOR flash bank (flash 0) is mapped to address 0x08000000, while
address 0x00000000 can be configured as alias to either the first or the
second flash bank. This patch fixes the definition of flash 0 address,
and for simplicity removes the alias definition.
Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When setting up the NVIC memory regions the memory range
0x100..0xcff is aliased to an IO memory region that belongs
to the ARM GIC. This aliased region should be added to the
NVIC memory container, but the actual GIC IO memory region
was being added instead. This mixup was causing the wrong
IO memory access functions to be called when accessing parts
of the NVIC memory.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reading VECTADDR was causing us to set the current priority to
the wrong value, the most obvious effect of which was that we
would return the vector for the wrong interrupt as the result
of the read.
Signed-off-by: Brendan Fennell <bfennell@skynet.ie>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
