Missed during commit d537cf6c86 ("Unify IRQ handling")
when qemu_irq typedef was introduced for IRQState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240130111111.6372-1-philmd@linaro.org>
There is no use of ptimer functions in mips_cps.c or any other related
code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129115811.1039965-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Suppress the deprecation warning when we're running under qtest,
to avoid "make check" including warning messages in its output.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240206154151.155620-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add documentation for the mps3-an536 board type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-14-peter.maydell@linaro.org
Add the remaining devices (or unimplemented-device stubs) for
this board: SPI controllers, SCC, FPGAIO, I2S, RTC, the
QSPI write-config block, and ethernet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-13-peter.maydell@linaro.org
Add the GPIO, watchdog, dual-timer and I2C devices to the mps3-an536
board. These are all simple devices that just need to be created and
wired up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-12-peter.maydell@linaro.org
This board has a lot of UARTs: there is one UART per CPU in the
per-CPU peripheral part of the address map, whose interrupts are
connected as per-CPU interrupt lines. Then there are 4 UARTs in the
normal part of the peripheral space, whose interrupts are shared
peripheral interrupts.
Connect and wire them all up; this involves some OR gates where
multiple overflow interrupts are wired into one GIC input.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-11-peter.maydell@linaro.org
Create the CPUs, the GIC, and the per-CPU RAM block for
the mps3-an536 board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240206132931.38376-10-peter.maydell@linaro.org
The AN536 is another FPGA image for the MPS3 development board. Unlike
the existing FPGA images we already model, this board uses a Cortex-R
family CPU, and it does not use any equivalent to the M-profile
"Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c.
It's therefore more convenient for us to model it as a completely
separate C file.
This commit adds the basic skeleton of the board model, and the
code to create all the RAM and ROM. We assume that we're probably
going to want to add more images in future, so use the same
base class/subclass setup that mps2-tz.c uses, even though at
the moment there's only a single subclass.
Following commits will add the CPUs and the peripherals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-9-peter.maydell@linaro.org
The MPS2 SCC device is broadly the same for all FPGA images, but has
minor differences in the behaviour of the CFG registers depending on
the image. In many cases we don't really care about the functionality
controlled by these registers and a reads-as-written or similar
behaviour is sufficient for the moment.
For the AN536 the required behaviour is:
* A_CFG0 has CPU reset and halt bits
- implement as reads-as-written for the moment
* A_CFG1 has flash or ATCM address 0 remap handling
- QEMU doesn't model this; implement as reads-as-written
* A_CFG2 has QSPI select (like AN524)
- implemented (no behaviour, as with AN524)
* A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits"
- QEMU doesn't care about these, so use the existing
RAZ behaviour for convenience
* A_CFG4 is board rev (like all other images)
- no change needed
* A_CFG5 is ACLK frq in hz (like AN524)
- implemented as reads-as-written, as for other boards
* A_CFG6 is core 0 vector table base address
- implemented as reads-as-written for the moment
* A_CFG7 is core 1 vector table base address
- implemented as reads-as-written for the moment
Make the changes necessary for this; leave TODO comments where
appropriate to indicate where we might want to come back and
implement things like CPU reset.
The other aspects of the device specific to this FPGA image (like the
values of the board ID and similar registers) will be set via the
device's qdev properties.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-8-peter.maydell@linaro.org
The MPS SCC device has a lot of different flavours for the various
different MPS FPGA images, which look mostly similar but have
differences in how particular registers are handled. Currently we
deal with this with a lot of open-coded checks on scc_partno(), but
as we add more board types this is getting a bit hard to read.
Factor out the conditions into some functions which we can
give more descriptive names to.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-7-peter.maydell@linaro.org
We currently guard the CFG3 register read with
(scc_partno(s) == 0x524 && scc_partno(s) == 0x547)
which is clearly wrong as it is never true.
This register is present on all board types except AN524
and AN527; correct the condition.
Fixes: 6ac8081894 ("hw/misc/mps2-scc: Implement changes for AN547")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-6-peter.maydell@linaro.org
Architecturally, the AArch32 MSR/MRS to/from banked register
instructions are UNPREDICTABLE for attempts to access a banked
register that the guest could access in a more direct way (e.g.
using this insn to access r8_fiq when already in FIQ mode). QEMU has
chosen to UNDEF on all of these.
However, for the case of accessing SPSR_hyp from hyp mode, it turns
out that real hardware permits this, with the same effect as if the
guest had directly written to SPSR. Further, there is some
guest code out there that assumes it can do this, because it
happens to work on hardware: an example Cortex-R52 startup code
fragment uses this, and it got copied into various other places,
including Zephyr. Zephyr was fixed to not use this:
https://github.com/zephyrproject-rtos/zephyr/issues/47330
but other examples are still out there, like the selftest
binary for the MPS3-AN536.
For convenience of being able to run guest code, permit
this UNPREDICTABLE access instead of UNDEFing it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-5-peter.maydell@linaro.org
Add the Cortex-R52 IMPDEF sysregs, by defining them here and
also by enabling the AUXCR feature which defines the ACTLR
and HACTLR registers. As is our usual practice, we make these
simple reads-as-zero stubs for now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-4-peter.maydell@linaro.org
The Cortex-R52 implements the Configuration Base Address Register
(CBAR), as a read-only register. Add ARM_FEATURE_CBAR_RO to this CPU
type, so that our implementation provides the register and the
associated qdev property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-3-peter.maydell@linaro.org
We support two different encodings for the AArch32 IMPDEF
CBAR register -- older cores like the Cortex A9, A7, A15
have this at 4, c15, c0, 0; newer cores like the
Cortex A35, A53, A57 and A72 have it at 1 c15 c0 0.
When we implemented this we picked which encoding to
use based on whether the CPU set ARM_FEATURE_AARCH64.
However this isn't right for three cases:
* the qemu-system-arm 'max' CPU, which is supposed to be
a variant on a Cortex-A57; it ought to use the same
encoding the A57 does and which the AArch64 'max'
exposes to AArch32 guest code
* the Cortex-R52, which is AArch32-only but has the CBAR
at the newer encoding (and where we incorrectly are
not yet setting ARM_FEATURE_CBAR_RO anyway)
* any possible future support for other v8 AArch32
only CPUs, or for supporting "boot the CPU into
AArch32 mode" on our existing cores like the A57 etc
Make the decision of the encoding be based on whether
the CPU implements the ARM_FEATURE_V8 flag instead.
This changes the behaviour only for the qemu-system-arm
'-cpu max'. We don't expect anybody to be relying on the
old behaviour because:
* it's not what the real hardware Cortex-A57 does
(and that's what our ID register claims we are)
* we don't implement the memory-mapped GICv3 support
which is the only thing that exists at the peripheral
base address pointed to by the register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-2-peter.maydell@linaro.org
QDev objects created with qdev_new() need to manually add
their parent relationship with object_property_add_child().
Since we don't model the SoC, just use a QOM container.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240213155214.13619-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QDev objects created with qdev_new() need to manually add
their parent relationship with object_property_add_child().
This commit plug the devices which aren't part of the SoC;
they will be plugged into a SoC container in the next one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240213155214.13619-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240213155214.13619-3-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240213155214.13619-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An access fault is raised when the Access Flag is not set in the
looked-up PTE and the AFFD field is not set in the corresponding context
descriptor. This was already implemented for stage 2. Implement it for
stage 1 as well.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240213082211.3330400-1-luc.michel@amd.com
[PMM: tweaked comment text]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the nocm_gmac-test.c file to run on a nuvoton 7xx machine instead
of 8xx. Also fix comments referencing this and values expecting 8xx.
Change-Id: Iabd0fba14910c3f1e883c4a9521350f3db9ffab8
Signed-Off-By: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240208194759.2858582-2-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: commit message tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It doesn't make sense to read the value of MDCR_EL2 on a non-A-profile
CPU, and in fact if you try to do it we will assert:
#6 0x00007ffff4b95e96 in __GI___assert_fail
(assertion=0x5555565a8c70 "!arm_feature(env, ARM_FEATURE_M)", file=0x5555565a6e5c "../../target/arm/helper.c", line=12600, function=0x5555565a9560 <__PRETTY_FUNCTION__.0> "arm_security_space_below_el3") at ./assert/assert.c:101
#7 0x0000555555ebf412 in arm_security_space_below_el3 (env=0x555557bc8190) at ../../target/arm/helper.c:12600
#8 0x0000555555ea6f89 in arm_is_el2_enabled (env=0x555557bc8190) at ../../target/arm/cpu.h:2595
#9 0x0000555555ea942f in arm_mdcr_el2_eff (env=0x555557bc8190) at ../../target/arm/internals.h:1512
We might call pmu_counter_enabled() on an M-profile CPU (for example
from the migration pre/post hooks in machine.c); this should always
return false because these CPUs don't set ARM_FEATURE_PMU.
Avoid the assertion by not calling arm_mdcr_el2_eff() before we
have done the early return for "PMU not present".
This fixes an assertion failure if you try to do a loadvm or
savevm for an M-profile board.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2155
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240208153346.970021-1-peter.maydell@linaro.org
Currently QEMU will warn if there is a NIC on the board that
is not connected to a backend. By default the '-nic user' will
get used for all NICs, but if you manually connect a specific
NIC to a specific backend, then the other NICs on the board
have no backend and will be warned about:
qemu-system-arm: warning: nic npcm7xx-emc.1 has no peer
qemu-system-arm: warning: nic npcm-gmac.0 has no peer
qemu-system-arm: warning: nic npcm-gmac.1 has no peer
So suppress those warnings by manually connecting every NIC
on the board to some backend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240206171231.396392-3-peter.maydell@linaro.org
The patchset adding the GMAC ethernet to this SoC crossed in the
mail with the patchset cleaning up the NIC handling. When we
create the GMAC modules we must call qemu_configure_nic_device()
so that the user has the opportunity to use the -nic commandline
option to create a network backend and connect it to the GMACs.
Add the missing call.
Fixes: 21e5326a7c ("hw/arm: Add GMAC devices to NPCM7XX SoC")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-id: 20240206171231.396392-2-peter.maydell@linaro.org
Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a
non-secure EL2 virtual timer. We implemented the timer itself in the
CPU model, but never wired up its IRQ line to the GIC.
Wire up the IRQ line (this is always safe whether the CPU has the
interrupt or not, since it always creates the outbound IRQ line).
Report it to the guest via dtb and ACPI if the CPU has the feature.
The DTB binding is documented in the kernel's
Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml
and the ACPI table entries are documented in the ACPI specification
version 6.3 or later.
Because the IRQ line ACPI binding is new in 6.3, we need to bump the
FADT table rev to show that we might be using 6.3 features.
Note that exposing this IRQ in the DTB will trigger a bug in EDK2
versions prior to edk2-stable202311, for users who use the virt board
with 'virtualization=on' to enable EL2 emulation and are booting an
EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is
that EDK2 will assert on bootup:
ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48
If you see that assertion you should do one of:
* update your EDK2 binaries to edk2-stable202311 or newer
* use the 'virt-8.2' versioned machine type
* not use 'virtualization=on'
(The versions shipped with QEMU itself have the fix.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20240122143537.233498-3-peter.maydell@linaro.org
Allow changes to the virt GTDT -- we are going to add the IRQ
entry for a new timer to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20240122143537.233498-2-peter.maydell@linaro.org
We deliberately don't include qtests_npcm7xx in qtests_aarch64,
because we already get the coverage of those tests via qtests_arm,
and we don't want to use extra CI minutes testing them twice.
In commit 327b680877 we added it to qtests_aarch64; revert
that change.
Fixes: 327b680877 ("tests/qtest: Creating qtest for GMAC Module")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206163043.315535-1-peter.maydell@linaro.org
Suppress the deprecation warning when we're running under qtest,
to avoid "make check" including warning messages in its output.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206154151.155620-1-peter.maydell@linaro.org
The raven_io_ops MemoryRegionOps is the only one in the source tree
which sets .valid.unaligned to indicate that it should support
unaligned accesses and which does not also set .impl.unaligned to
indicate that its read and write functions can do the unaligned
handling themselves. This is a problem, because at the moment the
core memory system does not implement the support for handling
unaligned accesses by doing a series of aligned accesses and
combining them (system/memory.c:access_with_adjusted_size() has a
TODO comment noting this).
Fortunately raven_io_read() and raven_io_write() will correctly deal
with the case of being passed an unaligned address, so we can fix the
missing unaligned access support by setting .impl.unaligned in the
MemoryRegionOps struct.
Fixes: 9a1839164c ("raven: Implement non-contiguous I/O region")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20240112134640.1775041-1-peter.maydell@linaro.org
The TBI and TCMA bits are located within mtedesc, not desc.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These functions "use the standard load helpers", but
fail to clean_data_tbi or populate mtedesc.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Share code that creates mtedesc and embeds within simd_desc.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we added SVE_MTEDESC_SHIFT, we effectively limited the
maximum size of MTEDESC. Adjust SIZEM1 to consume the remaining
bits (32 - 10 - 5 - 12 == 5). Assert that the data to be stored
fits within the field (expecting 8 * 4 - 1 == 31, exact fit).
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The field is encoded as [0-3], which is convenient for
indexing our array of function pointers, but the true
value is [1-4]. Adjust before calling do_mem_zpa.
Add an assert, and move the comment re passing ZT to
the helper back next to the relevant code.
Cc: qemu-stable@nongnu.org
Fixes: 206adacfb8 ("target/arm: Add mte helpers for sve scalar + int loads")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The API does not generate an error for setting ASYNC | SYNC; that merely
constrains the selection vs the per-cpu default. For qemu linux-user,
choose SYNC as the default.
Cc: qemu-stable@nongnu.org
Reported-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Similarly to commits dadbb58f59..5ae79fe825 for other ARM boards,
connect FIQ output of the GIC CPU interfaces to the CPU.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240130152548.17855-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
/dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
+Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
=K4b1
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
# w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
# /dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
# mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
# +Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
# zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
# =K4b1
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Feb 2024 11:18:13 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (60 commits)
MAINTAINERS: Switch to my Enfabrica email
virtio-gpu-rutabaga.c: override resource_destroy method
virtio-gpu.c: add resource_destroy class method
hw/display/virtio-gpu.c: use reset_bh class method
hw/smbios: Fix port connector option validation
hw/smbios: Fix OEM strings table option validation
virtio-gpu: Correct virgl_renderer_resource_get_info() error check
hw/cxl: Standardize all references on CXL r3.1 and minor updates
hw/cxl: Update mailbox status registers.
hw/cxl: Update RAS Capability Definitions for version 3.
hw/cxl: Update link register definitions.
hw/cxl: Update HDM Decoder capability to version 3
tests/acpi: Update DSDT.cxl to reflect change _STA return value.
hw/i386: Fix _STA return value for ACPI0017
tests/acpi: Allow update of DSDT.cxl
hw/mem/cxl_type3: Fix potential divide by zero reported by coverity
hw/cxl: Pass NULL for a NULL MemoryRegionOps
hw/cxl: Pass CXLComponentState to cache_mem_ops
hw/cxl/device: read from register values in mdev_reg_read()
hw/cxl/mbox: Remove dead code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I'd prefer to use my new work email so this change updates MAINTAINERS
with it.
Signed-off-by: Raphael Norwitz <raphael.s.norwitz@gmail.com>
Message-Id: <20240204023758.83191-1-raphael.s.norwitz@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the Rutabaga GPU device frees resources, it calls
rutabaga_resource_unref for that resource_id. However, when the generic
VirtIOGPU functions destroys resources, it only removes the
virtio_gpu_simple_resource from the device's VirtIOGPU->reslist list.
The rutabaga resource associated with that resource_id is then leaked.
This commit overrides the resource_destroy class method introduced in
the previous commit to fix this.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <e3778e44c98a35839de2f4938e5355449fa3aa14.1706626470.git.manos.pitsidianakis@linaro.org>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When destroying/unrefing resources, devices such as virtio-gpu-rutabaga
need to do their own bookkeeping (free rutabaga resources that are
associated with the virtio_gpu_simple_resource).
This commit adds a class method so that virtio-gpu-rutabaga can override
it in the next commit.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <b0a86630c4d601f3a269fd7e08cfefc13bd4e219.1706626470.git.manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While the VirtioGPU type has a reset_bh field to specify a reset
callback, it's never used. virtio_gpu_reset() calls the general
virtio_gpu_reset_bh() function for all devices that inherit from
VirtioGPU.
While no devices override reset_bh at the moment, a device reset might
require special logic for implementations in the future.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <87fb4fa72ce5b341a6f957513a00dcb79fd5997f.1706626470.git.manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_smbios_type8_opts did not have the list terminator and that
resulted in out-of-bound memory access. It also needs to have an element
for the type option.
Cc: qemu-stable@nongnu.org
Fixes: fd8caa253c ("hw/smbios: support for type 8 (port connector)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240129-smbios-v2-2-9ee6fede0d10@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_smbios_type11_opts did not have the list terminator and that
resulted in out-of-bound memory access. It also needs to have an element
for the type option.
Cc: qemu-stable@nongnu.org
Fixes: 2d6dcbf93f ("smbios: support setting OEM strings table")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240129-smbios-v2-1-9ee6fede0d10@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virgl_renderer_resource_get_info() returns errno and not -1 on error.
Correct the return-value check.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20240129073921.446869-1-dmitry.osipenko@collabora.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously not all references mentioned any spec version at all.
Given r3.1 is the current specification available for evaluation at
www.computeexpresslink.org update references to refer to that.
Hopefully this won't become a never ending job.
A few structure definitions have been updated to add new fields.
Defaults of 0 and read only are valid choices for these new DVSEC
registers so go with that for now.
There are additional error codes and some of the 'questions' in
the comments are resolved now.
Update documentation reference to point to the CXL r3.1 specification
with naming closer to what is on the cover.
For cases where there are structure version numbers, add defines
so they can be found next to the register definitions.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst the reported version was 1 so there should be no changes,
a couple of fields (where the value 0 was valid) were not
defined. Make those explicit and update references to be based
on CXL r3.1.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
