Commit Graph

978 Commits

Author SHA1 Message Date
BALATON Zoltan
c208085a3e sm501: Optimise 1 pixel 2d ops
Some guests do 1x1 blits which is faster to do directly than calling a
function for it so avoid overhead in this case.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 7cccc302d7b4c5c313bad7681ac4686417143c3e.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
BALATON Zoltan
299778d5af sm501: Introduce variable for commonly used value for better readability
The bytes per pixel value can be calculated from format but it's used
freqently enough (and will be used more in subseqent patches) so store
it in a variable for better readabilty. Also drop some unneded 0x
prefix around where new variable is defined.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: b9ea5ef2d68583db9f3fb73a2b859abbd7c044a8.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
BALATON Zoltan
1cb62e3666 sm501: Ignore no-op blits
Some guests seem to try source copy blits with same source and dest
which are no-op so avoid calling pixman for these.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: a2a8214dd37344dfb65f1c343ace4cff2e94f3bb.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
BALATON Zoltan
4decaad9d2 sm501: Drop unneded variable
We don't need a separate variable to keep track if we allocated memory
that needs to be freed as we can test the pointer itself.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ff9136c3151a15cdfa1d9b7a68acf11cffb8efa4.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
BALATON Zoltan
84ec3f9402 sm501: Fix bounds checks
We don't need to add width to pitch when calculating last point, that
would reject valid ops within the card's local_mem.

Fixes: b15a22bbcb
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ddb5781d12913bb9d6dbfd9e5b1e2b893e2b3e2d.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
Markus Armbruster
5a147c8c51 sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 3
These are init/realize pairs produced by the previous commit's
Coccinelle script where the argument test doesn't quite match.  They
need even more careful review.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-50-armbru@redhat.com>
2020-06-15 22:06:04 +02:00
Markus Armbruster
3c6ef471ee sysbus: Convert to sysbus_realize() etc. with Coccinelle
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus
argument to sysbus_realize(), sysbus_realize_and_unref().

Coccinelle script:

    @@
    expression dev, errp;
    @@
    -    qdev_realize(DEVICE(dev), NULL, errp);
    +    sysbus_realize(SYS_BUS_DEVICE(dev), errp);

    @@
    expression sysbus_dev, dev, errp;
    @@
    +    sysbus_dev = SYS_BUS_DEVICE(dev);
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(sysbus_dev, errp);
    -    sysbus_dev = SYS_BUS_DEVICE(dev);

    @@
    expression sysbus_dev, dev, errp;
    expression expr;
    @@
         sysbus_dev = SYS_BUS_DEVICE(dev);
         ... when != dev = expr;
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(sysbus_dev, errp);

    @@
    expression dev, errp;
    @@
    -    qdev_realize_and_unref(DEVICE(dev), NULL, errp);
    +    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

    @@
    expression dev, errp;
    @@
    -    qdev_realize_and_unref(dev, NULL, errp);
    +    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

Whitespace changes minimized manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-46-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15 22:05:28 +02:00
Markus Armbruster
8352a5b8cc sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 1
The callers of sysbus_init_child_obj() commonly pass either &child,
sizeof(child), or pchild, sizeof(*pchild).  Tidy up the few that use
sizeof(child_type) instead, mostly to keep future commits simpler.

Coccinelle script:

    @@
    expression parent, propname, type;
    type T;
    T child;
    @@
    -    sysbus_init_child_obj(parent, propname, &child, sizeof(T), type)
    +    sysbus_init_child_obj(parent, propname, &child, sizeof(child), type)

    @@
    expression parent, propname, type;
    type T;
    T *child;
    @@
    -    sysbus_init_child_obj(parent, propname, child, sizeof(T), type)
    +    sysbus_init_child_obj(parent, propname, child, sizeof(*child), type)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-42-armbru@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
cd9ae806cd auxbus: Eliminate aux_create_slave()
aux_create_slave() has become a trivial wrapper around qdev_new().
There's just one user.  Eliminate.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-35-armbru@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
2214985408 auxbus: Convert a use of qdev_set_parent_bus()
Convert qdev_set_parent_bus()/qdev_init_nofail() to qdev_realize();
recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains
why.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-34-armbru@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
b7a1b5483e auxbus: New aux_bus_realize(), pairing with aux_bus_init()
aux_bus_init() encapsulates the creation of an aux-bus and its
aux-to-i2c-bridge device.

Create aux_bus_realize() to similarly encapsulate their realization.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-33-armbru@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
dbe4070e59 auxbus: Rename aux_init_bus() to aux_bus_init()
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-32-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-15 22:05:28 +02:00
Markus Armbruster
99ba777e53 qdev: Convert uses of qdev_set_parent_bus() with Coccinelle
In addition to the qdev_create() patterns converted so far, we have a
qdev_set_parent_bus() pattern.  Mostly when we embed a device in a
parent device rather than allocating it on the heap.

This pattern also puts devices in the dangerous "no QOM parent, but
plugged into bus" state I explained in recent commit "qdev: New
qdev_new(), qdev_realize(), etc."

Apply same solution: convert to qdev_realize().  Coccinelle script:

    @@
    expression dev, bus, errp;
    symbol true;
    @@
    -    qdev_set_parent_bus(DEVICE(dev), bus);
         ...
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize(DEVICE(dev), bus, errp);

    @ depends on !(file in "qdev-monitor.c") && !(file in "hw/core/qdev.c")@
    expression dev, bus, errp;
    symbol true;
    @@
    -    qdev_set_parent_bus(dev, bus);
         ...
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize(dev, bus, errp);

    @@
    expression dev, bus;
    symbol true;
    @@
    -    qdev_set_parent_bus(DEVICE(dev), bus);
         ...
    -    qdev_init_nofail(DEVICE(dev));
    +    qdev_realize(DEVICE(dev), bus, &error_fatal);

Unconverted uses of qdev_set_parent_bus() remain.  They'll be
converted later in this series.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-12-armbru@redhat.com>
[Also convert new hw/virtio/vhost-user-vsock-pci.c]
2020-06-15 22:05:08 +02:00
Markus Armbruster
df70796916 qdev: Convert uses of qdev_create() manually
Same transformation as in the previous commit.  Manual, because
convincing Coccinelle to transform these cases is somewhere between
not worthwhile and infeasible (at least for me).

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
2020-06-15 22:05:08 +02:00
Markus Armbruster
3e80f6902c qdev: Convert uses of qdev_create() with Coccinelle
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion.  More to come in
this series.

Coccinelle script:

    @ depends on !(file in "hw/arm/highbank.c")@
    expression bus, type_name, dev, expr;
    @@
    -    dev = qdev_create(bus, type_name);
    +    dev = qdev_new(type_name);
         ... when != dev = expr
    -    qdev_init_nofail(dev);
    +    qdev_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression bus, type_name, dev, expr;
    identifier DOWN;
    @@
    -    dev = DOWN(qdev_create(bus, type_name));
    +    dev = DOWN(qdev_new(type_name));
         ... when != dev = expr
    -    qdev_init_nofail(DEVICE(dev));
    +    qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);

    @@
    expression bus, type_name, expr;
    identifier dev;
    @@
    -    DeviceState *dev = qdev_create(bus, type_name);
    +    DeviceState *dev = qdev_new(type_name);
         ... when != dev = expr
    -    qdev_init_nofail(dev);
    +    qdev_realize_and_unref(dev, bus, &error_fatal);

    @@
    expression bus, type_name, dev, expr, errp;
    symbol true;
    @@
    -    dev = qdev_create(bus, type_name);
    +    dev = qdev_new(type_name);
         ... when != dev = expr
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize_and_unref(dev, bus, errp);

    @@
    expression bus, type_name, expr, errp;
    identifier dev;
    symbol true;
    @@
    -    DeviceState *dev = qdev_create(bus, type_name);
    +    DeviceState *dev = qdev_new(type_name);
         ... when != dev = expr
    -    object_property_set_bool(OBJECT(dev), true, "realized", errp);
    +    qdev_realize_and_unref(dev, bus, errp);

The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name.  Covered by the
next commit's manual conversions.

Missing #include "qapi/error.h" added manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15 22:00:10 +02:00
Markus Armbruster
734a591433 display/sm501 display/ati: Fix to realize "i2c-ddc"
sm501_init() and ati_vga_realize() create an "i2c-ddc" device, but
neglect to realize it.  Affects machines sam460ex, shix, r2d, and
fulong2e.

In theory, a device becomes real only on realize.  In practice, the
transition from unreal to real is a fuzzy one.  The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize).  Depending on
what exactly is done where, a device can work even when we neglect
to realize it.

This one appears to work.  Nevertheless, it's a clear misuse of the
interface.  Even when it works today (more or less by chance), it can
break tomorrow.

Fix by realizing it right away.  Visible in "info qom-tree"; here's
the change for sam460ex:

     /machine (sam460ex-machine)
       [...]
       /unattached (container)
         [...]
    -    /device[14] (sii3112)
    +    /device[14] (i2c-ddc)
    +    /device[15] (sii3112)
         [rest of device[*] renumbered...]

Fixes: 4a1f253adb
Fixes: c82c7336de
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: qemu-ppc@nongnu.org
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200609122339.937862-19-armbru@redhat.com>
2020-06-15 21:36:21 +02:00
Markus Armbruster
f6a1f93d6a display/xlnx_dp: Fix to realize "i2c-ddc" and "aux-to-i2c-bridge"
xlnx_dp_init() creates these two devices, but they're never realized.
Affects machine xlnx-zcu102.

In theory, a device becomes real only on realize.  In practice, the
transition from unreal to real is a fuzzy one.  The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize).  Depending on
what exactly is done where, a device can work even when we neglect to
realize it.

These two appear to work.  Nevertheless, it's a clear misuse of the
interface.  Even when it works today (more or less by chance), it can
break tomorrow.

Fix by realizing them in xlnx_dp_realize().

Fixes: 58ac482a66
Cc: KONRAD Frederic <fred.konrad@greensocs.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200609122339.937862-3-armbru@redhat.com>
2020-06-15 21:36:09 +02:00
Philippe Mathieu-Daudé
ae3887e6f0 hw/display/cirrus_vga: Fix code mis-indentation
While replacing fprintf() by qemu_log_mask() in commit
2b55f4d350, we incorrectly used a 'tab = 4 spaces'
alignment, leading to misindented new code. Fix now.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200529165436.23573-1-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-05 09:17:23 +02:00
Prasad J Pandit
a98610c429 ati-vga: check mm_index before recursive call (CVE-2020-13800)
While accessing VGA registers via ati_mm_read/write routines,
a guest may set 's->regs.mm_index' such that it leads to infinite
recursion. Check mm_index value to avoid such recursion. Log an
error message for wrong values.

Reported-by: Ren Ding <rding@gatech.edu>
Reported-by: Hanqing Zhao <hanqing@gatech.edu>
Reported-by: Yi Ren <c4tren@gmail.com>
Message-id: 20200604090830.33885-1-ppandit@redhat.com
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-05 09:14:40 +02:00
BALATON Zoltan
fa0013a1bc sm501: Remove obsolete changelog and todo comment
Also update copyright year for latest changes

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 1392cad2ad1315a5a50409970e0af061821462e6.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
BALATON Zoltan
fa70c2871f sm501: Optimize small overlapping blits
AmigaOS tends to do a lot of small blits (even 1 pixel). Avoid malloc
overhead by keeping around a buffer for this and only alloc when
blitting larger areas.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 7946852258d528497e85f465327fc90b5c3b59fb.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
BALATON Zoltan
b15a22bbcb sm501: Replace hand written implementation with pixman where possible
Besides being faster this should also prevent malicious guests to
abuse 2D engine to overwrite data or cause a crash.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 58666389b6cae256e4e972a32c05cf8aa51bffc0.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
BALATON Zoltan
3d0b096298 sm501: Clean up local variables in sm501_2d_operation
Make variables local to the block they are used in to make it clearer
which operation they are needed for.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: ae59f8138afe7f6a5a4a82539d0f61496a906b06.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
BALATON Zoltan
2824809b7f sm501: Use BIT(x) macro to shorten constant
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 124bf5de8d7cf503b32b377d0445029a76bfbd49.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
BALATON Zoltan
6f8183b5dc sm501: Shorten long variable names in sm501_2d_operation
This increases readability and cleans up some confusing naming.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: b9b67b94c46e945252a73c77dfd117132c63c4fb.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
BALATON Zoltan
e29da77e5f sm501: Convert printf + abort to qemu_log_mask
Some places already use qemu_log_mask() to log unimplemented features
or errors but some others have printf() then abort(). Convert these to
qemu_log_mask() and avoid aborting to prevent guests to easily cause
denial of service.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 305af87f59d81e92f2aaff09eb8a3603b8baa322.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
b3a7e2416f hw/display/pxa2xx_lcd: Replace printf() call by qemu_log_mask()
Replace printf() calls by qemu_log_mask(UNIMP), which is
disabled by default. This avoid flooding the terminal when
fuzzing the device.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-15-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
00a946a3cb hw/display/omap_dss: Replace fprintf() call by qemu_log_mask(LOG_UNIMP)
Replace fprintf() call by qemu_log_mask(LOG_UNIMP), which is
disabled by default. This avoid flooding the terminal when
fuzzing the device.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-14-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
b3caeaf2c8 hw/display/exynos4210_fimd: Use qemu_log_mask(GUEST_ERROR)
Replace DPRINT_ERROR() by qemu_log_mask(GUEST_ERROR).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-13-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
becce5e90a hw/display/vmware_vga: Let the PCI device own its I/O MemoryRegion
To avoid the orphan I/O memory region being added in the /unattached
QOM container, register the PCI device as its owner.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200526062252.19852-12-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
aa0fd16d00 hw/display/vmware_vga: Replace printf() calls by qemu_log_mask(ERROR)
Avoid flooding stdio by converting printf() calls to
qemu_log_mask(GUEST_ERROR), which are disabled by default.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-11-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
7bbdf0f892 hw/display/xlnx_dp: Replace disabled DPRINTF() by error_report()
DPRINTF() calls are disabled by default, so when unexpected
data is used, the whole process abort without information.

Display a bit of information with error_report() before crashing.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-10-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
eeb1168032 hw/display/dpcd: Convert debug printf()s to trace events
Convert DPRINTF() to trace events and remove ifdef'ry.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-9-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
91e7fd3ae5 hw/display/dpcd: Fix memory region size
The memory region size is 512K.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-8-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
6152772174 hw/display/cirrus_vga: Convert debug printf() to trace event
Convert the final bit of DEBUG_BITBLT to a tracepoint.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-7-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
2b55f4d350 hw/display/cirrus_vga: Use qemu_log_mask(ERROR) instead of debug printf
Replace some debug printf() calls by qemu_log_mask(LOG_GUEST_ERROR).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-6-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
bb6e9e9407 hw/display/cirrus_vga: Use qemu_log_mask(UNIMP) instead of debug printf
Replace some debug printf() calls by qemu_log_mask(LOG_UNIMP),
and add a new one in cirrus_linear_bitblt_read().

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-5-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
bee61ca2b9 hw/display/cirrus_vga: Convert debug printf() to trace event
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-4-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
85664cf0a4 hw/display/cg3: Convert debug printf()s to trace events
Convert DPRINTF() to trace events and remove ifdef'ry.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-3-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-28 11:38:57 +02:00
Philippe Mathieu-Daudé
5a0001ec7e hw/arm/pxa2xx: Replace hw_error() by qemu_log_mask()
hw_error() calls exit(). This a bit overkill when we can log
the accesses as unimplemented or guest error.

When fuzzing the devices, we don't want the whole process to
exit. Replace some hw_error() calls by qemu_log_mask().

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200518140309.5220-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21 22:05:27 +01:00
Gerd Hoffmann
3fcf15df00 ramfb: fix size calculation
size calculation isn't correct with guest-supplied stride, the last
display line isn't accounted for correctly.

For the typical case of stride > linesize (add padding) we error on the
safe side (calculated size is larger than actual size).

With stride < linesize (scanlines overlap) the calculated size is
smaller than the actual size though so our guest memory mapping might
end up being too small.

While being at it also fix ramfb_create_display_surface to use hwaddr
for the parameters.  That way all calculation are done with hwaddr type
and we can't get funny effects from type castings.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-7-kraxel@redhat.com
2020-05-18 15:43:51 +02:00
Gerd Hoffmann
819c83e278 ramfb: add sanity checks to ramfb_create_display_surface
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-6-kraxel@redhat.com
2020-05-18 15:43:51 +02:00
Gerd Hoffmann
19aaee2a65 ramfb: don't update RAMFBState on errors
Store width & height & surface in local variables.  Update RAMFBState
with the new values only in case the ramfb_create_display_surface() call
succeeds.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-5-kraxel@redhat.com
2020-05-18 15:43:35 +02:00
Gerd Hoffmann
46a298d602 ramfb: drop leftover debug message
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-4-kraxel@redhat.com
2020-05-18 15:42:34 +02:00
Gerd Hoffmann
c326eedc75 Revert "hw/display/ramfb: lock guest resolution after it's set"
This reverts commit a9e0cb67b7.

This breaks OVMF.  Reproducer: Just hit 'ESC' at early boot to enter
firmware setup.  OVMF wants switch from (default) 800x600 to 640x480 for
that, and this patch blocks it.

Cc: Hou Qiming <hqm03ster@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-3-kraxel@redhat.com
2020-05-18 15:42:34 +02:00
Gerd Hoffmann
2fc979cb9d Revert "hw/display/ramfb: initialize fw-config space with xres/ yres"
This reverts commit f79081b4b7.

Patch has broken byteorder handling: RAMFBCfg fields are in bigendian
byteorder, the reset function doesn't care so native byteorder is used
instead.  Given this went unnoticed so far the feature is obviously
unused, so just revert the patch.

Cc: Hou Qiming <hqm03ster@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-2-kraxel@redhat.com
2020-05-18 15:42:34 +02:00
Philippe Mathieu-Daudé
63dc3465d6 hw/display: Include local 'framebuffer.h'
The "framebuffer.h" header is not an exported include.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200504082003.16298-2-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-18 15:40:04 +02:00
BALATON Zoltan
b0588cb51d ati-vga: Do not allow unaligned access via index register
According to docs bits 1 and 0 of MM_INDEX are hard coded to 0 so
unaligned access via this register should not be possible.
This also fixes problems reported in bug #1878134.

Buglink: https://bugs.launchpad.net/qemu/+bug/1878134
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Message-id: 20200516132352.39E9374594E@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-18 15:39:59 +02:00
Philippe Mathieu-Daudé
8e5c952b37 hw: Remove unnecessary DEVICE() cast
The DEVICE() macro is defined as:

  #define DEVICE(obj) OBJECT_CHECK(DeviceState, (obj), TYPE_DEVICE)

which expands to:

  ((DeviceState *)object_dynamic_cast_assert((Object *)(obj), (name),
                                             __FILE__, __LINE__,
                                             __func__))

This assertion can only fail when @obj points to something other
than its stated type, i.e. when we're in undefined behavior country.

Remove the unnecessary DEVICE() casts when we already know the
pointer is of DeviceState type.

Patch created mechanically using spatch with this script:

  @@
  typedef DeviceState;
  DeviceState *s;
  @@
  -   DEVICE(s)
  +   s

Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-4-f4bug@amsat.org>
2020-05-15 07:08:52 +02:00
Markus Armbruster
b69c3c21a5 qdev: Unrealize must not fail
Devices may have component devices and buses.

Device realization may fail.  Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).

When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far.  If any of these unrealizes
failed, the device would be left in an inconsistent state.  Must not
happen.

device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.

Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back?  We'd have to
re-realize, which can fail.  This design is fundamentally broken.

device_set_realized() does not roll back at all.  Instead, it keeps
unrealizing, ignoring further errors.

It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.

bus_set_realized() does not roll back either.  Instead, it stops
unrealizing.

Fortunately, no unrealize method can fail, as we'll see below.

To fix the design error, drop parameter @errp from all the unrealize
methods.

Any unrealize method that uses @errp now needs an update.  This leads
us to unrealize() methods that can fail.  Merely passing it to another
unrealize method cannot cause failure, though.  Here are the ones that
do other things with @errp:

* virtio_serial_device_unrealize()

  Fails when qbus_set_hotplug_handler() fails, but still does all the
  other work.  On failure, the device would stay realized with its
  resources completely gone.  Oops.  Can't happen, because
  qbus_set_hotplug_handler() can't actually fail here.  Pass
  &error_abort to qbus_set_hotplug_handler() instead.

* hw/ppc/spapr_drc.c's unrealize()

  Fails when object_property_del() fails, but all the other work is
  already done.  On failure, the device would stay realized with its
  vmstate registration gone.  Oops.  Can't happen, because
  object_property_del() can't actually fail here.  Pass &error_abort
  to object_property_del() instead.

* spapr_phb_unrealize()

  Fails and bails out when remove_drcs() fails, but other work is
  already done.  On failure, the device would stay realized with some
  of its resources gone.  Oops.  remove_drcs() fails only when
  chassis_from_bus()'s object_property_get_uint() fails, and it can't
  here.  Pass &error_abort to remove_drcs() instead.

Therefore, no unrealize method can fail before this patch.

device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool().  Can't drop @errp there, so pass
&error_abort.

We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors.  Pass &error_abort instead.

Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.

One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().

Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-15 07:08:14 +02:00
Markus Armbruster
d2623129a7 qom: Drop parameter @errp of object_property_add() & friends
The only way object_property_add() can fail is when a property with
the same name already exists.  Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.

Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent.  Parentage is
also under program control, so this is a programming error, too.

We have a bit over 500 callers.  Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.

The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.

Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.  ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.

When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.

Drop parameter @errp and assert the preconditions instead.

There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification".  Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
2020-05-15 07:07:58 +02:00
Peter Maydell
a2261b2754 trivial patches (20200504)
Silent static analyzer warning
 Remove dead assignments
 Support -chardev serial on macOS
 Update MAINTAINERS
 Some cosmetic changes
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl6wOI4SHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748p7UQAIFSNN0FrDV+K7i8qqq0X+JrS+dNOHNm
 DSpOf8IaGm/BezzL6XirXBVpFxg9iB5DQVLsjP1kUggO7rbBO0blx5H5eOPhnXZj
 xg60kLN16ty7NZ/WPS1G9jF4nDsjz0ZUtCXb0OXsuGJIOrsmN2r/lxdJwcjHZaqJ
 RzbcCSFXlvL0g7mOakJinMJH5r/nWCiUoEYsikhP10DcvuSBoCnjr+LYV6Ef02G0
 Y5lgKN2G0EAMgWTJaL3gIF27zS8QLDNll+eO+PIU5K4yo75/wRCKr4e3PpErZlf6
 B+hCAAPnXCpDKw+8sK2z+9OZXUGe1hQ8LHNgNNM921C66f+vLLXpIDTAECihM4K4
 0wThYlFDwT4j+PMHFNlzIobGMtb33ui8m40lepMt/YOVFqY4tr8u3MLhHkVDo2+8
 sNuOOWLXAoFOYyRqgTeVJvZvMUFQqtDiftghw1BR55TyIpDWjvLYRqae5CI+MGXs
 6YylZVHGzVjMVptxvivvIQ735Nq8LaKq7N8Cb7uvcbRaCki39BsxXVPZx4p6NdwN
 dMndUOz/y75dNlRMDjK8l/oRFPJa/p1Yz8mZhl0uVOO6JeJhBwYmk+WkQ7g/GHZb
 Rx15HnVWRu6C/Icbw4kqZYyqrgl5lykS8aAWURePdpjzKY77rY1H71FesMhjifRN
 ZGgfUdWI88M4
 =ibgH
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging

trivial patches (20200504)

Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes

# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
  hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
  hw/timer/stm32f2xx_timer: Remove dead assignment
  hw/gpio/aspeed_gpio: Remove dead assignment
  hw/isa/i82378: Remove dead assignment
  hw/ide/sii3112: Remove dead assignment
  hw/input/adb-kbd: Remove dead assignment
  hw/i2c/pm_smbus: Remove dead assignment
  blockdev: Remove dead assignment
  block: Avoid dead assignment
  Compress lines for immediate return
  chardev: Add macOS to list of OSes that support -chardev serial
  MAINTAINERS: Update Keith Busch's email address
  elf_ops: Don't try to g_mapped_file_unref(NULL)
  hw/mem/pc-dimm: Fix line over 80 characters warning
  hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
  MAINTAINERS: Mark the LatticeMico32 target as orphan
  timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
  display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
  scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-05 14:03:28 +01:00
Peter Maydell
5c7c46fea9 Pull request
v2:
  * Fixed stray slirp submodule change [Peter]
 
 Fixes for the lock guard macros, code conversions to the lock guard macros, and
 support for selecting fuzzer targets with argv[0].
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl6wMI8ACgkQnKSrs4Gr
 c8g36Af/fgEhGUVq3S3U+7pupdhFwTJD3oXrayPf/ZlFkACx5vXmV/X7gTMwc7Lw
 nGPEP3Xi+6be3Ca+4eZ6P2J91p1oz6uOmWHajMM9uc9i0yLim+6GsCbUcRDbVZF4
 FRd9dHIqK8I/5yeKSlC1RVdAETPaRTE0XL/kugxOZDlmdhDrD7kpaZmBsCjOEH4E
 +oBEweakkaLwX0yk8zo6tfw4qxsC3wb1gtmQvCE2MdFhASIxdgYzdYXkZnLa+7dy
 fkWLk1F4bRKUyjwoW6EBFGDAGKM5u22tKJOvXwtMOPKMVHm1D36MWau+5oqVMMrs
 JwxHAfPSWJhN1laCykm6ltwo+B9g2w==
 =hRXC
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

v2:
 * Fixed stray slirp submodule change [Peter]

Fixes for the lock guard macros, code conversions to the lock guard macros, and
support for selecting fuzzer targets with argv[0].

# gpg: Signature made Mon 04 May 2020 16:11:11 BST
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  lockable: Replace locks with lock guard macros
  lockable: replaced locks with lock guard macros where appropriate
  lockable: fix __COUNTER__ macro to be referenced properly
  fuzz: select fuzz target using executable name

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04 20:35:59 +01:00
Daniel Brodsky
6e8a355de6 lockable: replaced locks with lock guard macros where appropriate
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end

Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-05-04 16:07:43 +01:00
Anthoine Bourgeois
15138b5e6f virtio-vga: fix virtio-vga bar ordering
With virtio-vga, pci bar are reordered. Bar #2 is used for compatibility
with stdvga. By default, bar #2 is used by virtio modern io bar.
This bar is the last one introduce in the virtio pci bar layout and it's
crushed by the virtio-vga reordering. So virtio-vga and
modern-pio-notify are incompatible because virtio-vga failed to
initialize with this option.

This fix sets the modern io bar to the bar #5 to avoid conflict.

Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Message-Id: <20200422215455.10244-1-anthoine.bourgeois@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-04 10:25:02 -04:00
Simran Singhal
b3ac2b94cd Compress lines for immediate return
Compress two lines into a single line if immediate return statement is found.

It also remove variables progress, val, data, ret and sock
as they are no longer needed.

Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('

Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@

-ret =
+return
     e;
-return ret;

Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-04 14:43:22 +02:00
Chen Qun
fd1c220395 display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
Clang static code analyzer show warning:
  hw/display/blizzard.c:940:9: warning: Value stored to 'data' is never read
        data >>= 5;
        ^        ~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200325025919.21316-3-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-04 11:17:27 +02:00
Markus Armbruster
ee29f6e92d bochs-display: Fix vgamem=SIZE error handling
bochs_display_realize() rejects out-of-range vgamem.  The error
handling is broken:

    $ qemu-system-x86_64 -S -display none -monitor stdio
    QEMU 4.2.93 monitor - type 'help' for more information
    (qemu) device_add bochs-display,vgamem=1
    Error: bochs-display: video memory too small
    (qemu) device_add bochs-display,vgamem=1
    RAMBlock "0000:00:04.0/bochs-display-vram" already registered, abort!
    Aborted (core dumped)

Cause: bochs_display_realize() neglects to bail out after setting the
error.  Fix that.

Fixes: 765c942908
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200422130719.28225-8-armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2020-04-29 08:01:52 +02:00
BALATON Zoltan
ac2071c379 ati-vga: Fix checks in ati_2d_blt() to avoid crash
In some corner cases (that never happen during normal operation but a
malicious guest could program wrong values) pixman functions were
called with parameters that result in a crash. Fix this and add more
checks to disallow such cases.

Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20200406204029.19559747D5D@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-04-07 09:25:23 +02:00
Philippe Mathieu-Daudé
6111a0c0ed hw/arm/bcm283x: Correct the license text
The license is the 'GNU General Public License v2.0 or later',
not 'and':

  This program is free software; you can redistribute it and/ori
  modify it under the terms of the GNU General Public License as
  published by the Free Software Foundation; either version 2 of
  the License, or (at your option) any later version.

Fix the license comment.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200312213455.15854-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-23 17:22:30 +00:00
Philippe Mathieu-Daudé
b9fc4f6e62 hw/display: Let devices own the MemoryRegion they create
Avoid orphan memory regions being added in the /unattached QOM
container.

This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-17 15:18:48 +01:00
Philippe Mathieu-Daudé
52013bcea0 hw/display: Use memory_region_init_rom() with read-only regions
This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-17 15:18:46 +01:00
Gerd Hoffmann
f872c76296 stdvga+bochs-display: add dummy mmio handler
The bochs-display mmio bar has some sub-regions with the actual hardware
registers.  What happens when the guest access something outside those
regions depends on the archirecture.  On x86 those reads succeed (and
return 0xff I think).  On risc-v qemu aborts.

This patch adds handlers for the parent region, to make the wanted
behavior explicit and to make things consistent across architectures.

v2:
 - use existing unassigned_io_ops.
 - also cover stdvga.

Cc: Alistair Francis <alistair23@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200309100009.17624-1-kraxel@redhat.com
2020-03-16 12:40:47 +01:00
Chen Qun
488a0ddae2 display/exynos4210_fimd: Remove redundant statement in exynos4210_fimd_update()
Clang static code analyzer show warning:
hw/display/exynos4210_fimd.c:1313:17: warning: Value stored to 'is_dirty' is never read
                is_dirty = false;

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200302130715.29440-9-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-09 15:59:31 +01:00
Chen Qun
4e34d82eee display/pxa2xx_lcd: Remove redundant statement in pxa2xx_palette_parse()
Clang static code analyzer show warning:
hw/display/pxa2xx_lcd.c:596:9: warning: Value stored to 'format' is never read
        format = 0;
        ^        ~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200302130715.29440-8-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-09 15:59:31 +01:00
Gerd Hoffmann
44b5c1ebfa qxl: map rom r/o
Map qxl rom read-only into the guest, so the guest can't tamper with the
content.  qxl has a shadow copy of the rom to deal with that, but the
shadow doesn't cover the mode list.  A privilidged user in the guest can
manipulate the mode list and that to trick qemu into oob reads, leading
to a DoS via segfault if that read access happens to hit unmapped memory.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200225055920.17261-2-kraxel@redhat.com
2020-03-02 08:24:36 +01:00
Anton V. Boyarshinov
cd8fef8d4b Arithmetic error in EDID generation fixed
To calculate screen size in centimeters we should calculate:
pixels/dpi*2.54
but not
pixels*dpi/2540

Using wrong formula we actually get 65 DPI and very small fonts.

Signed-off-by: Anton V. Boyarshinov <boyarsh@altlinux.org>
Message-id: 20200226122054.366b9cda@table.localdomain
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-03-02 08:20:30 +01:00
Paolo Bonzini
9e264985ff Merge branch 'exec_rw_const_v4' of https://github.com/philmd/qemu into HEAD 2020-02-25 13:41:48 +01:00
Peter Maydell
7afee874f1 Fix memory leak with fdt
cosmetic change in code and logs
 update mailmap
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl5NCtwSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748GMMQAIX/UNIKHIIYUYM/5mrBQjQzk/OTZ0F8
 7GqsYkOJ3U189iZsbMTCkCo3uQjP1+qKBRGhEq/hWozItTpvKwwfg6V5e8/8UUYn
 CREUZVBnSj2GcBHCSyK0+h6carG/ThuRc5m6QFPG4OMKDR6FTbvleeUTWhgPAJ3t
 /jhIj9+MlKYFJ9VmMRYs47ZMGoX0KDX1m9L6fx7pllwHM3DbFF5L1GieHrdnnDYu
 7az+KZsFkvIu2yuyonzIApitriRjPmb5DM2udxRoX2ZxhkZU0OARzQVxfx+rsilJ
 puuD1mc8PwQTbdAFi0y/5IvL7OkX7lV09cxnBk4wLoxKsJFn+2F0YN+iMVkcY+B3
 BKr2uwikvolb5BQgfpZg7bJboHABuHy+PGBiX3EC/F93k11bIIF/XM2bEz/Kwt3K
 cY7DLDxEQfEcyuHeFdmT23qE0xyrQytkgIU6Vefp2YuOvpeNNVC7KNnrnIfo32dt
 TvoRFCoW2s3ALevoBHBHmbbZzFGjvBV2377kiA8yDTb0aHsnzXeptVYojFVG76Td
 qpy6e/OWnhh08FB4HTTeWx2VlHMUjC6XiYsbcxvMcmKLd5gNh+fQ5HNYKXseyJ7J
 I0AYCH6l9lYKFp0/NxzW6m8bPso9m5IxltPy+5Y6HaXjGg6RJgwx2aM/U+GYkrY6
 2oN84MPK/PZT
 =HsOM
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

Fix memory leak with fdt
cosmetic change in code and logs
update mailmap

# gpg: Signature made Wed 19 Feb 2020 10:15:56 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  hw/xtensa/xtfpga:fix leak of fdevice tree blob
  hw/nios2:fix leak of fdevice tree blob
  hw/net/rocker: Report unimplemented feature with qemu_log_mask(UNIMP)
  hw/block/pflash_cfi02: Remove unneeded variable assignment
  hw/display/qxl: Remove unneeded variable assignment
  contrib/rdmacm-mux: Remove superfluous semicolon
  tests/qtest/libqos/qgraph: Remove superfluous semicolons
  target/i386/whpx: Remove superfluous semicolon
  ui/input-barrier: Remove superfluous semicolon
  hw/vfio/display: Remove superfluous semicolon
  hw/scsi/esp: Remove superfluous semicolon
  hw/m68k/next-cube: Remove superfluous semicolon
  hw/arm/xlnx-versal: Remove superfluous semicolon
  audio/alsaaudio: Remove superfluous semicolons
  scripts/checkpatch.pl: Detect superfluous semicolon in C code
  Report stringified errno in VFIO related errors
  mailmap: Add entry for Yu-Chen Lin

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-20 16:51:19 +00:00
Philippe Mathieu-Daudé
85eb7c18ee Let cpu_[physical]_memory() calls pass a boolean 'is_write' argument
Use an explicit boolean type.

This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-20 14:47:08 +01:00
Philippe Mathieu-Daudé
0eeef0a4d3 Remove unnecessary cast when using the cpu_[physical]_memory API
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.

Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-20 14:47:08 +01:00
Philippe Mathieu-Daudé
eb9b2ee8f6 hw/display/artist: Remove dead code (CID 1419388 & 1419389)
Coverity reports:

  *** CID 1419388:  Control flow issues  (DEADCODE)
  /hw/display/artist.c: 739 in draw_line_xy()
  733         if (endy < 0) {
  734             endy = 0;
  735         }
  736
  737
  738         if (endx < 0) {
  >>>     CID 1419388:  Control flow issues  (DEADCODE)
  >>>     Execution cannot reach this statement: "return;".
  739             return;
  740         }
  741
  742         if (endy < 0) {
  743             return;
  744         }

  *** CID 1419389:  Control flow issues  (DEADCODE)
  /hw/display/artist.c: 743 in draw_line_xy()
  737
  738         if (endx < 0) {
  739             return;
  740         }
  741
  742         if (endy < 0) {
  >>>     CID 1419389:  Control flow issues  (DEADCODE)
  >>>     Execution cannot reach this statement: "return;".
  743             return;
  744         }
  745
  746         trace_artist_draw_line(startx, starty, endx, endy);
  747         draw_line(s, startx, starty, endx, endy, false, -1, -1);
  748     }

Fixes: Covertiy CID 1419388 and 1419389 (commit 4765384ce3)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-18 11:21:47 -08:00
Philippe Mathieu-Daudé
b0f6455fea hw/display/artist: Avoid drawing line when nothing to display
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200214001303.12873-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-18 11:21:47 -08:00
Philippe Mathieu-Daudé
0814343ce2 hw/display/artist: Delay some variables initialization
We want to have an early exit path. Delay some initializations
before the variables are used.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-18 11:21:47 -08:00
Philippe Mathieu-Daudé
6c69f9c48e hw/display/artist: Remove pointless initialization
We are initializating incy inconditionally:

    if (y1 <= y2) {
        incy = 1;
    } else {
        incy = -1;
    }

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-18 11:21:47 -08:00
Philippe Mathieu-Daudé
5646bca36e hw/display/artist: Move trace event to draw_line()
Instead of emitting the trace event before each call to
draw_line(), call it once at draw_line() entrance.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-18 11:21:47 -08:00
Philippe Mathieu-Daudé
380e6d8119 hw/display/qxl: Remove unneeded variable assignment
Fix warning reported by Clang static code analyzer:

  hw/display/qxl.c:1634:14: warning: Value stored to 'orig_io_port' during its initialization is never read
      uint32_t orig_io_port = io_port;
               ^~~~~~~~~~~~   ~~~~~~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200215161557.4077-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-18 20:20:49 +01:00
Gerd Hoffmann
ed71c09ffd qxl: introduce hardware revision 5
The only difference to hardware revision 4 is that the device doesn't
switch to VGA mode in case someone happens to touch a VGA register,
which should make things more robust in configurations with multiple
vga devices.

Swtiching back to VGA mode happens on reset, either full machine
reset or qxl device reset (QXL_IO_RESET ioport command).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20200206074358.4274-1-kraxel@redhat.com
2020-02-13 08:31:40 +01:00
Thomas Huth
3ab5a6ece5 hw/*/Makefile.objs: Move many .o files to common-objs
We have many files that apparently do not depend on the target CPU
configuration, i.e. which can be put into common-obj-y instead of
obj-y. This way, the code can be shared for example between
qemu-system-arm and qemu-system-aarch64, or the various big and
little endian variants like qemu-system-sh4 and qemu-system-sh4eb,
so that we do not have to compile the code multiple times anymore.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200130133841.10779-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-02-04 09:00:57 +01:00
Peter Maydell
d4aceb2eb7 hw/display/qxl.c: Use trace_event_get_state_backends()
The preferred way to test whether a trace event is enabled is to
use trace_event_get_state_backends(), because this will give the
correct answer (allowing expensive computations to be skipped)
whether the trace event is compile-time or run-time disabled.
Convert the old-style direct use of TRACE_FOO_ENABLED.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200120151142.18954-4-peter.maydell@linaro.org
Message-Id: <20200120151142.18954-4-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-01-30 21:33:50 +00:00
Sven Schnelle
4765384ce3 hppa: Add emulation of Artist graphics
This adds emulation of Artist graphics good enough to get a text
console on both Linux and HP-UX. The X11 server from HP-UX also works.

Adjust boot-serial-test to disable graphics, so that SeaBIOS outputs
to the serial port, as expected by the test.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-6-svens@stackframe.org>
[rth: Merge Helge's test for machine->enable_graphics]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-27 10:49:51 -08:00
Marc-André Lureau
4f67d30b5e qdev: set properties with device_class_set_props()
The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macro-file scripts/cocci-macro-file.h  --sp-file
./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place
--dir .

@@
typedef DeviceClass;
DeviceClass *d;
expression val;
@@
- d->props = val
+ device_class_set_props(d, val)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:15 +01:00
Philippe Mathieu-Daudé
ada4406516 hw/display/tcx: Add missing fall through comments
When building with GCC9 using CFLAG -Wimplicit-fallthrough=2 we get:

  hw/display/tcx.c: In function ‘tcx_dac_writel’:
  hw/display/tcx.c:453:26: error: this statement may fall through [-Werror=implicit-fallthrough=]
    453 |             s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
        |             ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
  hw/display/tcx.c:454:9: note: here
    454 |         default:
        |         ^~~~~~~
  hw/display/tcx.c: In function ‘tcx_dac_readl’:
  hw/display/tcx.c:412:22: error: this statement may fall through [-Werror=implicit-fallthrough=]
    412 |         s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
        |         ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
  hw/display/tcx.c:413:5: note: here
    413 |     default:
        |     ^~~~~~~
  cc1: all warnings being treated as errors

Give a hint to GCC by adding the missing fall through comments.

Fixes: 55d7bfe22
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20191218192526.13845-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:07 +01:00
Peter Xu
1df2c9a26f migration: Define VMSTATE_INSTANCE_ID_ANY
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID.  Previously it was hard coded
as -1 instead of this macro.  It helps to change this default value in
the follow up patches.  No functional change.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20 09:10:23 +01:00
Marc-André Lureau
0ed40f16a1 sm501: make SerialMM a child, export chardev property
Embed the SerialMM sybus device, and re-export its "chardev" property.
That way, we can get rid of PROP_PTR "chr-state" and better track
devices relationship.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07 17:24:29 +04:00
Philippe Mathieu-Daudé
7aca3782d9 hw/display/sm501: Always map the UART0
The SM501 is a Mobile Multimedia Companion Chip with 2 UARTs.
This model only implements the first UART. Being part of the
chipset, the UART block is always mapped in memory, regardless
of whether we provide a chardev backend.

Since commit 12051d82f, qemu_chr_fe_init() accepts a NULL chardev.
Let's remove the chardev check and always map the UART in the
chipset memory.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191122133623.13004-1-philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07 16:06:59 +04:00
Peter Maydell
81e6a7345a console: screendump improvements
Hi,
 
 The following patches have been extracted from the "[PATCH v6 00/25]
 monitor: add asynchronous command type", as they are
 reviewable/mergeable independantly.
 
 They introduce some internal API changes, and fix
 qemu_open()/qemu_close()/unlink() misusages which should be quite
 harmless.
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAl4PBGccHG1hcmNhbmRy
 ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5XtXD/4rqC3qSO62L2vYzi7V
 38unjXNMAETqr/dplFuMKapqjZZaRP+yjx2/u3xcXvixLrzlbNOy9vwNy0T0fkRw
 og8bZM8vOgMP8jCfXFEysAsXmTtiJ2tOKlKURedqQLLP4JNz4vEXkmtP4OAidjcR
 AoNEg6uqVQJpidNhN+3+w3SNYlsL4JpXYy8iZ2PPCnlvLBkRc7EFWVvwWvCdpCgL
 a1pMamqbbnxNIwxVe232gpXAbKXzmGCRIvwB7ZIV+USTF3IUH06bIGH4WPFAsD2w
 7wxOxV7G4z16aYmoMHwLP9RyUqb8K4Cb00qOf8jEF04tVAFwCp1czfOYQ6lrO0Qc
 1RU6OaFsHUlVUxu0OHBfIz5tXmwtG97tlN8Oglu8ujqSkhbH0u3uythaid23UEfg
 dF+jqXF1Ex93KkSoqVnT76UqJchdZU+BXYJt3Ir+X6nro3FvAwQB2c4KFAlVOo1w
 trc3NqWNZvxZ6N1LI8cG15d0EfdKG8rL5p49MtgfUNZk5XNqAul+huFr2UAEFykC
 +pnmTIYlc1mrZUZXX6h5Cokj65zYIEYuqK/2ZS6uUC8oWvH8aMo1b5kPxqrvisCl
 TWmXnh5j9k+hhj5d/X7TnR9TGJQiljj4zvfUrYTIG6hKAoEbZIocaPjtNSaflF2P
 3SVhe4g7QkQSJhdq6dpDfHUEPA==
 =aSgS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/elmarco/tags/screendump-pull-request' into staging

console: screendump improvements

Hi,

The following patches have been extracted from the "[PATCH v6 00/25]
monitor: add asynchronous command type", as they are
reviewable/mergeable independantly.

They introduce some internal API changes, and fix
qemu_open()/qemu_close()/unlink() misusages which should be quite
harmless.

# gpg: Signature made Fri 03 Jan 2020 09:07:51 GMT
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* remotes/elmarco/tags/screendump-pull-request:
  screendump: use qemu_unlink()
  osdep: add qemu_unlink()
  screendump: replace FILE with QIOChannel and fix close()/qemu_close()
  object: add g_autoptr support
  ui: add pixman image g_autoptr support
  ppm-save: pass opened fd
  console: add graphic_hw_update_done()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-06 14:51:51 +00:00
Peter Maydell
4affd48bfe vga: two little bugfixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJd/GTMAAoJEEy22O7T6HE4n1gP/iVAD4R03r683m9TE1FO+gTx
 qDKeDVgCrWcoMhJZ6VfwH/32Uf31yGiRJvUY5K9MqaR7CKmmiRQrz7Kas7A7M2Qz
 MKLQHr1ylgppBDUfEMdNOf+Wc8oC7ydUPtDH5rBP4i4tUPkSCQoxVeCLLHF1FANg
 L+WN3Oj1eMYdWzFSxQ5TokbSZMvgAaNtLqltz9pCxAISDp1iz5DYWEHCHtXVtnmg
 2w5hg+t3E4wtS1In+8QTwWwvk7Q/5RgjwbGeGhTmNr+YW07eJ1puTwNsoLRb04hK
 Y2IUcZ6fyZsWpCaUceAeqSdN/It0S+Kffsr9HyHh2rIEAUowFbwjZonTMHKE0cLP
 GdfGfUmRd0DPtcZKBEDwOHh8rL2w/MJN5+mC//lZXC4CpgYbFm0KK0SHcncqnbjW
 3D217zMM5gOD2gwNEq5bYlUSmCYYBwBV6DahC38QoYLW1hDR+ZN3/GDLkActD4qt
 g57eMw4ooPTMNF3XDsjWudTUOSSyJYbBM9nOOiO7vq+gy4HY/hnkxrs20XQsuxjP
 estF360PWX3BuFu6tLqZiWueKgZIcLkzlcNWR65LYv195WhLnGdOxuHcWeyHMkTH
 xe8KmCGqwvrQyWyF4GZCvI3+vuRcCKFOUHMgnOx5+3irsgvFtmNNI7GPOj/P+V8S
 Ba9DKC3TiAb2CJQ8Z9ob
 =+HfT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20191220-pull-request' into staging

vga: two little bugfixes.

# gpg: Signature made Fri 20 Dec 2019 06:06:04 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20191220-pull-request:
  display/bochs-display: fix memory leak
  vhost-user-gpu: Drop trailing json comma

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-03 14:29:42 +00:00
Marc-André Lureau
4d6316218b console: add graphic_hw_update_done()
Add a function to be called when a graphic update is done.

Declare the QXL renderer as async: render_update_cookie_num counts the
number of outstanding updates, and graphic_hw_update_done() is called
when it reaches none.

(note: this is preliminary work for asynchronous screendump support)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-02 13:54:57 +04:00
Cameron Esfahani
0d82411d0e display/bochs-display: fix memory leak
Fix memory leak in bochs_display_update().  Leaks 304 bytes per frame.

Fixes: 33ebad5405
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-Id: <d6c26e68db134c7b0c7ce8b61596ca2e65e01e12.1576013209.git.dirty@apple.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-12-20 07:05:46 +01:00
Paolo Bonzini
e2328a11bd vga: cleanup mapping of VRAM for non-PCI VGA
vga_init_vbe is now used only from ISA VGA cards.  Since the alias is
not needed anymore, remove it (effectively reverting commit 8294a64d7f,
"vga: fix vram double-mapping with -vga std and -M pc-0.12", 2012-05-29)
and the now unused vbe_mapped field of VGACommonState.  The function now
consists of a single memory_region_add_subregion call, so we can inline
it; this avoids incorrect usage from PCI cards.

Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Based-on: <05af415a-5058-98b4-4a12-9d093a30b1e3@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-18 02:34:13 +01:00
Thomas Huth
97d8381543 hw/display: Remove "rombar" hack from vga-pci and vmware_vga
Now that the old pc-0.x machine types have been removed, we do not need
the old "rombar" hacks anymore.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191209125248.5849-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-18 02:34:12 +01:00
Filip Bozuta
68fa5f552a mips: jazz: Renovate coding style
The script checkpatch.pl located in scripts folder was
used to detect all errors and warrnings in files:
    hw/mips/mips_jazz.c
    hw/display/jazz_led.c
    hw/dma/rc4030.c

All these mips jazz machine files were edited and
all the errors and warrings generated by the checkpatch.pl
script were corrected and then the script was
ran again to make sure there are no more errors and warnings.

Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1575640687-20744-2-git-send-email-Filip.Bozuta@rt-rk.com>
2019-12-16 13:04:46 +01:00
Sai Pavan Boddu
0f6ed883e7 display: xlnx_dp: Provide sufficient bytes for silent audio channel
Fill the audio channel with required number of bytes to cover the
elapsed time. This prevents rate control reset, and avoids debug prints
like below

log:
	Resetting rate control (65692 samples)
	...
	Resetting rate control (65721 samples)
	...

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1573833408-2388-1-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-11-21 07:12:28 +01:00
Laurent Vivier
8ac919a065 hw/m68k: add Nubus macfb video card
This patch adds support for a graphic framebuffer device.
This device can be added as a sysbus device or as a NuBus device.

It is accessed as a framebuffer but the color palette can be set.

Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-9-laurent@vivier.eu>
2019-10-28 19:06:49 +01:00
Philippe Mathieu-Daudé
e55a8b3790 hw/arm/bcm2835_peripherals: Name various address spaces
Various address spaces from the BCM2835 are reported as
'anonymous' in memory tree:

  (qemu) info mtree

  address-space: anonymous
    0000000000000000-000000000000008f (prio 0, i/o): bcm2835-mbox
      0000000000000010-000000000000001f (prio 0, i/o): bcm2835-fb
      0000000000000080-000000000000008f (prio 0, i/o): bcm2835-property

  address-space: anonymous
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

  [...]

Since the address_space_init() function takes a 'name' argument,
set it to correctly describe each address space:

  (qemu) info mtree

  address-space: bcm2835-mbox-memory
    0000000000000000-000000000000008f (prio 0, i/o): bcm2835-mbox
      0000000000000010-000000000000001f (prio 0, i/o): bcm2835-fb
      0000000000000080-000000000000008f (prio 0, i/o): bcm2835-property

  address-space: bcm2835-fb-memory
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

  address-space: bcm2835-property-memory
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

  address-space: bcm2835-dma-memory
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20190926173428.10713-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15 18:09:05 +01:00
Gerd Hoffmann
aab0e2a661 ati: use vga_read_byte in ati_cursor_define
This makes sure reads are confined to vga video memory.

v3: use uint32_t, fix cut+paste bug.
v2: fix ati_cursor_draw_line too.

Reported-by: xu hang <flier_m@outlook.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190917111441.27405-3-kraxel@redhat.com
2019-09-19 10:37:46 +02:00
Gerd Hoffmann
145e543eb3 vga: move access helpers to separate include file
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190917111441.27405-2-kraxel@redhat.com
2019-09-19 10:37:46 +02:00
Thomas Huth
e3355a0ca2 m68k: Add NeXTcube framebuffer device emulation
The NeXTcube uses a linear framebuffer with 4 greyscale colors and
a fixed resolution of 1120 * 832.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at

 https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c

and altered to fit the latest interface of the current QEMU (e.g.
the device has been "qdev"-ified etc.).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-2-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2019-09-07 08:30:34 +02:00
Peter Maydell
e1391340c7 vga: a collection of ati fixes/improvements.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJdXkykAAoJEEy22O7T6HE4ov4P/2c6oOaDWoD1nPHpVCh8ygQi
 XttAd46/WObe9UG2mqA5Ds91e5cbqilgvAXCfDO9OsmoceEdLwrsbrJf+98Em92t
 Fn+6v8ywGo6YUdvqzvYFBEMQjtd8lVFEnUf3DXrf4OkMkuhJ3FVwTvhrDXr+6MJZ
 4nDj2cSltXvjU9Z+e/7T0chGkqOPkPTg84wMhYyjAFzjOdxSmkeOe5RTRHgaMD/t
 96oQi/tOdk60g/DxZSGA1Hqm2kNbzpi5ZFCuvFPum3rJRpErt/BcxCPNYAOAbbq0
 bjcF1gmAW2RVDtqJyQHiYhm6AAc0FPuFh4otJIgG9HXSevOOq3ijQRZP7xGVhpRF
 Xy2TuWxLuxz298W59/pYcJWPiNpGBCgWeejB10B7KwTegpe51boDLzmqFTN1TOVa
 sgKPr6QUu0BJHwgCxI/Jm79TkBHO54gVXGWE1SNUCxjMpR4VxcvKUM8pzE7pRT7B
 Q6fdqKG+WTeEsWv7aa9kHTWAf9lbsb2zL+9EOgD/tz5s0uUuU/HBIkk0JFC+h+7r
 eZxD49EtOSjteikkE4qqP0iPgH+DOCEASJRFjEe9JoilXWxmhaJw3e4x3V8ey1AK
 Xrro5VOmC+czjCi/gDnx3REB7kwkwEJnBLCGSgCruSPYgEvCA4BSMVtCwNhOEUx1
 lU4IqcpArtrw0B+ci3c2
 =xT8w
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190822-pull-request' into staging

vga: a collection of ati fixes/improvements.

# gpg: Signature made Thu 22 Aug 2019 09:04:52 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190822-pull-request:
  ati-vga: Implement dummy VBlank IRQ
  ati-vga: Add limited support for big endian frame buffer aperture
  ati-vga: Attempt to handle CRTC offset not exact multiple of stride
  ati-vga: Fix hardware cursor image offset
  ati-vga: Fix cursor color with guest_hwcursor=true
  ati-vga: Fix GPIO_MONID register write
  ati-vga: Add some register definitions for debugging
  ati-vga: Add registers for getting apertures

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-22 16:13:17 +01:00
BALATON Zoltan
b7105d280c ati-vga: Implement dummy VBlank IRQ
The MacOS driver exits if the card does not have an interrupt. If we
set PCI_INTERRUPT_PIN to 1 then it enables VBlank interrupts and it
boots but the mouse pointer cannot be moved. This patch implements a
dummy VBlank interrupt triggered by a 60 Hz timer. With this the
pointer now moves but MacOS still hangs somewhere before completely
finishing boot.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <89364275f2fb5f85ee73c0e76528aa91691a499a.1565907489.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-22 10:04:20 +02:00
Philippe Mathieu-Daudé
8a9224a250 hw/display: Compile various display devices as common object
Various display devices are not target-specific and can
be compiled once for all the targets.
After this commit, the 'make world' target is reduced by
54 objects

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190812113739.16587-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-21 13:17:22 +02:00
Philippe Mathieu-Daudé
ea2b7c9faa hw/display/sm501: Remove unused include
The "cpu.h" include makes devices target-specific. Since it
is not used, remove it, so the device become generic (we can
now compile it once for all targets).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190812113739.16587-2-philmd@redhat.com>
[lv: fix conflict with 650d103d3e
     ("Include hw/hw.h exactly where needed")]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-21 11:05:40 +02:00
BALATON Zoltan
8bb9a2b26d ati-vga: Add limited support for big endian frame buffer aperture
Set frame buffer endianness according to requested endianness for
frame buffer apertures. We set frame buffer to big endian if any of
the two apertures are set to big endian. Using different endianness
for the two apertures is not implemented. This fixes inverted colors
with MacOS and Xorg frame buffer driver but some Linux drivers may
have endianness issues even on real hardware so this may not fix all
cases. MorphOS uses aper0 in LE, Linux uses aper0 in BE and MacOS uses
aper1 in BE but not sure about others or if MacOS also may need aper0
in which case we'll need a more complex fix but MacOS has other
problems yet so for now this might work.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e2a7ec7af3fc30523213bcd27832ccad34323f2c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
c026350a84 ati-vga: Attempt to handle CRTC offset not exact multiple of stride
MacOS uses non-0 offset so it needs this and the resulting
vbe_start_addr seems correct but picture is still broken with OpenBIOS
after FCode runs but that maybe due to firmware problems now. After
boot, picture is now correct.

It also occured to me that these CRTC regs are also present in VGA so
I wonder if they should be shared in case some drivers try to poke
them via VGA regs or these are a separate set of regs for extended
mode. Added a comment noting this but drivers I've tried so far
program the card accessing ati regs so I did not attempt to change it.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 1c6fce457ef7e6f889e38dc0423791be92310a62.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
747d7ad231 ati-vga: Fix hardware cursor image offset
The crtc_offset is not needed, cur_offset is relative to the start of
vram not the start of displayed area. This fixes broken pointer image
with MacOS that uses non-0 crtc_offset.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e6acb1fa3ca980dc948045443e5986e2aa79bf7c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
50bc6af55e ati-vga: Fix cursor color with guest_hwcursor=true
Fixes: a38127414b
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: d99f9e07923a74932dbb15e93dd50aa8d2816b19.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
006388a8c7 ati-vga: Fix GPIO_MONID register write
Also update bitbang_i2c state when output bits are changed while
enable bits are set. This fixes EDID access by the ATI FCode ROM.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 292e70a92b7fbfd9a4120d433dbdcfda4e5f6c3c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
df1e4cf4e7 ati-vga: Add some register definitions for debugging
Add names for AMCGPIO regs to make it easier to identify these in
trace output. This is where rage128p has the DDC from the DVI port
among others but because we don't implement the flat panel controller
we don't want to connect an EDID here to make sure drivers use the VGA
output instead. But since these are often probed by drivers it helps
to see what happens by logging these registers by name.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 31ff69ca6959d090869907774faa1af7d2c02b2b.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
1d8d4d866c ati-vga: Add registers for getting apertures
Some drivers (e.g. Linux radeon drm and MacOS) access these to find
apertures to access card. Try to implement these but not sure these
are correct yet.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: b2df13655feecd63c0049ec45fd87d1026f67091.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
Markus Armbruster
54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster
2f780b6a91 sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).

Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry.  Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there.  Drop the now
superfluous includes of sysemu/sysemu.h from headers.

Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
46517dd497 Include sysemu/sysemu.h a lot less
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a
"qdev: add qdev_add_vm_change_state_handler()".  This is a bad idea:
hw/qdev-core.h is widely included.

Move the declaration of qdev_add_vm_change_state_handler() to
sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h.

Touching sysemu/sysemu.h now recompiles some 1800 objects.
qemu/uuid.h also drops from 5400 to 1800.  A few more headers show
smaller improvement: qemu/notify.h drops from 5600 to 5200,
qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from
5500 to 5000.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-28-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00
Markus Armbruster
d5938f29fe Clean up inclusion of sysemu/sysemu.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Almost a third of its inclusions are actually superfluous.  Delete
them.  Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.

hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it.  The compiler is cool with that, but include it anyway.

This doesn't reduce actual use much, as it's still included into
widely included headers.  The next commit will tackle that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00
Markus Armbruster
a27bd6c779 Include hw/qdev-properties.h less
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h.  Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
d484205210 Include exec/memory.h slightly less
Drop unnecessary inclusions from headers.  Downgrade a few more to
exec/hwaddr.h.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-17-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
d645427057 Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get VMStateDescription.  The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed.  Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
64552b6be4 Include hw/irq.h a lot less
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.

Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed.  Touching it now recompiles only some 500 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
ca77ee28e0 Include migration/qemu-file-types.h a lot less
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).

The culprit is again hw/hw.h, which supposedly includes it for
convenience.

Include migration/qemu-file-types.h only where it's needed.  Touching
it now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
71e8a91585 Include sysemu/reset.h a lot less
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

The main culprit is hw/hw.h, which supposedly includes it for
convenience.

Include sysemu/reset.h only where it's needed.  Touching it now
recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
1b53ecd909 memory: Fix type of IOMMUMemoryRegionClass member @parent_class
TYPE_IOMMU_MEMORY_REGION is a direct subtype of TYPE_MEMORY_REGION.
Its instance struct is IOMMUMemoryRegion, and its first member is a
MemoryRegion.  Correct.  Its class struct is IOMMUMemoryRegionClass,
and its first member is a DeviceClass.  Wrong.  Messed up when commit
1221a47467 introduced the QOM type.  It even included hw/qdev-core.h
just for that.

TYPE_MEMORY_REGION doesn't bother to define a class struct.  This is
fine, it simply defaults to its super-type TYPE_OBJECT's class struct
ObjectClass.  Changing IOMMUMemoryRegionClass's first member's type to
ObjectClass would be a minimal fix, if a bit brittle: if
TYPE_MEMORY_REGION ever acquired own class struct, we'd have to update
IOMMUMemoryRegionClass to use it.

Fix it the clean and robust way instead: give TYPE_MEMORY_REGION its
own class struct MemoryRegionClass now, and use it for
IOMMUMemoryRegionClass's first member.

Revert the include of hw/qdev-core.h, and fix the few files that have
come to rely on it.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190812052359.30071-5-armbru@redhat.com>
2019-08-16 13:31:51 +02:00
Gerd Hoffmann
5e7bcdcfe6 display/bochs: fix pcie support
Set QEMU_PCI_CAP_EXPRESS unconditionally in init(), then clear it in
realize() in case the device is not connected to a PCIe bus.

This makes sure the pci config space allocation is big enough, so
accessing the PCIe extended config space doesn't overflow the pci
config space buffer.

PCI(e) config space is guest writable.  Writes are limited by
write mask (which probably is also filled with random stuff),
so the guest can only flip enabled bits.  But I suspect it
still might be exploitable, so rather serious because it might
be a host escape for the guest.  On the other hand the device
is probably not yet in widespread use.

(For a QEMU version without this commit, a mitigation for the
bug is available: use "-device bochs-display" as a conventional pci
device only.)

Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190812065221.20907-2-kraxel@redhat.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-12 16:36:41 +01:00
Dr. David Alan Gilbert
dd56040d29 Revert "hw: report invalid disable-legacy|modern usage for virtio-1-only devs"
This reverts commit f2784eed30
since that accidentally removes the PCIe capabilities from virtio
devices because virtio_pci_dc_realize is called before the new 'mode'
flag is set.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190729162903.4489-3-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-07-29 16:57:27 -04:00
Philippe Mathieu-Daudé
a09ef50404 hw/display/xlnx_dp: Avoid crash when reading empty RX FIFO
In the previous commit we fixed a crash when the guest read a
register that pop from an empty FIFO.
By auditing the repository, we found another similar use with
an easy way to reproduce:

  $ qemu-system-aarch64 -M xlnx-zcu102 -monitor stdio -S
  QEMU 4.0.50 monitor - type 'help' for more information
  (qemu) xp/b 0xfd4a0134
  Aborted (core dumped)

  (gdb) bt
  #0  0x00007f6936dea57f in raise () at /lib64/libc.so.6
  #1  0x00007f6936dd4895 in abort () at /lib64/libc.so.6
  #2  0x0000561ad32975ec in xlnx_dp_aux_pop_rx_fifo (s=0x7f692babee70) at hw/display/xlnx_dp.c:431
  #3  0x0000561ad3297dc0 in xlnx_dp_read (opaque=0x7f692babee70, offset=77, size=4) at hw/display/xlnx_dp.c:667
  #4  0x0000561ad321b896 in memory_region_read_accessor (mr=0x7f692babf620, addr=308, value=0x7ffe05c1db88, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:439
  #5  0x0000561ad321bd70 in access_with_adjusted_size (addr=308, value=0x7ffe05c1db88, size=1, access_size_min=4, access_size_max=4, access_fn=0x561ad321b858 <memory_region_read_accessor>, mr=0x7f692babf620, attrs=...) at memory.c:569
  #6  0x0000561ad321e9d5 in memory_region_dispatch_read1 (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1420
  #7  0x0000561ad321ea9d in memory_region_dispatch_read (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1447
  #8  0x0000561ad31bd742 in flatview_read_continue (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1, addr1=308, l=1, mr=0x7f692babf620) at exec.c:3385
  #9  0x0000561ad31bd895 in flatview_read (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3423
  #10 0x0000561ad31bd90b in address_space_read_full (as=0x561ad5bb3020, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3436
  #11 0x0000561ad33b1c42 in address_space_read (len=1, buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", attrs=..., addr=4249485620, as=0x561ad5bb3020) at include/exec/memory.h:2131
  #12 0x0000561ad33b1c42 in memory_dump (mon=0x561ad59c4530, count=1, format=120, wsize=1, addr=4249485620, is_physical=1) at monitor/misc.c:723
  #13 0x0000561ad33b1fc1 in hmp_physical_memory_dump (mon=0x561ad59c4530, qdict=0x561ad6c6fd00) at monitor/misc.c:795
  #14 0x0000561ad37b4a9f in handle_hmp_command (mon=0x561ad59c4530, cmdline=0x561ad59d0f22 "/b 0x00000000fd4a0134") at monitor/hmp.c:1082

Fix by checking the FIFO is not empty before popping from it.

The datasheet is not clear about the reset value of this register,
we choose to return '0'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190709113715.7761-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-15 14:17:03 +01:00
BALATON Zoltan
146dd326c1 ati-vga: Fix setting offset together with pitch for r128pro
Turns out my last fix to this broke one case for Rage 128 Pro so
revert that part of previous patch. This now fixes the remaining
rendering problems for MorphOS which now can produce picture with
-device ati-vga (although it may not be optimised yet and video
overlay emulation is still known to be missing).

Fixes: 866ad5f5ff
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: da33261a841755691f698db8190c868df0c0d3ae.1562276605.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-05 09:50:33 +02:00
BALATON Zoltan
584acf34cb ati-vga: Fix reverse bit blts
The pixman library only supports blts with left to right, top to
bottom order but the ATI VGA engine can also do different directions.
Fix support for these via a temporary buffer for now. This fixes
rendering issues related to such blts (such as moving windows) but
some other glitches still remain.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e21855faaeb30d7b1771f084f283f6a30bedb1a3.1562227303.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-05 09:50:33 +02:00
BALATON Zoltan
a38127414b ati-vga: Fix frame buffer endianness for big endian target
The extended mode frame buffer should be little endian even when
emulating big endian machine (such as PPC). This fixes color problems
with MorphOS.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 439aa85061f103446df7b42632d730971a372432.1562151410.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-05 09:50:33 +02:00
BALATON Zoltan
c799d2ee7e ati-vga: Improve readability of ati_2d_blt function
Move common parts before the switch to remove code duplication and
improve readibility.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 04b67ff483223d4722b0b044192558e7d17b36b5.1562151410.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-05 09:50:33 +02:00
Peter Maydell
41742927ee hw/i2c/bitbang_i2c: Use in-place rather than malloc'd bitbang_i2c_interface struct
Currently the bitbang_i2c_init() function allocates a
bitbang_i2c_interface struct which it returns.  This is unfortunate
because it means that if the function is used from a DeviceState
init method then the memory will be leaked by an "init then delete"
cycle, as used by the qmp/hmp commands that list device properties.

Since three out of four of the uses of this function are in
device init methods, switch the function to do an in-place
initialization of a struct that can be embedded in the
device state struct of the caller.

This fixes LeakSanitizer leak warnings that have appeared in the
patchew configuration (which only tries to run the sanitizers
for the x86_64-softmmu target) now that we use the bitbang-i2c
code in an x86-64 config.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190702163844.20458-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-03 10:51:35 +02:00
Li Qiang
b0ee78ff31 virtio-gpu: check if the resource already exists in virtio_gpu_load()
While loading virtio-gpu, the data can be malicious, we
should check if the resource already exists.

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190628161358.10400-1-liq3ea@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-03 10:51:06 +02:00
Gerd Hoffmann
a7f85e03b9 virtio-gpu: fix unmap in error path
We land here in case not everything we've asked for could be mapped.
So unmap only the bytes which have actually been mapped.

Also we didn't access anything, so acces_len can be 0.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20190628072357.31782-1-kraxel@redhat.com
2019-07-03 08:57:09 +02:00
Peter Maydell
0094908375 vga: ati fixes, add ati vgabios.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJdFe5kAAoJEEy22O7T6HE45qQP/37tN/q9FAjfvwu26zbbhcYd
 V0wchXmnKcZ6mszPKtoYnXJV3poQj8aNQGVb3/vMB+3+ENVbrH1J6G7fxxGiZyNc
 owG4JmMy2OmLdPzSeEwnPafOg8m5UPPgXQwuuCNseUFigcx+3zjB8LPY2jW23DGl
 Jxhd8hvxaozZXbUzi7NA5dcoAq11cG6tz5D6DS5pCtbSj/puYF6Zz12o82E0Poaw
 /sxCAwfhVVWNHXrw10Az3TmZUV9JKyc3XkMIy74P/cD4UhJwXCbzdbSZiIwB3ASD
 psm2QPoEp4/kl2xpitycvHI9eWKojEGN/m093UZiPv6rMVzGDNr97ntRsAtXl0VS
 Gf/sU/5JR9yg8ZmxCKE//Z2r8KPWybqdMhfpxt5JGhd2MA3eHUXo4a3IezXxHkQB
 EJrJK+DV42tp6DMH4iMrnJZPET0DWUVdvbAZc+l8HFmMZBeOMXUFfGUNLQaEn3jC
 bUrPGgtt2G80Ltl4usMSGcAwAo9CrES3egh8InENsZi1VrbBVb+7VXN0g1v+1IIf
 IE12q730HWDwfWcbCAmM3s92ISujRQriCsW+NhW5xMc5a0bACXIoHy7zmw7X/ep7
 N0uyv04c3PsPPH5Kou2IcdhVILT5u4ynT2KVCtYo6ip5/DZTpNhvrrVF93vNkbqe
 XrfF5WwTa8iuaDImdq/T
 =8o+H
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190628-pull-request' into staging

vga: ati fixes, add ati vgabios.

# gpg: Signature made Fri 28 Jun 2019 11:39:32 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190628-pull-request:
  ati-vga: switch to vgabios-ati.bin
  seabios: add ati vgabios binary
  seabios: add config for ati vgabios
  ati-vga: Fixes to offset and pitch registers
  ati-vga: Implement DDC and EDID info from monitor
  i2c: Move bitbang_i2c.h to include/hw/i2c/

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 19:11:53 +01:00
Gerd Hoffmann
263807f4e8 ati-vga: switch to vgabios-ati.bin
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190620151104.2678-4-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-28 10:49:36 +02:00
BALATON Zoltan
866ad5f5ff ati-vga: Fixes to offset and pitch registers
Fix bit masks of registers for offset and pitch and also handle
default values for both R128P and RV100. This improves picture a bit
but does not resolve all problems yet so there might be some more bugs
somewhere.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190624100005.7A1CA746395@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-28 10:49:36 +02:00
BALATON Zoltan
c82c7336de ati-vga: Implement DDC and EDID info from monitor
This adds DDC support to ati-vga and connects i2c-ddc to it. This
allows at least MacOS with an ATI ndrv, Linux radeonfb and MorphOS to
get monitor EDID info (although MorphOS splash screen is not displayed
and radeonfb needs additional tables from vgabios-rv100). Xorg needs
additional support from VESA vgabios, it's missing INT10 0x4F15
function (see
https://gitlab.freedesktop.org/xorg/xserver/blob/master/hw/xfree86/vbe/vbe.c)
without which no DDC is available that also prevents loading the
accelerated X driver.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 046ddebb7ec8db48c4e877ee444ec1c41e385a74.1561028123.git.balaton@eik.bme.hu

ati-vga: Clarify comment

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190620195213.C54127461AE@zero.eik.bme.hu

ati-vga: Add DDC reg names for debug

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190621181459.2F8207462AA@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-28 10:49:36 +02:00
Anthony PERARD
a3434a2d56 xen: Import other xen/io/*.h
A Xen public header have been imported into QEMU (by
f65eadb639 "xen: import ring.h from xen"), but there are other header
that depends on ring.h which come from the system when building QEMU.

This patch resolves the issue of having headers from the system
importing a different copie of ring.h.

This patch is prompt by the build issue described in the previous
patch: 'Revert xen/io/ring.h of "Clean up a few header guard symbols"'

ring.h and the new imported headers are moved to
"include/hw/xen/interface" as those describe interfaces with a guest.

The imported headers are cleaned up a bit while importing them: some
part of the file that QEMU doesn't use are removed (description
of how to make hypercall in grant_table.h have been removed).

Other cleanup:
- xen-mapcache.c and xen-legacy-backend.c don't need grant_table.h.
- xenfb.c doesn't need event_channel.h.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190621105441.3025-3-anthony.perard@citrix.com>
2019-06-24 10:42:30 +01:00
Gerd Hoffmann
0a71966253 edid: flip the default to enabled
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20190607083444.32175-1-kraxel@redhat.com
2019-06-13 09:34:50 +02:00
Markus Armbruster
fe2611b016 Clean up a header guard symbols (again)
Commit d52c454aad "contrib: add vhost-user-gpu" and "c68082c43a
virtio-gpu: split virtio-gpu-pci & virtio-vga" created headers with
unusual header guard symbols.  Clean them up

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190607141321.9726-1-armbru@redhat.com>
2019-06-12 13:20:21 +02:00
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster
0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Marc-André Lureau
267f664658 hw/display: add vhost-user-vga & gpu-pci
Add new virtio-gpu devices with a "vhost-user" property. The
associated vhost-user backend is used to handle the virtio rings and
provide rendering results thanks to the vhost-user-gpu protocol.

Example usage:
-object vhost-user-backend,id=vug,cmd="./vhost-user-gpu"
-device vhost-user-vga,vhost-user=vug

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-10-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:30:45 +02:00
Marc-André Lureau
c68082c43a virtio-gpu: split virtio-gpu-pci & virtio-vga
Add base classes that are common to vhost-user-gpu-pci and
vhost-user-vga.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-9-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:30:45 +02:00
Marc-André Lureau
50d8e25ea6 virtio-gpu: split virtio-gpu, introduce virtio-gpu-base
Add a base class that is common to virtio-gpu and vhost-user-gpu
devices.

The VirtIOGPUBase base class provides common functionalities necessary
for both virtio-gpu and vhost-user-gpu:
- common configuration (max-outputs, initial resolution, flags)
- virtio device initialization, including queue setup
- device pre-conditions checks (iommu)
- migration blocker
- virtio device callbacks
- hooking up to qemu display subsystem
- a few common helper functions to reset the device, retrieve display
informations
- a class callback to unblock the rendering (for GL updates)

What is left to the virtio-gpu subdevice to take care of, in short,
are all the virtio queues handling, command processing and migration.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-8-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:30:45 +02:00
Marc-André Lureau
83a7d3c021 virtio-gpu: add a pixman helper header
This will allow to share the format conversion function with
vhost-user-gpu.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:29:07 +02:00
Marc-André Lureau
ad08e67a96 virtio-gpu: add bswap helpers header
The helper functions are useful to build the vhost-user-gpu backend.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:29:07 +02:00
Gerd Hoffmann
da35f7f1ee virtio-gpu: add sanity check
Require a minimum 16x16 size for the scanout, to make sure the guest
can't set either width or height to zero.  This (a) doesn't make sense
at all and (b) causes problems in some UI code.  When using spice this
will triggers an assert().

Reported-by: Tyler Slabinski <tslabinski@slabity.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190527091226.4943-1-kraxel@redhat.com
2019-05-28 08:14:44 +02:00
Hou Qiming
f79081b4b7 hw/display/ramfb: initialize fw-config space with xres/ yres
If xres / yres were specified in QEMU command line, write them as an initial
resolution to the fw-config space on guest reset, which a later BIOS / OVMF
patch can take advantage of.

Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-4-marcel.apfelbaum@gmail.com
[fixed malformed patch]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-24 09:10:29 +02:00
Hou Qiming
a9e0cb67b7 hw/display/ramfb: lock guest resolution after it's set
Only allow one resolution change per guest boot, which prevents a
crash when the guest writes garbage to the configuration space (e.g.
when rebooting).

Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-3-marcel.apfelbaum@gmail.com
[fixed malformed patch]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-24 09:10:29 +02:00
Hou Qiming
d57f252add hw/display/ramfb: fix guest memory un-mapping
Pulled back the `qemu_create_displaysurface_guestmem` function to create
the display surface so that the guest memory gets properly unmapped.

Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-2-marcel.apfelbaum@gmail.com
[rename the new functions and use QEMU coding style]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-24 09:10:29 +02:00
Daniel P. Berrangé
f2784eed30 hw: report invalid disable-legacy|modern usage for virtio-1-only devs
A number of virtio devices (gpu, crypto, mouse, keyboard, tablet) only
support the virtio-1 (aka modern) mode. Currently if the user launches
QEMU, setting those devices to enable legacy mode, QEMU will silently
create them in modern mode, ignoring the user's (mistaken) request.

This patch introduces proper data validation so that an attempt to
configure a virtio-1-only devices in legacy mode gets reported as an
error to the user.

Checking this required introduction of a new field to explicitly track
what operating model is to be used for a device, separately from the
disable_modern and disable_legacy fields that record the user's
requested configuration.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190215103239.28640-2-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Peter Maydell
e24f44dbea Kconfig settings for the Arm machines
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJc2SifAAoJEC7Z13T+cC21vyAQAJe3IrtArFD+3lNB30BfVYP0
 PT7J//C4wH/E+nAZ7bx6K/MMkutNJyMJArpYGqHk+KGm9oJvVfm9fOZKjUF0rJVo
 /WiXH96Ux8eBI0fFUv+ZLCXGWwALIC0N3LeoHbxuwhUBfKd6vv+trddksx/RQjvo
 dWA5aVwQAYm106Bj/Q6loeXyIVeWkrRxwCEcnAygCLGHFSsXJ9gj2js8OHCywLVo
 kV5KIdaLUw20xh9u6mfNS79Jhe7kHz58GIAMg7VwPZqmiTZJSOMb1uZ6eXk+cGBb
 3I2VE7RfEprd+9tE9aEiu1s7mCsW/Kh9NeWQBjiGwTwsja7ewMy08ugqzFFTtyE+
 M1kf/8D/xyhRnyeNQUR+2BlcDKeTxmaK1Ndk4ybu9QnRcye4ieZLLGDMqKZdiT9U
 vwcilGd0QoxmLXXGTNTcW3sRFl2HDg/h8kaH+9dFZSSMb/T4TaoGebpAT013pSou
 t6EWn5QhLu90ptbv57N/4YMRmjg6kvCytl5XMenEoY4cx0bFXkQE8lFv4WTCB9Sv
 wv5QXA6VbmcIdHfnIFkhxU5kUonLWWiFPdCcbLmqG74OCssr17fq9+BDxC4umMxb
 UTnpxegTX4JcpIup1rvV8vN5J/EBbtrhl+qzCwf+ErK+S34xRqXC80ZWxi0JBleV
 BJLdKdD6oJk+xMznju2/
 =wO8o
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-05-13' into staging

Kconfig settings for the Arm machines

# gpg: Signature made Mon 13 May 2019 09:19:43 BST
# gpg:                using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2019-05-13: (29 commits)
  hw/arm: Remove hard-enablement of the remaining PCI devices
  hw/arm: Express dependencies of the musca machines with Kconfig
  hw/arm: Express dependencies of the xlnx-versal-virt machine with Kconfig
  hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig
  hw/arm: Express dependencies of the microbit / nrf51 machine with Kconfig
  hw/arm: Express dependencies of the remaining IMX boards with Kconfig
  hw/arm: Express dependencies of the MSF2 / EMCRAFT_SF2 machine with Kconfig
  hw/arm: Express dependencies of sabrelite with Kconfig
  hw/arm: Express dependencies of canon-a1100 with Kconfig
  hw/arm: Express dependencies of the raspi machines with Kconfig
  hw/arm: Express dependencies of the MPS2 boards with Kconfig
  hw/arm: Express dependencies of allwinner / cubieboard with Kconfig
  hw/arm: Express dependencies of netduino / stm32f2xx with Kconfig
  hw/arm: Express dependencies of the virt machine with Kconfig
  hw/arm: Express dependencies of the aspeed boards with Kconfig
  hw/arm: Express dependencies of collie with Kconfig
  hw/arm: Express dependencies of xilinx-zynq with Kconfig
  hw/arm: Express dependencies of the PXA2xx machines with Kconfig
  hw/arm: Express dependencies of realview, versatile and vexpress with Kconfig
  hw/arm: Express dependencies of stellaris with Kconfig
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-13 16:52:56 +01:00
Thomas Huth
f3c3a1e2bf hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig
This cleans up most settings in default-configs/aarch64-softmmu.mak.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13 09:36:32 +02:00
Thomas Huth
79e93e24de hw/arm: Express dependencies of realview, versatile and vexpress with Kconfig
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13 09:36:31 +02:00
Thomas Huth
4cdea98bfe hw/arm: Express dependencies of integratorcp with Kconfig
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13 09:36:31 +02:00
Markus Armbruster
58ea30f514 Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
2019-05-13 08:58:55 +02:00
Markus Armbruster
bbfff19688 Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:

    contrib/libvhost-user/libvhost-user-glib.h
    contrib/libvhost-user/libvhost-user.c
    contrib/libvhost-user/libvhost-user.h
    linux-user/mips64/cpu_loop.c
    linux-user/mips64/signal.c
    linux-user/sparc64/cpu_loop.c
    linux-user/sparc64/signal.c
    linux-user/x86_64/cpu_loop.c
    linux-user/x86_64/signal.c
    slirp/src/*
    target/s390x/gen-features.c
    tests/fp/platform.h
    tests/migration/s390x/a-b-bios.c
    tests/test-rcu-simpleq.c
    tests/test-rcu-tailq.c
    tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c

We're in the process of spinning out slirp/.  tests/fp/platform.h is
has to include qemu/osdep.h because tests/fp/berkeley-softfloat-3/ and
tests/fp/berkeley-testfloat-3/ don't.  tests/uefi-test-tools/ is guest
software.  The remaining reverts are the same as in commit
b7d89466dd.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190313162812.8885-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Revert change to tests/fp/platform.h, adjust commit message]
2019-05-13 08:58:55 +02:00
Paolo Bonzini
6306cae275 i2c-ddc: move it to hw/display
Move it together with the other EDID code.  hw/i2c should only
include the core and the adapters, not the slaves.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20190325155923.30987-1-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:56:10 +02:00
BALATON Zoltan
349ebdd76d ati-vga: Fix check for blt outside vram
Fix the check preventing calling pixman functions that would access
memory outside allocated vram. The r128 X driver sometimes seem to try
blits that span outside vram, this check prevents crashing QEMU in
that case. (The r128 X driver may have problems even on real hardware
so I'm not sure if it's a client bug or emulation problem but at least
QEMU should survive.)

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Message-Id: <20190409110732.5C5FF7465DB@zero.eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:55:13 +02:00
Daniel P. Berrangé
94932c95c1 qxl: avoid unaligned pointer reads/writes
The SPICE_RING_PROD_ITEM() macro is initializing a local
'uint64_t *' variable to point to the 'el' field inside
the QXLReleaseRing struct. This uint64_t field is not
guaranteed aligned as the struct is packed.

Code should not take the address of fields within a
packed struct. Changing the SPICE_RING_PROD_ITEM()
macro to avoid taking the address of the field is
impractical. It is clearer to just remove the macro
and inline its functionality in the three call sites
that need it.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190412121626.19829-6-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:55:07 +02:00
Philippe Mathieu-Daudé
fad691db49 hw/display/cirrus_vga: Remove unused include
Commit ce3cf70eda split the ISA device out of the PCI one,
but forgot to remove the "hw/loader.h" header inclusion (the ISA
device calls rom_add_vga()).  Remove the now unused include.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190505225640.4592-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:11:27 +02:00
Philippe Mathieu-Daudé
295854686e hw/display/cirrus_vga: Update the documentation URL
The documentation URL is not working, but is backed up by the
Wayback Machine on the Internet Archive.
Replace the outdated link by a captured one.
Add another link to the VGADOC4b.ZIP archive content.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190504121650.12651-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:11:27 +02:00
Prasad J Pandit
d52680fc93 qxl: check release info object
When releasing spice resources in release_resource() routine,
if release info object 'ext.info' is null, it leads to null
pointer dereference. Add check to avoid it.

Reported-by: Bugs SysSec <bugs-syssec@rub.de>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20190425063534.32747-1-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:11:27 +02:00
Philippe Mathieu-Daudé
8a08cc71d2 hw/devices: Move Blizzard declarations into a new header
Add an entries the Blizzard device in MAINTAINERS.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-6-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29 17:57:21 +01:00
Philippe Mathieu-Daudé
ee2ccc57e9 hw/devices: Move TC6393XB declarations into a new header
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29 17:57:21 +01:00
Philippe Mathieu-Daudé
fae06a33f0 hw/display/tc6393xb: Remove unused functions
No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set()
functions since their introduction in commit 88d2c950b0. Time to
remove them.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-4-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29 17:57:21 +01:00
Peter Maydell
84bdc58c06 * Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Peter)
 * Fix for SEV with VFIO (Brijesh)
 * Allow compilation without CONFIG_PARALLEL (Thomas)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlyTvvAUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNNwwf/RrtjBoqu8Ulu6k+HJczdpkhO44c5
 R7sidGaOBHVjT+EsaYZxanXQlsbpDPiXCRoMRMln+O3Kgso/UlVTLBfctIjuf5kp
 P8Amp8rw843yl3TQ+Xaqat1qtfVVN2xjRDoyRwWrTU5w52MVVsan2j1/XzGX/7Bb
 Y3gXRxsN7MyjDCXxhxVwQCxKU2ue3ytvnfdCnu1SNZxZEaFAyGprTNCCTXYugehl
 bVauAs/0qOZWEyvElinNEz+zbqMTm07ULAWBRXgCDcOudsidZFtu0Xl62dXlp1Ou
 0zkaoGiOdMM6OXZkLd6vOK8mY9XDuqaUZE3zAeFMJsK1wSnZdGUVCJO1Hw==
 =Pkcj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Peter)
* Fix for SEV with VFIO (Brijesh)
* Allow compilation without CONFIG_PARALLEL (Thomas)

# gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (23 commits)
  virtio-vga: only enable for specific boards
  config-all-devices.mak: rebuild on reconfigure
  minikconf: fix parser typo
  intel-iommu: optimize nodmar memory regions
  test-announce-self: convert to qgraph
  hw/alpha/Kconfig: DP264 hardware requires e1000 network card
  hw/hppa/Kconfig: Dino board requires e1000 network card
  hw/sh4/Kconfig: r2d machine requires the rtl8139 network card
  hw/ppc/Kconfig: e500 based machines require virtio-net-pci device
  hw/ppc/Kconfig: Bamboo machine requires e1000 network card
  hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices
  hw/mips/Kconfig: Malta machine requires the pcnet network card
  hw/i386/Kconfig: enable devices that can be created by default
  hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI
  hw/isa/Kconfig: i82378 SuperIO requires PC speaker device
  prep: do not select I82374
  hw/i386/Kconfig: PC uses I8257, not I82374
  hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL
  target/i386: sev: Do not pin the ram device memory region
  memory: Fix the memory region type assignment order
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/rdma/Makefile.objs
#	hw/riscv/sifive_plic.c
2019-03-28 09:18:53 +00:00
BALATON Zoltan
339534d402 ati-vga: Fix indexed access to video memory
Coverity (CID 1399700) found that this was wrong so instead of trying
to do it by hand use existing access functions that should work better.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190318223842.427CB7456B2@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-26 12:06:49 +01:00
Markus Armbruster
dec9776049 trace-events: Fix attribution of trace points to source
Some trace points are attributed to the wrong source file.  Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.

Clean up with help of cleanup-trace-events.pl.  Same funnies as in the
previous commit, of course.  Manually shorten its change to
linux-user/trace-events to */signal.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Markus Armbruster
a9779a3ab0 trace-events: Delete unused trace points
Tracked down with cleanup-trace-events.pl.  Funnies requiring manual
post-processing:

* block.c and blockdev.c trace points are in block/trace-events.

* hw/block/nvme.c uses the preprocessor to hide its trace point use
  from cleanup-trace-events.pl.

* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.

* net/colo-compare and net/filter-rewriter.c use pseudo trace points
  colo_compare_udp_miscompare and colo_filter_rewriter_debug to guard
  debug code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-5-armbru@redhat.com
Message-Id: <20190314180929.27722-5-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Markus Armbruster
500016e5db trace-events: Shorten file names in comments
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files.  That's because when trace-events got split up, the
comments were moved verbatim.

Delete the sub/dir/ part from these comments.  Gets rid of several
misspellings.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Paolo Bonzini
938912a866 virtio-vga: only enable for specific boards
When virtio-vga was added, the intention was to only support it for
those machines where the firmware does not know about virtio-gpu,
and supported VGA legacy hardware before virtio-{gpu,vga} were
introduced.

The Kconfig switch however enabled virtio-vga for all machines with
a PCI bus, and libvirt then prefers it even on hardware where
virtio-gpu would be preferrable.  At least for now, only enable
virtio-vga for PC, hppa and pSeries machines, as was the case
before Kconfig dependencies were introduced.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-21 17:42:18 +01:00
Gerd Hoffmann
dc84ed5b57 virtio-gpu: clear command and fence queues on reset
It was never correct to not clear them.  Due to commit "3912e66a3feb
virtio-vga: fix reset." this became more obvious though.  The virtio
rings get properly reset now, and trying to process the stale commands
will trigger an assert in the virtio core.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190314115358.26678-3-kraxel@redhat.com
2019-03-18 13:10:57 +01:00
Gerd Hoffmann
9032e3d71c virtio-gpu: delay virglrenderer reset when blocked.
If renderer_blocked is set do not call virtio_gpu_virgl_reset().
Instead set a flag indicating that virglrenderer needs a reset.
When renderer_blocked gets cleared do the actual reset call.

Without this we can trigger an assert in spice due to calling
spice_qxl_gl_scanout() while another operation is still running:

spice_qxl_gl_scanout: condition `qxl_state->gl_draw_cookie == GL_DRAW_COOKIE_INVALID' failed

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190314115358.26678-2-kraxel@redhat.com
2019-03-18 13:10:57 +01:00
Gerd Hoffmann
a223b478cb ati-vga: fix tracing
HWADDR_PRIx can't be used in tracing, use PRIx64 instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190312081143.24850-1-kraxel@redhat.com
2019-03-18 13:10:17 +01:00
Peter Maydell
cfc3fef6b4 audio: introduce -audiodev
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJch1vTAAoJEEy22O7T6HE4KL8QAI7VfMK8ZKTx/9Su46RL1A0G
 xNYhapdkhK2DEMd7JDY+eg8I8VQEwWroEjphCxLdx3p84Gr44gwgj3T24iRlXugq
 hJEgtBR548bBBdGd6KRihS8ZOro1T2gXol/TRq9z/TEF2LU6AVy52riZ/iydEd2U
 /ibkISR/vLdOnQ1Mj4YpchCZHx1yvMjSOhF/Cw2kXUm8C0jEuj3ws/BfdZQ8DxDG
 ayzS7JwSGOedsoFj+yfWX/YjCiocaXSLux9kyACzhHSJcA/5hw5srbXyhe4JrgdY
 BEqaUa23KiulgFt5fXnprktq+BQba/a4Tbx+YZFaNvX4HXqVccnCNN+VMkV4CvBN
 Y6UwijfaePVaQFP4kP+vpvqdPoJHNGikPlX8j3Q7ofL5+/c7Qk9yChNyB8lpfOIe
 KBNNsIIJO2GVU0IVNuqIGldWZYQw2y8ojpNSntg5lyFIrwZ+ipDFuxD9weZibVgc
 pa4VfPNKW4lOWrDX0PLv5eTNWOLamY3T1wY6pQCOtHgzlChRa28pMWkB7VkzTTQW
 gzipigqpVzmd3l1m2uI7LOovZa326IrGRC1/Yb4a41Gz58p9a1U2sYTijhPlAaeq
 VDMafPTAIJYpg0MW5Uxh1eB05WzNafPfEznjMJ/Z84J4P/oGFxlOGcL99sAbrxpl
 cQWWZlBGINQhxZ1PtvJc
 =7YpW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/audio-20190312-pull-request' into staging

audio: introduce -audiodev

# gpg: Signature made Tue 12 Mar 2019 07:12:19 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20190312-pull-request:
  audio: -audiodev command line option: cleanup
  wavaudio: port to -audiodev config
  spiceaudio: port to -audiodev config
  sdlaudio: port to -audiodev config
  paaudio: port to -audiodev config
  ossaudio: port to -audiodev config
  noaudio: port to -audiodev config
  dsoundaudio: port to -audiodev config
  coreaudio: port to -audiodev config
  alsaaudio: port to -audiodev config
  audio: -audiodev command line option basic implementation
  audio: -audiodev command line option: documentation
  audio: use qapi AudioFormat instead of audfmt_e
  qapi: qapi for audio backends

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	qemu-deprecated.texi
2019-03-12 16:45:13 +00:00
Kővágó, Zoltán
85bc58520c audio: use qapi AudioFormat instead of audfmt_e
I had to include an enum for audio sampling formats into qapi, but that
meant duplicating the audfmt_e enum.  This patch replaces audfmt_e and
associated values with the qapi generated AudioFormat enum.

This patch is mostly a search-and-replace, except for switches where the
qapi generated AUDIO_FORMAT_MAX caused problems.

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11 10:29:26 +01:00
BALATON Zoltan
862b4a291d hw/display: Add basic ATI VGA emulation
At least two machines, the PPC mac99 and MIPS fulong2e, have an ATI
gfx chip by default (Rage 128 Pro and M6/RV100 respectively) and
guests running on these and the PMON2000 firmware of the fulong2e
expect this to be available. Fortunately these are very similar chips
so they can be mostly emulated in the same device model. This patch
adds basic emulation of these ATI VGA chips.

While this is incomplete and currently only enough to run the MIPS
firmware and get framebuffer output with Linux, it allows the fulong2e
board to work more like the real hardware and having it in QEMU in
this state provides a way to experiment with it and allows others to
contribute to improve it. It is compiled for all archs but only the
fulong2e (which currently has no display output at all) is set to use
it by default (in a separate patch).

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Message-id: 0b1b7c22873a6e37627261b04fb687412b25ff4f.1552152100.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11 08:04:55 +01:00
Gerd Hoffmann
0be00346d1 virtio-gpu: make virtio_gpu_reset static
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20190307080244.9011-4-kraxel@redhat.com
2019-03-11 08:04:12 +01:00
Gerd Hoffmann
3912e66a3f virtio-vga: fix reset.
Store reset handler of the parent class and just call that for a
complete virtio reset.  When taking the shortcut and calling
virtio_gpu_reset() directly the generic virtio reset code (for
virtqueues etc) will not be executed.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1597621
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20190307080244.9011-3-kraxel@redhat.com
2019-03-11 08:04:12 +01:00
Peter Maydell
234afe7828 - qtest fixes
- Some generic clean-ups by Philippe
 - macOS CI testing via cirrus-ci.com
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJcgi7HAAoJEC7Z13T+cC21Y00P/1/m7FcVVfMlDw85+rYjkUri
 QWPvWUORhGbAkv87AfsFezCzoO/n3KX+AefPDWbnIM1Ixt8MvS/8zPOWAXwHUKVy
 ira5jP7CNJDPGr13qoO0lNrvU5cmxRWdmLOMbMsqW3Aparc5RBgDPn0bvcm5l2vX
 i90fdxpXvpQ/FgoX0J1j//awa3JXf94pijBb3pL985qXI670ZkRq13JIlmVZ1+Gw
 Fmx4XvpIwajo2HM1G+CcG8ElAxTgYmjC9bkKJW1fddOkwP7wRnZtAdLZpRTzojCb
 CUNBaTSM/xjinVzOhwgiHFtak/ZMOdUZrGjrbin1e/p+Xppw75P7FdUoiSnJNhga
 BJr8LbGcJwcIXfpMdEw7ZGlWACd+D0+G7363jNWOPyff3by6xx4gdCrBsYc4qwSR
 MJ8Wyb5o4oSisUg06VxghGyPTE/xBgog/YgLb4Bu6FXjCPKsl0mKQMxG0ROZLvT+
 dFiaHeeCKEn7Yw6OkdqW9Sa1uGfna7gRCC7hZErDA3URe+02dUBb4VCtnjAaCLx3
 0Jq8jpb2T57N8roP23QFQBxA+Y859qlZPrWzwRqbgdADZCnFsSJlmBxjDmhbYuF0
 4qAQtGFTgdmhjdG/FjJkcMQkCcx4h6V62kqi8HtP+vCd43SFwLPqHH/HKq5cU/Zt
 YIXF2oo6z5k7iqx1H26G
 =DEp5
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-03-08' into staging

- qtest fixes
- Some generic clean-ups by Philippe
- macOS CI testing via cirrus-ci.com

# gpg: Signature made Fri 08 Mar 2019 08:58:47 GMT
# gpg:                using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2019-03-08:
  cirrus.yml: Add macOS continuous integration task
  tests/bios-tables: Improve portability by searching bash in the $PATH
  vhost-user-test: fix leaks
  tests: Do not use "\n" in g_test_message() strings
  hw/devices: Remove unused TC6393XB_RAM definition
  hw: Remove unused 'hw/devices.h' include
  tests: Move qdict-test-data.txt to tests/data/qobject/

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	tests/vhost-user-test.c
2019-03-08 16:31:34 +00:00
Philippe Mathieu-Daudé
04f3c0084d hw: Remove unused 'hw/devices.h' include
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-03-07 22:16:11 +01:00
Paolo Bonzini
0858746b83 lm32-softmmu.mak: express dependencies with Kconfig
%-softmmu.mak only keep boards and optional device
definitions in Kconfig mode.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:46:19 +01:00
Yang Zhong
b42075bb77 virtio: express virtio dependencies with Kconfig
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-42-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Yang Zhong
32690c8bed display: express dependencies with kconfig
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-40-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
1550b0e6bf i2c: express dependencies with Kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-38-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
a7e2315907 isa: express dependencies with kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
7c28b925b7 build: convert pci.mak to Kconfig
Instead of including the same list of devices for each target,
set CONFIG_PCI to true, and make the devices default to present
whenever PCI is available.  However, s390x does not want all the
PCI devices, so there is a separate symbol to enable them.

Done mostly with the following script:

  while read i; do
     i=${i%=y}; i=${i#CONFIG_}
     sed -i -e'/^config '$i'$/!b' -en \
            -e'a\' -e'    default y if PCI_DEVICES\' -e'    depends on PCI' \
          `grep -lw $i hw/*/Kconfig`
  done < default-configs/pci.mak

followed by replacing a few "depends on" clauses with "select"
whenever the symbol is not really related to PCI.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-31-yang.zhong@intel.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
e0e312f352 build: switch to Kconfig
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig.  One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script.  This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
82f5181777 kconfig: introduce kconfig files
The Kconfig files were generated mostly with this script:

  for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
    set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
    shift
    if test $# = 1; then
      cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
    bool

EOF
      git add $(dirname $1)/Kconfig
    else
      echo $i $*
    fi
  done
  sed -i '$d' hw/*/Kconfig
  for i in hw/*; do
    if test -d $i && ! test -f $i/Kconfig; then
      touch $i/Kconfig
      git add $i/Kconfig
    fi
  done

Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.

Kconfig.host and hw/Kconfig were created manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Yang Zhong
06266ecda7 hw/display: make edid configurable
Use CONFIG_EDID to make edid-generate.c and edid-region.c
configurable.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-26-yang.zhong@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Corey Minyard
2ac4c5f4d2 i2c: have I2C receive operation return uint8_t
It is never supposed to fail and cannot return an error, so just
have it return the proper type.  Have it return 0xff on nothing
available, since that's what would happen on a real bus.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27 21:06:08 -06:00
Peter Maydell
59a568b578 vga: bugfixes and edid support for virtio-vga
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJcb7G5AAoJEEy22O7T6HE47MsQANkX98h9JT78GcBhO3UqE1yW
 TDwi6Qj0lUEYdW08LraSIsbDC8XHMmOr35aDEdpUhZyMP1mKmnKaxm+x6YR/q01W
 vExy8nMtyueHSrcJVTe5p+jS5SHXnJlJOvqL/qoh97g0zEbQXnncoBcYdzJGb5DS
 AQGJ/cs+0macNeMcYqauowJONFirKDapntmdCvIHoqZzMhefiyB31U0q6GiC0aiW
 70GjpSX2Mkizit4Chny1Q2DCkJchtM7qwWdVLOLbH8NMsGO3rp9PVVkMMwBGxjyP
 MmT7GVf5cinXfLQGKDuDrgztHjrO2kxRH0St9TBwUVCvMY/zjtVtTc0CabeH+wDd
 2joWGwRPsnYcY6MMAiFoPo0CMXhQhQjVdrqOpn8+L6rs9sdbefk7ZA5fIJoIhvjp
 K5iJ8bCYIdA2R5EdKCKdAariASDAw2/ztqS3WAlpz7gAO2RMJEcqsYlUUXnl4HbB
 0TFuPJpJrCnl5yv/zoKdM8cKyZza/7ULPh4uGfiB7mpcik/UfzkO0VLMuk+7xwJ/
 KoNS4vHZrD7lFDHyvkgHYP7CV12ClaYhEVPWZMZ0Vz7XeVWEe/un1oyryORPSBIO
 kRiqSBCZbolvJlo9Iq3gM8jIFguPD7cGzQoyr+1RaCFX6NT4kqw75n5LW+Pg6CRU
 l25LOigqtUJgKBJKQD/S
 =sx1C
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190222-pull-request' into staging

vga: bugfixes and edid support for virtio-vga

# gpg: Signature made Fri 22 Feb 2019 08:24:25 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190222-pull-request:
  display/virtio: add edid support.
  virtio-gpu: remove useless 'waiting' field
  virtio-gpu: block both 2d and 3d rendering
  virtio-gpu: remove unused config_size
  virtio-gpu: remove unused qdev

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-25 12:49:07 +00:00
Gerd Hoffmann
1ed2cb32dc display/virtio: add edid support.
This patch adds EDID support to the family of virtio-gpu devices.  It is
turned off by default, use the new edid property to enable it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190221081054.13853-1-kraxel@redhat.com
2019-02-22 07:25:04 +01:00
Marc-André Lureau
9a6d74c0de virtio-gpu: remove useless 'waiting' field
Let's check renderer_blocked instead directly.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190221114330.17968-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-22 07:23:57 +01:00
Marc-André Lureau
ad341aacbf virtio-gpu: block both 2d and 3d rendering
Now that 2d commands are translated to 3d rendering, qemu must stop
sending 3d updates (from 2d) to Spice as well.

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1674324

Cc: cfergeau@redhat.com
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Christophe Fergeau <cfergeau@redhat.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 20190221114330.17968-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-22 07:23:57 +01:00
Marc-André Lureau
4a9102c5eb virtio-gpu: remove unused config_size
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190221114330.17968-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-22 07:23:57 +01:00
Marc-André Lureau
836682bc03 virtio-gpu: remove unused qdev
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190221114330.17968-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-22 07:23:57 +01:00
Lukáš Hrázký
be812c0ab7 spice: set device address and device display ID in QXL interface
Calls the new SPICE QXL interface function spice_qxl_set_device_info to
set the hardware address of the graphics device represented by the QXL
interface (e.g. a PCI path) and the device display IDs (the IDs of the
device's monitors that belong to this QXL interface).

Also stops using the deprecated spice_qxl_set_max_monitors, the new
interface function replaces it.

Signed-off-by: Lukáš Hrázký <lhrazky@redhat.com>
Message-Id: <20190215150919.8263-1-lhrazky@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21 10:15:26 +01:00