Virtio spec 1.1 (and earlier), 5.2.5.2 Driver Requirements: Device
Initialization:
"Devices SHOULD always offer VIRTIO_BLK_F_FLUSH, and MUST offer it if
they offer VIRTIO_BLK_F_CONFIG_WCE"
Currently F_CONFIG_WCE and F_WCE are not connected to each other.
Qemu will advertise F_CONFIG_WCE if config-wce argument is
set for virtio-blk device. And F_WCE is advertised only if
underlying block backend actually has it's caching enabled.
Fix this by advertising F_WCE if F_CONFIG_WCE is also advertised.
To preserve backwards compatibility with newer machine types make this
behaviour governed by "x-enable-wce-if-config-wce" virtio-blk-device
property and introduce hw_compat_4_2 with new property being off by
default for all machine types <= 4.2 (but don't introduce 4.3
machine type itself yet).
Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru>
Message-Id: <1572978137-189218-1-git-send-email-wrfsh@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Traditional PCI INTx for vfio devices can only perform well if using
an in-kernel irqchip. Therefore, vfio_intx_update() issues a warning
if an in kernel irqchip is not available.
We usually do have an in-kernel irqchip available for pseries machines
on POWER hosts. However, because the platform allows feature
negotiation of what interrupt controller model to use, we don't
currently initialize it until machine reset. vfio_intx_update() is
called (first) from vfio_realize() before that, so it can issue a
spurious warning, even if we will have an in kernel irqchip by the
time we need it.
To workaround this, make a call to spapr_irq_update_active_intc() from
spapr_irq_init() which is called at machine realize time, before the
vfio realize. This call will be pretty much obsoleted by the later
call at reset time, but it serves to suppress the spurious warning
from VFIO.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
pseries machine type can have one of two different interrupt controllers in
use depending on feature negotiation with the guest. Usually this is
invisible to devices, because they route to a common set of qemu_irqs which
in turn dispatch to the correct back end.
VFIO passthrough devices, however, wire themselves up directly to the KVM
irqchip for performance, which means they are affected by this change in
interrupt controller. To get them to adjust correctly for the change in
irqchip, we need to fire the kvm irqchip change notifier.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Since "spapr: Render full FDT on ibm,client-architecture-support" we build
the entire flatten device tree (FDT) twice - at the reset time and
when "ibm,client-architecture-support" (CAS) is called. The full FDT from
CAS is then applied on top of the SLOF internal device tree.
This is mostly ok, however there is a case when the QEMU is started with
-initrd and for some reason the guest decided to move/unpack the init RAM
disk image - the guest correctly notifies SLOF about the change but
at CAS it is overridden with the QEMU initial location addresses and
the guest may fail to boot if the original initrd memory was changed.
This fixes the problem by only adding the /chosen node at the reset time
to prevent the original QEMU's linux,initrd-start/linux,initrd-end to
override the updated addresses.
This only treats /chosen differently as we know there is a special case
already and it is unlikely anything else will need to change /chosen at CAS
we are better off not touching /chosen after we handed it over to SLOF.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20191024041308.5673-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
SpaprInterruptControllerClass and PnvChipClass have an intc_create() method
that calls the appropriate routine, ie. icp_create() or xive_tctx_create(),
to establish the link between the VCPU and the presenter component of the
interrupt controller during realize.
There aren't any symmetrical call to be called when the VCPU gets unrealized
though. It is assumed that object_unparent() is the only thing to do.
This is questionable because the parenting logic around the CPU and
presenter objects is really an implementation detail of the interrupt
controller. It shouldn't be open-coded in the machine code.
Fix this by adding an intc_destroy() method that undoes what was done in
intc_create(). Also NULLify the presenter pointers to avoid having
stale pointers around. This will allow to reliably check if a vCPU has
a valid presenter.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157192724208.3146912.7254684777515287626.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The M48T59 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The MC146818 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Use copyright statement from 80cabfad16 for "hw/rtc/mc146818rtc.h".
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Last pull request before soft freeze.
* Lots of fixes and cleanups for spapr interrupt controllers
* More SLOF updates to fix problems with full FDT rendering at CAS
time (alas, more yet are to come)
* A few other assorted changes
This isn't quite as well tested as I usually try to do before a pull
request. But I've been sick and running into some other difficulties,
and wanted to get this sent out before heading towards KVM forum.
-----BEGIN PGP SIGNATURE-----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=FRHF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20191024' into staging
ppc patch queue 2019-10-24
Last pull request before soft freeze.
* Lots of fixes and cleanups for spapr interrupt controllers
* More SLOF updates to fix problems with full FDT rendering at CAS
time (alas, more yet are to come)
* A few other assorted changes
This isn't quite as well tested as I usually try to do before a pull
request. But I've been sick and running into some other difficulties,
and wanted to get this sent out before heading towards KVM forum.
# gpg: Signature made Thu 24 Oct 2019 09:14:31 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20191024: (28 commits)
spapr/xive: Set the OS CAM line at reset
ppc/pnv: Fix naming of routines realizing the CPUs
ppc: Reset the interrupt presenter from the CPU reset handler
ppc/pnv: Add a PnvChip pointer to PnvCore
ppc/pnv: Introduce a PnvCore reset handler
spapr_cpu_core: Implement DeviceClass::reset
spapr: move CPU reset after presenter creation
spapr: Don't request to unplug the same core twice
pseries: Update SLOF firmware image
spapr: Move SpaprIrq::nr_xirqs to SpaprMachineClass
spapr: Remove SpaprIrq::nr_msis
spapr, xics, xive: Move SpaprIrq::post_load hook to backends
spapr, xics, xive: Move SpaprIrq::reset hook logic into activate/deactivate
spapr: Remove SpaprIrq::init_kvm hook
spapr, xics, xive: Match signatures for XICS and XIVE KVM connect routines
spapr, xics, xive: Move dt_populate from SpaprIrq to SpaprInterruptController
spapr, xics, xive: Move print_info from SpaprIrq to SpaprInterruptController
spapr, xics, xive: Move set_irq from SpaprIrq to SpaprInterruptController
spapr: Formalize notion of active interrupt controller
spapr, xics, xive: Move irq claim and free from SpaprIrq to SpaprInterruptController
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
rs6000mc_realize() violates memory_region_allocate_system_memory() contract
by calling it multiple times which could break -mem-path. Replace it with
plain memory_region_init_ram() instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20191008113318.7012-3-imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The 'vcpu' suffix is inherited from the sPAPR machine. Use better
names for PowerNV.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20191022163812.330-7-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On the sPAPR machine and PowerNV machine, the interrupt presenters are
created by a machine handler at the core level and are reset
independently. This is not consistent and it raises issues when it
comes to handle hot-plugged CPUs. In that case, the presenters are not
reset. This is less of an issue in XICS, although a zero MFFR could
be a concern, but in XIVE, the OS CAM line is not set and this breaks
the presenting algorithm. The current code has workarounds which need
a global cleanup.
Extend the sPAPR IRQ backend and the PowerNV Chip class with a new
cpu_intc_reset() handler called by the CPU reset handler and remove
the XiveTCTX reset handler which is now redundant.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191022163812.330-6-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We will use it to reset the interrupt presenter from the CPU reset
handler.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20191022163812.330-5-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
in which individual CPUs are reset. It will ease the introduction of
future change reseting the interrupt presenter from the CPU reset
handler.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20191022163812.330-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since vCPUs aren't plugged into a bus, we manually register a reset
handler for each vCPU. We also call this handler at realize time
to ensure hot plugged vCPUs are reset before being exposed to the
guest. This results in vCPUs being reset twice at machine reset.
It doesn't break anything but it is slightly suboptimal and above
all confusing.
The hotplug path in device_set_realized() already knows how to reset
a hotplugged device if the device reset handler is present. Implement
one for sPAPR CPU cores that resets all vCPUs under a core.
While here rename spapr_cpu_reset() to spapr_reset_vcpu() for
consistency with spapr_realize_vcpu() and spapr_unrealize_vcpu().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[clg: add documentation on the reset helper usage ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191022163812.330-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This change prepares ground for future changes which will reset the
interrupt presenter in the reset handler of the sPAPR and PowerNV
cores.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191022163812.330-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We must not call spapr_drc_detach() on a detached DRC otherwise bad things
can happen, ie. QEMU hangs or crashes. This is easily demonstrated with
a CPU hotplug/unplug loop using QMP.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157185826035.3073024.1664101000438499392.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For the benefit of peripheral device allocation, the number of available
irqs really wants to be the same on a given machine type version,
regardless of what irq backends we are using. That's the case now, but
only because we make sure the different SpaprIrq instances have the same
value except for the special legacy one.
Since this really only depends on machine type version, move the value to
SpaprMachineClass instead of SpaprIrq. This also puts the code to set it
to the lower value on old machine types right next to setting
legacy_irq_allocation, which needs to go hand in hand.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The nr_msis value we use here has to line up with whether we're using
legacy or modern irq allocation. Therefore it's safer to derive it based
on legacy_irq_allocation rather than having SpaprIrq contain a canned
value.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The remaining logic in the post_load hook really belongs to the interrupt
controller backends, and just needs to be called on the active controller
(after the active controller is set to the right thing based on the
incoming migration in the generic spapr_irq_post_load() logic).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
It turns out that all the logic in the SpaprIrq::reset hooks (and some in
the SpaprIrq::post_load hooks) isn't really related to resetting the irq
backend (that's handled by the backends' own reset routines). Rather its
about getting the backend ready to be the active interrupt controller or
stopping being the active interrupt controller - reset (and post_load) is
just the only time that changes at present.
To make this flow clearer, move the logic into the explicit backend
activate and deactivate hooks.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
This hook is a bit odd. The only caller is spapr_irq_init_kvm(), but
it explicitly takes an SpaprIrq *, so it's never really called through the
current SpaprIrq. Essentially this is just a way of passing through a
function pointer so that spapr_irq_init_kvm() can handle some
configuration and error handling logic without duplicating it between the
xics and xive reset paths.
So, make it just take that function pointer. Because of earlier reworks
to the KVM connect/disconnect code in the xics and xive backends we can
also eliminate some wrapper functions and streamline error handling a bit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Both XICS and XIVE have routines to connect and disconnect KVM with
similar but not identical signatures. This adjusts them to match
exactly, which will be useful for further cleanups later.
While we're there, we add an explicit return value to the connect path
to streamline error reporting in the callers. We remove error
reporting the disconnect path. In the XICS case this wasn't used at
all. In the XIVE case the only error case was if the KVM device was
set up, but KVM didn't have the capability to do so which is pretty
obviously impossible.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
This method depends only on the active irq controller. Now that we've
formalized the notion of active controller we can dispatch directly
through that, rather than dispatching via SpaprIrq with the dual
version having to do a second conditional dispatch.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
This method depends only on the active irq controller. Now that we've
formalized the notion of active controller we can dispatch directly
through that, rather than dispatching via SpaprIrq with the dual
version having to do a second conditional dispatch.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
This method depends only on the active irq controller. Now that we've
formalized the notion of active controller we can dispatch directly through
that, rather than dispatching via SpaprIrq with the dual version having
to do a second conditional dispatch.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
spapr now has the mechanism of constructing both XICS and XIVE instances of
the SpaprInterruptController interface. However, only one of the interrupt
controllers will actually be active at any given time, depending on feature
negotiation with the guest. This is handled in the current code via
spapr_irq_current() which checks the OV5 vector from feature negotiation to
determine the current backend.
Determining the active controller at the point we need it like this
can be pretty confusing, because it makes it very non obvious at what
points the active controller can change. This can make it difficult
to reason about the code and where a change of active controller could
appear in sequence with other events.
Make this mechanism more explicit by adding an 'active_intc' pointer
and an explicit spapr_irq_update_active_intc() function to update it
from the CAS state. We also add hooks on the intc backend which will
get called when it is activated or deactivated.
For now we just introduce the switch and hooks, later patches will
actually start using them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
These methods, like cpu_intc_create, really belong to the interrupt
controller, but need to be called on all possible intcs.
Like cpu_intc_create, therefore, make them methods on the intc and
always call it for all existing intcs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
This method essentially represents code which belongs to the interrupt
controller, but needs to be called on all possible intcs, rather than
just the currently active one. The "dual" version therefore calls
into the xics and xive versions confusingly.
Handle this more directly, by making it instead a method on the intc
backend, and always calling it on every backend that exists.
While we're there, streamline the error reporting a bit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The SpaprIrq structure is used to represent ths spapr machine's irq
backend. Except that it kind of conflates two concepts: one is the
backend proper - a specific interrupt controller that we might or
might not be using, the other is the irq configuration which covers
the layout of irq space and which interrupt controllers are allowed.
This leads to some pretty confusing code paths for the "dual"
configuration where its hooks redirect to other SpaprIrq structures
depending on the currently active irq controller.
To clean this up, we start by introducing a new
SpaprInterruptController QOM interface to represent strictly an
interrupt controller backend, not counting anything configuration
related. We implement this interface in the XICs and XIVE interrupt
controllers, and in future we'll move relevant methods from SpaprIrq
into it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Support for setting VSMT is available in KVM since linux-4.13. Most distros
that support KVM on POWER already have it. It thus seem reasonable enough
to have the default machine to set VSMT to smp_threads.
This brings contiguous VCPU ids and thus brings their upper bound down to
the machine's max_cpus. This is especially useful for XIVE KVM devices,
which may thus allocate only one VP descriptor per VCPU.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157010411885.246126.12610015369068227139.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Include the XIVE_TRIGGER_PQ bit in the trigger data which is how
hardware signals to the IC that the PQ bits of the interrupt source
have been checked.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191007084102.29776-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add MachineClass::auto_enable_numa field. When it is true, a NUMA node
is expected to be created implicitly.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190905083238.1799-1-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Here's the next batch of ppc and spapr patches. Includes:
* Fist part of a large cleanup to irq infrastructure
* Recreate the full FDT at CAS time, instead of making a difficult
to follow set of updates. This will help us move towards
eliminating CAS reboots altogether
* No longer provide RTAS blob to SLOF - SLOF can include it just as
well itself, since guests will generally need to relocate it with
a call to instantiate-rtas
* A number of DFP fixes and cleanups from Mark Cave-Ayland
* Assorted bugfixes
* Several new small devices for powernv
-----BEGIN PGP SIGNATURE-----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=PXXe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20191004' into staging
ppc patch queue 2019-10-04
Here's the next batch of ppc and spapr patches. Includes:
* Fist part of a large cleanup to irq infrastructure
* Recreate the full FDT at CAS time, instead of making a difficult
to follow set of updates. This will help us move towards
eliminating CAS reboots altogether
* No longer provide RTAS blob to SLOF - SLOF can include it just as
well itself, since guests will generally need to relocate it with
a call to instantiate-rtas
* A number of DFP fixes and cleanups from Mark Cave-Ayland
* Assorted bugfixes
* Several new small devices for powernv
# gpg: Signature made Fri 04 Oct 2019 10:35:57 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20191004: (53 commits)
ppc/pnv: Remove the XICSFabric Interface from the POWER9 machine
spapr: Eliminate SpaprIrq::init hook
spapr: Add return value to spapr_irq_check()
spapr: Use less cryptic representation of which irq backends are supported
xive: Improve irq claim/free path
spapr, xics, xive: Better use of assert()s on irq claim/free paths
spapr: Handle freeing of multiple irqs in frontend only
spapr: Remove unhelpful tracepoints from spapr_irq_free_xics()
spapr: Eliminate SpaprIrq:get_nodename method
spapr: Simplify spapr_qirq() handling
spapr: Fix indexing of XICS irqs
spapr: Eliminate nr_irqs parameter to SpaprIrq::init
spapr: Clarify and fix handling of nr_irqs
spapr: Replace spapr_vio_qirq() helper with spapr_vio_irq_pulse() helper
spapr: Fold spapr_phb_lsi_qirq() into its single caller
xics: Create sPAPR specific ICS subtype
xics: Merge TYPE_ICS_BASE and TYPE_ICS_SIMPLE classes
xics: Eliminate reset hook
xics: Rename misleading ics_simple_*() functions
xics: Eliminate 'reject', 'resend' and 'eoi' class hooks
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, when a notifier is attempted to be registered and its
flags are not supported (especially the MAP one) by the IOMMU MR,
we generally abruptly exit in the IOMMU code. The failure could be
handled more nicely in the caller and especially in the VFIO code.
So let's allow memory_region_register_iommu_notifier() to fail as
well as notify_flag_changed() callback.
All sites implementing the callback are updated. This patch does
not yet remove the exit(1) in the amd_iommu code.
in SMMUv3 we turn the warning message into an error message saying
that the assigned device would not work properly.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The POWER8 PowerNV machine needs to implement a XICSFabric interface
as this is the POWER8 interrupt controller model. But the POWER9
machine uselessly inherits of XICSFabric from the common PowerNV
machine definition.
Open code machine definitions to have a better control on the
different interfaces each machine should define.
Fixes: f30c843ced ("ppc/pnv: Introduce PowerNV machines with fixed CPU models")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191003143617.21682-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This method is used to set up the interrupt backends for the current
configuration. However, this means some confusing redirection between
the "dual" mode init and the init hooks for xics only and xive only modes.
Since we now have simple flags indicating whether XICS and/or XIVE are
supported, it's easier to just open code each initialization directly in
spapr_irq_init(). This will also make some future cleanups simpler.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Explicitly return success or failure, rather than just relying on the
Error ** parameter. This makes handling it less verbose in the caller.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
SpaprIrq::ov5 stores the value for a particular byte in PAPR option vector
5 which indicates whether XICS, XIVE or both interrupt controllers are
available. As usual for PAPR, the encoding is kind of overly complicated
and confusing (though to be fair there are some backwards compat things it
has to handle).
But to make our internal code clearer, have SpaprIrq encode more directly
which backends are available as two booleans, and derive the OV5 value from
that at the point we need it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
spapr_xive_irq_claim() returns a bool to indicate if it succeeded.
But most of the callers and one callee use int return values and/or an
Error * with more information instead. In any case, ints are a more
common idiom for success/failure states than bools (one never knows
what sense they'll be in).
So instead change to an int return value to indicate presence of error
+ an Error * to describe the details through that call chain.
It also didn't actually check if the irq was already claimed, which is
one of the primary purposes of the claim path, so do that.
spapr_xive_irq_free() also returned a bool... which no callers checked
and was always true, so just drop it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
The irq claim and free paths for both XICS and XIVE check for some
validity conditions. Some of these represent genuine runtime failures,
however others - particularly checking that the basic irq number is in a
sane range - could only fail in the case of bugs in the callin code.
Therefore use assert()s instead of runtime failures for those.
In addition the non backend-specific part of the claim/free paths should
only be used for PAPR external irqs, that is in the range SPAPR_XIRQ_BASE
to the maximum irq number. Put assert()s for that into the top level
dispatchers as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
spapr_irq_free() can be used to free multiple irqs at once. That's useful
for its callers, but there's no need to make the individual backend hooks
handle this. We can loop across the irqs in spapr_irq_free() itself and
have the hooks just do one at time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
These traces contain some useless information (the always-0 source#) and
have no equivalents for XIVE mode. For now just remove them, and we can
put back something more sensible if and when we need it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This method is used to determine the name of the irq backend's node in the
device tree, so that we can find its phandle (after SLOF may have modified
it from the phandle we initially gave it).
But, in the two cases the only difference between the node name is the
presence of a unit address. Searching for a node name without considering
unit address is standard practice for the device tree, and
fdt_subnode_offset() will do exactly that, making this method unecessary.
While we're there, remove the XICS_NODENAME define. The name
"interrupt-controller" is required by PAPR (and IEEE1275), and a bunch of
places assume it already.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently spapr_qirq(), whic is used to find the qemu_irq for an spapr
global irq number, redirects through the SpaprIrq::qirq method. But
the array of qemu_irqs is allocated in the PAPR layer, not the
backends, and so the method implementations all return the same thing,
just differing in the preliminary checks they make.
So, we can remove the method, and just implement spapr_qirq() directly,
including all the relevant checks in one place. We change all those
checks into assert()s as well, since a failure here indicates an error in
the calling code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
spapr global irq numbers are different from the source numbers on the ICS
when using XICS - they're offset by XICS_IRQ_BASE (0x1000). But
spapr_irq_set_irq_xics() was passing through the global irq number to
the ICS code unmodified.
We only got away with this because of a counteracting bug - we were
incorrectly adjusting the qemu_irq we returned for a requested global irq
number.
That approach mostly worked but is very confusing, incorrectly relies on
the way the qemu_irq array is allocated, and undermines the intention of
having the global array of qemu_irqs for spapr have a consistent meaning
regardless of irq backend.
So, fix both set_irq and qemu_irq indexing. We rename some parameters at
the same time to make it clear that they are referring to spapr global
irq numbers.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
The only reason this parameter was needed was to work around the
inconsistent meaning of nr_irqs between xics and xive. Now that we've
fixed that, we can consistently use the number directly in the SpaprIrq
configuration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Both the XICS and XIVE interrupt backends have a "nr-irqs" property, but
it means slightly different things. For XICS (or, strictly, the ICS) it
indicates the number of "real" external IRQs. Those start at XICS_IRQ_BASE
(0x1000) and don't include the special IPI vector. For XIVE, however, it
includes the whole IRQ space, including XIVE's many IPI vectors.
The spapr code currently doesn't handle this sensibly, with the
nr_irqs value in SpaprIrq having different meanings depending on the
backend. We fix this by renaming nr_irqs to nr_xirqs and making it
always indicate just the number of external irqs, adjusting the value
we pass to XIVE accordingly. We also move to using common constants
in most of the irq configurations, to make it clearer that the IRQ
space looks the same to the guest (and emulated devices), even if the
backend is different.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Every caller of spapr_vio_qirq() immediately calls qemu_irq_pulse() with
the result, so we might as well just fold that into the helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
No point having a two-line helper that's used exactly once, and not likely
to be used anywhere else in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We create a subtype of TYPE_ICS specifically for sPAPR. For now all this
does is move the setup of the PAPR specific hcalls and RTAS calls to
the realize() function for this, rather than requiring the PAPR code to
explicitly call xics_spapr_init(). In future it will have some more
function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
TYPE_ICS_SIMPLE is the only subtype of TYPE_ICS_BASE that's ever
instantiated. The existence of different classes is mostly a hang
over from when we (misguidedly) had separate subtypes for the KVM and
non-KVM version of the device.
There could be some call for an abstract base type for ICS variants
that use a different representation of their state (PowerNV PHB3 might
want this). The current split isn't really in the right place for
that though. If we need this in future, we can re-implement it more
in line with what we actually need.
So, collapse the two classes together into just TYPE_ICS.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
There are a number of ics_simple_*() functions that aren't actually
specific to TYPE_XICS_SIMPLE at all, and are equally valid on
TYPE_XICS_BASE. Rename them to ics_*() accordingly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
The ibm,client-architecture-support call is a way for the guest to
negotiate capabilities with a hypervisor. It is implemented as:
- the guest calls SLOF via client interface;
- SLOF calls QEMU (H_CAS hypercall) with an options vector from the guest;
- QEMU returns a device tree diff (which uses FDT format with
an additional header before it);
- SLOF walks through the partial diff tree and updates its internal tree
with the values from the diff.
This changes QEMU to simply re-render the entire tree and send it as
an update. SLOF can handle this already mostly, [1] is needed before this
can be applied. This stores the resulting tree in the spapr machine to have
the latest valid FDT copy possible (this should not matter much as
H_UPDATE_DT happens right after that but nevertheless).
The benefit is reduced code size as there is no need for another set of
DT rendering helpers such as spapr_fixup_cpu_dt().
The downside is that the updates are bigger now (as they include all
nodes and properties) but the difference on a '-smp 256,threads=1' system
before/after is 2.35s vs. 2.5s.
[1] https://patchwork.ozlabs.org/patch/1152915/
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU does not allocate PCI resources (BARs) in any case - coldplug devices
are configured by the firmware and hotplug devices rely on the guest
system to do the assignment via the PCI rescan mechanism. Also in order
to create non empty "assigned-addresses", the device has to be enabled
(i.e. PCI_COMMAND needs the MMIO bit set) first as otherwise
io_regions[i].addr are -1, and devices are not enabled at this point.
This removes "assigned-addresses" and leaves it to those who actually
do resource allocation.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190927022651.71642-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
SLOF implements one itself so let's remove it from QEMU. It is one less
image and simpler setup as the RTAS blob never stays in its initial place
anyway as the guest OS always decides where to put it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are going to use spapr_build_fdt() for the boot time FDT and as an
update for SLOF during handling of H_CAS. SLOF will apply all properties
from the QEMU's FDT which is usually ok unless there are properties
changed by grub or guest kernel. The properties are:
bootargs, linux,initrd-start, linux,initrd-end, linux,stdout-path,
linux,rtas-base, linux,rtas-entry. Resetting those during CAS will most
likely cause grub failure.
Don't create such properties if we're booting without "-kernel" and
"-initrd" so they won't get included into the DT update blob and
therefore the guest is more likely to boot successfully.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Tweaked commit message based on Greg Kurz's input]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The device tree build by QEMU at the machine reset time is used by SLOF
to build its internal device tree but the node names are not preserved
exactly so when QEMU provides a device tree update in response to H_CAS,
it might become tricky to match a node from the update blob to
the actual node in SLOF.
This removed leading zeroes from "memory@" nodes and makes
the DTC checker happy.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Add a missing g_free(fdt) if the resulting tree is bigger
than the space allocated by SLOF.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The number of NUMA nodes in the system is fixed from the command line.
Therefore, there's no need to recalculate it at reset time, and we can
determine the special gpu_numa_id value used for NVLink2 devices at init
time.
This simplifies the reset path a bit which will make further improvements
easier.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Certain old guest versions don't understand the radix MMU introduced with
POWER ISA 3.0, but incorrectly select it if presented with the option at
CAS time. We workaround this in qemu by explicitly excluding the radix
(and other ISA 3.0 linked) options if the guest doesn't explicitly note
support for ISA 3.0.
This is handled by the 'cas_legacy_guest_workaround' flag, which is pretty
vague. Rename it to 'cas_pre_isa3_guest' to be clearer about what it's for.
In addition, we unnecessarily call spapr_populate_pa_features() with
different options when initially constructing the device tree and when
adjusting it at CAS time. At the initial construct time cas_pre_isa3_guest
is already false, so we can still use the flag, rather than explicitly
overriding it to be false at the callsite.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
It will help us to discard interrupt numbers which have not been
claimed in the next patch.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190911133937.2716-2-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
add PnvHomer device model to emulate homer memory access
for pstate table, occ-sensors, slw, occ static and dynamic
values for Power8 and Power9 chips.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-4-bala24@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
emulate occ common area region with occ sram device model which
occ and skiboot uses it to communicate regarding sensors, slw
and HWMON in PowerNV emulated host.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-3-bala24@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
During PowerNV boot skiboot populates the device tree by
retrieving base address of homer/occ common area from
PBA BARs and prd ipoll mask by accessing xscom read/write
accesses.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-2-bala24@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Unless the machine was started with kernel-irqchip=on, we cannot easily
tell if we're actually using an in-kernel or an emulated irqchip. This
information is important enough that it is worth printing it in 'info
pic'.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156829860985.2073005.5893493824873412773.stgit@bahia.tls.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There were few trailing comments after `/*` instead in
new line and line more than 80 character, these fixes are
trivial and doesn't change any logic in code.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190911142925.19197-5-bala24@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Coverity is reporting in CID 1405304 that tpm_execute() may pass a NULL
tpm_proxy->host_path pointer to open(). This is based on the fact that
h_tpm_comm() does a NULL check on tpm_proxy->host_path and then passes
tpm_proxy to tpm_execute().
The check in h_tpm_comm() is abusive actually since a spapr-proxy-tpm
requires a non NULL host_path property, as checked during realize.
Fixes: 0fb6bd0732
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156805260916.1779401.11054185183758185247.stgit@bahia.lan>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fixes the dtc output :
ERROR (node_name_chars): //bmc: Bad character '/' in node name
Warning (avoid_unnecessary_addr_size): /bmc: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190902092932.20200-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When we hotplug a CPU on memory-less/cpu-less node, the linux kernel
crashes.
This happens because linux kernel needs to know the NUMA topology at
start to be able to initialize the distance lookup table.
On pseries, the topology is provided by the firmware via the existing
CPUs and memory information. Thus a node without memory and CPU cannot be
discovered by the kernel.
To avoid the kernel crash, do not allow to start pseries with empty
nodes.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190830161345.22436-1-lvivier@redhat.com>
[dwg: Rework to cope with movement of numa state from globals to MachineState]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 78dd48df3 removed the last caller of register_savevm_live for an
instantiable device (rather than a single system wide device);
so trim out the parameter.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190822115433.12070-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Bug fixes:
* Fix die-id validation regression (Eduardo Habkost)
* vmmouse: Properly reset state (Jan Kiszka)
* hostmem-file: fix pmem file size check (Stefan Hajnoczi)
* Keep query-hotpluggable-cpus output compatible with older QEMU
if '-smp dies' is not set (Igor Mammedov)
* migration: Do not re-read the clock on pre_save in case of paused guest
(Maxiwell S. Garcia)
Cleanups:
* NUMA code cleanups (Tao Xu)
* Remove stale externs from includes (Alex Bennée)
Features:
* qapi: report the default CPU type for each machine (Daniel P. Berrangé)
-----BEGIN PGP SIGNATURE-----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=u5HZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine + x86 queue, 2019-09-03
Bug fixes:
* Fix die-id validation regression (Eduardo Habkost)
* vmmouse: Properly reset state (Jan Kiszka)
* hostmem-file: fix pmem file size check (Stefan Hajnoczi)
* Keep query-hotpluggable-cpus output compatible with older QEMU
if '-smp dies' is not set (Igor Mammedov)
* migration: Do not re-read the clock on pre_save in case of paused guest
(Maxiwell S. Garcia)
Cleanups:
* NUMA code cleanups (Tao Xu)
* Remove stale externs from includes (Alex Bennée)
Features:
* qapi: report the default CPU type for each machine (Daniel P. Berrangé)
# gpg: Signature made Tue 03 Sep 2019 21:57:37 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
migration: Do not re-read the clock on pre_save in case of paused guest
x86: do not advertise die-id in query-hotpluggbale-cpus if '-smp dies' is not set
i386/vmmouse: Properly reset state
hostmem-file: fix pmem file size check
qapi: report the default CPU type for each machine
pc: Don't make die-id mandatory unless necessary
pc: Improve error message when die-id is omitted
pc: Fix error message on die-id validation
numa: move numa global variable numa_info into MachineState
numa: move numa global variable have_numa_distance into MachineState
numa: move numa global variable nb_numa_nodes into MachineState
hw/arm: simplify arm_load_dtb
includes: remove stale [smp|max]_cpus externs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move existing numa global numa_info (renamed as "nodes") into NumaState.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-5-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add struct NumaState in MachineState and move existing numa global
nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable
numa_support into MachineClass to decide which submachines support NUMA.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-3-tao3.xu@intel.com>
[ehabkost: include hw/boards.h again to fix build failures]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A recent change in spapr_machine_reset() showed that resetting the compat
mode in spapr_machine_reset() for the boot vCPU and in spapr_cpu_reset()
for all other vCPUs was fragile. The fix was thus to reset the compat mode
for all vCPUs in spapr_machine_reset(), but we still have to propagate
it to hot-plugged CPUs. This is still performed from spapr_cpu_reset(),
hence resulting in ppc_set_compat() being called twice for every vCPU at
machine reset. Apart from wasting cycles, which isn't really an issue
during machine reset, this seems to indicate that spapr_cpu_reset() isn't
the best place to set the compat mode.
A natural candidate for CPU-hotplug specific code is spapr_core_plug().
Also, it sits in the same file as spapr_machine_reset() : this makes
it easier for someone who wants to know when the compat PVR is set.
Call ppc_set_compat() from there. This doesn't need to be done for
initial vCPUs since the compat PVR is 0 and spapr_machine_reset() sets
the appropriate value later. No need to do this on manually added vCPUS
on the destination QEMU during migration since the compat PVR is
part of the migrated vCPU state. Both conditions can be checked with
spapr_drc_hotplugged().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156701285312.499757.7807417667750711711.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The QEMU coding style requires:
- to typedef structured types (HACKING)
- to use CamelCase for types and structure names (CODING_STYLE)
Do that for PCI and Nvlink2 code.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156701644465.505236.2850655823182656869.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pseries guests do not normally allocate PCI resources and rely on
the system firmware doing so. Furthermore at least at some point in
the past the pseries guests won't even allowed to change BARs, probably
it is still the case for phyp. So since the initial commit we have [1]
which prevents resource reallocation.
This is not a problem until we want specific BAR alignments, for example,
PAGE_SIZE==64k to make sure we can still map MMIO BARs directly. For
the boot time devices we handle this in SLOF [2] but since QEMU's RTAS
does not allocate BARs, the guest does this instead and does not align
BARs even if Linux is given pci=resource_alignment=16@pci:0:0 as
PCI_PROBE_ONLY makes Linux ignore alignment requests.
ARM folks added a dial to control PCI_PROBE_ONLY via the device tree [3].
This makes use of the dial to advertise to the guest that we can handle
BAR reassignments. This limits the change to the latest pseries machine
to avoid old guests explosion.
We do not remove the flag from [1] as pseries guests are still supported
under phyp so having that removed may cause problems.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/platforms/pseries/setup.c?h=v5.1#n773
[2] https://git.qemu.org/?p=SLOF.git;a=blob;f=board-qemu/slof/pci-phb.fs;h=06729bcf77a0d4e900c527adcd9befe2a269f65d;hb=HEAD#l338
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f81c11af
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190719043734.108462-1-aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR platform includes feature negotiation between the guest and
platform. That sometimes requires reconfiguring the virtual hardware, and
in some cases that is a complex enough process that we trigger a system
reset to handle it. That interacts badly with -no-reboot - we trigger the
reboot, -no-reboot means we exit and so the guest never gets to try again.
Eventually we want to get rid of CAS reboots entirely, since they're odd
and irritating for the user. But in the meantime we can fix the -no-reboot
problem by using SHUTDOWN_CAUSE_SUBSYSTEM_RESET which ignores -no-reboot
and seems to be designed for this sort of faux-reset for internal purposes
only.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The ibm,get_system_parameter rtas call is used by the guest to retrieve
data relating to certain parameters of the system. The SPLPAR
characteristics option (token 20) is used to determine characteristics of
the environment in which the lpar will run.
It may be useful for a guest to know the number of physical host threads
present on the underlying system where it is being run. Add the
characteristic "HostThrs" to the SPLPAR Characteristics
ibm,get_system_parameter rtas call to expose this information to a
guest. Add a n_host_threads property to the processor class which is
then used to retrieve this information and define it for POWER8 and
POWER9. Other processors will default to 0 and the charateristic won't
be added.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20190827045751.22123-1-sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If we a migrate P8 machine to a P9 machine, the migration fails on
destination with:
error while loading state for instance 0x1 of device 'cpu'
load of migration failed: Operation not permitted
This is caused because the compat_pvr field is only present for the first
CPU.
Originally, spapr_machine_reset() calls ppc_set_compat() to set the value
max_compat_pvr for the first cpu and this was propagated to all CPUs by
spapr_cpu_reset(). Now, as spapr_cpu_reset() is called before that, the
value is not propagated to all CPUs and the migration fails.
To fix that, propagate the new value to all CPUs in spapr_machine_reset().
Fixes: 25c9780d38 ("spapr: Reset CAS & IRQ subsystem after devices")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190826090812.19080-1-lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is nothing wrong with how sPAPR handles multifunction PCI
hot unplugs. The problem is that x86 does it simpler. Instead of
removing each non-zero function and then removing function zero,
x86 can remove any function of the slot to trigger the hot unplug.
Libvirt will be directly impacted by this difference, in the
(hopefully soon) PCI Multifunction hot plug/unplug support. For
hot plugs, both x86 and sPAPR will operate the same way: a XML
with all desired functions to be added, then consecutive hotplugs
of all non-zero functions first, zero last. For hot unplugs, at
least in the current state, a XML with the devices to be removed
must also be provided because of how sPAPR operates - x86 does
not need it - since any function unplug will unplug the whole
PCIe slot. This difference puts extra strain in the management
layer, which needs to either handle both archs differently in
the unplug scenario or choose treat x86 like sPAPR, forcing x86
users to cope with sPAPR internals.
This patch changes spapr_pci_unplug_request to handle the
unplug of function zero differently. When removing function zero,
instead of error-ing out if there are any remaining function
DRCs which needs detaching, detach those. This has no effect in
any existing scripts that are detaching the non-zero functions
before function zero, and can be used by management as a shortcut
to remove the whole PCI multifunction device without specifying
each child function.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20190822195918.3307-1-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make the current "powernv" machine an abstract type and derive from it
new machines with specific CPU models: power8 and power9.
The "powernv" machine is now an alias on the "powernv9" machine.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190731141233.1340-2-clg@kaod.org>
[dwg: Adjust pnv-xscom-test to cope with this change]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Devices such as the BT or serial devices require a valid
"interrupt-parent" phandle in the device tree and it is currently
empty (0x0). It was not a problem until now but since OpenFirmare
started using a recent libdft (>= 1.4.7), petitboot fails to boot the
system image with error :
dtc_resize: fdt_open_into returned FDT_ERR_BADMAGIC
Provide a phandle for the LPC bus.
Suggested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190723090138.30623-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This makes the powernv machine easier for end users as the default
initrd address (1.5GB) is now within RAM.
This uses less than 2GB of RAM to ensure 32 bit Qemu still works.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20190821030945.473-1-joel@jms.id.au>
[dwg: Fix comment style for checkpatch]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
GCC9 is confused by this comment when building with CFLAG
-Wimplicit-fallthrough=2:
CC ppc64-softmmu/hw/ppc/spapr_rtc.o
hw/ppc/spapr_events.c: In function ‘rtas_event_log_to_source’:
hw/ppc/spapr_events.c:312:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
312 | if (spapr_ovec_test(spapr->ov5_cas, OV5_HP_EVT)) {
| ^
hw/ppc/spapr_events.c:317:5: note: here
317 | case RTAS_LOG_TYPE_EPOW:
| ^~~~
cc1: all warnings being treated as errors
Rewrite the comment using 'fall through' which is recognized by
GCC and static analyzers.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190719131425.10835-8-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
PHBs already take care of clearing the MSIs from the bitmap during reset
or unplug. No need to do this globally from the machine code. Rather add
an assert to ensure that PHBs have acted as expected.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156415228966.1064338.190189424190233355.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[dwg: Fix crash in qtest case where spapr->irq_map can be NULL at the
new assert()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When the machine is reset, the MSI bitmap is cleared but the allocated
MSIs are not freed. Some operating systems, such as AIX, can detect the
previous configuration and assert.
Empty the MSI cache, this performs the needed cleanup.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156415228410.1064338.4486161194061636096.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When freeing MSIs, we need to:
- remove them from the machine's MSI bitmap
- remove them from the IC backend
- remove them from the PHB's MSI cache
This is currently open coded in two places in rtas_ibm_change_msi(),
and we're about to need this in spapr_phb_reset() as well. Instead of
duplicating this code again, make it a destroy function for the PHB's
MSI cache. Removing an MSI device from the cache will call the destroy
function internally.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156415227855.1064338.5657793835271464648.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This has been useful to modify and test the Linux pseries suspend
code but it requires modification to the guest to call it (due to
being gated by other unimplemented features). It is not otherwise
used by Linux yet, but work is slowly progressing there.
This allows a (lightly modified) guest kernel to suspend with
`echo mem > /sys/power/state` and be resumed with system_wakeup
monitor command.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190722061752.22114-2-npiggin@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This implements the H_TPM_COMM hypercall, which is used by an
Ultravisor to pass TPM commands directly to the host's TPM device, or
a TPM Resource Manager associated with the device.
This also introduces a new virtual device, spapr-tpm-proxy, which
is used to configure the host TPM path to be used to service
requests sent by H_TPM_COMM hcalls, for example:
-device spapr-tpm-proxy,id=tpmp0,host-path=/dev/tpmrm0
By default, no spapr-tpm-proxy will be created, and hcalls will return
H_FUNCTION.
The full specification for this hypercall can be found in
docs/specs/ppc-spapr-uv-hcalls.txt
Since SVM-related hcalls like H_TPM_COMM use a reserved range of
0xEF00-0xEF80, we introduce a separate hcall table here to handle
them.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com
Message-Id: <20190717205842.17827-3-mdroth@linux.vnet.ibm.com>
[dwg: Corrected #include for upstream change]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This has been useful to modify and test the Linux pseries suspend
code but it requires modification to the guest to call it (due to
being gated by other unimplemented features). It is not otherwise
used by Linux yet, but work is slowly progressing there.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190718034214.14948-5-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This does not do directed yielding and is not quite as strict as PAPR
specifies in terms of precise dispatch behaviour. This generally will
mean suboptimal performance, rather than guest misbehaviour. Linux
does not rely on exact dispatch behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190718034214.14948-4-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
H_PROD is added, and H_CEDE is modified to test the prod bit
according to PAPR.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190718034214.14948-3-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement cpu_exec_enter/exit on ppc which calls into new methods of
the same name in PPCVirtualHypervisorClass. These are used by spapr
to implement the splpar VPA dispatch counter initially.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190718034214.14948-2-npiggin@gmail.com>
[dwg: Removed unnecessary CONFIG_USER_ONLY checks as suggested by gkurz]
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Free all SpaprOptionVector local pointers after use.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <156335160761.82682.11912058325777251614.stgit@lep8c.aus.stglabs.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
