qvirtqueue_setup() allocates the vring and virtqueue state. So far
there has been no function to free it. Callers have been using
guest_free() for the vring but forgot to free the QVirtQueue state.
This patch solves the memory leak by introducing qvirtqueue_cleanup().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The descriptor element, used, and avail vring structs are defined in
virtio_ring.h. There is no need to duplicate them in libqos virtio.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1462798061-30382-6-git-send-email-stefanha@redhat.com
Note that virtio_ring.h defines feature bits using their bit number:
#define VIRTIO_RING_F_INDIRECT_DESC 28
On the other hand libqos virtio.h uses the bit mask:
#define QVIRTIO_F_RING_INDIRECT_DESC 0x10000000
The patch makes the necessary adjustments.
I have used "1u << BITMASK" instead of "1ULL << BITMASK" because the
64-bit feature fields are not implemented in libqos virtio.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1462798061-30382-5-git-send-email-stefanha@redhat.com
Note that VIRTIO_F_ANY_LAYOUT and VIRTIO_F_NOTIFY_ON_EMPTY are bit
numbers in virtio_config.h but bit masks in qtest virtio.h. Therefore
it's necessary to change users from X to (1u << X).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1462798061-30382-4-git-send-email-stefanha@redhat.com
Avoid redefining device IDs. Use the standard Linux headers that are
already in the source tree.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1462798061-30382-2-git-send-email-stefanha@redhat.com
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move it to the actual users. There are some inclusions of
qemu/host-utils.h in headers, but they are all necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
Much of fw_cfg.h's contents is #ifndef NO_QEMU_PROTOS. This lets a
few places include it without satisfying the dependencies of the
suppressed code. If you somehow include it with NO_QEMU_PROTOS, any
future includes are ignored. Unnecessarily unclean.
Move the stuff not under NO_QEMU_PROTOS into its own header
fw_cfg_keys.h, and include it as appropriate. Tidy up the moved code
to please checkpatch.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qpci_pc_iomap() maps BARs one after the other, without padding. This
is wrong. PCI Local Bus Specification Revision 3.0, 6.2.5.1. Address
Maps: "all address spaces used are a power of two in size and are
naturally aligned". That's because the size of a BAR is given by the
number of address bits the device decodes, and the BAR needs to be
mapped at a multiple of that size to ensure the address decoding
works.
Fix qpci_pc_iomap() accordingly. This takes care of a FIXME in
ivshmem-test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-7-git-send-email-armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-17-git-send-email-peter.maydell@linaro.org
add ahci_exec, which is a standard purpose flexible command dispatcher
and tester for the AHCI device. The intent is to eventually cut down on
the absurd amount of boilerplate inside of the AHCI qtest.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-8-git-send-email-jsnow@redhat.com
These variants try to set a data offset, even if you don't specify one.
In the cases where the offset is zero and it's a nondata command, just
ignore the instruction.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-7-git-send-email-jsnow@redhat.com
As part of streamlining the AHCI tests interface, it'd be nice
if specying a size of zero could be handled without special branches
and the allocator could handle this special case gracefully.
This lets me use the "ahci_io" macros for non-data commands, too,
which moves me forward towards shepherding all AHCI qtests into
a common set of commands in a unified pipeline.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-6-git-send-email-jsnow@redhat.com
ATAPI commands are, unfortunately, weird in that they can
be either DMA or PIO depending on a header bit. In order to
accommodate them, I'll need to make AHCI command properties
mutable so we can toggle between which "flavor" of ATAPI command
we want to test.
The default ATAPI transfer mechanism is PIO and the default
properties are adjusted accordingly.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-5-git-send-email-jsnow@redhat.com
Add pathways to tolerate ATAPI commands.
Notably, unlike ATA, each SCSI command's layout is a little different,
so support will have to be patched in for each command as we want to
test them in e.g. ahci_command_set_sizes and ahci_command_set_offset.
For now, I'm adding support for 0x28, READ (10).
[Maintainer edit: replaced type-punning with stl_be_p(). --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1452282920-21550-3-git-send-email-jsnow@redhat.com
To allow tests to optionally exercise additional tests
that require the qemu-img tool that may not be present
in all builds.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447439479-16775-3-git-send-email-jsnow@redhat.com
This is using a ds1338 RTC chip on the I2C bus. This RTC chip is
not present on the real 3DS PDK board.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Acked-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 05601683a2a95c881cbc9f22651a044d969bd0ae.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't try to correct the endianness of NCQ commands, which do not
use any fields wider than a single byte.
This corrects the /x86_64/ahci/io/ncq/simple test (and others)
for ppc64 BE hosts.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1436210229-4118-2-git-send-email-jsnow@redhat.com
Test the NCQ pathways for a simple IO RW test.
Also, test that libqos doesn't explode when
running NCQ commands :)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-16-git-send-email-jsnow@redhat.com
NCQ commands are LBA48 by definition.
See SATA 3.2 13.6.4.1 "READ FPDMA QUEUED", or
SATA 3.2 13.6.5.1 "WRITE FPDMA QUEUED."
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-15-git-send-email-jsnow@redhat.com
NCQ commands have the concept of a "TAG" that they need to set,
but in the AHCI world, it is mandated that the TAG always match
the command slot that you executed the NCQ from.
See AHCI 9.3.1.1.5.2 "Native Queued Commands".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-14-git-send-email-jsnow@redhat.com
NCQ commands will expect the SDBS interrupt,
and in the normative case, do not expect to see
a D2H Register FIS unless something went wrong.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-13-git-send-email-jsnow@redhat.com
The wait command should check to make sure SACT is clear as well
as the Command Issue register.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-12-git-send-email-jsnow@redhat.com
NCQ frames are generated a little differently than
their non-NCQ cousins. Add support for them.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-11-git-send-email-jsnow@redhat.com
NCQ commands should not / do not update the byte count
in the command header post command, so this field is
meaningless for NCQ tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-10-git-send-email-jsnow@redhat.com
There's a handful of trivial bugs in the libqos/ahci functions,
squish them together.
- Zero cached pointers after freeing them
- The Command List Buffer is an array of 32x 32 byte structures, not
32x 8 byte pointers -- it's 1MiB, not 256 bytes. Zero it ALL.
- Free the correct command in ahci_pick_cmd.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1434470575-21625-4-git-send-email-jsnow@redhat.com
Where it makes sense, use the new faster primitives.
For generally small reads/writes such as for the PRDT
and FIS packets, stick with the more wasteful but
easier to debug memread/memwrite.
For ahci-test (before migration tests):
With this patch:
real 0m3.675s
user 0m2.582s
sys 0m1.718s
Without any qtest protocol improvements:
real 0m14.171s
user 0m12.072s
sys 0m12.527s
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1430864578-22072-6-git-send-email-jsnow@redhat.com
Write to one guest, migrate, and then read from the other.
adjust ahci_io to clear any buffers it creates, so that we
can use ahci_io safely on both guests knowing we are using
empty buffers and not accidentally re-using data.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-7-git-send-email-jsnow@redhat.com
libqos.c:
-set_context for addressing which commands go where
-migrate performs the actual migration
malloc.c:
- Structure of the allocator is adjusted slightly with
a second-tier malloc to make swapping around the allocators
easy when we "migrate" the lists from the source to the destination.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-4-git-send-email-jsnow@redhat.com
|| probably does not mean the same thing as |.
Additionally, allow users to submit a prd_size of 0
to indicate that they'd like to continue using the default.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-3-git-send-email-jsnow@redhat.com
Sometimes we want a command to halt the VM instead
of complete successfully, so it'd be nice to let the
libqos/ahci functions cope with such scenarios.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-2-git-send-email-jsnow@redhat.com
All of them were reported by codespell.
Most typos are in comments, one is in an error message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Test sector offset 0, 1, and the last sector(s)
in LBA28 and LBA48 modes.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1426274523-22661-3-git-send-email-jsnow@redhat.com
This will enable the testing of high offsets without
wasting a lot of disk space, and does not impact the
previous tests.
mkimg and mkqcow2 are added to libqos for other tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1426274523-22661-2-git-send-email-jsnow@redhat.com
The MSIX interrupt was always acked without checking its value, which caused a
race condition. If the ISR was raised between the read and the acking, the ISR
was never detected and it timed out.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Message-id: 1424795655-16952-1-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ahci_command_set_flags: Set additional flags in the command header.
ahci_command_clr_flags: Clear flags from the command header.
ahci_command_set_offset: Change the IO sector from 0.
ahci_command_adjust: Adjust many values simultaneously.
To be used to adjust the command header if the default values/guesses
were incorrect or undesirable.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[ kwolf: Fixed conflicting prototype for ahci_command_adjust() ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
