This patch adds and uses #defines for the remaining hardcoded PCI
device IDs. It also moves definitions taken from linux/pci_ids.h
into a separate header (hw/pci_ids.h), removes the 'RTL' from
PCI_DEVICE_ID_REALTEK_RTL8029, and renames PCI_DEVICE_ID_FSL_E500
to PCI_DEVICE_ID_MPC8533E to match Linux's definition.
Changes in v2:
* Don't use C99-style comments
* Move definitions from linux/pci_ids.h into a separate header
* Rename PCI_DEVICE_ID_FSL_E500 to PCI_DEVICE_ID_MPC8533E
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6841 c046a42c-6fe2-441c-8c8c-71466251a162
Hi all,
since vga_draw_graphic is only called by vga_hw_update when the console
associated with the graphic card is active, we don't need to check if
the current console is active using is_graphic_console.
I suspect I introduced these checks when the console switching mechanism
didn't work as it does now.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6840 c046a42c-6fe2-441c-8c8c-71466251a162
Hi all,
this patch adds a DisplayAllocator interface that allows display
frontends (sdl in particular) to provide a preallocated display buffer
for the graphical backend to use.
Whenever a graphical backend cannot use
qemu_create_displaysurface_from because its own internal pixel format
cannot be exported directly (text mode or graphical mode with color
depth 8 or 24), it creates another display buffer in memory using
qemu_create_displaysurface and does the conversion.
This new buffer needs to be blitted into the sdl surface buffer every time
we need to update portions of the screen.
We can avoid this using the DisplayAllocator interace: sdl provides its
own implementation of qemu_create_displaysurface, giving back the sdl
surface buffer directly (as we used to do before the DisplayState
changes).
Since the buffer returned by sdl could be in bgr format we need to put
back in the handlers of that case.
This approach is good if the two following conditions are true:
1) the sdl surface is a software surface that resides in main memory;
2) the host display color depth is either 16 or 32 bpp.
If first condition is false we can have bad performances using sdl
and vnc together.
If the second condition is false performances are certainly not going to
improve but they shouldn't get worse either.
The first condition is always true, at least on linux/X11 systems; but I
believe is true also on other platforms.
The second condition is true in the vast majority of the cases.
This patch should also have the good side effect of solving the sdl
2D slowness malc was reporting on MacOS, because SDL_BlitSurface is not
going to be called anymore when the guest is in text mode or 24bpp.
However the root problem is still present so I suspect we may
still see some slowness on MacOS when the guest is in 32 or 16 bpp.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6839 c046a42c-6fe2-441c-8c8c-71466251a162
From: Xiantao Zhang <xiantao.zhang@intel.com>
Date: Tue, 3 Mar 2009 13:33:13 +0800
Subject: [PATCH] Split ioapic logic from the current apic.
Add a new ioapic.c to hold ioapic's logic, and also
make it work for ia64.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
---
Makefile.target | 2 +-
hw/apic.c | 237 +++----------------------------------------------
hw/ioapic.c | 263 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
hw/pc.h | 5 +-
4 files changed, 281 insertions(+), 226 deletions(-)
create mode 100644 hw/ioapic.c
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6827 c046a42c-6fe2-441c-8c8c-71466251a162
When a scsi device is backed by a scsi generic device instead of an
ordinary host block device, the block API is abused in a couple of annoying
ways:
- nb_sectors is negative, and specifies a byte count instead of a sector count
- offset is ignored, since scsi-generic is essentially a packet protocol
This overloading makes hacking the block layer difficult. Remove it by
introducing a new explicit API for scsi-generic devices. The new API
is still backed by the old implementation, but at least the users are
insulated.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6822 c046a42c-6fe2-441c-8c8c-71466251a162
The new MMIO interface requires non-overlapping slots. Reorganize the
musicpal accordingly, fixing a regression for the Ethernet emulation.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6803 c046a42c-6fe2-441c-8c8c-71466251a162
Use firmware configuration device for boot device, kernel, initrd and
kernel command line parameters on PPC, Sparc32 and Sparc64.
Update OpenBIOS images to r479 which supports the change.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6777 c046a42c-6fe2-441c-8c8c-71466251a162
Eliminate "mmc0: SD card claims to support the incompletely defined 'low voltage
range'. This will be ignored." warning. Qemu says the card is a SD card, and SD
spec doesn't define low-voltage cards, so do now pretend to be one.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6772 c046a42c-6fe2-441c-8c8c-71466251a162
Fix remaining arm warnings - except for the mess in the NetWinder FP
emulator.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6766 c046a42c-6fe2-441c-8c8c-71466251a162
Found while cleaning up compiler warnings: GIC_*_LEVEL macros strongly
suggest that gic_irq_state.level is intended to be per-CPU and not just
a single, global bit. I'm unable to test the effect, but it seems to be
the most reasonable fix for the apparent brokenness.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6765 c046a42c-6fe2-441c-8c8c-71466251a162
Linux tries to poke the AGP bridge port and is pretty sad when it can't,
so let's activate the old code again and throw out the bit modifications,
as we don't really do anything with the values anyways.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6750 c046a42c-6fe2-441c-8c8c-71466251a162
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.
For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.
Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.
At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
Currently, waiting for the user to type in some password blocks the
whole VM because monitor_readline starts its own I/O loop. And this loop
also screws up reading passwords from virtual console.
Patch below fixes the shortcomings by using normal I/O processing also
for waiting on a password. To keep to modal property for the monitor
terminal, the command handler is temporarily replaced by a password
handler and a callback infrastructure is established to process the
result before switching back to command mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6710 c046a42c-6fe2-441c-8c8c-71466251a162
Reading the passwords for encrypted hard disks during early startup is
broken (I guess for quiet a while now):
- No monitor terminal is ready for input at this point
- Forcing all mux'ed terminals into monitor mode can confuse other
users of that channels
To overcome these issues and to lay the ground for a clean decoupling of
monitor terminals, this patch changes the initial password inquiry as
follows:
- Prevent autostart if there is some encrypted disk
- Once the user tries to resume the VM, prompt for all missing
passwords
- Only resume if all passwords were accepted
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6707 c046a42c-6fe2-441c-8c8c-71466251a162
SLES10 SP2 installer complains when probing a scsi disk and exits qemu
when failing to read one of the registers.
lsi_scsi: error: readb 0x15
--
Ryan Harper
Software Engineer; Linux Technology Center
IBM Corp., Austin, Tx
ryanh@us.ibm.com
diffstat output:
lsi53c895a.c | 2 ++
1 files changed, 2 insertions(+)
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
---
Subject: [PATCH] lsi: add ISTAT1 register read
From: Ryan Harper <ryanh@us.ibm.com>
Cc: kvm@vger.kernel.org
SLES10 SP2 installer complains when probing a scsi disk and exits qemu when
failing to read one of the registers.
lsi_scsi: error: readb 0x15
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6688 c046a42c-6fe2-441c-8c8c-71466251a162
Fix invalid access/crash when there is no IDE device or NET device.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Tested-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6673 c046a42c-6fe2-441c-8c8c-71466251a162
This patch add an emulation of MPC8544DS board.
It can work on All E500 platforms.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6663 c046a42c-6fe2-441c-8c8c-71466251a162
This patch add the emulation of freescale's pci controller for MPC85xx platform.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6661 c046a42c-6fe2-441c-8c8c-71466251a162
MPIC and OpenPIC have very similar design.
So a lot of code can be reused.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6659 c046a42c-6fe2-441c-8c8c-71466251a162
Initialize some variables to make GCC happy and switch from using index to
strchr. index is not available on Windows.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6653 c046a42c-6fe2-441c-8c8c-71466251a162
This is needed to dynamically add SLIC tables with Windows
activation keys.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6650 c046a42c-6fe2-441c-8c8c-71466251a162
After doing a video to video copy, cirrus_do_copy() in cirrus_vga.c does a
conditional call to cirrus_invalidate_region() with an "if (!notify)" test.
However at this point the blt has already been done so it seems like this call
should be made unconditionally. The patch below fixes some display update
problems when dragging windows under both X (fedora 10 guest) and a Windows XP
guest.
Signed-off-by: Brian Kress <kressb@moose.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6646 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6638 c046a42c-6fe2-441c-8c8c-71466251a162
No need to check for failing qemu_malloc anymore.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6626 c046a42c-6fe2-441c-8c8c-71466251a162
For STS register bit are cleared by writing 1 into it.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6624 c046a42c-6fe2-441c-8c8c-71466251a162
cirrus_do_copy() in hw/cirrus_vga.c seems to make some incorrect assumptions
about video memory layout. It tries to convert addresses to coordinates
assuming that one row of data is (width * depth) bytes long. The correct way
seems to be to use the pitch fields in the CirrusVGAState structure instead.
Without this patch, I get lots of screen corruption when I try to drag a window
under X as it's passing the wrong coordinates to the display surface for the
copy. With this patch I can drag a window with no screen corruption.
Signed-off-by: Brian Kress <kressb@moose.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6622 c046a42c-6fe2-441c-8c8c-71466251a162
Add monitor command to hot-add PCI devices (nic and storage).
Syntax is:
pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params
It returns the domain, bus and slot for the newly added device on success.
It is possible to attach a disk to a device after PCI initialization via
the drive_add command. If so, a manual scan of the SCSI bus on the guest
is necessary.
Save QEMUMachine necessary for drive_init.
Add monitor command to hot-remove devices, remove device data on _EJ0 notification.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162
This code parses full PCI device addresses. It then rejects domains
other than zero, because these are not supported in QEMU.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6609 c046a42c-6fe2-441c-8c8c-71466251a162
Enable the corresponding bit on the PCIST region and trigger the SCI
and handle the _EJ0 notifications.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6608 c046a42c-6fe2-441c-8c8c-71466251a162
Otherwise the PCI size for such regions can be calculated erroneously.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6604 c046a42c-6fe2-441c-8c8c-71466251a162
Unregister the pci device, unassign its IO and memory regions, and free
associated data.
Add a callback so drivers can free device state.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6603 c046a42c-6fe2-441c-8c8c-71466251a162
Record PCIDev on the BlockDriverState structure to locate for release
on hot-removal.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6597 c046a42c-6fe2-441c-8c8c-71466251a162
Change the PCI network drivers init functions to return the PCIDev, to
inform which slot has been hot-plugged.
Also record PCIDevice structure on NICInfo to locate for release on
hot-removal.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6593 c046a42c-6fe2-441c-8c8c-71466251a162
Add pci_find_bus/pci_find_device to be used by PCI hotplug.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6592 c046a42c-6fe2-441c-8c8c-71466251a162
Adds "msmouse" character device, which emulates a serial mouse.
Use it with -serial msmouse.
Signed-Off-By: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6559 c046a42c-6fe2-441c-8c8c-71466251a162
Support all kinds of pci vga cards (including none)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6557 c046a42c-6fe2-441c-8c8c-71466251a162
This patch changes the QEMUMachine init function not to take a
DisplayState as an argument because is not needed any more;
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6552 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes:
/scratch/froydnj/qemu.git/hw/tosa.c:176: warning: no previous prototype for 'tosa_dac_recv'
by making the function static.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6551 c046a42c-6fe2-441c-8c8c-71466251a162
Init the TMU and the ptimer with the correct cpu reset value
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6549 c046a42c-6fe2-441c-8c8c-71466251a162
fmopl.c was taken from MAME and doesn't include QEMU header files so we cannot
use qemu_malloc in it. It happens to build because C is a silly language.
Unfortunately, it doesn't play nicely with the QEMU headers so lets just revert
the changes that were made to it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6541 c046a42c-6fe2-441c-8c8c-71466251a162
Use the control virtqueue to allow the guest to enable and manipulate
a VLAN filter table. This allows us to drop more packets the guest
doesn't want to see. We define a new VLAN class for the control
virtqueue with commands ADD and DEL with usage defined in virtio-net.h.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6540 c046a42c-6fe2-441c-8c8c-71466251a162
Create a filter table and allow the guest to populate it with the
MAC class control commands. We manage the size and usage of the
filter table including enabling promiscuous and all-multi modes
as necessary. The guest should therefore assume the table is
infinite. Eventually this might allow us to bind directly to a
hardware NIC and manipulate a physical MAC filter.
The specifics of the TABLE_SET command are documented in
virtio-net.h. Separate buffers in the same command are used
for unicaste and multicast addresses for priority and
sychronization. With this we can export the VIRTIO_NET_F_CTRL_RX
feature bit.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6539 c046a42c-6fe2-441c-8c8c-71466251a162
Make use of the new RX_MODE control virtqueue class by dropping
packets the guest doesn't want to see.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6538 c046a42c-6fe2-441c-8c8c-71466251a162
Add a new RX_MODE control virtqueue class with commands PROMISC and
ALLMULTI and usage documented in virtio-net.h allowing the guest to
manipulate packet receiving options. We don't export a feature for
this until we also add the MAC filter table.
Note, for compatibility with older guest drivers we need to default
to promiscuous.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6537 c046a42c-6fe2-441c-8c8c-71466251a162
This will be used for RX mode, MAC table, VLAN table control, etc...
The control transaction consists of one or more "out" sg entries and
one or more "in" sg entries. The first out entry contains a header
defining the class and command. Additional out entries may provide
data for the command. A response via the ack entry is required
and the guest will typically be waiting for it.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6536 c046a42c-6fe2-441c-8c8c-71466251a162
Makes it much easier to search too.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6535 c046a42c-6fe2-441c-8c8c-71466251a162
Allow the guest to write to the MAC address config space and update
the network info string when it does. Rename get_config for symmetry.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6534 c046a42c-6fe2-441c-8c8c-71466251a162
The status register should probably be saved since its guest visible.
Also add a little bit if infrastructure for handling various save
revisions.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6533 c046a42c-6fe2-441c-8c8c-71466251a162
Use the new dma block helpers to perform dma disk I/O.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6525 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes a warning when compiling sh7750_regnames.c which is
caused by sh7750_regnames.h (which contains the prototype of regname())
not being included.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6504 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds and uses #defines for PCI device classes and subclases,
using a new pci_config_set_class() function, similar to the recently
added pci_config_set_vendor_id() and pci_config_set_device_id().
Change since v1: fixed compilation of hw/sun4u.c
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6491 c046a42c-6fe2-441c-8c8c-71466251a162
This patches allows powermac IDE interface to use DB-DMA.
This implementation uses only synchronous I/O.
Signed-off-by: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6489 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds powermac Descriptor-Based DMA.
It is used by mac-io based IDE, ethernet, sounds and serial devices.
Signed-off-by: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6488 c046a42c-6fe2-441c-8c8c-71466251a162
The bdrv layer uses a signed offset. Furthermore, block-raw-posix
only seeks when that offset is positive. Passing a negative offset
to block-raw-posix can result in data being written at the current
seek cursor's position.
It may be possible to exploit this to seek to the end of the disk
and extend the virtual disk by writing data to a negative sector
offset. After a reboot, this could lead to the guest having a
larger disk than it had before.
Close the hole by sanity checking the lba against the size of the
disk.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6475 c046a42c-6fe2-441c-8c8c-71466251a162
Current Linux guests oops if the host notifies of a
config change before a driver has been bound to the
device.
It's pretty pointless for us to do notify of config
changes before status is S_DRIVER_OK anyway, so let's
just not do it.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6471 c046a42c-6fe2-441c-8c8c-71466251a162
Paul Brook pointed out that the number of sectors reported
by the SCSI read capacity commands needs to be divided by
s->cluster_size, because bdrv_get_geometry reports the number
of 512 byte sectors, while emulated CDROMs report 2048 byte
sectors back to the guest.
This has no consequences for emulated hard disks, which use
a cluster size of 1.
aliguori: fixed typo
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6469 c046a42c-6fe2-441c-8c8c-71466251a162
Implement SCSI READ(16), WRITE(16) and SAI READ CAPACITY(16) commands,
so SCSI disks larger than 2TB can work with guests that support these
newer SCSI commands.
The cast to (uint64_t) is needed because otherwise gcc will use a
signed int, which gets sign extended into uint64_t lba, resulting
in bad block numbers for READ 10 and READ 16 with block numbers
larger than 2^31.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6468 c046a42c-6fe2-441c-8c8c-71466251a162
Sector numbers can overflow on a virtual scsi disk of over 1TB
in size. Qemu's bdrv_read expects an int64_t, so fix the overflow
by going to that data type.
On large disks, we clip the capacity to 2TB instead of returning
"capacity modulo 2TB".
Turn sector_count into an unsigned to prevent a signed/unsigned
overflow with SCSI transfers larger than 2TB. We're unlikely to
ever hit this bug, but fixing it is just one line.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6467 c046a42c-6fe2-441c-8c8c-71466251a162
Apparently this board was forgotten in the display changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6462 c046a42c-6fe2-441c-8c8c-71466251a162
The HPET emulation can disable the i8254 when the HPET is
in legacy mode, thus emulating the i8254's behavior.
But if it does, the i8254 doesn't have to be running, so
let's check to see if the timer works and not disable it
if it's not.
This fixes a segmentation fault when running Mac OS X as
guest os.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6460 c046a42c-6fe2-441c-8c8c-71466251a162
This fixes the warning:
/scratch/froydnj/qemu.git/hw/vga.c:1515: warning: redundant redeclaration of 'rgb_to_pixel_dup_table'
/scratch/froydnj/qemu.git/hw/vga.c:1248: warning: previous declaration of 'rgb_to_pixel_dup_table' was here
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6446 c046a42c-6fe2-441c-8c8c-71466251a162
Should solve 100% cpu ioport poll after reboot.
Signed-off-by: Dor Laor <dor@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6445 c046a42c-6fe2-441c-8c8c-71466251a162
This patch defines PCI vendor and device IDs in pci.h (matching those
from Linux's pci_ids.h), and uses those definitions where appropriate.
Change from v1:
Introduces pci_config_set_vendor_id() / pci_config_set_device_id()
accessors as suggested by Anthony Liguori.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162
A subsystem vendor ID of zero isn't allowed, so we use our
default ID.
Gerd points out that although the PCI subsystem vendor ID is
treated by the guest as the virtio vendor ID:
/* we use the subsystem vendor/device id as the virtio vendor/device
* id. this allows us to use the same PCI vendor/device id for all
* virtio devices and to identify the particular virtio driver by
* the subsytem ids */
vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
vp_dev->vdev.id.device = pci_dev->subsystem_device;
it looks like only the device ID is used right now:
# grep virtio modules.alias
alias virtio:d00000001v* virtio_net
alias virtio:d00000002v* virtio_blk
alias virtio:d00000003v* virtio_console
alias virtio:d00000004v* virtio-rng
alias virtio:d00000005v* virtio_balloon
alias pci:v00001AF4d*sv*sd*bc*sc*i* virtio_pci
alias virtio:d00000009v* 9pnet_virtio
so setting the subsystem vendor id to something != zero shouldn't cause
trouble.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6440 c046a42c-6fe2-441c-8c8c-71466251a162
Also use the existing macro for the PCI vendor ID
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6439 c046a42c-6fe2-441c-8c8c-71466251a162
Gerd added these macros a while back.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6438 c046a42c-6fe2-441c-8c8c-71466251a162
Linux changed its physical address location in the elf header from
0xc0000000 to 0 on 2.6.25, causing later kernels to fail booting
with the -kernel option.
This patch assures that the lowest segment in the elf binary is loaded
to KERNEL_LOAD_ADDR, which is where the firmware expects it.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6437 c046a42c-6fe2-441c-8c8c-71466251a162
Add resource registration both for P4 and A7.
This is needed because of #5935 SH4: Eliminate P4 to A7 mangling.
Additionally, {reg,iop,mem}base which is no longer used are removed.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6433 c046a42c-6fe2-441c-8c8c-71466251a162
On the MIPS Magnum, the time that is held in the RTC's NVRAM should be
relative to midnight on 1980-01-01. This patch adds an extra parameter
to rtc_init(), allowing different epochs to be used. For the Magnum,
1980 is specified, and for all other machines, 2000 is specified.
I've not modified the handling of the century byte, as with an epoch of
1980 and a year of 2009, one could argue that it should hold either
0, 1, 19 or 20. NT 3.50 on MIPS does not read the century byte.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6429 c046a42c-6fe2-441c-8c8c-71466251a162
This avoid crash when a bigger RAM size is requested (the devices are
mapped at 0x01000000).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6419 c046a42c-6fe2-441c-8c8c-71466251a162
Original text below.
Attached is a patch that changes how the emulated floppy controller replies to Sense Interrupt Status commands immediately after a controller reset. The specs state that after a Reset the 82078 goes into polling mode which needs four Sense Interrupt Status commands to be issued afterwards to clear the status of each drive. Currently we always respond to Sense Interrupt Status with a SEEK END instead of POLLING. This causes a problem with the SCO Openserver installer which is expects a POLLING state after reset. This patch returns a POLLING status for four Sense Interrupt Status requests immediately after a controller reset. This approach mirrors the way Bochs handles this situation. With the attached patch applied Openserver gets further when trying to load storage drivers from the floppy disk (blocked by another issue, patch on its way). I have successfully tested the floppy drive on the following OSs after applying this patch: Windows 98, Windows XP SP2, Linux x86 (SysRescCD 1.1.3 and Ubuntu 8.10).
Justin
Changelog:
Properly handle Sense Interrupt Status after FDC Reset
Signed-off-by: Justin Chevrier <theburner1@yahoo.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6416 c046a42c-6fe2-441c-8c8c-71466251a162
[ The following text is in the "UTF-8" character set. ]
[ Your display is set for the "koi8-r" character set. ]
[ Some characters may be displayed incorrectly. ]
This patch fixes vga rendering when the guest endianness differs from
the host endianness: in this case we can only share the buffer if the
bpp is 32 and we must change the pixelformat accordingly.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6413 c046a42c-6fe2-441c-8c8c-71466251a162
The vm state handler needed updating after the recent vm state change
notification refactoring.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6403 c046a42c-6fe2-441c-8c8c-71466251a162
Instead of copying to a temporary buffer, map guest memory for IDE DMA
transactions.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6398 c046a42c-6fe2-441c-8c8c-71466251a162
This version of the patch adds new option "werror" to -drive flag.
Possible values are:
report - report errors to a guest as IO errors
ignore - continue as if nothing happened
stop - stop VM on any error and retry last command on resume
enospc - stop vm on ENOSPC error and retry last command on resume
all other errors are reported to a guest.
Default is "report" to maintain current behaviour.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6388 c046a42c-6fe2-441c-8c8c-71466251a162
Switc vram unmapping in map_linear_vram to the simpler pattern used by
unmap_linear_vram.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6386 c046a42c-6fe2-441c-8c8c-71466251a162
We should not re-register the cirrus io-memory regions on each reset.
Moreover, this patch removes some dead code and pushes other static
field initializations from reset to init_common.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6385 c046a42c-6fe2-441c-8c8c-71466251a162
cirrus bitblt reset will stop and start dirty logging even when there is no
need; this causes full redraws.
avoid by only updating memory access when exiting cpu-to-video update mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6384 c046a42c-6fe2-441c-8c8c-71466251a162
Cleaned-up port from kvm-userspace: We have to stop any vram logging
while doing remaps. Otherwise the logger gets confused. This reward is
enormously accelerated cirrus vga in kvm mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6383 c046a42c-6fe2-441c-8c8c-71466251a162
Fix the broken text mode after reset by unmapping potentially mapped
vram.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6382 c046a42c-6fe2-441c-8c8c-71466251a162
It may lead to the issue when booting windows guests with acpi=1
if return the old pmsts.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6375 c046a42c-6fe2-441c-8c8c-71466251a162
And use it for the malta emulation. Fix segfault introduced in
revision 6352.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6365 c046a42c-6fe2-441c-8c8c-71466251a162
I noticed that pcnet_common_init() takes an unused 'info_str'
parameter, added in r2142. Since then, we always pass "pcnet"
to register_savevm() (and never "lance").
Note that r6218 changed vc->info_str to "lance" for sun4m emulation.
On the assumption that it's not needed, this patch removes the
parameter. If reverting the change in r2142, and registering with
"lance" would be preferable, I can submit a patch to do so.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6362 c046a42c-6fe2-441c-8c8c-71466251a162
I discovered a bug in the hpet code that caused Windows to boot without
hpet. The config mask I was using was preventing the guest from placing
the hpet into 32 bit mode.
(Beth Kon)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6357 c046a42c-6fe2-441c-8c8c-71466251a162
This patch improves G364 video card emulation (used in MIPS Magnum machine):
- Use memory dirty tracking to not refresh whole screen each time
- Use macros for debugging messages
- Add support for hardware cursor
- Handle Y-panning
- Raise irq at each screen redraw
- Support retrieving of some registers
- Add load/save support
The emulation has been tested in Linux 2.1 and Windows NT 3.5, in
640x480, 800x600, 1024x768 and 1280x1024 resolutions.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6356 c046a42c-6fe2-441c-8c8c-71466251a162
ppm_save's signature changed so it needs updating.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6350 c046a42c-6fe2-441c-8c8c-71466251a162
This is specific to OpenHackware, and not used by OpenBIOS.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6347 c046a42c-6fe2-441c-8c8c-71466251a162
this patch fixes the screendump functionality that was recently broken;
it must be applied *after* PATCH 5, 6 and 7 of the original displaystate
change patch series.
In fact the other patches make much easier to solve the screendump
problem because they make the console switching mechanism more robust.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6345 c046a42c-6fe2-441c-8c8c-71466251a162
Patch 5/7
This patch changes the graphical_console_init function to return an
allocated DisplayState instead of a QEMUConsole.
This patch contains just the graphical_console_init change and few other
modifications mainly in console.c and vl.c.
It was necessary to move the display frontends (e.g. sdl and vnc)
initialization after machine->init in vl.c.
This patch does *not* include any required changes to any device, these
changes come with the following patches.
Patch 6/7
This patch changes the QEMUMachine init functions not to take a
DisplayState as an argument because is not needed any more;
In few places the graphic hardware initialization function was called
only if DisplayState was not NULL, now they are always called.
Apart from these cases, the rest are all mechanical substitutions.
Patch 7/7
This patch updates the graphic device code to use the new
graphical_console_init function.
As for the previous patch, in few places graphical_console_init was called
only if DisplayState was not NULL, now it is always called.
Apart from these cases, the rest are all mechanical substitutions.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
r6322 introduced a warning pointed out by Jan Kiszka.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6342 c046a42c-6fe2-441c-8c8c-71466251a162
These are references to 'loglevel' that aren't on a simple 'if (loglevel &
X) qemu_log()' statement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6340 c046a42c-6fe2-441c-8c8c-71466251a162
