Implement blk_preadv_part() using generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-9-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Implement them using generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-8-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We need to add include/sysemu/block-backend-io.h to the inputs of the
block-gen.c target defined in block/meson.build.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-7-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
It does not mutate the buffer.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-6-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
For consistency with other I/O functions, and in preparation to
implement them using generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-5-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Swap 'buf' and 'bytes' around for consistency with
blk_co_{pread,pwrite}(), and in preparation to implement these functions
using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pread(blk, offset, buf, bytes, flags)
+ blk_pread(blk, offset, bytes, buf, flags)
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pwrite(blk, offset, buf, bytes, flags)
+ blk_pwrite(blk, offset, bytes, buf, flags)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-4-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
For consistency with other I/O functions, and in preparation to
implement it using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes; @@
- blk_pread(blk, offset, buf, bytes)
+ blk_pread(blk, offset, buf, bytes, 0)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-3-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Commit 1b7fd72955 ("block: rename buffer_alignment to
guest_block_size") noted:
At this point, the field is set by the device emulation, but completely
ignored by the block layer.
The last time the value of buffer_alignment/guest_block_size was
actually used was before commit 339064d506 ("block: Don't use guest
sector size for qemu_blockalign()").
This value has not been used since 2013. Get rid of it.
Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220518130945.2657905-1-stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two parts in this patch:
1, support akcipher service by cryptodev-builtin driver
2, virtio-crypto driver supports akcipher service
In principle, we should separate this into two patches, to avoid
compiling error, merge them into one.
Then virtio-crypto gets request from guest side, and forwards the
request to builtin driver to handle it.
Test with a guest linux:
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
- both public key & private key
- create/close session
- encrypt/decrypt/sign/verify basic driver operation
- also test with kernel crypto layer(pkey add/query)
All the cases work fine.
Run script in guest:
rm -rf *.der *.pem *.pfx
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=20
openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org"
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der
PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID
keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0
echo "Enc with priv key..."
keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
echo "Dec with pub key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Sign with priv key..."
keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
echo "Verify with pub key..."
keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
echo "Enc with pub key..."
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
echo "Dec with priv key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Verify with pub key..."
keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: lei he <helei.sig11@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Emulate a 3A5000 board use the new loongarch instruction.
3A5000 belongs to the Loongson3 series processors.
The board consists of a 3A5000 cpu model and the virt
bridge. The host 3A5000 board is really complicated and
contains many functions.Now for the tcg softmmu mode
only part functions are emulated.
More detailed info you can see
https://github.com/loongson/LoongArch-Documentation
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-31-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch decouples checkpoints and async events.
It was a tricky part of replay implementation. Now it becomes
much simpler and easier to maintain.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165364837856.688121.8785039478408995979.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vCPU execution should be suspended when new BH is scheduled.
This is needed to avoid guest timeouts caused by the long cycles
of the execution. In replay mode execution may hang when
vCPU sleeps and block event comes to the queue.
This patch adds notification which wakes up vCPU or interrupts
execution of guest code.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
--
v2: changed first_cpu to current_cpu (suggested by Richard Henderson)
v4: moved vCPU notification to aio_bh_enqueue (suggested by Paolo Bonzini)
Message-Id: <165364837317.688121.17680519919871405281.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "-display sdl" option still uses a hand-crafted parser for its
parameters since we didn't want to drag an interface we considered
somewhat flawed into the QAPI schema. Since the flaws are gone now,
it's time to QAPIfy.
This introduces the new "DisplaySDL" QAPI struct that is used to hold
the parameters that are unique to the SDL display. The only specific
parameter is currently "grab-mod" that is used to specify the required
modifier keys to escape from the mouse grabbing mode.
Message-Id: <20220519155625.1414365-3-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As part of converting -boot to a property with a QAPI type, define
the struct and use it throughout QEMU to access boot configuration.
machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by
hand, for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
used for async I/O.
- Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
=t5eR
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
used for async I/O.
- Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
# c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
# iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
# 4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
# Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
# 08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
# NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
# =t5eR
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 May 2022 05:52:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
virtio-scsi: move request-related items from .h to .c
virtio-scsi: clean up virtio_scsi_handle_cmd_vq()
virtio-scsi: clean up virtio_scsi_handle_ctrl_vq()
virtio-scsi: clean up virtio_scsi_handle_event_vq()
virtio-scsi: don't waste CPU polling the event virtqueue
virtio-scsi: fix ctrl and event handler functions in dataplane mode
util/event-loop-base: Introduce options to set the thread pool size
util/main-loop: Introduce the main loop into QOM
Introduce event-loop-base abstract class
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The thread pool regulates itself: when idle, it kills threads until
empty, when in demand, it creates new threads until full. This behaviour
doesn't play well with latency sensitive workloads where the price of
creating a new thread is too high. For example, when paired with qemu's
'-mlock', or using safety features like SafeStack, creating a new thread
has been measured take multiple milliseconds.
In order to mitigate this let's introduce a new 'EventLoopBase'
property to set the thread pool size. The threads will be created during
the pool's initialization or upon updating the property's value, remain
available during its lifetime regardless of demand, and destroyed upon
freeing it. A properly characterized workload will then be able to
configure the pool to avoid any latency spikes.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-4-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
'event-loop-base' provides basic property handling for all 'AioContext'
based event loops. So let's define a new 'MainLoopClass' that inherits
from it. This will permit tweaking the main loop's properties through
qapi as well as through the command line using the '-object' keyword[1].
Only one instance of 'MainLoopClass' might be created at any time.
'EventLoopBaseClass' learns a new callback, 'can_be_deleted()' so as to
mark 'MainLoop' as non-deletable.
[1] For example:
-object main-loop,id=main-loop,aio-max-batch=<value>
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-3-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce the 'event-loop-base' abstract class, it'll hold the
properties common to all event loops and provide the necessary hooks for
their creation and maintenance. Then have iothread inherit from it.
EventLoopBaseClass is defined as user creatable and provides a hook for
its children to attach themselves to the user creatable class 'complete'
function. It also provides an update_params() callback to propagate
property changes onto its children.
The new 'event-loop-base' class will live in the root directory. It is
built on its own using the 'link_whole' option (there are no direct
function dependencies between the class and its children, it all happens
trough 'constructor' magic). And also imposes new compilation
dependencies:
qom <- event-loop-base <- blockdev (iothread.c)
And in subsequent patches:
qom <- event-loop-base <- qemuutil (util/main-loop.c)
All this forced some amount of reordering in meson.build:
- Moved qom build definition before qemuutil. Doing it the other way
around (i.e. moving qemuutil after qom) isn't possible as a lot of
core libraries that live in between the two depend on it.
- Process the 'hw' subdir earlier, as it introduces files into the
'qom' source set.
No functional changes intended.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-2-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A global boolean variable "vga_interface_created"(declared in softmmu/globals.c)
has been used to track the creation of vga interface. If the vga flag is passed
in the command line "default_vga"(declared in softmmu/vl.c) variable is set to 0.
To warn user, the condition checks if vga_interface_created is false
and default_vga is equal to 0. If "-vga none" is passed, this patch will not warn the
user regarding the creation of VGA device.
The warning "A -vga option was passed but this
machine type does not use that option; no VGA device has been created"
is logged if vga flag is passed but no vga device is created.
This patch has been tested for x86_64, i386, sparc, sparc64 and arm boards.
Signed-off-by: Gautam Agrawal <gautamnagrawal@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/581
Message-Id: <20220501122505.29202-1-gautamnagrawal@gmail.com>
[thuth: Fix wrong warning with "-device" in some cases as reported by Paolo]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In a subsequent patch, VFIO will need to recognize if
a memory region owner is a TPM CRB device. Hence VFIO
needs to use TPM_IS_CRB() even if CONFIG_TPM is unset. So
let's add a stub function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linnux.ibm.com>
Link: https://lore.kernel.org/r/20220506132510.1847942-2-eric.auger@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It is only used by block/file-posix.c, move it there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Offset calculations are easy enough to get wrong. Let's add a few
variables to make moving around elf headers and data sections easier.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330123603.107120-6-frankja@linux.ibm.com>
Let's move from a boolean to a int variable which will later enable us
to store the number of sections that are in the dump file.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220330123603.107120-4-frankja@linux.ibm.com>
There's no need to have phdr_num and sh_info at the same time. We can
make phdr_num 32 bit and set PN_XNUM when we write the header if
phdr_num >= PN_XNUM.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220407094824.5074-1-frankja@linux.ibm.com>
The bug referenced in os-win32.h was fixed in mingw-w64 v6.
According to repology, version 5 used by ubuntu 18, which is
not yet out of support, so provide a meson link test for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-27-richard.henderson@linaro.org>
Below is the updated version of the patch adding debugging support to WHPX.
It incorporates feedback from Alex Bennée and Peter Maydell regarding not
changing the emulation logic depending on the gdb connection status.
Instead of checking for an active gdb connection to determine whether QEMU
should intercept the INT1 exceptions, it now checks whether any breakpoints
have been set, or whether gdb has explicitly requested one or more CPUs to
do single-stepping. Having none of these condition present now has the same
effect as not using gdb at all.
Message-Id: <0e7f01d82e9e$00e9c360$02bd4a20$@sysprogs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is only implemented for POSIX anyway.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-30-marcandre.lureau@redhat.com>
[Add braces around if statements. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For consistency with other os_ functions that do not have POSIX
implementation, declare an inline function for the stub in os-win32.h.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-27-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Along with other state tracking functions. Rename it for consistency.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-21-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No longer used after the previous patches.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220307070401.171986-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e0220bb5b2 made cpus.c target-agnostic but didn't notice
the cpu_list() function is only defined in target-specific code
in "cpu.h". Move list_cpus() declaration to "exec/cpu-common.h"
because this function is not softmmu-specific and can also be
used by user-mode, along with moving its implementation to cpu.c,
which is compiled per target.
Fixes: e0220bb5b2 ("softmmu: Build target-agnostic objects once")
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220314140108.26222-1-philippe.mathieu.daude@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We invoke the kvm_irqchip_commit_routes() for each addition to MSI route
table, which is not efficient if we are adding lots of routes in some cases.
This patch lets callers invoke the kvm_irqchip_commit_routes(), so the
callers can decide how to optimize.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg00967.html
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20220222141116.2091-3-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo suggested adding the new API to support route changes [1]. We should invoke
kvm_irqchip_begin_route_changes() before changing the routes, increasing the
KVMRouteChange.changes if the routes are changed, and commit the changes at last.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg02898.html
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20220222141116.2091-2-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
module_allow_arch() is the single target-specific call in the
whole vl.c file. Move the module initialization out to arch_init.c,
that way we'll be able to build vl.o once for all targets (the
next commit).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-21-f4bug@amsat.org>
Add cpus_are_resettable() to AccelOps, and implement it for the
KVM accelerator.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-12-f4bug@amsat.org>
Add cpu_thread_is_idle() to AccelOps, and implement it for the
KVM / WHPX accelerators.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-11-f4bug@amsat.org>
Mirror "sysemu/kvm.h" #ifdef'ry to define CONFIG_HAX_IS_POSSIBLE,
expose hax_allowed to hax_enabled() macro.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-9-f4bug@amsat.org>
kvm_on_sigbus() and kvm_on_sigbus_vcpu() prototypes don't have
to be target specific. Remove this limitation to be able to build
softmmu/cpus.c once for all targets.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-7-f4bug@amsat.org>
target_ulong is target-specific, while vaddr isn't.
Remove the unnecessary "exec/cpu-defs.h" target-speficic header
from "memory_mapping.h" and use the target-agnostic "hw/core/cpu.h"
locally in memory_mapping.c.
Remove "exec/memory.h" since MemoryRegion is forward-declared in
"qemu/typedefs.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-6-f4bug@amsat.org>
Assertions in the callers of the function pointrs are already
added by previous patches.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20220303151616.325444-30-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev functions run always under the BQL lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-21-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-10-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similarly to the previous patches, split block-backend.h
in block-backend-io.h and block-backend-global-state.h
In addition, remove "block/block.h" include as it seems
it is not necessary anymore, together with "qemu/iov.h"
block-backend-common.h contains the structures shared between
the two headers, and the functions that can't be categorized as
I/O or global state.
Assertions are added in the next patch.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-8-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The daemonizing functions in os-posix (os_daemonize() and
os_setup_post()) only daemonize the process if the static `daemonize`
variable is set. Right now, it can only be set by os_parse_cmd_args().
In order to use os_daemonize() and os_setup_post() from the storage
daemon to have it be daemonized, we need some other way to set this
`daemonize` variable, because I would rather not tap into the system
emulator's arg-parsing code. Therefore, this patch adds an
os_set_daemonize() function, which will return an error on os-win32
(because daemonizing is not supported there).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303164814.284974-2-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Following the bdrv_activate renaming, change also the name
of the respective callers.
bdrv_invalidate_cache_all -> bdrv_activate_all
blk_invalidate_cache -> blk_activate
test_sync_op_invalidate_cache -> test_sync_op_activate
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff(). Currently we keep the prototypes for these in
qemu-common.h, but most files don't need them. Move them to their
own header, a new include/sysemu/rtc.h.
Since the C files using these two functions did not need to include
qemu-common.h for any other reason, we can remove those include lines
when we add the include of the new rtc.h.
The license for the .h file follows that of the softmmu/rtc.c
where both the functions are defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since commit 292e13142d, dma_buf_rw() returns a MemTxResult type.
Do not discard it, return it to the caller. Pass the previously
returned value (the QEMUSGList residual size, which was rarely used)
as an optional argument.
With this new API, SCSIRequest::residual might now be accessed via
a pointer. Since the size_t type does not have the same size on
32 and 64-bit host architectures, convert it to a uint64_t, which
is big enough to hold the residual size, and the type is constant
on both 32/64-bit hosts.
Update the few dma_buf_read() / dma_buf_write() callers to the new
API.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220117125130.131828-1-f4bug@amsat.org>
Update the obvious places where dma_addr_t should be used
(instead of uint64_t, hwaddr, size_t, int32_t types).
This allows to have &dma_addr_t type portable on 32/64-bit
hosts.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220111184309.28637-11-f4bug@amsat.org>
In the next commit we will use the dma_addr_t type in the QEMUSGList
structure. Since currently dma_addr_t is defined after QEMUSGList,
move the declarations to have dma_addr_t defined first. This is a
pure code-movement patch.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111184309.28637-10-f4bug@amsat.org>
DMA API should not be included in user-mode emulation.
If so, build should fail. Remove the CONFIG_USER_ONLY check.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111184309.28637-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Remove drive_get_max_devs, as it is not used by anyone.
Last use was removed in commit 8f2d75e81d
("hw: Drop superfluous special checks for orphaned -drive").
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211215121140.456939-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_def is only a particular use case of
qemu_opts_parse_noisily, so it can be inlined.
Also remove drive_mark_claimed_by_board, as it is only defined
but not implemented (nor used) anywhere.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211215121140.456939-3-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove qemu_run_machine_init_done_notifiers() since no implementation
and user.
Fixes: f66dc8737c ("vl: move all generic initialization out of vl.c")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220104024136.1433545-1-xiaoyao.li@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
dma_memory_read() returns a MemTxResult type. Do not discard
it, return it to the caller.
Update the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-19-philmd@redhat.com>
dma_memory_write() returns a MemTxResult type. Do not discard
it, return it to the caller.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-18-philmd@redhat.com>
Let devices specify transaction attributes when calling ld*_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-17-philmd@redhat.com>
Let devices specify transaction attributes when calling st*_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-16-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_buf_read().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-13-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_buf_write().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-12-philmd@redhat.com>
DMA operations are run on any kind of buffer, not arrays of
uint8_t. Convert dma_buf_read/dma_buf_write functions to take
a void pointer argument and save us pointless casts to uint8_t *.
Remove this pointless casts in the megasas device model.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-9-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_map().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
- dma_memory_map(E1, E2, E3, E4)
+ dma_memory_map(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-7-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_rw().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-5-philmd@redhat.com>
We will add the MemTxAttrs argument to dma_memory_rw() in
the next commit. Since dma_memory_rw_relaxed() is only used
by dma_memory_rw(), modify it first in a separate commit to
keep the next commit easier to review.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-4-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_set().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-3-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_valid().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-2-philmd@redhat.com>
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmG5yEgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOFkwf9Glt3tnHfO/gWZectiMAjjM8vg3cR
yEsWU0fa0iu8MO8NiOW0b6DT0yosZ8rl2SYSZBQGqwa/Lq2MZLO2v0JG4LblBom7
WVmzNOG4t0OFoE2gwMlZ2J+ppaHV5zN1Yc6lMXOVQcefY0pXoyze+0Fq/cwKf2+p
6WDZTuOpjtxMwt9n71b93kNAHagk422MpNi1xi+o37hNsm/Zh3BTtaSJ7WCkCmWq
YmwwQZgyB/V0Ah42wchuf5zxEnQPMbjaQSu8jQU4iyCB7+2biBuh3Cqw5eR8tqC1
cGNINGlo2Orl9ASyEunHyuDj8p0wN8J37wNuBo4kghhrTVsVKQYF0wmsqw==
=U1Xy
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* improve compatibility for macOS scripts/entitlement.sh (Evan)
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
# gpg: Signature made Wed 15 Dec 2021 02:49:44 AM PST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [unknown]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
configure: remove dead variables
doc: Add the SGX numa description
numa: Support SGX numa in the monitor and Libvirt interfaces
numa: Enable numa for SGX EPC sections
kvm: add support for KVM_GUESTDBG_BLOCKIRQ
gdbstub, kvm: let KVM report supported singlestep flags
gdbstub: reject unsupported flags in handle_set_qemu_sstep
linux-headers: update to 5.16-rc1
virtio-gpu: do not byteswap padding
scripts/entitlement.sh: Use backward-compatible cp flags
qapi/machine.json: Fix incorrect description for die-id
tests/qtest: Add fuzz-lsi53c895a-test
hw/scsi/lsi53c895a: Do not abort when DMA requested and no data queued
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
The previous commits eliminated all uses. Drop the function.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-14-armbru@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[Extracted from Maxim's patch into a separate commit. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211111110604.207376-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBUeEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOh+Qf+OMRhRiv6dYjbK/5zXrx81AgxYAY3
dBUSr8v16LyrMl1U3DZWzhD+MzQsC83m/Xsh4lGxlHDWtkK9QQA5xDG95JZdY26i
MGCbbjnFHISbyBQV9Y724gPfPjOOODuoFbzafSx6VLITOcyv1ye0cm7TOjOPB+tt
E4c3JqTZ7g8a5yMe8ItkVhz5pPY+oVw8dxMNRp6Sup5Dbfx0DjacIwLasLsHfPL7
qBADfqB20ovHUzLjXu7oWgEd4KxJ6kiSCaJJu/KD36hg0wB8+WVP1o43j4PkczHT
QjU7eZaeaTrN5Cf34ttPge6QReMi5SFNCaA9O9/HLqrQgdEtt/diZWuqjQ==
=a2mC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Build system fixes and cleanups
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
# gpg: Signature made Tue 02 Nov 2021 10:57:37 AM EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* remotes/bonzini/tags/for-upstream: (27 commits)
configure: fix --audio-drv-list help message
configure: Remove the check for the __thread keyword
Move the l2tpv3 test from configure to meson.build
meson: remove unnecessary coreaudio test program
meson: remove pointless warnings
meson.build: Allow to disable OSS again
meson: bump submodule to 0.59.3
qtest/am53c974-test: add test for cancelling in-flight requests
esp: ensure in-flight SCSI requests are always cancelled
KVM: SVM: add migration support for nested TSC scaling
hw/i386: fix vmmouse registration
watchdog: remove select_watchdog_action
vl: deprecate -watchdog
watchdog: add information from -watchdog help to -device help
hw/i386: Rename default_bus_bypass_iommu
hvf: Avoid mapping regions < PAGE_SIZE as ram
configure: do not duplicate CPU_CFLAGS into QEMU_LDFLAGS
configure: remove useless NPTL probe
target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types
optionrom: add a DMA-enabled multiboot ROM
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of invoking select_watchdog_action from both HMP and command line,
go directly from HMP to QMP and use QemuOpts as the intermediary for the
command line.
This makes -watchdog-action explicitly a shortcut for "-action watchdog",
so that "-watchdog-action" and "-action watchdog" override each other
based on the position on the command line; previously, "-action watchdog"
always won.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
dirty_pages is used to calculate dirtyrate via dirty ring, when
enabled, kvm-reaper will increase the dirty pages after gfns
being dirtied.
kvm_dirty_ring_enabled shows if kvm-reaper is working. dirtyrate
thread could use it to check if measurement can base on dirty
ring feature.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <fee5fb2ab17ec2159405fc54a3cff8e02322f816.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_fdt_add_path() works like qemu_fdt_add_subnode(), except it
also adds all missing subnodes from the given path. We'll use it
in a coming patch where we will add cpu-map to the device tree.
And we also tweak an error message of qemu_fdt_add_subnode().
Co-developed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211020142125.7516-3-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make bytes argument int64_t to be consistent with modern block-layer.
Callers should be OK with it as type becomes wider.
What is inside functions?
- Conversion from int64_t to size_t. Still, we
can't have a buffer larger than SIZE_MAX, therefore bytes should not be
larger than SIZE_MAX as well. Add an assertion.
- Passing to blk_co_pwritev() / blk_co_preadv() which already has
int64_t bytes argument.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211007175243.642516-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: spelling fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
We already have this marker for the blk_co_flush function declaration in
block/block-backend.c. Add it in the header too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211007175243.642516-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: wording tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
1. Convert bytes in BlkAioEmAIOCB:
aio->bytes is only passed to already int64_t interfaces, and set in
blk_aio_prwv, which is updated here.
2. For all updated functions the parameter type becomes wider so callers
are safe.
3. In blk_aio_prwv we only store bytes to BlkAioEmAIOCB, which is
updated here.
4. Other updated functions are wrappers on blk_aio_prwv.
Note that blk_aio_preadv and blk_aio_pwritev become safer: before this
commit, it's theoretically possible to pass qiov with size exceeding
INT_MAX, which than converted to int argument of blk_aio_prwv. Now it's
converted to int64_t which is a lot better. Still add assertions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak assertion and grammar]
Signed-off-by: Eric Blake <eblake@redhat.com>
Function is updated so that parameter type becomes wider, so all
callers should be OK with it.
Look at blk_co_copy_range() itself: bytes is passed only to
blk_check_byte_request() and bdrv_co_copy_range(), which already have
int64_t bytes parameter, so we are OK.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-10-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Convert blk_pdiscard, blk_pwrite_compressed, blk_pwrite_zeroes.
These are just wrappers for functions with int64_t argument, so allow
passing int64_t as well. Parameter type becomes wider so all callers
should be OK with it.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Note also that we don't (and are not going to) convert blk_pwrite and
blk_pread: these functions return number of bytes on success, so to
update them, we should change return type to int64_t as well, which
will lead to investigating and updating all callers which is too much.
So, blk_pread and blk_pwrite remain unchanged.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-9-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
We updated blk_do_pdiscard() and its wrapper blk_co_pdiscard(). Both
functions are updated so that the parameter type becomes wider, so all
callers should be OK with it.
Look at blk_do_pdiscard(): bytes is passed only to
blk_check_byte_request() and bdrv_co_pdiscard(), which already have
int64_t bytes parameter, so we are OK.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
We convert blk_do_pwritev_part() and some wrappers:
blk_co_pwritev_part(), blk_co_pwritev(), blk_co_pwrite_zeroes().
All functions are converted so that the parameter type becomes wider, so
all callers should be OK with it.
Look at blk_do_pwritev_part() body:
bytes is passed to:
- trace_blk_co_pwritev (we update it here)
- blk_check_byte_request, throttle_group_co_io_limits_intercept,
bdrv_co_pwritev_part - all already have int64_t argument.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
For both updated functions, the type of bytes becomes wider, so all callers
should be OK with it.
blk_co_preadv() only passes its arguments to blk_do_preadv().
blk_do_preadv() passes bytes to:
- trace_blk_co_preadv, which is updated too
- blk_check_byte_request, throttle_group_co_io_limits_intercept,
bdrv_co_preadv, which are already int64_t.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
"sysemu/sev.h" is only used from x86-specific files. Let's move it
to include/hw/i386, and merge it with target/i386/sev.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007161716.453984-16-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
sources, IOV_MAX in POSIX). Because of this, on some host adapters
requests with many iovecs are rejected with -EINVAL by the
io_submit() or readv()/writev() system calls.
In fact, the same limit applies to SG_IO as well. To fix both the
EINVAL and the possible performance issues from using fewer iovecs
than allowed by Linux (some HBAs have max_segments as low as 128),
introduce a separate entry in BlockLimits to hold the max_segments
value from sysfs. This new limit is used only for SG_IO and clamped
to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
bs->bl.max_transfer.
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Provide a name field for all the memory listeners. It can be used to identify
which memory listener is which.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210817013553.30584-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sleep on WFI until the VTIMER is due but allow ourselves to be woken
up on IPI.
In this implementation IPI is blocked on the CPU thread at startup and
pselect() is used to atomically unblock the signal and begin sleeping.
The signal is sent unconditionally so there's no need to worry about
races between actually sleeping and the "we think we're sleeping"
state. It may lead to an extra wakeup but that's better than missing
it entirely.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210916155404.86958-6-agraf@csgraf.de
[agraf: Remove unused 'set' variable, always advance PC on WFX trap,
support vm stop / continue operations and cntv offsets]
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With Apple Silicon available to the masses, it's a good time to add support
for driving its virtualization extensions from QEMU.
This patch adds all necessary architecture specific code to get basic VMs
working, including save/restore.
Known limitations:
- WFI handling is missing (follows in later patch)
- No watchpoint/breakpoint support
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-5-agraf@csgraf.de
[PMM: added missing #include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need to install a migration helper for the ARM hvf backend.
Let's introduce an arch callback for the overall hvf init chain to
do so.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-4-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Userland targers will otherwise use a poisoned CONFIG_NVMM
Signed-off-by: Reinoud Zandijk <Reinoud@NetBSD.org>
Message-Id: <20210718134650.1191-2-reinoud@NetBSD.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add function to change bs inside blk.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We added a stub for the arch_type global in commit 5964ed56d9 so
that we could compile blockdev.c into the tools. However, in commit
9db1d3a2be we removed the only use of arch_type from blockdev.c.
The stub is therefore no longer needed, and we can delete it again,
together with the QEMU_ARCH_NONE value that only the stub was using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-9-peter.maydell@linaro.org
The QEMU_ARCH_VIRTIO_* defines are used only in one file,
qdev-monitor.c. Move them to that file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20210730105947.28215-7-peter.maydell@linaro.org
When Hexagon was added we forgot to add it to the QEMU_ARCH_*
enumeration. This doesn't cause a visible effect because at the
moment Hexagon is linux-user only and the QEMU_ARCH_* constants are
only used in softmmu, but we might as well add it in, since it's the
only architecture currently missing from the list.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20210730105947.28215-6-peter.maydell@linaro.org
The kvm_available() function reports whether KVM support was
compiled into the QEMU binary; it returns the value of the
CONFIG_KVM define.
The only place in the codebase where we use this function is
in qmp_query_kvm(). Now that accelerators are based on QOM
classes we can instead use accel_find("kvm") and remove the
kvm_available() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-3-peter.maydell@linaro.org
The xen_available() function is used only to produce an error
for some Xen-specific command line options in QEMU binaries where
Xen support was not compiled in: it just returns the value of
the CONFIG_XEN define.
Now that accelerators are QOM classes, we can check for
"does this binary have Xen compiled in" with accel_find("xen"),
and drop the xen_available() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-2-peter.maydell@linaro.org
The `aio-max-batch` parameter will be propagated to AIO engines
and it will be used to control the maximum number of queued requests.
When there are in queue a number of requests equal to `aio-max-batch`,
the engine invokes the system call to forward the requests to the kernel.
This parameter allows us to control the maximum batch size to reduce
the latency that requests might accumulate while queued in the AIO
engine queue.
If `aio-max-batch` is equal to 0 (default value), the AIO engine will
use its default maximum batch size value.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For block host devices, I/O can happen through either the kernel file
descriptor I/O system calls (preadv/pwritev, io_submit, io_uring)
or the SCSI passthrough ioctl SG_IO.
In the latter case, the size of each transfer can be limited by the
HBA, while for file descriptor I/O the kernel is able to split and
merge I/O in smaller pieces as needed. Applying the HBA limits to
file descriptor I/O results in more system calls and suboptimal
performance, so this patch splits the max_transfer limit in two:
max_transfer remains valid and is used in general, while max_hw_transfer
is limited to the maximum hardware size. max_hw_transfer can then be
included by the scsi-generic driver in the block limits page, to ensure
that the stricter hardware limit is used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's provide a way to control the use of RAM_NORESERVE via memory
backends using the "reserve" property which defaults to true (old
behavior).
Only Linux currently supports clearing the flag (and support is checked at
runtime, depending on the setting of "/proc/sys/vm/overcommit_memory").
Windows and other POSIX systems will bail out with "reserve=false".
The target use case is virtio-mem, which dynamically exposes memory
inside a large, sparse memory area to the VM. This essentially allows
avoiding to set "/proc/sys/vm/overcommit_memory == 0") when using
virtio-mem and also supporting hugetlbfs in the future.
As really only Linux implements RAM_NORESERVE right now, let's expose
the property only with CONFIG_LINUX. Setting the property to "false"
will then only fail in corner cases -- for example on very old kernels
or when memory overcommit was completely disabled by the admin.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-11-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is only one caller, and shortly we will need access
to the MachineState, which tcg_init_machine already has.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need more than a single field for hvf going forward. To keep
the global vcpu struct uncluttered, let's allocate a special hvf vcpu
struct, similar to how hax does it.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-12-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can move the definition of hvf_vcpu_exec() into our internal
hvf header, obsoleting the need for hvf-accel-ops.h.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-11-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch splits the vcpu init and destroy functions into a generic and
an architecture specific portion. This also allows us to move the generic
functions into the generic hvf code, removing exported functions.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-8-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The hvf_set_phys_mem() function is only called within the same file.
Make it static.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-6-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves a few internal struct and constant defines over.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-5-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves CPU and memory operations over. While at it, make sure
the code is consumable on non-i386 systems.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-4-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves assert_hvf_ok() and introduces generic build infrastructure.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-2-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow block backends to poll their devices/users to check if they have
been quiesced when entering a drained section.
This will be used in the next patch to wait for the NBD server to be
completely quiesced.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20210602060552.17433-2-slp@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cache it too because we'll reference it more frequently in the future.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-8-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_physical_sync_dirty_bitmap() calculates the ramblock offset in an
awkward way from the MemoryRegionSection that passed in from the
caller. The truth is for each KVMSlot the ramblock offset never
change for the lifecycle. Cache the ramblock offset for each KVMSlot
into the structure when the KVMSlot is created.
With that, we can further simplify kvm_physical_sync_dirty_bitmap()
with a helper to sync KVMSlot dirty bitmap to the ramblock dirty
bitmap of a specific KVMSlot.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-6-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a helper kvm_slot_get_dirty_log() to make the function
kvm_physical_sync_dirty_bitmap() clearer. We can even cache the as_id
into KVMSlot when it is created, so that we don't even need to pass it
down every time.
Since at it, remove return value of kvm_physical_sync_dirty_bitmap()
because it should never fail.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per-kml slots_lock will bring some trouble if we want to take all slots_lock of
all the KMLs, especially when we're in a context that we could have taken some
of the KML slots_lock, then we even need to figure out what we've taken and
what we need to take.
Make this simple by merging all KML slots_lock into a single slots lock.
Per-kml slots_lock isn't anything that helpful anyway - so far only x86 has two
address spaces (so, two slots_locks). All the rest archs will be having one
address space always, which means there's actually one slots_lock so it will be
the same as before.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are already poisoning CONFIG_KVM since this switch is not working
in common code. Do the same with the other accelerator switches, too
(except for CONFIG_TCG, which is special, since it is also defined in
config-host.h).
Message-Id: <20210414112004.943383-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Target unicore32 was deprecated in commit 8e4ff4a8d2, v5.2.0. See
there for rationale.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-3-armbru@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
There are no known users of this CPU anymore, and there are no
binaries available online which could be used for regression tests,
so the code has likely completely bit-rotten already. It's been
marked as deprecated since two releases now and nobody spoke up
that there is still a need to keep it, thus let's remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210430160355.698194-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Commit message typos fixed, trivial conflicts resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Both os-win32.h and os-posix.h include system header files. Instead
of having osdep.h include them inside its 'extern "C"' block, make
these headers handle that themselves, so that we don't include the
system headers inside 'extern "C"'.
This doesn't fix any current problems, but it's conceptually the
right way to handle system headers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Similarly to 5f629d943c ("s390x: fix s390 virtio aliases"),
define the virtio aliases.
This allows to start machines with virtio devices without
knowledge of the implementation type.
For instance, we can use "-device virtio-scsi" on
m68k, s390x or PC, and the device will be respectively
"virtio-scsi-device", "virtio-scsi-ccw" or "virtio-scsi-pci".
This already exists for s390x and -ccw interfaces, add them
for m68k and MMIO (-device) interfaces.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-3-laurent@vivier.eu>
Message-Id: <20210323165308.15244-18-alex.bennee@linaro.org>
This is used to define virtio-*-pci and virtio-*-ccw aliases
rather than substracting the CCW architecture from all the others.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210319202335.2397060-2-laurent@vivier.eu>
Message-Id: <20210323165308.15244-17-alex.bennee@linaro.org>
Drop the crap deprecated in commit a1b40bda08 "blockdev: Deprecate
-drive with bogus interface type" (v5.1.0).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-5-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
As the last user is gone, we can get rid of phys_mem_set_alloc() and
simplify.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210303130916.22553-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently get_naturally_aligned_size() is used by the intel iommu
to compute the maximum invalidation range based on @size which is
a power of 2 while being aligned with the @start address and less
than the maximum range defined by @gaw.
This helper is also useful for other iommu devices (virtio-iommu,
SMMUv3) to make sure IOMMU UNMAP notifiers only are called with
power of 2 range sizes.
Let's move this latter into dma-helpers.c and rename it into
dma_aligned_pow2_mask(). Also rewrite the helper so that it
accomodates UINT64_MAX values for the size mask and max mask.
It now returns a mask instead of a size. Change the caller.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 20210309102742.30442-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A string array in device tree is simply a series of \0 terminated
strings next to each other. As libfdt doesn't support that directly
we need to build it ourselves.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210303173642.3805-4-alex.bennee@linaro.org>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
runstate_check() returns a boolean. runstate_is_running()
returns what runstate_check() returns, also a boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210111152020.1422021-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Record/replay provides REPLAY_CLOCK_LOCKED macro to access
the clock when vm_clock_seqlock is locked. This macro is
needed because replay internals operate icount. In locked case
replay use icount_get_raw_locked for icount request, which prevents
excess locking which leads to deadlock. But previously only
record code used *_locked function and replay did not.
Therefore sometimes clock access lead to deadlocks.
This patch fixes clock access for replay too and uses *_locked
icount access function.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161347990483.1313189.8371838968343494161.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An SEV-ES guest does not allow register state to be altered once it has
been measured. When an SEV-ES guest issues a reboot command, Qemu will
reset the vCPU state and resume the guest. This will cause failures under
SEV-ES. Prevent that from occuring by introducing an arch-specific
callback that returns a boolean indicating whether vCPUs are resettable.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <1ac39c441b9a3e970e9556e1cc29d0a0814de6fd.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SEV-ES is enabled, it is not possible modify the guests register
state after it has been initially created, encrypted and measured.
Normally, an INIT-SIPI-SIPI request is used to boot the AP. However, the
hypervisor cannot emulate this because it cannot update the AP register
state. For the very first boot by an AP, the reset vector CS segment
value and the EIP value must be programmed before the register has been
encrypted and measured. Search the guest firmware for the guest for a
specific GUID that tells Qemu the value of the reset vector to use.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <22db2bfb4d6551aed661a9ae95b4fdbef613ca21.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OVMF is developing a mechanism for depositing a GUIDed table just
below the known location of the reset vector. The table goes
backwards in memory so all entries are of the form
<data>|len|<GUID>
Where <data> is arbtrary size and type, <len> is a uint16_t and
describes the entire length of the entry from the beginning of the
data to the end of the guid.
The foot of the table is of this form and <len> for this case
describes the entire size of the table. The table foot GUID is
defined by OVMF as 96b582de-1fb2-45f7-baea-a366c55a082d and if the
table is present this GUID is just below the reset vector, 48 bytes
before the end of the firmware file.
Add a parser for the ovmf reset block which takes a copy of the block,
if the table foot guid is found, minus the footer and a function for
later traversal to return the data area of any specified GUIDs.
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210204193939.16617-2-jejb@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Defines MPQemuMsg, which is the message that is sent to the remote
process. This message is sent over QIOChannel and is used to
command the remote process to perform various tasks.
Define transmission functions used by proxy and by remote.
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 56ca8bcf95195b2b195b08f6b9565b6d7410bce5.1611938319.git.jag.raman@oracle.com
[Replace struct iovec send[2] = {0} with {} to make clang happy as
suggested by Peter Maydell <peter.maydell@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows failures to be reported richly and idiomatically.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Currently the "memory-encryption" property is only looked at once we
get to kvm_init(). Although protection of guest memory from the
hypervisor isn't something that could really ever work with TCG, it's
not conceptually tied to the KVM accelerator.
In addition, the way the string property is resolved to an object is
almost identical to how a QOM link property is handled.
So, create a new "confidential-guest-support" link property which sets
this QOM interface link directly in the machine. For compatibility we
keep the "memory-encryption" property, but now implemented in terms of
the new property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
When AMD's SEV memory encryption is in use, flash memory banks (which are
initialed by pc_system_flash_map()) need to be encrypted with the guest's
key, so that the guest can read them.
That's abstracted via the kvm_memcrypt_encrypt_data() callback in the KVM
state.. except, that it doesn't really abstract much at all.
For starters, the only call site is in code specific to the 'pc'
family of machine types, so it's obviously specific to those and to
x86 to begin with. But it makes a bunch of further assumptions that
need not be true about an arbitrary confidential guest system based on
memory encryption, let alone one based on other mechanisms:
* it assumes that the flash memory is defined to be encrypted with the
guest key, rather than being shared with hypervisor
* it assumes that that hypervisor has some mechanism to encrypt data into
the guest, even though it can't decrypt it out, since that's the whole
point
* the interface assumes that this encrypt can be done in place, which
implies that the hypervisor can write into a confidential guests's
memory, even if what it writes isn't meaningful
So really, this "abstraction" is actually pretty specific to the way SEV
works. So, this patch removes it and instead has the PC flash
initialization code call into a SEV specific callback.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
This will allow us to centralize the registration of
the cpus.c module accelerator operations (in accel/accel-softmmu.c),
and trigger it automatically using object hierarchy lookup from the
new accel_init_interfaces() initialization step, depending just on
which accelerators are available in the code.
Rename all tcg-cpus.c, kvm-cpus.c, etc to tcg-accel-ops.c,
kvm-accel-ops.c, etc, matching the object type names.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-18-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently, blk_is_read_only() tells whether a given BlockBackend can
only be used in read-only mode because its root node is read-only. Some
callers actually try to answer a slightly different question: Is the
BlockBackend configured to be writable, by taking write permissions on
the root node?
This can differ, for example, for CD-ROM devices which don't take write
permissions, but may be backed by a writable image file. scsi-cd allows
write requests to the drive if blk_is_read_only() returns false.
However, the write request will immediately run into an assertion
failure because the write permission is missing.
This patch introduces separate functions for both questions.
blk_supports_write_perm() answers the question whether the block
node/image file can support writable devices, whereas blk_is_writable()
tells whether the BlockBackend is currently configured to be writable.
All calls of blk_is_read_only() are converted to one of the two new
functions.
Fixes: https://bugs.launchpad.net/bugs/1906693
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210118123448.307825-2-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Only leave the external interface in sysemu/whpx.h. whpx_apic_in_platform
is moved to a .c file because it needs whpx_state.
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201219090637.1700900-3-pbonzini@redhat.com>
Plumb the value through to alloc_code_gen_buffer. This is not
supported by any os or tcg backend, so for now enabling it will
result in an error.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current default action of pausing a guest after a panic event
is received leaves the responsibility to resume guest execution to the
management layer. The reasons for this behavior are discussed here:
https://lore.kernel.org/qemu-devel/52148F88.5000509@redhat.com/
However, in instances like the case of older guests (Linux and
Windows) using a pvpanic device but missing support for the
PVPANIC_CRASHLOADED event, and Windows guests using the hv-crash
enlightenment, it is desirable to allow the guests to continue
running after sending a PVPANIC_PANICKED event. This allows such
guests to proceed to capture a crash dump and automatically reboot
without intervention of a management layer.
Add an option to avoid stopping a VM after a panic event is received,
by passing:
-action panic=none
in the command line arguments, or during runtime by using an upcoming
QMP command.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-3-git-send-email-alejandro.j.jimenez@oracle.com>
[Do not fix panic action in the variable, instead modify -no-shutdown. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a QMP command to allow for the behaviors specified by the
-no-reboot and -no-shutdown command line option to be set at runtime.
The new command is named set-action and takes optional arguments, named
after an event, that provide a corresponding action to take.
Example:
-> { "execute": "set-action",
"arguments": {
"reboot": "none",
"shutdown": "poweroff",
"watchdog": "debug" } }
<- { "return": {} }
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-4-git-send-email-alejandro.j.jimenez@oracle.com>
[Split the series differently, with -action based on the QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Machine options can be retrieved as properties of the machine object.
Encourage that by removing the "easy" accessor to machine options.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
machine_init_done is not the right flag to check when preconfig
is taken into account; for example "./qemu-system-x86_64 -serial
mon:stdio -preconfig" does not print the QEMU monitor header until after
exit_preconfig. Add back a custom bool for mux character devices. This
partially undoes commit c7278b4355 ("chardev: introduce chr_machine_done
hook", 2018-03-12), but it keeps the cleaner logic using a function
pointer in ChardevClass.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move post-preconfig initialization to the x-exit-preconfig. If preconfig
is not requested, just exit preconfig mode immediately with the QMP
command.
As a result, the preconfig loop will run with accel_setup_post
and os_setup_post restrictions (xen_restrict, chroot, etc.)
already done.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD SEV allows a guest owner to inject a secret blob
into the memory of a virtual machine. The secret is
encrypted with the SEV Transport Encryption Key and
integrity is guaranteed with the Transport Integrity
Key. Although QEMU facilitates the injection of the
launch secret, it cannot access the secret.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20201027170303.47550-1-tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
serial_hd(i) is NULL if and only if i >= serial_max_hds(). Test
serial_hd(i) instead of bounding the loop at serial_max_hds(),
thus removing one more function that vl.c is expected to export.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bios_name was a legacy variable used by machine code, but it is
no more.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026143028.3034018-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
dma_memory_rw_relaxed() returns a MemTxResult type.
Do not discard it, return it to the caller.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-8-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
dma_memory_rw_relaxed() returns a MemTxResult type.
Do not discard it, return it to the caller.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_rw() returns a MemTxResult type.
Do not discard it, return it to the caller.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_write() returns a MemTxResult type.
Do not discard it, return it to the caller.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add documentation based on address_space_map / address_space_unmap.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support the kernel-irqchip option for
WHPX with on or off value. 'split' value is not supported
for the option. The option only works for the latest version
of Windows (ones that are coming out on Insiders). The
change maintains backward compatibility on older version of
Windows where this option is not supported.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880B13258DA9251F8459F4DC0170@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023123516.19843-1-chetan4windows@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201014133722.14041-1-chetan4windows@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Move and rename accel/qtest/qtest-cpus.c files to accel/dummy-cpus.c so
it can be re-used by Xen.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <20201013140511.5681-3-jandryuk@gmail.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When split irqchip support was introduced, the meaning of
kvm_irqchip_in_kernel() changed: now it only means the LAPIC is
in kernel. The PIC, IOAPIC, and PIT might be in userspace if
irqchip=split was set. Update the doc comment to reflect that.
While at it, remove the "the user asked us" part in
kvm_irqchip_is_split() doc comment. That macro has nothing to do
with existence of explicit user-provided options.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200922203612.2178370-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We remove the CONFIG_LOCALTIME_R detection option in configure, and move the check
existence of gmtime_r from configure into C header and source directly by using macro
`_POSIX_THREAD_SAFE_FUNCTIONS`.
Before this patch, the configure script are always assume the compiler doesn't define
_POSIX_C_SOURCE macro at all, but that's not true, because thirdparty library such
as ncursesw may define -D_POSIX_C_SOURCE in it's pkg-config file. And that C Flags will
added -D_POSIX_C_SOURCE into each QEMU_CFLAGS. And that's causing the following compiling error:
n file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../softmmu/main.c:25:
C:/work/xemu/qemu/include/sysemu/os-win32.h:53:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
53 | struct tm *gmtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../softmmu/main.c:25:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:284:36: note: previous definition of 'gmtime_r' was here
284 | __forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../softmmu/main.c:25:
C:/work/xemu/qemu/include/sysemu/os-win32.h:55:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
55 | struct tm *localtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../softmmu/main.c:25:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:281:36: note: previous definition of 'localtime_r' was here
281 | __forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~~~~
Compiling C object libcommon.fa.p/hw_gpio_zaurus.c.obj
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../hw/i2c/smbus_slave.c:16:
C:/work/xemu/qemu/include/sysemu/os-win32.h:53:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
53 | struct tm *gmtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../hw/i2c/smbus_slave.c:16:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:284:36: note: previous definition of 'gmtime_r' was here
284 | __forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../hw/i2c/smbus_slave.c:16:
C:/work/xemu/qemu/include/sysemu/os-win32.h:55:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
55 | struct tm *localtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../hw/i2c/smbus_slave.c:16:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:281:36: note: previous definition of 'localtime_r' was here
281 | __forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~~~~
Compiling C object libcommon.fa.p/hw_dma_xilinx_axidma.c.obj
After this patch, whenever ncursesw or other thirdparty libraries tried to define or not
define _POSIX_C_SOURCE, the source will building properly. Because now, we don't make any
assumption if _POSIX_C_SOURCE are defined. We solely relied on if the macro `_POSIX_THREAD_SAFE_FUNCTIONS`
are defined in msys2/mingw header.
The _POSIX_THREAD_SAFE_FUNCTIONS are defined in mingw header like this:
```
#if defined(_POSIX_C_SOURCE) && !defined(_POSIX_THREAD_SAFE_FUNCTIONS)
#define _POSIX_THREAD_SAFE_FUNCTIONS 200112L
#endif
#ifdef _POSIX_THREAD_SAFE_FUNCTIONS
__forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
return localtime_s(_Tm, _Time) ? NULL : _Tm;
}
__forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
return gmtime_s(_Tm, _Time) ? NULL : _Tm;
}
__forceinline char *__CRTDECL ctime_r(const time_t *_Time, char *_Str) {
return ctime_s(_Str, 0x7fffffff, _Time) ? NULL : _Str;
}
__forceinline char *__CRTDECL asctime_r(const struct tm *_Tm, char * _Str) {
return asctime_s(_Str, 0x7fffffff, _Tm) ? NULL : _Str;
}
#endif
```
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201012234348.1427-5-luoyonggang@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When record/replay does not uses overlays for storing the snapshots,
user is not capable of issuing reverse debugging commands.
This patch adds creation of the VM snapshot on the temporary
overlay image, when the debugger connects to QEMU.
Therefore the execution can be rewind to the moment
of the debugger connection while debugging the virtual machine.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
--
v6:
- dropped unused error processing (suggested by Philippe Mathieu-Daudé)
Message-Id: <160174524096.12451.11651270339216758643.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support of the reverse continue operation for gdbstub.
Reverse continue finds the last breakpoint that would happen in normal
execution from the beginning to the current moment.
Implementation of the reverse continue replays the execution twice:
to find the breakpoints that were hit and to seek to the last breakpoint.
Reverse continue loads the previous snapshot and tries to find the breakpoint
since that moment. If there are no such breakpoints, it proceeds to
the earlier snapshot, and so on. When no breakpoints or watchpoints were
hit at all, execution stops at the beginning of the replay log.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <160174522930.12451.6994758004725016836.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GDB remote protocol supports two reverse debugging commands:
reverse step and reverse continue.
This patch adds support of the first one to the gdbstub.
Reverse step is intended to step one instruction in the backwards
direction. This is not possible in regular execution.
But replayed execution is deterministic, therefore we can load one of
the prior snapshots and proceed to the desired step. It is equivalent
to stepping one instruction back.
There should be at least one snapshot preceding the debugged part of
the replay log.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
--
v4 changes:
- inverted condition in cpu_handle_guest_debug (suggested by Alex Bennée)
Message-Id: <160174522341.12451.1498758422543765253.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Non-empty record/replay queue prevents saving and loading the VM state,
because it includes pending bottom halves and block coroutines.
But when the new VM state is loaded, we don't have to preserve the consistency
of the current state anymore. Therefore this patch just flushes the queue
allowing the coroutines to finish and removes checking for empty rr queue
for load_snapshot function.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <160174521762.12451.15752448887893855757.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds replay.json file. It will be
used for adding record/replay-related data structures and commands.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <160174519444.12451.3472949430004845434.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds an accessor function for the name of the record/replay
log file. Adding an accessor instead of making variable global,
prevents accidental modification of this variable by other modules.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <160174517710.12451.17645787545733927488.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm: uses the generic handler
qtest: uses the generic handler
whpx: changed to use the generic handler (identical implementation)
hax: changed to use the generic handler (identical implementation)
hvf: changed to use the generic handler (identical implementation)
tcg: adapt tcg-cpus to point to the tcg-specific handler
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for KVM as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[added const]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new interface starts unused, will start being used by the
next patches.
It provides methods for each accelerator to start a vcpu, kick a vcpu,
synchronize state, get cpu virtual clock and elapsed ticks.
In qemu_wait_io_event, make it clear that APC is used only for HAX
on Windows.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As this header use the ram_addr_t type, it has to include
"exec/cpu-common.h" to avoid odd errors such:
include/sysemu/xen.h:35:44: error: unknown type name 'ram_addr_t'; did you mean 'in_addr_t'?
35 | static inline void xen_hvm_modified_memory(ram_addr_t start, ram_addr_t length)
| ^~~~~~~~~~
| in_addr_t
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it was deprecated since 4.1
commit 4bb4a2732e (numa: deprecate implict memory distribution between nodes)
Users of existing VMs, wishing to preserve the same RAM distribution,
should configure it explicitly using ``-numa node,memdev`` options.
Current RAM distribution can be retrieved using HMP command
`info numa` and if separate memory devices (pc|nv-dimm) are present
use `info memory-device` and subtract device memory from output of
`info numa`.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911084410.788171-2-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the balloon-related commands to machine.json pulls less
QAPI-generated code into user-mode.
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-4-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.
Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.
Coccinelle patch used to convert all users of the macros:
@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);
@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The requirement to specify the parent class type makes the macro
harder to use and easy to misuse (silent bugs can be introduced
if the wrong struct type is specified).
Simplify the macro by just not declaring any class struct,
allowing us to remove the class_size field from the TypeInfo
variables for those types.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200916182519.415636-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move QOM macros close to the KVMState typedef.
This will make future conversion to OBJECT_DECLARE* easier.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-42-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move typedef closer to the type check macros, to make it easier
to convert the code to OBJECT_DEFINE_TYPE() in the future.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-20-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The sysemu/accel.h header is needed for the ACCEL_CLASS_NAME
macro. This will be necessary to allow us to use OBJECT_DEFINE*()
for TYPE_HVF_ACCEL.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
CONFIG_XEN is generated by configure and stored in "config-target.h",
which is (obviously) only include for target-specific objects.
This is a problem for target-agnostic objects as CONFIG_XEN is never
defined and xen_enabled() is always inlined as 'false'.
Fix by following the KVM schema, defining CONFIG_XEN_IS_POSSIBLE
when we don't know to force the call of the non-inlined function,
returning the xen_allowed boolean.
Fixes: da278d58a0 ("accel: Move Xen accelerator code under accel/xen/")
Reported-by: Paul Durrant <pdurrant@amazon.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200804074930.13104-2-philmd@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This reverts commit d10e05f15d.
We report some -tpmdev failures, but then continue as if all was fine.
Reproducer:
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -chardev null,id=tpm0 -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0
qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: tpm chardev 'chrtpm' not found.
qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: Could not cleanly shutdown the TPM: No such file or directory
QEMU 5.0.90 monitor - type 'help' for more information
(qemu) qemu-system-x86_64: -device tpm-tis,tpmdev=tpm0: Property 'tpm-tis.tpmdev' can't find value 'tpm0'
$ echo $?
1
This is a regression caused by commit d10e05f15d "tpm: Clean up error
reporting in tpm_init_tpmdev()". It's incomplete: be->create(opts)
continues to use error_report(), and we don't set an error when it
fails.
I figure converting the create() methods to Error would make some
sense, but I'm not sure it's worth the effort right now. Revert the
broken commit instead, and add a comment to tpm_init_tpmdev().
Straightforward conflict in tpm.c resolved.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.
List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth
[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html
Tests included:
$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.35 s
$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test
CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console
-----BEGIN PGP SIGNATURE-----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=gFE5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' into staging
8bit AVR port from Michael Rolnik.
Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.
List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth
[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html
Tests included:
$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.35 s
$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test
CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console
# gpg: Signature made Sat 11 Jul 2020 10:03:11 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits)
target/avr/disas: Fix store instructions display order
target/avr/cpu: Fix $PC displayed address
target/avr/cpu: Drop tlb_flush() in avr_cpu_reset()
target/avr: Add section into QEMU documentation
tests/acceptance: Test the Arduino MEGA2560 board
tests/boot-serial: Test some Arduino boards (AVR based)
hw/avr: Add limited support for some Arduino boards
hw/avr: Add some ATmega microcontrollers
hw/avr: Add support for loading ELF/raw binaries
hw/misc: avr: Add limited support for power reduction device
hw/timer: avr: Add limited support for 16-bit timer peripheral
hw/char: avr: Add limited support for USART peripheral
tests/machine-none: Add AVR support
target/avr: Register AVR support with the rest of QEMU
target/avr: Add support for disassembling via option '-d in_asm'
target/avr: Initialize TCG register variables
target/avr: Add instruction translation - CPU main translation function
target/avr: Add instruction translation - MCU Control Instructions
target/avr: Add instruction translation - Bit and Bit-test Instructions
target/avr: Add instruction translation - Data Transfer Instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add AVR related definitions into QEMU, make AVR support buildable.
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-23-huth@tuxfamily.org>
[PMD: Fixed @avr tag in qapi/machine.json]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
move the vcpu throttling functionality into its own module.
This functionality is not specific to any accelerator,
and it is used currently by migration to slow down guests to try to
have migrations converge, and by the cocoa MacOS UI to throttle speed.
cpu-throttle contains the controls to adjust and inspect throttle
settings, start (set) and stop vcpu throttling, and the throttling
function itself that is run periodically on vcpus to make them take a nap.
Execution of the throttling function on all vcpus is triggered by a timer,
registered at module initialization.
No functionality change.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200629093504.3228-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hvf_reset_vcpu() duplicates actions performed by x86_cpu_reset(). The
difference is that hvf_reset_vcpu() stores initial values directly to
VMCS while x86_cpu_reset() stores it in CPUX86State and then
cpu_synchronize_all_post_init() or cpu_synchronize_all_post_reset()
flushes CPUX86State into VMCS. That makes hvf_reset_vcpu() a kind of
no-op.
Here's the trace of CPU state modifications during VM start:
hvf_reset_vcpu (resets VMCS)
cpu_synchronize_all_post_init (overwrites VMCS fields written by
hvf_reset_vcpu())
cpu_synchronize_all_states
hvf_reset_vcpu (resets VMCS)
cpu_synchronize_all_post_reset (overwrites VMCS fields written by
hvf_reset_vcpu())
General purpose registers, system registers, segment descriptors, flags
and IP are set by hvf_put_segments() in post-init and post-reset,
therefore it's safe to remove them from hvf_reset_vcpu().
PDPTE initialization can be dropped because Intel SDM (26.3.1.6 Checks
on Guest Page-Directory-Pointer-Table Entries) doesn't require PDPTE to
be clear unless PAE is used: "A VM entry to a guest that does not use
PAE paging does not check the validity of any PDPTEs."
And if PAE is used, PDPTE's are initialized from CR3 in macvm_set_cr0().
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200630102824.77604-8-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hvf lacks an implementation of cpu_synchronize_pre_loadvm().
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200630102824.77604-4-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only remaining special case is postcopy. It cannot handle
concurrent discards yet, which would result in requesting already sent
pages from the source. Special-case it in virtio-balloon instead.
Introduce migration_in_incoming_postcopy(), to find out if incoming
postcopy is active.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drives with interface types other than if=none are for onboard
devices. Unfortunately, any such drives the board doesn't pick up can
still be used with -device, like this:
$ qemu-system-x86_64 -nodefaults -display none -S -drive if=floppy,id=bogus,unit=7 -device ide-cd,drive=bogus -monitor stdio
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) info block
bogus: [not inserted]
Attached to: /machine/peripheral-anon/device[0]
Removable device: not locked, tray closed
(qemu) info qtree
bus: main-system-bus
type System
[...]
bus: ide.1
type IDE
dev: ide-cd, id ""
---> drive = "bogus"
[...]
unit = 0 (0x0)
[...]
This kind of abuse has always worked. Deprecate it:
qemu-system-x86_64: -drive if=floppy,id=bogus,unit=7: warning: bogus if=floppy is deprecated, use if=none
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-9-armbru@redhat.com>
We are going to split the TPM backends from the TPM emulated
hardware in the next commit. Make the TPM util helpers accessible
by moving local "tpm_util.h" to global "sysemu/tpm_util.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-12-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
They have no use.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20200528193758.51454-4-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
They're either declared elsewhere or have no use.
While at it, rename _hvf_cpu_synchronize_post_init() to
do_hvf_cpu_synchronize_post_init().
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-3-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
"sysemu/hvf.h" is intended for inclusion in generic code. However it
also contains several hvf definitions and declarations, including
HVFState that are used only inside "hvf.c". "hvf-i386.h" would be more
appropriate place to define HVFState as it's only included by "hvf.c"
and "x86_task.c".
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-2-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When HVF is not available, the hvf_allowed variable does not exist.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200526172427.17460-4-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When TCG is not available, the tcg_allowed variable does not exist.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200526172427.17460-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restrict init_machine(), setup_post() and has_memory()
to system-mode.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200526172427.17460-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is majorly only for X86 because that's the only one that supports
split irqchip for now.
When the irqchip is split, we face a dilemma that KVM irqfd will be
enabled, however the slow irqchip is still running in the userspace.
It means that the resamplefd in the kernel irqfds won't take any
effect and it will miss to ack INTx interrupts on EOIs.
One example is split irqchip with VFIO INTx, which will break if we
use the VFIO INTx fast path.
This patch can potentially supports the VFIO fast path again for INTx,
that the IRQ delivery will still use the fast path, while we don't
need to trap MMIOs in QEMU for the device to emulate the EIOs (see the
callers of vfio_eoi() hook). However the EOI of the INTx will still
need to be done from the userspace by caching all the resamplefds in
QEMU and kick properly for IOAPIC EOI broadcast.
This is tricky because in this case the userspace ioapic irr &
remote-irr will be bypassed. However such a change will greatly boost
performance for assigned devices using INTx irqs (TCP_RR boosts 46%
after this patch applied).
When the userspace is responsible for the resamplefd kickup, don't
register it on the kvm_irqfd anymore, because on newer kernels (after
commit 654f1f13ea56, 5.2+) the KVM_IRQFD will fail if with both split
irqchip and resamplefd. This will make sure that the fast path will
work for all supported kernels.
https://patchwork.kernel.org/patch/10738541/#22609933
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200318145204.74483-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code is not related to hardware emulation.
Move it under accel/ with the other hypervisors.
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200508100222.7112-1-philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use the Object type all over the place.
Forward declare it in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504115656.6045-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a TPM2 ACPI table if a TPM2.0 sysbus device has been
dynamically instantiated.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200601095737.32671-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows us to keep pc-bios in executable_dir/pc-bios, rather than
executable_dir/../pc-bios, which is incompatible with oss-fuzz' file
structure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Two callers of BlockDriver.bdrv_make_empty() remain that should not call
this method directly. Both do not have access to a BdrvChild, but they
can use a BlockBackend, so we add this function that lets them use it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429141126.85159-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
Add a SIGBUS signal handler. In this handler, it checks the SIGBUS type,
translates the host VA delivered by host to guest PA, then fills this PA
to guest APEI GHES memory, then notifies guest according to the SIGBUS
type.
When guest accesses the poisoned memory, it will generate a Synchronous
External Abort(SEA). Then host kernel gets an APEI notification and calls
memory_failure() to unmapped the affected page in stage 2, finally
returns to guest.
Guest continues to access the PG_hwpoison page, it will trap to KVM as
stage2 fault, then a SIGBUS_MCEERR_AR synchronous signal is delivered to
Qemu, Qemu records this error address into guest APEI GHES memory and
notifes guest using Synchronous-External-Abort(SEA).
In order to inject a vSEA, we introduce the kvm_inject_arm_sea() function
in which we can setup the type of exception and the syndrome information.
When switching to guest, the target vcpu will jump to the synchronous
external abort vector table entry.
The ESR_ELx.DFSC is set to synchronous external abort(0x10), and the
ESR_ELx.FnV is set to not valid(0x1), which will tell guest that FAR is
not valid and hold an UNKNOWN value. These values will be set to KVM
register structures through KVM_SET_ONE_REG IOCTL.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200512030609.19593-10-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm_hwpoison_page_add() and kvm_unpoison_all() will both
be used by X86 and ARM platforms, so moving them into
"accel/kvm/kvm-all.c" to avoid duplicate code.
For architectures that don't use the poison-list functionality
the reset handler will harmlessly do nothing, so let's register
the kvm_unpoison_all() function in the generic kvm_init() function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Message-id: 20200512030609.19593-8-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are several callers that need to create a new block backend from
an existing BDS; make the task slightly easier with a common helper
routine.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424190903.522087-2-eblake@redhat.com>
[mreitz: Set @ret only in error paths, see
https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-2-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
- Fix resize (extending) of short overlays
- nvme: introduce PMR support from NVMe 1.4 spec
- qemu-storage-daemon: Fix non-string --object properties
-----BEGIN PGP SIGNATURE-----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=ad71
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix resize (extending) of short overlays
- nvme: introduce PMR support from NVMe 1.4 spec
- qemu-storage-daemon: Fix non-string --object properties
# gpg: Signature made Thu 30 Apr 2020 16:51:45 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qemu-storage-daemon: Fix non-string --object properties
qom: Factor out user_creatable_add_dict()
nvme: introduce PMR support from NVMe 1.4 spec
qcow2: Forward ZERO_WRITE flag for full preallocation
iotests: Test committing to short backing file
iotests: Filter testfiles out in filter_img_info()
block: truncate: Don't make backing file data visible
file-posix: Support BDRV_REQ_ZERO_WRITE for truncate
raw-format: Support BDRV_REQ_ZERO_WRITE for truncate
qcow2: Support BDRV_REQ_ZERO_WRITE for truncate
block-backend: Add flags to blk_truncate()
block: Add flags to bdrv(_co)_truncate()
block: Add flags to BlockDriver.bdrv_co_truncate()
qemu-iotests: allow qcow2 external discarded clusters to contain stale data
qcow2: Add incompatibility note between backing files and raw external data files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that node level interface bdrv_truncate() supports passing request
flags to the block driver, expose this on the BlockBackend level, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make compat in qemu_fdt_node_path() const char *.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-3-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow name wildcards in qemu_fdt_node_path(). This is useful
to find all nodes with a given compatibility string.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
External callers of blk_co_*() and of the synchronous blk_*() functions
don't currently increase the BlockBackend.in_flight counter, but calls
from blk_aio_*() do, so there is an inconsistency whether the counter
has been increased or not.
This patch moves the actual operations to static functions that can
later know they will always be called with in_flight increased exactly
once, even for external callers using the blk_co_*() coroutine
interfaces.
If the public blk_co_*() interface is unused, remove it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200407121259.21350-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Squashed patches from Richard Henderson modifying
qapi/common.json and tests/machine-none-test.c]
Message-Id: <20200224141923.82118-21-ysato@users.sourceforge.jp>
[PMD: Added @since 5.0 tag in SysEmuTarget]
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently, TSC is set as part of the VM runtime state. Setting TSC at
runtime is heavy and additionally can have side effects on the guest,
which are not very resilient to variances in the TSC. This patch uses
the VM state to determine whether to set TSC or not. Some minor
enhancements for getting TSC values as well that considers the VM state.
Additionally, while setting the TSC, the partition is suspended to
reduce the variance in the TSC value across vCPUs.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB08804D23439166E81FF151F7C0EA0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-5-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These days device-hotplug.c only contains the hmp_drive_add
In the next patch, rest of hmp_drive* functions will be moved
there.
Also add block-hmp-cmds.h to contain prototypes of these
functions
License for block-hmp-cmds.h since it contains the code
moved from sysemu.h which lacks license and thus according
to LICENSE is under GPLv2+
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200308092440.23564-4-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
blockdev.c uses the arch_type constant, so before we can use the file in
tools (i.e. outside of the system emulator), we need to add a stub for
it. A new QEMU_ARCH_NONE is introduced for this case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-3-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce the tpm-tis-device which is a sysbus device
and is bound to be used on ARM.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-6-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
As we plan to introduce a sysbus TPM_TIS, let's rename
TPM_TIS into TPM_TIS_ISA.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-2-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This series removes ad hoc RAM allocation API (memory_region_allocate_system_memory)
and consolidates it around hostmem backend. It allows to
* resolve conflicts between global -mem-prealloc and hostmem's "policy" option,
fixing premature allocation before binding policy is applied
* simplify complicated memory allocation routines which had to deal with 2 ways
to allocate RAM.
* reuse hostmem backends of a choice for main RAM without adding extra CLI
options to duplicate hostmem features. A recent case was -mem-shared, to
enable vhost-user on targets that don't support hostmem backends [1] (ex: s390)
* move RAM allocation from individual boards into generic machine code and
provide them with prepared MemoryRegion.
* clean up deprecated NUMA features which were tied to the old API (see patches)
- "numa: remove deprecated -mem-path fallback to anonymous RAM"
- (POSTPONED, waiting on libvirt side) "forbid '-numa node,mem' for 5.0 and newer machine types"
- (POSTPONED) "numa: remove deprecated implicit RAM distribution between nodes"
Introduce a new machine.memory-backend property and wrapper code that aliases
global -mem-path and -mem-alloc into automatically created hostmem backend
properties (provided memory-backend was not set explicitly given by user).
A bulk of trivial patches then follow to incrementally convert individual
boards to using machine.memory-backend provided MemoryRegion.
Board conversion typically involves:
* providing MachineClass::default_ram_size and MachineClass::default_ram_id
so generic code could create default backend if user didn't explicitly provide
memory-backend or -m options
* dropping memory_region_allocate_system_memory() call
* using convenience MachineState::ram MemoryRegion, which points to MemoryRegion
allocated by ram-memdev
On top of that for some boards:
* missing ram_size checks are added (typically it were boards with fixed ram size)
* ram_size fixups are replaced by checks and hard errors, forcing user to
provide correct "-m" values instead of ignoring it and continuing running.
After all boards are converted, the old API is removed and memory allocation
routines are cleaned up.
The handler allows a qtest client to send commands to the server by
directly calling a function, rather than using a file/CharBackend
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-9-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qtest_server_send is a function pointer specifying the handler used to
transmit data to the qtest client. In the standard configuration, this
calls the CharBackend handler, but now it is possible for other types of
handlers, e.g direct-function calls if the qtest client and server
exist within the same process (inproc)
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200220041118.23264-6-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A program might rely on functions implemented in vl.c, but implement its
own main(). By placing main into a separate source file, there are no
complaints about duplicate main()s when linking against vl.o. For
example, the virtual-device fuzzer uses a main() provided by libfuzzer,
and needs to perform some initialization before running the softmmu
initialization. Now, main simply calls three vl.c functions which
handle the guest initialization, main loop and cleanup.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-3-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When option -mem-prealloc is used with one or more memory-backend
objects, created backends may not obey configured bind policy or
creation may fail after kernel attempts to move pages according
to bind policy.
Reason is in file_ram_alloc(), which will pre-allocate
any descriptor based RAM if global mem_prealloc != 0 and that
happens way before bind policy is applied to memory range.
One way to fix it would be to extend memory_region_foo() API
and add more invariants that could broken later due implicit
dependencies that's hard to track.
Another approach is to drop adhoc main RAM allocation and
consolidate it around memory-backend. That allows to have
single place that allocates guest RAM (main and memdev)
in the same way and then global mem_prealloc could be
replaced by backend's property[s] that will affect created
memory-backend objects but only in correct order this time.
With main RAM now converted to hostmem backends, there is no
point in keeping global mem_prealloc around, so alias
-mem-prealloc to "memory-backend.prealloc=on"
machine compat[*] property and make mem_prealloc a local
variable to only stir registration of compat property.
*) currently user accessible -global works only with DEVICE
based objects and extra work is needed to make it work
with hostmem backends. But that is convenience option
and out of scope of this already huge refactoring.
Hence machine compat properties were used.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-78-imammedo@redhat.com>
the property will allow user to specify number of threads to use
in pre-allocation stage. It also will allow to reduce implicit
hostmem dependency on current_machine.
On object creation it will default to 1, but via machine
compat property it will be updated to MachineState::smp::cpus
to keep current behavior for hostmem and main RAM (which is
now also hostmem based).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-77-imammedo@redhat.com>
It's no longer used anywhere beside main(),
so make it local variable that is used for CLI compat
purposes to keep -mem-path option working.
Under hood QEMU will use it to create
memory-backend-file,mem-path=...
backend and use its MemoryRegion as main RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-76-imammedo@redhat.com>
In case of NUMA there are 2 cases to consider:
1. '-numa node,memdev', the only one that will be available
for 5.0 and newer machine types.
In this case reuse current behavior, with only difference
memdevs are put into MachineState::ram container +
a temporary glue to keep memory_region_allocate_system_memory()
working until all boards converted.
2. fake NUMA ("-numa node mem" and default RAM splitting)
the later has been deprecated and will be removed but the former
is going to stay available for compat reasons for 5.0 and
older machine types
it takes allocate_system_memory_nonnuma() path, like non-NUMA
case and falls under conversion to memdev. So extend non-NUMA
MachineState::ram initialization introduced in previous patch
to take care of fake NUMA case.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-6-imammedo@redhat.com>
Allow machine to opt in for hostmem backend based initial RAM
even if user uses old -mem-path/prealloc options by providing
MachineClass::default_ram_id
Follow up patches will incrementally convert machines to new API,
by dropping memory_region_allocate_system_memory() and setting
default_ram_id that board used to use before conversion to keep
migration stream the same.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-4-imammedo@redhat.com>
Both the system emulators and tools with QMP support (specifically, the
planned storage daemon) will need to parse monitor options, so move that
code to monitor/monitor.c, which can be linked into binaries that aren't
a system emulator.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-2-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The define is only used in one other place. Move the code there
instead of keeping this xen-specific define in sysemu.h.
Message-Id: <20200121161747.10569-1-thuth@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
