Commit Graph

1861 Commits

Author SHA1 Message Date
Sergio Lopez
c3157b74c4 microvm: fix memory leak in microvm_fix_kernel_cmdline
In microvm_fix_kernel_cmdline(), fw_cfg_modify_string() is duplicating
cmdline instead of taking ownership of it. Free it afterwards to avoid
leaking it.

Reported-by: Coverity (CID 1407218)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20191112163423.91884-1-slp@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-19 10:00:36 +01:00
Peter Maydell
1c5880e785 virtio, pci: fixes
A couple of bugfixes.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJdwrXTAAoJECgfDbjSjVRpLPMH/18Ktl9xtmm4mpWtunKFIHc2
 w74Xvfah3IBkJMzuOpu3CltvHqS9nqK8/l89qESwhAsidad58meB5UJeTCXGBYZq
 E7m3BHX/NbpAPWozKj+HDE1G4Ik0OO+7SPNXLkxjx1zQ9g0fgzcCQSeYgyNxjQO1
 v852aL9dyJVykHhOfhQQsT2JTJm9n0f1l/aMSJIkJQgG8xIEALSrT7Od6lqvQjz5
 /CqFgFxM+h1iymXXEgaa6RlodzOAIsoQ8dJ51M43MauyxwAlY5wO4CTWRrL/1ctH
 zEBPYVzjiUTFANSgx0jmksO7Enisx17zbPwbrcUWFNkIAw4Y2A/jm0WHP2uPFcY=
 =Mw2o
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pci: fixes

A couple of bugfixes.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 06 Nov 2019 12:00:19 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  virtio: notify virtqueue via host notifier when available
  hw/i386: AMD-Vi IVRS DMA alias support
  pci: Use PCI aliases when determining device IOMMU address space

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-07 11:56:19 +00:00
Philippe Mathieu-Daudé
48bc99a09c hw/pci-host/i440fx: Remove the last PIIX3 traces
The PIIX3 is not tied to the i440FX and can even be used without it.
Move its creation to the machine code (pc_piix.c).
We have now removed the last trace of southbridge code in the i440FX
northbridge.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-05 23:33:12 +01:00
Philippe Mathieu-Daudé
0f25d865a1 hw/pci-host: Rename incorrectly named 'piix' as 'i440fx'
We moved all the PIIX3 southbridge code out of hw/pci-host/piix.c,
it now only contains i440FX northbridge code.
Rename it to match the chipset modelled.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-05 23:33:12 +01:00
Philippe Mathieu-Daudé
14a026dd58 hw/pci-host/piix: Extract PIIX3 functions to hw/isa/piix3.c
Move all the PIIX3 functions to a new file: hw/isa/piix3.c.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-05 23:33:12 +01:00
Philippe Mathieu-Daudé
0fd61a2d1c hw/pci-host/piix: Move i440FX declarations to hw/pci-host/i440fx.h
The hw/pci-host/piix.c contains a mix of PIIX3 and i440FX chipsets
functions. To be able to split it, we need to export some
declarations first.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-05 23:33:12 +01:00
Philippe Mathieu-Daudé
4b19de14b1 hw/pci-host/piix: Define and use the PIIX IRQ Route Control Registers
The IRQ Route Control registers definitions belong to the PIIX
chipset. We were only defining the 'A' register. Define the other
B, C and D registers, and use them.

Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-05 23:33:12 +01:00
Philippe Mathieu-Daudé
0063454aff hw/pci-host/piix: Move RCR_IOPORT register definition
The RCR_IOPORT register belongs to the PIIX chipset.
Move the definition to "piix.h", and prepend the PIIX prefix.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-05 23:33:12 +01:00
Philippe Mathieu-Daudé
fff123b8fd piix4: Add a MC146818 RTC Controller as specified in datasheet
Remove mc146818rtc instanciated in malta board, to not have it twice.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20171216090228.28505-13-hpoussin@reactos.org>
[PMD: rebased, set RTC base_year to 2000]
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-05 23:33:12 +01:00
Alex Williamson
977aff1045 hw/i386: AMD-Vi IVRS DMA alias support
When we account for DMA aliases in the PCI address space, we can no
longer use a single IVHD entry in the IVRS covering all devices.  We
instead need to walk the PCI bus and create alias ranges when we find
a conventional bus.  These alias ranges cannot overlap with a "Select
All" range (as currently implemented), so we also need to enumerate
each device with IVHD entries.

Importantly, the IVHD entries used here include a Device ID, which is
simply the PCI BDF (Bus/Device/Function).  The guest firmware is
responsible for programming bus numbers, so the final revision of this
table depends on the update mechanism (acpi_build_update) to be called
after guest PCI enumeration.

For an example guest configuration of:

-+-[0000:40]---00.0-[41]----00.0  Intel Corporation 82574L Gigabit Network Connection
 \-[0000:00]-+-00.0  Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
             +-01.0  Device 1234:1111
             +-02.0-[01]----00.0  Intel Corporation 82574L Gigabit Network Connection
             +-02.1-[02]----00.0  Red Hat, Inc. QEMU XHCI Host Controller
             +-02.2-[03]--
             +-02.3-[04]--
             +-02.4-[05]--
             +-02.5-[06-09]----00.0-[07-09]--+-00.0-[08]--
             |                               \-01.0-[09]----00.0  Intel Corporation 82574L Gigabit Network Connection
             +-02.6-[0a-0c]----00.0-[0b-0c]--+-01.0-[0c]--
             |                               \-03.0  Intel Corporation 82540EM Gigabit Ethernet Controller
             +-02.7-[0d]----0e.0  Intel Corporation 82540EM Gigabit Ethernet Controller
             +-03.0  Red Hat, Inc. QEMU PCIe Expander bridge
             +-04.0  Advanced Micro Devices, Inc. [AMD] Device 0020
             +-1f.0  Intel Corporation 82801IB (ICH9) LPC Interface Controller
             +-1f.2  Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode]
             \-1f.3  Intel Corporation 82801I (ICH9 Family) SMBus Controller

Where we have:

00:02.7 PCI bridge: Intel Corporation 82801 PCI Bridge
 (dmi-to-pci-bridge)
00:03.0 Host bridge: Red Hat, Inc. QEMU PCIe Expander bridge
 (pcie-expander-bus)
06:00.0 PCI bridge: Texas Instruments XIO3130 PCI Express Switch (Upstream)
 (pcie-switch-upstream-port)
07:00.0 PCI bridge: Texas Instruments XIO3130 PCI Express Switch (Downstream)
 (pcie-switch-downstream-port)
07:01.0 PCI bridge: Texas Instruments XIO3130 PCI Express Switch (Downstream)
 (pcie-switch-downstream-port)
0a:00.0 PCI bridge: Red Hat, Inc. Device 000e
 (pcie-to-pci-bridge)

The following IVRS table is produced:

AMD-Vi: Using IVHD type 0x10
AMD-Vi: device: 00:04.0 cap: 0040 seg: 0 flags: d1 info 0000
AMD-Vi:        mmio-addr: 00000000fed80000
AMD-Vi:   DEV_SELECT			 devid: 40:00.0 flags: 00
AMD-Vi:   DEV_SELECT_RANGE_START	 devid: 41:00.0 flags: 00
AMD-Vi:   DEV_RANGE_END		 devid: 41:1f.7
AMD-Vi:   DEV_SELECT			 devid: 00:00.0 flags: 00
AMD-Vi:   DEV_SELECT			 devid: 00:01.0 flags: 00
AMD-Vi:   DEV_SELECT			 devid: 00:02.0 flags: 00
AMD-Vi:   DEV_SELECT_RANGE_START	 devid: 01:00.0 flags: 00
AMD-Vi:   DEV_RANGE_END		 devid: 01:1f.7
AMD-Vi:   DEV_SELECT			 devid: 00:02.1 flags: 00
AMD-Vi:   DEV_SELECT_RANGE_START	 devid: 02:00.0 flags: 00
AMD-Vi:   DEV_RANGE_END		 devid: 02:1f.7
AMD-Vi:   DEV_SELECT			 devid: 00:02.2 flags: 00
AMD-Vi:   DEV_SELECT_RANGE_START	 devid: 03:00.0 flags: 00
AMD-Vi:   DEV_RANGE_END		 devid: 03:1f.7
AMD-Vi:   DEV_SELECT			 devid: 00:02.3 flags: 00
AMD-Vi:   DEV_SELECT_RANGE_START	 devid: 04:00.0 flags: 00
AMD-Vi:   DEV_RANGE_END		 devid: 04:1f.7
AMD-Vi:   DEV_SELECT			 devid: 00:02.4 flags: 00
AMD-Vi:   DEV_SELECT_RANGE_START	 devid: 05:00.0 flags: 00
AMD-Vi:   DEV_RANGE_END		 devid: 05:1f.7
AMD-Vi:   DEV_SELECT			 devid: 00:02.5 flags: 00
AMD-Vi:   DEV_SELECT			 devid: 06:00.0 flags: 00
AMD-Vi:   DEV_SELECT			 devid: 07:00.0 flags: 00
AMD-Vi:   DEV_SELECT_RANGE_START	 devid: 08:00.0 flags: 00
AMD-Vi:   DEV_RANGE_END		 devid: 08:1f.7
AMD-Vi:   DEV_SELECT			 devid: 07:01.0 flags: 00
AMD-Vi:   DEV_SELECT_RANGE_START	 devid: 09:00.0 flags: 00
AMD-Vi:   DEV_RANGE_END		 devid: 09:1f.7
AMD-Vi:   DEV_SELECT			 devid: 00:02.6 flags: 00
AMD-Vi:   DEV_SELECT			 devid: 0a:00.0 flags: 00
AMD-Vi:   DEV_ALIAS_RANGE		 devid: 0b:00.0 flags: 00 devid_to: 0b:00.0
AMD-Vi:   DEV_RANGE_END		 devid: 0c:1f.7
AMD-Vi:   DEV_SELECT			 devid: 00:02.7 flags: 00
AMD-Vi:   DEV_ALIAS_RANGE		 devid: 0d:00.0 flags: 00 devid_to: 00:02.7
AMD-Vi:   DEV_RANGE_END		 devid: 0d:1f.7
AMD-Vi:   DEV_SELECT			 devid: 00:03.0 flags: 00
AMD-Vi:   DEV_SELECT			 devid: 00:04.0 flags: 00
AMD-Vi:   DEV_SELECT			 devid: 00:1f.0 flags: 00
AMD-Vi:   DEV_SELECT			 devid: 00:1f.2 flags: 00
AMD-Vi:   DEV_SELECT			 devid: 00:1f.3 flags: 00

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <157187084880.5439.16700585779699233836.stgit@gimli.home>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-11-05 04:04:21 -05:00
Paolo Bonzini
bf13bfab08 i386: implement IGNNE
Change the handling of port F0h writes and FPU exceptions to implement IGNNE.

The implementation mixes a bit what the chipset and processor do in real
hardware, but the effect is the same as what happens with actual FERR#
and IGNNE# pins: writing to port F0h asserts IGNNE# in addition to lowering
FP_IRQ; while clearing the SE bit in the FPU status word deasserts IGNNE#.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-26 15:38:07 +02:00
Paolo Bonzini
6f529b7534 target/i386: move FERR handling to target/i386
Move it out of pc.c since it is strictly tied to TCG.  This is
almost exclusively code movement, the next patch will implement
IGNNE.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-26 15:38:07 +02:00
Paolo Bonzini
673652a785 Merge commit 'df84f17' into HEAD
This merge fixes a semantic conflict with the trivial tree.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-26 15:38:02 +02:00
Philippe Mathieu-Daudé
bcdb90640a hw: Move MC146818 device from hw/timer/ to hw/rtc/ subdirectory
The MC146818 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.

Use copyright statement from 80cabfad16 for "hw/rtc/mc146818rtc.h".

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24 20:13:10 +02:00
Philippe Mathieu-Daudé
b4de58a4e1 hw/i386/pc: Remove kvm_i386.h include
By extracting pc_gsi_create() and pc_i8259_create() we removed
the access to "kvm_i386.h" from the machine code. We can now
remove it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191015162705.28087-25-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-24 14:24:54 +02:00
Philippe Mathieu-Daudé
4501d317b5 hw/i386/pc: Extract pc_i8259_create()
The i8259 creation code is common to all PC machines, extract the
common code.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018135910.24286-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-24 14:24:54 +02:00
Philippe Mathieu-Daudé
b00c6f18a6 hw/i386/pc: Move gsi_state creation code
The code block related to IRQ starts few lines later. Move
the comment and the pc_gsi_create() invocation where we start
to use the IRQs.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018135910.24286-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-24 14:24:54 +02:00
Philippe Mathieu-Daudé
417258f139 hw/i386/pc: Extract pc_gsi_create()
The GSI creation code is common to all PC machines, extract the
common code.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018135910.24286-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-24 14:24:34 +02:00
Sergio Lopez
0ebf007dda hw/i386: Introduce the microvm machine type
microvm is a machine type inspired by Firecracker and constructed
after its machine model.

It's a minimalist machine type without PCI nor ACPI support, designed
for short-lived guests. microvm also establishes a baseline for
benchmarking and optimizing both QEMU and guest operating systems,
since it is optimized for both boot time and footprint.

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-22 09:39:54 +02:00
Sergio Lopez
703a548aa9 hw/i386: make x86.c independent from PCMachineState
As a last step into splitting PCMachineState and deriving
X86MachineState from it, make the functions previously extracted from
pc.c to x86.c independent from PCMachineState, using X86MachineState
instead.

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-22 09:39:54 +02:00
Paolo Bonzini
f0bb276bf8 hw/i386: split PCMachineState deriving X86MachineState from it
Split up PCMachineState and PCMachineClass and derive X86MachineState
and X86MachineClass from them. This allows sharing code with non-PC
x86 machine types.

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-22 09:39:50 +02:00
Sergio Lopez
549e984e67 hw/i386/pc: move shared x86 functions to x86.c and export them
Move x86 functions that will be shared between PC and non-PC machine
types to x86.c, along with their helpers.

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-22 09:38:42 +02:00
Sergio Lopez
86a9a7916b hw/i386/pc: remove commented out code from x86_load_linux()
Follow checkpatch.pl recommendation and remove commented out code from
x86_load_linux().

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-10-22 09:38:42 +02:00
Sergio Lopez
350f5233d7 hw/i386/pc: avoid an assignment in if condition in x86_load_linux()
Follow checkpatch.pl recommendation and avoid an assignment in if
condition in x86_load_linux().

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-10-22 09:38:42 +02:00
Sergio Lopez
133ef074bd hw/i386/pc: replace use of strtol with qemu_strtoui in x86_load_linux()
Follow checkpatch.pl recommendation and replace the use of strtol with
qemu_strtoui in x86_load_linux().

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-10-22 09:38:42 +02:00
Sergio Lopez
62a188546f hw/i386/pc: fix code style issues on functions that will be moved out
Fix code style issues detected by checkpatch.pl on functions that will
be moved out to x86.c.

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-10-22 09:38:42 +02:00
Sergio Lopez
81ef68e44c hw/i386/pc: rename functions shared with non-PC machines
The following functions are named *pc* but are not PC-machine specific
but generic to the X86 architecture, rename them:

  load_linux                 -> x86_load_linux
  pc_new_cpu                 -> x86_new_cpu
  pc_cpus_init               -> x86_cpus_init
  pc_cpu_index_to_props      -> x86_cpu_index_to_props
  pc_get_default_cpu_node_id -> x86_get_default_cpu_node_id
  pc_possible_cpu_arch_ids   -> x86_possible_cpu_arch_ids
  old_pc_system_rom_init     -> x86_system_rom_init

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-22 09:38:42 +02:00
Peter Maydell
39b68bc4f1 virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
 tests for new arm/virt ACPI tables.
 
 Virtio fs support (no migration).
 A vhost-user reconnect bugfix.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJdpjPbAAoJECgfDbjSjVRpQqUH/2xyT++y8K17mCI1IILLZd3d
 eOqElEHz78qlEfR2euv63YksZoeHpMO5HiAdwOGGF8CjcaCT4Hl+pPDffTYVXtt+
 VZ88vSSXL49wpMcpvRGR5Isy0eXJzWilTBMu2eu8phN9tX82dlu08Oi4XGAosrBJ
 uZg61DyiGDnSOpoofHhjvXJEaiL0pzkTjf8qAoW3TaVcB9NQKnunMEIDD646JS5z
 AAj4+XBJfUG9cp7/MG+djjVmJDdUpjL5e5uWNWakbgUVqSbHog78RIrBoD6SH7pt
 /6hHHoSM9VX1wWgdTdVdNAQAZVnWs31w4v31d8UfaT15KJEoG47U0gDgmLzXDyo=
 =+xdg
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, vhost, acpi: features, fixes, tests

ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.

Virtio fs support (no migration).
A vhost-user reconnect bugfix.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  virtio: add vhost-user-fs-pci device
  virtio: add vhost-user-fs base device
  virtio: Add virtio_fs linux headers
  tests/acpi: add expected tables for arm/virt
  tests: document how to update acpi tables
  tests: Add bios tests to arm/virt
  tests: allow empty expected files
  tests/acpi: add empty files
  tests: Update ACPI tables list for upcoming arm/virt tests
  docs/specs: Add ACPI GED documentation
  hw/arm: Use GED for system_powerdown event
  hw/arm: Factor out powerdown notifier from GPIO
  hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
  hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
  hw/arm/virt: Add memory hotplug framework
  hw/acpi: Add ACPI Generic Event Device Support
  hw/acpi: Do not create memory hotplug method when handler is not defined
  hw/acpi: Make ACPI IO address space configurable
  vhost-user: save features if the char dev is closed

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-17 15:30:44 +01:00
Shameer Kolothum
091c466e26 hw/acpi: Make ACPI IO address space configurable
This is in preparation for adding support for ARM64 platforms
where it doesn't use port mapped IO for ACPI IO space. We are
making changes so that MMIO region can be accommodated
and board can pass the base address into the aml build function.

Also move few MEMORY_* definitions to header so that other memory
hotplug event signalling mechanisms (eg. Generic Event Device on
HW-reduced acpi platforms) can use the same from their respective
event handler code.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190918130633.4872-2-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-05 17:12:08 -04:00
Eric Auger
549d400587 memory: allow memory_region_register_iommu_notifier() to fail
Currently, when a notifier is attempted to be registered and its
flags are not supported (especially the MAP one) by the IOMMU MR,
we generally abruptly exit in the IOMMU code. The failure could be
handled more nicely in the caller and especially in the VFIO code.

So let's allow memory_region_register_iommu_notifier() to fail as
well as notify_flag_changed() callback.

All sites implementing the callback are updated. This patch does
not yet remove the exit(1) in the amd_iommu code.

in SMMUv3 we turn the warning message into an error message saying
that the assigned device would not work properly.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-04 18:49:18 +02:00
Corey Minyard
ebe15582ca pc: Add an SMB0 ACPI device to q35
This is so I2C devices can be found in the ACPI namespace.  Currently
that's only IPMI, but devices can be easily added now.

Adding the devices required some PCI information, and the bus itself
to be added to the PCMachineState structure.

Note that this only works on Q35, the ACPI for PIIX4 is not capable
of handling an SMBus device.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-20 14:09:24 -05:00
Corey Minyard
576d05b67f ipmi: Fix SSIF ACPI handling to use the right CRS
Pass in the CRS so that it can be set to the SMBus for IPMI later.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-20 14:08:10 -05:00
Corey Minyard
38033052f6 ipmi: Add an SMBus IPMI interface
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-20 14:08:10 -05:00
Corey Minyard
12f983c6aa ipmi: Add PCI IPMI interfaces
Pretty straightforward, just hook the current KCS and BT code into
the PCI system with the proper configuration.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: M: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-20 14:08:10 -05:00
Peter Maydell
f396411259 virtio,vhost,pc: features, fixes, cleanups.
Virtio 1.0 support for virtio-mmio.
 Misc fixes, cleanups.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJdf6eKAAoJECgfDbjSjVRpAHIIAInjiMQmc/9ZOlmdRKZtG7ju
 StJXT+btc1yy4auLGpdNpwmuO3JpidacMqjWbJrglTrljf1B19hIoSVgcAskBj/N
 659oHbuaihcHNkidAOy3Gb8abZ7lOdAr4Q8PQriN4C/Y4T0ln8lNqoxiBz2k5XgJ
 TRib7U64SzfFwEm/LD/bdaWjTzMc2Oa7/OruDwHO19SE5Pd5Vq2KAvfhzwdBooRk
 yNZSdpR5dxnS+FOiXCLXybGNc9Ndgcdzs4+cl1Wm8EBqJqZUaMXNGDoJoI6qrUw0
 T6RLd0d4YyBTebUafeaE/D+0Qwffm3LLpaYK6l0gQJXPItp5q0xHBmOtgvcUlVU=
 =OoO7
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,vhost,pc: features, fixes, cleanups.

Virtio 1.0 support for virtio-mmio.
Misc fixes, cleanups.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 16 Sep 2019 16:17:30 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  virtio-mmio: implement modern (v2) personality (virtio-1)
  virtio pmem: user document
  intel_iommu: Remove the caching-mode check during flag change
  pc/q35: Disallow vfio-pci hotplug without VT-d caching mode
  qdev/machine: Introduce hotplug_allowed hook
  intel_iommu: Sanity check vfio-pci config on machine init done
  backends/vhost-user.c: prevent using uninitialized vqs
  vhost-user-blk: prevent using uninitialized vqs
  docs/nvdimm: add example on persistent backend setup
  MAINTAINERS: update virtio-rng and virtio-serial maintainer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-17 16:24:08 +01:00
Philippe Mathieu-Daudé
149c50cabc hw/i386/pc: Extract the x86 generic fw_cfg code
Extract all the functions that are not PC-machine specific into
the (arch-specific) fw_cfg.c file. This will allow other X86-machine
to reuse these functions.

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-16-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:09 +02:00
Philippe Mathieu-Daudé
367607f913 hw/i386/pc: Rename pc_build_feature_control() as generic fw_cfg_build_*
Now that the pc_build_feature_control_file() function has been
refactored to not depend of PC specific types, rename it to a
more generic name.

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:09 +02:00
Philippe Mathieu-Daudé
4e91c7f32e hw/i386/pc: Let pc_build_feature_control() take a MachineState argument
Let the pc_build_feature_control_file() function take a generic MachineState
argument.

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-14-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:09 +02:00
Philippe Mathieu-Daudé
eb6449fbd8 hw/i386/pc: Let pc_build_feature_control() take a FWCfgState argument
Pass the FWCfgState object by argument, this will
allow us to remove the PCMachineState argument later.

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-13-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:09 +02:00
Philippe Mathieu-Daudé
e0e949d7d8 hw/i386/pc: Rename pc_build_smbios() as generic fw_cfg_build_smbios()
Now that the pc_build_smbios() function has been refactored to not
depend of PC specific types, rename it to a more generic name.

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-12-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:08 +02:00
Philippe Mathieu-Daudé
f16f6f05a0 hw/i386/pc: Let pc_build_smbios() take a generic MachineState argument
Let the pc_build_smbios() function take a generic MachineState
argument.

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-11-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:08 +02:00
Philippe Mathieu-Daudé
14fe280757 hw/i386/pc: Let pc_build_smbios() take a FWCfgState argument
Pass the FWCfgState object by argument, this will
allow us to remove the PCMachineState argument later.

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:08 +02:00
Paolo Bonzini
bd802bd981 hw/i386/pc: Replace PCMachineState argument with MachineState in fw_cfg_arch_create
In the previous commit we removed the last access to PCMachineState.
Replace it with a generic MachineState argument and use it to retrieve
the CPUArchIdList.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:08 +02:00
Philippe Mathieu-Daudé
264b485776 hw/i386/pc: Pass the CPUArchIdList array by argument
Pass the CPUArchIdList array by argument, this will
allow us to remove the PCMachineState argument later.

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-8-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:08 +02:00
Philippe Mathieu-Daudé
57e23e7837 hw/i386/pc: Pass the apic_id_limit value by argument
Pass the apic_id_limit value by argument, this will
allow us to remove the PCMachineState argument later.

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:08 +02:00
Philippe Mathieu-Daudé
524acbe97d hw/i386/pc: Pass the boot_cpus value by argument
The boot_cpus is used once. Pass it by argument, this will
allow us to remove the PCMachineState argument later.

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:07 +02:00
Philippe Mathieu-Daudé
5888e01cfd hw/i386/pc: Rename bochs_bios_init as more generic fw_cfg_arch_create
The bochs_bios_init() function is not restricted to the Bochs
BIOS and is useful to other BIOS.
Since it is not specific to the PC machine, and can be reused
by other machines of the X86 architecture, rename it as
fw_cfg_arch_create().

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:07 +02:00
Philippe Mathieu-Daudé
0f432b3064 hw/i386/pc: Use address_space_memory in place
The address_space_memory variable is used once.
Use it in place and remove the argument.

Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:07 +02:00
Philippe Mathieu-Daudé
d6d059ca07 hw/i386/pc: Extract e820 memory layout code
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:07 +02:00
Philippe Mathieu-Daudé
42d400acfc hw/i386/pc: Use e820_get_num_entries() to access e820_entries
To be able to extract the e820* code out of this file (in the next
patch), access e820_entries with its correct helper.

Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 17:13:07 +02:00
Peter Xu
e7df189e19 intel_iommu: Remove the caching-mode check during flag change
That's never a good place to stop QEMU process... Since now we have
both the machine done sanity check and also the hotplug handler, we
can safely remove this to avoid that.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190916080718.3299-5-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-16 06:57:24 -04:00
Peter Xu
c6cbc29d36 pc/q35: Disallow vfio-pci hotplug without VT-d caching mode
Instead of bailing out when trying to hotplug a vfio-pci device with
below configuration:

  -device intel-iommu,caching-mode=off

With this we can return a warning message to the user via QMP/HMP and
the VM will continue to work after failing the hotplug:

  (qemu) device_add vfio-pci,bus=root.3,host=05:00.0,id=vfio1
  Error: Device assignment is not allowed without enabling caching-mode=on for Intel IOMMU.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190916080718.3299-4-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-16 06:57:24 -04:00
Peter Xu
28cf553afe intel_iommu: Sanity check vfio-pci config on machine init done
This check was previously only happened when the IOMMU is enabled in
the guest.  It was always too late because the enabling of IOMMU
normally only happens during the boot of guest OS.  It means that we
can bail out and exit directly during the guest OS boots if the
configuration of devices are not supported.  Or, if the guest didn't
enable vIOMMU at all, then the user can use the guest normally but as
long as it reconfigure the guest OS to enable the vIOMMU then reboot,
the user will see the panic right after the reset when the next boot
starts.

Let's make this failure even earlier so that we force the user to use
caching-mode for vfio-pci devices when with the vIOMMU.  So the user
won't get surprise at least during execution of the guest, which seems
a bit nicer.

This will affect some user who didn't enable vIOMMU in the guest OS
but was using vfio-pci and the vtd device in the past.  However I hope
it's not a majority because not enabling vIOMMU with the device
attached is actually meaningless.

We still keep the old assertion for safety so far because the hotplug
path could still reach it, so far.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190916080718.3299-2-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-16 06:57:24 -04:00
Cole Robinson
709ebb9054 hw/i386: Move CONFIG_ACPI_PCI to CONFIG_PC
CONFIG_ACPI_PCI is a hard requirement of acpi-build.c, which is built
unconditionally for x86 target. Putting it in default-configs/ suggests
that it can be easily disabled, which isn't true.

Relocate the symbol with the other acpi-build.c requirements, under
'config PC'. This is similar to what is done for the arm 'virt' machine
type and CONFIG_ACPI_PCI

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <e73e6edff68fd30d69c6a1d02c9ef9192f773c63.1568049871.git.crobinso@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16 12:32:21 +02:00
Maxiwell S. Garcia
4173324946 migration: Do not re-read the clock on pre_save in case of paused guest
The clock move makes the guest knows about the paused time between the
'stop' and 'migrate' commands. This is an issue in an already-paused
VM because some side effects, like process stalls, could happen
after migration.

So, this patch checks the runstate of guest in the pre_save handler and
do not re-reads the clock in case of paused state (cold migration).

Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Message-Id: <20190829210711.6570-1-maxiwell@linux.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 14:39:46 -03:00
Igor Mammedov
c6c1bb89fb x86: do not advertise die-id in query-hotpluggbale-cpus if '-smp dies' is not set
Commit 176d2cda0 (i386/cpu: Consolidate die-id validity in smp context) added
new 'die-id' topology property to CPUs and exposed it via QMP command
query-hotpluggable-cpus, which broke -device/device_add cpu-foo for existing
users that do not support die-id/dies yet. That's would be fine if it happened
to new machine type only but it also happened to old machine types,
which breaks migration from old QEMU to the new one, for example following CLI:

  OLD-QEMU -M pc-i440fx-4.0 -smp 1,max_cpus=2 \
           -device qemu64-x86_64-cpu,socket-id=1,core-id=0,thread-id
is not able to start with new QEMU, complaining about invalid die-id.

After discovering regression, the patch
   "pc: Don't make die-id mandatory unless necessary"
makes die-id optional so old CLI would work.

However it's not enough as new QEMU still exposes die-id via query-hotpluggbale-cpus
QMP command, so the users that started old machine type on new QEMU, using all
properties (including die-id) received from QMP command (as required), won't be
able to start old QEMU using the same properties since it doesn't support die-id.

Fix it by hiding die-id in query-hotpluggbale-cpus for all machine types in case
'-smp dies' is not provided on CLI or -smp dies = 1', in which case smp_dies == 1
and APIC ID is calculated in default way (as it was before DIE support) so we won't
need compat code as in both cases the topology provided to guest via CPUID is the same.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190902120222.6179-1-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 14:39:46 -03:00
Jan Kiszka
f685f45157 i386/vmmouse: Properly reset state
nb_queue was not zeroed so that we no longer delivered events if a
previous guest left the device in an overflow state.

The state of absolute does not matter as the next vmmouse_update_handler
call will align it again.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <f056c7e5-fa74-469c-87f8-0f0925301b2d@web.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 14:39:46 -03:00
Eduardo Habkost
fea374e7c8 pc: Don't make die-id mandatory unless necessary
We have this issue reported when using libvirt to hotplug CPUs:
https://bugzilla.redhat.com/show_bug.cgi?id=1741451

Basically, libvirt is not copying die-id from
query-hotpluggable-cpus, but die-id is now mandatory.

We could blame libvirt and say it is not following the documented
interface, because we have this buried in the QAPI schema
documentation:

> Note: currently there are 5 properties that could be present
> but management should be prepared to pass through other
> properties with device_add command to allow for future
> interface extension. This also requires the filed names to be kept in
> sync with the properties passed to -device/device_add.

But I don't think this would be reasonable from us.  We can just
make QEMU more flexible and let die-id to be omitted when there's
no ambiguity.  This will allow us to keep compatibility with
existing libvirt versions.

Test case included to ensure we don't break this again.

Fixes: commit 176d2cda0d ("i386/cpu: Consolidate die-id validity in smp context")
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190816170750.23910-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 14:39:46 -03:00
Eduardo Habkost
23d9cff489 pc: Improve error message when die-id is omitted
The error message when die-id is omitted doesn't make sense:

  $ qemu-system-x86_64 -smp 1,sockets=6,maxcpus=6 \
    -device qemu64-x86_64-cpu,socket-id=1,core-id=0,thread-id=0
  qemu-system-x86_64: -device qemu64-x86_64-cpu,socket-id=1,core-id=0,thread-id=0: \
    Invalid CPU die-id: 4294967295 must be in range 0:0

Fix it, so it will now read:

  qemu-system-x86_64: -device qemu64-x86_64-cpu,socket-id=1,core-id=0,thread-id=0: \
    CPU die-id is not set

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190815183803.13346-3-ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 14:39:46 -03:00
Eduardo Habkost
2a0585e183 pc: Fix error message on die-id validation
The error message for die-id range validation is incorrect.  Example:

  $ qemu-system-x86_64 -smp 1,sockets=6,maxcpus=6 \
    -device qemu64-x86_64-cpu,socket-id=1,die-id=1,core-id=0,thread-id=0
  qemu-system-x86_64: -device qemu64-x86_64-cpu,socket-id=1,die-id=1,core-id=0,thread-id=0: \
    Invalid CPU die-id: 1 must be in range 0:5

The actual range for die-id in this example is 0:0.

Fix the error message to use smp_dies and print the correct range.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190815183803.13346-2-ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 14:39:46 -03:00
Tao Xu
7e721e7b10 numa: move numa global variable numa_info into MachineState
Move existing numa global numa_info (renamed as "nodes") into NumaState.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-5-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 11:26:55 -03:00
Tao Xu
118154b767 numa: move numa global variable have_numa_distance into MachineState
Move existing numa global have_numa_distance into NumaState.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Liu Jingqi <jingqi.liu@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-4-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 11:26:55 -03:00
Tao Xu
aa57020774 numa: move numa global variable nb_numa_nodes into MachineState
Add struct NumaState in MachineState and move existing numa global
nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable
numa_support into MachineClass to decide which submachines support NUMA.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-3-tao3.xu@intel.com>
[ehabkost: include hw/boards.h again to fix build failures]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 11:26:55 -03:00
Igor Druzhinin
ba7fdd64b6 xen: cleanup IOREQ server on exit
Device model is supposed to destroy IOREQ server for itself.

Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <1564428563-1006-1-git-send-email-igor.druzhinin@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-08-27 14:18:28 +01:00
Peter Maydell
f3b8f18ebf Monitor patches for 2019-08-21
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl1dZKsSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTJ4QP/10izA+dSofQ9404GRq3TNzwRCKugU44
 nES9CqDh6x5emx+ADQWYkugblgfH9GOvUaAUNtY+uFaEr55yC/F+VWeVXvyjt5U6
 ZpPZqIRDOHo2+PZrddr/KcKmiomS6plz03m9bzb3pYN1yIl2ZzgClAhAqWQLk0WB
 wwiY+YsJ83YR4sdiRMZkuF+UL7N8fSqYvIIj0yzM8+8ONDor9n16PoPeFg3JSsyG
 aMxXIUnSBZAVtClaNkUPtS0Wf9XEuqoG1rvMRV4Vv+eeb7fwA414DqanRJdLlGMA
 yNRtFcVyztCfjgVEXnY9JJlFe6pDkoe8ycoimQ4YA60C9c1DIMHqyjFWXRHfDwk8
 bYMSX6CTpfoEvbTfmwqYR6KSkb/KuXiFDmcYlTYFvIt3grhhdHQbru9vy+E5sm/b
 j3CPV2DTCkeGY+oZFfKIaQT9yoWZOhmMY5doMTYyinXygPTGQROUrHtzUeRXKmJZ
 arqDRmh+mlEiGETNeYQCI45eYCSDYxO+UNrhszxhmv6B1+ixhIrV2oXhi61vVBeY
 yngY4EILbuA2Z/E4BevJk91ESWJTr3UP13c6p7yf21iN4BD1KkHy5HoXCgYfQDeV
 4kar49g6WQ/VQEiwhi65Xd0OwstynkcV69F+kMagVMgaLeRsdU5ikGJQzxTeWJRl
 SPpc7oDwuAS+
 =2F3E
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2019-08-21' into staging

Monitor patches for 2019-08-21

# gpg: Signature made Wed 21 Aug 2019 16:35:07 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2019-08-21:
  monitor/qmp: Update comment for commit 4eaca8de26
  qdev: Collect HMP handlers command handlers in qdev-monitor.c
  qapi: Move query-target from misc.json to machine.json
  hw/core: Move cpu.c, cpu.h from qom/ to hw/core/

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-22 10:31:21 +01:00
Peter Maydell
fe066b4848 Various trivial fixes
-----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl1dKK8SHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748WhUP93YZ60SfAFhFLkAexO3fJSMzzb02Zvy3
 6Q0UyR56xigESPhlfD3rPtPdMpQRnROtIsS1qWcd6x/ejKINh08xyx1HkWLfMKOn
 F1Cc43AdkSqsuEbIfYVJbL/Yz7H6SnD7B9ghV6B2S+nDnDXGMzObAb6QXUtlnMV+
 4as6pawKOLZiP0zFb+98m1as1gjjuQA/3jrQjWPfF3pzYAaBQPh/pHgDhUSVWjsi
 G7KWu4iljKio15WhhRlzKylhSD8Z4u1OD5x/3pbPnborVnOzvryWQ1hiRQ1feB/h
 NUaWs3A2KcgM54LIZN0dC4APGdPlLohwNhakaZR8EnJD9eik2kRO3JBmzorkSHua
 y0UBpNkjeIR/Cv4ayZv6NtrNFmuEJRRcusPBHg7sg0IBUtd4YdXrfE5d2tcYS3Hu
 WoZaYLME1FmbuByJFs+cQhMw88ISYvGD5PkzfkZuQC9/nM/zd6pJyRCAhgchIkfh
 G5iCtOMK8gs5xZjr22pOx/XYLFRzFsOIsGx3kcHH3vSJVS5K3QYFt2xH47YmQZHk
 1k3wQfc8ePFPFpR2rnWqg+iYbPgl8FpOsEfz4fuPRwBeRGFRRzfkpXLQ2DJww59/
 8pd2UAWgdwrvtimmykfEmTu+LUuZKwNFJNH3KfNputbBqjnv1KkbmsPqnElj3deo
 a7LJ72Z1k4Q=
 =dzAT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

Various trivial fixes

# gpg: Signature made Wed 21 Aug 2019 12:19:11 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  hw/display: Compile various display devices as common object
  hw/display/sm501: Remove unused include
  spapr_events: Rewrite a fall through comment
  vl: Rewrite a fall through comment
  target/ppc: Rewrite a fall through comment
  hw/ipmi: Rewrite a fall through comment
  hw/dma/omap_dma: Move switch 'fall through' comment to correct place
  json: Move switch 'fall through' comment to correct place
  hw/net/e1000: Fix erroneous comment
  .gitignore: ignore some vhost-user* related files
  configure: fix sdl detection using sdl2-config
  configure: remove obsoleted $sparc_cpu variable
  misc: fix naming scheme of compatiblity arrays
  test: Use g_strndup instead of plain strndup

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21 16:59:22 +01:00
Peter Maydell
e65472c7bc ppc patch queue for 2019-08-21
First ppc and spapr pull request for qemu-4.2.  Includes:
    * Some TCG emulation fixes and performance improvements
    * Support for the mffsl instruction in TCG
    * Added missing DPDES SPR
    * Some enhancements to the emulation of the XIVE interrupt
      controller
    * Cleanups to spapr MSI management
    * Some new suspend/resume infrastructure and a draft suspend
      implementation for spapr
    * New spapr hypercall for TPM communication (will be needed for
      secure guests under an Ultravisor)
    * Fix several memory leaks
 
 And a few other assorted fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAl1c8bwACgkQbDjKyiDZ
 s5Ko6hAA1Y1xOreKTUP9UtAIaipfdasOMOcGYQ+MMovh05Zn0CwmB0uukeIzbnhi
 hU3qMue6Q0EAt5F9d9z4YWRZqkgsAOBd7SVHpSouoY6DOtIsL9Tc0jTrpr6z8t0L
 j4TYZYlJUybKMocj/8YayTALMZf2myh5A+oxDGPQHqYNWYGCEcttsFbcoeWQbAXG
 eXrGDuSzXDXJSKej99ty/tpSjbJXDbRcvMv+v3v6F+tHWhNke3Ku8s7niDy3fIZU
 lU1Sbz0/UnjKXpCWI/WRBFFWrr1bYICvKPzjK1tNJgA/HhAp37IIsF/j/5kmmF0Y
 dxOCf3kRBhGi5/KKDFrVWwdTiU0CdJ4iF/NvaNlZGZ+oSTZzANz6O/nlAjcBlbt6
 nAJRB4irKkDpL0slwDhl+oF73kFXMUokNgqeaMXE03agMapHrHfmxHs7yL5lAnxf
 I0hyfAUYTZBc1yd8dxEtmEoFYGE9OXU5jZC4BcV8GcrT1tK3ZVzsALetRF2Sm1wm
 wW16B0V6szsDd67cwJdPIs3tR6ZSxX2D6/vhK4mK77TM9TAN7nEMJBFNwjNbnttD
 QLRhFnIZQ61Ja+tDI0aV37bSM32Mi43bYRksh2FujgaYpX92Z0QfsDf9NtM9yQab
 Ihbq7KJ/bK4m9OvmWTUO4CKrCbnzMEzL+ncFamoO2PcvG9uTk+M=
 =E+7d
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20190821' into staging

ppc patch queue for 2019-08-21

First ppc and spapr pull request for qemu-4.2.  Includes:
   * Some TCG emulation fixes and performance improvements
   * Support for the mffsl instruction in TCG
   * Added missing DPDES SPR
   * Some enhancements to the emulation of the XIVE interrupt
     controller
   * Cleanups to spapr MSI management
   * Some new suspend/resume infrastructure and a draft suspend
     implementation for spapr
   * New spapr hypercall for TPM communication (will be needed for
     secure guests under an Ultravisor)
   * Fix several memory leaks

And a few other assorted fixes.

# gpg: Signature made Wed 21 Aug 2019 08:24:44 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.2-20190821: (42 commits)
  ppc: Fix emulated single to double denormalized conversions
  ppc: Fix emulated INFINITY and NAN conversions
  ppc: conform to processor User's Manual for xscvdpspn
  ppc: Add support for 'mffsl' instruction
  target/ppc: Add Directed Privileged Door-bell Exception State (DPDES) SPR
  spapr/xive: Mask the EAS when allocating an IRQ
  spapr: Implement better workaround in spapr-vty device
  spapr/irq: Drop spapr_irq_msi_reset()
  spapr/pci: Free MSIs during reset
  spapr/pci: Consolidate de-allocation of MSIs
  ppc: remove idle_timer logic
  spapr: Implement ibm,suspend-me
  i386: use machine class ->wakeup method
  machine: Add wakeup method to MachineClass
  ppc/xive: Improve 'info pic' support
  ppc/xive: Provide silent escalation support
  ppc/xive: Provide unconditional escalation support
  ppc/xive: Provide escalation support
  ppc/xive: Provide backlog support
  ppc/xive: Implement TM_PULL_OS_CTX special command
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21 14:04:17 +01:00
Markus Armbruster
2e5b09fd0e hw/core: Move cpu.c, cpu.h from qom/ to hw/core/
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
2019-08-21 13:24:01 +02:00
Marc-André Lureau
ac78f73722 misc: fix naming scheme of compatiblity arrays
Since merge 31ed41889e ("Merge
remote-tracking branch
'remotes/elmarco/tags/machine-props-pull-request' into staging"), the
compat arrays are in lowercase.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190708204909.10891-1-marcandre.lureau@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-21 10:29:03 +02:00
Nicholas Piggin
c508bd12f6 i386: use machine class ->wakeup method
Move the i386 suspend_wakeup logic out of the fallback path, and into
the new ->wakeup method.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190722061752.22114-1-npiggin@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-21 17:17:39 +10:00
Cornelia Huck
9aec2e52ce hw: add compat machines for 4.2
Add 4.2 machine types for arm/i440fx/q35/s390x/spapr.

For i440fx and q35, unversioned cpu models are still translated
to -v1, as 0788a56bd1 ("i386: Make unversioned CPU models be
aliases") states this should only transition to the latest cpu
model version in 4.3 (or later).

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190724103524.20916-1-cohuck@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-21 11:32:11 +10:00
Stefano Garzarella
e502fe96ac hw/i386/pc: Map into memory the initrd
In order to reduce the memory footprint we map into memory
the initrd using g_mapped_file_new() instead of reading it.
In this way we can share the initrd pages between multiple
instances of QEMU.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190724143105.307042-4-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-20 17:26:18 +02:00
Markus Armbruster
54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster
46517dd497 Include sysemu/sysemu.h a lot less
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a
"qdev: add qdev_add_vm_change_state_handler()".  This is a bad idea:
hw/qdev-core.h is widely included.

Move the declaration of qdev_add_vm_change_state_handler() to
sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h.

Touching sysemu/sysemu.h now recompiles some 1800 objects.
qemu/uuid.h also drops from 5400 to 1800.  A few more headers show
smaller improvement: qemu/notify.h drops from 5600 to 5200,
qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from
5500 to 5000.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-28-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00
Markus Armbruster
12e9493df9 Include hw/boards.h a bit less
hw/boards.h pulls in almost 60 headers.  The less we include it into
headers, the better.  As a first step, drop superfluous inclusions,
and downgrade some more to what's actually needed.  Gets rid of just
one inclusion into a header.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
a27bd6c779 Include hw/qdev-properties.h less
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h.  Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
d645427057 Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get VMStateDescription.  The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed.  Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
64552b6be4 Include hw/irq.h a lot less
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.

Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed.  Touching it now recompiles only some 500 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
71e8a91585 Include sysemu/reset.h a lot less
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

The main culprit is hw/hw.h, which supposedly includes it for
convenience.

Include sysemu/reset.h only where it's needed.  Touching it now
recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
2ae16a6aa4 Include generated QAPI headers less
Some of the generated qapi-types-MODULE.h are included all over the
place.  Changing a QAPI type can trigger massive recompiling.  Top
scorers recompile more than 1000 out of some 6600 objects (not
counting tests and objects that don't depend on qemu/osdep.h):

    6300 qapi/qapi-builtin-types.h
    5700 qapi/qapi-types-run-state.h
    3900 qapi/qapi-types-common.h
    3300 qapi/qapi-types-sockets.h
    3000 qapi/qapi-types-misc.h
    3000 qapi/qapi-types-crypto.h
    3000 qapi/qapi-types-job.h
    3000 qapi/qapi-types-block-core.h
    2800 qapi/qapi-types-block.h
    1300 qapi/qapi-types-net.h

Clean up headers to include generated QAPI headers only where needed.
Impact is negligible except for hw/qdev-properties.h.

This header includes qapi/qapi-types-block.h and
qapi/qapi-types-misc.h.  They are used only in expansions of property
definition macros such as DEFINE_PROP_BLOCKDEV_ON_ERROR() and
DEFINE_PROP_OFF_AUTO().  Moving their inclusion from
hw/qdev-properties.h to the users of these macros avoids pointless
recompiles.  This is how other property definition macros, such as
DEFINE_PROP_NETDEV(), already work.

Improves things for some of the top scorers:

    3600 qapi/qapi-types-common.h
    2800 qapi/qapi-types-sockets.h
     900 qapi/qapi-types-misc.h
    2200 qapi/qapi-types-crypto.h
    2100 qapi/qapi-types-job.h
    2100 qapi/qapi-types-block-core.h
     270 qapi/qapi-types-block.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-3-armbru@redhat.com>
2019-08-16 13:31:51 +02:00
Evgeny Yakovlev
ee4b0c8686 i386/acpi: show PCI Express bus on pxb-pcie expanders
Show PCIe host bridge PNP id with PCI host bridge as a compatible id
when expanding a pcie bus.

Cc: qemu-stable@nongnu.org
Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru>
Message-Id: <1563526469-15588-1-git-send-email-wrfsh@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-25 04:17:35 -04:00
Evgeny Yakovlev
21e2acd583 i386/acpi: fix gint overflow in crs_range_compare
When very large regions (32GB sized in our case, PCI pass-through of GPUs)
are compared substraction result does not fit into gint.

As a result crs_replace_with_free_ranges does not get sorted ranges and
incorrectly computes PCI64 free space regions. Which then makes linux
guest complain about device and PCI64 hole intersection and device
becomes unusable.

Fix that by returning exactly fitting ranges.

Also fix indentation of an entire crs_replace_with_free_ranges to make
checkpatch happy.

Cc: qemu-stable@nongnu.org
Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru>
Message-Id: <1563466463-26012-1-git-send-email-wrfsh@yandex-team.ru>
Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru>
2019-07-25 04:17:35 -04:00
Alex Bennée
6d314626cc hw/i386: also turn off VMMOUSE is VMPORT is disabled
Commit 97fd1ea8c1 broke the build for --without-default-devices as
VMMOUSE depends on VMPORT.

Fixes: 97fd1ea8c1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-23 15:53:25 +01:00
Julio Montes
97fd1ea8c1 hw/i386: turn off vmport if CONFIG_VMPORT is disabled
vmport device is not included when CONFIG_VMPORT is disabled, hence
QEMU fails with the following error:

`Unknown device 'vmport' for bus 'ISA': unknown.`

v2: imply VMPORT (Paolo Bonzini )

Signed-off-by: Julio Montes <julio.montes@intel.com>
Message-Id: <20190712160257.18270-1-julio.montes@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15 11:20:42 +02:00
Peter Maydell
c4107e8208 Bugfixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJdH7FgAAoJEL/70l94x66DdUUH+gLr/ZdjLIdfYy9cjcnevf4E
 cJlxdaW9KvUsK2uVgqQ/3b1yF+GCGk10n6n8ZTIbClhs+6NpqEMz5O3FA/Na6FGA
 48M2DwJaJ2H9AG/lQBlSBNUZfLsEJ9rWy7DHvNut5XMJFuWGwdtF/jRhUm3KqaRq
 vAaOgcQHbzHU9W8r1NJ7l6pnPebeO7S0JQV+82T/ITTz2gEBDUkJ36boO6fedkVQ
 jLb9nZyG3CJXHm2WlxGO4hkqbLFzURnCi6imOh2rMdD8BCu1eIVl59tD1lC/A0xv
 Pp3xXnv9SgJXsV4/I/N3/nU85ZhGVMPQZXkxaajHPtJJ0rQq7FAG8PJMEj9yPe8=
 =poke
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Bugfixes.

# gpg: Signature made Fri 05 Jul 2019 21:21:52 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  ioapic: use irq number instead of vector in ioapic_eoi_broadcast
  hw/i386: Fix linker error when ISAPC is disabled
  Makefile: generate header file with the list of devices enabled
  target/i386: kvm: Fix when nested state is needed for migration
  minikconf: do not include variables from MINIKCONF_ARGS in config-all-devices.mak
  target/i386: fix feature check in hyperv-stub.c
  ioapic: clear irq_eoi when updating the ioapic redirect table entry
  intel_iommu: Fix unexpected unmaps during global unmap
  intel_iommu: Fix incorrect "end" for vtd_address_space_unmap
  i386/kvm: Fix build with -m32
  checkpatch: do not warn for multiline parenthesized returned value
  pc: fix possible NULL pointer dereference in pc_machine_get_device_memory_region_size()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-08 10:26:18 +01:00
Julio Montes
60386ea270 hw/i386: Fix linker error when ISAPC is disabled
v2: include config-devices.h to use CONFIG_IDE_ISA

Message-Id: <20190705143554.10295-2-julio.montes@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Julio Montes <julio.montes@intel.com>
2019-07-05 22:19:59 +02:00
Peter Xu
9a4bb8391f intel_iommu: Fix unexpected unmaps during global unmap
This is an replacement work of Yan Zhao's patch:

https://www.mail-archive.com/qemu-devel@nongnu.org/msg625340.html

vtd_address_space_unmap() will do proper page mask alignment to make
sure each IOTLB message will have correct masks for notification
messages (2^N-1), but sometimes it can be expanded to even supercede
the registered range.  That could lead to unexpected UNMAP of already
mapped regions in some other notifiers.

Instead of doing mindless expension of the start address and address
mask, we split the range into smaller ones and guarantee that each
small range will have correct masks (2^N-1) and at the same time we
should also try our best to generate as less IOTLB messages as
possible.

Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Message-Id: <20190624091811.30412-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05 22:16:46 +02:00
Yan Zhao
d6d10793dc intel_iommu: Fix incorrect "end" for vtd_address_space_unmap
IOMMUNotifier is with inclusive ranges, so we should check
against (VTD_ADDRESS_SIZE(s->aw_bits) - 1).

Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
[peterx: split from another bigger patch]
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190624091811.30412-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05 22:16:46 +02:00
Igor Mammedov
58164eaff5 pc: fix possible NULL pointer dereference in pc_machine_get_device_memory_region_size()
QEMU will crash when device-memory-region-size property is read if ms->device_memory
wasn't initialized yet.

Crash can be reproduced with:
 $QEMU -preconfig -qmp unix:qmp_socket,server,nowait &
 ./scripts/qmp/qom-get -s qmp_socket /machine.device-memory-region-size

Instead of crashing return 0 if ms->device_memory hasn't been initialized.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1560174635-22602-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05 22:16:45 +02:00
Eduardo Habkost
0788a56bd1 i386: Make unversioned CPU models be aliases
This will make unversioned CPU models behavior depend on the
machine type:

* "pc-*-4.0" and older will not report them as aliases.
  This is done to keep compatibility with older QEMU versions
  after management software starts translating aliases.

* "pc-*-4.1" will translate unversioned CPU models to -v1.
  This is done to keep compatibility with existing management
  software, that still relies on CPU model runnability promises.

* "none" will translate unversioned CPU models to their latest
  version.  This is planned become the default in future machine
  types (probably in pc-*-4.3).

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-8-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:04 -03:00
Like Xu
1b45842203 vl.c: Add -smp, dies=* command line support and update doc
For PC target, users could configure the number of dies per one package
via command line with this patch, such as "-smp dies=2,cores=4".

The parsing rules of new cpu-topology model obey the same restrictions/logic
as the legacy socket/core/thread model especially on missing values computing.

Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190620054525.37188-4-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:04 -03:00
Like Xu
6f479566a8 machine: Refactor smp_parse() in vl.c as MachineClass::smp_parse()
To make smp_parse() more flexible and expansive, a smp_parse function
pointer is added to MachineClass that machine types could override.

The generic smp_parse() code in vl.c is moved to hw/core/machine.c, and
become the default implementation of MachineClass::smp_parse. A PC-specific
function called pc_smp_parse() has been added to hw/i386/pc.c, which in
this patch changes nothing against the default one .

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190620054525.37188-3-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:04 -03:00
Igor Mammedov
cd5ff8333a machine: show if CLI option '-numa node,mem' is supported in QAPI schema
Legacy '-numa node,mem' option has a number of issues and mgmt often
defaults to it. Unfortunately it's no possible to replace it with
an alternative '-numa memdev' without breaking migration compatibility.
What's possible though is to deprecate it, keeping option working with
old machine types only.

In order to help users to find out if being deprecated CLI option
'-numa node,mem' is still supported by particular machine type, add new
"numa-mem-supported" property to output of query-machines.

"numa-mem-supported" is set to 'true' for machines that currently support
NUMA, but it will be flipped to 'false' later on, once deprecation period
expires and kept 'true' only for old machine types that used to support
the legacy option so it won't break existing configuration that are using
it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1560172207-378962-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:03 -03:00
Igor Mammedov
fc3b77e20d pc: fix possible NULL pointer dereference in pc_machine_get_device_memory_region_size()
QEMU will crash when device-memory-region-size property is read if ms->device_memory
wasn't initialized yet.

Crash can be reproduced with:
 $QEMU -preconfig -qmp unix:qmp_socket,server,nowait &
 ./scripts/qmp/qom-get -s qmp_socket /machine.device-memory-region-size

Instead of crashing return 0 if ms->device_memory hasn't been initialized.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190624090200.5383-1-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:03 -03:00
Like Xu
d65af288a8 i386: Update new x86_apicid parsing rules with die_offset support
In new sockets/dies/cores/threads model, the apicid of logical cpu could
imply die level info of guest cpu topology thus x86_apicid_from_cpu_idx()
need to be refactored with #dies value, so does apicid_*_offset().

To keep semantic compatibility, the legacy pkg_offset which helps to
generate CPUIDs such as 0x3 for L3 cache should be mapping to die_offset.

Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-5-like.xu@linux.intel.com>
[ehabkost: squash unit test patch]
Message-Id: <20190612084104.34984-6-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:03 -03:00
Like Xu
176d2cda0d i386/cpu: Consolidate die-id validity in smp context
The field die_id (default as 0) and has_die_id are introduced to X86CPU.
Following the legacy smp check rules, the die_id validity is added to
the same contexts as leagcy smp variables such as hmp_hotpluggable_cpus(),
machine_set_cpu_numa_node(), cpu_slot_to_string() and pc_cpu_pre_plug().

Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-4-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:03 -03:00
Like Xu
cabea7dcd0 hw/i386: Adjust nr_dies with configured smp_dies for PCMachine
To support multiple dies configuration on PCMachine, the best place to
set CPUX86State->nr_dies with requested PCMachineState->smp_dies is in
pc_new_cpu() and pc_cpu_pre_plug(). Refactoring pc_new_cpu() is applied
and redundant parameter "const char *typename" would be removed.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-3-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:03 -03:00
Like Xu
c26ae61081 i386: Add die-level cpu topology to x86CPU on PCMachine
The die-level as the first PC-specific cpu topology is added to the leagcy
cpu topology model, which has one die per package implicitly and only the
numbers of sockets/cores/threads are configurable.

In the new model with die-level support, the total number of logical
processors (including offline) on board will be calculated as:

     #cpus = #sockets * #dies * #cores * #threads

and considering compatibility, the default value for #dies would be
initialized to one in x86_cpu_initfn() and pc_machine_initfn().

Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-2-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:03 -03:00
Like Xu
0e11fc6955 hw/i386: Replace global smp variables with machine smp properties
The global smp variables in i386 are replaced with smp machine properties.
To avoid calling qdev_get_machine() as much as possible, some related funtions
for acpi data generations are refactored. No semantic changes.

A local variable of the same name would be introduced in the declaration
phase if it's used widely in the context OR replace it on the spot if it's
only used once. No semantic changes.

Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190518205428.90532-8-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:08:03 -03:00
Like Xu
a0628599fa machine: Refactor smp-related call chains to pass MachineState
To get rid of the global smp_* variables we're currently using, it's recommended
to pass MachineState in the list of incoming parameters for functions that use
global smp variables, thus some redundant parameters are dropped. It's applied
for legacy smbios_*(), *_machine_reset(), hot_add_cpu() and mips *_create_cpu().

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-3-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:07:36 -03:00
Peter Maydell
c35d17cabc virtio, pc, pci: features, fixes, cleanups
virtio-pmem support.
 libvhost user mq support.
 A bunch of fixes all over the place.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEbBAABAgAGBQJdHmkBAAoJECgfDbjSjVRpEAIH+Kmy8n5Et9NzsnmNqHAiC/pg
 3V5wGyp9M4ZJVPXC0z/Q1sYJ3YYP6dBd4tjj2/7LzYZSlqlQIs83UlQCo0XTiliH
 /jZD/IaAZABnfB7vAeZW67WNT2a20xG2Jr83083lSaDUI/pfIdvbMelIbBLmo/kd
 tWdAAWT0kcGYjyz4xQQgtAH6zAQUleKE7ECUJ2TpJQbSMLxdI/YTaoYqek471YdP
 ju5OLBO3WbNkSE9JYz4MJqTudYK0sKu568UqBVF8JdpFd5Cv+X/OI+bCsc4QK8KN
 DTtFVVvbm1KGPSceqc9rwsDjO4Wd8ThvuZxrB029AahD6vT82F13IHpi/S29Fw==
 =WAFb
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc, pci: features, fixes, cleanups

virtio-pmem support.
libvhost user mq support.
A bunch of fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 04 Jul 2019 22:00:49 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (22 commits)
  docs: avoid vhost-user-net specifics in multiqueue section
  libvhost-user: implement VHOST_USER_PROTOCOL_F_MQ
  libvhost-user: support many virtqueues
  libvhost-user: add vmsg_set_reply_u64() helper
  pc: Move compat_apic_id_mode variable to PCMachineClass
  virtio: Don't change "started" flag on virtio_vmstate_change()
  virtio: Make sure we get correct state of device on handle_aio_output()
  virtio: Set "start_on_kick" on virtio_set_features()
  virtio: Set "start_on_kick" for legacy devices
  virtio: add "use-started" property
  virtio-pci: fix missing device properties
  pc: Support for virtio-pmem-pci
  numa: Handle virtio-pmem in NUMA stats
  hmp: Handle virtio-pmem when printing memory device infos
  virtio-pci: Proxy for virtio-pmem
  virtio-pmem: sync linux headers
  virtio-pci: Allow to specify additional interfaces for the base type
  virtio-pmem: add virtio device
  pcie: minor cleanups for slot control/status
  pcie: work around for racy guest init
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-05 09:51:50 +01:00
Eduardo Habkost
457cfcccdd pc: Move compat_apic_id_mode variable to PCMachineClass
Replace the static variable with a PCMachineClass field.  This
will help us eventually get rid of the pc_compat_*() init
functions.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628200227.1053-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04 17:00:32 -04:00
David Hildenbrand
a0a49813f7 pc: Support for virtio-pmem-pci
Override the device hotplug handler to properly handle the memory device
part via virtio-pmem-pci callbacks from the machine hotplug handler and
forward to the actual PCI bus hotplug handler.

As PCI hotplug has not been properly factored out into hotplug handlers,
most magic is performed in the (un)realize functions. Also some PCI host
buses don't have a PCI hotplug handler at all yet, just to be sure that
we alway have a hotplug handler on x86, add a simple error check.

Unlocking virtio-pmem will unlock virtio-pmem-pci.

Signed-off-by: David Hildenbrand <david@redhat.com>
[ Disable virtio-pmem hotunplug ]
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190619094907.10131-8-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04 17:00:32 -04:00
Anthony PERARD
6e8d459353 xen: Drop includes of xen/hvm/params.h
xen-mapcache.c doesn't needs params.h.

xen-hvm.c uses defines available in params.h but so is xen_common.h
which is included before. HVM_PARAM_* flags are only needed to make
xc_hvm_param_{get,set} calls so including only xenctrl.h, which is
where the definition the function is, should be enough.
(xenctrl.h does include params.h)

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190618112341.513-4-anthony.perard@citrix.com>
2019-06-24 10:42:30 +01:00
Anthony PERARD
34fbbc164f xen: Avoid VLA
Avoid using a variable length array.

We allocate the `dirty_bitmap' buffer only once when we start tracking
for dirty bits.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190618112341.513-5-anthony.perard@citrix.com>
2019-06-24 10:42:30 +01:00
Greg Kurz
8e8cbed09a hw: Nuke hw_compat_4_0_1 and pc_compat_4_0_1
Commit c87759ce87 fixed a regression affecting pc-q35 machines by
introducing a new pc-q35-4.0.1 machine version to be used instead
of pc-q35-4.0. The only purpose was to revert the default behaviour
of not using split irqchip, but the change also introduced the usual
hw_compat and pc_compat bits, and wired them for pc-q35 only.

This raises questions when it comes to add new compat properties for
4.0* machine versions of any architecture. Where to add them ? In
4.0, 4.0.1 or both ? Error prone. Another possibility would be to teach
all other architectures about 4.0.1. This solution isn't satisfying,
especially since this is a pc-q35 specific issue.

It turns out that the split irqchip default is handled in the machine
option function and doesn't involve compat lists at all.

Drop all the 4.0.1 compat lists and use the 4.0 ones instead in the 4.0.1
machine option function.

Move the compat props that were added to the 4.0.1 since c87759ce87 to
4.0.

Even if only hw_compat_4_0_1 had an impact on other architectures,
drop pc_compat_4_0_1 as well for consistency.

Fixes: c87759ce87 "q35: Revert to kernel irqchip"
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <156051774276.244890.8660277280145466396.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21 13:25:29 +02:00
Vitaly Kuznetsov
2d384d7c83 i386/kvm: convert hyperv enlightenments properties from bools to bits
Representing Hyper-V properties as bits will allow us to check features
and dependencies between them in a natural way.

Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21 02:29:38 +02:00
Gerd Hoffmann
4a4418369d q35: fix mmconfig and PCI0._CRS
This patch changes the handling of the mmconfig area.  Thanks to the
pci(e) expander devices we already have the logic to exclude address
ranges from PCI0._CRS.  We can simply add the mmconfig address range
to the list get it excluded as well.

With that in place we can go with a fixed pci hole which covers the
whole area from the end of (low) ram to the ioapic.

This will make the whole logic alot less fragile.  No matter where the
firmware places the mmconfig xbar, things should work correctly.  The
guest also gets a bit more PCI address space (seabios boot):

    # cat /proc/iomem
    [ ... ]
    7ffdd000-7fffffff : reserved
    80000000-afffffff : PCI Bus 0000:00            <<-- this is new
    b0000000-bfffffff : PCI MMCONFIG 0000 [bus 00-ff]
      b0000000-bfffffff : reserved
    c0000000-febfffff : PCI Bus 0000:00
      f8000000-fbffffff : 0000:00:01.0
    [ ... ]

So this is a guest visible change.

Cc: László Érsek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190607073429.3436-1-kraxel@redhat.com>
2019-06-16 16:16:52 -04:00
Wei Yang
82f76c6702 hw/acpi: extract acpi_add_rom_blob()
arm and i386 has almost the same function acpi_add_rom_blob(), except
giving different FWCfgCallback function.

This patch moves acpi_add_rom_blob() to utils.c by passing
FWCfgCallback to it.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

v7:
  * rebase on top of current master because of conflict
v6:
  * change author from Igor to Michael
v5:
  * remove unnecessary header glib/gprintf.h
  * rearrange include header to make it more suitable
v4:
  * extract -> moves
  * adjust comment in source to make checkpatch happy
v3:
  * put acpi_add_rom_blob() to hw/acpi/utils.c
v2:
  * remove unused header in original source file
Message-Id: <20190610011830.28398-1-richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-16 16:16:52 -04:00
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster
0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Markus Armbruster
14a48c1d0d qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h.  Only tcg_enabled() & friends sit in
qemu-common.h.  This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.

Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
2019-06-11 20:22:09 +02:00
Richard Henderson
6aa9e42f27 target/i386: Use env_cpu, env_archcpu
Cleanup in the boilerplate that each target must define.
Replace x86_env_get_cpu with env_archcpu.  The combination
CPU(x86_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Peter Maydell
347a6f44e9 virtio, pci, pc: cleanups, features
stricter rules for acpi tables: we now fail
 on any difference that isn't whitelisted.
 
 vhost-scsi migration.
 
 some cleanups all over the place
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJc+B4YAAoJECgfDbjSjVRpq1EIAJR7tCxcpu9GggVlinmUA8G4
 tmSAe06IryH7+nF3RsnINuGu7ius9qC2/E2y0uJUHhTqiU/RWOfWZ7PPM0EcYZaA
 TLPaCe2NUF6/8afeqmvE9Usk7VspI5TDZRms+bonmZz2xP1lHIMN0qW4s7HHLWr8
 sZKDtCJ+9cYII93VQwtlR0qiHgv5f0kzcuZeJaZHsAHH6XZGqRuQjI6txcFa4o53
 lkdLCEwTnRuwu2wyL84eL5p+E8SzOgR/x1QI+nffrJfsvnmiT7lnOrkjnQlWAp5G
 xqwqsUrUxUCuQ+zitwJqmv+H6nx79MwAM7fTHAETCWX703N5o9tZxAnHHqLoa8I=
 =cQNg
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pci, pc: cleanups, features

stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.

vhost-scsi migration.

some cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 05 Jun 2019 20:55:04 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  bios-tables-test: ignore identical binaries
  tests: acpi: add simple arm/virt testcase
  tests: add expected ACPI tables for arm/virt board
  bios-tables-test: list all tables that differ
  vhost-scsi: Allow user to enable migration
  vhost-scsi: Add VMState descriptor
  vhost-scsi: The vhost backend should be stopped when the VM is not running
  bios-tables-test: add diff allowed list
  vhost: fix memory leak in vhost_user_scsi_realize
  vhost: fix incorrect print type
  vhost: remove the dead code
  docs: smbios: remove family=x from type2 entry description
  pci: Fold pci_get_bus_devfn() into its sole caller
  pci: Make is_bridge a bool
  pcie: Simplify pci_adjust_config_limit()
  acpi: pci: use build_append_foo() API to construct MCFG
  hw/acpi: Consolidate build_mcfg to pci.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-06 12:52:31 +01:00
Alex Williamson
c87759ce87 q35: Revert to kernel irqchip
Commit b2fc91db84 ("q35: set split kernel irqchip as default") changed
the default for the pc-q35-4.0 machine type to use split irqchip, which
turned out to have disasterous effects on vfio-pci INTx support.  KVM
resampling irqfds are registered for handling these interrupts, but
these are non-functional in split irqchip mode.  We can't simply test
for split irqchip in QEMU as userspace handling of this interrupt is a
significant performance regression versus KVM handling (GeForce GPUs
assigned to Windows VMs are non-functional without forcing MSI mode or
re-enabling kernel irqchip).

The resolution is to revert the change in default irqchip mode in the
pc-q35-4.1 machine and create a pc-q35-4.0.1 machine for the 4.0-stable
branch.  The qemu-q35-4.0 machine type should not be used in vfio-pci
configurations for devices requiring legacy INTx support without
explicitly modifying the VM configuration to use kernel irqchip.

Link: https://bugs.launchpad.net/qemu/+bug/1826422
Fixes: b2fc91db84 ("q35: set split kernel irqchip as default")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <155786484688.13873.6037015630912983760.stgit@gimli.home>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-03 14:03:03 +02:00
Wei Yang
f13a944ca6 hw/acpi: Consolidate build_mcfg to pci.c
Now we have two identical build_mcfg functions.

Consolidate them in acpi/pci.c.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>

v4:
  * ACPI_PCI depends on both ACPI and PCI
  * rebase on latest master, adjust arm Kconfig
v3:
  * adjust changelog based on Igor's suggestion
Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-29 18:00:57 -04:00
Philippe Mathieu-Daudé
bd3f680f66 hw/i386: Implement fw_cfg_arch_key_name()
Implement fw_cfg_arch_key_name(), which returns the name of a
i386-specific key.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-5-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-23 14:10:31 +02:00
Philippe Mathieu-Daudé
87abaa5d8c hw/i386: Extract fw_cfg definitions to local "fw_cfg.h"
Extract the architecture-specific fw_cfg definitions to "fw_cfg.h".

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-23 14:10:31 +02:00
Wei Yang
48cefd94c7 hw/arm/virt-acpi-build: pass AcpiMcfgInfo to build_mcfg()
To build MCFG, two information is necessary:

    * bus number
    * base address

Abstract these two information to AcpiMcfgInfo so that build_mcfg and
build_mcfg_q35 will have the same declaration.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

Message-Id: <20190419003053.8260-5-richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Wei Yang
c309434ee9 i386, acpi: remove mcfg_ prefix in AcpiMcfgInfo members
This is obvious the member in AcpiMcfgInfo describe MCFG's property.

Remove the mcfg_ prefix.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190419003053.8260-4-richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Igor Mammedov
fe4970ad46 q35: acpi: do not create dummy MCFG table
Dummy table (with signature "QEMU") creation came from original SeaBIOS
codebase. And QEMU would have to keep it around if there were Q35 machine
that depended on keeping ACPI tables blob constant size. Luckily there
were no versioned Q35 machine types before commit:
  (since 2.3) a1666142db acpi-build: make ROMs RAM blocks resizeable
which obsoleted need to keep ACPI tables blob the same size on source/destination.

Considering the 1st versioned machine is pc-q35-2.4, the dummy table
is not really necessary and it's safe to drop it without breaking
cross version migration in both directions unconditionally.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1554822037-329838-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Philippe Mathieu-Daudé
6fa5171f4f hw/i386/acpi: Assert a pointer is not null BEFORE using it
Commit 72c194f7e7 added a non-null check on the 'obj' pointer.
Later, commit 500b11ea50 added code which uses the 'obj'
pointer _before_ the assertion check. Move the assertion
_before_ the pointer use.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427144025.22880-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-17 15:19:32 +02:00
Philippe Mathieu-Daudé
81c48dd796 hw/i386/acpi: Add object_resolve_type_unambiguous to improve modularity
When building with CONFIG_Q35=n, we get:

    LINK    x86_64-softmmu/qemu-system-x86_64
  /usr/bin/ld: hw/i386/acpi-build.o: in function `acpi_get_misc_info':
  /source/qemu/hw/i386/acpi-build.c:243: undefined reference to `ich9_lpc_find'
  collect2: error: ld returned 1 exit status
  make[1]: *** [Makefile:204: qemu-system-x86_64] Error 1

This is due to a dependency in acpi-build.c on the ICH9_LPC
(via ich9_lpc_find) and PIIX4_PM (via piix4_pm_find) devices.

To allow better modularity (compile acpi-build.c with only
Q35/ICH9 or ISAPC/PIIX4), refactor the similar helper as
object_resolve_type_unambiguous(). This way we relax the
linker dependencies and can build the x86 targets with a
selection of machines (instead of all of them).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427144025.22880-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-17 15:19:24 +02:00
Peter Maydell
e24f44dbea Kconfig settings for the Arm machines
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJc2SifAAoJEC7Z13T+cC21vyAQAJe3IrtArFD+3lNB30BfVYP0
 PT7J//C4wH/E+nAZ7bx6K/MMkutNJyMJArpYGqHk+KGm9oJvVfm9fOZKjUF0rJVo
 /WiXH96Ux8eBI0fFUv+ZLCXGWwALIC0N3LeoHbxuwhUBfKd6vv+trddksx/RQjvo
 dWA5aVwQAYm106Bj/Q6loeXyIVeWkrRxwCEcnAygCLGHFSsXJ9gj2js8OHCywLVo
 kV5KIdaLUw20xh9u6mfNS79Jhe7kHz58GIAMg7VwPZqmiTZJSOMb1uZ6eXk+cGBb
 3I2VE7RfEprd+9tE9aEiu1s7mCsW/Kh9NeWQBjiGwTwsja7ewMy08ugqzFFTtyE+
 M1kf/8D/xyhRnyeNQUR+2BlcDKeTxmaK1Ndk4ybu9QnRcye4ieZLLGDMqKZdiT9U
 vwcilGd0QoxmLXXGTNTcW3sRFl2HDg/h8kaH+9dFZSSMb/T4TaoGebpAT013pSou
 t6EWn5QhLu90ptbv57N/4YMRmjg6kvCytl5XMenEoY4cx0bFXkQE8lFv4WTCB9Sv
 wv5QXA6VbmcIdHfnIFkhxU5kUonLWWiFPdCcbLmqG74OCssr17fq9+BDxC4umMxb
 UTnpxegTX4JcpIup1rvV8vN5J/EBbtrhl+qzCwf+ErK+S34xRqXC80ZWxi0JBleV
 BJLdKdD6oJk+xMznju2/
 =wO8o
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-05-13' into staging

Kconfig settings for the Arm machines

# gpg: Signature made Mon 13 May 2019 09:19:43 BST
# gpg:                using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2019-05-13: (29 commits)
  hw/arm: Remove hard-enablement of the remaining PCI devices
  hw/arm: Express dependencies of the musca machines with Kconfig
  hw/arm: Express dependencies of the xlnx-versal-virt machine with Kconfig
  hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig
  hw/arm: Express dependencies of the microbit / nrf51 machine with Kconfig
  hw/arm: Express dependencies of the remaining IMX boards with Kconfig
  hw/arm: Express dependencies of the MSF2 / EMCRAFT_SF2 machine with Kconfig
  hw/arm: Express dependencies of sabrelite with Kconfig
  hw/arm: Express dependencies of canon-a1100 with Kconfig
  hw/arm: Express dependencies of the raspi machines with Kconfig
  hw/arm: Express dependencies of the MPS2 boards with Kconfig
  hw/arm: Express dependencies of allwinner / cubieboard with Kconfig
  hw/arm: Express dependencies of netduino / stm32f2xx with Kconfig
  hw/arm: Express dependencies of the virt machine with Kconfig
  hw/arm: Express dependencies of the aspeed boards with Kconfig
  hw/arm: Express dependencies of collie with Kconfig
  hw/arm: Express dependencies of xilinx-zynq with Kconfig
  hw/arm: Express dependencies of the PXA2xx machines with Kconfig
  hw/arm: Express dependencies of realview, versatile and vexpress with Kconfig
  hw/arm: Express dependencies of stellaris with Kconfig
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-13 16:52:56 +01:00
Thomas Huth
9a585f3ea6 hw/ide/ahci: Add a Kconfig switch for the AHCI-ICH9 device
Some of our machines (like the ARM cubieboard) use CONFIG_AHCI for an AHCI
sysbus device, but do not use CONFIG_PCI since they do not feature a PCI
bus. With CONFIG_AHCI but without CONFIG_PCI, currently linking fails:

    ../hw/ide/ich.o: In function `pci_ich9_ahci_realize':
    hw/ide/ich.c:124: undefined reference to `pci_allocate_irq'
    hw/ide/ich.c:126: undefined reference to `pci_register_bar'
    hw/ide/ich.c:128: undefined reference to `pci_register_bar'
    hw/ide/ich.c:131: undefined reference to `pci_add_capability'
    hw/ide/ich.c:147: undefined reference to `msi_init'
    ../hw/ide/ich.o: In function `pci_ich9_uninit':
    hw/ide/ich.c:158: undefined reference to `msi_uninit'
    ../hw/ide/ich.o:(.data.rel+0x50): undefined reference to `vmstate_pci_device'

We must only compile ich.c if CONFIG_PCI is available, too, so introduce a
new config switch for this device.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13 09:36:31 +02:00
Markus Armbruster
a8b991b52d Clean up ill-advised or unusual header guards
Leading underscores are ill-advised because such identifiers are
reserved.  Trailing underscores are merely ugly.  Strip both.

Our header guards commonly end in _H.  Normalize the exceptions.

Done with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]
2019-05-13 08:58:55 +02:00
Markus Armbruster
2d731dbd5e pflash_cfi01: New pflash_cfi01_legacy_drive()
Factored out of pc_system_firmware_init() so the next commit can reuse
it in hw/arm/virt.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190416091348.26075-3-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-07 12:55:02 +01:00
Markus Armbruster
c8d8ef00a1 pc: Rearrange pc_system_firmware_init()'s legacy -drive loop
The loop does two things: map legacy -drive to properties, and collect
all the backends for use after the loop.  The next patch will factor
out the former for reuse in hw/arm/virt.c.  To make that easier,
rearrange the loop so it does the first thing first, and the second
thing second.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190416091348.26075-2-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-07 12:55:01 +01:00
Peter Maydell
db7f1c3faf x86 queue, 2019-04-25
* Hygon Dhyana CPU model (Pu Wen)
 * Categorize a few devices in hw/i386 (Ernest Esene)
 * Support host-cache-info on TOPOEXT CPUID leaf (Stanislav Lanci)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJcwfiJAAoJECgHk2+YTcWm+c4QALOcxwskQAjUqclh+nc3GSWR
 FRk5wKQjDCrY8GyPVS0FoPiB1DltYoYv8np7J01mdCdmjgdgJh+iveD01LnCZCU5
 H70F7SdfQ1s8u7COtqckC5PumQQCgElu2A21enQadX/y7sSw4Tz1KdOUYgFenwYL
 ltmdbav+VkZdakPgEEa5B4bvWthGiHWc1aStwHGQwa2VnboH2E1XxlppTvvXFbae
 liNHBUfcWZ5oVjByDnwC+PqktBqZqRl67p0u4JSUkKaqglcSH6tuJA3eL4hkOU0n
 A+7XDd1wQSkQnj3eL27o0J2hKfzcHXjJTAMOCTwayv4X9FIGtCqofbbWjlrTIBV5
 MbNl30UtaZE4V7hxJ+QOZ9w5zZzd+wU65Rs9kq0tVAnP7UPtQEgR+lgED6yANJoc
 Gc3NCaQXX3yGsTCaT4pk6J8NGdiOcZyIk3UFpxTCzjs6gAcgD+1XlwHIz/9JNDV2
 dTFhBq7BQ7sb9c5tf7NfxobWWoYaR2pDo49G4O+r4xzICjKQyFzRIY2d/0RseKe0
 QBqMSXp1qZyLGSR4XwX1EkSZtrZAjWIyXO7e9QVkgsWsqsj1Z/KkggJYeLld49xF
 CVaI2hJErYVIh9jSnsY8Gr2OB6aTksGgu/BKl+OsF2vjtvWVstbpi+jyOWfwhnH2
 kU3psD6jx3v/sr+cr4Rj
 =72Bz
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging

x86 queue, 2019-04-25

* Hygon Dhyana CPU model (Pu Wen)
* Categorize a few devices in hw/i386 (Ernest Esene)
* Support host-cache-info on TOPOEXT CPUID leaf (Stanislav Lanci)

# gpg: Signature made Thu 25 Apr 2019 19:12:25 BST
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-next-pull-request:
  Pass through cache information for TOPOEXT CPUs
  Categorize devices: iommu
  Categorize devices: IGD passthrough ISA bridge
  i386: Add new Hygon 'Dhyana' CPU model

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-26 16:38:04 +01:00
Ernest Esene
1ec202c9be Categorize devices: iommu
Set category and description for iommu devices.

Signed-off-by: Ernest Esene <eroken1@gmail.com>
Message-Id: <20190327170518.GA16887@erokenlabserver>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: edited commit message]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-04-25 14:52:28 -03:00
Ernest Esene
965242dbf4 Categorize devices: IGD passthrough ISA bridge
Set category for the device.

Signed-off-by: Ernest Esene <eroken1@gmail.com>
Message-Id: <20190327133714.GA9329@erokenlabserver>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: edited commit message]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-04-25 14:52:28 -03:00
Cornelia Huck
9bf2650bc3 hw: add compat machines for 4.1
Add 4.1 machine types for arm/i440fx/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190411102025.22559-1-cohuck@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-04-25 14:16:41 -03:00
Thomas Huth
ae909496e9 hw/i386/pc: Fix crash when hot-plugging nvdimm on older machine types
QEMU currently crashes when you try to hot-plug an "nvdimm" device
on older machine types:

$ qemu-system-x86_64 -monitor stdio -M pc-1.1
QEMU 3.1.92 monitor - type 'help' for more information
(qemu) device_add nvdimm,id=nvdimmn1
qemu-system-x86_64: /home/thuth/devel/qemu/util/error.c:57: error_setv:
 Assertion `*errp == ((void *)0)' failed.
Aborted (core dumped)

The call to hotplug_handler_pre_plug() in pc_memory_pre_plug() has been
added recently before the check whether nvdimm is enabled. It should
be done after the check. And while we're at it, also check the errp
after the hotplug_handler_pre_plug(), otherwise errors are silently
ignored here.

Fixes: 9040e6dfa8
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190407092314.11066-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-09 18:34:21 +02:00
Peter Xu
81fb1e646e intel_iommu: Drop extended root field
VTD_RTADDR_RTT is dropped even by the VT-d spec, so QEMU should
probably do the same thing (after all we never really implemented it).
Since we've had a field for that in the migration stream, to keep
compatibility we need to fill the hole up.

Please refer to VT-d spec 10.4.6.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190329061422.7926-3-peterx@redhat.com>
Reviewed-by: Liu, Yi L <yi.l.liu@intel.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-04-02 11:49:14 -04:00
Peter Xu
2811af3b49 intel_iommu: Fix root_scalable migration breakage
When introducing the initial support for scalable mode we added a
new field into vmstate however we blindly migrate that field without
notice.  That'll break migration no matter forward or backward.

The normal way should be that we use something like
VMSTATE_UINT32_TEST() or subsections for the new vmstate field however
for this case of vt-d we can even make it simpler because we've
already migrated all the registers and it'll be fairly simple that we
re-generate root_scalable field from the register values during post
load of the device.

Fixes: fb43cf739e ("intel_iommu: scalable mode emulation")
Reviewed-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190329061422.7926-2-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-04-02 11:49:14 -04:00
Alex Williamson
75c5626c88 intel_iommu: Correct caching-mode error message
If we try to use the intel-iommu device with vfio-pci devices without
caching mode enabled, we're told:

  qemu-system-x86_64: We need to set caching-mode=1 for intel-iommu to enable
  device assignment with IOMMU protection.

But to enable caching mode, the option is actually "caching-mode=on".

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <155364147432.16467.15898335025013220939.stgit@gimli.home>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Williamson &lt;<a href="mailto:alex.williamson@redhat.com" target="_blank" rel="noreferrer">alex.williamson@redhat.com</a>&gt;<br>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-04-02 11:49:14 -04:00
Peter Maydell
84bdc58c06 * Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Peter)
 * Fix for SEV with VFIO (Brijesh)
 * Allow compilation without CONFIG_PARALLEL (Thomas)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlyTvvAUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNNwwf/RrtjBoqu8Ulu6k+HJczdpkhO44c5
 R7sidGaOBHVjT+EsaYZxanXQlsbpDPiXCRoMRMln+O3Kgso/UlVTLBfctIjuf5kp
 P8Amp8rw843yl3TQ+Xaqat1qtfVVN2xjRDoyRwWrTU5w52MVVsan2j1/XzGX/7Bb
 Y3gXRxsN7MyjDCXxhxVwQCxKU2ue3ytvnfdCnu1SNZxZEaFAyGprTNCCTXYugehl
 bVauAs/0qOZWEyvElinNEz+zbqMTm07ULAWBRXgCDcOudsidZFtu0Xl62dXlp1Ou
 0zkaoGiOdMM6OXZkLd6vOK8mY9XDuqaUZE3zAeFMJsK1wSnZdGUVCJO1Hw==
 =Pkcj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Peter)
* Fix for SEV with VFIO (Brijesh)
* Allow compilation without CONFIG_PARALLEL (Thomas)

# gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (23 commits)
  virtio-vga: only enable for specific boards
  config-all-devices.mak: rebuild on reconfigure
  minikconf: fix parser typo
  intel-iommu: optimize nodmar memory regions
  test-announce-self: convert to qgraph
  hw/alpha/Kconfig: DP264 hardware requires e1000 network card
  hw/hppa/Kconfig: Dino board requires e1000 network card
  hw/sh4/Kconfig: r2d machine requires the rtl8139 network card
  hw/ppc/Kconfig: e500 based machines require virtio-net-pci device
  hw/ppc/Kconfig: Bamboo machine requires e1000 network card
  hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices
  hw/mips/Kconfig: Malta machine requires the pcnet network card
  hw/i386/Kconfig: enable devices that can be created by default
  hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI
  hw/isa/Kconfig: i82378 SuperIO requires PC speaker device
  prep: do not select I82374
  hw/i386/Kconfig: PC uses I8257, not I82374
  hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL
  target/i386: sev: Do not pin the ram device memory region
  memory: Fix the memory region type assignment order
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/rdma/Makefile.objs
#	hw/riscv/sifive_plic.c
2019-03-28 09:18:53 +00:00
Markus Armbruster
a9779a3ab0 trace-events: Delete unused trace points
Tracked down with cleanup-trace-events.pl.  Funnies requiring manual
post-processing:

* block.c and blockdev.c trace points are in block/trace-events.

* hw/block/nvme.c uses the preprocessor to hide its trace point use
  from cleanup-trace-events.pl.

* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.

* net/colo-compare and net/filter-rewriter.c use pseudo trace points
  colo_compare_udp_miscompare and colo_filter_rewriter_debug to guard
  debug code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-5-armbru@redhat.com
Message-Id: <20190314180929.27722-5-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Markus Armbruster
500016e5db trace-events: Shorten file names in comments
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files.  That's because when trace-events got split up, the
comments were moved verbatim.

Delete the sub/dir/ part from these comments.  Gets rid of several
misspellings.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Markus Armbruster
e68b3baa25 trace-events: Consistently point to docs/devel/tracing.txt
Almost all trace-events point to docs/devel/tracing.txt in a comment
right at the beginning.  Touch up the ones that don't.

[Updated with Markus' new commit description wording.
--Stefan]

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-2-armbru@redhat.com
Message-Id: <20190314180929.27722-2-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:17:37 +00:00
Paolo Bonzini
938912a866 virtio-vga: only enable for specific boards
When virtio-vga was added, the intention was to only support it for
those machines where the firmware does not know about virtio-gpu,
and supported VGA legacy hardware before virtio-{gpu,vga} were
introduced.

The Kconfig switch however enabled virtio-vga for all machines with
a PCI bus, and libvirt then prefers it even on hardware where
virtio-gpu would be preferrable.  At least for now, only enable
virtio-vga for PC, hppa and pSeries machines, as was the case
before Kconfig dependencies were introduced.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-21 17:42:18 +01:00
Peter Xu
4b519ef1de intel-iommu: optimize nodmar memory regions
Previously we have per-device system memory aliases when DMAR is
disabled by the system.  It will slow the system down if there are
lots of devices especially when DMAR is disabled, because each of the
aliased system address space will contain O(N) slots, and rendering
such N address spaces will be O(N^2) complexity.

This patch introduces a shared nodmar memory region and for each
device we only create an alias to the shared memory region.  With the
aliasing, QEMU memory core API will be able to detect when devices are
sharing the same address space (which is the nodmar address space)
when rendering the FlatViews and the total number of FlatViews can be
dramatically reduced when there are a lot of devices.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190313094323.18263-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-20 11:44:13 +01:00
Philippe Mathieu-Daudé
09cba51e4f hw/i386/Kconfig: enable devices that can be created by default
This fixes when configuring with CONFIG_PCI_DEVICES=n:

  $ qemu-system-x86_64 -M q35
  qemu-system-x86_64: Unsupported NIC model: e1000e
  $ qemu-system-x86_64 -M pc
  qemu-system-x86_64: Unsupported NIC model: e1000

Fixes: 7c28b925b7
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190316200818.8265-4-philmd@redhat.com>
2019-03-20 11:44:13 +01:00
Paolo Bonzini
b377471ac8 hw/i386/Kconfig: PC uses I8257, not I82374
CONFIG_I82374 is not needed for PC machines, since they create
i8257 directly instead.

Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-20 11:44:07 +01:00
Roger Pau Monne
4158e93f4a xen-mapcache: use MAP_FIXED flag so the mmap address hint is always honored
Or if it's not possible to honor the hinted address an error is returned
instead. This makes it easier to spot the actual failure, instead of
failing later on when the caller of xen_remap_bucket realizes the
mapping has not been created at the requested address.

Also note that at least on FreeBSD using MAP_FIXED will cause mmap to
try harder to honor the passed address.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Igor Druzhinin <igor.druzhinin@cirtix.com>
Message-Id: <20190318173731.14494-1-roger.pau@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-03-19 15:32:13 +00:00
Thomas Huth
3e3fdad6e1 hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL
For the downstream distribution of QEMU, we want to compile without
CONFIG_PARALLEL. Commit 9157eee1b1 already moved the function
parallel_hds_isa_init() (which is still required for linking) into a file
that is included anyway, but commit bb3d5ea858 moved it
to a separate file which is only compiled again if CONFIG_PARALLEL is
set. To be able to link QEMU again without CONFIG_PARALLEL, the file
should be considered for linking for all targets that have CONFIG_ISA_BUS.
And while we're at it, add a proper comment in there with the rationale
for the separate file.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1552297854-25847-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-18 09:39:57 +01:00
Wei Yang
9040e6dfa8 i386, acpi: check acpi_memory_hotplug capacity in pre_plug
Currently we do device realization like below:

   hotplug_handler_pre_plug()
   dc->realize()
   hotplug_handler_plug()

Before we do device realization and plug, we should allocate necessary
resources and check if memory-hotplug-support property is enabled.

At the piix4 and ich9, the memory-hotplug-support property is checked at
plug stage. This means that device has been realized and mapped into guest
address space 'pc_dimm_plug()' by the time acpi plug handler is called,
where it might fail and crash QEMU due to reaching g_assert_not_reached()
(piix4) or error_abort (ich9).

Fix it by checking if memory hotplug is enabled at pre_plug stage
where we can gracefully abort hotplug request.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
CC: Igor Mammedov <imammedo@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>

Message-Id: <20190301033548.6691-1-richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12 22:31:21 -04:00
Yi Sun
4a4f219e8a intel_iommu: add scalable-mode option to make scalable mode work
This patch adds an option to provide flexibility for user to expose
Scalable Mode to guest. User could expose Scalable Mode to guest by
the config as below:

"-device intel-iommu,caching-mode=on,scalable-mode=on"

The Linux iommu driver has supported scalable mode. Please refer below
patch set:

    https://www.spinics.net/lists/kernel/msg2985279.html

Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Message-Id: <1551753295-30167-4-git-send-email-yi.y.sun@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12 22:31:21 -04:00
Liu, Yi L
c0c1d35184 intel_iommu: add 256 bits qi_desc support
Per Intel(R) VT-d 3.0, the qi_desc is 256 bits in Scalable
Mode. This patch adds emulation of 256bits qi_desc.

Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
[Yi Sun is co-developer to rebase and refine the patch.]
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1551753295-30167-3-git-send-email-yi.y.sun@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12 22:31:21 -04:00
Liu, Yi L
fb43cf739e intel_iommu: scalable mode emulation
Intel(R) VT-d 3.0 spec introduces scalable mode address translation to
replace extended context mode. This patch extends current emulator to
support Scalable Mode which includes root table, context table and new
pasid table format change. Now intel_iommu emulates both legacy mode
and scalable mode (with legacy-equivalent capability set).

The key points are below:
1. Extend root table operations to support both legacy mode and scalable
   mode.
2. Extend context table operations to support both legacy mode and
   scalable mode.
3. Add pasid tabled operations to support scalable mode.

Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
[Yi Sun is co-developer to contribute much to refine the whole commit.]
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Message-Id: <1551753295-30167-2-git-send-email-yi.y.sun@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2019-03-12 22:31:21 -04:00
Peter Maydell
2cb73afa6a Machine queue, 2019-03-11
* memfd fixes (Ilya Maximets)
 * Move nvdimms state into struct MachineState (Eric Auger)
 * hostmem-file: reject invalid pmem file sizes (Stefan Hajnoczi)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJchwQFAAoJECgHk2+YTcWmhkMP/iyHjvM7eTXcbs+5xidkQpX8
 mc9ElHmX/W2ZK1TUeopz2hUuOG12qkt3G4bOKEKgD07h/O5J7HPXSRvT1TU7UbA/
 ZkNQiF/TpuyB8JtxIgbYtgh4ZDFIGFy5o/phjCEuejyHMxZXVL8PNKCm9ZUPKgfG
 XYH1Q7Y+uHH7qQDhLRPdfs5/v8hOKdmHK/SuUn/dq2CqA4GoNjnC9IfxnuvIpDU6
 F2Hj2YhPC35zFgR3bIh2Fqz4qv37u50a1L4VPKaCQpPY5YNGj6jPaOVPQbMrviFI
 1/yaNr5RGdNrS7aQLcDKKVeclSuFHC7x3uo27JF1RbP8p4tAQi0M89E/RLyBV5lY
 Y7a9fInmJbxJQifgct6dv8yzTiNoniX5yph81RMXk0CzV74sP+yeKkwkIK2dWAsn
 2zsM6qCHFvIv3F7iIy+ONl6TJ/RALvyP4F3Vhd3lT2Y+nwnQOvUdrX6eL4yeYGfZ
 4OPCEHIn+xhb3ApYbG+4OrDBYZrPVpr6yYcqc8Ob9paeR08DgaghDX3E23bASwSl
 e9Cz19nvnIse/zHIAYoWhPFMfSTkWgREzCs+VA07bqPCb1/PNHBQmxv2mvdpB8Rw
 r/FjZyptCNyXRSfU28HEImAA7dsB9VtZAVK9oVRXaIOk2G6W5bFfAmQmAPETBRaA
 K9ZExT9oQhQdjKIaya0l
 =6nAH
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue, 2019-03-11

* memfd fixes (Ilya Maximets)
* Move nvdimms state into struct MachineState (Eric Auger)
* hostmem-file: reject invalid pmem file sizes (Stefan Hajnoczi)

# gpg: Signature made Tue 12 Mar 2019 00:57:41 GMT
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
  memfd: improve error messages
  memfd: set up correct errno if not supported
  memfd: always check for MFD_CLOEXEC
  hostmem-memfd: disable for systems without sealing support
  machine: Move nvdimms state into struct MachineState
  nvdimm: Rename AcpiNVDIMMState into NVDIMMState
  hostmem-file: reject invalid pmem file sizes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-12 15:25:46 +00:00
Markus Armbruster
ebc29e1bea pc: Support firmware configuration with -blockdev
The PC machines put firmware in ROM by default.  To get it put into
flash memory (required by OVMF), you have to use -drive
if=pflash,unit=0,... and optionally -drive if=pflash,unit=1,...

Why two -drive?  This permits setting up one part of the flash memory
read-only, and the other part read/write.  It also makes upgrading
firmware on the host easier.  Below the hood, it creates two separate
flash devices, because we were too lazy to improve our flash device
models to support sector protection.

The problem at hand is to do the same with -blockdev somehow, as one
more step towards deprecating -drive.

Mapping -drive if=none,... to -blockdev is a solved problem.  With
if=T other than if=none, -drive additionally configures a block device
frontend.  For non-onboard devices, that part maps to -device.  Also a
solved problem.  For onboard devices such as PC flash memory, we have
an unsolved problem.

This is actually an instance of a wider problem: our general device
configuration interface doesn't cover onboard devices.  Instead, we have
a zoo of ad hoc interfaces that are much more limited.  One of them is
-drive, which we'd rather deprecate, but can't until we have suitable
replacements for all its uses.

Sadly, I can't attack the wider problem today.  So back to the narrow
problem.

My first idea was to reduce it to its solved buddy by using pluggable
instead of onboard devices for the flash memory.  Workable, but it
requires some extra smarts in firmware descriptors and libvirt.  Paolo
had an idea that is simpler for libvirt: keep the devices onboard, and
add machine properties for their block backends.

The implementation is less than straightforward, I'm afraid.

First, block backend properties are *qdev* properties.  Machines can't
have those, as they're not devices.  I could duplicate these qdev
properties as QOM properties, but I hate that.

More seriously, the properties do not belong to the machine, they
belong to the onboard flash devices.  Adding them to the machine would
then require bad magic to somehow transfer them to the flash devices.
Fortunately, QOM provides the means to handle exactly this case: add
alias properties to the machine that forward to the onboard devices'
properties.

Properties need to be created in .instance_init() methods.  For PC
machines, that's pc_machine_initfn().  To make alias properties work,
we need to create the onboard flash devices there, too.  Requires
several bug fixes, in the previous commits.  We also have to realize
the devices.  More on that below.

If the user sets pflash0, firmware resides in flash memory.
pc_system_firmware_init() maps and realizes the flash devices.

Else, firmware resides in ROM.  The onboard flash devices aren't used
then.  pc_system_firmware_init() destroys them unrealized, along with
the alias properties.

The existing code to pick up drives defined with -drive if=pflash is
replaced by code to desugar into the machine properties.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <87ftrtux81.fsf@dusky.pond.sub.org>
2019-03-11 22:54:26 +01:00
Philippe Mathieu-Daudé
5e640a9e78 pc_sysfw: Pass PCMachineState to pc_system_firmware_init()
pc_system_firmware_init() parameter @isapc_ram_fw is PCMachineState
member pci_enabled negated.  The next commit will need more of
PCMachineState.  To prepare for that, pass a PCMachineState *, and
drop the now redundant parameter @isapc_ram_fw.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190308131445.17502-11-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-11 22:53:44 +01:00
Philippe Mathieu-Daudé
d6edbe91b9 pc_sysfw: Remove unused PcSysFwDevice
This structure is not used since commit 6dd2a5c98a.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190308131445.17502-10-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-11 22:53:44 +01:00
Markus Armbruster
ce14710f4f pflash: Clean up after commit 368a354f02, part 2
Our pflash devices are simplistically modelled has having
"num-blocks" sectors of equal size "sector-length".  Real hardware
commonly has sectors of different sizes.  How our "sector-length"
property is related to the physical device's multiple sector sizes
is unclear.

Helper functions pflash_cfi01_register() and pflash_cfi02_register()
create a pflash device, set properties including "sector-length" and
"num-blocks", and realize.  They take parameters @size, @sector_len
and @nb_blocs.

QOMification left parameter @size unused.  Obviously, @size should
match @sector_len and @nb_blocs, i.e. size == sector_len * nb_blocs.
All callers satisfy this.

Remove @nb_blocs and compute it from @size and @sector_len.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190308094610.21210-16-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-11 22:53:44 +01:00
Markus Armbruster
940d5b132f pflash: Clean up after commit 368a354f02, part 1
QOMification left parameter @qdev unused in pflash_cfi01_register()
and pflash_cfi02_register().  All callers pass NULL.  Remove.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190308094610.21210-15-armbru@redhat.com>
2019-03-11 22:53:44 +01:00
Markus Armbruster
1643406520 pflash: Rename pflash_t to PFlashCFI01, PFlashCFI02
flash.h's incomplete struct pflash_t is completed both in
pflash_cfi01.c and in pflash_cfi02.c.  The complete types are
incompatible.  This can hide type errors, such as passing a pflash_t
created with pflash_cfi02_register() to pflash_cfi01_get_memory().

Furthermore, POSIX reserves typedef names ending with _t.

Rename the two structs to PFlashCFI01 and PFlashCFI02.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190308094610.21210-2-armbru@redhat.com>
2019-03-11 22:53:44 +01:00
David Kiarie
c8350ebd67 update copyright notice
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Message-Id: <20190304151827.1813-2-davidkiarie4@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-11 16:33:49 +01:00
Luwei Kang
f24c3a79a4 i386: extended the cpuid_level when Intel PT is enabled
Intel Processor Trace required CPUID[0x14] but the cpuid_level
have no change when create a kvm guest with
e.g. "-cpu qemu64,+intel-pt".

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1548805979-12321-1-git-send-email-luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-11 16:33:49 +01:00
Stefano Garzarella
5dc8ab361a hw/i386/pc: run the multiboot loader before the PVH loader
Some multiboot images could be in the ELF format. In the current
implementation QEMU fails because we try to load these images
as a PVH image.

In order to fix this issue, we should try multiboot first (we
already check the multiboot magic header before to load it).
If it is not a multiboot image, we can try the PVH loader.

Fixes: ab969087da ("pvh: Boot uncompressed kernel using direct boot ABI", 2019-01-15)
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190214180216.246707-1-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-11 16:33:49 +01:00
Eric Auger
f6a0d06ba7 machine: Move nvdimms state into struct MachineState
As NVDIMM support is looming for ARM and SPAPR, let's
move the acpi_nvdimm_state to the generic machine struct
instead of duplicating the same code in several machines.
It is also renamed into nvdimms_state and becomes a pointer.

nvdimm and nvdimm-persistence become generic machine options.
They become guarded by a nvdimm_supported machine class member.
We also add a description for those options.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190308182053.5487-3-eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-11 10:44:25 -03:00
Eric Auger
c1404bde9c nvdimm: Rename AcpiNVDIMMState into NVDIMMState
As we intend to migrate the acpi_nvdimm_state into
the base machine with a new dimms_state name, let's
also rename the datatype.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190308182053.5487-2-eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-11 10:44:21 -03:00
Yang Zhong
58accbc508 i386-softmmu.mak: remove all CONFIG_* except boards definitions
%-softmmu.mak only keep boards definitions in Kconfig mode.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-43-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Yang Zhong
ccf222a816 hyperv: express dependencies with kconfig
remove default-configs/hyperv.mak and make dependencies
with Kconfig.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-41-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
1550b0e6bf i2c: express dependencies with Kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-38-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
02017ee385 i386: express dependencies with Kconfig
This way, the default-configs file only need to specify the boards
and any optional devices.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-37-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
a7e2315907 isa: express dependencies with kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
e0e312f352 build: switch to Kconfig
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig.  One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script.  This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
82f5181777 kconfig: introduce kconfig files
The Kconfig files were generated mostly with this script:

  for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
    set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
    shift
    if test $# = 1; then
      cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
    bool

EOF
      git add $(dirname $1)/Kconfig
    else
      echo $i $*
    fi
  done
  sed -i '$d' hw/*/Kconfig
  for i in hw/*; do
    if test -d $i && ! test -f $i/Kconfig; then
      touch $i/Kconfig
      git add $i/Kconfig
    fi
  done

Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.

Kconfig.host and hw/Kconfig were created manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
David Hildenbrand
07578b0ad6 qdev: Let the hotplug_handler_unplug() caller delete the device
When unplugging a device, at one point the device will be destroyed
via object_unparent(). This will, one the one hand, unrealize the
removed device hierarchy, and on the other hand, destroy/free the
device hierarchy.

When chaining hotplug handlers, we want to overwrite a bus hotplug
handler by the machine hotplug handler, to be able to perform
some part of the plug/unplug and to forward the calls to the bus hotplug
handler.

For now, the bus hotplug handler would trigger an object_unparent(), not
allowing us to perform some unplug action on a device after we forwarded
the call to the bus hotplug handler. The device would be gone at that
point.

machine_unplug_handler(dev)
    /* eventually do unplug stuff */
    bus_unplug_handler(dev)
    /* dev is gone, we can't do more unplug stuff */

So move the object_unparent() to the original caller of the unplug. For
now, keep the unrealize() at the original places of the
object_unparent(). For implicitly chained hotplug handlers (e.g. pc
code calling acpi hotplug handlers), the object_unparent() has to be
done by the outermost caller. So when calling hotplug_handler_unplug()
from inside an unplug handler, nothing is to be done.

hotplug_handler_unplug(dev) -> calls machine_unplug_handler()
    machine_unplug_handler(dev) {
        /* eventually do unplug stuff */
        bus_unplug_handler(dev) -> calls unrealize(dev)
        /* we can do more unplug stuff but device already unrealized */
    }
object_unparent(dev)

In the long run, every unplug action should be factored out of the
unrealize() function into the unplug handler (especially for PCI). Then
we can get rid of the additonal unrealize() calls and object_unparent()
will properly unrealize the device hierarchy after the device has been
unplugged.

hotplug_handler_unplug(dev) -> calls machine_unplug_handler()
    machine_unplug_handler(dev) {
        /* eventually do unplug stuff */
        bus_unplug_handler(dev) -> only unplugs, does not unrealize
        /* we can do more unplug stuff */
    }
object_unparent(dev) -> will unrealize

The original approach was suggested by Igor Mammedov for the PCI
part, but I extended it to all hotplug handlers. I consider this one
step into the right direction.

To summarize:
- object_unparent() on synchronous unplugs is done by common code
-- "Caller of hotplug_handler_unplug"
- object_unparent() on asynchronous unplugs ("unplug requests") has to
  be done manually
-- "Caller of hotplug_handler_unplug"

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190228122849.4296-2-david@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06 11:51:08 -03:00
Wei Yang
49e5ef07d7 hw/i386/pc.c: remove unused function pc_acpi_init()
Function pc_acpi_init() is not used anymore.

Remove the definition and declaration.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190214084939.20640-2-richardw.yang@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06 10:22:03 +01:00
Corey Minyard
7fccf2a068 boards.h: Ignore migration for SMBus devices on older machines
Migration capability is being added for pm_smbus and SMBus devices.
This change will allow backwards compatibility to be kept when
migrating back to an old qemu version.  Add a bool to the machine
class tho keep smbus migration from happening.  Future changes
will use this.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-02-27 21:06:08 -06:00
Corey Minyard
93198b6cad i2c: Split smbus into parts
smbus.c and smbus.h had device side code, master side code, and
smbus.h has some smbus_eeprom.c definitions.  Split them into
separate files.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27 21:06:08 -06:00
Peter Maydell
3e29da9fd8 * cpu-exec fixes (Emilio, Laurent)
* TCG bugfix in queue.h (Paolo)
 * high address load for linuxboot (Zhijian)
 * PVH support (Liam, Stefano)
 * misc i386 changes (Paolo, Robert, Doug)
 * configure tweak for openpty (Thomas)
 * elf2dmp port to Windows (Viktor)
 * initial improvements to Makefile infrastructure (Yang + GSoC 2013)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJcWckyAAoJEL/70l94x66DCU0H/03tjXBR5iVGjBIroSCq7tti
 6+BWvVbDEHQMS9i3BQc6rNgc4ZAyfJ4iO9wQkpx43PltPIG9e6ZiJaCB4F3jmN5f
 3i2LKBXJGFmGNwz8cAq2qpSIBrx7iPeCzbO/BylpwsILfNycb5K35oS7Qr7ezUcj
 xLM5VfW+3TF0SqI0utNHNAlO/xeBOKh+N1Iettqn+L5MAgI9rmnfDkaD3Pmkbw1H
 Iw8yzEypU4Qsqy4zUyb+dppkwSLELOZ24uJVtYnV+HeTwejXD66FMhvFssw0P7kF
 VBK8L6SttYfe9ltUAsXmlLSsnYThCiV0AMclHy8U3mvA47KbBPxTR7u47UDAZSE=
 =2trt
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* cpu-exec fixes (Emilio, Laurent)
* TCG bugfix in queue.h (Paolo)
* high address load for linuxboot (Zhijian)
* PVH support (Liam, Stefano)
* misc i386 changes (Paolo, Robert, Doug)
* configure tweak for openpty (Thomas)
* elf2dmp port to Windows (Viktor)
* initial improvements to Makefile infrastructure (Yang + GSoC 2013)

# gpg: Signature made Tue 05 Feb 2019 17:34:42 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (76 commits)
  queue: fix QTAILQ_FOREACH_REVERSE_SAFE
  scsi-generic: Convert from DPRINTF() macro to trace events
  scsi-disk: Convert from DPRINTF() macro to trace events
  pc: Use hotplug_handler_(plug|unplug|unplug_request)
  i386: hvf: Fix smp boot hangs
  hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI
  hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller
  hw/tricore/Makefile.objs: Create CONFIG_* for tricore
  hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc
  hw/moxie/Makefile.objs: Conditionally build moxie
  hw/hppa/Makefile.objs: Create CONFIG_* for hppa
  hw/cris/Makefile.objs: Create CONFIG_* for cris
  hw/alpha/Makefile.objs: Create CONFIG_* for alpha
  hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64
  hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards
  hw/nios2/Makefile.objs: Conditionally build nios2
  hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally
  hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst
  hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created
  hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	qemu-deprecated.texi
2019-02-05 19:39:22 +00:00
Wei Yang
009180bd49 i386, acpi: cleanup build_facs by removing second unused argument
The second argument of build_facs() is not used, just remove it.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-05 10:58:33 -05:00
Stefan Berger
24cf5413aa acpi: Make TPM 2.0 with TIS available as MSFT0101
This patch makes the a TPM 2.0 with TIS interface available under the
HID 'MSF0101'. This is supported by Linux and also Windows now
recognizes the TPM 2.0 with TIS interface. Leave the TPM 1.2 as before.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-02-05 10:58:33 -05:00
Peter Xu
d7bb469afa intel_iommu: reset intr_enabled when system reset
This is found when I was debugging another problem.  Until now no bug
is reported with this but we'd better reset the IR status correctly
after a system reset.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-05 10:58:33 -05:00
Peter Xu
2a078b1080 intel_iommu: fix operator in vtd_switch_address_space
When calculating use_iommu, we wanted to first detect whether DMAR is
enabled, then check whether PT is enabled if DMAR is enabled.  However
in the current code we used "&" rather than "&&" so the ordering
requirement is lost (instead it'll be an "AND" operation).  This could
introduce errors dumped in QEMU console when rebooting a guest with
both assigned device and vIOMMU, like:

  qemu-system-x86_64: vtd_dev_to_context_entry: invalid root entry:
  rsvd=0xf000ff53f000e2c3, val=0xf000ff53f000ff53 (reserved nonzero)

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-05 10:58:33 -05:00
David Hildenbrand
473ac56706 pc: Use hotplug_handler_(plug|unplug|unplug_request)
Let's avoid manually looking up the hotplug handler class. Use the
existing wrappers instead.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181212095707.19358-1-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:21 +01:00
Paolo Bonzini
80500ce637 hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards
CONFIG_PIIX and CONFIG_Q35 created for the pc board object files. These
are enabled automatically at default-configs/i386-softmmu.mak and
default-configs/x86_64-softmmu.mak

Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-7-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:19 +01:00
Li Zhijian
aab50e5344 i386: allow to load initrd below 4 GB for recent linux
Since linux commit: cf8fa920cb42 ("i386: handle an initrd in highmem (version 2)")
linux has supported initrd up to 4 GB, but the header field
ramdisk_max is still set to 2 GB to avoid "possible bootloader bugs".

When use '-kernel vmlinux -initrd initrd.cgz' to launch a VM,
the firmware(it could be linuxboot_dma.bin) helps to read initrd
contents into guest memory(below ramdisk_max) and jump to kernel.
that's similar with what bootloader does, like grub.

In addition, initrd_max is uint32_t simply because QEMU doesn't support
the 64-bit boot protocol (specifically the ext_ramdisk_image field).

Therefore here just limit initrd_max to UINT32_MAX simply as well to
allow initrd to be loaded below 4 GB.

NOTE: it's possible that linux protocol within [0x208, 0x20c]
supports up to 4 GB initrd as well.

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>

Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:18 +01:00
Li Zhijian
06e0259a7c i386: import & use bootparam.h
it's from v4.20-rc5.

CC: Stefano Garzarella <sgarzare@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:18 +01:00
Stefano Garzarella
fda672b50e hw/i386/pc: enable PVH only for machine type >= 4.0
In order to avoid migration issues, we enable PVH only for
machine type >= 4.0

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:17 +01:00
Stefano Garzarella
1fb0d70990 hw/i386/pc: use PVH option rom
Use pvh.bin option rom when we are booting an uncompressed
kernel using the x86/HVM direct boot ABI.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Based-on: <1547554687-12687-1-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:17 +01:00
Stefano Garzarella
c5bf7847b7 pvh: load initrd and expose it through fw_cfg
When initrd is specified, load and expose it to the guest firmware
through fw_cfg. The firmware will fill the hvm_start_info for the
kernel.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Based-on: <1545422632-24444-5-git-send-email-liam.merwick@oracle.com>
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:16 +01:00
Liam Merwick
ab969087da pvh: Boot uncompressed kernel using direct boot ABI
These changes (along with corresponding Linux kernel and qboot changes)
enable a guest to be booted using the x86/HVM direct boot ABI.

This commit adds a load_elfboot() routine to pass the size and
location of the kernel entry point to qboot (which will fill in
the start_info struct information needed to to boot the guest).
Having loaded the ELF binary, load_linux() will run qboot
which continues the boot.

The address for the kernel entry point is read from an ELF Note
in the uncompressed kernel binary by a helper routine passed
to load_elf().

Co-developed-by: George Kennedy <George.Kennedy@oracle.com>
Signed-off-by: George Kennedy <George.Kennedy@oracle.com>
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:16 +01:00
Liam Merwick
4366e1db16 elf: Add optional function ptr to load_elf() to parse ELF notes
This patch adds an optional function pointer, 'elf_note_fn', to
load_elf() which causes load_elf() to additionally parse any
ELF program headers of type PT_NOTE and check to see if the ELF
Note is of the type specified by the 'translate_opaque' arg.
If a matching ELF Note is found then the specfied function pointer
is called to process the ELF note.

Passing a NULL function pointer results in ELF Notes being skipped.

The first consumer of this functionality is the PVHboot support
which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while
loading the uncompressed kernel binary in order to discover the
boot entry address for the x86/HVM direct boot ABI.

Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:16 +01:00
Peter Maydell
e8977901b7 - add device category (edu, i8042, sd memory card)
- code clean-up
 - LGPL information clean-up
 - fix typo (acpi)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcUaTuAAoJEPMMOL0/L748/ZMP/AwJM0P7AjFSuPxC5ETNK2Nn
 kJSMOMhAYs4oZppwQ25tphHNFd7xEzQd1JBS5aT4svp5qN0kzoUoPY6IpxvfXueW
 aFmXJPgCZvWPvD8xebHYPiH1wr0ITeRKDjZBV+YykCwIOiigg5RraMslon+Djf2f
 WNB7L/abhb4eTf5vNvS7cpCLOSXbslYYtj4Z5WcSARRAFlvBzHczooiYMuovMhtP
 zCOhG7tW9scqoEJyIW2Bxmw4QqHAuOtrDnqN3DHseM1Eh4PoJCNLVf4lTU8qWhF4
 W8IGysjQQot2V2JIkD9XkNcfGlQNniwNj/vYhpKCDLACE65ztZ42DV7j+oe2SDB2
 ljqTc2Vi4pmqEuIGcT3MykBKdsjdLOS3KBP3S6fgMV7/R347xeRf85bGcZQb/AnS
 rsL5MLA4nkd0xdztpuvHcqJdxhk+SbwsY8Zlj4agSELhFuIuEKz4VLd/WrxQvAhp
 yimX2+m7dHvIsHWpRduZ8I5nR2U0O+sxmIhPbaQNCcHTU/JZjtZEKxU0kpCHkBtd
 AdMVXf8NMGe8NecY8n9Y80Veencpq+nCthGtRRJwWOptlXXYdR5aYHaX6IlJaVFV
 jmVZITn1HxddPsVqGW0ZAJip78xVi8eYHiMvQO4+dfECLAH6m7TyLRKh8MyIyCHD
 VJ6roxeKSgosPaw1tzc2
 =1OOM
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

- add device category (edu, i8042, sd memory card)
- code clean-up
- LGPL information clean-up
- fix typo (acpi)

# gpg: Signature made Wed 30 Jan 2019 13:21:50 GMT
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  virtio-blk: remove duplicate definition of VirtIOBlock *s pointer
  hw/block: clean up stale xen_disk trace entries
  target/m68k: Fix LGPL information in the file headers
  target/s390x: Fix LGPL version in the file header comments
  tcg: Fix LGPL version number
  target/tricore: Fix LGPL version number
  target/openrisc: Fix LGPL version number
  COPYING.LIB: Synchronize the LGPL 2.1 with the version from gnu.org
  Don't talk about the LGPL if the file is licensed under the GPL
  hw: sd: set category of the sd memory card
  hw: input: set category of the i8042 device
  typo: apci->acpi
  hw: edu: set category of the edu device

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-31 15:40:39 +00:00
Dr. David Alan Gilbert
89cb0c0403 typo: apci->acpi
apci_1_compatible should be acpi_1_compatible.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190125094047.22276-1-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-30 10:16:58 +01:00
Vitaly Kuznetsov
9fe8b7be17 i386: Enable NPT and NRIPSAVE for AMD CPUs
Modern AMD CPUs support NPT and NRIPSAVE features and KVM exposes these
when present. NRIPSAVE apeared somewhere in Opteron_G3 lifetime (e.g.
QuadCore AMD Opteron 2378 has is but QuadCore AMD Opteron HE 2344 doesn't),
NPT was introduced a bit earlier.

Add the FEAT_SVM leaf to Opteron_G4/G5 and EPYC/EPYC-IBPB cpu models.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190121155051.5628-1-vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-28 15:51:54 -02:00
Tao Xu
b0a1980384 i386: Update stepping of Cascadelake-Server
Update the stepping from 5 to 6, in order that
the Cascadelake-Server CPU model can support AVX512VNNI
and MSR based features exposed by ARCH_CAPABILITIES.

Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20181227024304.12182-2-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-28 15:51:54 -02:00
Wei Yang
285816d76f hw/i386/pc.c: fix one typo in function name
Rename pc_get_hotpug_handler to pc_get_hotplug_handler.

No functional change.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190124073626.20534-1-richardw.yang@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-24 13:34:20 +01:00
Stefan Berger
ac6dd31e3f acpi: build TPM Physical Presence interface
The TPM Physical Presence interface consists of an ACPI part, a shared
memory part, and code in the firmware. Users can send messages to the
firmware by writing a code into the shared memory through invoking the
ACPI code. When a reboot happens, the firmware looks for the code and
acts on it by sending sequences of commands to the TPM.

This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't
assume that SMIs are necessary to use. It uses a similar datastructure for
the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use
of it. I extended the shared memory data structure with an array of 256
bytes, one for each code that could be implemented. The array contains
flags describing the individual codes. This decouples the ACPI implementation
from the firmware implementation.

The underlying TCG specification is accessible from the following page.

https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/

This patch implements version 1.30.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André - ACPI code improvements and windows fixes ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-17 21:10:57 -05:00
Stefan Berger
0fe2466903 acpi: expose TPM/PPI configuration parameters to firmware via fw_cfg
To avoid having to hard code the base address of the PPI virtual
memory device we introduce a fw_cfg file etc/tpm/config that holds the
base address of the PPI device, the version of the PPI interface and
the version of the attached TPM.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André: renamed to etc/tpm/config, made it static, document it ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-17 21:10:57 -05:00
Thomas Huth
5a0e75f0a9 hw/misc/ivshmem: Remove deprecated "ivshmem" legacy device
It's been marked as deprecated in QEMU v2.6.0 already, so really nobody
should use the legacy "ivshmem" device anymore (but use ivshmem-plain or
ivshmem-doorbell instead). Time to remove the deprecated device now.

Belatedly also update a mention of the deprecated "ivshmem" in the file
docs/specs/ivshmem-spec.txt to "ivshmem-doorbell". Missed in commit
5400c02b90 ("ivshmem: Split ivshmem-plain, ivshmem-doorbell off ivshmem").

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-14 19:31:04 -05:00
Peter Maydell
89bd861c2b x86 queue, 2019-01-14
* Reenable RDTSCP support on Opteron_G[345] CPU models CPU models
   (Borislav Petkov)
 * host-phys-bits-limit option for better control of 5-level EPT
   (Eduardo Habkost)
 * Disable MPX support on named CPU models (Paolo Bonzini)
 * expose HV_CPUID_ENLIGHTMENT_INFO.EAX and HV_CPUID_NESTED_FEATURES.EAX
   as feature words (Vitaly Kuznetsov)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJcPJ3TAAoJECgHk2+YTcWmNlkP/1zlFjCo1em9RLGxeZrkzFna
 ugH/tZxqWQb3MfzNSsj51DGy2NB2WT2BaCtJKWjhzdDTLqveFaFCUKfhGyYETIHU
 OgNbUCjxBkv3vvWJ8c8w7pcc/atPZL7OCqIEbgJ/SwcSl0hF3bJrRJYYuA5dYeWx
 KewMRinFy3VEa+qlTGSAvpyp5C6XxIOPI6COQvu/CVlLmdlj+gURbaTtWHpZ3USU
 tTxSJLjbAPUlULAk57Wh2r5LpEgGzuBts9VosiQWzREz03rqYTk6JPjyxQKEasaz
 2lhjQWriRwcPNpgSSRfdnwMxlKisgLwWf/A9StoNjHWlzcTn6HR7HFP5O6YgKcEV
 EkAhu9UGeltqOHGJPReO6y5J8VHHj7FJZE5PfDE3mYKgmEsn+1O7gOr9amy5PCT9
 a7zozGHWOqJMb05XbB4CxENmgoNRKE9rMhwe5Jjc9dxrHOtgcXoUO9YNYvPE6ZyC
 6GxKdn0rAzZldwuFj8orZZeYLUlfoV0frNWfNKi8FdBad7z5HalVtB7jjaWRw6eI
 mOabTZPV6aaiyHgiR/YGBd3h9kWex9zJWxVDZMoRRFBNFSs8HFKzbVrwv/g6e83B
 2ZUrQ4MLI5cgU8zZ2XdTPx7SVV+Nxr6wWXtx55Sn9LB8IGMdEqZ06W+iZfZgF2PV
 miQR5IsbOapmIBssV1Mo
 =S08V
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging

x86 queue, 2019-01-14

* Reenable RDTSCP support on Opteron_G[345] CPU models CPU models
  (Borislav Petkov)
* host-phys-bits-limit option for better control of 5-level EPT
  (Eduardo Habkost)
* Disable MPX support on named CPU models (Paolo Bonzini)
* expose HV_CPUID_ENLIGHTMENT_INFO.EAX and HV_CPUID_NESTED_FEATURES.EAX
  as feature words (Vitaly Kuznetsov)

# gpg: Signature made Mon 14 Jan 2019 14:33:55 GMT
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-next-pull-request:
  i386/kvm: add a comment explaining why .feat_names are commented out for Hyper-V feature bits
  x86: host-phys-bits-limit option
  target/i386: Disable MPX support on named CPU models
  target-i386: Reenable RDTSCP support on Opteron_G[345] CPU models CPU models
  i386/kvm: expose HV_CPUID_ENLIGHTMENT_INFO.EAX and HV_CPUID_NESTED_FEATURES.EAX as feature words

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-14 17:35:00 +00:00
Paolo Bonzini
ecb85fe48c target/i386: Disable MPX support on named CPU models
MPX support is being phased out by Intel; GCC has dropped it, Linux
is also going to do that.  Even though KVM will have special code
to support MPX after the kernel proper stops enabling it in XCR0,
we probably also want to deprecate that in a few years.  As a start,
do not enable it by default for any named CPU model starting with
the 4.0 machine types; this include Skylake, Icelake and Cascadelake.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181220121100.21554-1-pbonzini@redhat.com>
Reviewed-by:   Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-14 12:23:36 -02:00
Borislav Petkov
483c6ad426 target-i386: Reenable RDTSCP support on Opteron_G[345] CPU models CPU models
The missing functionality was added ~3 years ago with the Linux commit

  46896c73c1a4 ("KVM: svm: add support for RDTSCP")

so reenable RDTSCP support on those CPU models.

Opteron_G2 - being family 15, model 6, doesn't have RDTSCP support
(the real hardware doesn't have it. K8 got RDTSCP support with the NPT
models, i.e., models >= 0x40).

Document the host's minimum required kernel version, while at it.

Signed-off-by: Borislav Petkov <bp@suse.de>
Message-ID: <20181212200803.GG6653@zn.tnic>
[ehabkost: moved compat properties code to pc.c]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-14 12:23:36 -02:00
Paul Durrant
108f7bba15 xen: introduce new 'XenBus' and 'XenDevice' object hierarchy
This patch adds the basic boilerplate for a 'XenBus' object that will act
as a parent to 'XenDevice' PV backends.
A new 'XenBridge' object is also added to connect XenBus to the system bus.

The XenBus object is instantiated by a new xen_bus_init() function called
from the same sites as the legacy xen_be_init() function.

Subsequent patches will flesh-out the functionality of these objects.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14 13:45:40 +00:00
Paul Durrant
2d0ed5e642 xen: re-name XenDevice to XenLegacyDevice...
...and xen_backend.h to xen-legacy-backend.h

Rather than attempting to convert the existing backend infrastructure to
be QOM compliant (which would be hard to do in an incremental fashion),
subsequent patches will introduce a completely new framework for Xen PV
backends. Hence it is necessary to re-name parts of existing code to avoid
name clashes. The re-named 'legacy' infrastructure will be removed once all
backends have been ported to the new framework.

This patch is purely cosmetic. No functional change.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14 13:45:40 +00:00
Peter Maydell
15bede5541 * HAX support for Linux hosts (Alejandro)
* esp bugfixes (Guenter)
 * Windows build cleanup (Marc-André)
 * checkpatch logic improvements (Paolo)
 * coalesced range bugfix (Paolo)
 * switch testsuite to TAP (Paolo)
 * QTAILQ rewrite (Paolo)
 * block/iscsi.c cancellation fixes (Stefan)
 * improve selection of the default accelerator (Thomas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJcOKyMAAoJEL/70l94x66DxKEH/1ho2Xl8ezxCecA6q3HqTgMT
 NJ/ntdqQwVwekKOWzsywnM3/LkEDLH55MxbTeQ8M/Vb1seS8eROz24/gPTzvFrfR
 n/d11rDV1EJfWe0H7nGLLFiRv0MSjxLpG9c3dlOKWhwOYHm25tr48PsdfVFP9Slz
 BK3rwrMeDgArfptHAIsAXt2h1S0EzrG9pMwGDpErCDzziXxBhUESE0Iqfw8LsH1K
 VjMn6rn7Ts1XKlxxwsm+BzHlTJghbj3tWPIfk+6uK2isP4iM3gFCoav3SG9XVXof
 V9+vFyMxdtZKT/0HvajhUS4/1S/uGBNNchZRnCxXlpbueWc5ROtvarhM6Hb0eck=
 =i8E5
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* HAX support for Linux hosts (Alejandro)
* esp bugfixes (Guenter)
* Windows build cleanup (Marc-André)
* checkpatch logic improvements (Paolo)
* coalesced range bugfix (Paolo)
* switch testsuite to TAP (Paolo)
* QTAILQ rewrite (Paolo)
* block/iscsi.c cancellation fixes (Stefan)
* improve selection of the default accelerator (Thomas)

# gpg: Signature made Fri 11 Jan 2019 14:47:40 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (34 commits)
  avoid TABs in files that only contain a few
  remove space-tab sequences
  scripts: add script to convert multiline comments into 4-line format
  hw/watchdog/wdt_i6300esb: remove a unnecessary comment
  checkpatch: warn about qemu/queue.h head structs that are not typedef-ed
  qemu/queue.h: simplify reverse access to QTAILQ
  qemu/queue.h: reimplement QTAILQ without pointer-to-pointers
  qemu/queue.h: remove Q_TAILQ_{HEAD,ENTRY}
  qemu/queue.h: typedef QTAILQ heads
  qemu/queue.h: leave head structs anonymous unless necessary
  vfio: make vfio_address_spaces static
  qemu/queue.h: do not access tqe_prev directly
  test: replace gtester with a TAP driver
  test: execute g_test_run when tests are skipped
  qga: drop < Vista compatibility
  build-sys: build with Vista API by default
  build-sys: move windows defines in osdep.h header
  build-sys: don't include windows.h, osdep.h does it
  scsi: esp: Defer command completion until previous interrupts have been handled
  esp-pci: Fix status register write erase control
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-11 15:46:09 +00:00
Paolo Bonzini
7d37435bd5 avoid TABs in files that only contain a few
Most files that have TABs only contain a handful of them.  Change
them to spaces so that we don't confuse people.

disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line.  Many of them
have a majority of TABs, or were initially committed with all tabs.

    bsd-user/i386/target_syscall.h
    bsd-user/x86_64/target_syscall.h
    crypto/aes.c
    hw/audio/fmopl.c
    hw/audio/fmopl.h
    hw/block/tc58128.c
    hw/display/cirrus_vga.c
    hw/display/xenfb.c
    hw/dma/etraxfs_dma.c
    hw/intc/sh_intc.c
    hw/misc/mst_fpga.c
    hw/net/pcnet.c
    hw/sh4/sh7750.c
    hw/timer/m48t59.c
    hw/timer/sh_timer.c
    include/crypto/aes.h
    include/disas/bfd.h
    include/hw/sh4/sh.h
    libdecnumber/decNumber.c
    linux-headers/asm-generic/unistd.h
    linux-headers/linux/kvm.h
    linux-user/alpha/target_syscall.h
    linux-user/arm/nwfpe/double_cpdo.c
    linux-user/arm/nwfpe/fpa11_cpdt.c
    linux-user/arm/nwfpe/fpa11_cprt.c
    linux-user/arm/nwfpe/fpa11.h
    linux-user/flat.h
    linux-user/flatload.c
    linux-user/i386/target_syscall.h
    linux-user/ppc/target_syscall.h
    linux-user/sparc/target_syscall.h
    linux-user/syscall.c
    linux-user/syscall_defs.h
    linux-user/x86_64/target_syscall.h
    slirp/cksum.c
    slirp/if.c
    slirp/ip.h
    slirp/ip_icmp.c
    slirp/ip_icmp.h
    slirp/ip_input.c
    slirp/ip_output.c
    slirp/mbuf.c
    slirp/misc.c
    slirp/sbuf.c
    slirp/socket.c
    slirp/socket.h
    slirp/tcp_input.c
    slirp/tcpip.h
    slirp/tcp_output.c
    slirp/tcp_subr.c
    slirp/tcp_timer.c
    slirp/tftp.c
    slirp/udp.c
    slirp/udp.h
    target/cris/cpu.h
    target/cris/mmu.c
    target/cris/op_helper.c
    target/sh4/helper.c
    target/sh4/op_helper.c
    target/sh4/translate.c
    tcg/sparc/tcg-target.inc.c
    tests/tcg/cris/check_addo.c
    tests/tcg/cris/check_moveq.c
    tests/tcg/cris/check_swap.c
    tests/tcg/multiarch/test-mmap.c
    ui/vnc-enc-hextile-template.h
    ui/vnc-enc-zywrle.h
    util/envlist.c
    util/readline.c

The following have only TABs:

    bsd-user/i386/target_signal.h
    bsd-user/sparc64/target_signal.h
    bsd-user/sparc64/target_syscall.h
    bsd-user/sparc/target_signal.h
    bsd-user/sparc/target_syscall.h
    bsd-user/x86_64/target_signal.h
    crypto/desrfb.c
    hw/audio/intel-hda-defs.h
    hw/core/uboot_image.h
    hw/sh4/sh7750_regnames.c
    hw/sh4/sh7750_regs.h
    include/hw/cris/etraxfs_dma.h
    linux-user/alpha/termbits.h
    linux-user/arm/nwfpe/fpopcode.h
    linux-user/arm/nwfpe/fpsr.h
    linux-user/arm/syscall_nr.h
    linux-user/arm/target_signal.h
    linux-user/cris/target_signal.h
    linux-user/i386/target_signal.h
    linux-user/linux_loop.h
    linux-user/m68k/target_signal.h
    linux-user/microblaze/target_signal.h
    linux-user/mips64/target_signal.h
    linux-user/mips/target_signal.h
    linux-user/mips/target_syscall.h
    linux-user/mips/termbits.h
    linux-user/ppc/target_signal.h
    linux-user/sh4/target_signal.h
    linux-user/sh4/termbits.h
    linux-user/sparc64/target_syscall.h
    linux-user/sparc/target_signal.h
    linux-user/x86_64/target_signal.h
    linux-user/x86_64/termbits.h
    pc-bios/optionrom/optionrom.h
    slirp/mbuf.h
    slirp/misc.h
    slirp/sbuf.h
    slirp/tcp.h
    slirp/tcp_timer.h
    slirp/tcp_var.h
    target/i386/svm.h
    target/sparc/asi.h
    target/xtensa/core-dc232b/xtensa-modules.inc.c
    target/xtensa/core-dc233c/xtensa-modules.inc.c
    target/xtensa/core-de212/core-isa.h
    target/xtensa/core-de212/xtensa-modules.inc.c
    target/xtensa/core-fsf/xtensa-modules.inc.c
    target/xtensa/core-sample_controller/core-isa.h
    target/xtensa/core-sample_controller/xtensa-modules.inc.c
    target/xtensa/core-test_kc705_be/core-isa.h
    target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
    tests/tcg/cris/check_abs.c
    tests/tcg/cris/check_addc.c
    tests/tcg/cris/check_addcm.c
    tests/tcg/cris/check_addoq.c
    tests/tcg/cris/check_bound.c
    tests/tcg/cris/check_ftag.c
    tests/tcg/cris/check_int64.c
    tests/tcg/cris/check_lz.c
    tests/tcg/cris/check_openpf5.c
    tests/tcg/cris/check_sigalrm.c
    tests/tcg/cris/crisutils.h
    tests/tcg/cris/sys.c
    tests/tcg/i386/test-i386-ssse3.c
    ui/vgafont.h

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:56 +01:00
Paolo Bonzini
b58deb344d qemu/queue.h: leave head structs anonymous unless necessary
Most list head structs need not be given a name.  In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed.  In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct.  So clean up everything, not giving a
name except in the rare case where it is necessary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:55 +01:00
Peter Maydell
e53f7796fb Machine queue, 2019-01-10
* Simplify GlobalProperty array declarations (Eduardo Habkost)
 * Deprecate cpu-add commands (Kashyap Chamarthy)
 * range/memory-device cleanups (David Hildenbrand)
 * Fix -device scsi-hd,help regression (Marc-André Lureau)
 * Fix crash when -global generates multiple warnings (Eduardo
   Habkost)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJcN1aHAAoJECgHk2+YTcWmi20QALYlChpE/YNh/8RZvpKRRgt4
 4aj8/qOlFq+TeoKQPf6KNCrTy6awvVGWOhOZOLdGcalqNZ/l69ZmKmECU0dqTrEw
 2zo0FxD8bjqVdsBJifLFa925GbUBHFtw/Am87Qv/LO+PV0bqMMIVUyNo5hd0iMej
 AhwlaIKAJxIKlsUiZOXpc2n1siFBjciJWdNapsam+ia8b8Y5jZ5GlkfTCJ3Nve2m
 uHMTPTt6iQao3YmPZ11E2elQENV7F51wM21Ti93Eo90FRpmADzsGw+lnh4wp50Mr
 q2QvaDByxcNEfdhKWOTdjRV6pkVBUh6GZps9SJvFtSGc2vfxqPgpi+HvN6f79uIO
 QV3rbkM0dyR+xveKrBVHA7MjCNEdVdpz5GRsYHDC3kjZC/dpEN/nV5g4TKSMzd6A
 hHQi6sRBi1qiKytsRB8sTElDDJxmoE8t5X1QeW+Wws0hBKVnrlr/BY0u09ip2j4x
 qoR4QG1nrmAXHIKVwsIdn8tiPqX2iq+OPu/Tp8FHlRI/90+3jazSbderT6I/9oCd
 AqnxSGXRoPhK0l0n/57mcPeY478ENtRqdeUkUVDVFSoTG9ys8aYqYzS19CdrRExo
 QsJ1M+NGWqzCal4VxNrdbUHAQoG4b1tVnQJMiFBc9LxS/88Da7huoiXRwAQkwOCd
 Um3orC2vlv78QXTwTho6
 =LNk6
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue, 2019-01-10

* Simplify GlobalProperty array declarations (Eduardo Habkost)
* Deprecate cpu-add commands (Kashyap Chamarthy)
* range/memory-device cleanups (David Hildenbrand)
* Fix -device scsi-hd,help regression (Marc-André Lureau)
* Fix crash when -global generates multiple warnings (Eduardo
  Habkost)

# gpg: Signature made Thu 10 Jan 2019 14:28:23 GMT
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
  qom: Don't keep error value between object_property_parse() calls
  qdev: fix -device scsi-hd,help regression
  machine: Use shorter format for GlobalProperty arrays
  machine: Eliminate unnecessary stringify() usage
  spapr: Eliminate SPAPR_PCI_2_7_MMIO_WIN_SIZE macro
  memory-device: rewrite address assignment using ranges
  range: add some more functions
  Mention that QMP 'cpu-add' will be deprecated
  Update that HMP 'cpu-add' is deprecated in 4.0
  qemu-deprecated.texi: Rename the HMP section

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-11 13:35:48 +00:00
Eduardo Habkost
6c36bddf53 machine: Use shorter format for GlobalProperty arrays
Instead of verbose arrays with 4 lines for each entry, make each
entry take only one line.  This makes long arrays that couldn't
fit in the screen become short and readable.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190107193020.21744-4-ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-09 22:10:00 -02:00
Eduardo Habkost
e0985450e1 machine: Eliminate unnecessary stringify() usage
stringify() is useful when we need to use macros in compat_props
(like when we set virtio-baloon-pci.class=PCI_CLASS_MEMORY_RAM at
pc_i440fx_1_0_machine_options()), but it is pointless when we are
already providing a number literal.

Replace stringify() with string literals when appropriate.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190107193020.21744-3-ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-09 22:10:00 -02:00
Li Qiang
34bec7a8d0 ioapic: use TYPE_FOO MACRO than constant string
Make them more QOMConventional.
Cc:qemu-trivial@nongnu.org

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190105023831.66910-1-liq3ea@163.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-09 11:33:47 +01:00
Peter Maydell
147923b1a9 usb: generic sysbus ehci, bugfixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJcNMeBAAoJEEy22O7T6HE4W48QAMi3iyjY4OUDSHyYwGD80wZ5
 A9vl8RYPQQYXZANGwMhr/uHZUBpH1V55WGd5CfKJ2IrVNwi4Q1T+3rmbB+V2ROaq
 MPWjHP7aJHyderdUycaVK7PmlrSJKdAC096+azYsMmxT+A5yhwlqr33EdHDSmOYz
 CQ/Fpn1waWXxG/Q9jnVIUqT6NP25j3CxgMU3jqUa+NauseIFr/6ZFPxukjbPQ4Yu
 bpcPoc+W/iL8ijhrCru+n4XqM8hU6JDavRKWzUQ+ljn8hhhh2aIbWqlVdHP9szpz
 wo2DtdzpbFdspVnXFCf7YPDrNZsZ31+bnfJHGFjSOghNq5jnvMOx5bvqux2WiZQj
 WcgN/Ej59aQzDkIuFASkC/E2KVl30Qw2u3WT11zG1VO6aIHe1oa8FMbL/ys0Xj4Q
 XW+TRhWXxK5GlR0WEaEUXPxrK+zsJmrjSj70XH9BaWj/A12FRwLYG5VSQC0PsuAB
 IoDzc4rgDNsm1Mig58Oklu8PJAenxJH573VM27+XMMfkj5/hpCvDQ6P5gi1TWffE
 L4ICP7CDy1eBj4L8IDcdPXcOWcrWGti4A+zBcIoshHzA5KWA6mg5QxlKCO3VDQ3R
 3bpWjxcHdelHLDaJ7qyemspvBdukfyOCJfieagtdCuwfw2GU5Uvx1wbu1G7vIhSh
 nL/gyaGei/buOhd45751
 =K5K4
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20190108-pull-request' into staging

usb: generic sysbus ehci, bugfixes.

# gpg: Signature made Tue 08 Jan 2019 15:53:37 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20190108-pull-request:
  usb: move ehci_create_ich9_with_companions to hw/i386
  hw/usb: Add generic sys-bus EHCI controller
  usb: dev-mtp: fix memory leak in error path
  usb: drop unnecessary usb_device_post_load checks
  hw/usb: fix mistaken de-initialization of CCID state

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-08 16:07:32 +00:00
Paolo Bonzini
efce3175fd usb: move ehci_create_ich9_with_companions to hw/i386
This function is only needed when Q35 is in use.  Moving it to
the same file that uses it lets you disable the entire USB
subsystem in x86_64-softmmu.mak; of course doing that will
cause -usb to break horribly, but one thing at a time.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1545064358-4601-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-08 12:43:41 +01:00
Marc-André Lureau
a310e653ce compat: remove remaining PC_COMPAT macros
Use static arrays instead.  I decided to rename the conflicting
pc_compat_2_1() function with pc_compat_2_1_fn().

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:42 +04:00
Marc-André Lureau
c4fc5695b7 compat: replace PC_COMPAT_2_1 & HW_COMPAT_2_1 macros
Use static arrays instead.  I decided to rename the conflicting
pc_compat_2_1() function with pc_compat_2_1_fn().

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:42 +04:00
Marc-André Lureau
1c30044e1a compat: replace PC_COMPAT_2_2 & HW_COMPAT_2_2 macros
Use static arrays instead.  I decided to rename the conflicting
pc_compat_2_2() function with pc_compat_2_2_fn().

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:42 +04:00
Marc-André Lureau
8995dd9009 compat: replace PC_COMPAT_2_3 & HW_COMPAT_2_3 macros
Use static arrays instead.  I decided to rename the conflicting
pc_compat_2_3() function with pc_compat_2_3_fn().

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:42 +04:00
Marc-André Lureau
2f99b9c273 compat: replace PC_COMPAT_2_4 & HW_COMPAT_2_4 macros
Use static arrays instead.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:42 +04:00
Marc-André Lureau
fe759610d5 compat: replace PC_COMPAT_2_5 & HW_COMPAT_2_5 macros
Use static arrays instead.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:42 +04:00
Marc-André Lureau
ff8f261f11 compat: replace PC_COMPAT_2_6 & HW_COMPAT_2_6 macros
Use static arrays instead.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:42 +04:00
Marc-André Lureau
5a995064db compat: replace PC_COMPAT_2_7 & HW_COMPAT_2_7 macros
Use static arrays instead.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:42 +04:00
Marc-André Lureau
edc24ccda4 compat: replace PC_COMPAT_2_8 & HW_COMPAT_2_8 macros
Use static arrays instead.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:42 +04:00
Marc-André Lureau
3e8031525a compat: replace PC_COMPAT_2_9 & HW_COMPAT_2_9 macros
Use static arrays instead.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:42 +04:00
Marc-André Lureau
503224f4c8 compat: replace PC_COMPAT_2_10 & HW_COMPAT_2_10 macros
Use static arrays instead.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:41 +04:00
Marc-André Lureau
43df70a9dd compat: replace PC_COMPAT_2_11 & HW_COMPAT_2_11 macros
Use static arrays instead.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:41 +04:00
Marc-André Lureau
0d47310b03 compat: replace PC_COMPAT_2_12 & HW_COMPAT_2_12 macros
Use static arrays instead.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:41 +04:00
Marc-André Lureau
ddb3235de1 compat: replace PC_COMPAT_3_0 & HW_COMPAT_3_0 macros
Use static arrays instead.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:41 +04:00
Marc-André Lureau
abd93cc7df compat: replace PC_COMPAT_3_1 & HW_COMPAT_3_1 macros
Use static arrays instead.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:41 +04:00
Marc-André Lureau
88cbe07374 machine: move compat properties out of globals
Move the compat arrays inside functions that use them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:41 +04:00
Marc-André Lureau
b66bbee39f hw: apply machine compat properties without touching globals
Similarly to accel properties, move compat properties out of globals
registration, and apply the machine compat properties during
device_post_init().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:41 +04:00
Marc-André Lureau
fa386d989d machines: replace COMPAT define with a static array
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07 16:18:41 +04:00
Peter Xu
47748bbba2 x86-iommu: turn on IR by default if proper
When the user didn't specify "intremap" for the IOMMU device, we turn
it on by default if it is supported.  This will turn IR on for the
default Q35 platform as long as the IOMMU device is specified on new
kernels.

Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20 13:25:11 -05:00
Peter Xu
a924b3d8df x86-iommu: switch intr_supported to OnOffAuto type
Switch the intr_supported variable from a boolean to OnOffAuto type so
that we can know whether the user specified it or not.  With that
we'll have a chance to help the user to choose more wisely where
possible.  Introduce x86_iommu_ir_supported() to mask these changes.

No functional change at all.

Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20 13:25:11 -05:00
Peter Xu
b2fc91db84 q35: set split kernel irqchip as default
Starting from QEMU 4.0, let's specify "split" as the default value for
kernel-irqchip.

So for QEMU>=4.0 we'll have: allowed=Y,required=N,split=Y
   for QEMU<=3.1 we'll have: allowed=Y,required=N,split=N
   (omitting all the "kernel_irqchip_" prefix)

Note that this will let the default q35 machine type to depend on
Linux version 4.4 or newer because that's where split irqchip is
introduced in kernel.  But it's fine since we're boosting supported
Linux version for QEMU 4.0 to around Linux 4.5.  For more information
please refer to the discussion on AMD's RDTSCP:

  https://lore.kernel.org/lkml/20181210181328.GA762@zn.tnic/

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20 13:25:11 -05:00
Thomas Huth
cc425b5ddf hw/i386: Remove deprecated machines pc-0.10 and pc-0.11
They've been deprecated for two releases and nobody complained that they
are still required anymore, so it's time to remove these now.
And while we're at it, mark the other remaining old 0.x machine types
as deprecated (since they can not properly be used for live-migration
anyway).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-20 11:19:12 -05:00
Samuel Ortiz
a46ce1c26d hw: acpi: Export and share the ARM RSDP build
Now that build_rsdp() supports building both legacy and current RSDP
tables, we can move it to a generic folder (hw/acpi) and have the i386
ACPI code reuse it in order to reduce code duplication.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
2018-12-19 16:48:16 -05:00
Igor Mammedov
3bb3006a63 hw: i386: Use correct RSDT length for checksum
AcpiRsdpDescriptor describes revision 2 RSDP table so using sizeof(*rsdp)
for checksum calculation isn't correct since we are adding extra 16 bytes.
But acpi_data_push() zeroes out table, so just by luck we are summing up
exta zeros which still yelds correct checksum.

Fix it up by explicitly stating table size instead of using
pointer arithmetics on stucture.

PS:
Extra 16 bytes are still wasted, but droping them will break migration
for machines older than 2.3 due to size mismatch, for 2.3 and older it's
not an issue since they are using resizable memory regions (a1666142d)
for ACPI blobs. So keep wasting memory to avoid breaking old machines.

Fixes: 72c194f7e (i386: ACPI table generation code from seabios)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19 16:48:16 -05:00
Samuel Ortiz
cd5a527108 hw: acpi: The RSDP build API can return void
For both x86 and ARM architectures, the internal RSDP build API can
return void as the current return value is unused.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19 16:48:16 -05:00
Peter Xu
4b49b586c4 intel_iommu: remove "x-" prefix for "aw-bits"
We're going to have 57bits aw-bits support sooner.  It's possibly time
to remove the "x-" prefix.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19 16:48:16 -05:00
Peter Xu
ccc23bb08a intel_iommu: dma read/write draining support
Support DMA read/write draining should be easy for existing VT-d
emulation since the emulation itself does not have any request queue
there so we don't need to do anything to flush the un-commited queue.
What we need to do is to declare the support.

These capabilities are required to pass Windows SVVP test program.  It
is verified that when with parameters "x-aw-bits=48,caching-mode=off"
we can pass the Windows SVVP test with this patch applied.  Otherwise
we'll fail with:

        IOMMU[0] - DWD (DMA write draining) not supported
        IOMMU[0] - DWD (DMA read draining) not supported
        Segment 0 has no DMA remapping capable IOMMU units

However since these bits are not declared support for QEMU<=3.1, we'll
need a compatibility bit for it and we turn this on by default only
for QEMU>=4.0.

Please refer to VT-d spec 6.5.4 for more information.

CC: Yu Wang <wyu@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1654550
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19 16:48:16 -05:00
Peter Xu
095955b24d intel_iommu: convert invalid traces into error reports
Report more *_invalid() tracepoints to error_report_once() so that we
can detect issues even without tracing enabled.  Drop those tracepoints.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19 16:48:16 -05:00
Peter Xu
662b4b69ba intel_iommu: dump correct iova when failed
The iotlb.iova can be zero if failure really happened.  Dump the addr
instead.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19 16:48:16 -05:00
Philippe Mathieu-Daudé
a2eb5c0cf7 hw/smbios: Move to the hw/firmware/ subdirectory
SMBIOS is just another firmware interface used by some QEMU models.
We will later introduce more firmware interfaces in this subdirectory.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19 16:48:16 -05:00
Daniel Henrique Barboza
46ea94ca9c qmp: query-current-machine with wakeup-suspend-support
When issuing the qmp/hmp 'system_wakeup' command, what happens in a
nutshell is:

- qmp_system_wakeup_request set runstate to RUNNING, sets a wakeup_reason
and notify the event
- in the main_loop, all vcpus are paused, a system reset is issued, all
subscribers of wakeup_notifiers receives a notification, vcpus are then
resumed and the wake up QAPI event is fired

Note that this procedure alone doesn't ensure that the guest will awake
from SUSPENDED state - the subscribers of the wake up event must take
action to resume the guest, otherwise the guest will simply reboot. At
this moment, only the ACPI machines via acpi_pm1_cnt_init and xen_hvm_init
have wake-up from suspend support.

However, only the presence of 'system_wakeup' is required for QGA to
support 'guest-suspend-ram' and 'guest-suspend-hybrid' at this moment.
This means that the user/management will expect to suspend the guest using
one of those suspend commands and then resume execution using system_wakeup,
regardless of the support offered in system_wakeup in the first place.

This patch creates a new API called query-current-machine [1], that holds
a new flag called 'wakeup-suspend-support' that indicates if the guest
supports wake up from suspend via system_wakeup. The machine is considered
to implement wake-up support if a call to a new 'qemu_register_wakeup_support'
is made during its init, as it is now being done inside acpi_pm1_cnt_init
and xen_hvm_init. This allows for any other machine type to declare wake-up
support regardless of ACPI state or wakeup_notifiers subscription, making easier
for newer implementations that might have their own mechanisms in the future.

This is the expected output of query-current-machine when running a x86
guest:

{"execute" : "query-current-machine"}
{"return": {"wakeup-suspend-support": true}}

Running the same x86 guest, but with the --no-acpi option:

{"execute" : "query-current-machine"}
{"return": {"wakeup-suspend-support": false}}

This is the output when running a pseries guest:

{"execute" : "query-current-machine"}
{"return": {"wakeup-suspend-support": false}}

With this extra tool, management can avoid situations where a guest
that does not have proper suspend/wake capabilities ends up in
inconsistent state (e.g.
https://github.com/open-power-host-os/qemu/issues/31).

[1] the decision of creating the query-current-machine API is based
on discussions in the QEMU mailing list where it was decided that
query-target wasn't a proper place to store the wake-up flag, neither
was query-machines because this isn't a static property of the
machine object. This new API can then be used to store other
dynamic machine properties that are scattered around the code
ATM. More info at:
https://lists.gnu.org/archive/html/qemu-devel/2018-05/msg04235.html

Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20181205194701.17836-2-danielhb413@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-18 07:55:47 +01:00
Peter Maydell
5250b09e57 hw/i386/multiboot.c: Don't use load_image()
The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Instead use load_image_size().

While we are converting the code, add the missing error check.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-7-peter.maydell@linaro.org
2018-12-14 13:30:51 +00:00
Peter Maydell
c24323dd5f hw/i386/pc.c: Don't use load_image()
The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Use the glib g_file_get_contents() function instead, which does
the whole "allocate memory for the file and read it in" operation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-6-peter.maydell@linaro.org
2018-12-14 13:30:51 +00:00
Eduardo Habkost
112394af1a pc: Use default_machine_opts to set suppress_vmdesc
Instead of setting suppress_vmdesc at instance_init time, set
default_machine_opts on pc_i440fx_2_2_machine_options() to
implement equivalent behavior.

This will let us eliminate the need for pc_compat_*() functions
for PC machine-types.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181205205827.19387-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-11 15:45:22 -02:00
Alex Williamson
84e060bf90 q35/440fx/arm/spapr: Add QEMU 4.0 machine type
Including all machine types that might have a pcie-root-port.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <154394083644.28192.8501647946108201466.stgit@gimli.home>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
[ehabkost: fixed accidental recursion at spapr_machine_3_1_class_options()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-11 15:45:22 -02:00
Corey Minyard
f5878b0381 i386: Rename bools in PCMachineState to end in _enabled
This makes their function more clear and prevents conflicts when adding
the actual devices to the machine state, if necessary.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181107152434.22219-1-minyard@acm.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-11 15:45:22 -02:00
Marc-André Lureau
4a93722f9c hw/i386: add pc-i440fx-3.1 & pc-q35-3.1
We have a couple of PC_COMPAT_3_0, so we should have 3.1 PC machines,
and update the 3.0 machines to make use of those.

Fixes a "Known issue" from https://wiki.qemu.org/Planning/3.1.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20181120132604.22854-1-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-11-20 11:42:32 -02:00
Singh, Brijesh
12499b2331 x86_iommu/amd: Enable Guest virtual APIC support
Now that amd-iommu support interrupt remapping, enable the GASup in IVRS
table and GASup in extended feature register to indicate that IOMMU
support guest virtual APIC mode. GASup provides option to guest OS to
make use of 128-bit IRTE.

Note that the GAMSup is set to zero to indicate that amd-iommu does not
support guest virtual APIC mode (aka AVIC) which would be used for the
nested VMs.

See Table 21 from IOMMU spec for interrupt virtualization controls

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Singh, Brijesh
135f866e60 x86_iommu/amd: Add interrupt remap support when VAPIC is enabled
Emulate the interrupt remapping support when guest virtual APIC is
enabled.

For more information refer: IOMMU spec rev 3.0 (section 2.2.5.2)

When VAPIC is enabled, it uses interrupt remapping as defined in
Table 22 and Figure 17 from IOMMU spec.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Singh, Brijesh
c028818d57 i386: acpi: add IVHD device entry for IOAPIC
When interrupt remapping is enabled, add a special IVHD device
(type IOAPIC).

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Singh, Brijesh
b44159fe00 x86_iommu/amd: Add interrupt remap support when VAPIC is not enabled
Emulate the interrupt remapping support when guest virtual APIC is
not enabled.

For more info Refer: AMD IOMMU spec Rev 3.0 - section 2.2.5.1

When VAPIC is not enabled, it uses interrupt remapping as defined in
Table 20 and Figure 15 from IOMMU spec.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Singh, Brijesh
577c470f43 x86_iommu/amd: Prepare for interrupt remap support
Register the interrupt remapping callback and read/write ops for the
amd-iommu-ir memory region.

amd-iommu-ir is set to higher priority to ensure that this region won't
be masked out by other memory regions.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Singh, Brijesh
53244386b0 x86_iommu/amd: make the address space naming consistent with intel-iommu
To be consistent with intel-iommu:

- rename the address space to use '_' instead of '-'
- update the memory region relationships

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Singh, Brijesh
470506b582 x86_iommu/amd: remove V=1 check from amdvi_validate_dte()
Currently, the amdvi_validate_dte() assumes that a valid DTE will
always have V=1. This is not true. The V=1 means that bit[127:1] are
valid. A valid DTE can have IV=1 and V=0 (i.e address translation
disabled and interrupt remapping enabled)

Remove the V=1 check from amdvi_validate_dte(), make the caller
responsible to check for V or IV bits.

This also fixes a bug in existing code that when error is
detected during the translation we'll fail the translation
instead of assuming a passthrough mode.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Singh, Brijesh
35c2450191 x86_iommu: move vtd_generate_msi_message in common file
The vtd_generate_msi_message() in intel-iommu is used to construct a MSI
Message from IRQ. A similar function will be needed when we add interrupt
remapping support in amd-iommu. Moving the function in common file to
avoid the code duplication. Rename it to x86_iommu_irq_to_msi_message().
There is no logic changes in the code flow.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Suggested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Singh, Brijesh
50662ce16d x86_iommu: move the kernel-irqchip check in common code
Interrupt remapping needs kernel-irqchip={off|split} on both Intel and AMD
platforms. Move the check in common place.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Peter Xu
c28b535d08 intel_iommu: handle invalid ce for shadow sync
We should handle VTD_FR_CONTEXT_ENTRY_P properly when synchronizing
shadow page tables.  Having invalid context entry there is perfectly
valid when we move a device out of an existing domain.  When that
happens, instead of posting an error we invalidate the whole region.

Without this patch, QEMU will crash if we do these steps:

(1) start QEMU with VT-d IOMMU and two 10G NICs (ixgbe)
(2) bind the NICs with vfio-pci in the guest
(3) start testpmd with the NICs applied
(4) stop testpmd
(5) rebind the NIC back to ixgbe kernel driver

The patch should fix it.

Reported-by: Pei Zhang <pezhang@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1627272
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Peter Xu
95ecd3df78 intel_iommu: move ce fetching out when sync shadow
There are two callers for vtd_sync_shadow_page_table_range(): one
provided a valid context entry and one not.  Move that fetching
operation into the caller vtd_sync_shadow_page_table() where we need to
fetch the context entry.

Meanwhile, remove the error_report_once() directly since we're already
tracing all the error cases in the previous call.  Instead, return error
number back to caller.  This will not change anything functional since
callers are dropping it after all.

We do this move majorly because we want to do something more later in
vtd_sync_shadow_page_table().

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Peter Xu
2cc9ddcceb intel_iommu: better handling of dmar state switch
QEMU is not handling the global DMAR switch well, especially when from
"on" to "off".

Let's first take the example of system reset.

Assuming that a guest has IOMMU enabled.  When it reboots, we will drop
all the existing DMAR mappings to handle the system reset, however we'll
still keep the existing memory layouts which has the IOMMU memory region
enabled.  So after the reboot and before the kernel reloads again, there
will be no mapping at all for the host device.  That's problematic since
any software (for example, SeaBIOS) that runs earlier than the kernel
after the reboot will assume the IOMMU is disabled, so any DMA from the
software will fail.

For example, a guest that boots on an assigned NVMe device might fail to
find the boot device after a system reboot/reset and we'll be able to
observe SeaBIOS errors if we capture the debugging log:

  WARNING - Timeout at nvme_wait:144!

Meanwhile, we should see DMAR errors on the host of that NVMe device.
It's the DMA fault that caused a NVMe driver timeout.

The correct fix should be that we do proper switching of device DMA
address spaces when system resets, which will setup correct memory
regions and notify the backend of the devices.  This might not affect
much on non-assigned devices since QEMU VT-d emulation will assume a
default passthrough mapping if DMAR is not enabled in the GCMD
register (please refer to vtd_iommu_translate).  However that's required
for an assigned devices, since that'll rebuild the correct GPA to HPA
mapping that is needed for any DMA operation during guest bootstrap.

Besides the system reset, we have some other places that might change
the global DMAR status and we'd better do the same thing there.  For
example, when we change the state of GCMD register, or the DMAR root
pointer.  Do the same refresh for all these places.  For these two
places we'll also need to explicitly invalidate the context entry cache
and iotlb cache.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1625173
CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Cong Li <coli@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
--
v2:
- do the same for GCMD write, or root pointer update [Alex]
- test is carried out by me this time, by observing the
  vtd_switch_address_space tracepoint after system reboot
v3:
- rewrite commit message as suggested by Alex
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
Peter Xu
06aba4ca52 intel_iommu: introduce vtd_reset_caches()
Provide the function and use it in vtd_init().  Used to reset both
context entry cache and iotlb cache for the whole IOMMU unit.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
David Hildenbrand
fd3416f5eb pc-dimm: pass PCDIMMDevice to pc_dimm_.*plug
We're plugging/unplugging a PCDIMMDevice, so directly pass this type
instead of a more generic DeviceState.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-5-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24 06:44:59 -03:00
Markus Armbruster
d319e05d6f pc: Fix machine property nvdimm-persistence error handling
Calling error_report() in a function that takes an Error ** argument
is suspicious.  pc.c's pc_machine_set_nvdimm_persistence() does that,
and then exit()s.  Wrong.  Attempting to set machine property
nvdimm-persistence to a bad value instantly kills the VM:

    $ qemu-system-x86_64 -nodefaults -S -display none -qmp stdio
    {"QMP": {"version": {"qemu": {"micro": 50, "minor": 0, "major": 3}, "package": "v3.0.0-837-gc5e4e49258"}, "capabilities": []}}
    {"execute": "qmp_capabilities"}
    {"return": {}}
    {"execute": "qom-set", "arguments": {"path": "/machine", "property": "nvdimm-persistence", "value": "instadeath"}}
    -machine nvdimm-persistence=instadeath: unsupported option
    $ echo $?
    1

Broken when commit 11c39b5cd9 (v3.0.0) replaced error_propagate();
return by error_report(); exit() instead of error_setg(); return.  Fix
that.

Fixes: 11c39b5cd9
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-10-armbru@redhat.com>
2018-10-19 14:51:34 +02:00
Yongji Xie
4c3e250627 kvmclock: run KVM_KVMCLOCK_CTRL ioctl in vcpu thread
According to KVM API Documentation, we should only
run vcpu ioctls from the same thread that was used
to create the vcpu. This patch makes KVM_KVMCLOCK_CTRL
ioctl consistent with the Documentation.

No functional change.

Signed-off-by: Yongji Xie <xieyongji@baidu.com>
Signed-off-by: Chai Wen <chaiwen@baidu.com>
Message-Id: <1531315364-2551-1-git-send-email-xieyongji@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yongji Xie <elohimes@gmail.com>
2018-10-02 19:09:13 +02:00
Li Zhijian
f3839fda57 change get_image_size return type to int64_t
Previously, if the size of initrd >=2G, qemu exits with error:
root@haswell-OptiPlex-9020:/home/lizj# /home/lizhijian/lkp/qemu-colo/x86_64-softmmu/qemu-system-x86_64 -kernel ./vmlinuz-4.16.0-rc4 -initrd large.cgz -nographic
qemu: error reading initrd large.cgz: No such file or directory
root@haswell-OptiPlex-9020:/home/lizj# du -sh large.cgz
2.5G	large.cgz

this patch changes the caller side that use this function to calculate
size of initrd file as well.

v2: update error message and int64_t printing format

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <1536833233-14121-1-git-send-email-lizhijian@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02 19:08:49 +02:00
Peter Maydell
2f831d0498 Error reporting & miscellaneous patches for 2018-09-24
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbqP/iAAoJEDhwtADrkYZTDTQP/jidzPBq+9SbQTkP3/6DNdyq
 3amvEA0lNlowGz+VQtTPjG1Sw+wr5PRFFjthueX4EXCgTih9db5Rd6Daiqt9uuh4
 ipep7OVTcyMOErHzyosIIwQAte2ERiunpwXOAcahxInJ4XBlxyJAiJTZXHQb1v+u
 zKa3PpKi3fLcqBs3wKn8AJmp5HLTYOM6/LK870S65Rzx20AbifBH/6yQPkdrMAL2
 lw204RasdYCiJo045n6pwZ0mBMT1d33VAmSqPUaeoOWabLCzmbZvcQNwUqtVleh6
 5IoAxjFhrixksdg67+HMyFyJH5Nt8SkTeOpqN4D+dpj7y3BLGSUzvV3mBEBSfinm
 nvyfjVkxX4xRNw4mgm03H2qg5g3FACDQVz+g5uLDAZELlz9POCnOTFJuf/n++u3q
 zcxOqCg2U99KiyF51PMRu9yPH/zDNNFxmrEY7dFkuAycS3EWk+VK63pXnNUkx3xe
 0T8uZA4Cvhn84hLNDFyX/DzILKFb0bRSUw6zAhUYb44oD6roFlp8rgTauNECa9CO
 GcgvJKXyk6mMDEHkSKSWy51doVEn0vqqzEc9w6/QPwxsXNMUWXEQAv/BVaK7To/J
 JlSxC/C/jda4pt6zDFks6grac8AT6LBIFUrp6HpF84gSldEF4OuFbJhg9iuTyarz
 ea5pvvZGJHQvnLATg5kK
 =2oaJ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-09-24' into staging

Error reporting & miscellaneous patches for 2018-09-24

# gpg: Signature made Mon 24 Sep 2018 16:16:50 BST
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2018-09-24:
  MAINTAINERS: Fix F: patterns that don't match anything
  Drop "qemu:" prefix from error_report() arguments
  qemu-error: make use of {error, warn}_report_once_cond
  qemu-error: add {error, warn}_report_once_cond

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25 11:37:39 +01:00
Mao Zhongyi
371b74e221 Drop "qemu:" prefix from error_report() arguments
error_report and friends already add a "qemu-system-xxx" prefix
to the string, so a "qemu:" prefix is redundant in the string.
Just drop it.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1537495530-580-1-git-send-email-maozhongyi@cmss.chinamobile.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-09-24 17:13:07 +02:00
Igor Mammedov
dbb6da8ba7 pc: acpi: revert back to 1 SRAT entry for hotpluggable area
Commit
  10efd7e108 "pc: acpi: fix memory hotplug regression by reducing stub SRAT entry size"
attemped to fix hotplug regression introduced by
  848a1cc1e "hw/acpi-build: build SRAT memory affinity structures for DIMM devices"

fixed issue for Windows/3.0+ linux kernels, however it regressed 2.6 based
kernels (RHEL6) to the point where guest might crash at boot.
Reason is that 2.6 kernel discards SRAT table due too small last entry
which down the road leads to crashes. Hack I've tried in 10efd7e108 is also
not ACPI spec compliant according to which whole possible RAM should be
described in SRAT. Revert 10efd7e108 to fix regression for 2.6 based kernels.

With 10efd7e108 reverted, I've also tried splitting SRAT table statically
in different ways %/node and %/slot but Windows still fails to online
2nd pc-dimm hot-plugged into node 0 (as described in 10efd7e108) and
sometimes even coldplugged pc-dimms where affected with static SRAT
partitioning.
The only known so far way where Windows stays happy is when we have 1
SRAT entry in the last node covering all hotplug area.

Revert 848a1cc1e until we come up with a way to avoid regression
on Windows with hotplug area split in several entries.
Tested this with 2.6/3.0 based kernels (RHEL6/7) and WS20[08/12/12R2/16]).

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-07 17:05:18 -04:00
Peter Xu
4e4abd111a intel-iommu: replace more vtd_err_* traces
Replace all the trace_vtd_err_*() hooks with the new error_report_once()
since they are similar to trace_vtd_err() - dumping the first error
would be mostly enough, then we have them on by default too.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815095328.32414-4-peterx@redhat.com>
[Use "%x" instead of "%" PRIx16 to print uint16_t, whitespace tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-27 15:09:20 +02:00
Peter Xu
1376211f77 intel-iommu: start to use error_report_once
Replace existing trace_vtd_err() with error_report_once() then stderr
will capture something if any of the error happens, meanwhile we don't
suffer from any DDOS.  Then remove the trace point.  Since at it,
provide more information where proper (now we can pass parameters into
the report function).

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815095328.32414-3-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[Two format strings fixed, whitespace tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-27 15:00:45 +02:00
David Hildenbrand
b0e624435b pc-dimm: assign and verify the "addr" property during pre_plug
We can assign and verify the address before realizing and trying to plug.
reading/writing the address property should never fail for DIMMs, so let's
reduce error handling a bit by using &error_abort. Getting access to the
memory region now might however fail. So forward errors from
get_memory_region() properly.

As all memory devices should use the alignment of the underlying memory
region for guest physical address asignment, do detection of the
alignment in pc_dimm_pre_plug(), but allow pc.c to overwrite the
alignment for compatibility handling.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
David Hildenbrand
57f0b73cf8 pc: drop memory region alignment check for 0
All applicable memory regions always have an alignment > 0. All memory
backends result in file_ram_alloc() or qemu_anon_ram_alloc() getting
called, setting the alignment to > 0.

So a PCDIMM memory region always has an alignment > 0. NVDIMM copy the
alignment of the original memory memory region into the handcrafted memory
region that will be used at this place.

So the check for 0 can be dropped and we can reduce the special
handling.

Dropping this check makes factoring out of alignment handling easier as
compat handling only has to look at pcmc->enforce_aligned_dimm and not
care about the alignment of the memory region.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-4-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
David Hildenbrand
8f1ffe5be8 pc-dimm: assign and verify the "slot" property during pre_plug
We can assign and verify the slot before realizing and trying to plug.
reading/writing the slot property should never fail, so let's reduce
error handling a bit by using &error_abort.

To do this during pre_plug, add and use (x86, ppc) pc_dimm_pre_plug().

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Igor Mammedov
10efd7e108 pc: acpi: fix memory hotplug regression by reducing stub SRAT entry size
Commit 848a1cc1e (hw/acpi-build: build SRAT memory affinity structures for DIMM devices)
broke the first dimm hotplug in following cases:

 1: there is no coldplugged dimm in the last numa node
    but there is a coldplugged dimm in another node

  -m 4096,slots=4,maxmem=32G               \
  -object memory-backend-ram,id=m0,size=2G \
  -device pc-dimm,memdev=m0,node=0         \
  -numa node,nodeid=0                      \
  -numa node,nodeid=1

 2: if order of dimms on CLI is:
       1st plugged dimm in node1
       2nd plugged dimm in node0

  -m 4096,slots=4,maxmem=32G               \
  -object memory-backend-ram,size=2G,id=m0 \
  -device pc-dimm,memdev=m0,node=1         \
  -object memory-backend-ram,id=m1,size=2G \
  -device pc-dimm,memdev=m1,node=0         \
  -numa node,nodeid=0                      \
  -numa node,nodeid=1

(qemu) object_add memory-backend-ram,id=m2,size=1G
(qemu) device_add pc-dimm,memdev=m2,node=0

the first DIMM hotplug to any node except the last one
fails (Windows is unable to online it).

Length reduction of stub hotplug memory SRAT entry,
fixes issue for some reason.

RHBZ: 1609234

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-03 11:35:21 +03:00
Dou Liyang
16b4226363 hw/acpi-build: Add a check for memory-less NUMA nodes
Currently, Qemu ACPI builder doesn't consider the memory-less NUMA nodes, eg:

  -m 4G,slots=4,maxmem=8G \
  -numa node,nodeid=0 \
  -numa node,nodeid=1,mem=2G \
  -numa node,nodeid=2,mem=2G \
  -numa node,nodeid=3\

Guest Linux will report

  [    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xffffffffffffffff]
  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00000000-0x0009ffff]
  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00100000-0x7fffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x80000000-0xbfffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x100000000-0x13fffffff]
  [    0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x13fffffff]
  [    0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x33fffffff] hotplug

[mem 0x00000000-0xffffffffffffffff] and [mem 0x140000000-0x13fffffff] are bogus.

Add a check to avoid building srat memory for memory-less NUMA nodes, also update
the test file. Now the info in guest linux will be

  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00000000-0x0009ffff]
  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00100000-0x7fffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x80000000-0xbfffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x100000000-0x13fffffff]
  [    0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x33fffffff] hotplug

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-03 11:35:21 +03:00
Daniel P. Berrangé
f8da93a0ff i386: only parse the initrd_filename once for multiboot modules
The multiboot code parses the initrd_filename twice, first to count how
many entries there are, and second to process each entry. This changes
the first loop to store the parse module names in a list, and the second
loop can now use these names. This avoids having to pass NULL to the
get_opt_value() method which means it can safely assume a non-NULL param.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180514171913.17664-3-berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-17 16:24:50 +02:00
Daniel P. Berrangé
6e3ad3f0e3 i386: fix regression parsing multiboot initrd modules
The logic for parsing the multiboot initrd modules was messed up in

  commit 950c4e6c94
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Mon Apr 16 12:17:43 2018 +0100

    opts: don't silently truncate long option values

Causing the length to be undercounter, and the number of modules over
counted. It also passes NULL to get_opt_value() which was not robust
at accepting a NULL value.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180514171913.17664-2-berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-17 16:24:49 +02:00
Roman Kagan
e9688fabc3 hyperv: ensure VP index equal to QEMU cpu_index
Hyper-V identifies vCPUs by Virtual Processor (VP) index which can be
queried by the guest via HV_X64_MSR_VP_INDEX msr.  It is defined by the
spec as a sequential number which can't exceed the maximum number of
vCPUs per VM.

It has to be owned by QEMU in order to preserve it across migration.

However, the initial implementation in KVM didn't allow to set this
msr, and KVM used its own notion of VP index.  Fortunately, the way
vCPUs are created in QEMU/KVM makes it likely that the KVM value is
equal to QEMU cpu_index.

So choose cpu_index as the value for vp_index, and push that to KVM on
kernels that support setting the msr.  On older ones that don't, query
the kernel value and assert that it's in sync with QEMU.

Besides, since handling errors from vCPU init at hotplug time is
impossible, disable vCPU hotplug.

This patch also introduces accessor functions to encapsulate the mapping
between a vCPU and its vp_index.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180702134156.13404-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-16 16:58:16 +02:00
Peter Maydell
46d0885adf pc, virtio: fixes
A couple of fixes to amd iommu, and a fix to virtio iommu.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbND4FAAoJECgfDbjSjVRpPfMH/20ND3U1FM65HtH0DNg62ABl
 qGcgyQvwSTBG74IEBoDAvZPXJ7s2OPDSdcKGoHgGMGLWYU/Xno6GR6G8dKW0U9Jk
 /FOfhGEITFBCBsvzXM40+HqHhL2iNkw2PGt3aJqtx8BHJEnPzBmCKEIl6NmYHi9d
 dp9iMerYaJtXWDyPGwk0vEFZTsjQomRz33KyRF2jGM/8QJH5X50UuYaDGQHTA6OH
 5LSIfOf39hcXxssTAR+nZjJQIbNcJ5vXHXgGWWlA0TBF0/0eoJLsFehEEVKlLjUy
 1bzM/90SgrTFFbJWULm1Y/0phAl02v/4NSKWg2x2hlJDRbttHrskVg4Y5p5wmvo=
 =y+sn
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, virtio: fixes

A couple of fixes to amd iommu, and a fix to virtio iommu.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 28 Jun 2018 02:46:45 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  virtio-rng: process pending requests on DRIVER_OK
  hw/i386: Fix AMDVI GATS and HATS encodings
  hw/i386: Fix IVHD entry length for AMD IOMMU

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-03 09:49:20 +01:00
Paolo Bonzini
d471bf3ebb hw/i386: Use the IEC binary prefix definitions
It eases code review, unit is explicit.

Patch generated using:

  $ git grep -E '[<>][<>]=? ?[1-5]0' hw/ include/hw/

and modified manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:16 +02:00
Philippe Mathieu-Daudé
8f951a13f0 hw/xen: Use the IEC binary prefix definitions
It eases code review, unit is explicit.

Patch generated using:

  $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/

and modified manually.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alan Robinson <Alan.Robinson@ts.fujitsu.com>
Message-Id: <20180625124238.25339-12-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:13 +02:00
Peter Xu
0c8465440d hmp: obsolete "info ioapic"
Let's start to use "info pic" just like other platforms.  For now we
keep the command for a while so that old users can know what is the new
command to use.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171229073104.3810-6-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:37 +02:00
Peter Xu
cce5405e0e ioapic: support "info irq"
This include both userspace and in-kernel ioapic.  Note that the numbers
can be inaccurate for kvm-ioapic.  One reason is the same with
kvm-i8259, that when irqfd is used, irqs can be delivered all inside
kernel without our notice.  Meanwhile, kvm-ioapic is specially treated
when irq numbers <ISA_NUM_IRQS, those irqs will be delivered in kernel
too via kvm-i8259 (please refer to kvm_pc_gsi_handler).

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171229073104.3810-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:37 +02:00
David Hildenbrand
f0b7bca64d pc-dimm: get_memory_region() will not fail after realize
Let's try to reduce error handling a bit. In the plug/unplug case, the
device was realized and therefore we can assume that getting access to
the memory region will not fail.

For get_vmstate_memory_region() this is already handled that way.
Document both cases.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180619134141.29478-13-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:34 +02:00
David Hildenbrand
d468115b1c pc: factor out pc specific dimm checks into pc_memory_pre_plug()
We can perform these checks before the device is actually realized.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180619134141.29478-6-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:33 +02:00
David Hildenbrand
284878ee98 pc-dimm: rename pc_dimm_memory_* to pc_dimm_*
Let's rename it to make it look more consistent.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180619134141.29478-4-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:33 +02:00
David Hildenbrand
bb6e2f7a54 pc: rename pc_dimm_(plug|unplug|...)* into pc_memory_(plug|unplug|...)*
Use a similar naming scheme as spapr. This way, we can go ahead and
rename e.g. pc_dimm_memory_plug to pc_dimm_plug, which avoids
confusion.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180619134141.29478-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:32 +02:00
Jan Kiszka
2073bd43bd hw/i386: Fix AMDVI GATS and HATS encodings
We support up to 6 levels, but those are encoded as 10b according to the
AMD IOMMU spec (chapter 3.3.1, Extended Feature Register).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-26 21:58:03 +03:00
Jan Kiszka
0b363b61f1 hw/i386: Fix IVHD entry length for AMD IOMMU
Counting from the IVHD ID field to the all-devices entry, we have 28
bytes, not 36.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-26 21:58:03 +03:00
Thomas Huth
08fe68244e hw/i386: Deprecate the machine types pc-0.10 and pc-0.11
The oldest machine type which is still used in a still maintained distro
is a pc-0.12 based machine type in RHEL6, so everything that is older
than pc-0.12 should not be used anymore. Thus let's deprecate pc-0.10
and pc-0.11 so that we can finally remove them in a future release.

Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1529917512-10528-1-git-send-email-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-25 14:10:01 -03:00
Gerd Hoffmann
94692dcd71 hw/display: add standalone ramfb device
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20180613122948.18149-3-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-18 11:22:15 +02:00
Peter Maydell
2c91bcf273 iommu: Add IOMMU index argument to translate method
Add an IOMMU index argument to the translate method of
IOMMUs. Since all of our current IOMMU implementations
support only a single IOMMU index, this has no effect
on the behaviour.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-4-peter.maydell@linaro.org
2018-06-15 15:23:34 +01:00
Peter Maydell
cb1efcf462 iommu: Add IOMMU index argument to notifier APIs
Add support for multiple IOMMU indexes to the IOMMU notifier APIs.
When initializing a notifier with iommu_notifier_init(), the caller
must pass the IOMMU index that it is interested in. When a change
happens, the IOMMU implementation must pass
memory_region_notify_iommu() the IOMMU index that has changed and
that notifiers must be called for.

IOMMUs which support only a single index don't need to change.
Callers which only really support working with IOMMUs with a single
index can use the result of passing MEMTXATTRS_UNSPECIFIED to
memory_region_iommu_attrs_to_index().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-3-peter.maydell@linaro.org
2018-06-15 15:23:34 +01:00
Peter Maydell
2ab09bf2f9 usb: bug fix collection, doc update.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJbH6QBAAoJEEy22O7T6HE4ZwMP/RHEknxR+tGKYfUxtVP24+ta
 tKMVuewqnDuIjUQsYj/tMvtGEvPd827Cy1X+ocqNq1Gk9aJez+DWWoDlrSXlLyiG
 r4EBMmOasFdmp1D9iQEDUF0pbnbXQv7kqhnM7XbyO+rjNe1rX7HElmRXtcjBcY2I
 QCIpekUBVGzFO97pVzB66gwYpJvmQu2YS2783NaujeS9VEEUFy6RFCFhfNwxhA4W
 C264zFVk68oK1fL+71Y3Kq0WKmetBwfW2ozcBAnqLB5z0hGd9bHJocaLwqgaaQWC
 uaGUJS70Q7iWZ8NwOYvrpK/2ZetjPAeU6ERXeR7tK6yfkjV9UmpPXQ0aqu1OSgEr
 VjuMPEDK0tL8pgcuhhxkJOD6S/HNyCe8y7WLeHKpd21Mv+R2yB1zs2xsWrdMqreZ
 2YXUpgvIaZJBycO8vzmzWwiSNInOGO/3Vu1kpUP4T/rdmFZ1q5f8tGgwMlq/JsU4
 Ce/p0BCcCXvcG+2x5uouffIuTur4DUPn93BCUmjy/TuyggtXVNoQHEVGrMDjiyO/
 9RFVUgJl32mTbIqfVaWkweTch/yXm4XVrlbcTW3VhCCVWyA9O0m+MwyjIoNeXn8L
 yPLF+3ndYgMoTJBFZ20HWEGhZ2+I54fhn/iRW6Nq7qtZ2rOP//K2CqyEp/CuQWis
 vxb796sHEPPUeTCoCiVY
 =sxQ0
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180612-pull-request' into staging

usb: bug fix collection, doc update.

# gpg: Signature made Tue 12 Jun 2018 11:44:17 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20180612-pull-request:
  usb-mtp: Return error on suspicious TYPE_DATA packet from initiator
  usb-hcd-xhci-test: add a test for ccid hotplug
  usb-ccid: fix bus leak
  object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalence
  bus: do not unref the added child bus on realize
  usb/dev-mtp: Fix use of uninitialized values
  usb: correctly handle Zero Length Packets
  usb: update docs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-12 15:34:34 +01:00
Peter Maydell
59f3a1c6ac pc: fixes
A couple of fixes to acpi and nvdimm.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbHsufAAoJECgfDbjSjVRp7rUH/ivy7ZOfJU98VemRJK325KJ2
 AzsJgn3jKBvlaq4WtsQdspi+eTi9p0kupFJqFxRdpDgPnYjjegDGOjY0RrnhPL19
 lXpwWixZvWAL5zZ60p8RYZxYP9AeFUDQ8wX091uB8phQfBdTUwxCE88bznv2ZUbz
 He3rEMJpMZIorUe8P+RVrUNWHcIdvCZkqYhxt0nZR4YkeaANVCngXGaexBzxdRXR
 oT3cKsmshFPMV+LUr3/os3I5YiOSLCWflTCgnlhhW0rKPbDWFJOtqF78bjLJrR/p
 9SuqW0vmB3JcXXsSWUFvuBo4K0hXgNZEI2hrFVxhkXtw5Ij35ufCCizhmalAaVk=
 =m9VP
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc: fixes

A couple of fixes to acpi and nvdimm.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 11 Jun 2018 20:21:03 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  nvdimm: make persistence option symbolic
  hw/i386: Update SSDT table used by "make check"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-12 12:42:15 +01:00
Marc-André Lureau
265b578c58 object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalence
A link property can be set during creation, with
object_property_add_link() and later with object_property_set_link().

add_link() doesn't add a reference to the target object, while
set_link() does.

Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link,
says whether a reference must be released when the property is destroyed.
This can lead to leaks if the property was later set_link(), as the
added reference is never released.

Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG
and use that has an indication on how the link handle reference
management in set_link().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-12 12:07:30 +02:00
Ross Zwisler
11c39b5cd9 nvdimm: make persistence option symbolic
Replace the "nvdimm-cap" option which took numeric arguments such as "2"
with a more user friendly "nvdimm-persistence" option which takes symbolic
arguments "cpu" or "mem-ctrl".

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-11 22:19:57 +03:00
Eduardo Habkost
1fb6752ecf pc: Remove PC_COMPAT_2_12 from 3.0 machine-types
commit f548222c added PC_COMPAT_2_12 to the 3.0 PC machine-types.
I believe this happened during manual conflict resolution when
applying the patch.

Cc: Xiao Guangrong <xiaoguangrong@tencent.com>
Cc: Juan Quintela <quintela@redhat.com>
Fixes: f548222c24
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180608192940.19548-1-ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-10 21:33:00 -03:00
Peter Maydell
b74588a493 migration/next for 20180604
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJbFLygAAoJEPSH7xhYctcjszUP/j7/21sHXwPyB5y4CQHsivLL
 18MnXTkjgSlue3fuPKI9ZzD2VZq19AtwarLuW3IFf15adKfeV0hhZsIMUmu0XTAz
 jgol8YYgoYlk3/on8Ux8PWV9RWKHh7vWAF7hjwJOnI5CFF7gXz6kVjUx03A7RSnB
 1a92lvgl5P8AbK5HZ/i08nOaAxCUWIVIoQeZf3BlZ5WdJE0j+d0Mvp/S8NEq5VPD
 P6oYJZy64QFGotmV1vtYD4G/Hqe8XBw2LoSVgjPSmQpd1m4CXiq0iyCxtC8HT+iq
 0P0eHATRglc5oGhRV6Mi5ixH2K2MvpshdyMKVAbkJchKBHn4k3m6jefhnUXuucwC
 fq9x7VIYzQ80S+44wJri683yUWP3Qmbb6mWYBb1L0jgbTkY1wx431IYMtDVv5q4R
 oXtbe77G6lWKHH0SFrU8TY/fqJvBwpat+QwOoNsluHVjzAzpOpcVokB8pLj592/1
 bHkDwvv7i+B37muOF3PFy++BoliwpRiNbVC5Btw4mnbOoY+AeJHMRBuhJHU6EyJv
 GOFiQ5w5XEXEu98giNqHcc0AC8w7iTRGI472UzpS0AG20wpc1/2jF0yM99stauwD
 oIu3MU4dQlz6QRy8KFnJShqjYNYuOs59USLiYM79ABa9J+JxJxxTAaqRbUFojQR6
 KN2i0QQJ+6MO4Skjbu/3
 =K0eJ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180604' into staging

migration/next for 20180604

# gpg: Signature made Mon 04 Jun 2018 05:14:24 BST
# gpg:                using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/juanquintela/tags/migration/20180604:
  migration: not wait RDMA_CM_EVENT_DISCONNECTED event after rdma_disconnect
  migration: remove unnecessary variables len in QIOChannelRDMA
  migration: Don't activate block devices if using -S
  migration: discard non-migratable RAMBlocks
  migration: introduce decompress-error-check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04 12:54:00 +01:00
Peter Maydell
f67c9b693a acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
 cleanups, NFIT ACPI table.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
 LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
 EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
 odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
 a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
 KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
 =3+V0
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

acpi, vhost, misc: fixes, features

vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (31 commits)
  vhost-blk: turn on pre-defined RO feature bit
  ACPI testing: test NFIT platform capabilities
  nvdimm, acpi: support NFIT platform capabilities
  tests/.gitignore: add entry for generated file
  arch_init: sort architectures
  ui: use local path for local headers
  qga: use local path for local headers
  colo: use local path for local headers
  migration: use local path for local headers
  usb: use local path for local headers
  sd: fix up include
  vhost-scsi: drop an unused include
  ppc: use local path for local headers
  rocker: drop an unused include
  e1000e: use local path for local headers
  ioapic: fix up includes
  ide: use local path for local headers
  display: use local path for local headers
  trace: use local path for local headers
  migration: drop an unused include
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04 10:15:16 +01:00