Right now the IPL device always starts from address 0x10000 (the usual
Linux entry point). To run other guests (e.g. test programs) it is
useful to use the IPL PSW from address 0. We can use the Linux magic
at 0x10008 to decide.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180612125933.262679-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The vfio-ccw module does the check too, and there is actually no
technical obstacle for supporting fmt 1 idaws. Let us be ready for the
beautiful day when fmt 1 idaws become supported by the vfio-ccw kernel
module. QEMU does not have to do a thing for that, except not insisting
on this check.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Jason J. Herne <jjherne@linux.ibm.com>
Tested-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <20180524175828.3143-3-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There is at least one guest (OS) such that although it does not rely on
the guarantees provided by ORB 1 word 9 bit (aka unlimited prefetch, aka
P bit) not being set, it fails to tell this to the machine.
Usually this ain't a big deal, as the original purpose of the P bit is to
allow for performance optimizations. vfio-ccw however can not provide the
guarantees required if the bit is not set.
It is not possible to implement support for the P bit not set without
transitioning to lower level protocols for vfio-ccw. So let's give the
user the opportunity to force setting the P bit, if the user knows this
is safe. For self modifying channel programs forcing the P bit is not
safe. If the P bit is forced for a self modifying channel program things
are expected to break in strange ways.
Let's also avoid warning multiple about P bit not set in the ORB in case
P bit is not told to be forced, and designate the affected vfio-ccw
device.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Suggested-by: Dong Jia Shi <bjsdjshi@linux.ibm.com>
Acked-by: Jason J. Herne <jjherne@linux.ibm.com>
Tested-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <20180524175828.3143-2-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Coverity recently started complaining about virtio_ccw_notify(). Turns
out, there is a couple of things that can be cleaned up. Let's clean!
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: CID 1390619
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20180516132757.68558-1-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add an IOMMU index argument to the translate method of
IOMMUs. Since all of our current IOMMU implementations
support only a single IOMMU index, this has no effect
on the behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-4-peter.maydell@linaro.org
Add support for multiple IOMMU indexes to the IOMMU notifier APIs.
When initializing a notifier with iommu_notifier_init(), the caller
must pass the IOMMU index that it is interested in. When a change
happens, the IOMMU implementation must pass
memory_region_notify_iommu() the IOMMU index that has changed and
that notifiers must be called for.
IOMMUs which support only a single index don't need to change.
Callers which only really support working with IOMMUs with a single
index can use the result of passing MEMTXATTRS_UNSPECIFIED to
memory_region_iommu_attrs_to_index().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-3-peter.maydell@linaro.org
Remove those unneeded includes to speed up the compilation
process a little bit.
Code change produced with:
$ git grep '#include "sysemu/blockdev.h"' | \
cut -d: -f-1 | \
xargs egrep -L "(BlockInterfaceType|DriveInfo|drive_get|blk_legacy_dinfo|blockdev_mark_auto_del)" | \
xargs sed -i.bak '/#include "sysemu\/blockdev.h"/d'
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-15-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove those unneeded includes to speed up the compilation
process a little bit. (Continue 7eceff5b5a cleanup)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-13-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to memory_region_access_valid().
Its callers either have an attrs value to hand, or don't care
and can use MEMTXATTRS_UNSPECIFIED.
The callsite in flatview_access_valid() is part of a recursive
loop flatview_access_valid() -> memory_region_access_valid() ->
subpage_accepts() -> flatview_access_valid(); we make it pass
MEMTXATTRS_UNSPECIFIED for now, until the next several commits
have plumbed an attrs parameter through the rest of the loop
and we can add an attrs parameter to flatview_access_valid().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-8-peter.maydell@linaro.org
Rename the 2.13 machines to match the number we're going to
use for the next release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180522104000.9044-4-peter.maydell@linaro.org
Calling pause_all_vcpus()/resume_all_vcpus() from a VCPU thread might
not be the best idea. As pause_all_vcpus() temporarily drops the qemu
mutex, two parallel calls to pause_all_vcpus() can be active at a time,
resulting in a deadlock. (either by two VCPUs or by the main thread and a
VCPU)
Let's handle it via the main loop instead, as suggested by Paolo. If we
would have two parallel reset requests by two different VCPUs at the
same time, the last one would win.
We use the existing ipl device to handle it. The nice side effect is
that we can get rid of reipl_requested.
This change implies that all reset handling now goes via the common
path, so "no-reboot" handling is now active for all kinds of reboots.
Let's execute any CPU initialization code on the target CPU using
run_on_cpu.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180424101859.10239-1-david@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Thomas reported that the subchannel for a 3270 device that ended up
in a broken state (status pending even though not enabled) did not
get out of that state even after a reboot (which involves a subsytem
reset). The reason for this is that the 3270 device did not define
a reset handler.
Let's fix this by introducing a base reset handler (set up for all
ccw devices) that resets the subchannel and have virtio-ccw call
its virtio-specific reset procedure in addition to that.
CC: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
All the different virtio ccw devices use the same reset handler,
so let's move setting it into the base virtio ccw device class.
CC: qemu-stable@nongnu.org
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The 3270 code will try to post an attention interrupt when the
3270 emulator (e.g. x3270) attaches. If the guest has not yet
enabled the subchannel for the 3270 device, we will present a spurious
cc 1 (status pending) when it uses msch on it later on, e.g. when
trying to enable the subchannel.
To fix this, just don't do anything in css_conditional_io_interrupt()
if the subchannel is not enabled. The 3270 code will work fine with
that, and the other user of this function (virtio-ccw) never
attempts to post an interrupt for a disabled device to begin with.
CC: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Rename the loadparm char array in main.c to loadparm_str and
increased the size by one byte to account for a null termination
when converting the loadparm string to an int via atoui. We
also allow the boot menu to be enabled when loadparm is set to
an empty string or a series of spaces.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The consoles ("sclpconsole" and "sclplmconsole") can only be configured
with "-device" and "-chardev" so far. Other machines use the convenience
option "-serial" to configure the default consoles, even for virtual
consoles like spapr-vty on the pseries machine. So let's support this
option on s390x, too. This way we can easily enable the serial console
here again with "-nodefaults", for example:
qemu-system-s390x -no-shutdown -nographic -nodefaults -serial mon:stdio
... which is way shorter than typing:
qemu-system-s390x -no-shutdown -nographic -nodefaults \
-chardev stdio,id=c1,mux=on -device sclpconsole,chardev=c1 \
-mon chardev=c1
The -serial parameter can also be used if you only want to see the QEMU
monitor on stdio without using -nodefaults, but not the console output.
That's something that is pretty impossible with the current code today:
qemu-system-s390x -no-shutdown -nographic -serial none
While we're at it, this patch also maps the second -serial option to the
"sclplmconsole", so that there is now an easy way to configure this second
console on s390x, too, for example:
qemu-system-s390x -no-shutdown -nographic -serial null -serial mon:stdio
Additionally, the new code is also smaller than the old one and we have
less s390x-specific code in vl.c :-)
I've also checked that migration still works as expected by migrating
a guest with console output back and forth between a qemu-system-s390x
that has this patch and an instance without this patch.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1524754794-28005-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We have a call to cpu_synchronize_state() on every kvm_arch_handle_exit().
Let's remove the ones that are no longer needed.
Remaining places (for s390x) are in
- target/s390x/sigp.c, on the target CPU
- target/s390x/cpu.c:s390_cpu_get_crash_info()
While at it, use kvm_cpu_synchronize_state() instead of
cpu_synchronize_state() in KVM code. (suggested by Thomas Huth)
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180412093521.2469-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Extend the SCLP event masks to 64 bits.
Notice that using any of the new bits results in a state that cannot be
migrated to an older version.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1520507069-22179-1-git-send-email-imbrenda@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Operating systems may request an IPL from a virtio-scsi device
by specifying an IPL parameter type of CCW. In this case QEMU
won't set up the IPLB correctly. The BIOS will still detect
it's a SCSI device to boot from, but it will now have to search
for the first LUN and attempt to boot from there.
However this may not be the original boot LUN if there's more than
one SCSI disk attached to the HBA.
With this change QEMU will detect that the request is for a
SCSI device and will rebuild the initial IPL parameter info
if it's the SCSI device used for the first boot. In consequence
the BIOS can use the boot LUN from the IPL information block.
In case a different SCSI device has been set, the BIOS will find
and use the first available LUN.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1522940844-12336-3-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Splitting out the the CCW device extraction allows reuse.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1522940844-12336-2-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The string returned by object_property_get_str() is dynamically allocated.
Fixes: 3c4e9baacf
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152231460685.69730.14860451936216690693.stgit@bahia.lan>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently we don't support pci multifunction. If a pci with
multifucntion is plugged, the guest will spin forever. This patch fixes
this.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
There would be savevm states (dirty-bitmap) which can migrate only in
postcopy stage. The corresponding pending is introduced here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-6-vsementsov@virtuozzo.com
Introduce an sccb_mask_t to be used for SCLP event masks instead of just
unsigned int or uint32_t. This will allow later to extend the mask with
more ease.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1519407778-23095-3-git-send-email-imbrenda@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Until 67915de9f0 ("s390x/event-facility: variable-length event masks")
we only supported sclp event masks with a size of exactly 4 bytes, even
though the architecture allows the guests to set up sclp event masks
from 1 to 1021 bytes in length.
After that patch, the behaviour was almost compliant, but some issues
were still remaining, in particular regarding the handling of selective
reads and migration.
When setting the sclp event mask, a mask size is also specified. Until
now we only considered the size in order to decide which bits to save
in the internal state. On the other hand, when a guest performs a
selective read, it sends a mask, but it does not specify a size; the
implied size is the size of the last mask that has been set.
Specifying bits in the mask of selective read that are not available in
the internal mask should return an error, and bits past the end of the
mask should obviously be ignored. This can only be achieved by keeping
track of the lenght of the mask.
The mask length is thus now part of the internal state that needs to be
migrated.
This patch fixes the handling of selective reads, whose size will now
match the length of the event mask, as per architecture.
While the default behaviour is to be compliant with the architecture,
when using older machine models the old broken behaviour is selected
(allowing only masks of size exactly 4), in order to be able to migrate
toward older versions.
Fixes: 67915de9f0 ("s390x/event-facility: variable-length event masks")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1519407778-23095-2-git-send-email-imbrenda@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The other event handlers (quiesce and cpu) do not define these
handlers, and this one does nothing, so it can be removed.
Signed-off-by: Nia Alarie <nia.alarie@gmail.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180306100721.19419-1-nia.alarie@gmail.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Right now it is possible to crash QEMU for s390x by providing e.g.
-numa node,nodeid=0,cpus=0-1
Problem is, that numa.c uses mc->cpu_index_to_instance_props as an
indicator whether NUMA is supported by a machine type. We don't
implement NUMA for s390x ("topology") yet. However we need
mc->cpu_index_to_instance_props for query-cpus.
So let's fix this case by also checking for mc->get_default_cpu_node_id,
which will be needed by machine_set_cpu_numa_node().
qemu-system-s390x: -numa node,nodeid=0,cpus=0-1: NUMA is not supported by
this machine-type
While at it, make s390_cpu_index_to_props() look like on other
architectures.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180227110255.20999-1-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The file name of the netboot binary is currently hard-coded to
"s390-netboot.img", without a possibility for the user to select
an alternative firmware image here. That's unfortunate, especially
since the basics are already there: The filename is a property of
the s390-ipl device. So we just have to add a check whether the user
already provided the property and only set the default if the string
is still empty. Now it is possible to select a different firmware
image with "-global s390-ipl.netboot_fw=/path/to/s390-netboot.img".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519731154-3127-1-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is possible that certain QEMU configurations may not
create an IPLB (such as when -kernel is provided). In
this case, a misleading error message will be printed
stating that the "boot menu is not supported for this
device type".
To amend this, only print this message iff boot menu=on
was provided on the commandline. Otherwise, return silently.
While we're at it, remove trailing periods from error
messages.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Message-Id: <1519760121-24594-1-git-send-email-walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If QEMU fails to load 's390-netboot.img', the guest firmware currently
loops forever and just floods the console with "Network boot device
detected" messages. The code in ipl.c apparently already tried to stop
the VM with vm_stop() in this case, but this is in vain since the run
state is later reset due to a call to vm_start() from vl.c again.
To avoid the ugly firmware loop, let's simply exit QEMU directly instead
since it just does not make sense to continue if the required firmware
image can not be loaded. While we're at it, also add the file name of
the netboot binary to the error message, so that the user has a better
hint about what is missing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519725913-24852-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
basename(3) and dirname(3) modify their argument and may return
pointers to statically allocated memory which may be overwritten by
subsequent calls.
g_path_get_basename and g_path_get_dirname have no such issues, and
therefore more preferable.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <1519888086-4207-1-git-send-email-jusual@mail.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ERxC
-----END PGP SIGNATURE-----
Merge tag 'tags/s390-ccw-bios-2018-02-26' into s390-next
Boot menu patches by Collin L. Walling
# gpg: Signature made Mon 26 Feb 2018 11:24:21 AM CET
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
* tag 'tags/s390-ccw-bios-2018-02-26':
pc-bios/s390: Rebuild the s390x firmware images with the boot menu changes
s390-ccw: interactive boot menu for scsi
s390-ccw: use zipl values when no boot menu options are present
s390-ccw: set cp_receive mask only when needed and consume pending service irqs
s390-ccw: read user input for boot index via the SCLP console
s390-ccw: print zipl boot menu
s390-ccw: read stage2 boot loader data to find menu
s390-ccw: set up interactive boot menu parameters
s390-ccw: parse and set boot menu options
s390-ccw: move auxiliary IPL data to separate location
s390-ccw: update libc
s390-ccw: refactor IPL structs
s390-ccw: refactor eckd_block_num to use CHS
s390-ccw: refactor boot map table code
From an architecture point of view, nothing can be mapped into the address
space on s390x. All there is is memory. Therefore there is also not really
an interface to communicate such information to the guest. All we can do is
specify the maximum ram address and guests can probe in that range if
memory is available and usable (TPROT).
Also memory hotplug is strange. The guest can decide at some point in
time to add / remove memory in some range. While the hypervisor can deny
to online an increment, all increments have to be predefined and there is
no way of telling the guest about a newly "hotplugged" increment. So if we
specify right now e.g.
-m 2G,slots=2,maxmem=20G
An ordinary fedora guest will happily online (hotplug) all memory,
resulting in a guest consuming 20G. So it really behaves rather like
-m 22G
There is no way to hotplug memory from the outside like on other
architectures. This is of course bad for upper management layers.
As the guest can create/delete memory regions while it is running, of
course migration support is not available and tricky to implement.
With virtualization, it is different. We might want to map something
into guest address space (e.g. fake DAX devices) and not detect it
automatically as memory. So we really want to use the maxmem and slots
parameter just like on all other architectures. Such devices will have
to expose the applicable memory range themselves. To finally be able to
provide memory hotplug to guests, we will need a new paravirtualized
interface to do that (e.g. something into the direction of virtio-mem).
This implies, that maxmem cannot be used for s390x memory hotplug
anymore and has to go. This simplifies the code quite a bit.
As migration support is not working, this change cannot really break
migration as guests without slots and maxmem don't see the SCLP
features. Also, the ram size calculation does not change.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180219174231.10874-1-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
[CH: tweaked patch description, as discussed on list]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Presently s390x is the only architecture not exposing specific
CPU information via QMP query-cpus. Upstream discussion has shown
that it could make sense to report the architecture specific CPU
state, e.g. to detect that a CPU has been stopped.
With this change the output of query-cpus will look like this on
s390:
[
{"arch": "s390", "current": true,
"props": {"core-id": 0}, "cpu-state": "operating", "CPU": 0,
"qom_path": "/machine/unattached/device[0]",
"halted": false, "thread_id": 63115},
{"arch": "s390", "current": false,
"props": {"core-id": 1}, "cpu-state": "stopped", "CPU": 1,
"qom_path": "/machine/unattached/device[1]",
"halted": true, "thread_id": 63116}
]
This change doesn't add the s390-specific data to HMP 'info cpus'.
A follow-on patch will remove all architecture specific information
from there.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1518797321-28356-2-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There's no need for this to be dynamic, make it static.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180212154903.8859-1-dgilbert@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Interactive boot menu for scsi. This follows a similar procedure
as the interactive menu for eckd dasd. An example follows:
s390x Enumerated Boot Menu.
3 entries detected. Select from index 0 to 2.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Added additional "break;" statement to avoid analyzer warnings]
Signed-off-by: Thomas Huth <thuth@redhat.com>
If no boot menu options are present, then flag the boot menu to
use the zipl options that were set in the zipl configuration file
(and stored on disk by zipl). These options are found at some
offset prior to the start of the zipl boot menu banner. The zipl
timeout value is limited to a 16-bit unsigned integer and stored
as seconds, so we take care to convert it to milliseconds in order
to conform to the rest of the boot menu functionality. This is
limited to CCW devices.
For reference, the zipl configuration file uses the following
fields in the menu section:
prompt=1 enable the boot menu
timeout=X set the timeout to X seconds
To explicitly disregard any boot menu options, then menu=off or
<bootmenu enable='no' ... /> must be specified.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Set boot menu options for an s390 guest and store them in
the iplb. These options are set via the QEMU command line
option:
-boot menu=on|off[,splash-time=X]
or via the libvirt domain xml:
<os>
<bootmenu enable='yes|no' timeout='X'/>
</os>
Where X represents some positive integer representing
milliseconds.
Any value set for loadparm will override all boot menu options.
If loadparm=PROMPT, then the menu will be enabled without a
timeout.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The s390-ccw firmware needs some information in support of the
boot process which is not available on the native machine.
Examples are the netboot firmware load address and now the
boot menu parameters.
While storing that data in unused fields of the IPL parameter block
works, that approach could create problems if the parameter block
definition should change in the future. Because then a guest could
overwrite these fields using the set IPLB diagnose.
In fact the data in question is of more global nature and not really
tied to an IPL device, so separating it is rather logical.
This commit introduces a new structure to hold firmware relevant
IPL parameters set by QEMU. The data is stored at location 204 (dec)
and can contain up to 7 32-bit words. This area is available to
programming in the z/Architecture Principles of Operation and
can thus safely be used by the firmware until the IPL has completed.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
[thuth: fixed "4 + 8 * n" comment]
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----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=DMbf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' into staging
Miscellaneous patches for 2018-02-07
# gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-misc-2018-02-07-v4:
Move include qemu/option.h from qemu-common.h to actual users
Drop superfluous includes of qapi/qmp/qjson.h
Drop superfluous includes of qapi/qmp/dispatch.h
Include qapi/qmp/qnull.h exactly where needed
Include qapi/qmp/qnum.h exactly where needed
Include qapi/qmp/qbool.h exactly where needed
Include qapi/qmp/qstring.h exactly where needed
Include qapi/qmp/qdict.h exactly where needed
Include qapi/qmp/qlist.h exactly where needed
Include qapi/qmp/qobject.h exactly where needed
qdict qlist: Make most helper macros functions
Eliminate qapi/qmp/types.h
Typedef the subtypes of QObject in qemu/typedefs.h, too
Include qmp-commands.h exactly where needed
Drop superfluous includes of qapi/qmp/qerror.h
Include qapi/error.h exactly where needed
Drop superfluous includes of qapi-types.h and test-qapi-types.h
Clean up includes
Use #include "..." for our own headers, <...> for others
vnc: use stubs for CONFIG_VNC=n dummy functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
When registering ioat, pba should be comprised of leftmost 52 bits and
rightmost 12 binary zeros, and pal should be comprised of leftmost 52
bits and right most 12 binary ones. The lower 12 bits of words 5 and 7
of the FIB are ignored by the facility. Let's fixup this.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <20180205072258.5968-4-zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The VFIO common code doesn't provide the possibility to modify a
previous mapping entry in another way than unmapping and mapping again
with new properties.
To avoid -EEXIST DMA mapping error, we introduce a GHashTable to store
S390IOTLBEntry instances in order to cache the mapped entries. When
intercepting rpcit instruction, ignore the identical mapped entries to
avoid doing map operations multiple times and do unmap and re-map
operations for the case of updating the valid entries.
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <20180205072258.5968-3-zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Current s390x PCI IOMMU code is lack of flags' checking, including:
1) protection bit
2) table length
3) table offset
4) intermediate tables' invalid bit
5) format control bit
This patch introduces a new struct named S390IOTLBEntry, and makes up
these missed checkings. At the same time, inform the guest with the
corresponding error number when the check fails. Finally, in order to
get the error number, we export s390_guest_io_table_walk().
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <20180205072258.5968-2-zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This avoids tons of conversions when handling interrupts.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We should be pretty good in shape now. Floating interrupts are working
and atomic instructions should be atomic.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
System headers should be included with <...>, our own headers with
"...". Offenders tracked down with an ugly, brittle and probably
buggy Perl script. Previous iteration was commit a9c94277f0.
Delete inclusions of "string.h" and "strings.h" instead of fixing them
to <string.h> and <strings.h>, because we always include these via
osdep.h.
Put the cleaned up system header includes first.
While there, separate #include from file comment with exactly one
blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-2-armbru@redhat.com>
Fix storage attribute migration so that it does not fail for guests
with more than a few GB of RAM.
With such guests, the index in the buffer would go out of bounds,
usually by large amounts, thus receiving -EFAULT from the kernel.
Migration itself would be successful, but storage attributes would then
not be migrated completely.
This patch fixes the out of bounds access, and thus migration of all
storage attributes when the guest have large amounts of memory.
Cc: qemu-stable@nongnu.org
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Fixes: 903fd80b03 ("s390x/migration: Storage attributes device")
Message-Id: <1516297904-18188-1-git-send-email-imbrenda@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
One fprintf(stderr, was manually converted to a
qemu_log_mask(LOG_GUEST_ERROR,
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <3f49c0ff601f27534d4536c87c00d01c233e067f.1513790495.git.alistair.francis@xilinx.com>
[CH: tweaked commit message]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Linux crashes right now if maxmem > mem is specified on the command line.
On s390x, the guest can hotplug memory itself right now - very weird -
and e.g. Fedora 27 will simply add all memory it can when booting.
So now, we have at least the same behavior on TCG and KVM.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171218224616.21030-3-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The highest cpu address is not the same as max_cpus. max_cpus
counts from 1 while the cpu address starts at 0.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <20171219082807.84494-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Remove dependency of possible_cpus on 1st CPU instance,
which decouples configuration data from CPU instances that
are created using that data.
Also later it would be used for enabling early cpu to numa node
configuration at runtime qmp_query_hotpluggable_cpus() should
provide a list of available cpu slots at early stage,
before machine_init() is called and the 1st cpu is created,
so that mgmt might be able to call it and use output to set
numa mapping.
Use MachineClass::possible_cpu_arch_ids() callback to set
cpu type info, along with the rest of possible cpu properties,
to let machine define which cpu type* will be used.
* for SPAPR it will be a spapr core type and for ARM/s390x/x86
a respective descendant of CPUClass.
Move parse_numa_opts() in vl.c after cpu_model is parsed into
cpu_type so that possible_cpu_arch_ids() would know which
cpu_type to use during layout initialization.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1515597770-268979-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
exec: housekeeping (funny since 02d0e09503)
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thanks to Laszlo Ersek for spotting the double semicolon in target/i386/kvm.c
I have trivially grepped the tree for ';;' in C files.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
KVM does not allow memory regions > KVM_MEM_MAX_NR_PAGES, basically
limiting the memory per slot to 8TB-4k. As memory slots on s390/kvm must
be a multiple of 1MB we need start a new memory region if we cross
8TB-1M.
With that (and optimistic overcommitment in the kernel) I was able to
start a 24TB guest on a 1TB system.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20171211122146.162430-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[CH: 1UL -> 1ULL in KVM_MEM_MAX_NR_PAGES; build fix on 32 bit hosts]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We are good enough to boot upstream Linux kernels / Fedora 26/27. That
should be sufficient for now.
As the QEMU CPU model is migration safe, let's add compatibility code.
Generate the feature list to reduce the chance of messing things up in the
future.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171208165529.14124-1-david@redhat.com>
[CH: squashed 's390x/cpumodel: make qemu cpu model play with "none" machine'
(20171213132407.5227-1-david@redhat.com) and 's390x/tcg: don't include z13
features in the qemu model' (20171213171512.17601-1-david@redhat.com) into
patch]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Logically, the css bridge should be attached to the machine.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With the cssids unrestricted (commit "s390x/css: unrestrict cssids") the
s390-squash-mcss machine property should not be used. Actually Libvirt
never supported this, so the expectation is that removing it should be
pretty painless. But let's play nice and deprecate it first.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171206144438.28908-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The default css 0xfe is currently restricted to virtual subchannel
devices. The hope when the decision was made was, that non-virtual
subchannel devices will come around when guest can exploit multiple
channel subsystems. Since the guests generally don't do, the pain
of the partitioned (cssid) namespace outweighs the gain.
Let us remove the corresponding restrictions (virtual devices
can be put only in 0xfe and non-virtual devices in any css except
the 0xfe -- while s390-squash-mcss then remaps everything to cssid 0).
At the same time, change our schema for generating css bus ids to put
both virtual and non-virtual devices into the default css (spilling over
into other css images, if needed). The intention is to deprecate
s390-squash-mcss. With this change devices without a specified devno
won't end up hidden to guests not supporting multiple channel subsystems,
unless this can not be avoided (default css full).
Let us also advertise the changes to the management software (so it can
tell are cssids unrestricted or restricted).
The adverse effect of getting rid of the restriction on migration should
not be too severe. Vfio-ccw devices are not live-migratable yet, and for
virtual devices using the extra freedom would only make sense with the
aforementioned guest support in place.
The auto-generated bus ids are affected by both changes. We hope to not
encounter any auto-generated bus ids in production as Libvirt is always
explicit about the bus id. Since 8ed179c937 ("s390x/css: catch section
mismatch on load", 2017-05-18) the worst that can happen because the same
device ended up having a different bus id is a cleanly failed migration.
I find it hard to reason about the impact of changed auto-generated bus
ids on migration for command line users as I don't know which rules is
such an user supposed to follow.
Another pain-point is down- or upgrade of QEMU for command line users.
The old way and the new way of doing vfio-ccw are mutually incompatible.
Libvirt is only going to support the new way, so for libvirt users, the
possible problems at QEMU downgrade are the following. If a domain
contains virtual devices placed into a css different than 0xfe the domain
will refuse to start with a QEMU not having this patch. Putting devices
into a css different that 0xfe however won't make much sense in the near
future (guest support). Libvirt will refuse to do vfio-ccw with a QEMU
not having this patch. This is business as usual.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20171206144438.28908-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When dispatching memory access to PCI BAR region, we must
look for possible subregions, used by the PCI device to map
different memory areas inside the same PCI BAR.
Since the data offset we received is calculated starting at the
region start address we need to adjust the offset for the subregion.
The data offset inside the subregion is calculated by substracting
the subregion's starting address from the data offset in the region.
The access to the MSIX region is now handled in a generic way,
we do not need the specific trap_msix() function anymore.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1512046530-17773-8-git-send-email-pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's move the memory region write from pcistg into a dedicated
function.
This allows us to prepare a later patch searching for subregions
inside of the memory region.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512046530-17773-7-git-send-email-pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's move the memory region read from pcilg into a dedicated function.
This allows us to prepare a later patch.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512046530-17773-6-git-send-email-pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Enhance the fault detection.
Fixup the precedence to check the destination path existance
before checking for the source accessibility.
Add the maxstbl entry to both the Query PCI Function Group
response and the PCIBusDevice structure.
Initialize the maxstbl to 128 per default until we get
the actual data from the hardware.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1512046530-17773-5-git-send-email-pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Enhance the fault detection, correction of the fault reporting.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1512046530-17773-4-git-send-email-pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Enhance the fault detection, correction of the fault reporting.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1512046530-17773-3-git-send-email-pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There are two places where the same endianness conversion
is done.
Let's factor this out into a static function.
Note that the conversion must always be done for data in a register:
The S390 BE guest converted date to le before issuing the instruction.
After interception in a BE host:
ZPCI VFIO using pwrite must make the conversion back for the BE kernel.
Kernel will do BE to le translation when loading the register for the
real instruction.
After interception in a le host:
TCG stores a BE register in le, swapping bytes.
But since the data in the register was already le it is now BE
ZPCI VFIO must convert it to le before writing to the PCI memory.
In both cases ZPCI VFIO must swap the bytes from the register.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1512046530-17773-2-git-send-email-pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390_cpu_virt_mem_rw() must always return, so callers can react on
an exception (e.g. see ioinst_handle_stcrw()).
However, for TCG we always have to exit the cpu loop (and restore the
cpu state before that) if we injected a program interrupt. So let's
introduce and use s390_cpu_virt_mem_handle_exc() in code that is not
purely KVM.
Directly pass the retaddr we already have available in these functions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Once we wire up TCG, we will need the retaddr to correctly inject
program interrupts. As we want to get rid of the function
program_interrupt(), convert PCI code too.
For KVM, we can simply use RA_IGNORED.
Convert program_interrupt() to s390_program_interrupt() directly, making
use of the passed address.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is broken and not even wired up. We'll add a new handler soon, but
that will live somewhere else.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The bus pointer in PCIDevice is basically redundant with QOM information.
It's always initialized to the qdev_get_parent_bus(), the only difference
is the type.
Therefore this patch eliminates the field, instead creating a pci_get_bus()
helper to do the type mangling to derive it conveniently from the QOM
Device object underneath.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
A fair proportion of the users of pci_bus_num() want to get the bus
number on a specific device, so first have to look up the bus from the
device then call it. This adds a helper to do that (since we're going
to make looking up the bus slightly more verbose).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
pci_bus_init(), pci_bus_new_inplace(), pci_bus_new() and pci_register_bus()
are misleadingly named. They're not used for initializing *any* PCI bus,
but only for a root PCI bus.
Non-root buses - i.e. ones under a logical PCI to PCI bridge - are instead
created with a direct qbus_create_inplace() (see pci_bridge_initfn()).
This patch renames the functions to make it clear they're only used for
a root bus.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We no longer support the old s390 transport, neither does the newest
Linux kernel. Remove it from the linux header script as well as the
s390x virtio code. We still should handle the VIRTIO_NOTIFY hypercall,
to tolerate early printk on older guest kernels without an sclp console.
We continue to ignore these events.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20171115154223.109991-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently, to enable a pci device in the guest, the user has to issue
echo 1 > /sys/bus/pci/slots/00000000/power. This is not what people
expect. On an LPAR, the user can put a PCI device in configured or
deconfigured state via IOCDS. The "start in deconfigured state" can be
used for "sharing" a pci function across LPARs. This is not what we are
going to use in KVM, so always start configured.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20171107175455.73793-2-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Starting a guest with
<os>
<type arch='s390x' machine='s390-ccw-virtio-2.9'>hvm</type>
</os>
<cpu mode='host-model'/>
on an IBM z14 results in
"qemu-system-s390x: Some features requested in the CPU model are not
available in the configuration: gs"
This is because guarded storage is fenced for compat machines that did
not have guarded storage support. While this prevents future migration
abort (by not starting the guest at all), not being able to start a
"host-model" guest is very much unexpected. As it turns out, even if we
would modify libvirt to not expand the cpu model to contain "gs" for
compat machines, it cannot guarantee that a migration will succeed. For
example if the kernel changes its features (or the user has nested=1 on
one host but not on the other) the migration will fail nevertheless. So
instead of fencing "gs" for machines <= 2.9 lets allow it for all
machine types that support the CPU model. This will make "host-model"
runnable all the time, while relying on the CPU model to reject invalid
migration attempts. We also need to change the migration for guarded
storage.
Additional discussions about host-model are still pending but are out
of scope of this patch.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Simplify the error handling of the MSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-8-pasic@linux.vnet.ibm.com>
[CH: fix return code for fctl != 0]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the HSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-7-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the CSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-6-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the XSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-5-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the SSCH and RSCH handler avoiding
arbitrary and cryptic error codes being used to tell how the instruction
is supposed to end. Let the code detecting the condition tell how it's
to be handled in a less ambiguous way. It's best to handle SSCH and RSCH
in one go as the emulation of the two shares a lot of code.
For passthrough this change isn't pure refactoring, but changes the way
kernel reported EFAULT is handled. After clarifying the kernel interface
we decided that EFAULT shall be mapped to unit exception. Same goes for
unexpected error codes and absence of required ORB flags.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-4-pasic@linux.vnet.ibm.com>
Tested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
[CH: cosmetic changes]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390-virtio-ccw.c is the sole user of s390x_new_cpu(),
so move this helper there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1508253203-119237-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The architecture supports masks of variable length for sclp write
event mask. We currently only support 4 byte event masks, as that
is what Linux uses.
Let's extend this to the maximum mask length supported by the
architecture and return 0 to the guest for the mask bits we don't
support in core.
Initial patch by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <1507729193-9747-1-git-send-email-jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Wire up the virtio-input HID devices (keyboard, mouse, tablet)
for the CCW bus. The virtio-input is a virtio-1 device,
so disable legacy revision 0.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <6a8ea4c503ee32c2ca7fa608b5f2f547009be8ee.1507557166.git.alifm@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Nothing hindering us anymore from unlocking the restart code (used for
NMI).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-29-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This effectively enables experimental SMP support. Floating interrupts are
still a mess, so allow it but print a big warning. There also seems
to be a problem with CPU hotplug (after the main loop started).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-27-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[CH: changed insn-data.def as pointed out by Richard]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to use the same code base for TCG, so let's cleanly factor it
out.
The sigp mutex is currently not really needed, as everything is
protected by the iothread mutex. But this could change later, so leave
it in place and initialize it properly from common code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Calling do_subchannel_work with no function control flags set in SCSW is
a programming error. Currently we handle this differently in
do_subchannel_work_virtual and do_subchannel_work_passthrough. Let's be
consistent and guard with a common assert against this programming error.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171004154144.88995-2-pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The "sclpquiesce" device is just an internal device that should not be
created by the user directly. Though it currently does not seem to cause
any obvious trouble when the user instantiates an additional device, let's
better mark it with user_creatable = false to avoid unexpected behavior,
e.g. because the quiesce notifier gets registered multiple times.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1507193105-15627-1-git-send-email-thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
A TYPE_SCLP_CPU_HOTPLUG device for handling cpu hotplug events
is already created by the sclp event facility. Adding a second
TYPE_SCLP_CPU_HOTPLUG device via -device sclp-cpu-hotplug creates
an ambiguity in raise_irq_cpu_hotplug(), leading to a crash once
a cpu is hotplugged.
To fix this, disallow creating a sclp-cpu-hotplug device manually.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The "sclp" device is just an internal device that can not be instantiated
by the users. If they try to use it, they only get a simple error message:
$ qemu-system-s390x -nographic -device sclp
qemu-system-s390x: Option '-device s390-sclp-event-facility' cannot be
handled by this machine
Since sclp_init() tries to create a TYPE_SCLP_EVENT_FACILITY which is
a non-pluggable sysbus device, there is really no way that the "sclp"
device can be used by the user, so let's set the user_creatable = false
accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1507125199-22562-1-git-send-email-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If we fail to set a proper TOD clock on the target system, this can
already result in some problematic cases. We print several warn messages
on source and target in that case.
If kvm fails to set a nonzero epoch index, then we must ultimately fail
the migration as this will result in a giant time leap backwards. This
patch lets the migration fail if we can not set the guest time on the
target.
On failure the guest will resume normally on the original host machine.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split failure change from epoch index change, minor fixups]
Message-Id: <20171004105751.24655-3-borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Commit e996583eb3 ("s390x/css: activate ChannelSubSys migration",
2017-07-11) was supposed to enable css migration for virtio-ccw
machines starting 2.10, but it ended up effectively enabling it
only for 2.10 as the registration of the appropriate VMStateDescription
happens in ccw_machine_2_10_instance_options which does not get
called for machines more recent than 2_10.
Let us move the corresponding chunk of code (which conditionally enables
the migration based on the value of the corresponding class property) to
ccw_init, which is called for each virtio-ccw machine instance.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20171004110109.16525-1-pasic@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Will be handy in the future.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's move it into the machine, so we trigger the IRQ after setting
ms->possible_cpus (which SCLP uses to construct the list of
online CPUs).
This also fixes a problem reported by Thomas Huth, whereby qemu can be
crashed using the none machine
qemu-s390x-softmmu -M none -monitor stdio
-> device_add qemu-s390-cpu
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let us convert the 3270 code so it uses the recently introduced
CcwDataStream abstraction instead of blindly assuming direct data access.
This patch does not change behavior beyond introducing IDA support: for
direct data access CCWs everything stays as-is. (If there are bugs, they
are also preserved).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170920172314.102710-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This reverts commit d32bd032d8.
Turns out that old QEMUs always created a pci host bridge
and for many CPU models the migration from old QEMUs to new
QEMUs will fail with
qemu-system-s390x: Unknown savevm section or instance 'PCIBUS' 0
qemu-system-s390x: load of migration failed: Invalid argument
As a quick fix we will revert the commit and always create the
pci host bridge.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[fixed revert to keep the comment fixup, added a comment in the code]
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Message-Id: <20170928131831.81393-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's add indirect data addressing support for our virtual channel
subsystem. This implementation does not bother with any kind of
prefetching. We simply step through the IDAL on demand.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-6-pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The architecture mandates the addresses to be accessed on the first
indirection level (that is, the data addresses without IDA, and the
(M)IDAW addresses with (M)IDA) to be checked against an CCW format
dependent limit maximum address. If a violation is detected, the storage
access is not to be performed and a channel program check needs to be
generated. As of today, we fail to do this check.
Let us stick even closer to the architecture specification.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-5-pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Replace direct access which implicitly assumes no IDA
or MIDA with the new ccw data stream interface which should
cope with these transparently in the future.
Note that checking the return code for ccw_dstream_* will be
done in a follow-on patch.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-4-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Replace direct access which implicitly assumes no IDA
or MIDA with the new ccw data stream interface which should
cope with these transparently in the future.
Note that checking the return code for ccw_dstream_* will be
done in a follow-on patch.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a preparation for introducing handling for indirect data
addressing and modified indirect data addressing (CCW). Here we introduce
an interface which should make the addressing scheme transparent for the
client code. Here we implement only the basic scheme (no IDA or MIDA).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Define default CPU type in generic way in machine class_init
and let common machine code handle cpu_model parsing.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <1505998749-269631-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wire up the virtio-gpu device for the CCW bus. The virtio-gpu
is a virtio-1 device, so disable revision 0.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <6c53f939cf2d64b66d2a6878b29c9bf3820f3d5b.1505485574.git.alifm@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We have two stale comments suggesting one should think about virtio
config space endianness a bit longer. We have just done that, and came to
the conclusion we are fine as is: it's the responsibility of the virtio
device and not of the transport (and that is how it works now). Putting
the responsibility into the transport isn't even possible, because the
transport would have to know about the config space layout of each
device.
Let us remove the stale comments.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20170914105535.47941-1-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is the first step to allow hot plugging of CPUs in a non-sequential
order. If a cpu is available ("plugged") can directly be decided by
looking at the cpu state pointer.
This makes sure, that really only cpus attached to the machine are
reported.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-22-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that there is only one user of cpu_s390x_create() left, make cpu
creation look like on x86.
- Perform the model/properties split and checks in s390_init_cpus()
- Parse features only once without having to remember if already parsed
- Pass only the typename to s390x_new_cpu()
- Use the typename of an existing CPU for hotplug via cpu-add
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-21-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that we have possible_cpus, we can get rid of the global variable
and rewrite s390_cpu_addr2state() to use it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-20-david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CPU hotplug is only possible on a per core basis on s390x. So let's
add possible_cpus and wire everything up properly.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-19-david@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
device_del on a CPU will currently do nothing. Let's emit an error
telling that this is will currently not work (there is no architecture
support on s390x). Error message copied from ppc.
(qemu) device_del cpu1
device_del cpu1
CPU hot unplug not supported on this machine
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Some time ago we discussed that using "id" as property name is not the
right thing to do, as it is a reserved property for other devices and
will not work with device_add.
Switch to the term "core-id" instead, and use it as an equivalent to
"CPU address" mentioned in the PoP. There is no such thing as cpu number,
so rename env.cpu_num to env.core_id. We use "core-id" as this is the
common term to use for device_add later on (x86 and ppc).
We can get rid of cpu->id now. Keep cpu_index and env->core_id in sync.
cpu_index was already implicitly used by e.g. cpu_exists(), so keeping
both in sync seems to be the right thing to do.
cpu_index will now no longer automatically get set via
cpu_exec_realizefn(). For now, we were lucky that both implicitly stayed
in sync.
Our new cpu property "core-id" can be a static property. Range checks can
be avoided by using the correct type and the "setting after realized"
check is done implicitly.
device_add will later need the reserved "id" property. Hotplugging a CPU
on s390x will then be: "device_add host-s390-cpu,id=cpu2,core-id=2".
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Specifying more than 1 CPU (e.g. -smp 5) leads to SIGP errors (the
guest tries to bring these CPUs up but fails), because we don't support
multiple CPUs on s390x under TCG.
Let's bail out if more than 1 is specified, so we don't raise people's
hope.
Tested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-12-david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implemented in hw/s390x/s390-virtio-hcall.c, so let's move it to the
right header file.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The only interface left, so let's properly rename it.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is a leftover from the days where we had still the !ccw virtio
machine. As this one is long gone, let's move everything to
s390-virtio-ccw.c.
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The case in question actually never happens. Let us get rid of the dead
code.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170908152446.14606-4-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Back then in the time of df1fe5bb49 ("s390: Virtual channel subsystem
support.", 2013-01-24) -EIO used to map to a channel-program check (via
the default label of the switch statement). Then 2dc95b4cac
("s390x/3270: 3270 data stream handling", 2016-04-01) came along
and that changed dramatically.
Let us roll back this undesired side effect, and go back to
channel-program check.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes: 2dc95b4cac "s390x/3270: 3270 data stream handling"
Message-Id: <20170908152446.14606-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The architecture says that channel-data check is indicating that
an uncorrected storage (memory) error has been detected in regard
to the data residing in main storage (memory) that is currently
used for an I/O operation. The described detection is done using
the CBC technology.
The ccw interpretation code is however generating a channel-data check
effectively when the (device specific) ccw_cb returns -EFAULT. In case
of virtio-ccw devices this happens when mapping memory fails, or when a
NULL pointer is encountered. So this behavior is not architecture
conform.
Furthermore the best fit for these situations (null pointer, mapping a
piece of guest memory fails) from architectural perspective the condition
described as the channel subsystem refers to a location that is not
available, which when encountered shall result in a channel-program
check.
To fix this, all we have to do is to get rid of the switch case matching
-EFAULT: the default is generating a channel-program check.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170908152446.14606-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's introduce iommu replay callback for s390 pci iommu memory region.
Currently we don't need any dma mapping replay. So let it return
directly. This implementation will avoid meaningless loops calling
translation callback.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1504606380-49341-4-git-send-email-zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
PCIDevice pointer has been a parameter of kvm_arch_fixup_msi_route().
So we don't need to store zpci idx in msix message data to find out the
specific zpci device. Instead, we could use pci device id to find its
corresponding zpci device.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1504606380-49341-2-git-send-email-zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The function ioinst_handle_xsch is presenting cc 2 when it's supposed to
present cc 1 and the other way around, because css_do_xsch has the error
codes mixed up. Because cc 1 has precedence over cc 2 we also have to
swap the two checks.
Let us fix this.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reported-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20170831121828.85885-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Tidy up some of the warn_report() messages after having converted them
to use warn_report().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using these commands:
find ./* -type f -exec sed -i \
'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
Indentation fixed up manually afterwards.
Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.
The #include lines were manually updated to allow the code to compile.
Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function trap_msix() is to check if pcistg instruction would access
msix table entries. The correct boundary condition should be
[table_offset, table_offset+entries*entry_size). But the current
condition calculated misses the last entry. So let's fixup it.
Acked-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1503907487-2764-2-git-send-email-zyimin@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The storage attribute devices are only meant to be instantiated one
time, internally. They can not be used by the user, so mark them with
user_creatable = false.
Suggested-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1503576029-24264-1-git-send-email-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's do it just like the other architectures. Introduce kvm-stub.c
for stubs and kvm_s390x.h for the declarations.
Change license to GPL2+ and keep copyright notice.
As we are dropping the sysemu/kvm.h include from cpu.h, fix up includes.
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's just introduce an helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The functions are not used in target/s390x/ so a header in hw/s390x/
is a better place.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-9-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390-stattrib.c needs definition of TARGET_PAGE_SIZE, solve it via cpu.h.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now we can drop inclusion of "sysemu/kvm.h" from "s390-virtio.c".
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-7-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's avoid any KVM stuff in s390-virtio-ccw.c. This parameter is simply
ignored.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-6-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
No need for kvm_enabled() as this function is only called from KVM and
there is no reason why it shouldn't be allowed for tcg. It is simply not
available under tcg.
Also, there is no need to check for the machine type anymore. Just like
ri_enabled(), we can directly use the stored flag, which results in
"true" for the "none" machine.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-5-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Only used in KVM and there is no reason why it shouldn't be allowed for
tcg - it is simply not available.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Not needed at that point.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
QEMU currently aborts if the user tries to create a skey device:
$ s390x-softmmu/qemu-system-s390x -nographic -device s390-skeys-qemu
qemu-system-s390x: hw/s390x/s390-skeys.c:30: s390_get_skeys_device:
Assertion `ss' failed.
Aborted (core dumped)
The storage key devices are only meant to be instantiated one time,
internally. They can not be used by the user, so mark them with
user_creatable = false.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1503569328-22197-1-git-send-email-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If we do not provide zpci, pci reconfiguration via sclp is not available
either. I/O adapter configuration, however, should always be present.
Rename the values that refer to I/O adapter configuration (instead of only
pci) to make things clearer.
Move length checking of the sccb for I/O adapter configuration into the
common sclp code (out of the pci code). This also fixes an issue that
the pci code would refer to a field in the sccb before checking whether
it was actually long enough.
Check for the adapter type in the sccb and return unrecognized adapter
type if the guest tries to issue I/O adapter configure/deconfigure for
a type other than pci or for pci if the zpci facility is not provided.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
