Commit 8d93297 introduced a bug whereby non-inbuilt NICs are realized before
setting the default MAC address causing an assert. Switch NIC creation
over from pci_create_simple() to pci_create() which works exactly the
same except omitting the realize as originally intended.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
This patch updates the sun4u model to being much closer to a real Ultra 5
by moving devices behind the 2 simba PCI bridges (A and B) as found on real
hardware.
The most noticeable change introduced by this patchset is that in-built devices
are no longer attached to the PCI root bus, but instead behind PCI bridge A.
Along with this the interrupt routing is updated accordingly to match the
official documentation.
Since the existing code currently bypasses the PCI bridge interrupt
swizzling, the interrupt mapping functions are reorganised so that
pci_pbm_map_irq() is used by the PCI bridges and pci_apb_map_irq() is
used by the PCI host bridge.
Behind the sabre PCI host bridge, the PCI IO space now needs to be
split into two separate halves at 0x8000000. Therefore we also setup a new
PCI IO space region of increased size on the PCI host bridge and enable
32-bit PCI IO accesses to allow IO accesses to reach devices behind PCI
bridge B correctly.
As part of this change we also combine the onboard sunhme NIC and the ebus
into a single multi-function device as done on a real Ultra 5. For other
NICs the existing behaviour is preserved, i.e. we initialise them and
place them into the next free slot on PCI bus B.
Finally we mark the physically unavailable slots (plus slot 0 in busA) as
reserved to ensure that users can't plug devices into non-existent slots
which will break interrupt routing.
Note: since this commit changes PCI topology and interrupt routing, an
updated openbios-sparc64 binary is included with this commit containing the
associated changes to maintain bisectability.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Logical block size of a SCSI disk should never be larger than
physical block size. From an ATA/SCSI perspective, it makes no sense
to have the logical block size greater than the physical block size,
and it cannot even be effectively expressed in the command set. The
whole point of adding the physical block size to the ATA/SCSI command
set was to communicate a desire for a larger block size (than logical),
while maintaining backwards compatibility with legacy 512 byte block
size.
When setting logical_block_size > physical_block_size, QEMU cannot express
it in READ CAPACITY(16) output, and all it can do is set the physical
block exponent to 0 (i.e. logical_block_size == physical_block_size).
Reporting the error properly, however, is better.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <1508185024-5840-1-git-send-email-mark.kanda@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DEVICE_DEL is currently emitted when a Device is unparented, as
opposed to when it is finalized. The main design motivation for this
seems to be that after unparent()/unrealize(), the Device is no
longer visible to the guest, and thus the operation is complete
from the perspective of management.
However, there are cases where remaining host-side cleanup is also
pertinent to management. The is generally handled by treating these
resources as aspects of the "backend", which can be managed via
separate interfaces/events, such as blockdev_add/del, netdev_add/del,
object_add/del, etc, but some devices do not have this level of
compartmentalization, namely vfio-pci, and possibly to lend themselves
well to it.
In the case of vfio-pci, the "backend" cleanup happens as part of
the finalization of the vfio-pci device itself, in particular the
cleanup of the VFIO group FD. Failing to wait for this cleanup can
result in tools like libvirt attempting to rebind the device to
the host while it's still being used by VFIO, which can result in
host crashes or other misbehavior depending on the host driver.
Deferring DEVICE_DEL still affords us the ability to manage backends
explicitly, while also addressing cases like vfio-pci's, so we
implement that approach here.
An alternative proposal involving having VFIO emit a separate event
to denote completion of host-side cleanup was discussed, but the
prevailing opinion seems to be that it is not worth the added
complexity, and leaves the issue open for other Device implementations
to solve in the future.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20171016222315.407-4-mdroth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit abed886ec6.
This patch originally addressed an issue where a DEVICE_DELETED
event could be emitted (in device_unparent()) before a Device's
QemuOpts were cleaned up (in device_finalize()), leading to a
"duplicate ID" error if management attempted to immediately add
a device with the same ID in response to the DEVICE_DELETED event.
An alternative will be implemented in a subsequent patch where we
defer the DEVICE_DELETED event until device_finalize(), which would
also prevent the race, so we revert the original fix in preparation.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20171016222315.407-3-mdroth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
device_unparent(dev, ...) is called when a device is unparented,
either directly, or as a result of a parent device being
finalized, and handles some final cleanup for the device. Part
of this includes emiting a DEVICE_DELETED QMP event to notify
management, which includes the device's path in the composition
tree as provided by object_get_canonical_path().
object_get_canonical_path() assumes the device is still connected
to the machine/root container, and will assert otherwise, but
in some situations this isn't the case:
If the parent is finalized as a result of object_unparent(), it
will still be attached to the composition tree at the time any
children are unparented as a result of that same call to
object_unparent(). However, in some cases, object_unparent()
will complete without finalizing the parent device, due to
lingering references that won't be released till some time later.
One such example is if the parent has MemoryRegion children (which
take a ref on their parent), who in turn have AddressSpace's (which
take a ref on their regions), since those AddressSpaces get cleaned
up asynchronously by the RCU thread.
In this case qdev:device_unparent() may be called for a child Device
that no longer has a path to the root/machine container, causing
object_get_canonical_path() to assert.
Fix this by storing the canonical path during realize() so the
information will still be available for device_unparent() in such
cases.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20171016222315.407-2-mdroth@linux.vnet.ibm.com>
[Clear dev->canonical_path at the post_realize_fail label, which is
cleaner. Suggested by David Gibson. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here's the currently accumulated set of ppc patches for qemu.
* The biggest set here is the ppc parts of Igor Mammedov's cleanups
to cpu model handling
* The above also includes a generic patches which are required as
prerequisites for the ppc parts. They don't seem to have been
merged by Eduardo yet, so I hope they're ok to include here.
* Apart from that it's basically just assorted bug fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=aRCf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.11-20171017' into staging
ppc patch queue 2017-10-17
Here's the currently accumulated set of ppc patches for qemu.
* The biggest set here is the ppc parts of Igor Mammedov's cleanups
to cpu model handling
* The above also includes a generic patches which are required as
prerequisites for the ppc parts. They don't seem to have been
merged by Eduardo yet, so I hope they're ok to include here.
* Apart from that it's basically just assorted bug fixes and cleanups
# gpg: Signature made Tue 17 Oct 2017 05:20:03 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.11-20171017: (34 commits)
spapr_cpu_core: rewrite machine type sanity check
spapr_pci: fail gracefully with non-pseries machine types
spapr: Correct RAM size calculation for HPT resizing
ppc: pnv: consolidate type definitions and batch register them
ppc: pnv: drop PnvChipClass::cpu_model field
ppc: pnv: define core types statically
ppc: pnv: drop PnvCoreClass::cpu_oc field
ppc: pnv: normalize core/chip type names
ppc: pnv: use generic cpu_model parsing
ppc: spapr: use generic cpu_model parsing
ppc: move ppc_cpu_lookup_alias() before its first user
ppc: spapr: use cpu model names as tcg defaults instead of aliases
ppc: spapr: register 'host' core type along with the rest of core types
ppc: spapr: use cpu type name directly
ppc: spapr: define core types statically
ppc: move '-cpu foo,compat=xxx' parsing into ppc_cpu_parse_featurestr()
ppc: spapr: replace ppc_cpu_parse_features() with cpu_parse_cpu_model()
ppc: 40p/prep: replace cpu_model with cpu_type
ppc: virtex-ml507: replace cpu_model with cpu_type
ppc: replace cpu_model with cpu_type on ref405ep,taihu boards
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAlnky2kACgkQAvw66wEB28KdKgCfcvZ3KbbQFb7f71VTULAwkMgM
sK4AoJmbDsgBbFd+JHF329PPP2tsRovn
=RKJn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
This fixes a potential data leak to the guest.
# gpg: Signature made Mon 16 Oct 2017 16:08:25 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9pfs: use g_malloc0 to allocate space for xattr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move dst calculation into the loop, so we apply the mask on each
interation and will not overflow vga memory.
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Reported-by: Niu Guoxiang <niuguoxiang@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171011084314.21752-1-kraxel@redhat.com
Commit "3d90c62548 vga: stop passing pointers to vga_draw_line*
functions" is incomplete. It doesn't handle the case that the vga
rendering code tries to create a shared surface, i.e. a pixman image
backed by vga video memory. That can not work in case the guest display
wraps from end of video memory to the start. So force shadowing in that
case. Also adjust the snapshot region calculation.
Can trigger with cirrus only, when programming vbe modes using the bochs
api (stdvga, also qxl and virtio-vga in vga compat mode) wrap arounds
can't happen.
Fixes: CVE-2017-13672
Fixes: 3d90c62548
Cc: P J P <ppandit@redhat.com>
Reported-by: David Buchanan <d@vidbuchanan.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010141323.14049-3-kraxel@redhat.com
This makes the code easier to understand and it is consistent with what
we already do for PHBs.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently crashes when the user tries to add an spapr-pci-host-bridge
on a non-pseries machine:
$ qemu-system-ppc64 -M ppce500 -device spapr-pci-host-bridge,index=1
hw/ppc/spapr_pci.c:1535:spapr_phb_realize:
Object 0x1003dacae60 is not an instance of type spapr-machine
Aborted (core dumped)
The same thing happens with the deprecated but still available child type
spapr-pci-vfio-host-bridge.
Fix both by checking the machine type with object_dynamic_cast().
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In order to prevent the guest from forcing the allocation of large amounts
of qemu memory (or host kernel memory, in the case of KVM HV), we limit
the size of Hashed Page Table (HPT) it is allowed to allocated, based on
its RAM size.
However, the current calculation is not correct: it only adds up the size
of plugged memory, ignoring the base memory size. This patch corrects it.
While we're there, use get_plugged_memory_size() instead of directly
calling pc_existing_dimms_capacity(). The only difference is that it
will abort on failure, which is right: a failure here indicates something
wrong within qemu.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Use a new DEFINE_TYPES() helper to simplify type registration
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
deduce core type directly from chip type instead of
maintaining type mapping in PnvChipClass::cpu_model.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
pnv core type definition doesn't have any fields that
require it to be defined at runtime. So replace code
that fills in TypeInfo at runtime with static TypeInfo
array that does the same at complie time.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
deduce cpu type directly from core type instead of
maintaining type mapping in PnvCoreClass::cpu_oc and doing
extra cpu_model parsing in pnv_core_class_init()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
typically for cpus/core type names following convention is used
new_type_prefix-superclass_typename
make PNV core/chip to follow common convention.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
use common cpu_model prasing in vl.c and set default cpu_model
using generic MachineClass::default_cpu_type.
Beside of switching to generic infrastructure it solves several
issues.
* ppc_cpu_class_by_name() is used to deal with lower/upper case
and alias translations into actual cpu type, which fixes
'-M powernv -cpu power8' and '-M powernv -cpu power9_v1.0'
usecases which error out with:
'invalid CPU model 'FOO' for powernv machine'
* allows to switch to lower-case typenames in pnv chip/core name
(by convention typnames should be lower-case)
* replace aliased names /power8, power9, .../ with exact cpu model
names (i.e. typenames should be stable but aliases might decide to
point to other cpu model withi family or changed by kvm). It will
also help to simplify pnv_chip/core code and get rid of dependency
on cpu_model parsing.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[dwg: Updated to make DD2.0 as default POWER9 chip]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
use generic cpu_model parsing introduced by
(6063d4c0f vl.c: convert cpu_model to cpu type and set of global properties before machine_init())
it allows to:
* replace sPAPRMachineClass::tcg_default_cpu with
MachineClass::default_cpu_type
* drop cpu_parse_cpu_model() from hw/ppc/spapr.c and reuse
one in vl.c
* simplify spapr_get_cpu_core_type() by removing
not needed anymore recurrsion since alias look up
happens earlier at vl.c and spapr_get_cpu_core_type()
works only with resulted from that cpu type.
* spapr no more needs to parse/depend on being phased out
MachineState::cpu_model, all tha parsing done by generic
code and target specific callback.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
[dwg: Correct minor compile error]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
consolidate 'host' core type registration by moving it from
KVM specific code into spapr_cpu_core.c, similar like it's
done in x86 target.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
replace sPAPRCPUCoreClass::cpu_class with cpu type name
since it were needed just to get that at points it were
accessed.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr core type definition doesn't have any fields that
require it to be defined at runtime. So replace code
that fills in TypeInfo at runtime with static TypeInfo
array that does the same at complie time.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
there is a dedicated callback CPUClass::parse_features
which purpose is to convert -cpu features into a set of
global properties AND deal with compat/legacy features
that couldn't be directly translated into CPU's properties.
Create ppc variant of it (ppc_cpu_parse_featurestr) and
move 'compat=val' handling from spapr_cpu_core.c into it.
That removes a dependency of board/core code on cpu_model
parsing and would let to reuse common -cpu parsing
introduced by 6063d4c0
Set "max-cpu-compat" property only if it exists, in practice
it should limit 'compat' hack to spapr machine and allow
to avoid including machine/spapr headers in target/ppc/cpu.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc_cpu_parse_features() is doing practically the same thing as
generic cpu_parse_cpu_model(). So remove duplicated impl. and
reuse generic one.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
LMB removal is completed only when the spapr_lmb_release callback
is called after all DRCs of the dimm are detached. During this
time, it is possible that a unplug request for the same dimm
arrives, trying to detach DRCs that were detached by the guest
in the first unplug_request.
BQL doesn't help in this case - the lock will prevent any concurrent
removal from happening until the end of spapr_memory_unplug_request
only. What happens is that the second unplug_request ends up calling
spapr_drc_detach in a DRC that were detached already, causing an
assert error in spapr_drc_detach (e.g
https://bugs.launchpad.net/qemu/+bug/1718118).
spapr_lmb_release uses a structure called sPAPRDIMMState, stored in the
spapr->pending_dimm_unplugs QTAIL, to track how many LMB DRCs are left
to be detached by the guest. When there are no more DRCs left, this
structure is deleted and the pc-dimm unplug handler is called to
finish the process.
This patch reuses the sPAPRDIMMState to allow unplug_request to know
if there is an ongoing unplug process for a given dimm, aborting the
unplug request in this case, by doing the following changes:
- in spapr_lmb_release callback, move the dimm state removal to the
end, after pc-dimm unplug handler. With this change we can check for
the existence of the dimm state to see if the unplug process is
done.
- use spapr_pending_dimm_unplugs_find in spapr_memory_unplug_request
to check if the dimm state exists. If positive, there is an unplug
operation already in progress for this dimm, meaning that we should
abort it and warn the user about it.
Fixes: https://bugs.launchpad.net/qemu/+bug/1718118
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment the only POWER9 model which is listed in qemu is v1.0 (aka
"DD1"). This is a very early (read, buggy) version which will never be
released to the public - it was included in qemu only for the convenience
of those doing bringup on the early silicon. For bonus points, we actually
had its PVR incorrect in the table (0x004e0000 instead of 0x004e0100). We
also never actually implemented the differences in behaviour (read, bugs)
that marked DD1 in qemu.
Now that we know the PVR for the substantially better v2.0 (DD2) chip,
include it and make it the default POWER9 in qemu. For the time being we
leave the DD1 definition in place for the poor souls (read, me) who still
need to work with DD1 hardware.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The CAS buffer is provided by SLOF. A broken SLOF could pass a silly
size: either smaller than the diff header, in which case the current
code will try to allocate 16 Exabytes of memory and g_malloc0() will
abort, or bigger than the maximum memory provisioned for SLOF (ie,
40 Megabytes), which doesn't make sense. Both cases indicate that
SLOF has a bug.
Let's print out an explicit error message and exit since rebooting as
we do with other errors would only result in a reset loop.
Signed-off-by: Greg Kurz <groug@kaod.org>
[dwg: Fix format specifier that broke 32-bit builds]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The offset of the root node is guaranteed to be 0.
This doesn't fix anything, it's just trivial cleanup of the two
remaining places where this was done under hw/ppc.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 4f7265f "ppc/ide/macio: Add missing registers" added two extra macio
registers but forgot to add them to the corresponding VMStateDescription.
The version number is bumped accordingly, although this will have little
effect given that the Mac machines are practically unmigratable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A bunch of fixes all over the place.
A new vmcore device - the user interface around it is still somewhat
controversial, but I feel most of the code is fine, suggestions can be
addressed by adding patches on top.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ4s+/AAoJECgfDbjSjVRpHQMH/2fVQ9b70BvG4KFpzwhIT3dg
eyglA9NsXTVINcGu598ZoBD+1OF1N23o6SpcOd56nyLnBwAWiwfnOk05Ncx7WQ4g
VZoxWcpzrG6SO1Hczg4y1EfT1+cIhlaf3a0kuVGmDTb/zPdMwAqAzw0rjvY5uIjY
wixOWXfJ34Tq8PNrFIaWECuI5Php+QVTNnvvKQTzgWn1iksj1a4pdZb6/Jd5SLFY
6hjtfZccDSsqeOduoJMJGJ2pHLbZEaqpxzPBM/AVW0BdWTpeOPI12SazZwUfEcLe
uHoIASknekX9E6U57l0syRHlvBTnaZkJ0YIw4e3Z08qPBYOL8eFr+M8kjHaIIxc=
=yEmz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: fixes, features
A bunch of fixes all over the place.
A new vmcore device - the user interface around it is still somewhat
controversial, but I feel most of the code is fine, suggestions can be
addressed by adding patches on top.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 15 Oct 2017 04:02:23 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (26 commits)
tests/pxe: Test more NICs when running in SPEED=slow mode
pc: remove useless hot_add_cpu initialisation
isapc: Remove unnecessary migration compatibility code
virtio-pci: Replace modern_as with direct access to modern_bar
virtio: fix descriptor counting in virtqueue_pop
hw/gen_pcie_root_port: make IO RO 0 on IO disabled
pci: Validate interfaces on base_class_init
xen/pt: Mark TYPE_XEN_PT_DEVICE as hybrid
pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices
pci: Add INTERFACE_PCIE_DEVICE to all PCIe devices
pci: Add interface names to hybrid PCI devices
pci: conventional-pci-device and pci-express-device interfaces
PCI: PCIe access should always be little endian
virtio/pci/migration: Convert to VMState
hw/pci-bridge/pcie_pci_bridge: properly handle MSI unavailability case
pci: allow 32-bit PCI IO accesses to pass through the PCI bridge
virtio/vhost: reset dev->log after syncing
MAINTAINERS: add Dump maintainers
scripts/dump-guest-memory.py: add vmcoreinfo
kdump: set vmcoreinfo location
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add trace events to the PCH watchdog timer, it can be useful to see how
the guest is using it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1507816448-86665-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
9p back-end first queries the size of an extended attribute,
allocates space for it via g_malloc() and then retrieves its
value into allocated buffer. Race between querying attribute
size and retrieving its could lead to memory bytes disclosure.
Use g_malloc0() to avoid it.
Reported-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
[thuth: Remove "qemu:" prefix from strings]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since 4458fb3a79 (pc: Eliminate pc_default_machine_options()),
hot_add_cpu is set in pc_machine_class_init(), so we don't
need to set it in pc_q35_machine_options(), pc_i440fx_machine_options()
and xenfv_machine_options(), except to clear it in
pc_i440fx_1_4_machine_opt().
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't touch isapc when we change guest ABI and add new entries
to PC_COMPAT_* or new PCMachineClass compat flags. This means
isapc never guaranteed guest ABI and cross-QEMU-version live
migration compatibility. There's no point in keeping code for
kvm-pv-eoi and APIC ID compatibility in pc_init_isa().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The modern bar is accessed now via yet another address space created just
for that purpose and it does not really need FlatView and dispatch tree
as it has a single memory region so it is just a waste of memory. Things
get even worse when there are dozens or hundreds of virtio-pci devices -
since these address spaces are global, changing any of them triggers
rebuilding all address spaces.
This replaces indirect accesses to the modern BAR with a simple lookup
and direct calls to memory_region_dispatch_read/write.
This is expected to save lots of memory at boot time after applying:
[Qemu-devel] [PULL 00/32] Misc changes for 2017-09-22
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While changing the s/g list allocation, commit 3b3b0628
also changed the descriptor counting to count iovec entries
as split by cpu_physical_memory_map(). Previously only the
actual descriptor entries were counted and the split into
the iovec happened afterwards in virtqueue_map().
Count the entries again instead to avoid erroneous
"Looped descriptor" errors.
Reported-by: Hans Middelhoek <h.middelhoek@ospito.nl>
Link: https://forum.proxmox.com/threads/vm-crash-with-memory-hotplug.35904/
Fixes: 3b3b062821 ("virtio: slim down allocation of VirtQueueElements")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IO_LIMIT and IO_BASE registers should not be writable if
gen_pcie_root_port's io-reserve property is set to 0.
The COMMAND register should have the IO flag read only.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure we don't forget to add the Conventional PCI or PCI
Express interface names on PCI device classes in the future.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Revieed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
xen-pt doesn't set the is_express field, but is supposed to be
able to handle PCI Express devices too. Mark it as hybrid.
Suggested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:
1) The ones that already have INTERFACE_PCIE_DEVICE set:
* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3
2) base-pci-bridge
Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:
* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge
The direct subtypes of base-pci-bridge not touched by this patch
are:
* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
marked as PCIe-only devices.
3) megasas-base
Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.
"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".
Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Change all devices that set is_express=1 to implement
INTERFACE_PCIE_DEVICE.
Cc: Keith Busch <keith.busch@intel.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: qemu-block@nongnu.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following devices support both PCI Express and Conventional
PCI, by including special code to handle the QEMU_PCI_CAP_EXPRESS
flag and/or conditional pcie_endpoint_cap_init() calls:
* vfio-pci (is_express=1, but legacy PCI handled by
vfio_populate_device())
* vmxnet3 (is_express=0, but PCIe handled by vmxnet3_realize())
* pvscsi (is_express=0, but PCIe handled by pvscsi_realize())
* virtio-pci (is_express=0, but PCIe handled by
virtio_pci_dc_realize(), and additional legacy PCI code at
virtio_pci_realize())
* base-xhci (is_express=1, but pcie_endpoint_cap_init() call
is conditional on pci_bus_is_express(dev->bus)
* Note that xhci does not clear QEMU_PCI_CAP_EXPRESS like the
other hybrid devices
Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Those two interfaces will be used to indicate which device types
support Conventional PCI or PCI Express buses. Management
software will be able to use the qom-list-types QMP command to
query that information.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIe busses are always little endian, so set the endianness of the
memory region to little endian rather than native such that operations
work as expected on big endian targets.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert the 'modern_state' part of virtio-pci to modern migration
macros.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU with the pcie-pci-bridge device crashes if the guest board doesn't support MSI,
e.g. 'qemu-system-ppc64 -M prep -device pcie-pci-bridge'.
This is caused by wrong pcie-pci-bridge instantiation error handling. This patch fixes this issue
by falling back to legacy INTx if MSI is not available.
Also set the bridge's 'msi' property default value to 'auto' in order to trigger errors
only when user explicitly set msi=on.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst the underlying PCI bridge implementation supports 32-bit PCI IO
accesses, unfortunately they are truncated at the legacy 64K limit.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_log_put() is called to decomission the dirty log between qemu and
a vhost device when stopping the device. Such a call can happen from
migration_completion().
Present code sets dev->log_size to zero too early in vhost_log_put(),
causing the sync check to always return false. As a consequence, the
last pass on the dirty bitmap never happens at the end of migration.
If a vhost device was busy (writing to guest memory) until the last
moments before vhost_virtqueue_stop(), this error will result in guest
memory corruption (at least) following migrations.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
See docs/specs/vmcoreinfo.txt for details.
"etc/vmcoreinfo" fw_cfg entry is added when using "-device vmcoreinfo".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reintroduce the write callback that was removed when write support was
removed in commit 023e314856.
Contrary to the previous callback implementation, the write_cb
callback is called whenever a write happened, so handlers must be
ready to handle partial write as necessary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ioh3420_interrupts_init() pass error message to local_err, then
propagate it to errp by error_propagate(), which is not necessary.
So eliminate it and pass errp directly instead of local_err.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On commit f8cd1b02 ("pci: Convert to realize"), no error_set*()
call was added for the pcie_chassis_add_slot() error case.
pcie_chassis_add_slot() errors get ignored, making QEMU crash
later. e.g.:
$ qemu-system-x86_64 -device ioh3420 -device xio3130-downstream
qemu-system-x86_64: memory.c:2166: memory_region_del_subregion: Assertion `subregion->container == mr' failed.
Aborted (core dumped)
Fix it by reporting the error using error_setg().
Fixes: f8cd1b0201
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change introduces a new TPM backend driver that can communicate with
swtpm(software TPM emulator) using unix domain socket interface. QEMU talks to
the TPM emulator using QEMU's socket-based chardev backend device.
Swtpm uses two Unix sockets for communications, one for plain TPM commands and
responses, and one for out-of-band control messages. QEMU passes the data
socket to be used over the control channel.
The swtpm and associated tools can be found here:
https://github.com/stefanberger/swtpm
The swtpm's control channel protocol specification can be found here:
https://github.com/stefanberger/swtpm/wiki/Control-Channel-Specification
Usage:
# setup TPM state directory
mkdir /tmp/mytpm
chown -R tss:root /tmp/mytpm
/usr/bin/swtpm_setup --tpm-state /tmp/mytpm --createek
# Ask qemu to use TPM emulator with given tpm state directory
qemu-system-x86_64 \
[...] \
-chardev socket,id=chrtpm,path=/tmp/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis,tpmdev=tpm0 \
[...]
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
buffer reallocation is very unlikely to be backend specific. Hence move inside
the tis.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
TPM configuration options are backend implementation details and shall not be
part of base TPMBackend object, and these shall not be accessed directly outside
of the class, hence added a new interface method, get_tpm_options() to
TPMDriverOps., which shall be implemented by the derived classes to return
configured tpm options.
A new tpm backend api - tpm_backend_query_tpm() which uses _get_tpm_options() to
prepare TpmInfo.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This allows backend implementations left optional interface methods.
For mandatory methods assertion checks added.
Took the opportunity to remove unused methods:
- tpm_backend_get_desc()
- TPMDriverOps->handle_startup_error
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger<stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Initialize and free TPMBackend data members in it's own instance_init() and
instance_finalize methods.
Took the opportunity to remove unneeded destroy() method from TpmDriverOps
interface as TPMBackend is a Qemu Object, we can use object_unref() inplace of
tpm_backend_destroy() to free the backend object, hence removed destroy() from
TPMDriverOps interface.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Move thread handling inside TPMBackend, this way backend implementations need
not to maintain their own thread life cycle, instead they needs to implement
'handle_request()' class method that always been called from a thread.
This change made tpm_backend_int.h kind of useless, hence removed it.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
TPMDriverOps inside TPMBackend is not required, as it is supposed to be a class
member. The only possible reason for keeping in TPMBackend was, to get the
backend type in tpm.c where dedicated backend api, tpm_backend_get_type() is
present.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
EBADMSG was only added to OpenBSD very recently. To make QEMU compilable
on older OpenBSD versions use EMSGSIZE instead when a mismatch between
number of received bytes and message size indicated in the header was
found.
Return -EMSGSIZE and convert all other errnos in the same functions to
return the negative errno.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This calculation of the first exception vector in
the ITNS<n> register being accessed:
int startvec = 32 * (offset - 0x380) + NVIC_FIRST_IRQ;
is incorrect, because offset is in bytes, so we only want
to multiply by 8.
Spotted by Coverity (CID 1381484, CID 1381488), though it is
not correct that it actually overflows the buffer, because
we have a 'startvec + i < s->num_irq' guard.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1507650856-11718-1-git-send-email-peter.maydell@linaro.org
Coverity points out that we forgot the 'break' for
the SAU_CTRL write case (CID1381683). This has
no actual visible consequences because it happens
that the following case is effectively a no-op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1507742676-9908-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Initially from Anton D. Kachalov" <mouse@yandex-team.ru> but the SoB was
missing.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20170920064915.30027-1-clg@kaod.org
[clg: change commit log and subject
replace UL suffix by ULL ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
heterogeneous cpus are not supported and hotplugging different
cpu model crashes QEMU:
qemu-system-x86_64 -cpu qemu64 -smp 1,maxcpus=2
(qemu) device_add host-x86_64-cpu,socket-id=1,core-id=0,thread-id=0,id=foo
(qemu) info cpus
error: failed to get MSR 0x38d
qemu-system-x86_64: target/i386/kvm.c:2121: kvm_get_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
Aborted (core dumped)
Gracefully fail hotplug process in case of user mistake.
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1507638879-200718-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Linux kernel will query the ATA IDENTITY DEVICE data, word 217
to determine the rotations per minute of the disk. If this has
the value 1, it is taken to be an SSD and so Linux sets the
'rotational' flag to 0 for the I/O queue and will stop using that
disk as a source of random entropy. Other operating systems may
also take into account rotation rate when setting up default
behaviour.
Mgmt apps should be able to set the rotation rate for virtualized
block devices, based on characteristics of the host storage in use,
so that the guest OS gets sensible behaviour out of the box. This
patch thus adds a 'rotation-rate' parameter for 'ide-hd' device
types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20171004114008.14849-3-berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Linux kernel will query the SCSI "Block device characteristics"
VPD to determine the rotations per minute of the disk. If this has
the value 1, it is taken to be an SSD and so Linux sets the
'rotational' flag to 0 for the I/O queue and will stop using that
disk as a source of random entropy. Other operating systems may
also take into account rotation rate when setting up default
behaviour.
Mgmt apps should be able to set the rotation rate for virtualized
block devices, based on characteristics of the host storage in use,
so that the guest OS gets sensible behaviour out of the box. This
patch thus adds a 'rotation-rate' parameter for 'scsi-hd' and
'scsi-block' device types. For the latter, this parameter will be
ignored unless the host device has TYPE_DISK.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20171004114008.14849-2-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch add a MachineClass element that can be set in the machine C
code to specify a list of supported CPU types. If the supported CPU
types are specified the user enter CPU (by -cpu at runtime) is checked
against the supported types and QEMU exits if they aren't supported.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <b8474e9d2e0a219d9bac901342f983b13d009301.1507059418.git.alistair.francis@xilinx.com>
[ehabkost: removed assert(), rewrote comment]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-----BEGIN PGP SIGNATURE-----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=y2Kg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 06 Oct 2017 16:52:59 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (54 commits)
block/mirror: check backing in bdrv_mirror_top_flush
qcow2: truncate the tail of the image file after shrinking the image
qcow2: fix return error code in qcow2_truncate()
iotests: Fix 195 if IMGFMT is part of TEST_DIR
block/mirror: check backing in bdrv_mirror_top_refresh_filename
block: support passthrough of BDRV_REQ_FUA in crypto driver
block: convert qcrypto_block_encrypt|decrypt to take bytes offset
block: convert crypto driver to bdrv_co_preadv|pwritev
block: fix data type casting for crypto payload offset
crypto: expose encryption sector size in APIs
block: use 1 MB bounce buffers for crypto instead of 16KB
iotests: Add test 197 for covering copy-on-read
block: Perform copy-on-read in loop
block: Add blkdebug hook for copy-on-read
iotests: Restore stty settings on completion
block: Uniform handling of 0-length bdrv_get_block_status()
qemu-io: Add -C for opening with copy-on-read
commit: Remove overlay_bs
qemu-iotests: Test commit block job where top has two parents
qemu-iotests: Allow QMP pretty printing in common.qemu
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we added support for the new SHCSR bits in v8M in commit
437d59c17e the code to support writing to the new HARDFAULTPENDED
bit was accidentally only added for non-secure writes; the
secure banked version of the bit should also be writable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-21-git-send-email-peter.maydell@linaro.org
Implement the register interface for the SAU: SAU_CTRL,
SAU_TYPE, SAU_RNR, SAU_RBAR and SAU_RLAR. None of the
actual behaviour is implemented here; registers just
read back as written.
When the CPU definition for Cortex-M33 is eventually
added, its initfn will set cpu->sau_sregion, in the same
way that we currently set cpu->pmsav7_dregion for the
M3 and M4.
Number of SAU regions is typically a configurable
CPU parameter, but this patch doesn't provide a
QEMU CPU property for it. We can easily add one when
we have a board that requires it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-14-git-send-email-peter.maydell@linaro.org
Add the new M profile Secure Fault Status Register
and Secure Fault Address Register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-10-git-send-email-peter.maydell@linaro.org
In the v7M architecture, there is an invariant that if the CPU is
in Handler mode then the CONTROL.SPSEL bit cannot be nonzero.
This in turn means that the current stack pointer is always
indicated by CONTROL.SPSEL, even though Handler mode always uses
the Main stack pointer.
In v8M, this invariant is removed, and CONTROL.SPSEL may now
be nonzero in Handler mode (though Handler mode still always
uses the Main stack pointer). In preparation for this change,
change how we handle this bit: rename switch_v7m_sp() to
the now more accurate write_v7m_control_spsel(), and make it
check both the handler mode state and the SPSEL bit.
Note that this implicitly changes the point at which we switch
active SP on exception exit from before we pop the exception
frame to after it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-4-git-send-email-peter.maydell@linaro.org
Reset for devices does not include an automatic clear of the
device state (unlike CPU state, where most of the state
structure is cleared to zero). Add some missing initialization
of NVIC state that meant that the device was left in the wrong
state if the guest did a warm reset.
(In particular, since we were resetting the computed state like
s->exception_prio but not all the state it was computed
from like s->vectors[x].active, the NVIC wound up in an
inconsistent state that could later trigger assertion failures.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1506092407-26985-2-git-send-email-peter.maydell@linaro.org
The device uses serial_hds in its realize function and thus can't be
used twice. Apart from that, the comma in its name makes it quite hard
to use for the user anyway, since a comma is normally used to separate
the device name from its properties when using the "-device" parameter
or the "device_add" HMP command.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1506441116-16627-1-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current code checks if the next block exceeds the size of the card.
This generates an error while reading the last block of the card.
Do the out-of-bounds check when starting to read a new block to fix this.
This issue became visible with increased error checking in Linux 4.13.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20170916091611.10241-1-m.olbrich@pengutronix.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The condition of the for-loop makes sure that b is always smaller
than s->blocks, so the "if (b >= s->blocks)" statement is completely
superfluous here.
Buglink: https://bugs.launchpad.net/qemu/+bug/1715007
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The "sclpquiesce" device is just an internal device that should not be
created by the user directly. Though it currently does not seem to cause
any obvious trouble when the user instantiates an additional device, let's
better mark it with user_creatable = false to avoid unexpected behavior,
e.g. because the quiesce notifier gets registered multiple times.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1507193105-15627-1-git-send-email-thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
A TYPE_SCLP_CPU_HOTPLUG device for handling cpu hotplug events
is already created by the sclp event facility. Adding a second
TYPE_SCLP_CPU_HOTPLUG device via -device sclp-cpu-hotplug creates
an ambiguity in raise_irq_cpu_hotplug(), leading to a crash once
a cpu is hotplugged.
To fix this, disallow creating a sclp-cpu-hotplug device manually.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The "sclp" device is just an internal device that can not be instantiated
by the users. If they try to use it, they only get a simple error message:
$ qemu-system-s390x -nographic -device sclp
qemu-system-s390x: Option '-device s390-sclp-event-facility' cannot be
handled by this machine
Since sclp_init() tries to create a TYPE_SCLP_EVENT_FACILITY which is
a non-pluggable sysbus device, there is really no way that the "sclp"
device can be used by the user, so let's set the user_creatable = false
accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1507125199-22562-1-git-send-email-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If we fail to set a proper TOD clock on the target system, this can
already result in some problematic cases. We print several warn messages
on source and target in that case.
If kvm fails to set a nonzero epoch index, then we must ultimately fail
the migration as this will result in a giant time leap backwards. This
patch lets the migration fail if we can not set the guest time on the
target.
On failure the guest will resume normally on the original host machine.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split failure change from epoch index change, minor fixups]
Message-Id: <20171004105751.24655-3-borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Commit e996583eb3 ("s390x/css: activate ChannelSubSys migration",
2017-07-11) was supposed to enable css migration for virtio-ccw
machines starting 2.10, but it ended up effectively enabling it
only for 2.10 as the registration of the appropriate VMStateDescription
happens in ccw_machine_2_10_instance_options which does not get
called for machines more recent than 2_10.
Let us move the corresponding chunk of code (which conditionally enables
the migration based on the value of the corresponding class property) to
ccw_init, which is called for each virtio-ccw machine instance.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20171004110109.16525-1-pasic@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Will be handy in the future.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's move it into the machine, so we trigger the IRQ after setting
ms->possible_cpus (which SCLP uses to construct the list of
online CPUs).
This also fixes a problem reported by Thomas Huth, whereby qemu can be
crashed using the none machine
qemu-s390x-softmmu -M none -monitor stdio
-> device_add qemu-s390-cpu
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The problem is, that the current implementation places unrealistic and
arbitrary constraints on the length of writes to the device (that is the
outbound requests), by asserting ccw.count being such that that even the
worst case escaped payload will fit an more or less arbitrary sized
buffer. Actually on protocol level there is nothing to justify such
a limitation.
Another strange thing is the return value which more or less reflects
the size (written) after escaping instead of before escaping. This
is strange, because this return value is used to calculate SCSW.count.
Let us teach 3270 how to deal with arbitrary long writes.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reported-by: Jason J . Herne <jjherne@linux.vnet.ibm.com>
Tested-by: Jason J . Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <20170920172314.102710-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let us convert the 3270 code so it uses the recently introduced
CcwDataStream abstraction instead of blindly assuming direct data access.
This patch does not change behavior beyond introducing IDA support: for
direct data access CCWs everything stays as-is. (If there are bugs, they
are also preserved).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170920172314.102710-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This reverts commit d32bd032d8.
Turns out that old QEMUs always created a pci host bridge
and for many CPU models the migration from old QEMUs to new
QEMUs will fail with
qemu-system-s390x: Unknown savevm section or instance 'PCIBUS' 0
qemu-system-s390x: load of migration failed: Invalid argument
As a quick fix we will revert the commit and always create the
pci host bridge.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[fixed revert to keep the comment fixup, added a comment in the code]
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Message-Id: <20170928131831.81393-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's add indirect data addressing support for our virtual channel
subsystem. This implementation does not bother with any kind of
prefetching. We simply step through the IDAL on demand.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-6-pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The architecture mandates the addresses to be accessed on the first
indirection level (that is, the data addresses without IDA, and the
(M)IDAW addresses with (M)IDA) to be checked against an CCW format
dependent limit maximum address. If a violation is detected, the storage
access is not to be performed and a channel program check needs to be
generated. As of today, we fail to do this check.
Let us stick even closer to the architecture specification.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-5-pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Replace direct access which implicitly assumes no IDA
or MIDA with the new ccw data stream interface which should
cope with these transparently in the future.
Note that checking the return code for ccw_dstream_* will be
done in a follow-on patch.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-4-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Replace direct access which implicitly assumes no IDA
or MIDA with the new ccw data stream interface which should
cope with these transparently in the future.
Note that checking the return code for ccw_dstream_* will be
done in a follow-on patch.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a preparation for introducing handling for indirect data
addressing and modified indirect data addressing (CCW). Here we introduce
an interface which should make the addressing scheme transparent for the
client code. Here we implement only the basic scheme (no IDA or MIDA).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Define default CPU type in generic way in machine class_init
and let common machine code handle cpu_model parsing.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <1505998749-269631-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
NVIDIA has defined a specification for creating GPUDirect "cliques",
where devices with the same clique ID support direct peer-to-peer DMA.
When running on bare-metal, tools like NVIDIA's p2pBandwidthLatencyTest
(part of cuda-samples) determine which GPUs can support peer-to-peer
based on chipset and topology. When running in a VM, these tools have
no visibility to the physical hardware support or topology. This
option allows the user to specify hints via a vendor defined
capability. For instance:
<qemu:commandline>
<qemu:arg value='-set'/>
<qemu:arg value='device.hostdev0.x-nv-gpudirect-clique=0'/>
<qemu:arg value='-set'/>
<qemu:arg value='device.hostdev1.x-nv-gpudirect-clique=1'/>
<qemu:arg value='-set'/>
<qemu:arg value='device.hostdev2.x-nv-gpudirect-clique=1'/>
</qemu:commandline>
This enables two cliques. The first is a singleton clique with ID 0,
for the first hostdev defined in the XML (note that since cliques
define peer-to-peer sets, singleton clique offer no benefit). The
subsequent two hostdevs are both added to clique ID 1, indicating
peer-to-peer is possible between these devices.
QEMU only provides validation that the clique ID is valid and applied
to an NVIDIA graphics device, any validation that the resulting
cliques are functional and valid is the user's responsibility. The
NVIDIA specification allows a 4-bit clique ID, thus valid values are
0-15.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If the hypervisor needs to add purely virtual capabilties, give us a
hook through quirks to do that. Note that we determine the maximum
size for a capability based on the physical device, if we insert a
virtual capability, that can change. Therefore if maximum size is
smaller after added virt capabilities, use that.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If vfio_add_std_cap() errors then going to out prepends irrelevant
errors for capabilities we haven't attempted to add as we unwind our
recursive stack. Just return error.
Fixes: 7ef165b9a8 ("vfio/pci: Pass an error object to vfio_add_capabilities")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fixes e2b6c17 (kvmclock: update system_time_msr address forcibly)
which makes a call to get the latest value of the address
stored in system_timer_msr, but then uses the old address anyway.
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
Message-Id: <59b67db0bd15a46ab47c3aa657c81a4c11f168ea.1506702472.git.Jim.Somerville@windriver.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the only time that users can set watchdog action is at
the start as all we expose is this -watchdog-action command line
argument. This is suboptimal when users want to plug the device
later via monitor. Alternatively, they might want to change the
action for already existing device on the fly.
Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1447169
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <35d6ce6fe3d357122d73b8272bc8198134c74104.1504771369.git.mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
[Missing colon in doc comment fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We already have enum that enumerates all the actions that a
watchdog can take when hitting its timeout: WatchdogAction.
Use that instead of inventing our own.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <ce2790634e6a1b3b6cf90462399d17bad83f0290.1504771369.git.mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The new name is WatchdogAction which is shorter,
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <dbd61a0928821348486d0d6260be2bd3b02b6402.1504771369.git.mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a library header, so angle brackets are more appropriate; also
move the line to before QEMU headers, as is recommended in HACKING.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170920085952.3872-1-famz@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Valgrind detects an invalid read operation when hot-plugging of an
USB device fails:
$ valgrind x86_64-softmmu/qemu-system-x86_64 -device usb-ehci -nographic -S
==30598== Memcheck, a memory error detector
==30598== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==30598== Using Valgrind-3.12.0 and LibVEX; rerun with -h for copyright info
==30598== Command: x86_64-softmmu/qemu-system-x86_64 -device usb-ehci -nographic -S
==30598==
QEMU 2.10.50 monitor - type 'help' for more information
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
==30598== Invalid read of size 8
==30598== at 0x60EF50: object_unparent (object.c:445)
==30598== by 0x580F0D: usb_try_create_simple (bus.c:346)
==30598== by 0x581BEB: usb_claim_port (bus.c:451)
==30598== by 0x582310: usb_qdev_realize (bus.c:257)
==30598== by 0x4CB399: device_set_realized (qdev.c:914)
==30598== by 0x60E26D: property_set_bool (object.c:1886)
==30598== by 0x61235E: object_property_set_qobject (qom-qobject.c:27)
==30598== by 0x61000F: object_property_set_bool (object.c:1162)
==30598== by 0x4567C3: qdev_device_add (qdev-monitor.c:630)
==30598== by 0x456D52: qmp_device_add (qdev-monitor.c:807)
==30598== by 0x470A99: hmp_device_add (hmp.c:1933)
==30598== by 0x3679C3: handle_hmp_command (monitor.c:3123)
The object_unparent() here is not necessary anymore since commit
69382d8b3e ("qdev: Fix object reference leak in case device.realize()
fails"), so let's remove it now.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1506526106-30971-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu uses wheel-up/down button events for mouse wheel input, however
linux applications typically want REL_WHEEL events.
This fixes wheel with linux guests. Tested with X11/wayland, and
windows virtio-input driver.
Based on a patch from Marc.
Added property to enable/disable wheel axis.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170926113243.26081-1-kraxel@redhat.com
-----BEGIN PGP SIGNATURE-----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=/+LV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170927a' into staging
Migration pull 2017-09-27
# gpg: Signature made Wed 27 Sep 2017 14:56:23 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170927a:
migration: Route more error paths
migration: Route errors up through vmstate_save
migration: wire vmstate_save_state errors up to vmstate_subsection_save
migration: Check field save returns
migration: check pre_save return in vmstate_save_state
migration: pre_save return int
migration: disable auto-converge during bulk block migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vmstate_save_state is called in lots of places.
Route error returns from the easier cases back up; there are lots
of more complex cases where their own error paths need fixing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-7-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit message fix up as Peter's review
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Using a standard QOM object link we can pass a reference to the MAC_DBDMA
controller to the MACIO_IDE object which removes the last external parameter
to macio_ide_register_dma().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
One of the reasons macio_ide_register_dma() needs to exist is because the
channel id isn't passed into the MACIO_IDE object. Pass in the channel id
using a qdev property to remove this requirement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead we can now instantiate the MAC_DBDMA object directly within the
macio device. We also add the DBDMA device as a child property so that
it is possible to retrieve later.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These fields were used to manually handle IO requests that weren't aligned
to a sector boundary before this feature was supported by the block API.
Once the block API changed to support byte-aligned IO requests, the macio
controller was switched over to use it in commit be1e343 but these fields
were accidentally left behind. Remove them, including the initialisation
in DBDMA_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When running with KVM PR, if a new HPT is allocated we need to inform
KVM about the HPT address and size. This is currently done by hacking
the value of SDR1 and pushing it to KVM in several places.
Also, migration breaks the guest since it is very unlikely the HPT has
the same address in source and destination, but we push the incoming
value of SDR1 to KVM anyway.
This patch introduces a new virtual hypervisor hook so that the spapr
code can provide the correct value of SDR1 to be pushed to KVM each
time kvmppc_put_books_sregs() is called.
It allows to get rid of all the hacking in the spapr/kvmppc code and
it fixes migration of nested KVM PR.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
and exit before uselessly trying to load it if the file does not
exists.
Issue discovered by Coverity Scan.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PHBs can be created with an index property, in which case the machine
code automatically sets all the MMIO windows at addresses derived from
the index. Alternatively, they can be manually created without index,
but the user has to provide addresses for all MMIO windows.
The non-index way happens to be more trouble than it's worth: it's
difficult to use, keeps requiring (potentially incompatible) changes
when some new parameter needs adding, and is awkward to check for
collisions. It currently even has a bug that prevents to use two
non-index PHBs because their child DRCs are all derived from the
same index == -1 value, and, thus, collide.
This patch hence makes the index property mandatory. As a consequence,
the PHB's memory regions and BUID are now always configured according
to the index, and it is no longer possible to set them from the command
line.
This DOES BREAK backwards compat, but we don't think the non-index
PHB feature was used in practice (at least libvirt doesn't) and the
simplification is worth it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This consolidates some duplicated code in a dedicated helpers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The use of KVM_PPC_GET_HTAB_FD is open-coded in kvmppc_read_hptes()
and kvmppc_write_hpte().
This patch modifies kvmppc_get_htab_fd() so that it can be used
everywhere we need to access the in-kernel htab:
- add an index argument
=> only kvmppc_read_hptes() passes an actual index, all other users
pass 0
- add an errp argument to propagate error messages to the caller.
=> spapr migration code prints the error
=> hpte helpers pass &error_abort to keep the current behavior
of hw_error()
While here, this also fixes a bug in kvmppc_write_hpte() so that it
opens the htab fd for writing instead of reading as it currently does.
This never broke anything because we currently never call this code,
as explained in the changelog of commit c138593380:
"This support updating htab managed by the hypervisor. Currently
we don't have any user for this feature. This actually bring the
store_hpte interface in-line with the load_hpte one. We may want
to use this when we want to emulate henter hcall in qemu for HV
kvm."
The above is still true today.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When kvmppc_get_htab_fd() fails, its return value is propagated up to
qemu_savevm_state_iterate() or to qemu_savevm_state_complete_precopy().
All savevm handlers expect to receive a negative errno on error.
Let's patch kvmppc_get_htab_fd() accordingly.
While here, let's change htab_load() in the spapr code to also
propagate the error, since it doesn't make sense to abort() if
we couldn't get the htab fd from KVM.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Apple uses an IBM MPIC2A without timers, it has 64 sources.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The timing register exists on all variants of MacIO IDE, we just
store and return its value.
The interrupts register only exists on KeyLargo but it doesn't
hurt to have it. The lack of this register causes MacOS X to
hangs under some circumstances.
Both are 32-bit only. The HW might support smaller access sizes
but no known OS uses them.
Because the core IDE subsystem doesn't provide us with a way
to query the main (level) interrupt state, nor do we have a way
to know that DBDMA issued a (edge) interrupt, we reflect both
through a private pair of qirq's in order to maintain the
register state.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This completely reworks the handling of the control register
according to my understanding of the HW and the spec.
It should (hopefully ... still testing) fix a number of issues
most notably cases of MacOS hanging.
Also update dbdma_unassigned_rw() and dbdma_unassigned_flush() to
have the expected behaviour now that flush is handled slightly
differently.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We use 900Mhz, otherwise MacOS X 10.5 refuses to install.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These registers are present in 440 SoCs (and maybe in others too) and
U-Boot accesses them when printing register info. We don't emulate
these but add them to avoid crashing when they are read or written.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some PPC SoCs have an EHCI with OHCI companion USB controller. Add a
new type for this similar to types used for other embedded SoCs.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some PPC SoCs have an EHCI with OHCI companion USB controller. To
emulate this allow the sysbus version of OHCI to be used as a companion.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently aborts if you try to use the device at the command
line:
$ ppc64-softmmu/qemu-system-ppc64 -S -machine prep -device pc87312
Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:222:
qemu-system-ppc64: -device pc87312: Device 'parallel0' is in use
Aborted (core dumped)
It uses parallel_hds in its realize function, so I can not be
instantiated by the user again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
