The fbstp implementation fails to check for out-of-range and invalid
values, instead just taking the result of conversion to int64_t and
storing its sign and low 18 decimal digits. Fix this by checking for
an out-of-range result (invalid conversions always result in INT64_MAX
or INT64_MIN from the softfloat code, which are large enough to be
considered as out-of-range by this code) and storing the packed BCD
indefinite encoding in that case.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132351110.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fbstp implementation stores +0 when the rounded result should be
-0 because it compares an integer value with 0 to determine the sign.
Fix this by checking the sign bit of the operand instead.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132350230.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fxam implementation does not check for invalid encodings, instead
treating them like NaN or normal numbers depending on the exponent.
Fix it to check that the high bit of the significand is set before
treating an encoding as NaN or normal, thus resulting in correct
handling (all of C0, C2 and C3 cleared) for invalid encodings.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132349311.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementations of the fldl2t, fldl2e, fldpi, fldlg2 and fldln2
instructions load fixed constants independent of the rounding mode.
Fix them to load a value correctly rounded for the current rounding
mode (but always rounded to 64-bit precision independent of the
precision control, and without setting "inexact") as specified.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2005132348310.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation uses floatx80_scalbn for the final scaling
operation. floatx80_scalbn ends up rounding the result using the
dynamic rounding precision configured for the FPU. But only a limited
set of x87 floating-point instructions are supposed to respect the
dynamic rounding precision, and fscale is not in that set. Fix the
implementation to save and restore the rounding precision around the
call to floatx80_scalbn.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045430.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation passes infinite exponents through to generic
code that rounds the exponent to a 32-bit integer before using
floatx80_scalbn. In round-to-nearest mode, and ignoring exceptions,
this works in many cases. But it fails to handle the special cases of
scaling 0 by a +Inf exponent or an infinity by a -Inf exponent, which
should produce a NaN, and because it produces an inexact result for
finite nonzero numbers being scaled, the result is sometimes incorrect
in other rounding modes. Add appropriate handling of infinite
exponents to produce a NaN or an appropriately signed exact zero or
infinity as a result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045010.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation does not check for invalid encodings in the
exponent operand, thus treating them like INT_MIN (the value returned
for invalid encodings by floatx80_to_int32_round_to_zero). Fix it to
treat them similarly to signaling NaN exponents, thus generating a
quiet NaN result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070044190.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fscale instruction returns a NaN exponent
unchanged. Fix it to return a quiet NaN when the provided exponent is
a signaling NaN.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070043330.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fxtract instruction treats all nonzero
operands as normal numbers, so yielding incorrect results for invalid
formats, infinities, NaNs and subnormal and pseudo-denormal operands.
Implement appropriate handling of all those cases.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <alpine.DEB.2.21.2005070042360.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we hotplug vcpus, cpu_update_state is added to vm_change_state_head
in kvm_arch_init_vcpu(). But it forgot to delete in kvm_arch_destroy_vcpu() after
unplug. Then it will cause a use-after-free access. This patch delete it in
kvm_arch_destroy_vcpu() to fix that.
Reproducer:
virsh setvcpus vm1 4 --live
virsh setvcpus vm1 2 --live
virsh suspend vm1
virsh resume vm1
The UAF stack:
==qemu-system-x86_64==28233==ERROR: AddressSanitizer: heap-use-after-free on address 0x62e00002e798 at pc 0x5573c6917d9e bp 0x7fff07139e50 sp 0x7fff07139e40
WRITE of size 1 at 0x62e00002e798 thread T0
#0 0x5573c6917d9d in cpu_update_state /mnt/sdb/qemu/target/i386/kvm.c:742
#1 0x5573c699121a in vm_state_notify /mnt/sdb/qemu/vl.c:1290
#2 0x5573c636287e in vm_prepare_start /mnt/sdb/qemu/cpus.c:2144
#3 0x5573c6362927 in vm_start /mnt/sdb/qemu/cpus.c:2150
#4 0x5573c71e8304 in qmp_cont /mnt/sdb/qemu/monitor/qmp-cmds.c:173
#5 0x5573c727cb1e in qmp_marshal_cont qapi/qapi-commands-misc.c:835
#6 0x5573c7694c7a in do_qmp_dispatch /mnt/sdb/qemu/qapi/qmp-dispatch.c:132
#7 0x5573c7694c7a in qmp_dispatch /mnt/sdb/qemu/qapi/qmp-dispatch.c:175
#8 0x5573c71d9110 in monitor_qmp_dispatch /mnt/sdb/qemu/monitor/qmp.c:145
#9 0x5573c71dad4f in monitor_qmp_bh_dispatcher /mnt/sdb/qemu/monitor/qmp.c:234
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200513132630.13412-1-pannengyuan@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dynamic allocating vcpu state structure according to smp value to be
more precise and safe. Previously it will alloccate array of fixed size
HAX_MAX_VCPU.
This is achieved by using g_new0 to dynamic allocate the array. The
allocated size is obtained from smp.max_cpus in MachineState. Also, the
size is compared with HAX_MAX_VCPU when creating the vm. The reason for
choosing dynamic array over linked list is because the status is visited
by index all the time.
This will lead to QEMU checking whether the smp value is larger than the
HAX_MAX_VCPU when creating vm, if larger, the process will terminate,
otherwise it will allocate array of size smp to store the status.
V2: Check max_cpus before open vm. (Philippe)
Signed-off-by: WangBowen <bowen.wang@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Message-Id: <20200509035952.187615-1-colin.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code is not related to hardware emulation.
Move it under accel/ with the other hypervisors.
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200508100222.7112-1-philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functional change.
This information will be used by following patches.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-15-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Detected by asm test suite failures in dav1d
(https://code.videolan.org/videolan/dav1d). Can be reproduced by
`qemu-x86_64 -cpu core2duo ./tests/checkasm --test=mc_8bpc 1659890620`.
Signed-off-by: Janne Grunau <j@jannau.net>
Message-Id: <20200401225253.30745-1-j@jannau.net>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID leaf CPUID_Fn80000008_ECX provides information about the
number of threads supported by the processor. It was found that
the field ApicIdSize(bits 15-12) was not set correctly.
ApicIdSize is defined as the number of bits required to represent
all the ApicId values within a package.
Valid Values: Value Description
3h-0h Reserved.
4h up to 16 threads.
5h up to 32 threads.
6h up to 64 threads.
7h up to 128 threads.
Fh-8h Reserved.
Fix the bit appropriately.
This came up during following thread.
https://lore.kernel.org/qemu-devel/158643709116.17430.15995069125716778943.malonedeb@wampee.canonical.com/#t
Refer the Processor Programming Reference (PPR) for AMD Family 17h
Model 01h, Revision B1 Processors. The documentation is available
from the bugzilla Link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reported-by: Philipp Eppelt <1871842@bugs.launchpad.net>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <20200417215345.64800.73351.stgit@localhost.localdomain>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We define DEBUG_PCALL since b884fc5e (2012-10-06).
7.5 years later it is safe to assume we can remove it :)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20200331105048.27989-7-f4bug@amsat.org>
Convert the insns in the one-register-and-immediate group to decodetree.
In the new decode, our asimd_imm_const() function returns a 64-bit value
rather than a 32-bit one, which means we don't need to treat cmode=14 op=1
as a special case in the decoder (it is the only encoding where the two
halves of the 64-bit value are different).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-10-peter.maydell@linaro.org
Convert the VCVT fixed-point conversion operations in the
Neon 2-regs-and-shift group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-9-peter.maydell@linaro.org
Convert the VSHLL and VMOVL insns from the 2-reg-shift group
to decodetree. Since the loop always has two passes, we unroll
it to avoid the awkward reassignment of one TCGv to another.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-8-peter.maydell@linaro.org
Convert the VQSHLU and QVSHL 2-reg-shift insns to decodetree.
These are the last of the simple shift-by-immediate insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-5-peter.maydell@linaro.org
Convert the VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree.
(These are the last instructions in the group that are vectorized;
the rest all require looping over each element.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-4-peter.maydell@linaro.org
Convert the VSHR 2-reg-shift insns to decodetree.
Note that unlike the legacy decoder, we present the right shift
amount to the trans_ function as a positive integer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-3-peter.maydell@linaro.org
Convert the VSHL and VSLI insns from the Neon 2-registers-and-a-shift
group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-2-peter.maydell@linaro.org
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this conversion, we will be able to use the same helpers
with sve. This also fixes a bug in which we failed to clear
the high bits of the SVE register after an AdvSIMD operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this conversion, we will be able to use the same helpers
with sve. In particular, pass 3 vector parameters for the
3-operand operations; for advsimd the destination register
is also an input.
This also fixes a bug in which we failed to clear the high bits
of the SVE register after an AdvSIMD operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As these declarations are restricted to !CONFIG_USER_ONLY in
helper.c, only declare them when system-mode emulation is used.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200526172427.17460-8-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
All this code is guarded checking CONFIG_USER_ONLY definition.
Drop the duplicated checks.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200526172427.17460-7-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The decode_basedisp*() methods are only used in ioinst.c,
which is only build in system-mode emulation.
I/O instructions are privileged, and other S instructions
are decoded elsewhere.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200526172427.17460-6-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We need some little help in the code to reduce the valgrind noise.
This patch does this with some designated initializers for the cpu
model features and subfunctions.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200429074201.100924-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We usually use '_do_' for internal functions. Rename
memory_region_do_writeback() as memory_region_writeback().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Ibex is a small and efficient, 32-bit, in-order RISC-V core with
a 2-stage pipeline that implements the RV32IMC instruction set
architecture.
For more details on lowRISC see here:
https://github.com/lowRISC/ibex
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
The PMP is enabled by default via the "pmp" property so there is no need
for us to set it in the init function. As all CPUs have PMP support just
remove the set_feature() call in the CPU init functions.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Previously if we didn't enable the MMU it would be enabled in the
realize() function anyway. Let's ensure that if we don't want the MMU we
disable it. We also don't need to enable the MMU as it will be enabled
in realize() by default.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
The reset vector is set in the init function don't set it again in
realize.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
The RISC-V ISA spec version 1.09.1 has been deprecated in QEMU since
4.1. It's not commonly used so let's remove support for it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Signal handling support for NetBSD arm/aarch64
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl7WgZkdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8ZZwf9Flw0VHTBBzsZHPjL
JVOdJsz8pnQLRDxk9JUo7D40xehpN1oE5mFCV5aFNMSz929r7OB5WfUHsyNpbms/
aCDz2ADRscBZ4xEZY9cxUYiNzq4fb3Hez64ibGbRm3uHU1C2pPNDRlFpL9aFQMCE
elhn54hwOAZUZAAKszepClHGglPffijY5QU5VX6Gq6nmqEmCBlA8lkxMtaV/NRnS
QfskDF4KvglGqGDCcKI2tfotu5Y9k3R4yh7Nzc2JnotbHk4WrNbhBl6r9KcdXddi
uQng4J0zhBa1Kq4ENdpKgAqN/ZNVEbsFzev5aY77UD76cnxqbQQ7hfXl2gAORp6m
Vy5lVw==
=nRee
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200602' into staging
Vector rotate support
Signal handling support for NetBSD arm/aarch64
# gpg: Signature made Tue 02 Jun 2020 17:43:05 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20200602:
accel/tcg: Provide a NetBSD specific aarch64 cpu_signal_handler
accel/tcg: Adjust cpu_signal_handler for NetBSD/arm
tcg: Improve move ops in liveness_pass_2
target/s390x: Use tcg_gen_gvec_rotl{i,s,v}
target/ppc: Use tcg_gen_gvec_rotlv
tcg/ppc: Implement INDEX_op_rot[lr]v_vec
tcg/aarch64: Implement INDEX_op_rotl{i,v}_vec
tcg/i386: Implement INDEX_op_rotl{i,s,v}_vec
tcg: Implement gvec support for rotate by scalar
tcg: Remove expansion to shift by vector from do_shifts
tcg: Implement gvec support for rotate by vector
tcg: Implement gvec support for rotate by immediate
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
