Implement the machinery for fine-grained traps on normal sysregs.
Any sysreg with a fine-grained trap will set the new field to
indicate which FGT register bit it should trap on.
FGT traps only happen when an AArch64 EL2 enables them for
an AArch64 EL1. They therefore are only relevant for AArch32
cpregs when the cpreg can be accessed from EL0. The logic
in access_check_cp_reg() will check this, so it is safe to
add a .fgt marking to an ARM_CP_STATE_BOTH ARMCPRegInfo.
The DO_BIT and DO_REV_BIT macros define enum constants FGT_##bitname
which can be used to specify the FGT bit, eg
.fgt = FGT_AFSR0_EL1
(We assume that there is no bit name duplication across the FGT
registers, for brevity's sake.)
Subsequent commits will add the .fgt fields to the relevant register
definitions and define the FGT_nnn values for them.
Note that some of the FGT traps are for instructions that we don't
handle via the cpregs mechanisms (mostly these are instruction traps).
Those we will have to handle separately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-10-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-10-peter.maydell@linaro.org
Define the system registers which are provided by the
FEAT_FGT fine-grained trap architectural feature:
HFGRTR_EL2, HFGWTR_EL2, HDFGRTR_EL2, HDFGWTR_EL2, HFGITR_EL2
All these registers are a set of bit fields, where each bit is set
for a trap and clear to not trap on a particular system register
access. The R and W register pairs are for system registers,
allowing trapping to be done separately for reads and writes; the I
register is for system instructions where trapping is on instruction
execution.
The data storage in the CPU state struct is arranged as a set of
arrays rather than separate fields so that when we're looking up the
bits for a system register access we can just index into the array
rather than having to use a switch to select a named struct member.
The later FEAT_FGT2 will add extra elements to these arrays.
The field definitions for the new registers are in cpregs.h because
in practice the code that needs them is code that also needs
the cpregs information; cpu.h is included in a lot more files.
We're also going to add some FGT-specific definitions to cpregs.h
in the next commit.
We do not implement HAFGRTR_EL2, because we don't implement
FEAT_AMUv1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-9-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-9-peter.maydell@linaro.org
The HSTR_EL2 register is not supposed to have an effect unless EL2 is
enabled in the current security state. We weren't checking for this,
which meant that if the guest set up the HSTR_EL2 register we would
incorrectly trap even for accesses from Secure EL0 and EL1.
Add the missing checks. (Other places where we look at HSTR_EL2
for the not-in-v8A bits TTEE and TJDBX are already checking that
we are in NS EL0 or EL1, so there we alredy know EL2 is enabled.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-8-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-8-peter.maydell@linaro.org
The semantics of HSTR_EL2 require that it traps cpreg accesses
to EL2 for:
* EL1 accesses
* EL0 accesses, if the access is not UNDEFINED when the
trap bit is 0
(You can see this in the I_ZFGJP priority ordering, where HSTR_EL2
traps from EL1 to EL2 are priority 12, UNDEFs are priority 13, and
HSTR_EL2 traps from EL0 are priority 15.)
However, we don't get this right for EL1 accesses which UNDEF because
the register doesn't exist at all or because its ri->access bits
non-configurably forbid the access. At EL1, check for the HSTR_EL2
trap early, before either of these UNDEF reasons.
We have to retain the HSTR_EL2 check in access_check_cp_reg(),
because at EL0 any kind of UNDEF-to-EL1 (including "no such
register", "bad ri->access" and "ri->accessfn returns 'trap to EL1'")
takes precedence over the trap to EL2. But we only need to do that
check for EL0 now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230130182459.3309057-7-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-7-peter.maydell@linaro.org
The HSTR_EL2 register has a collection of trap bits which allow
trapping to EL2 for AArch32 EL0 or EL1 accesses to coprocessor
registers. The specification of these bits is that when the bit is
set we should trap
* EL1 accesses
* EL0 accesses, if the access is not UNDEFINED when the
trap bit is 0
In other words, all UNDEF traps from EL0 to EL1 take precedence over
the HSTR_EL2 trap to EL2. (Since this is all AArch32, the only kind
of trap-to-EL1 is the UNDEF.)
Our implementation doesn't quite get this right -- we check for traps
in the order:
* no such register
* ARMCPRegInfo::access bits
* HSTR_EL2 trap bits
* ARMCPRegInfo::accessfn
So UNDEFs that happen because of the access bits or because the
register doesn't exist at all correctly take priority over the
HSTR_EL2 trap, but where a register can UNDEF at EL0 because of the
accessfn we are incorrectly always taking the HSTR_EL2 trap. There
aren't many of these, but one example is the PMCR; if you look at the
access pseudocode for this register you can see that UNDEFs taken
because of the value of PMUSERENR.EN are checked before the HSTR_EL2
bit.
Rearrange helper_access_check_cp_reg() so that we always call the
accessfn, and use its return value if it indicates that the access
traps to EL0 rather than continuing to do the HSTR_EL2 check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-6-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-6-peter.maydell@linaro.org
Rearrange the code in do_coproc_insn() so that we calculate the
syndrome value for a potential trap early; we're about to add a
second check that wants this value earlier than where it is currently
determined.
(Specifically, a trap to EL2 because of HSTR_EL2 should take
priority over an UNDEF to EL1, even when the UNDEF is because
the register does not exist at all or because its ri->access
bits non-configurably fail the access. So the check we put in
for HSTR_EL2 trapping at EL1 (which needs the syndrome) is
going to have to be done before the check "is the ARMCPRegInfo
pointer NULL".)
This commit is just code motion; the change to HSTR_EL2
handling that will use the 'syndrome' variable is in a
subsequent commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-5-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-5-peter.maydell@linaro.org
We added the CPAccessResult values CP_ACCESS_TRAP_UNCATEGORIZED_EL2
and CP_ACCESS_TRAP_UNCATEGORIZED_EL3 purely in order to use them in
the ats_access() function, but doing so was incorrect (a bug fixed in
a previous commit). There aren't any cases where we want an access
function to be able to request a trap to EL2 or EL3 with a zero
syndrome value, so remove these enum values.
As well as cleaning up dead code, the motivation here is that
we'd like to implement fine-grained-trap handling in
helper_access_check_cp_reg(). Although the fine-grained traps
to EL2 are always lower priority than trap-to-same-EL and
higher priority than trap-to-EL3, they are in the middle of
various other kinds of trap-to-EL2. Knowing that a trap-to-EL2
must always for us have the same syndrome (ie that an access
function will return CP_ACCESS_TRAP_EL2 and there is no other
kind of trap-to-EL2 enum value) means we don't have to try
to choose which of the two syndrome values to report if the
access would trap to EL2 both for the fine-grained-trap and
because the access function requires it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-4-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-4-peter.maydell@linaro.org
The AArch32 ATS12NSO* address translation operations are supposed to
trap to either EL2 or EL3 if they're executed at Secure EL1 (which
can only happen if EL3 is AArch64). We implement this, but we got
the syndrome value wrong: like other traps to EL2 or EL3 on an
AArch32 cpreg access, they should report the 0x3 syndrome, not the
0x0 'uncategorized' syndrome. This is clear in the access pseudocode
for these instructions.
Fix the syndrome value for these operations by correcting the
returned value from the ats_access() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-3-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-3-peter.maydell@linaro.org
The encodings 0,0,C7,C9,0 and 0,0,C7,C9,1 are AT SP1E1RP and AT
S1E1WP, but our ARMCPRegInfo definitions for them incorrectly name
them AT S1E1R and AT S1E1W (which are entirely different
instructions). Fix the names.
(This has no guest-visible effect as the names are for debug purposes
only.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-2-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-2-peter.maydell@linaro.org
Cortex-A76 supports 40bits of address space. sbsa-ref's memory
starts above this limit.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230126114416.2447685-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's explicitly list out all accelerators that we support when trying to
determine the supported set of GIC versions. KVM was already separate, so
the only missing one is HVF which simply reuses all of TCG's emulation
code and thus has the same compatibility matrix.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221223090107.98888-3-agraf@csgraf.de
[PMM: Added qtest to the list of accelerators]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Up to now, the finalize_gic_version() code open coded what is essentially
a support bitmap match between host/emulation environment and desired
target GIC type.
This open coding leads to undesirable side effects. For example, a VM with
KVM and -smp 10 will automatically choose GICv3 while the same command
line with TCG will stay on GICv2 and fail the launch.
This patch combines the TCG and KVM matching code paths by making
everything a 2 pass process. First, we determine which GIC versions the
current environment is able to support, then we go through a single
state machine to determine which target GIC mode that means for us.
After this patch, the only user noticable changes should be consolidated
error messages as well as TCG -M virt supporting -smp > 8 automatically.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20221223090107.98888-2-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We currently only support GICv2 emulation. To also support GICv3, we will
need to pass a few system registers into their respective handler functions.
This patch adds support for HVF to call into the TCG callbacks for GICv3
system register handlers. This is safe because the GICv3 TCG code is generic
as long as we limit ourselves to EL0 and EL1 - which are the only modes
supported by HVF.
To make sure nobody trips over that, we also annotate callbacks that don't
work in HVF mode, such as EL state change hooks.
With GICv3 support in place, we can run with more than 8 vCPUs.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20230128224459.70676-1-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current FIFO handling code does not reset RXFE/RXFF flags when guest
resets FIFO by writing to UARTLCR register, although internal FIFO state
is reset to 0 read count. Actual guest-visible flag update will happen
only on next data read or write attempt. As a result of that any guest
that expects RXFE flag to be set (and RXFF to be cleared) after resetting
FIFO will never see that happen.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230123162304.26254-5-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PL011 currently lacks a reset method. Implement it.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230123162304.26254-4-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previous change slightly modified the way we handle data writes when
FIFO is disabled. Previously we kept incrementing read_pos and were
storing data at that position, although we only have a
single-register-deep FIFO now. Then we changed it to always store data
at pos 0.
If guest disables FIFO and the proceeds to read data, it will work out
fine, because we still read from current read_pos before setting it to
0.
However, to make code less fragile, introduce a post_load hook for
PL011State and move fixup read FIFO state when FIFO is disabled. Since
we are introducing a post_load hook, also do some sanity checking on
untrusted incoming input state.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Message-id: 20230123162304.26254-3-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PL011 can be in either of 2 modes depending guest config: FIFO and
single register. The last mode could be viewed as a 1-element-deep FIFO.
Current code open-codes a bunch of depth-dependent logic. Refactor FIFO
depth handling code to isolate calculating current FIFO depth.
One functional (albeit guest-invisible) side-effect of this change is
that previously we would always increment s->read_pos in UARTDR read
handler even if FIFO was disabled, now we are limiting read_pos to not
exceed FIFO depth (read_pos itself is reset to 0 if user disables FIFO).
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230123162304.26254-2-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the macro instead of two explicit string literals.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230124232059.4017615-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- update playbooks for custom runners
- add section timing support to gitlab
- upgrade fedora images to 37
- purge perl from the build system and deps
- disable unstable tests in CI
- improve intro, emulation and semihosting docs
- semihosting bug fix and O_BINARY default
- add memory-sve test
- fix some races in qht
- improve plugin handling of memory helpers
- optimise plugin hooks
- fix some plugin deadlocks
- reduce win64-cross build time by dropping some targets
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmPb3fgACgkQ+9DbCVqe
KkQbXAf9Eoc+PdNvafbqzH/blPjvd9ve8pJ+GcPDukNXwxP8OF/jFEJUQ1E7l9O7
y0qV4akKCdIqVice4R5bK2CAq44Y3aut8SDf56C8E3Riha2zA2RbQWOv/zCvA3OP
LFF+OaXZyg4JTR48HUKzh9ei2bd1+ccBSUe+xlRi59XaV5K8+5bmcZj10QKUR0lD
0HC5auEWWpayvd5D7Da15C7+oVY3LMCFxSdpHwbuIPPan/TRo5yqMI6ChYDKB8QD
gdwMCL8znj2ADCTBftyBDYDAtjKVyLQidf7KdQHiSF+nmXYopS6SbsPCOMtJqCMH
tXcKAIxs/MEntPrWTKTdtdnzotJVKw==
=AtfN
-----END PGP SIGNATURE-----
Merge tag 'pull-jan-omnibus-020223-1' of https://gitlab.com/stsquad/qemu into staging
Testing, docs, semihosting and plugin updates
- update playbooks for custom runners
- add section timing support to gitlab
- upgrade fedora images to 37
- purge perl from the build system and deps
- disable unstable tests in CI
- improve intro, emulation and semihosting docs
- semihosting bug fix and O_BINARY default
- add memory-sve test
- fix some races in qht
- improve plugin handling of memory helpers
- optimise plugin hooks
- fix some plugin deadlocks
- reduce win64-cross build time by dropping some targets
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmPb3fgACgkQ+9DbCVqe
# KkQbXAf9Eoc+PdNvafbqzH/blPjvd9ve8pJ+GcPDukNXwxP8OF/jFEJUQ1E7l9O7
# y0qV4akKCdIqVice4R5bK2CAq44Y3aut8SDf56C8E3Riha2zA2RbQWOv/zCvA3OP
# LFF+OaXZyg4JTR48HUKzh9ei2bd1+ccBSUe+xlRi59XaV5K8+5bmcZj10QKUR0lD
# 0HC5auEWWpayvd5D7Da15C7+oVY3LMCFxSdpHwbuIPPan/TRo5yqMI6ChYDKB8QD
# gdwMCL8znj2ADCTBftyBDYDAtjKVyLQidf7KdQHiSF+nmXYopS6SbsPCOMtJqCMH
# tXcKAIxs/MEntPrWTKTdtdnzotJVKw==
# =AtfN
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Feb 2023 15:59:52 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-jan-omnibus-020223-1' of https://gitlab.com/stsquad/qemu: (36 commits)
gitlab: cut even more from cross-win64-system build
plugins: Iterate on cb_lists in qemu_plugin_user_exit
cpu-exec: assert that plugin_mem_cbs is NULL after execution
tcg: exclude non-memory effecting helpers from instrumentation
translator: always pair plugin_gen_insn_{start, end} calls
plugins: fix optimization in plugin_gen_disable_mem_helpers
plugins: make qemu_plugin_user_exit's locking order consistent with fork_start's
util/qht: use striped locks under TSAN
thread: de-const qemu_spin_destroy
util/qht: add missing atomic_set(hashes[i])
cpu: free cpu->tb_jmp_cache with RCU
tests/tcg: add memory-sve test for aarch64
semihosting: add O_BINARY flag in host_open for NT compatibility
semihosting: Write back semihosting data before completion callback
docs: add an introduction to the system docs
semihosting: add semihosting section to the docs
docs: add a new section to outline emulation support
docs: add hotlinks to about preface text
MAINTAINERS: Fix the entry for tests/tcg/nios2
gitlab: wrap up test results for custom runners
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Remove the deprecated OTP config of sifive_u
* Add libfdt to some of our CI jobs that were still missing it
* Use __builtin_bswap() everywhere (all compiler versions support it now)
* Deprecate the HAXM accelerator
* Document PCI devices handling on s390x
* Make Audiodev introspectable
* Improve the runtime of some CI jobs
-----BEGIN PGP SIGNATURE-----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=uq7y
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-01-31' of https://gitlab.com/thuth/qemu into staging
* qtest improvements
* Remove the deprecated OTP config of sifive_u
* Add libfdt to some of our CI jobs that were still missing it
* Use __builtin_bswap() everywhere (all compiler versions support it now)
* Deprecate the HAXM accelerator
* Document PCI devices handling on s390x
* Make Audiodev introspectable
* Improve the runtime of some CI jobs
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmPY59YRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXzhxAAmoq2j2sbAf2Vr9tz6Ez2p9oKNYnzUEWb
# NGXdvQMcVFKIdjvSYt5ozLC53OFIzuS74X7oHKbdLvGzez3nMCijZIbzN6vNnvd9
# HNGum4blNwHEfQcY9hr9y30Iurc7CQu6VtwGF+XXdzQZDbPz1Z4AWvtPTLcTbkxa
# PskYJfFvow/oaTHDA/7t+90cxCOixKvQMKXL5ATCtMRGnjlbOAEoPbXUB+yM24mk
# 9qp1L/8h8pvXfeXlFj+KETmu+eE5ETEOQtqc2KhQqqze2+VMKYxSX2H+sNkJBPDP
# En8Mpy+fEdefu8Jcu+M2kMLhf1f3LVf9uARhLZY4/xmOYFg+F3xzwpshnH1bs+Kw
# IzWP84uHjE77jSy/wKvYiCx2hdCDwO0G+zym67D1fPzvjzKzUNprV4OIuRzTWah3
# 6Zli5uuaLrBNjR8SJB1HDmLGKDFgToH9dzfLPtDmW8UPJGkAGcBbPKktLTe5y/4E
# del99NqpTx5SAqMmbSMRPZ/vZ7ITdfB0Av3a0GdO8j7eSPb9BOsoZOVD2/iUzab/
# P0dBuNqMM8fwywVKqcK+0CJ/npWIJvOqqlwSDqhY1A78G/uRuapOqUwsB/LWRFv5
# /1VvHfA2rv4l9o66N5jssS5/D1v5p/UBB6JvlTUvuoJMFTXa9de9XFxYxfkyiaAz
# LJl+Dh+aeWk=
# =uq7y
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 31 Jan 2023 10:05:10 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-01-31' of https://gitlab.com/thuth/qemu: (27 commits)
gitlab-ci.d/buildtest: Merge the --without-default-* jobs
tests/qtest/display-vga-test: Add proper checks if a device is available
gitlab-ci.d/buildtest: Remove ppc-softmmu from the clang-system job
qapi, audio: Make introspection reflect build configuration more closely
qapi, audio: add query-audiodev command
docs/s390x/pcidevices: document pci devices on s390x
tests/qtest/boot-serial-test: Constify tests[] array
tests/qtest/vnc-display-test: Disable on Darwin
tests/qtest/vnc-display-test: Use the 'none' machine
tests/qtest/vnc-display-test: Suppress build warnings on Windows
tests/tcg: Do not build/run TCG tests if TCG is disabled
docs/about/deprecated: Mark HAXM in QEMU as deprecated
MAINTAINERS: Abort HAXM maintenance
qemu/bswap: Use compiler __builtin_bswap() on NetBSD
qemu/bswap: Use compiler __builtin_bswap() on FreeBSD
qemu/bswap: Use compiler __builtin_bswap() on Haiku
qemu/bswap: Remove <byteswap.h> dependency
qemu/bswap: Replace bswapXXs() by compiler __builtin_bswap()
qemu/bswap: Replace bswapXX() by compiler __builtin_bswap()
tests/docker/dockerfiles: Add libfdt to the i386 and to the riscv64 container
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than iterate over all plugins for all events,
iterate over plugins that have registered a given event.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230117035701.168514-4-richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-36-alex.bennee@linaro.org>
There are actually a whole bunch of helpers that don't affect memory
that we shouldn't instrument. They are helpfully identified by the
TCG_CALL_NO_SIDE_EFFECTS flag which marks out lookup_tb_ptr as well as
a lot of the maths helpers. To avoid the string compare we introduce a
new flag for plugin internals so we skip that too.
Related: #1381
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230108164731.61469-4-cota@braap.org>
[AJB: updated to skip all no SE plugins, add flag for plugin helper]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230124180127.1881110-34-alex.bennee@linaro.org>
We were mistakenly checking tcg_ctx->plugin_insn as a canary to know
whether the TB had emitted helpers that might have accessed memory.
The problem is that tcg_ctx->plugin_insn gets updated on every
instruction in the TB, which results in us wrongly performing the
optimization (i.e. not clearing cpu->plugin_mem_cbs) way too often,
since it's not rare that the last instruction in the TB doesn't
use helpers.
Fix it by tracking a per-TB canary.
While at it, expand documentation.
Related: #1381
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230108164731.61469-2-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-32-alex.bennee@linaro.org>
To fix potential deadlocks as reported by tsan.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230111151628.320011-6-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-31-alex.bennee@linaro.org>
We forgot to add this one in "a890643958 util/qht: atomically set b->hashes".
Detected with tsan.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230111151628.320011-3-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-28-alex.bennee@linaro.org>
Fixes the appended use-after-free. The root cause is that
during tb invalidation we use CPU_FOREACH, and therefore
to safely free a vCPU we must wait for an RCU grace period
to elapse.
$ x86_64-linux-user/qemu-x86_64 tests/tcg/x86_64-linux-user/munmap-pthread
=================================================================
==1800604==ERROR: AddressSanitizer: heap-use-after-free on address 0x62d0005f7418 at pc 0x5593da6704eb bp 0x7f4961a7ac70 sp 0x7f4961a7ac60
READ of size 8 at 0x62d0005f7418 thread T2
#0 0x5593da6704ea in tb_jmp_cache_inval_tb ../accel/tcg/tb-maint.c:244
#1 0x5593da6704ea in do_tb_phys_invalidate ../accel/tcg/tb-maint.c:290
#2 0x5593da670631 in tb_phys_invalidate__locked ../accel/tcg/tb-maint.c:306
#3 0x5593da670631 in tb_invalidate_phys_page_range__locked ../accel/tcg/tb-maint.c:542
#4 0x5593da67106d in tb_invalidate_phys_range ../accel/tcg/tb-maint.c:614
#5 0x5593da6a64d4 in target_munmap ../linux-user/mmap.c:766
#6 0x5593da6dba05 in do_syscall1 ../linux-user/syscall.c:10105
#7 0x5593da6f564c in do_syscall ../linux-user/syscall.c:13329
#8 0x5593da49e80c in cpu_loop ../linux-user/x86_64/../i386/cpu_loop.c:233
#9 0x5593da6be28c in clone_func ../linux-user/syscall.c:6633
#10 0x7f496231cb42 in start_thread nptl/pthread_create.c:442
#11 0x7f49623ae9ff (/lib/x86_64-linux-gnu/libc.so.6+0x1269ff)
0x62d0005f7418 is located 28696 bytes inside of 32768-byte region [0x62d0005f0400,0x62d0005f8400)
freed by thread T148 here:
#0 0x7f49627b6460 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:52
#1 0x5593da5ac057 in cpu_exec_unrealizefn ../cpu.c:180
#2 0x5593da81f851 (/home/cota/src/qemu/build/qemu-x86_64+0x484851)
Signed-off-by: Emilio Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230111151628.320011-2-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-27-alex.bennee@linaro.org>
This will be helpful in debugging problems with tracking SVE memory
accesses via the TCG plugins system.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Message-Id: <20230124180127.1881110-26-alex.bennee@linaro.org>
Windows open(2) implementation opens files in text mode by default and
needs a Windows-only O_BINARY flag to open files as binary. QEMU already
knows about that flag in osdep and it is defined to 0 on non-Windows,
so we can just add it to the host_flags for better compatibility.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20230106102018.20520-1-eiakovlev@linux.microsoft.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-25-alex.bennee@linaro.org>
'lock_user' allocates a host buffer to shadow a target buffer,
'unlock_user' copies that host buffer back to the target and frees the
host memory. If the completion function uses the target buffer, it
must be called after unlock_user to ensure the data are present.
This caused the arm-compatible TARGET_SYS_READC to fail as the
completion function, common_semi_readc_cb, pulled data from the target
buffer which would not have been gotten the console data.
I decided to fix all instances of this pattern instead of just the
console_read function to make things consistent and potentially fix
bugs in other cases.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221012014822.1242170-1-keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230124180127.1881110-24-alex.bennee@linaro.org>
Drop the frankly misleading quickstart section for a more rounded
introduction section. This new section gives an overview of the
accelerators as well as a high level introduction to some of the key
features of the emulator. We also expand on a general form for a QEMU
command line with a hopefully not too scary worked example of what
this looks like.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20230124180127.1881110-23-alex.bennee@linaro.org>
The main reason to do this is to document our O_BINARY implementation
decision somewhere. However I've also moved some of the implementation
details out of qemu-options and added links between the two. As a
bonus I've highlighted the scary warnings about host access with the
appropriate RST tags.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-22-alex.bennee@linaro.org>
This affects both system and user mode emulation so we should probably
list it up front.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-21-alex.bennee@linaro.org>
Make it easier to navigate the documentation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230124180127.1881110-20-alex.bennee@linaro.org>
tests/tcg/nios2/Makefile.target has accidentally been added
to the Microblaze section. Move it into the correct nios2
section instead - and while we're at it, it should also cover
the whole folder, and not only the Makefile.
Fixes: 67f80eb4d0 ("tests/tcg: enable debian-nios2-cross for test building")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230119130326.2030297-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-19-alex.bennee@linaro.org>
Instead of spewing the whole log to stdout lets just define them as
build artefacts so we can examine them later. Where we are running
check-tcg run it first as those tests are yet to be integrated into
meson. To avoid confusion we don't run multiple check-tcg tests at
once.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-18-alex.bennee@linaro.org>
linux-user blocks all signals while attempting to handle guest
signals (e.g. ABRT), which means that the default TERM sent by timeout
has no effect -- KILL instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230117035701.168514-2-richard.henderson@linaro.org>
[AJB: expanded commit message from cover letter]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230124180127.1881110-17-alex.bennee@linaro.org>
We are getting a lot of failures that are not related to changes so
this could be a flaky test.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-16-alex.bennee@linaro.org>
This image is perfectly capable of building QEMU, and indeed we do
that on gitlab. Drop the DOCKER_PARTIAL_IMAGES setting so we can also
test the gitlab build locally.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-15-alex.bennee@linaro.org>
When flex is not available, binutils sources default to the
'missing' script, but the current script available is not in
the format expected by the 'configure' script:
$ ./configure
...
/usr/src/binutils/missing: Unknown `--run' option
Try `/usr/src/binutils/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
...
checking for bison... bison -y
checking for flex... no
checking for lex... no
checking for flex... /usr/src/binutils/missing flex
$ make
...
updating ldgram.h
gcc -DHAVE_CONFIG_H -I. -I. -I. -D_GNU_SOURCE -I. -I. -I../bfd -I./../bfd -I./../include -I./../intl -I../intl -w -DLOCALEDIR="\"/usr/local/share/locale\"" -W -Wall -Wstrict-prototypes -Wmissing-prototypes -w -c `test -f 'ldgram.c' || echo './'`ldgram.c
`test -f ldlex.l || echo './'`ldlex.l
/bin/sh: 1: ldlex.l: not found
make[3]: *** [Makefile:662: ldlex.c] Error 127
make[3]: Leaving directory '/usr/src/binutils/ld'
make[2]: *** [Makefile:799: all-recursive] Error 1
By pass the 'missing' script use by directly installing 'flex'
in the container.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230112155643.7408-1-philmd@linaro.org>
Reviewed-by: Bastian-Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-14-alex.bennee@linaro.org>
Fedora 35 is EOL.
Update to upstream lcitool, that dropped f35 and added f37.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110132700.833690-7-marcandre.lureau@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-11-alex.bennee@linaro.org>
The up-coming upgrade to Fedora 37 will bring in libtcmalloc as a
dependency of libglusterfs which confuses our fuzz run. Rather than
disable the build lets use LSAN's suppression mechanism to prevent the
job from failing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230124180127.1881110-10-alex.bennee@linaro.org>
