Commit Graph

348 Commits

Author SHA1 Message Date
Paolo Bonzini
33c11879fd qemu-common: push cpu.h inclusion out of qemu-common.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:29 +02:00
Paolo Bonzini
1e00b8d57a hw: move CPU state serialization to migration/cpu.h
Remove usage of NEED_CPU_H from hw/hw.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:28 +02:00
Paolo Bonzini
28618ac652 target-cris: make cpu-qom.h not target specific
Make CRISCPU an opaque type within cpu-qom.h, and move all definitions of
private methods, as well as all type definitions that require knowledge
of the layout to cpu.h.  This helps making files independent of NEED_CPU_H
if they only need to pass around CPU pointers.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 13:08:04 +02:00
Stefan Weil
cb8d4c8f54 Fix some typos found by codespell
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-18 15:04:27 +03:00
Sergey Fedorov
90aa39a1cc tcg: Allow goto_tb to any target PC in user mode
In user mode, there's only a static address translation, TBs are always
invalidated properly and direct jumps are reset when mapping change.
Thus the destination address is always valid for direct jumps and
there's no need to restrict it to the pages the TB resides in.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12 14:06:42 -10:00
Sergey Fedorov
5b053a4a28 tcg: Clean up direct block chaining safety checks
We don't take care of direct jumps when address mapping changes. Thus we
must be sure to generate direct jumps so that they always keep valid
even if address mapping changes. Luckily, we can only allow to execute a
TB if it was generated from the pages which match with current mapping.

Document tcg_gen_goto_tb() declaration and note the reason for
destination PC limitations.

Some targets with variable length instructions allow TB to straddle a
page boundary. However, we make sure that both of TB pages match the
current address mapping when looking up TBs. So it is safe to do direct
jumps into the both pages. Correct the checks for some of those targets.

Given that, we can safely patch a TB which spans two pages. Remove the
unnecessary check in cpu_exec() and allow such TBs to be patched.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12 14:06:41 -10:00
Emilio G. Cota
89fee74a0f tb: consistently use uint32_t for tb->flags
We are inconsistent with the type of tb->flags: usage varies loosely
between int and uint64_t. Settle to uint32_t everywhere, which is
superior to both: at least one target (aarch64) uses the most significant
bit in the u32, and uint64_t is wasteful.

Compile-tested for all targets.

Suggested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1460049562-23517-1-git-send-email-cota@braap.org>
2016-05-12 14:06:40 -10:00
Markus Armbruster
da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Lluís Vilanova
1bcea73e13 tcg: Add type for vCPU pointers
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The
tracing infrastructure later needs to differentiate between regular
pointers and pointers to vCPUs.

Also changes all targets to use the new 'TCGv_env' type instead of the
generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env'
translates into 'TCGv_ptr'), but that could change in the future to
enforce the difference.

Note that a 'TCGv_env' type (for 'CPUState') is not added, since all
helpers currently receive the architecture-specific
pointer ('CPUArchState').

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Message-id: 145641859552.30295.7821536833590725201.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-03-01 13:27:09 +00:00
Peter Maydell
30456d5ba3 all: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-23 12:43:05 +00:00
Peter Maydell
66d79920b9 cris: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-16 14:29:26 +00:00
Peter Maydell
70e6b879d7 target-cris: Remove unnecessary ifdef from mmu.c
mmu.c is only built for CONFIG_SOFTMMU targets, so there is
no need to redundantly surround the whole file contents with
an #ifndef CONFIG_USER_ONLY. The ifdef also confuses the
Coccinelle tool.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-16 14:29:26 +00:00
Richard Henderson
e1ccc05444 tcg: Change tcg_global_mem_new_* to take a TCGv_ptr
Thus, use cpu_env as the parameter, not TCG_AREG0 directly.
Update all uses in the translators.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09 10:19:32 +11:00
Paolo Bonzini
508127e243 log: do not unnecessarily include qom/cpu.h
Split the bits that require it to exec/log.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-03 09:19:10 +00:00
Peter Maydell
23b0d7dfe5 cris: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-32-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:24 +00:00
Paolo Bonzini
79e8ed3597 cris: avoid "naked" qemu_log
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:47 +01:00
Paolo Bonzini
013a29424c qemu-log: introduce qemu_log_separate
In some cases, the same message is printed both on stderr and in the log.
Avoid duplicate output in the default case where stderr _is_ the log,
and standardize this to stderr+log where it used to use stdio+log.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:47 +01:00
Richard Henderson
522a0d4e3c target-*: Advance pc after recognizing a breakpoint
Some targets already had this within their logic, but make sure
it's present for all targets.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-28 10:57:16 -07:00
Markus Armbruster
4c315c2766 qdev: Protect device-list-properties against broken devices
Several devices don't survive object_unref(object_new(T)): they crash
or hang during cleanup, or they leave dangling pointers behind.

This breaks at least device-list-properties, because
qmp_device_list_properties() needs to create a device to find its
properties.  Broken in commit f4eb32b "qmp: show QOM properties in
device-list-properties", v2.1.  Example reproducer:

    $ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio
    {"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}}
    { "execute": "qmp_capabilities" }
    {"return": {}}
    { "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } }
    qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
    Aborted (core dumped)
    [Exit 134 (SIGABRT)]

Unfortunately, I can't fix the problems in these devices right now.
Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet
to mark them:

* Hang during cleanup (didn't debug, so I can't say why):
  "realview_pci", "versatile_pci".

* Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic",
  "fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such
  CPUs

* Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu",
  "host-powerpc64-cpu", "host-embedded-powerpc-cpu",
  "host-powerpc-cpu" (the powerpc ones can't currently reach the
  assertion, because the CPUs are only registered when KVM is enabled,
  but the assertion is arguably in the wrong place all the same)

Make qmp_device_list_properties() fail cleanly when the device is so
marked.  This improves device-list-properties from "crashes, hangs or
leaves dangling pointers behind" to "fails".  Not a complete fix, just
a better-than-nothing work-around.  In the above reproducer,
device-list-properties now fails with "Can't list properties of device
'pxa2xx-pcmcia'".

This also protects -device FOO,help, which uses the same machinery
since commit ef52358 "qdev-monitor: include QOM properties in -device
FOO, help output", v2.2.  Example reproducer:

    $ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help

Before:

    qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.

After:

    Can't list properties of device 'pxa2xx-pcmcia'

Cc: "Andreas Färber" <afaerber@suse.de>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Green <green@moxielogic.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Jia Liu <proljc@gmail.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
2015-10-09 15:25:57 +02:00
Richard Henderson
4e5e121515 tcg: Remove gen_intermediate_code_pc
It is no longer used, so tidy up everything reached by it.
This includes the gen_opc_* arrays, the search_pc parameter
and the inline gen_intermediate_code_internal functions.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:52 +11:00
Richard Henderson
bad729e272 tcg: Pass data argument to restore_state_to_opc
The gen_opc_* arrays are already redundant with the data stored in
the insn_start arguments.  Transition restore_state_to_opc to use
data from the latter.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:51 +11:00
Richard Henderson
190ce7fbc7 tcg: Add TCG_MAX_INSNS
Adjust all translators to respect it.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:50 +11:00
Richard Henderson
dc03246cc3 target-*: Drop cpu_gen_code define
This symbol no longer exists.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:50 +11:00
Richard Henderson
bd03c791a6 target-cris: Mirror gen_opc_pc into insn_start
This perhaps isn't ideal in terms of (ab)using the "pc" field
to encode both pc and ppc + delay branch state, as one has to
be aware of this when examining opcode dumps.

But it preserves existing logic, which will be good for bisection,
and it certainly does save storage space.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:48 +11:00
Richard Henderson
b933066ae0 target-*: Introduce and use cpu_breakpoint_test
Reduce the boilerplate required for each target.  At the same time,
move the test for breakpoint after calling tcg_gen_insn_start.

Note that arm and aarch64 do not use cpu_breakpoint_test, but still
move the inline test down after tcg_gen_insn_start.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:28 +11:00
Richard Henderson
959082fc4a target-*: Increment num_insns immediately after tcg_gen_insn_start
This does tidy the icount test common to all targets.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:27 +11:00
Richard Henderson
667b8e29c5 target-*: Unconditionally emit tcg_gen_insn_start
While we're at it, emit the opcode adjacent to where we currently
record data for search_pc.  This puts gen_io_start et al on the
"correct" side of the marker.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:27 +11:00
Richard Henderson
765b842ade tcg: Rename debug_insn_start to insn_start
With an eye toward making it mandatory.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:26 +11:00
Peter Crosthwaite
7233df4949 cris: Remove ELF_MACHINE from cpu.h
The only generic code relying on this is linux-user, but linux users'
default behaviour of defaulting ELF_MACHINE to ELF_ARCH will handle
this.

The bootloader can just pass EM_CRIS directly, as that is architecture
specific code.

This removes another architecture specific definition from the global
namespace.

Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:43 +02:00
Juan Quintela
16a1b6e97c target-cris: update CPU state save/load to use VMStateDescription
Update the CRIS CPU state save/load to use a VMStateDescription struct
rather than cpu_save/cpu_load functions.

Have to define TLBSet struct.
Multidimensional arrays in C are a mess, just unroll them.

Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM:
 * expand commit message a little since it's no longer one patch in
   a 35-patch series
 * add header/copyright comment to machine.c; credited copyright is
   Red Hat and author is Juan, since this commit gives the file all-new
   contents; license is LGPL-2-or-later, to match other target-cris code
 * remove hardcoded tab
 * add fields for locked_irq, interrupt_vector, fault_vector, trap_vector
 * drop minimum_version_id_old fields
 * bump version_id to 2 as we are not compatible with old state format
 * remove unnecessary hw/boards.h include
 * update to register via dc->vmsd]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-09-17 14:31:38 +01:00
Benjamin Herrenschmidt
97ed5ccdee tlb: Add "ifetch" argument to cpu_mmu_index()
This is set to true when the index is for an instruction fetch
translation.

The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.

All targets ignore it for now, and all other callers pass "false".

This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-11 08:15:28 -07:00
Veres Lajos
67cc32ebfd typofixes - v4
Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:45:43 +03:00
Richard Henderson
88174019d2 target-cris: Use movcond and setcond
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-09-08 08:48:34 +02:00
Richard Henderson
ecc7b3aa71 tcg: Remove tcg_gen_trunc_i64_i32
Replacing it with tcg_gen_extrl_i64_i32.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24 11:10:54 -07:00
Peter Crosthwaite
6b625fde5e disas: cris: QOMify target specific disas setup
Move the target_disas() cris specifics to the QOM disas_set_info() hook
and delete the cris specific code in disas.c.

This also now adds support for monitor_disas() to cris.

E.g.
(qemu) xp 0x40004000
0000000040004000: 0x1e6f25f0

And before this patch:
(qemu) xp/i 0x40004000
0x40004000: Asm output not supported on this arch

After:
(qemu) xp/i 0x40004000
0x40004000:  di
(qemu) xp/i 0x40004002
0x40004002:  move.d 0xb003c004,$r1

Note: second example is 6-byte misaligned instruction!

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:41 +02:00
Peter Crosthwaite
ea3e984740 cpu-exec: Purge all uses of ENV_GET_CPU()
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use
CPUState pointers and retrieving the env_ptr as minimally needed.

Scripted conversion for target-* change:

for I in target-*/cpu.h; do
    sed -i \
    's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \
    $I;
done

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:40 +02:00
Peter Crosthwaite
4bad9e392e cpu: Change cpu_exec_init() arg to cpu, not env
The callers (most of them in target-foo/cpu.c) to this function all
have the cpu pointer handy. Just pass it to avoid an ENV_GET_CPU() from
core code (in exec.c).

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:40 +02:00
Bharata B Rao
5a790cc4b9 cpu: Add Error argument to cpu_exec_init()
Add an Error argument to cpu_exec_init() to let users collect the
error. This is in preparation to change the CPU enumeration logic
in cpu_exec_init(). With the new enumeration logic, cpu_exec_init()
can fail if cpu_index values corresponding to max_cpus have already
been handed out.

Since all current callers of cpu_exec_init() are from instance_init,
use error_abort Error argument to abort in case of an error.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:40 +02:00
Peter Crosthwaite
d49190c420 disas: Remove uses of CPU env
disas does not need to access the CPU env for any reason. Change the
APIs to accept CPU pointers instead. Small change pattern needs to be
applied to all target translate.c. This brings us closer to making
disas.o a common-obj and less architecture specific in general.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22 17:40:01 +02:00
Michael Tokarev
302cb24add cris: remove unused cris_cond15 declarations
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
2015-03-19 11:11:55 +03:00
Richard Henderson
42a268c241 tcg: Change translator-side labels to a pointer
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.

Note that the code generating backends still manipulate labels as int.

With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13 12:28:18 -07:00
Eduardo Habkost
2994fd96d9 cpu: Make cpu_init() return QOM CPUState object
Instead of making cpu_init() return CPUArchState, return CPUState.

Changes were made using the Coccinelle semantic patch below.

  @@
  typedef CPUState;
  identifier e;
  expression args;
  type CPUArchState;
  @@
  -   e =
  +   cpu =
          cpu_init(args);
  -   if (!e) {
  +   if (!cpu) {
          ...
      }
  -   cpu = ENV_GET_CPU(env);
  +   e = cpu->env_ptr;

  @@
  identifier new_env, new_cpu, env, cpu;
  type CPUArchState;
  expression args;
  @@
  -{
  -   CPUState *cpu = ENV_GET_CPU(env);
  -   CPUArchState *new_env = cpu_init(args);
  -   CPUState *new_cpu = ENV_GET_CPU(new_env);
  +{
  +   CPUState *cpu = ENV_GET_CPU(env);
  +   CPUState *new_cpu = cpu_init(args);
  +   CPUArchState *new_env = new_cpu->env_ptr;
      ...
  }

  @@
  identifier c, cpu_init_func, cpu_model;
  type StateType, CPUType;
  @@
  -static inline StateType* cpu_init(const char *cpu_model)
  -{
  -   CPUType *c = cpu_init_func(cpu_model);
  (
  -   if (c == NULL) {
  -       return NULL;
  -   }
  -   return &c->env;
  |
  -   if (c) {
  -       return &c->env;
  -   }
  -   return NULL;
  )
  -}
  +#define cpu_init(cpu_model) CPU(cpu_init_func(cpu_model))

  @@
  identifier cpu_init_func;
  identifier model;
  @@
  -#define cpu_init(model) (&cpu_init_func(model)->env)
  +#define cpu_init(model) CPU(cpu_init_func(model))

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
[AF: Fixed up cpu_copy() manually]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-10 17:33:51 +01:00
Richard Henderson
fe700adb3d tcg: Introduce tcg_op_buf_count and tcg_op_buf_full
The method by which we count the number of ops emitted
is going to change.  Abstract that away into some inlines.

Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12 21:21:38 -08:00
Richard Henderson
0a7df5da98 tcg: Move emit of INDEX_op_end into gen_tb_end
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12 21:21:38 -08:00
Peter Maydell
ec53b45bcd exec.c: Drop TARGET_HAS_ICE define and checks
The TARGET_HAS_ICE #define is intended to indicate whether a target-*
guest CPU implementation supports the breakpoint handling. However,
all our guest CPUs have that support (the only two which do not
define TARGET_HAS_ICE are unicore32 and openrisc, and in both those
cases the bp support is present and the lack of the #define is just
a bug). So remove the #define entirely: all new guest CPU support
should include breakpoint handling as part of the basic implementation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
2015-01-20 15:19:32 +00:00
Paolo Bonzini
cd42d5b236 gen-icount: check cflags instead of use_icount global
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-03 09:22:12 +01:00
Antony Pavlov
339aaf5b7f qemu-log: add log category for MMU info
Running barebox on qemu-system-mips* with '-d unimp' overloads
stderr by very very many mips_cpu_handle_mmu_fault() messages:

  mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3
  mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3
  mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0

So it's very difficult to find LOG_UNIMP message.

The mips_cpu_handle_mmu_fault() messages appear on enabling ANY
logging! It's not very handy.

Adding separate log category for *_cpu_handle_mmu_fault()
logging fixes the problem.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16 18:43:19 +00:00
zhanghailiang
fae38221e7 target-cris/translate.c: fix out of bounds read
In function t_gen_mov_TN_preg and t_gen_mov_preg_TN, The begin check about the
validity of in-parameter 'r' is useless. We still access cpu_PR[r] in the
follow code if it is invalid. Which will be an out-of-bounds read error.

Fix it by using assert() to ensure it is valid before using it.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-17 13:59:23 +01:00
Peter Maydell
2472b6c07b gdbstub: Allow target CPUs to specify watchpoint STOP_BEFORE_ACCESS flag
GDB assumes that watchpoint set via the gdbstub remote protocol will
behave in the same way as hardware watchpoints for the target. In
particular, whether the CPU stops with the PC before or after the insn
which triggers the watchpoint is target dependent. Allow guest CPU
code to specify which behaviour to use. This fixes a bug where with
guest CPUs which stop before the accessing insn GDB would manually
step forward over what it thought was the insn and end up one insn
further forward than it should be.

We set this flag for the CPU architectures which set
gdbarch_have_nonsteppable_watchpoint in gdb 7.7:
ARM, CRIS, LM32, MIPS and Xtensa.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Michael Walle <michael@walle.cc> (for lm32)
Message-id: 1410545057-14014-1-git-send-email-peter.maydell@linaro.org
2014-10-06 14:25:43 +01:00
Richard Henderson
5a1f7f44cf target-cris: Use cpu_exec_interrupt qom hook
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1410626734-3804-11-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-25 18:54:21 +01:00