Until v2.07s, the VRMA page size (L||LP) was encoded in LPCR[VRMASD].
In v3.0 that moved to the partition table PS field.
The powernv machine can now run KVM HPT guests on POWER9/10 CPUs with
this fix and the patch to add ASDR.
Fixes: 3367c62f52 ("target/ppc: Support for POWER9 native hash")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230730111842.39292-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
HDEC is defined to not wake from PM state. There is a check in the HDEC
timer to avoid setting the interrupt if we are in a PM state, but no
check on PM entry to lower HDEC if it already fired. This can cause a
HDECR wake up and QEMU abort with unsupported exception in Power Save
mode.
Fixes: 4b236b621b ("ppc: Initial HDEC support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230726182230.433945-4-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The ASDR register was introduced in ISA v3.0. It has not been
implemented for HPT. With HPT, ASDR is the format of the slbmte RS
operand (containing VSID), which matches the ppc_slb_t field.
Fixes: 3367c62f52 ("target/ppc: Support for POWER9 native hash")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230726182230.433945-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The board firmware handles this correctly following the Open Firmware
standard which we missed. This fixes 64 bit BARs when using VOF.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <20230721221320.1311E7456AB@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The board firmware names devices by their class so match that for
common devices. Also make sure the /rtas node has a name. This is
needed because VOF otherwise does not include it in results got by
nextprop which is how AmigaOS queries it and fails if no name property
is found.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <808ade37aa141563d1ee349254151672bf7a5d59.1689725688.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The register offset of the ROM BAR is 0x30 not 0x28. This fixes the
reg property entry of the ROM region in the device tree.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <6abd73b1211f9d0776dfa5d71d6294f17eecb426.1689725688.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The original non-free board firmware sets the command register of the
USB functions to 7 and some guests rely on this for working USB. Match
what the board firmware does when using VOF instead.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <06a2b864431425f23d1f2b5abf0c027819ac11c6.1689725688.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
scripts/archive-source.sh needs meson in order to download the subprojects,
therefore meson needs to be part of the host environment in which VM-based
build jobs run.
Fixes: 2019cabfee ("meson: subprojects: replace submodules with wrap files", 2023-06-06)
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When CR0.TS=1, execution of x87 FPU, MMX, and some SSE instructions will
cause a Device Not Available (DNA) exception (#NM). System software uses
this exception event to lazily context switch FPU state.
Before this patch, enter_mmx helpers may be generated just before #NM
generation, prematurely resetting FPU state before the guest has a
chance to save it.
Signed-off-by: Matt Borgerson <contact@mborgerson.com>
Message-ID: <CADc=-s5F10muEhLs4f3mxqsEPAHWj0XFfOC2sfFMVHrk9fcpMg@mail.gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Would you please consider pulling this trivial fix, which reduces
the generated code on x86 by ~3% when running linux-user with
the hppa target?
Thanks,
Helge
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZMwriQAKCRD3ErUQojoP
X0oxAQC7HlQ4j23o4ylqbXTiZdOeY26TjWTlw38OkuSXcqgCMAD/UmwEDawEGTKv
SuRjrASdFzpjvjDss2nreahL9hGvrAI=
=eoAk
-----END PGP SIGNATURE-----
Merge tag 'hppa-linux-user-speedup-pull-request' of https://github.com/hdeller/qemu-hppa into staging
Generated code size reduction with linux-user for hppa
Would you please consider pulling this trivial fix, which reduces
the generated code on x86 by ~3% when running linux-user with
the hppa target?
Thanks,
Helge
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZMwriQAKCRD3ErUQojoP
# X0oxAQC7HlQ4j23o4ylqbXTiZdOeY26TjWTlw38OkuSXcqgCMAD/UmwEDawEGTKv
# SuRjrASdFzpjvjDss2nreahL9hGvrAI=
# =eoAk
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Aug 2023 03:34:49 PM PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-linux-user-speedup-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Move iaoq registers and thus reduce generated code size
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On hppa the Instruction Address Offset Queue (IAOQ) registers specifies
the next to-be-executed instructions addresses. Each generated TB writes those
registers at least once, so those registers are used heavily in generated
code.
Looking at the generated assembly, for a x86-64 host this code
to write the address $0x7ffe826f into iaoq_f is generated:
0x7f73e8000184: c7 85 d4 01 00 00 6f 82 movl $0x7ffe826f, 0x1d4(%rbp)
0x7f73e800018c: fe 7f
0x7f73e800018e: c7 85 d8 01 00 00 73 82 movl $0x7ffe8273, 0x1d8(%rbp)
0x7f73e8000196: fe 7f
With the trivial change, by moving the variables iaoq_f and iaoq_b to
the top of struct CPUArchState, the offset to %rbp is reduced (from
0x1d4 to 0), which allows the x86-64 tcg to generate 3 bytes less of
generated code per move instruction:
0x7fc1e800018c: c7 45 00 6f 82 fe 7f movl $0x7ffe826f, (%rbp)
0x7fc1e8000193: c7 45 04 73 82 fe 7f movl $0x7ffe8273, 4(%rbp)
Overall this is a reduction of generated code (not a reduction of
number of instructions).
A test run with checks the generated code size by running "/bin/ls"
with qemu-user shows that the code size shrinks from 1616767 to 1569273
bytes, which is ~97% of the former size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Generally guest side should discover which services the device is
able to offer, then do requests on device.
However it's also possible to break this rule in a guest. Handle
unexpected request here to avoid NULL pointer dereference.
Fixes: e7a775fd ('cryptodev: Account statistics')
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Mauro Matteo Cascella <mcascell@redhat.com>
Cc: Xiao Lei <nop.leixiao@gmail.com>
Cc: Yongkang Jia <kangel@zju.edu.cn>
Reported-by: Yiming Tao <taoym@zju.edu.cn>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230803024314.29962-3-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For symmetric algorithms, the length of ciphertext must be as same
as the plaintext.
The missing verification of the src_len and the dst_len in
virtio_crypto_sym_op_helper() may lead buffer overflow/divulged.
This patch is originally written by Yiming Tao for QEMU-SECURITY,
resend it(a few changes of error message) in qemu-devel.
Fixes: CVE-2023-3180
Fixes: 04b9b37edda("virtio-crypto: add data queue processing handler")
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Mauro Matteo Cascella <mcascell@redhat.com>
Cc: Yiming Tao <taoym@zju.edu.cn>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230803024314.29962-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The first bitfield here is supposed to be used as a 64-bit equivalent
to the "uint64_t msi_addr" in the union. To make this work correctly
on big endian hosts, too, the __addr_hi field has to be part of the
bitfield, and the the bitfield members must be declared with "uint64_t"
instead of "uint32_t" - otherwise the values are placed in the wrong
bytes on big endian hosts.
Same applies to the 32-bit "msi_data" field: __resved1 must be part
of the bitfield, and the members must be declared with "uint32_t"
instead of "uint16_t".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-7-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
The values in "msg" are assembled in host endian byte order (the other
field are also not swapped), so we must not swap the __addr_head here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-6-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
The values in "addr" are populated locally in this function in host
endian byte order, so we must not swap the index_l field here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-5-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
On big endian hosts, we need to reverse the bitfield order in the
struct VTDInvDescIEC, just like it is already done for the other
bitfields in the various structs of the intel-iommu device.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-4-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
The code already tries to do some endianness handling here, but
currently fails badly:
- While it already swaps the data when logging errors / tracing, it fails
to byteswap the value before e.g. accessing entry->irte.present
- entry->irte.source_id is swapped with le32_to_cpu(), though this is
a 16-bit value
- The whole union is apparently supposed to be swapped via the 64-bit
data[2] array, but the struct is a mixture between 32 bit values
(the first 8 bytes) and 64 bit values (the second 8 bytes), so this
cannot work as expected.
Fix it by converting the struct to two proper 64-bit bitfields, and
by swapping the values only once for everybody right after reading
the data from memory.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-3-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
After reading the guest memory with dma_memory_read(), we have
to make sure that we byteswap the little endian data to the host's
byte order.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-2-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
When the vhost-user reconnect to the backend, the notifer should be
cleanup. Otherwise, the fd resource will be exhausted.
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt")
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20230731121018.2856310-2-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2224964
In migration with VF failover, Windows guest and ACPI hot
unplug we do not need to satisfy config requests, otherwise
the guest immediately detects the device and brings up its
driver. Many network VF's are stuck on the guest PCI bus after
the migration.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20230728084049.191454-1-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio_queue_packed_set_last_avail_idx() is used by vhost devices to set
the internal queue indices to what has been reported by the vhost
back-end through GET_VRING_BASE. For packed virtqueues, this
32-bit value is expected to contain both the device's internal avail and
used indices, as well as their respective wrap counters.
To get the used index, we shift the 32-bit value right by 16, and then
apply a mask of 0x7ffff. That seems to be a typo, because it should be
0x7fff; first of all, the virtio specification says that the maximum
queue size for packed virt queues is 2^15, so the indices cannot exceed
2^15 - 1 anyway, making 0x7fff the correct mask. Second, the mask
clearly is wrong from context, too, given that (A) `idx & 0x70000` must
be 0 at this point (`idx` is 32 bit and was shifted to the right by 16
already), (B) `idx & 0x8000` is the used_wrap_counter, so should not be
part of the used index, and (C) `vq->used_idx` is a `uint16_t`, so
cannot fit the 0x70000 part of the mask anyway.
This most likely never produced any guest-visible bugs, though, because
for a vhost device, qemu will probably not evaluate the used index
outside of virtio_queue_packed_get_last_avail_idx(), where we
reconstruct the 32-bit value from avail and used indices and their wrap
counters again. There, it does not matter whether the highest bit of
the used_idx is the used index wrap counter, because we put the wrap
counter exactly in that position anyway.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230721134945.26967-1-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20230721072820.75797-1-david.edmondson@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Expected change is that _ADR object is removed from
hostbridge descriptor in DSDT for PC and Q35 machines.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI spec (since 2.0a) says
"
A device object must contain either an _HID object or
an _ADR object, but can contain both.
"
_ADR is used when device is attached to an ennumerable bus,
however hostbridge is not and uses dedicated _HID for
discovery, drop _ADR field.
It doesn't seem that having _ADR has a negative effects
OSes manage to tolerate that, but there is no point of
having it there. (only pc/q35 has it hostbridge description,
while others (microvm/arm) don't)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following change is expected on each PCI slot with enabled
ACPI PCI hotplug
- BSEL,
- ASUN
+ Zero,
+ Zero
}
+ Local0 [Zero] = BSEL /* \_SB_.PCI0.BSEL */
+ Local0 [One] = ASUN /* \_SB_.PCI0.S18_.ASUN */
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it seems that Windows is unable to handle variable references
making it choke up when accessing ASUN during _DSM call
when device is hotplugged (it lists package elements as DataAlias
but despite that later on it misbehaves) with following error
shown up in AMLI debugger (WS2012r2):
Store(ShiftLeft(One,Arg1="ASUN",) AMLI_ERROR(c0140008): Unexpected argument type
ValidateArgTypes: expected Arg1 to be type Integer (Type=String)
Similar outcome with WS2022.
Issue is not fatal but as result acpi-index/"PCI Label ID" property
is either not shown in device details page or shows incorrect value.
Fix it by doing assignment of BSEL/ASUN values to package
elements manually after package declaration.
Fix was tested with: WS2012r2, WS2022, RHEL9
Fixes: 467d099a29 (x86: acpi: _DSM: use Package to pass parameters)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The QEMU CI fails in virtio-scmi test occasionally. As reported by
Thomas Huth, this happens most likely when the system is loaded and it
fails with the following error:
qemu-system-aarch64: ../../devel/qemu/hw/pci/msix.c:659:
msix_unset_vector_notifiers: Assertion `dev->msix_vector_use_notifier && dev->msix_vector_release_notifier' failed.
../../devel/qemu/tests/qtest/libqtest.c:200: kill_qemu() detected QEMU death from signal 6 (Aborted) (core dumped)
As discovered by Fabiano Rosas, the cause is a duplicate invocation of
msix_unset_vector_notifiers via duplicate vu_scmi_stop calls:
msix_unset_vector_notifiers
virtio_pci_set_guest_notifiers
vu_scmi_stop
vu_scmi_disconnect
...
qemu_chr_write_buffer
msix_unset_vector_notifiers
virtio_pci_set_guest_notifiers
vu_scmi_stop
vu_scmi_set_status
...
qemu_cleanup
While vu_scmi_stop calls are protected by vhost_dev_is_started()
check, it's apparently not enough. vhost-user-blk and vhost-user-gpio
use an extra protection, see f5b22d06fb (vhost: recheck dev state in
the vhost_migration_log routine) for the motivation. Let's use the
same in vhost-user-scmi, which fixes the failure above.
Fixes: a5dab090e1 ("hw/virtio: Add boilerplate for vhost-user-scmi device")
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230720101037.2161450-1-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
At several locations we compute the granule from the config
page_size_mask using ctz() and then format it in traces using
BIT(). As the page_size_mask is 64b we should use ctz64 and
BIT_ULL() for formatting. We failed to be consistent.
Note the page_size_mask is garanteed to be non null. The spec
mandates the device to set at least one bit, so ctz64 cannot
return 64. This is garanteed by the fact the device
initializes the page_size_mask to qemu_target_page_mask()
and then the page_size_mask is further constrained by
virtio_iommu_set_page_size_mask() callback which can't
result in a new mask being null. So if Coverity complains
round those ctz64/BIT_ULL with CID 1517772 this is a false
positive
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: 94df5b2180 ("virtio-iommu: Fix 64kB host page size VFIO device assignment")
Message-Id: <20230718182136.40096-1-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
In build_cdat_table() we do:
*cdat_table = g_malloc0(sizeof(*cdat_table) * CXL_USP_CDAT_NUM_ENTRIES);
This is wrong because:
- cdat_table has type CDATSubHeader ***
- so *cdat_table has type CDATSubHeader **
- so the array we're allocating here should be items of type CDATSubHeader *
- but we pass sizeof(*cdat_table), which is sizeof(CDATSubHeader **),
implying that we're allocating an array of CDATSubHeader **
It happens that sizeof(CDATSubHeader **) == sizeof(CDATSubHeader *)
so nothing blows up, but this should be sizeof(**cdat_table).
Avoid this excessively hard-to-understand code by using
g_new0() instead, which will do the type checking for us.
While we're here, we can drop the useless check against failure,
as g_malloc0() and g_new0() never fail.
This fixes Coverity issue CID 1508120.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230718101327.1111374-1-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the virtio_iommu_handle_command() when a PROBE request is handled,
output_size takes a value greater than the tail size and on a subsequent
iteration we can get a stack out-of-band access. Initialize the
output_size on each iteration.
The issue was found with ASAN. Credits to:
Yiming Tao(Zhejiang University)
Gaoning Pan(Zhejiang University)
Fixes: 1733eebb9e ("virtio-iommu: Implement RESV_MEM probe request")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Mauro Matteo Cascella <mcascell@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230717162126.11693-1-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix for an fd leak in the blkio block driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTLzf0ACgkQnKSrs4Gr
c8hoGQf+KjsuChyk8/aoDP4MMkNB1/X3nsazCd3GY3uE+DRK8ieiRJeT6chMIey/
sK3v/drkDmdjj30qbXGxjLVa5SNsP9N6pVoo8fnFJN7LmGBE/JLEYUYVNpHAKEzb
N7mgDBcTHZWKGwZsh109X5l3Cr6HR484m3qKI/49qlVuWJmp8/lDUbFJbp96I6g9
ki9W0itwOrdtebYyUDml8eE/yLOxOTWx5Q7Q+qwSiEUNCwyd7yOS1QHQbnCgKw3m
c0Qzch2Z3dT61YbMrF6j0H7M1dXXcbNFdYVeMHYYJRkeN+bz4fWcUC4HkrL6YWf5
GLIj5irTSnae4TevlYVZT+72v99QQQ==
=pQ96
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
Fix for an fd leak in the blkio block driver.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTLzf0ACgkQnKSrs4Gr
# c8hoGQf+KjsuChyk8/aoDP4MMkNB1/X3nsazCd3GY3uE+DRK8ieiRJeT6chMIey/
# sK3v/drkDmdjj30qbXGxjLVa5SNsP9N6pVoo8fnFJN7LmGBE/JLEYUYVNpHAKEzb
# N7mgDBcTHZWKGwZsh109X5l3Cr6HR484m3qKI/49qlVuWJmp8/lDUbFJbp96I6g9
# ki9W0itwOrdtebYyUDml8eE/yLOxOTWx5Q7Q+qwSiEUNCwyd7yOS1QHQbnCgKw3m
# c0Qzch2Z3dT61YbMrF6j0H7M1dXXcbNFdYVeMHYYJRkeN+bz4fWcUC4HkrL6YWf5
# GLIj5irTSnae4TevlYVZT+72v99QQQ==
# =pQ96
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Aug 2023 08:55:41 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
block/blkio: add more comments on the fd passing handling
block/blkio: close the fd when blkio_connect() fails
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As Hanna pointed out, it is not clear in the code why qemu_open()
can fail, and why blkio_set_int("fd") is not enough to discover
the `fd` property support.
Let's fix them by adding more details in the code comments.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230803082825.25293-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libblkio drivers take ownership of `fd` only after a successful
blkio_connect(), so if it fails, we are still the owners.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-id: 20230803082825.25293-2-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Fix a problem when compiling with Clang on Windows
-----BEGIN PGP SIGNATURE-----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=K5Qb
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-08-03' of https://gitlab.com/thuth/qemu into staging
* Fix timeout problems in the MSYS Gitlab CI jobs
* Fix a problem when compiling with Clang on Windows
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmTLijMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbW+OQ/5ASeu4rx6jyE8JFqRtvP6NEZ+UgQMRoCg
# NEfmSd9Y+tFewyuhLY5Pf6yUJWEljrdXp5ST6FId759l6DZ6mzQu809v427nN4Sb
# CxcwRYtoT2eEU0zhJ5ShnCXsNCl7Yyco3elWWFL3kbw4X2ooeOPkkGqQ1Tdfym8m
# /C+KVvFqFq4pnLnqMi7StylWtjYh/rAIMOw4kBDc3xU67eZiAd17+Hn9/t3Kca39
# 99A1JW0LiR0U1ZkX7R/q8YbICUtBsrPww9HmqlX7BoNy2vzr6jgKqo1dkm5QkDfK
# ZEzvS1nssb3iiavIJbO7entWMcryzAiu6LF5imbI4e5T5uwerd3RVoHCsem2mu7Q
# CUoCEYjCFYC7HTRLl80UKcbPC1tn6y6q+PGaFY0z2eJnaxHifbY0rVu3eKo/oJIb
# Ba1ltlxlXKIey6usJcEjG7ZEgYsyxtmX0KJQgjWaKvuMx2ElcEMg4J/eE57NEmW/
# srfTrUpSZwplnEX8C8wQeqmzoBvUmubLiO7Z9l8yqMHcqXxn95fybxPFGafpAziF
# hQ9Qs6YB81522V9JG6pt135vUXWA+L5UiptYc97PHZ66E2hZrfUrA1tm0lajcZI+
# GARvFLMfsNWIPPnS2iz8jMrkXtTc3xgTz2zEv2BL9s9sUH0+L6ggDY8DgbjITrjF
# hM4vUezCa7E=
# =K5Qb
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Aug 2023 04:06:27 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-08-03' of https://gitlab.com/thuth/qemu:
gitlab: disable FF_SCRIPT_SECTIONS on msys jobs
gitlab: disable optimization and debug symbols in msys build
configure: support passthrough of -Dxxx args to meson
gitlab: always populate cache for windows msys jobs
gitlab: drop $CI_PROJECT_DIR from cache path
gitlab: always use updated msys installer
gitlab: print timestamps during windows msys jobs
gitlab: remove duplication between msys jobs
util/oslib-win32: Fix compiling with Clang from MSYS2
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The FF_SCRIPT_SECTIONS=1 variable should ordinarily cause output from
each line of the job script to be presented in a collapsible section
with execution time listed.
While it works on Linux shared runners, when used with Windows runners
with PowerShell, this option does not create any sections, and actually
causes echo'ing of commands to be disabled, making it even worse to
debug the jobs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-9-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Building at -O2, adds 33% to the build time, over -O2. IOW a build that
takes 45 minutes at -O0, takes 60 minutes at -O2. Turning off debug
symbols drops it further, down to 38 minutes.
IOW, a "-O2 -g" build is 58% slower than a "-O0" build on msys in the
gitlab CI windows shared runners.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230801130403.164060-8-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This can be useful for setting some meson global options, such as the
optimization level or debug state.xs
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230801130403.164060-7-berrange@redhat.com>
[thuth: Move the help text into the section with the other --... options]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The cache is used to hold the msys installer. Even if the build phase
fails, we should still populate the cache as the installer will be
valid for next time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-6-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The gitlab cache is limited to only handle content within the
$CI_PROJECT_DIR hierarchy, and as such relative paths are always
implicitly relative to $CI_PROJECT_DIR.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We current reference an msys installer binary from mid-2022, which means
after installation, it immediately has to re-download a bunch of newer
content. This wastes precious CI time.
The msys project publishes an installer binary with a fixed URL that
always references the latest content. We cache the downloads in gitlab
though and so once downloaded we would never re-fetch the installer
leading back to the same problem.
To deal with this we also fetch the pgp signature for the installer
on every run, and compare that to the previously cached signature. If
the signature changes, we re-download the full installer.
This ensures we always have the latest installer for msys, while also
maximising use of the gitlab cache.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is hard to get visibility into where time is consumed in our Windows
msys jobs. Adding a few log console messages with the timestamp will
aid in our debugging.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Although they share a common parent, the two msys jobs still have
massive duplication in their script definitions that can easily be
collapsed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clang complains:
../util/oslib-win32.c:483:56: error: omitting the parameter name in a
function definition is a C2x extension [-Werror,-Wc2x-extensions]
win32_close_exception_handler(struct _EXCEPTION_RECORD*,
^
Fix it by adding parameter names.
Message-Id: <20230728142748.305341-4-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
