SGX EPC is enumerated through CPUID, i.e. EPC "devices" need to be
realized prior to realizing the vCPUs themselves, which occurs long
before generic devices are parsed and realized. Because of this,
do not allow 'sgx-epc' devices to be instantiated after vCPUS have
been created.
The 'sgx-epc' device is essentially a placholder at this time, it will
be fully implemented in a future patch along with a dedicated command
to create 'sgx-epc' devices.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-5-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new CONFIG_SGX for sgx support in the Qemu, and the Kconfig
default enable sgx in the i386 platform.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-32-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop abs64() and use uabs64() from host-utils, which avoids
an undefined behavior when taking abs of the most negative value.
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210910112624.72748-5-luis.pires@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PC_ROM_* definitions are only used by the PC machine,
and are irrelevant to the other architectures / machines.
Reduce their scope by moving them to hw/i386/pc.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210917185949.2244956-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since commits aa57020774 ("numa: move numa global variable
nb_numa_nodes into MachineState") and 7e721e7b10 ("numa: move
numa global variable numa_info into MachineState"), we can get
NUMA information completely from MachineState::numa_state.
Remove PCMachineState::numa_nodes and PCMachineState::node_mem,
since they are just copied from MachineState::numa_state.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20210823011254.28506-1-jingqi.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
OBJECT_CHECK(PciHostState, ..., TYPE_PCI_HOST_BRIDGE) is exactly
what the PCI_HOST_BRIDGE macro does. We can just use the macro
instead of using OBJECT_CHECK manually.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210805193431.307761-7-ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we have "acpi-pci-hotplug-with-bridge-support" PIIX4 PM property being
used for both q35 and i440fx machine types, it is better that we defined this
property string at a single place within a header file like other PIIX4
properties. We can then use this single definition at all the places that needs
it instead of duplicating the string everywhere. While at it, this change also
adds a definition for "acpi-root-pci-hotplug" PIIX4 PM property and uses
this definition at all places that were formally using the string value.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20210816083214.105740-1-ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add 6.2 machine types for arm/i440fx/q35/s390x/spapr.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arch_init.h only defines the QEMU_ARCH_* enumeration and the
arch_type global. Don't include it in files that don't use those.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210730105947.28215-8-peter.maydell@linaro.org
Commit [1] switched PCI hotplug from native to ACPI one by default.
That however breaks hotplug on following CLI that used to work:
-nodefaults -machine q35 \
-device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \
-device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2
where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT], AE_NOT_FOUND (20201113/psargs-330)
ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531)
ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531)
ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)
cause is that QEMU's ACPI hotplug never supported functions other then 0
and due to bug it was generating notification entries for not described
functions.
Technically there is no reason not to describe cold-plugged bridges
(root ports) on functions other then 0, as they similarly to bridge
on function 0 are unpluggable.
So since we need to describe multifunction devices iterate over
fuctions as well. But describe only cold-plugged bridges[root ports]
on functions other than 0 as well.
1)
Fixes: 17858a1695 (hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20210723090424.2092226-1-imammedo@redhat.com>
Fixes: 17858a1695 (hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35)<br>
Signed-off-by: Igor Mammedov <<a href="mailto:imammedo@redhat.com" target="_blank">imammedo@redhat.com</a>><br>
Reported-by: Laurent Vivier <<a href="mailto:lvivier@redhat.com" target="_blank">lvivier@redhat.com</a>><br>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When building the 'microvm' machine stand-alone we get:
$ qemu-system-x86_64 -M microvm
**
ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL)
Bail out! ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL)
Aborted (core dumped)
Looking at the backtrace:
(gdb) bt
#3 0x00007ff2330492ff in g_assertion_message_expr () at /lib64/libglib-2.0.so.0
#4 0x000055a878c18341 in object_new_with_type (type=<optimized out>) at qom/object.c:714
#5 0x000055a878c18399 in object_new (typename=typename@entry=0x55a878dec36a "isa-pit") at qom/object.c:747
#6 0x000055a878cc8146 in qdev_new (name=name@entry=0x55a878dec36a "isa-pit") at hw/core/qdev.c:153
#7 0x000055a878a8b439 in isa_new (name=name@entry=0x55a878dec36a "isa-pit") at hw/isa/isa-bus.c:160
#8 0x000055a878adb782 in i8254_pit_init (base=64, isa_irq=0, alt_irq=0x0, bus=0x55a87ab38760) at include/hw/timer/i8254.h:54
#9 microvm_devices_init (mms=0x55a87ac36800) at hw/i386/microvm.c:263
#10 microvm_machine_state_init (machine=<optimized out>) at hw/i386/microvm.c:471
#11 0x000055a878a944ab in machine_run_board_init (machine=machine@entry=0x55a87ac36800) at hw/core/machine.c:1239
The "isa-pit" type (TYPE_I8254) is missing. Add it.
Fixes: 0ebf007dda ("hw/i386: Introduce the microvm machine type")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210616204328.2611406-24-philmd@redhat.com>
Check bypass_iommu to exclude the devices which will bypass iommu.
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1625748919-52456-9-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In DMAR table, the drhd is set to cover all PCI devices when intel_iommu
is on. To support bypass iommu feature, we need to walk the PCI bus with
bypass_iommu disabled and add explicit scope data in DMAR drhd structure.
/mnt/sdb/wxg/qemu-next/qemu/build/x86_64-softmmu/qemu-system-x86_64 \
-machine q35,accel=kvm,default_bus_bypass_iommu=true \
-cpu host \
-m 16G \
-smp 36,sockets=2,cores=18,threads=1 \
-device pxb-pcie,bus_nr=0x10,id=pci.10,bus=pcie.0,addr=0x3 \
-device pxb-pcie,bus_nr=0x20,id=pci.20,bus=pcie.0,addr=0x4,bypass_iommu=true \
-device pcie-root-port,port=0x1,chassis=1,id=pci.11,bus=pci.10,addr=0x0 \
-device pcie-root-port,port=0x2,chassis=2,id=pci.21,bus=pci.20,addr=0x0 \
-device virtio-scsi-pci,id=scsi0,bus=pci.11,addr=0x0 \
-device virtio-scsi-pci,id=scsi1,bus=pci.21,addr=0x0 \
-drive file=/mnt/sdb/wxg/fedora-48g.qcow2,format=qcow2,if=none,id=drive-scsi0-0-0-0,cache=none,aio=native \
-device scsi-hd,bus=scsi1.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1 \
-device intel-iommu \
-nographic \
And we get the guest configuration:
~ lspci -vt
-+-[0000:20]---00.0-[21]----00.0 Red Hat, Inc. Virtio SCSI
+-[0000:10]---00.0-[11]----00.0 Red Hat, Inc. Virtio SCSI
\-[0000:00]-+-00.0 Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
+-01.0 Device 1234:1111
+-02.0 Intel Corporation 82574L Gigabit Network Connection
+-03.0 Red Hat, Inc. QEMU PCIe Expander bridge
+-04.0 Red Hat, Inc. QEMU PCIe Expander bridge
+-1f.0 Intel Corporation 82801IB (ICH9) LPC Interface Controller
+-1f.2 Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode]
\-1f.3 Intel Corporation 82801I (ICH9 Family) SMBus Controller
With bypass_iommu enabled on root bus, the attached devices will bypass iommu:
/sys/class/iommu/dmar0
├── devices
│ ├── 0000:10:00.0 -> ../../../../pci0000:10/0000:10:00.0
│ └── 0000:11:00.0 -> ../../../../pci0000:10/0000:10:00.0/0000:11:00.0
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1625748919-52456-8-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a default_bus_bypass_iommu pc machine option to enable/disable
bypass_iommu for default root bus. The option is disabled by default
and can be enabled with:
$QEMU -machine q35,default_bus_bypass_iommu=true
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1625748919-52456-5-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Q35 has three different types of PCI devices hot-plug: PCIe Native,
SHPC Native and ACPI hot-plug. This patch changes the default choice
for cold-plugged bridges from PCIe Native to ACPI Hot-plug with
ability to use SHPC and PCIe Native for hot-plugged bridges.
This is a list of the PCIe Native hot-plug issues that led to this
change:
* no racy behavior during boot (see 110c477c2e)
* no delay during deleting - after the actual power off software
must wait at least 1 second before indicating about it. This case
is quite important for users, it even has its own bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1594168
* no timer-based behavior - in addition to the previous example,
the attention button has a 5-second waiting period, during which
the operation can be canceled with a second press. While this
looks fine for manual button control, automation will result in
the need to queue or drop events, and the software receiving
events in all sort of unspecified combinations of attention/power
indicator states, which is racy and uppredictable.
* fixes:
* https://bugzilla.redhat.com/show_bug.cgi?id=1752465
* https://bugzilla.redhat.com/show_bug.cgi?id=1690256
To return to PCIe Native hot-plug:
-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off
Known issue: older linux guests need the following flag
to allow hotplugged pci express devices to use io:
-device pcie-root-port,io-reserve=4096.
io is unusual for pci express so this seems minor.
We'll fix this by a follow up patch.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210713004205.775386-6-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Instead of changing the hot-plug type in _OSC register, do not
set the 'Hot-Plug Capable' flag. This way guest will choose ACPI
hot-plug if it is preferred and leave the option to use SHPC with
pcie-pci-bridge.
The ability to control hot-plug for each downstream port is retained,
while 'hotplug=off' on the port means all hot-plug types are disabled.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210713004205.775386-4-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add acpi_pcihp to ich9_pm as part of
'acpi-pci-hotplug-with-bridge-support' option. Set default to false.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210713004205.775386-3-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Implement notifications and gpe to support q35 ACPI PCI hot-plug.
Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20210713004205.775386-2-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Introduce the X86_FW_OVMF Kconfig symbol for OVMF-specific code.
Move the OVMF-specific code from pc_sysfw.c to pc_sysfw_ovmf.c,
adding a pair of stubs.
Update MAINTAINERS to reach OVMF maintainers when these new
files are modified.
This fixes when building the microvm machine standalone:
/usr/bin/ld: libqemu-i386-softmmu.fa.p/target_i386_monitor.c.o: in
function `qmp_sev_inject_launch_secret':
target/i386/monitor.c:749: undefined reference to `pc_system_ovmf_table_find'
Fixes: f522cef9b3 ("sev: update sev-inject-launch-secret to make gpa optional")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210616204328.2611406-22-philmd@redhat.com>
Add assertion in pc_system_ovmf_table_find that verifies that the flash
was indeed previously parsed (looking for the OVMF table) by
pc_system_parse_ovmf_flash.
Now pc_system_ovmf_table_find distinguishes between "no one called
pc_system_parse_ovmf_flash" (which will abort due to assertion failure)
and "the flash was parsed but no OVMF table was found, or it is invalid"
(which will return false).
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210701052749.934744-2-dovmurik@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently all built-in CPUs report cache information via CPUID leaves 2
and 4, but these have never been defined for AMD. In the case of
SEV-SNP this can cause issues with CPUID enforcement. Address this by
allowing CPU types to suppress these via a new "x-vendor-cpuid-only"
CPU property, which is true by default, but switched off for older
machine types to maintain compatibility.
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: zhenwei pi <pizhenwei@bytedance.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20210708003623.18665-1-michael.roth@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Commit [1] moved _SUN variable from only hot-pluggable to
all devices. This made linux kernel enumerate extra slots
that weren't present before. If extra slot happens to be
be enumerated first and there is a device in th same slot
but on other bridge, linux kernel will add -N suffix to
slot name of the later, thus changing NIC name compared to
QEMU 5.2. This in some case confuses systemd, if it is
using SLOT NIC naming scheme and interface name becomes
not the same as it was under QEMU-5.2.
Reproducer QEMU CLI:
-M pc-i440fx-5.2 -nodefaults \
-device pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x3 \
-device virtio-net-pci,id=nic1,bus=pci.1,addr=0x1 \
-device virtio-net-pci,id=nic2,bus=pci.1,addr=0x2 \
-device virtio-net-pci,id=nic3,bus=pci.1,addr=0x3
with RHEL8 guest produces following results:
v5.2:
kernel: virtio_net virtio0 ens1: renamed from eth0
kernel: virtio_net virtio2 ens3: renamed from eth2
kernel: virtio_net virtio1 enp1s2: renamed from eth1
(slot 2 is assigned to empty bus 0 slot and virtio1
is assigned to 2-2 slot, and renaming falls back,
for some reason, to path based naming scheme)
v6.0:
kernel: virtio_net virtio0 ens1: renamed from eth0
kernel: virtio_net virtio2 ens3: renamed from eth2
systemd-udevd[299]: Error changing net interface name 'eth1' to 'ens3': File exists
systemd-udevd[299]: could not rename interface '3' from 'eth1' to 'ens3': File exists
(with commit [1] kernel assigns virtio2 to 3-2 slot
since bridge advertises _SUN=0x3 and kernel assigns
slot 3 to bridge. Still it manages to rename virtio2
correctly to ens3, however systemd gets confused with virtio1
where slot allocation exactly the same (2-2) as in 5.2 case
and tries to rename it to ens3 which is rightfully taken by
virtio2)
I'm not sure what breaks in systemd interface renaming (it probably
should be investigated), but on QEMU side we can safely revert
_SUN to 5.2 behavior (i.e. avoid cold-plugged bridges and non
hot-pluggable device classes), without breaking acpi-index, which uses
slot numbers but it doesn't have to use _SUN, it could use an arbitrary
variable name that has the same slot value).
It will help existing VMs to keep networking with non trivial
configs in working order since systemd will do its interface
renaming magic as it used to do.
1)
Fixes: b7f23f62e4 (pci: acpi: add _DSM method to PCI devices)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210624204229.998824-3-imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: John Sucaet <john.sucaet@ekinops.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As part of converting -smp to a property with a QAPI type, define
the struct and use it to do the actual parsing. machine_smp_parse
takes care of doing the QemuOpts->QAPI conversion by hand, for now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the smp_parse functions to use Error** instead of exiting.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of smp_parse and pc_smp_parse is guarded by an "if (opts)"
conditional, and the rest is common to both function. Move the
conditional and the common code to the caller, machine_smp_parse.
Move the replay_add_blocker call after all errors are checked for.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to make SMP configuration a Machine property, we need a getter as
well as a setter. To simplify the implementation put everything that the
getter needs in the CpuTopology struct.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the ISA code.
Extract the ISA specific code to a new unit: fdc-isa.c, and
add a new Kconfig symbol: "FDC_ISA".
This allows us to remove the FIXME from commit dd0ff8191a
("isa: express SuperIO dependencies with Kconfig").
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-5-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A bus lock is acquired through either split locked access to writeback
(WB) memory or any locked access to non-WB memory. It is typically >1000
cycles slower than an atomic operation within a cache and can also
disrupts performance on other cores.
Virtual Machines can exploit bus locks to degrade the performance of
system. To address this kind of performance DOS attack coming from the
VMs, bus lock VM exit is introduced in KVM and it can report the bus
locks detected in guest. If enabled in KVM, it would exit to the
userspace to let the user enforce throttling policies once bus locks
acquired in VMs.
The availability of bus lock VM exit can be detected through the
KVM_CAP_X86_BUS_LOCK_EXIT. The returned bitmap contains the potential
policies supported by KVM. The field KVM_BUS_LOCK_DETECTION_EXIT in
bitmap is the only supported strategy at present. It indicates that KVM
will exit to userspace to handle the bus locks.
This patch adds a ratelimit on the bus locks acquired in guest as a
mitigation policy.
Introduce a new field "bus_lock_ratelimit" to record the limited speed
of bus locks in the target VM. The user can specify it through the
"bus-lock-ratelimit" as a machine property. In current implementation,
the default value of the speed is 0 per second, which means no
restrictions on the bus locks.
As for ratelimit on detected bus locks, simply set the ratelimit
interval to 1s and restrict the quota of bus lock occurence to the value
of "bus_lock_ratelimit". A potential alternative is to introduce the
time slice as a property which can help the user achieve more precise
control.
The detail of bus lock VM exit can be found in spec:
https://software.intel.com/content/www/us/en/develop/download/intel-architecture-instruction-set-extensions-programming-reference.html
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210521043820.29678-1-chenyi.qiang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210614191335.1968807-2-stefanb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Headers should be included from the 'include/' directory,
not from the root directory.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210516205034.694788-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Bump minimum versions of some requirements after removing CentOS 7 support
-----BEGIN PGP SIGNATURE-----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=RAkI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging
* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versions of some requirements after removing CentOS 7 support
# gpg: Signature made Wed 02 Jun 2021 08:12:18 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-06-02:
configure: bump min required CLang to 6.0 / XCode 10.0
configure: bump min required GCC to 7.5.0
configure: bump min required glib version to 2.56
tests/docker: drop CentOS 7 container
tests/vm: convert centos VM recipe to CentOS 8
crypto: drop used conditional check
crypto: bump min gnutls to 3.5.18, dropping RHEL-7 support
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
crypto: drop back compatibility typedefs for nettle
crypto: bump min nettle to 3.4, dropping RHEL-7 support
patchew: move quick build job from CentOS 7 to CentOS 8 container
block/ssh: Bump minimum libssh version to 0.8.7
docs: fix references to docs/devel/s390-dasd-ipl.rst
docs: fix references to docs/specs/tpm.rst
docs: fix references to docs/devel/build-system.rst
docs: fix references to docs/devel/atomics.rst
docs: fix references to docs/devel/tracing.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'qemu64' CPUID currently reports a family/model/stepping that
approximately corresponds to an AMD K7 vintage architecture.
The K7 series predates the introduction of 64-bit support by AMD
in the K8 series. This has been reported to lead to LLVM complaints
about generating 64-bit code for a 32-bit CPU target
LLVM ERROR: 64-bit code requested on a subtarget that doesn't support it!
It appears LLVM looks at the family/model/stepping, despite qemu64
reporting it is 64-bit capable.
This patch changes 'qemu64' to report a CPUID with the family, model
and stepping taken from a
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+
which is one of the first 64-bit AMD CPUs.
Closes https://gitlab.com/qemu-project/qemu/-/issues/191
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210507133650.645526-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Per the kconfig.rst:
A device should be listed [...] ``imply`` if (depending on
the QEMU command line) the board may or may not be started
without it.
This is the case with the NVDIMM device, so use the 'imply'
weak reverse dependency to select the symbol.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210511155354.3069141-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCeiMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpqsIH/A49Av5Bv8huL75lf9GzCx3E1a/z2W9Fphik
OcQ1ahR+7CRDARub+vTG40MBmZBVefIWjLAj3BwBWzFGPX0DZq0zeI102VzlEVKY
OeUx8ixuiKOSLcS+QxE7ZXIBL2Pn7l+MFUi4nLMYKti7c/kola7zlB57qsmXh+VD
AOQ7Utj6NWoi6QocWJsMSCyHCh3Fk9QzcStLlr6/MkSJa1zqv8l22+8oWH07Fk2M
wZfhrm9k094on28iSejsFYL5e4ROeXUajbOdfyMIxWvAB7boC9Jxk/e0oAbuSB4y
2f71Gfk3mU6irS7PvrxcKbk6BVD2zxM2WumOchZJgxFAujDO6yg=
=fvkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: bugfixes, improvements
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/virt.c
Type 41 defines the attributes of devices that are onboard. The
original intent was to imply the BIOS had some level of control over
the enablement of the associated devices.
If network devices are present in this table, by default, udev will
name the corresponding interfaces enoX, X being the instance number.
Without such information, udev will fallback to using the PCI ID and
this usually gives ens3 or ens4. This can be a bit annoying as the
name of the network card may depend on the order of options and may
change if a new PCI device is added earlier on the commande line.
Being able to provide SMBIOS type 41 entry ensure the name of the
interface won't change and helps the user guess the right name without
booting a first time.
This can be invoked with:
$QEMU -netdev user,id=internet
-device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \
-smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev
The PCI segment is assumed to be 0. This should hold true for most
cases.
$ dmidecode -t 41
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x2900, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard LAN
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:09.0
$ ip -brief a
lo UNKNOWN 127.0.0.1/8 ::1/128
eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Message-Id: <20210401171138.62970-1-vincent@bernat.ch>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Address was swapped with value when writing MMIO registers, so the user
saw garbage in lot of cases. The interrupt status was not correctly set.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-Id: <20210427110504.10878-1-rka@sysgo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ram block notifiers are currently not aware of resizes. To properly
handle resizes during migration, we want to teach ram block notifiers about
resizeable ram.
Introduce the basic infrastructure but keep using max_size in the
existing notifiers. Supply the max_size when adding and removing ram
blocks. Also, notify on resizes.
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: xen-devel@lists.xenproject.org
Cc: haxm-team@intel.com
Cc: Paul Durrant <paul@xen.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Wenchao Wang <wenchao.wang@intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-3-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCblEEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroObnQgAj10pRDODY9hIiUiYj2sTcEQTly3p
DC+ZWDaup67z3WV2C/vAS/x31RGIus+7bzji3fgtUcnGOr7sbuOCcs7CPY8mam5Y
GMPNrsUk2sZ5z9SVTq2vjEa61tjxtMpYXx9pnhgJzJAO4NJzNuX74ZdpA+oV5aTC
CvZDk8lC7BLU16MfeLcbw44xE4Oy05wWwaoP2pvhdOg47y85t/S9Il1yBCYi3y8C
pTOBBCYmHGPj/r7i4MhUGrAjIyGQu1w7av8nZXouRegoeVl28RKR8+pl7TfFpt+E
cp95yE8dPuNFJnCiZ3Kv01eBcSUcyp4gVb5H2Oa/nkkYRLpnONbUzYFtIA==
=zR5U
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* AccelCPUClass and sysemu/user split for i386 (Claudio)
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
# gpg: Signature made Wed 12 May 2021 09:39:29 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (32 commits)
coverity-scan: list components, move model to scripts/coverity-scan
configure: fix detection of gdbus-codegen
qemu-option: support accept-any QemuOptsList in qemu_opts_absorb_qdict
main-loop: remove dead code
target/i386: use mmu_translate for NPT walk
target/i386: allow customizing the next phase of the translation
target/i386: extend pg_mode to more CR0 and CR4 bits
target/i386: pass cr3 to mmu_translate
target/i386: extract mmu_translate
target/i386: move paging mode constants from SVM to cpu.h
target/i386: merge SVM_NPTEXIT_* with PF_ERROR_* constants
accel: add init_accel_cpu for adapting accel behavior to CPU type
accel: move call to accel_init_interfaces
i386: make cpu_load_efer sysemu-only
target/i386: gdbstub: only write CR0/CR2/CR3/EFER for sysemu
target/i386: gdbstub: introduce aux functions to read/write CS64 regs
i386: split off sysemu part of cpu.c
i386: split seg_helper into user-only and sysemu parts
i386: split svm_helper into sysemu and stub-only user
i386: separate fpu_helper sysemu-only parts
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
i386 is the first user of AccelCPUClass, allowing to split
cpu.c into:
cpu.c cpuid and common x86 cpu functionality
host-cpu.c host x86 cpu functions and "host" cpu type
kvm/kvm-cpu.c KVM x86 AccelCPUClass
hvf/hvf-cpu.c HVF x86 AccelCPUClass
tcg/tcg-cpu.c TCG x86 AccelCPUClass
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio]:
Rebased on commit b8184135 ("target/i386: allow modifying TCG phys-addr-bits")
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210322132800.7470-5-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because Coverity complains about it and this is one leak that Valgrind
reports.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20210430163742.469739-1-anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
When we're replacing the existing mapping there is possibility of a race
on memory map with other threads doing mmap operations - the address being
unmapped/re-mapped could be occupied by another thread in between.
Linux mmap man page recommends keeping the existing mappings in place to
reserve the place and instead utilize the fact that the next mmap operation
with MAP_FIXED flag passed will implicitly destroy the existing mappings
behind the chosen address. This behavior is guaranteed by POSIX / BSD and
therefore is portable.
Note that it wouldn't make the replacement atomic for parallel accesses to
the replaced region - those might still fail with SIGBUS due to
xenforeignmemory_map not being atomic. So we're still not expecting those.
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <1618889702-13104-1-git-send-email-igor.druzhinin@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Do the same as in commit
(4d027afeb3 Virt: ACPI: fix qemu assert due to re-assigned table data address)
for remaining tables that happen to use saved at
the beginning pointer to build header to avoid assert
when table_data is relocated due to implicit re-size.
In this case user is trying to start Windows 10 and getting assert at
hw/acpi/bios-linker-loader.c:239:
bios_linker_loader_add_checksum: Assertion `start_offset < file->blob->len' failed.
Fixes: https://bugs.launchpad.net/bugs/1923497
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210414084356.3792113-1-imammedo@redhat.com>
Cc: mst@redhat.com, qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
AMD IOMMU PTEs have a special mode allowing to specify an arbitrary page
size. Quoting the AMD IOMMU specification: "When the Next Level bits [of
a pte] are 7h, the size of the page is determined by the first zero bit
in the page address, starting from bit 12."
So if the lowest bits of the page address is 0, the page is 8kB. If the
lowest bits are 011, the page is 32kB. Currently pte_override_page_mask()
doesn't compute the right value for this page size and amdvi_translate()
can return the wrong guest-physical address. With a Linux guest, DMA
from SATA devices accesses the wrong memory and causes probe failure:
qemu-system-x86_64 ... -device amd-iommu -drive id=hd1,file=foo.bin,if=none \
-device ahci,id=ahci -device ide-hd,drive=hd1,bus=ahci.0
[ 6.613093] ata1.00: qc timeout (cmd 0xec)
[ 6.615062] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Fix the page mask.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20210421084007.1190546-1-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including hw/boards.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-3-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include hw/irq.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210327050236.2232347-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The code that sets/gets oem fields is duplicated in both PC and MICROVM
variants. This commit moves it to X86MachineState so that all x86
variants can use it and duplication is removed.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Message-Id: <20210221001737.24499-2-posteuca@mutex.one>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We want to have safety margins for all tables based on the table type.
Let's move the maximum size logic into acpi_add_rom_blob() and make it
dependent on the table name, so we don't have to replicate for each and
every instance that creates such tables.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-4-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's just reuse ACPI_BUILD_LOADER_FILE.
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-3-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The resizeable memory region / RAMBlock that is created for the cmd blob
has a maximum size of whole host pages (e.g., 4k), because RAMBlocks
work on full host pages. In addition, in i386 ACPI code:
acpi_align_size(tables->linker->cmd_blob, ACPI_BUILD_ALIGN_SIZE);
makes sure to align to multiples of 4k, padding with 0.
For example, if our cmd_blob is created with a size of 2k, the maximum
size is 4k - we cannot grow beyond that. Growing might be required
due to guest action when rebuilding the tables, but also on incoming
migration.
This automatic generation of the maximum size used to be sufficient,
however, there are cases where we cross host pages now when growing at
runtime: we exceed the maximum size of the RAMBlock and can crash QEMU when
trying to resize the resizeable memory region / RAMBlock:
$ build/qemu-system-x86_64 --enable-kvm \
-machine q35,nvdimm=on \
-smp 1 \
-cpu host \
-m size=2G,slots=8,maxmem=4G \
-object memory-backend-file,id=mem0,mem-path=/tmp/nvdimm,size=256M \
-device nvdimm,label-size=131072,memdev=mem0,id=nvdimm0,slot=1 \
-nodefaults \
-device vmgenid \
-device intel-iommu
Results in:
Unexpected error in qemu_ram_resize() at ../softmmu/physmem.c:1850:
qemu-system-x86_64: Size too large: /rom@etc/table-loader:
0x2000 > 0x1000: Invalid argument
In this configuration, we consume exactly 4k (32 entries, 128 bytes each)
when creating the VM. However, once the guest boots up and maps the MCFG,
we also create the MCFG table and end up consuming 2 additional entries
(pointer + checksum) -- which is where we try resizing the memory region
/ RAMBlock, however, the maximum size does not allow for it.
Currently, we get the following maximum sizes for our different
mutable tables based on behavior of resizeable RAMBlock:
hw table max_size
------- ---------------------------------------------------------
virt "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
virt "etc/table-loader" HOST_PAGE_ALIGN(initial_size)
virt "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size)
i386 "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
i386 "etc/table-loader" HOST_PAGE_ALIGN(initial_size)
i386 "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size)
microvm "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
microvm "etc/table-loader" HOST_PAGE_ALIGN(initial_size)
microvm "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size)
Let's set the maximum table size for "etc/table-loader" to 64k, so we
can properly grow at runtime, which should be good enough for the future.
Migration is not concerned with the maximum size of a RAMBlock, only
with the used size - so existing setups are not affected. Of course, we
cannot migrate a VM that would have crash when started on older QEMU from
new QEMU to older QEMU without failing early on the destination when
synchronizing the RAM state:
qemu-system-x86_64: Size too large: /rom@etc/table-loader: 0x2000 > 0x1000: Invalid argument
qemu-system-x86_64: error while loading state for instance 0x0 of device 'ram'
qemu-system-x86_64: load of migration failed: Invalid argument
We'll refactor the code next, to make sure we get rid of this implicit
behavior for "etc/acpi/rsdp" as well and to make the code easier to
grasp.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-2-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement _DSM according to:
PCI Firmware Specification 3.1
4.6.7. DSM for Naming a PCI or PCI Express Device Under
Operating Systems
and wire it up to cold and hot-plugged PCI devices.
Feature depends on ACPI hotplug being enabled (as that provides
PCI devices descriptions in ACPI and MMIO registers that are
reused to fetch acpi-index).
acpi-index should work for
- cold plugged NICs:
$QEMU -device e1000,acpi-index=100
=> 'eno100'
- hot-plugged
(monitor) device_add e1000,acpi-index=200,id=remove_me
=> 'eno200'
- re-plugged
(monitor) device_del remove_me
(monitor) device_add e1000,acpi-index=1
=> 'eno1'
Windows also sees index under "PCI Label Id" field in properties
dialog but otherwise it doesn't seem to have any effect.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In x86/ACPI world, linux distros are using predictable
network interface naming since systemd v197. Which on
QEMU based VMs results into path based naming scheme,
that names network interfaces based on PCI topology.
With itm on has to plug NIC in exactly the same bus/slot,
which was used when disk image was first provisioned/configured
or one risks to loose network configuration due to NIC being
renamed to actually used topology.
That also restricts freedom to reshape PCI configuration of
VM without need to reconfigure used guest image.
systemd also offers "onboard" naming scheme which is
preferred over PCI slot/topology one, provided that
firmware implements:
"
PCI Firmware Specification 3.1
4.6.7. DSM for Naming a PCI or PCI Express Device Under
Operating Systems
"
that allows to assign user defined index to PCI device,
which systemd will use to name NIC. For example, using
-device e1000,acpi-index=100
guest will rename NIC to 'eno100', where 'eno' is default
prefix for "onboard" naming scheme. This doesn't require
any advance configuration on guest side to com in effect
at 'onboard' scheme takes priority over path based naming.
Hope is that 'acpi-index' it will be easier to consume by
management layer, compared to forcing specific PCI topology
and/or having several disk image templates for different
topologies and will help to simplify process of spawning
VM from the same template without need to reconfigure
guest NIC.
This patch adds, 'acpi-index'* property and wires up
a 32bit register on top of pci hotplug register block
to pass index value to AML code at runtime.
Following patch will add corresponding _DSM code and
wire it up to PCI devices described in ACPI.
*) name comes from linux kernel terminology
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'scsi-hd' and 'scsi-cd' devices provide suitable alternatives.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'ide-hd' and 'ide-cd' devices provide suitable alternatives.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently get_naturally_aligned_size() is used by the intel iommu
to compute the maximum invalidation range based on @size which is
a power of 2 while being aligned with the @start address and less
than the maximum range defined by @gaw.
This helper is also useful for other iommu devices (virtio-iommu,
SMMUv3) to make sure IOMMU UNMAP notifiers only are called with
power of 2 range sizes.
Let's move this latter into dma-helpers.c and rename it into
dma_aligned_pow2_mask(). Also rewrite the helper so that it
accomodates UINT64_MAX values for the size mask and max mask.
It now returns a mask instead of a size. Change the caller.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 20210309102742.30442-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With -Werror=maybe-uninitialized configuration we get
../hw/i386/intel_iommu.c: In function ‘vtd_context_device_invalidate’:
../hw/i386/intel_iommu.c:1888:10: error: ‘mask’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
1888 | mask = ~mask;
| ~~~~~^~~~~~~
Add a g_assert_not_reached() to avoid the error.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210309102742.30442-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There are 23 files that include the "sysemu/qtest.h",
but they do not use any qtest functions.
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When loading the PVH start address from a 32 bit ELF note, extract
only the appropriate number of bytes.
Fixes: ab969087da ("pvh: Boot uncompressed kernel using direct boot ABI")
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210302090315.3031492-3-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After fixing the _UID value for the primary PCI root bridge in
af1b80ae it was discovered that this change updates Windows
configuration in an incompatible way causing network configuration
failure unless DHCP is used. More details provided on the list:
https://lists.gnu.org/archive/html/qemu-devel/2021-02/msg08484.html
This change reverts the _UID update from 1 to 0 for q35 and i440fx
VMs before version 5.2 to maintain the original behaviour when
upgrading.
Cc: qemu-stable@nongnu.org
Cc: qemu-devel@nongnu.org
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru>
Message-Id: <20210301195919.9333-1-cheptsov@ispras.ru>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: af1b80ae56 ("i386/acpi: fix inconsistent QEMU/OVMF device paths")
Declare PNP0C01 device to reserve MMCONFIG region to conform to the
spec better and play nice with guest BIOSes/OSes.
According to PCI Firmware Specification[0], MMCONFIG region must be
reserved by declaring a motherboard resource. It's optional to reserve
the region in memory map by Int 15 E820h or EFIGetMemoryMap.
Guest Linux checks if the MMCFG region is reserved by bios memory map
or ACPI resource. If it's not reserved, Linux falls back to legacy PCI
configuration access.
TDVF [1] [2] doesn't reserve MMCONFIG the region in memory map.
On the other hand OVMF reserves it in memory map without declaring a
motherboard resource. With memory map reservation, linux guest uses
MMCONFIG region. However it doesn't comply to PCI Firmware
specification.
[0] PCI Firmware specification Revision 3.2
4.1.2 MCFG Table Description table 4-2 NOTE 2
If the operating system does not natively comprehend reserving the
MMCFG region, The MMCFG region must e reserved by firmware. ...
For most systems, the mortheroard resource would appear at the root
of the ACPI namespace (under \_SB)...
The resource can optionally be returned in Int15 E820h or
EFIGetMemoryMap as reserved memory but must always be reported
through ACPI as a motherboard resource
[1] TDX: Intel Trust Domain Extension
https://software.intel.com/content/www/us/en/develop/articles/intel-trust-domain-extensions.html
[2] TDX Virtual Firmware
https://github.com/tianocore/edk2-staging/tree/TDVF
The change to DSDT is as follows.
@@ -68,32 +68,47 @@
If ((CDW3 != Local0))
{
CDW1 |= 0x10
}
CDW3 = Local0
}
Else
{
CDW1 |= 0x04
}
Return (Arg3)
}
}
+
+ Device (DRAC)
+ {
+ Name (_HID, "PNP0C01" /* System Board */) // _HID: Hardware ID
+ Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ {
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
+ 0x00000000, // Granularity
+ 0xB0000000, // Range Minimum
+ 0xBFFFFFFF, // Range Maximum
+ 0x00000000, // Translation Offset
+ 0x10000000, // Length
+ ,, , AddressRangeMemory, TypeStatic)
+ })
+ }
}
Scope (_SB)
{
Device (HPET)
{
Name (_HID, EisaId ("PNP0103") /* HPET System Timer */) // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
OperationRegion (HPTM, SystemMemory, 0xFED00000, 0x0400)
Field (HPTM, DWordAcc, Lock, Preserve)
{
VEND, 32,
PRD, 32
}
Method (_STA, 0, NotSerialized) // _STA: Status
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <6f686b45ce7bc43048c56dbb46e72e1fe51927e6.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
The category of the vmmouse device is not set, put it into the 'input'
category.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201130083630.2520597-4-ganqixin@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
'drivers_blacklisted' is never accessed, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20210202155644.998812-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When SEV-ES is enabled, it is not possible modify the guests register
state after it has been initially created, encrypted and measured.
Normally, an INIT-SIPI-SIPI request is used to boot the AP. However, the
hypervisor cannot emulate this because it cannot update the AP register
state. For the very first boot by an AP, the reset vector CS segment
value and the EIP value must be programmed before the register has been
encrypted and measured. Search the guest firmware for the guest for a
specific GUID that tells Qemu the value of the reset vector to use.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <22db2bfb4d6551aed661a9ae95b4fdbef613ca21.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OVMF is developing a mechanism for depositing a GUIDed table just
below the known location of the reset vector. The table goes
backwards in memory so all entries are of the form
<data>|len|<GUID>
Where <data> is arbtrary size and type, <len> is a uint16_t and
describes the entire length of the entry from the beginning of the
data to the end of the guid.
The foot of the table is of this form and <len> for this case
describes the entire size of the table. The table foot GUID is
defined by OVMF as 96b582de-1fb2-45f7-baea-a366c55a082d and if the
table is present this GUID is just below the reset vector, 48 bytes
before the end of the firmware file.
Add a parser for the ovmf reset block which takes a copy of the block,
if the table foot guid is found, minus the footer and a function for
later traversal to return the data area of any specified GUIDs.
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210204193939.16617-2-jejb@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When AMD's SEV memory encryption is in use, flash memory banks (which are
initialed by pc_system_flash_map()) need to be encrypted with the guest's
key, so that the guest can read them.
That's abstracted via the kvm_memcrypt_encrypt_data() callback in the KVM
state.. except, that it doesn't really abstract much at all.
For starters, the only call site is in code specific to the 'pc'
family of machine types, so it's obviously specific to those and to
x86 to begin with. But it makes a bunch of further assumptions that
need not be true about an arbitrary confidential guest system based on
memory encryption, let alone one based on other mechanisms:
* it assumes that the flash memory is defined to be encrypted with the
guest key, rather than being shared with hypervisor
* it assumes that that hypervisor has some mechanism to encrypt data into
the guest, even though it can't decrypt it out, since that's the whole
point
* the interface assumes that this encrypt can be done in place, which
implies that the hypervisor can write into a confidential guests's
memory, even if what it writes isn't meaningful
So really, this "abstraction" is actually pretty specific to the way SEV
works. So, this patch removes it and instead has the PC flash
initialization code call into a SEV specific callback.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
gcc is not smart enough to figure out length was validated before use as
strncpy limit, resulting in this warning:
inlined from ‘virt_set_oem_table_id’ at ../../hw/arm/virt.c:2197:5:
/usr/include/aarch64-linux-gnu/bits/string_fortified.h:106:10: error:
‘__builtin_strncpy’ specified bound depends on the length of the
source argument [-Werror=stringop-overflow=]
Simplify things by using a constant limit instead.
Fixes: 97fc5d507fca ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu's ACPI table generation sets the fields OEM ID and OEM table ID
to "BOCHS " and "BXPCxxxx" where "xxxx" is replaced by the ACPI
table name.
Some games like Red Dead Redemption 2 seem to check the ACPI OEM ID
and OEM table ID for the strings "BOCHS" and "BXPC" and if they are
found, the game crashes(this may be an intentional detection
mechanism to prevent playing the game in a virtualized environment).
This patch allows you to override these default values.
The feature can be used in this manner:
qemu -machine oem-id=ABCDEF,oem-table-id=GHIJKLMN
The oem-id string can be up to 6 bytes in size, and the
oem-table-id string can be up to 8 bytes in size. If the string are
smaller than their respective sizes they will be padded with space.
If either of these parameters is not set, the current default values
will be used for the one missing.
Note that the the OEM Table ID field will not be extended with the
name of the table, but will use either the default name or the user
provided one.
This does not affect the -acpitable option (for user-defined ACPI
tables), which has precedence over -machine option.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Message-Id: <20210119003216.17637-3-posteuca@mutex.one>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
They have been deprecated since QEMU v5.0, time to remove them now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210203171832.483176-2-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To ease the PCI device addition in next patches, split the code as follows:
- generic code (read/write/setup) is being kept in pvpanic.c
- ISA dependent code moved to pvpanic-isa.c
Also, rename:
- ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE.
- TYPE_PVPANIC -> TYPE_PVPANIC_ISA.
- MemoryRegion io -> mr.
- pvpanic_ioport_* in pvpanic_*.
Update the build system with the new files and config structure.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AML needs Address Translation offset to describe how a bridge translates
addresses accross the bridge when using an address descriptor, and
especially on ARM, the translation offset of pio resource is usually
non zero.
Therefore, it's necessary to pass offset for pio, mmio32, mmio64 and bus
number into build_crs.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-4-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already have a generic PCI_SLOT() macro in "hw/pci/pci.h"
to extract the PCI slot identifier, use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20201012124506.3406909-5-philmd@redhat.com>
Enable removing tcg/$tcg_arch from the include path when TCG is disabled.
Move translate-all.h to include/exec, since stubs exist for the functions
defined therein.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026143028.3034018-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support the kernel-irqchip option for
WHPX with on or off value. 'split' value is not supported
for the option. The option only works for the latest version
of Windows (ones that are coming out on Insiders). The
change maintains backward compatibility on older version of
Windows where this option is not supported.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880B13258DA9251F8459F4DC0170@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IOAPIC has an 'Extended Destination ID' field in its RTE, which maps
to bits 11-4 of the MSI address. Since those address bits fall within a
given 4KiB page they were historically non-trivial to use on real hardware.
The Intel IOMMU uses the lowest bit to indicate a remappable format MSI,
and then the remaining 7 bits are part of the index.
Where the remappable format bit isn't set, we can actually use the other
seven to allow external (IOAPIC and MSI) interrupts to reach up to 32768
CPUs instead of just the 255 permitted on bare metal.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <78097f9218300e63e751e077a0a5ca029b56ba46.camel@infradead.org>
[Fix UBSAN warning. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Create second ioapic, route virtio-mmio IRQs to it,
allow more virtio-mmio devices (24 instead of 8).
Needs ACPI, enabled by default, can be turned off
using -machine ioapic2=off
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-8-kraxel@redhat.com
With the improved gsi_handler() we don't need
our private version any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-7-kraxel@redhat.com
Allows to move them in case we have enough
irq lines available.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-6-kraxel@redhat.com
This will allow to increase the number of transports in
case we have enough irq lines available for them all.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-5-kraxel@redhat.com
Add ioapic_init_secondary to initialize it, wire up
in gsi handling and acpi apic table creation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-4-kraxel@redhat.com
Rewrite function to use switch() for IRQ number mapping.
Check i8259_irq exists before raising it so the function
also works in case no i8259 (aka pic) is present.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20201203105423.10431-3-kraxel@redhat.com
Keep CPU hotunplug with SMI disabled on 5.2 and older and enable
it by default on newer machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
if firmware and QEMU negotiated CPU hotunplug support, generate
_EJ0 method so that it will mark CPU for removal by firmware and
pass control to it by triggering SMI.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At Hewlett Packard Inc. we have a need for increased fw size to enable testing of our custom fw.
Rebase v6 patch to d73c46e4
Signed-off-by: Erich McMillan <erich.mcmillan@hp.com>
Message-Id: <20201208155338.14-1-erich.mcmillan@hp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add 6.0 machine types for arm/i440fx/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201109173928.1001764-1-cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extract crs build form acpi_build.c, the function could also be used
to build the crs for pxbs for arm. The resources are composed by two parts:
1. The bar space of pci-bridge/pcie-root-ports
2. The resources needed by devices behind PXBs.
The base and limit of memory/io are obtained from the config via two APIs:
pci_bridge_get_base and pci_bridge_get_limit
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-5-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extract extra pci roots addition from pc machine, which could be used by
other machines.
In order to make uefi get the extra roots, it is necessary to write extra
roots into fw_cfg. And only if the uefi knows there are extra roots,
the config spaces of devices behind the root could be obtained.
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Message-Id: <20201119014841.7298-3-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Although they didn't reach the notifier because of the filtering in
memory_region_notify_iommu_one, the vt-d was still splitting huge
memory invalidations in chunks. Skipping it.
This improves performance in case of netperf with vhost-net:
* TCP_STREAM: From 1923.6Mbit/s to 2175.13Mbit/s (13%)
* TCP_RR: From 8464.73 trans/s to 8932.703333 trans/s (5.5%)
* UDP_RR: From 8562.08 trans/s to 9005.62/s (5.1%)
* UDP_STREAM: No change observed (insignificant 0.1% improvement)
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-5-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows us to differentiate between regular IOMMU map/unmap events
and DEVIOTLB unmap. Doing so, notifiers that only need device IOTLB
invalidations will not receive regular IOMMU unmappings.
Adapt intel and vhost to use it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we can tell between regular IOMMUTLBEntry (entry of IOMMU
hardware) and notifications.
In the notifications, we set explicitly if it is a MAPs or an UNMAP,
instead of trusting in entry permissions to differentiate them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Previous name didn't reflect the iommu operation.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GCC 9.3.0 thinks that 'method' can be left uninitialized. This code
is already in the "if (bsel || pcihp_bridge_en)" block statement,
but it isn't smart enough to figure it out.
Restrict the code to be used only in the "if (bsel || pcihp_bridge_en)"
block statement to fix (on Ubuntu):
../hw/i386/acpi-build.c: In function 'build_append_pci_bus_devices':
../hw/i386/acpi-build.c:496:9: error: 'method' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
496 | aml_append(parent_scope, method);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: df4008c9c5 ("piix4: don't reserve hw resources when hotplug is off globally")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201108204535.2319870-4-philmd@redhat.com>
Message-Id: <20201110192316.26397-8-alex.bennee@linaro.org>
Just a bunch of bugfixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl+cCq8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpKWkH/0qq+u2z/q0KYzmodcdW2eFNsvKF2e+Dz3Af
zZGMREH93DsKAQ2k3t84sz2RAaAP45cCqrq+v8kSzmpaC7GqKYA/VceeLwy8e6Eu
YKvu5QixrOVTpNg2QV/w44ywgtA4NbWy5Fr9S4qhzPyyD/gtE609weZ1vQnSFT7B
Gg4vr1lcqskwYTH7sh+bpsDTUeANr7QaknWKnaomroz+IUO8m9ig6RKtegaXhQCj
xswI4458S3nklqnoGMa56j46VYwft8YHO1lBiR1WefTHylknyng9Tdvf9G5mnzVg
wyrMTuT36lMXIa5KcSZeECIt2ZUT6KSSjWzEKZNXL5lS3gfUo7o=
=powp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,vhost,virtio: misc fixes
Just a bunch of bugfixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 30 Oct 2020 12:44:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
intel_iommu: Fix two misuse of "0x%u" prints
virtio: skip guest index check on device load
vhost-blk: set features before setting inflight feature
pci: Disallow improper BAR registration for type 1
pci: Change error_report to assert(3)
pci: advertise a page aligned ATS
pc: Implement -no-hpet as sugar for -machine hpet=on
vhost: Don't special case vq->used_phys in vhost_get_log_size()
pci: Assert irqnum is between 0 and bus->nirqs in pci_bus_change_irq_level
hw/pci: Extract pci_bus_change_irq_level() from pci_change_irq_level()
hw/virtio/vhost-vdpa: Fix Coverity CID 1432864
acpi/crs: Support ranges > 32b for hosts
acpi/crs: Prevent bad ranges for host bridges
vhost-vsock: set vhostfd to non-blocking mode
vhost-vdpa: negotiate VIRTIO_NET_F_STATUS with driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dave magically found this. Fix them with "0x%x".
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201019173922.100270-1-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Get rid of yet another global variable.
The default will be hpet=on only if CONFIG_HPET=y.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201021144716.1536388-1-ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to PCIe spec 5.0 Type 1 header space Base Address Registers
are defined by 7.5.1.2.1 Base Address Registers (same as Type 0). The
_CRS region should allow for the same range (up to 64b). Prior to this
change, any host bridge utilizing more than 32b for the BAR would have
the address truncated and likely lead to conflicts when the operating
systems reads the _CRS object.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Message-Id: <20201026193924.985014-2-ben.widawsky@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Prevent _CRS resources being quietly chopped off and instead throw an
assertion. _CRS is used by host bridges to declare regions of io and/or
memory that they consume. On some (all?) platforms the host bridge
doesn't have PCI header space and so they need some way to convey the
information.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Message-Id: <20201026193924.985014-1-ben.widawsky@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
pc_dimm_plug() doesn't use it. It only aborts on error.
Drop @errp and adapt the callers accordingly.
[dwg: Removed unused label to fix compile]
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309728447.2739814.12831204841251148202.stgit@bahia.lan>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Setting x86ms->pci_irq_mask to zero has the same effect,
so we don't need the has_pci argument any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201016113835.17465-6-kraxel@redhat.com
Makes sure the PCI interrupt overrides are added to the
APIC table in case PCIe is enabled.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201016113835.17465-5-kraxel@redhat.com
Add a variable to x86 machine state instead of
hard-coding the PCI interrupts.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201016113835.17465-4-kraxel@redhat.com
Restricting xen-set-global-dirty-log and xen-load-devices-state
commands migration.json pulls slightly less QAPI-generated code
into user-mode and tools.
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-6-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
xen-save-devices-state doesn't currently generate a vmdesc, so restore
always triggers "Expected vmdescription section, but got 0". This is
not a problem when restore comes from a file. However, when QEMU runs
in a linux stubdom and comes over a console, EOF is not received. This
causes a delay restoring - though it does restore.
Setting suppress-vmdesc skips looking for the vmdesc during restore and
avoids the wait.
The other approach would be generate a vmdesc in qemu_save_device_state.
Since COLO shared that function, and the vmdesc is just discarded on
restore, we choose to skip it.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20201013190506.3325-1-jandryuk@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
There's no references in only file which includes xenguest.h
to any xen definitions. And there's no references to -lxenguest
in qemu, either. Drop it.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200727140048.19779-1-mjt@msgid.tls.msk.ru>
[perard: rebased]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
As IRQ routing is always available on x86,
kvm_allows_irq0_override() will always return true, so we don't
need the function anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200922201922.2153598-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
KVM_CAP_IRQ_ROUTING is always available on x86, so replace checks
for kvm_has_gsi_routing() and KVM_CAP_IRQ_ROUTING with asserts.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200922201922.2153598-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The new interface starts unused, will start being used by the
next patches.
It provides methods for each accelerator to start a vcpu, kick a vcpu,
synchronize state, get cpu virtual clock and elapsed ticks.
In qemu_wait_io_event, make it clear that APC is used only for HAX
on Windows.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU's kvmclock device is only created when KVM PV feature bits for
kvmclock (KVM_FEATURE_CLOCKSOURCE/KVM_FEATURE_CLOCKSOURCE2) are
exposed to the guest. With 'kvm=off' cpu flag the device is not
created and we don't call KVM_GET_CLOCK/KVM_SET_CLOCK upon migration.
It was reported that without these call at least Hyper-V TSC page
clocksouce (which can be enabled independently) gets broken after
migration.
Switch to creating kvmclock QEMU device unconditionally, it seems
to always make sense to call KVM_GET_CLOCK/KVM_SET_CLOCK on migration.
Use KVM_CAP_ADJUST_CLOCK check instead of CPUID feature bits.
Reported-by: Antoine Damhet <antoine.damhet@blade-group.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200922151934.899555-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xen_hvm_init() is restricted to the X86 architecture.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xen_hvm_init() is only meanful to initialize a X86/PC machine,
rename it as xen_hvm_init_pc().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xen accelerator requires specific changes to a machine to be able
to use it. See for example the 'Xen PC' machine configure its PCI
bus calling pc_xen_hvm_init_pci(). There is no 'Xen Q35' machine
declared. This code was probably added while introducing the Q35
machine, based on the existing PC machine (see commit df2d8b3ed4
"Introduce q35 pc based chipset emulator"). Remove the unreachable
code to simplify this file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200722082517.18708-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it was deprecated since 4.1
commit 4bb4a2732e (numa: deprecate implict memory distribution between nodes)
Users of existing VMs, wishing to preserve the same RAM distribution,
should configure it explicitly using ``-numa node,memdev`` options.
Current RAM distribution can be retrieved using HMP command
`info numa` and if separate memory devices (pc|nv-dimm) are present
use `info memory-device` and subtract device memory from output of
`info numa`.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911084410.788171-2-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200715084326.678715-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place the 64bit window at the top of the physical address space, assign
25% of the avaiable address space. Force cpu.host-phys-bits=on for
microvm machine typs so this actually works reliable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-7-kraxel@redhat.com
Uses the existing gpex device which is also used as pcie host bridge on
arm/aarch64. For now only a 32bit mmio window and no ioport support.
It is disabled by default, use "-machine microvm,pcie=on" to enable.
ACPI support must be enabled too because the bus is declared in the
DSDT table.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-6-kraxel@redhat.com
Restricting LostTickPolicy to machine.json pulls slightly less
QAPI-generated code into user-mode.
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-2-philmd@redhat.com>
[Add rationale to commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When acpi hotplug is turned off for both root pci bus as well as for pci
bridges, we should not generate the related ACPI code for DSDT table or
initialize related hw ports or reserve hw resources. This change makes
sure all those operations are turned off in the case ACPI pci hotplug is
off globally.
In this change, we also make sure ACPI code for the PCNT method are only
added when bsel is enabled for the corresponding pci bus or bridge hotplug
is turned on.
As q35 machines do not use bsel for it's pci buses at this point in time, this
change affects DSDT acpi table for q35 machines as well. Therefore, we will
also need to commit the updated golden master DSDT table acpi binary blobs as
well. Following is the list of blobs which needs updating:
tests/data/acpi/q35/DSDT
tests/data/acpi/q35/DSDT.acpihmat
tests/data/acpi/q35/DSDT.bridge
tests/data/acpi/q35/DSDT.cphp
tests/data/acpi/q35/DSDT.dimmpxm
tests/data/acpi/q35/DSDT.ipmibt
tests/data/acpi/q35/DSDT.memhp
tests/data/acpi/q35/DSDT.mmio64
tests/data/acpi/q35/DSDT.numamem
tests/data/acpi/q35/DSDT.tis
These tables are updated in the following commit. Without the updated table
blobs, the unit tests would fail with this patch.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-11-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cold plugged bridges are not hot unpluggable, even when their hotplug
property (acpi-pci-hotplug-with-bridge-support) is turned off. Please see
the function acpi_pcihp_pc_no_hotplug(). However, with
the current implementaton, Windows would try to hot-unplug a pci bridge when
it's hotplug switch is off. This is regardless of whether there are devices
attached to the bridge. This is because we add ACPI code like _EJ0 etc for the
pci slot where the bridge is cold plugged.
In this fix, we identify a cold plugged bridge and for cold plugged bridges,
we do not add the appropriate ACPI methods that are used by the OS
to identify a hot-pluggable/unpluggable pci device. After this change, Windows
does not detect the cold plugged pci bridge as ejectable.
As a result of the patch, the following are the changes to the DSDT ACPI
table:
@@ -858,38 +858,33 @@
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
Device (S18)
{
- Name (_SUN, 0x03) // _SUN: Slot User Number
Name (_ADR, 0x00030000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
}
Device (S20)
{
Name (_SUN, 0x04) // _SUN: Slot User Number
Name (_ADR, 0x00040000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Device (S28)
{
Name (_SUN, 0x05) // _SUN: Slot User Number
Name (_ADR, 0x00050000) // _ADR: Address
@@ -1148,37 +1143,32 @@
PCEJ (BSEL, _SUN)
}
}
Device (SF8)
{
Name (_SUN, 0x1F) // _SUN: Slot User Number
Name (_ADR, 0x001F0000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Method (DVNT, 2, NotSerialized)
{
- If ((Arg0 & 0x08))
- {
- Notify (S18, Arg1)
- }
-
If ((Arg0 & 0x10))
{
Notify (S20, Arg1)
}
If ((Arg0 & 0x20))
{
Notify (S28, Arg1)
}
If ((Arg0 & 0x40))
{
Notify (S30, Arg1)
}
If ((Arg0 & 0x80))
While at it, I have also updated a stale comment.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Suggested-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When CPU hotplug with SMI has been negotiated, describe the SMI
register block in the DSDT. Pass the ACPI name of the SMI control
register to build_cpus_aml(), so that CPU_SCAN_METHOD can access the
register in the next patch.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Translate the "CPU hotplug with SMI" feature bit, from the property
added in the last patch, to a dedicated boolean in AcpiPmInfo.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There were reports of guest crash on CPU hotplug, when using q35 machine
type and OVMF with SMM, due to hotplugged CPU trying to process SMI at
default SMI handler location without it being relocated by firmware first.
Fix it by refusing hotplug if firmware hasn't negotiated CPU hotplug with
SMI support while SMI broadcast is in use.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-3-imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will allow firmware to notify QEMU that firmware requires SMI
being triggered on CPU hot[un]plug, so that it would be able to account
for hotplugged CPU and relocate it to new SMM base and/or safely remove
CPU on unplug.
Using negotiated features, follow up patches will insert SMI upcall
into AML code, to make sure that firmware processes hotplug before
guest OS would attempt to use new CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These were deprecated since 4.0, remove both HMP and QMP variants.
Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unfortunately, a typo sneeked in: we want to set
auto_enable_numa_with_memdev to false, not auto_enable_numa_with_memhp.
Cc: qemu-stable@nongnu.org # v5.1
Fixes: 195784a0cf (numa: Auto-enable NUMA when any memory devices are possible)
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200820094828.30348-1-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
it's was deprecated since 3.1
Support for invalid topologies is removed, the user must ensure
that topologies described with -smp include all possible cpus,
i.e. (sockets * cores * threads) == maxcpus or QEMU will
exit with error.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911133202.938754-1-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The cpu hotplug code handles the initialization of coldplugged cpus
too, so it is needed even in case cpu hotplug is not supported.
Wire cpu hotplug up for microvm.
Without this we get a broken MADT table.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200915120909.20838-17-kraxel@redhat.com
The cpu hotplug code handles the initialization of coldplugged cpus
too, so it is needed even in case cpu hotplug is not supported.
Move the code from pc to x86, so microvm can use it.
Move both plug and unplug to keep everything in one place, even
though microvm needs plug only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-16-kraxel@redhat.com
Both pc and microvm machine types have a acpi_dev field.
Move it to the common base type.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-15-kraxel@redhat.com
... in case we are using ACPI.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200915120909.20838-13-kraxel@redhat.com
With acpi=off continue to use qboot.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200915120909.20838-12-kraxel@redhat.com
With ACPI enabled and IO-APIC being properly declared in the ACPI tables
we can use interrupt lines 16-23 for virtio and avoid shared interrupts.
With acpi disabled we continue to use lines 5-12.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-11-kraxel@redhat.com
$subject says all. Can be controlled using -M microvm,acpi=on/off.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-9-kraxel@redhat.com
qboot isn't a bios and shouldnt be named that way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200915120909.20838-2-kraxel@redhat.com
- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl9Z9wkACgkQ+9DbCVqe
KkRbkQf9HLRDEUSy/1LqbU7ncHzgCmnlzC0MKCqn/L3e+M916naO3xhu0tbJN9Ks
nxu9irY1mGrj/gK+gJ9lr50GOvcc8XCFTpE82MisMRWWFeVRt3vYLAql7WcY0ioM
K6jMMfoVswmVetP034llQhsAt9zvFimL89kp4O4i2Mjw5shsBIPfharXnnhL4EgS
ykKmUdLWxAJPSOJJA71IAFP9UzMYfXg7/NHFK1SMVOWZjMT18aoa6YDzBpbr4KzX
4vOvgGK3tBlVuOooSew7By6iR5oBPa5GP7O9Z78osCsyvzJMPcoNxQZyvgnS0Tda
q6+/QeF9/ooDPkg5Jq6Z8EAsY0q+XA==
=PIOR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging
Various misc and testing fixes:
- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib
# gpg: Signature made Thu 10 Sep 2020 10:51:05 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-fixes-100920-1:
plugins: move the more involved plugins to contrib
tests/acceptance: Add Test.fetch_asset(cancel_on_missing=True)
tests: bump avocado version
hw/i386: make explicit clearing of pch_rev_id
configure: don't enable ppc64abi32-linux-user by default
docs/system/deprecated: mark ppc64abi32-linux-user for deprecation
target/mips: simplify gen_compute_imm_branch logic
tests/meson.build: fp tests don't need CONFIG_TCG
usb-host: restrict workaround to new libusb versions
CODING_STYLE.rst: flesh out our naming conventions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some compilers (notably the Xenial gcc in Travis) fail to spot that
this will always be set if pch_dev_id != 0xffff. Given this is setup
code and using _Pragma to override is equally as ugly lets just remove
the doubt from the compilers mind.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200909112742.25730-8-alex.bennee@linaro.org>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit c24a41bb53.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889937478.21294.4192291354416942986.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 6121c7fbfd.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889935648.21294.8095493980805969544.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 2e26f4ab3b.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889934379.21294.15323080164340490855.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 7b225762c8.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Also fix all the references of pkg_offset.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889933119.21294.8112825730577505757.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some QOM macros were using a X86_IOMMU_DEVICE prefix, and others
were using a X86_IOMMU prefix. Rename all of them to use the
same X86_IOMMU_DEVICE prefix.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-47-ehabkost@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Fix a typo in an error message for KVM_SET_IRQCHIP ioctl:
"KVM_GET_IRQCHIP" should be "KVM_SET_IRQCHIP".
Fixes: a39c1d47ac ("kvm: x86: Add user space part for in-kernel IOAPIC")
Signed-off-by: Kenta Ishiguro <kentaishiguro@slowstart.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200717123514.15406-1-kentaishiguro@slowstart.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1594631126-36631-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will make future conversion to use OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200826184334.4120620-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
macOS uses ACPI UIDs to build the DevicePath for NVRAM boot options,
while OVMF firmware gets them via an internal channel through QEMU.
Due to a bug in QEMU ACPI currently UEFI firmware and ACPI have
different values, and this makes the underlying operating system
unable to report its boot option.
The particular node in question is the primary PciRoot (PCI0 in ACPI),
which for some reason gets assigned 1 in ACPI UID and 0 in the
DevicePath. This is due to the _UID assigned to it by build_dsdt in
hw/i386/acpi-build.c Which does not correspond to the primary PCI
identifier given by pcibus_num in hw/pci/pci.c
Reference with the device paths, OVMF startup logs, and ACPI table
dumps (SysReport):
https://github.com/acidanthera/bugtracker/issues/1050
In UEFI v2.8, section "10.4.2 Rules with ACPI _HID and _UID" ends with
the paragraph,
Root PCI bridges will use the plug and play ID of PNP0A03, This will
be stored in the ACPI Device Path _HID field, or in the Expanded
ACPI Device Path _CID field to match the ACPI name space. The _UID
in the ACPI Device Path structure must match the _UID in the ACPI
name space.
(See especially the last sentence.)
Considering *extra* root bridges / root buses (with bus number > 0),
QEMU's ACPI generator actually does the right thing; since QEMU commit
c96d9286a6 ("i386/acpi-build: more traditional _UID and _HID for PXB
root buses", 2015-06-11).
However, the _UID values for root bridge zero (on both i440fx and q35)
have always been "wrong" (from UEFI perspective), going back in QEMU to
commit 74523b8501 ("i386: add ACPI table files from seabios",
2013-10-14).
Even in SeaBIOS, these _UID values have always been 1; see commit
a4d357638c57 ("Port rombios32 code from bochs-bios.", 2008-03-08) for
i440fx, and commit ecbe3fd61511 ("seabios: q35: add dsdt", 2012-12-01)
for q35.
Cc: qemu-stable@nongnu.org
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Each architecture's sourceset is placed in an hw_arch dictionary, and picked up
from there when building the per-emulator static_library.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add 5.2 machine types for arm/i440fx/q35/s390x/spapr.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200819144016.281156-1-cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The pci host config register is used to save PCI address for
read/write config data. If guest writes a value to config register,
and then QEMU pauses the vcpu to migrate, after the migration, the guest
will continue to write pci config data, and the write data will be ignored
because of new qemu process losing the config register state.
To trigger the bug:
1. guest is booting in seabios.
2. guest enables the SMRAM in seabios:piix4_apmc_smm_setup, and then
expects to disable the SMRAM by pci_config_writeb.
3. after guest writes the pci host config register, QEMU pauses vcpu
to finish migration.
4. guest write of config data(0x0A) fails to disable the SMRAM because
the config register state is lost.
5. guest continues to boot and crashes in ipxe option ROM due to SMRAM
in enabled state.
Example Reproducer:
step 1. Make modifications to seabios and qemu for increase reproduction
efficiency, write 0xf0 to 0x402 port notify qemu to stop vcpu after
0x0cf8 port wrote i440 configure register. qemu stop vcpu when catch
0x402 port wrote 0xf0.
seabios:/src/hw/pci.c
@@ -52,6 +52,11 @@ void pci_config_writeb(u16 bdf, u32 addr, u8 val)
writeb(mmconfig_addr(bdf, addr), val);
} else {
outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD);
+ if (bdf == 0 && addr == 0x72 && val == 0xa) {
+ dprintf(1, "stop vcpu\n");
+ outb(0xf0, 0x402); // notify qemu to stop vcpu
+ dprintf(1, "resume vcpu\n");
+ }
outb(val, PORT_PCI_DATA + (addr & 3));
}
}
qemu:hw/char/debugcon.c
@@ -60,6 +61,9 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val,
printf(" [debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02" PRIx64 "]\n", addr, val);
#endif
+ if (ch == 0xf0) {
+ vm_stop(RUN_STATE_PAUSED);
+ }
/* XXX this blocks entire thread. Rewrite to use
* qemu_chr_fe_write and background I/O callbacks */
qemu_chr_fe_write_all(&s->chr, &ch, 1);
step 2. start vm1 by the following command line, and then vm stopped.
$ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\
-netdev tap,ifname=tap-test,id=hostnet0,vhost=on,downscript=no,script=no\
-device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\
-device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\
-chardev file,id=seabios,path=/var/log/test.seabios,append=on\
-device isa-debugcon,iobase=0x402,chardev=seabios\
-monitor stdio
step 3. start vm2 to accept vm1 state.
$ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\
-netdev tap,ifname=tap-test1,id=hostnet0,vhost=on,downscript=no,script=no\
-device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\
-device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\
-chardev file,id=seabios,path=/var/log/test.seabios,append=on\
-device isa-debugcon,iobase=0x402,chardev=seabios\
-monitor stdio \
-incoming tcp:127.0.0.1:8000
step 4. execute the following qmp command in vm1 to migrate.
(qemu) migrate tcp:127.0.0.1:8000
step 5. execute the following qmp command in vm2 to resume vcpu.
(qemu) cont
Before this patch, we get KVM "emulation failure" error on vm2.
This patch fixes it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Hogan Wang <hogan.wang@huawei.com>
Message-Id: <20200727084621.3279-1-hogan.wang@huawei.com>
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tracked down with scripts/coccinelle/err-bad-newline.cocci.
Cc: Peter Xu <peterx@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200722084048.1726105-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
In chapter 10.4.23 of VT-d spec 3.0, Descriptor Width bit was introduced
in VTD_IQA_REG. Software could set this bit to tell VT-d the QI descriptor
from software would be 256 bits. Accordingly, the VTD_IQH_QH_SHIFT should
be 5 when descriptor size is 256 bits.
This patch adds the DW bit check when deciding the shift used to update
VTD_IQH_REG.
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Message-Id: <1593850035-35483-1-git-send-email-yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
tries to fix a leak detected when building with --enable-sanitizers:
./i386-softmmu/qemu-system-i386
Upon exit:
==13576==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 1216 byte(s) in 1 object(s) allocated from:
#0 0x7f9d2ed5c628 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5)
#1 0x7f9d2e963500 in g_malloc (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.)
#2 0x55fa646d25cc in object_new_with_type /tmp/qemu/qom/object.c:686
#3 0x55fa63dbaa88 in qdev_new /tmp/qemu/hw/core/qdev.c:140
#4 0x55fa638a533f in pc_pflash_create /tmp/qemu/hw/i386/pc_sysfw.c:88
#5 0x55fa638a54c4 in pc_system_flash_create /tmp/qemu/hw/i386/pc_sysfw.c:106
#6 0x55fa646caa1d in object_init_with_type /tmp/qemu/qom/object.c:369
#7 0x55fa646d20b5 in object_initialize_with_type /tmp/qemu/qom/object.c:511
#8 0x55fa646d2606 in object_new_with_type /tmp/qemu/qom/object.c:687
#9 0x55fa639431e9 in qemu_init /tmp/qemu/softmmu/vl.c:3878
#10 0x55fa6335c1b8 in main /tmp/qemu/softmmu/main.c:48
#11 0x7f9d2cf06e0a in __libc_start_main ../csu/libc-start.c:308
#12 0x55fa6335f8e9 in _start (/tmp/qemu/build/i386-softmmu/qemu-system-i386)
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200701145231.19531-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous two commits did that for sufficiently simple
cases with Coccinelle. Do it for several more manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-37-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
Replace
error_setg(&err, ...);
error_propagate(errp, err);
by
error_setg(errp, ...);
Related pattern:
if (...) {
error_setg(&err, ...);
goto out;
}
...
out:
error_propagate(errp, err);
return;
When all paths to label out are that way, replace by
if (...) {
error_setg(errp, ...);
return;
}
and delete the label along with the error_propagate().
When we have at most one other path that actually needs to propagate,
and maybe one at the end that where propagation is unnecessary, e.g.
foo(..., &err);
if (err) {
goto out;
}
...
bar(..., &err);
out:
error_propagate(errp, err);
return;
move the error_propagate() to where it's needed, like
if (...) {
foo(..., &err);
error_propagate(errp, err);
return;
}
...
bar(..., errp);
return;
and transform the error_setg() as above.
In some places, the transformation results in obviously unnecessary
error_propagate(). The next few commits will eliminate them.
Bonus: the elimination of gotos will make later patches in this series
easier to review.
Candidates for conversion tracked down with this Coccinelle script:
@@
identifier err, errp;
expression list args;
@@
- error_setg(&err, args);
+ error_setg(errp, args);
... when != err
error_propagate(errp, err);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-34-armbru@redhat.com>
The previous commit enables conversion of
foo(..., &err);
if (err) {
...
}
to
if (!foo(..., errp)) {
...
}
for QOM functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun = {
object_apply_global_props, object_initialize_child_with_props,
object_initialize_child_with_propsv, object_property_get,
object_property_get_bool, object_property_parse, object_property_set,
object_property_set_bool, object_property_set_int,
object_property_set_link, object_property_set_qobject,
object_property_set_str, object_property_set_uint, object_set_props,
object_set_propv, user_creatable_add_dict,
user_creatable_complete, user_creatable_del
};
expression list args, args2;
typedef Error;
Error *err;
@@
- fun(args, &err, args2);
- if (err)
+ if (!fun(args, &err, args2))
{
...
}
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-29-armbru@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
The generic pc_machine_initfn() calls pc_system_flash_create() which creates
'system.flash0' and 'system.flash1' devices. These devices are then realized
by pc_system_flash_map() which is called from pc_system_firmware_init() which
itself is called via pc_memory_init(). The latter however is not called when
xen_enable() is true and hence the following assertion fails:
qemu-system-i386: hw/core/qdev.c:439: qdev_assert_realized_properly:
Assertion `dev->realized' failed
These flash devices are unneeded when using Xen so this patch avoids the
assertion by simply removing them using pc_system_flash_cleanup_unused().
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Fixes: ebc29e1bea ("pc: Support firmware configuration with -blockdev")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200624121841.17971-3-paul@xen.org>
Fixes: dfe8c79c44 ("qdev: Assert onboard devices all get realized properly")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Add deprecation message to the audio init function.
Factor out audio initialization and call that from
both audio init and realize, so setting the audiodev
property is enough to properly initialize pcspk.
Add a property alias to the machine type to set the
audio device, so pcspk can be initialized using:
"-machine pcspk-audiodev=<name>"
Using "-global isa-pcspk.audiodev=<name>" works too but
is not recommended.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-18-kraxel@redhat.com
Create the pcspk device early, so it exists at
machine type initialization time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-17-kraxel@redhat.com
Instead of creating and returning the pc speaker accept it as argument.
That allows to rework the initialization workflow in followup patches.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-16-kraxel@redhat.com
Now that we pass pcms anyway, we don't need the no_vmport arg any more.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-14-kraxel@redhat.com
Now that we pass pcms anyway, we don't need the has_pit arg any more.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-13-kraxel@redhat.com
Need access to pcms for pcspk initialization.
Just preparation, no functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-12-kraxel@redhat.com
Let's auto-enable it also when maxmem is specified but no slots are
defined. This will result in us properly creating ACPI srat tables,
indicating the maximum possible PFN to the guest OS. Based on this, e.g.,
Linux will enable the swiotlb properly.
This avoids having to manually force the switolb on (swiotlb=force) in
Linux in case we're booting only using DMA memory (e.g., 2GB on x86-64),
and virtio-mem adds memory later on that really needs the swiotlb to be
used for DMA.
Let's take care of backwards compatibility if somebody has a setup that
specifies "maxram" without "slots".
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Sergio Lopez <slp@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-arm@nongnu.org <qemu-arm@nongnu.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-22-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's wire it up similar to virtio-pmem. Also disallow unplug, so it's
harder for users to shoot themselves into the foot.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-16-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
E.g., with "pc-q35-4.2", trying to coldplug a virtio-pmem-pci devices
results in
"virtio-pmem-pci not supported on this bus"
Reasons is, that the bus does not support hotplug and, therefore, does
not have a hotplug handler. Let's allow coldplugging virtio-pmem devices
on such buses. The hotplug order is only relevant for virtio-pmem-pci
when the guest is already alive and the device is visible before
memory_device_plug() wired up the memory device bits.
Hotplug attempts will still fail with:
"Error: Bus 'pcie.0' does not support hotplugging"
Hotunplug attempts will still fail with:
"Error: Bus 'pcie.0' does not support hotplugging"
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
amdvi_realize() is wrong that way: it passes @errp to qdev_realize(),
object_property_get_int(), and msi_init() without checking it. I
can't tell offhand whether qdev_realize() can fail here. Fix by
checking it for failure. object_property_get_int() can't. Fix by
passing &error_abort instead.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-22-armbru@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
x86_cpu_new() is wrong that way: it passes &local_err to
object_property_set_uint() without checking it, and then to
qdev_realize(). If both fail, we'll trip error_setv()'s assertion.
To assess the bug's impact, we'd need to figure out how to make both
calls fail. Too much work for ignorant me, sorry.
Fix by checking for failure right away.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-21-armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
It seems like Windows does not really require 2 IRQs to have a
functioning VMBus.
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200617160904.681845-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Deprecation period is run out and it's a time to flip the switch
introduced by cd5ff8333a. Disable legacy option for new machine
types (since 5.1) and amend documentation.
'-numa node,memdev' shall be used instead of disabled option
with new machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200609135635.761587-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86 machines can have a single ISA bus only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200619091905.21676-9-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add helper function to add fw_cfg device,
also move code to hw/i386/fw_cfg.c.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-8-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
DSDT change: isa device order changes in case MI1 (ipmi) is present.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-7-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20200619091905.21676-6-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
DSDT change: isa device order changes in case MI1 (ipmi) is present.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-4-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Helper function fdctrl_init_isa() is less than helpful: one of three
places creating "isa-fdc" devices use it. Open-code it there, and
drop the function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-6-armbru@redhat.com>
Move from X86MachineClass to PCMachineClass so it disappears
from microvm machine type property list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-id: 20200529073957.8018-4-kraxel@redhat.com
Not useful for microvm and allows users to shoot themself
into the foot (make ram + mmio overlap).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200529073957.8018-3-kraxel@redhat.com
Looks like the logic was copied over from q35.
q35 does this for backward compatibility, there is no reason to do this
on microvm though. Also microvm doesn't need much mmio space, 1G is
more than enough. Using an mmio window smaller than 1G is bad for
gigabyte alignment and hugepages though. So split @ 3G unconditionally.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200529073957.8018-2-kraxel@redhat.com
All remaining conversions to qdev_realize() are for bus-less devices.
Coccinelle script:
// only correct for bus-less @dev!
@@
expression errp;
expression dev;
@@
- qdev_init_nofail(dev);
+ qdev_realize(dev, NULL, &error_fatal);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(dev, true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
Same transformation as in the previous commit. Manual, because
convincing Coccinelle to transform these cases is not worthwhile.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-21-armbru@redhat.com>
In addition to the qdev_create() patterns converted so far, we have a
qdev_set_parent_bus() pattern. Mostly when we embed a device in a
parent device rather than allocating it on the heap.
This pattern also puts devices in the dangerous "no QOM parent, but
plugged into bus" state I explained in recent commit "qdev: New
qdev_new(), qdev_realize(), etc."
Apply same solution: convert to qdev_realize(). Coccinelle script:
@@
expression dev, bus, errp;
symbol true;
@@
- qdev_set_parent_bus(DEVICE(dev), bus);
...
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), bus, errp);
@ depends on !(file in "qdev-monitor.c") && !(file in "hw/core/qdev.c")@
expression dev, bus, errp;
symbol true;
@@
- qdev_set_parent_bus(dev, bus);
...
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(dev, bus, errp);
@@
expression dev, bus;
symbol true;
@@
- qdev_set_parent_bus(DEVICE(dev), bus);
...
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize(DEVICE(dev), bus, &error_fatal);
Unconverted uses of qdev_set_parent_bus() remain. They'll be
converted later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-12-armbru@redhat.com>
[Also convert new hw/virtio/vhost-user-vsock-pci.c]
Same transformation as in the previous commit. Manual, because
convincing Coccinelle to transform these cases is somewhere between
not worthwhile and infeasible (at least for me).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this series.
Coccinelle script:
@ depends on !(file in "hw/arm/highbank.c")@
expression bus, type_name, dev, expr;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr;
identifier DOWN;
@@
- dev = DOWN(qdev_create(bus, type_name));
+ dev = DOWN(qdev_new(type_name));
... when != dev = expr
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);
@@
expression bus, type_name, expr;
identifier dev;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr, errp;
symbol true;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
@@
expression bus, type_name, expr, errp;
identifier dev;
symbol true;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name. Covered by the
next commit's manual conversions.
Missing #include "qapi/error.h" added manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
Xen PCI passthrough support may not be available and thus the global
variable "has_igd_gfx_passthru" might be compiled out. Common code
should not access it in that case.
Unfortunately, we can't use CONFIG_XEN_PCI_PASSTHROUGH directly in
xen-common.c so this patch instead move access to the
has_igd_gfx_passthru variable via function and those functions are
also implemented as stubs. The stubs will be used when QEMU is built
without passthrough support.
Now, when one will want to enable igd-passthru via the -machine
property, they will get an error message if QEMU is built without
passthrough support.
Fixes: 46472d8232 ('xen: convert "-machine igd-passthru" to an accelerator property')
Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200603160442.3151170-1-anthony.perard@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Max slots negotiation for vhost-user.
Free page reporting for balloon.
Partial TPM2 ACPI support for ARM.
Support for NVDIMMs having their own proximity domains.
New vhost-user-vsock device.
Fixes, cleanups in ACPI, PCI, virtio.
New tests for TPM ACPI.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl7jjpwPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp9AEH/RH+o9fT+Jvwv1yiCF44kjrfQ9MHzT+hDo96
vd6Ynj6O49M+ObL3f9fI5ICYHAmZQFzouJ671/FcQQF/CrMot1HBnHAWAzS2YoFu
3iNOA6PmWn0fWoVAuIfmhtE0PKNJdsuyyJMbcKY5d5bSPugO3b/bIPvo8oVAIXiM
3xf0KbicB6m0z24ssZoI7KP7PSJcacDViFXUJkgCIMce68od4CDEQ8TGi6jBmAzQ
VdriGnOCJ9Wo60GC4KL4v8HKZWnq4Nz4qfwQtHdY/MUL30eFDjYcgF0AMYLHrymy
DInh/GRQMxtD0VvOxtq1BUV0tHk/qH4XyEohSyBOrIrH+ifnjds=
=hh+M
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,acpi,pci: features, fixes, cleanups, tests
Max slots negotiation for vhost-user.
Free page reporting for balloon.
Partial TPM2 ACPI support for ARM.
Support for NVDIMMs having their own proximity domains.
New vhost-user-vsock device.
Fixes, cleanups in ACPI, PCI, virtio.
New tests for TPM ACPI.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 12 Jun 2020 15:18:04 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (58 commits)
virtio-pci: fix queue_enable write
pci: Display PCI IRQ pin in "info pci"
Fix parameter type in vhost migration log path
acpi: ged: rename event memory region
acpi: fadt: add hw-reduced sleep register support
acpi: madt: skip pci override on pci-less systems.
acpi: create acpi-common.c and move madt code
acpi: make build_madt() more generic.
virtio: add vhost-user-vsock-pci device
virtio: add vhost-user-vsock base device
vhost-vsock: add vhost-vsock-common abstraction
hw/pci: Fix crash when running QEMU with "-nic model=rocker"
libvhost-user: advertise vring features
Lift max ram slots limit in libvhost-user
Support individual region unmap in libvhost-user
Support adding individual regions in libvhost-user
Support ram slot configuration in libvhost-user
Refactor out libvhost-user fault generation logic
Lift max memory slots limit imposed by vhost-user
Transmit vhost-user memory regions individually
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Needed for microvm.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200520132003.9492-8-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We'll need madt support for microvm.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200520132003.9492-7-kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove PCMachineState dependency from build_madt().
Pass AcpiDeviceIf as separate argument instead of
depending on PCMachineState->acpi_dev.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200520132003.9492-6-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many reserved bits of amd_iommu commands are defined incorrectly in QEMU.
Because of it, QEMU incorrectly injects lots of illegal commands into guest
VM's IOMMU event log.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Message-Id: <20200418042845.596457-1-wei.huang2@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Trying libFuzzer on the vmport device, we get:
AddressSanitizer:DEADLYSIGNAL
=================================================================
==29476==ERROR: AddressSanitizer: SEGV on unknown address 0x000000008840 (pc 0x56448bec4d79 bp 0x7ffeec9741b0 sp 0x7ffeec9740e0 T0)
==29476==The signal is caused by a READ memory access.
#0 0x56448bec4d78 in vmport_ioport_read (qemu-fuzz-i386+0x1260d78)
#1 0x56448bb5f175 in memory_region_read_accessor (qemu-fuzz-i386+0xefb175)
#2 0x56448bb30c13 in access_with_adjusted_size (qemu-fuzz-i386+0xeccc13)
#3 0x56448bb2ea27 in memory_region_dispatch_read1 (qemu-fuzz-i386+0xecaa27)
#4 0x56448bb2e443 in memory_region_dispatch_read (qemu-fuzz-i386+0xeca443)
#5 0x56448b961ab1 in flatview_read_continue (qemu-fuzz-i386+0xcfdab1)
#6 0x56448b96336d in flatview_read (qemu-fuzz-i386+0xcff36d)
#7 0x56448b962ec4 in address_space_read_full (qemu-fuzz-i386+0xcfeec4)
This is easily reproducible using:
$ echo inb 0x5658 | qemu-system-i386 -M isapc,accel=qtest -qtest stdio
[I 1589796572.009763] OPENED
[R +0.008069] inb 0x5658
Segmentation fault (core dumped)
$ coredumpctl gdb -q
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00005605b54d0f21 in vmport_ioport_read (opaque=0x5605b7531ce0, addr=0, size=4) at hw/i386/vmport.c:77
77 eax = env->regs[R_EAX];
(gdb) p cpu
$1 = (X86CPU *) 0x0
(gdb) bt
#0 0x00005605b54d0f21 in vmport_ioport_read (opaque=0x5605b7531ce0, addr=0, size=4) at hw/i386/vmport.c:77
#1 0x00005605b53db114 in memory_region_read_accessor (mr=0x5605b7531d80, addr=0, value=0x7ffc9d261a30, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:434
#2 0x00005605b53db5d4 in access_with_adjusted_size (addr=0, value=0x7ffc9d261a30, size=1, access_size_min=4, access_size_max=4, access_fn=
0x5605b53db0d2 <memory_region_read_accessor>, mr=0x5605b7531d80, attrs=...) at memory.c:544
#3 0x00005605b53de156 in memory_region_dispatch_read1 (mr=0x5605b7531d80, addr=0, pval=0x7ffc9d261a30, size=1, attrs=...) at memory.c:1396
#4 0x00005605b53de228 in memory_region_dispatch_read (mr=0x5605b7531d80, addr=0, pval=0x7ffc9d261a30, op=MO_8, attrs=...) at memory.c:1424
#5 0x00005605b537c80a in flatview_read_continue (fv=0x5605b7650290, addr=22104, attrs=..., ptr=0x7ffc9d261b4b, len=1, addr1=0, l=1, mr=0x5605b7531d80) at exec.c:3200
#6 0x00005605b537c95d in flatview_read (fv=0x5605b7650290, addr=22104, attrs=..., buf=0x7ffc9d261b4b, len=1) at exec.c:3239
#7 0x00005605b537c9e6 in address_space_read_full (as=0x5605b5f74ac0 <address_space_io>, addr=22104, attrs=..., buf=0x7ffc9d261b4b, len=1) at exec.c:3252
#8 0x00005605b53d5a5d in address_space_read (len=1, buf=0x7ffc9d261b4b, attrs=..., addr=22104, as=0x5605b5f74ac0 <address_space_io>) at include/exec/memory.h:2401
#9 0x00005605b53d5a5d in cpu_inb (addr=22104) at ioport.c:88
X86CPU is NULL because QTest accelerator does not use CPU.
Fix by returning default values when QTest accelerator is used.
Reported-by: Clang AddressSanitizer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code is not related to hardware emulation.
Move it under accel/ with the other hypervisors.
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200508100222.7112-1-philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmport_register() is also called from other modules such as vmmouse.
Therefore, these modules rely that vmport is realized before those call
sites. If this is violated, vmport_register() will NULL-deref.
To make such issues easier to debug, assert in vmport_register() that
vmport is already realized.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-17-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This command returns to guest information on LAPIC bus frequency and TSC
frequency.
One can see how this interface is used by Linux vmware_platform_setup()
introduced in Linux commit 88b094fb8d4f ("x86: Hypervisor detection and
get tsc_freq from hypervisor").
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-16-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signal to guest that hypervisor supports x2apic without VT-d/IOMMU
Interrupt-Remapping support. This allows guest to use x2apic in
case all APIC IDs fits in 8-bit (i.e. Max APIC ID < 255).
See Linux kernel commit 4cca6ea04d31 ("x86/apic: Allow x2apic
without IR on VMware platform") and Linux try_to_enable_x2apic()
function.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-14-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Command currently returns that it is unimplemented by setting
the reserved-bit in it's return value.
Following patches will return various useful vCPU information
to guest.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200312165431.82118-13-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
