Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_constant_{i32,i64} as appropriate throughout.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The operation we're performing with the movcond
is either min/max depending on cond -- simplify.
Use tcg_constant_i64 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_constant_{i32,i64} as appropriate throughout.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_constant_{i32,i64} as appropriate throughout.
This fixes a bug in trans_VSCCLRM() where we were leaking a TCGv.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The length of the previous insn may be computed from
the difference of start and end addresses.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_gen_umin_i32 instead of tcg_gen_movcond_i32.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of computing
tmp1 = shift & 0xff;
dest = (tmp1 > 0x1f ? 0 : value) << (tmp1 & 0x1f)
use
tmpd = value << (shift & 0x1f);
dest = shift & 0xe0 ? 0 : tmpd;
which has a flatter dependency tree.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For aa32, the function has a parameter to use the new el.
For aa64, that never happens.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Common code for reset_btype and set_btype.
Use tcg_constant_i32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is incorrect in that it does not properly consider
CPTR_EL2.FPEN. We've already got another mechanism for raising
an FPU access trap: ARM_CP_FPU, so use that instead.
Remove CP_ACCESS_TRAP_FP_EL{2,3}, which becomes unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Adjust the assignments to use true/false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Move the member down in the struct to keep the
bool type members together and remove a hole.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we assume all fields are 32-bit.
Prepare for fields of a single byte, using sizeof_field().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: use sizeof_field() instead of raw sizeof()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Adjust the assignments to use true/false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Move the member down in the struct to keep the
bool type members together and remove a hole.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update SCTLR_ELx fields per ARM DDI0487 H.a.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update SCR_EL3 fields per ARM DDI0487 H.a.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update isar fields per ARM DDI0487 H.a.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In a GICv3, it is impossible for the GIC to deliver a VIRQ or VFIQ to
the CPU unless the CPU has EL2, because VIRQ and VFIQ are only
configurable via EL2-only system registers. Moreover, in our
implementation we were only calculating and updating the state of the
VIRQ and VFIQ lines in gicv3_cpuif_virt_irq_fiq_update() when those
EL2 system registers changed. We were therefore able to assert in
arm_cpu_set_irq() that we didn't see a VIRQ or VFIQ line update if
EL2 wasn't present.
This assumption no longer holds with GICv4:
* even if the CPU does not have EL2 the guest is able to cause the
GIC to deliver a virtual LPI by programming the ITS (which is a
silly thing for it to do, but possible)
* because we now need to recalculate the state of the VIRQ and VFIQ
lines in more cases than just "some EL2 GIC sysreg was written",
we will see calls to arm_cpu_set_irq() for "VIRQ is 0, VFIQ is 0"
even if the guest is not using the virtual LPI parts of the ITS
Remove the assertions, and instead simply ignore the state of the
VIRQ and VFIQ lines if the CPU does not have EL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-6-peter.maydell@linaro.org
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the implementation unit is page-vary.c.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In gen_store_exclusive(), if the host does not have a cmpxchg128
primitive then we generate bad code for STXP for storing two 64-bit
values. We generate a call to the exit_atomic helper, which never
returns, and set is_jmp to DISAS_NORETURN. However, this is
forgetting that we have already emitted a brcond that jumps over this
call for the case where we don't hold the exclusive. The effect is
that we don't generate any code to end the TB for the
exclusive-not-held execution path, which falls into the "exit with
TB_EXIT_REQUESTED" code that gen_tb_end() emits. This then causes an
assert at runtime when cpu_loop_exec_tb() sees an EXIT_REQUESTED TB
return that wasn't for an interrupt or icount.
In particular, you can hit this case when using the clang sanitizers
and trying to run the xlnx-versal-virt acceptance test in 'make
check-acceptance'. This bug was masked until commit 848126d11e
("meson: move int128 checks from configure") because we used to set
CONFIG_CMPXCHG128=1 and avoid the buggy codepath, but after that we
do not.
Fix the bug by not setting is_jmp. The code after the exit_atomic
call up to the fail_label is dead, but TCG is smart enough to
eliminate it. We do need to set 'tmp' to some valid value, though
(in the same way the exit_atomic-using code in tcg/tcg-op.c does).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/953
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220331150858.96348-1-peter.maydell@linaro.org
As per the AArch64.S2Walk() pseudo-code in the ARMv8 ARM, the final
decision as to the output address's PA space based on the SA/SW/NSA/NSW
bits needs to take the input IPA's PA space into account, and not the
PA space of the result of the stage 2 walk itself.
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220327093427.1548629-4-idan.horowitz@gmail.com
[PMM: fixed commit message typo]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As per the AArch64.SS2InitialTTWState() psuedo-code in the ARMv8 ARM the
initial PA space used for stage 2 table walks is assigned based on the SW
and NSW bits of the VSTCR and VTCR registers.
This was already implemented for the recursive stage 2 page table walks
in S1_ptw_translate(), but was missing for the final stage 2 walk.
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220327093427.1548629-3-idan.horowitz@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As per the AArch64.SS2OutputPASpace() psuedo-code in the ARMv8 ARM when the
PA space of the IPA is non secure, the output PA space is secure if and only
if all of the bits VTCR.<NSW, NSA>, VSTCR.<SW, SA> are not set.
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220327093427.1548629-2-idan.horowitz@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While not mentioned anywhere in the actual specification text, the
HCR_EL2.ATA bit is treated as '1' when EL2 is disabled at the current
security state. This can be observed in the psuedo-code implementation
of AArch64.AllocationTagAccessIsEnabled().
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220328173107.311267-1-idan.horowitz@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both of these functions missed handling the TLB_MMIO flag
during the conversion to handle MTE.
Fixes: 10a85e2c8a ("target/arm: Reuse sve_probe_page for gather loads")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/925
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220324010932.190428-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the rvbar property settable after realize. This is done
in preparation to model the ZynqMP's runtime configurable rvbar.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220316164645.2303510-3-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For M-profile, the fault address is not always exposed to the guest
in a fault register (for instance the BFAR bus fault address register
is only updated for bus faults on data accesses, not instruction
accesses). Currently we log the address only if we're putting it
into a particular guest-visible register. Since we always have it,
log it generically, to make logs of i-side faults a bit clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220315204306.2797684-3-peter.maydell@linaro.org
Currently the CPU_LOG_INT logging misses some useful information
about loads from the vector table. Add logging where we load vector
table entries. This is particularly helpful for cases where the user
has accidentally not put a vector table in their image at all, which
can result in confusing guest crashes at startup.
Here's an example of the new logging for a case where
the vector table contains garbage:
Loaded reset SP 0x0 PC 0x0 from vector table
Loaded reset SP 0xd008f8df PC 0xf000bf00 from vector table
Taking exception 3 [Prefetch Abort] on CPU 0
...with CFSR.IACCVIOL
...BusFault with BFSR.STKERR
...taking pending nonsecure exception 3
...loading from element 3 of non-secure vector table at 0xc
...loaded new PC 0x20000558
----------------
IN:
0x20000558: 08000079 stmdaeq r0, {r0, r3, r4, r5, r6}
(The double reset logging is the result of our long-standing
"CPUs all get reset twice" weirdness; it looks a bit ugly
but it'll go away if we ever fix that :-))
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220315204306.2797684-2-peter.maydell@linaro.org
LPAE descriptors come in three forms:
* table descriptors, giving the address of the next level page table
* page descriptors, which occur only at level 3 and describe the
mapping of one page (which might be 4K, 16K or 64K)
* block descriptors, which occur at higher page table levels, and
describe the mapping of huge pages
QEMU's page-table-walk code treats block and page entries
identically, simply ORing in a number of bits from the input virtual
address that depends on the level of the page table that we stopped
at; we depend on the previous masking of descaddr with descaddrmask
to have already cleared out the low bits of the descriptor word.
This is not quite right: the address field in a block descriptor is
smaller, and so there are bits which are valid address bits in a page
descriptor or a table descriptor but which are not supposed to be
part of the address in a block descriptor, and descaddrmask does not
clear them. We previously mostly got away with this because those
descriptor bits are RES0; however with FEAT_BBM (part of Armv8.4)
block descriptor bit 16 is defined to be the nT bit. No emulated
QEMU CPU has FEAT_BBM yet, but if the host CPU has it then we might
see it when using KVM or hvf.
Explicitly zero out all the descaddr bits we're about to OR vaddr
bits into.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/790
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220304165628.2345765-1-peter.maydell@linaro.org
When arm_is_el2_enabled was introduced, we missed
updating pauth_check_trap.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/788
Fixes: e6ef016926 ("target/arm: use arm_is_el2_enabled() where applicable")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220315021205.342768-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For both ldnt1 and stnt1, the meaning of the Rn and Rm are different
from ld1 and st1: the vector and integer registers are reversed, and
the integer register 31 refers to XZR instead of SP.
Secondly, the 64-bit version of ldnt1 was being interpreted as
32-bit unpacked unscaled offset instead of 64-bit unscaled offset,
which discarded the upper 32 bits of the address coming from
the vector argument.
Thirdly, validate that the memory element size is in range for the
vector element size for ldnt1. For ld1, we do this via independent
decode patterns, but for ldnt1 we need to do it manually.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/826
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220308031655.240710-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
-----BEGIN PGP SIGNATURE-----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=ix0J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220307' into staging
target-arm queue:
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
# gpg: Signature made Mon 07 Mar 2022 16:46:06 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220307:
hw/arm/virt: Disable LPA2 for -machine virt-6.2
target/arm: Provide cpu property for controling FEAT_LPA2
ui/cocoa: Use the standard about panel
hw/intc/arm_gicv3_cpuif: Fix register names in ICV_HPPIR read trace event
hw/intc/arm_gicv3: Fix missing spaces in error log messages
hw/intc/arm_gicv3: Specify valid and impl in MemoryRegionOps
hw/intc/arm_gicv3_its: Add trace events for table reads and writes
hw/intc/arm_gicv3_its: Add trace events for commands
target/arm/translate-neon: Simplify align field check for VLD3
target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
osdep: Move memalign-related functions to their own header
util: Put qemu_vfree() in memalign.c
util: Use meson checks for valloc() and memalign() presence
util: Share qemu_try_memalign() implementation between POSIX and Windows
meson.build: Don't misdetect posix_memalign() on Windows
util: Return valid allocation for qemu_try_memalign() with zero size
util: Unify implementations of qemu_memalign()
util: Make qemu_oom_check() a static function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG, allow
the feature to be disabled from -cpu max.
Since this kernel bug is present in the Fedora 31 image that
we test in avocado, disable lpa2 on the command-line.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For VLD3 (single 3-element structure to one lane), there is no
alignment specification and the alignment bits in the instruction
must be zero. This is bit [4] for the size=0 and size=1 cases, and
bits [5:4] for the size=2 case. We do this check correctly in
VLDST_single(), but we write it a bit oddly: in the 'case 3' code we
check for bit 0 of a->align (bit [4] of the insn), and then we fall
through to the 'case 2' code which checks bit 1 of a->align (bit [5]
of the insn) in the size 2 case. Replace this with just checking "is
a->align non-zero" for VLD3, which lets us drop the fall-through and
put the cases in this switch in numerical order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303113741.2156877-3-peter.maydell@linaro.org
For VLD1/VST1 (single element to one lane) we are only accessing one
register, and so the 'stride' is meaningless. The bits that would
specify stride (insn bit [4] for size=1, bit [6] for size=2) are
specified to be zero in the encoding (which would correspond to a
stride of 1 for VLD2/VLD3/VLD4 etc), and we must UNDEF if they are
not.
We failed to make this check, which meant that we would incorrectly
handle some instruction patterns as loads or stores instead of
UNDEFing them. Enforce that stride == 1 for the nregs == 1 case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/890
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303113741.2156877-2-peter.maydell@linaro.org
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
When we're using KVM, the PSCI implementation is provided by the
kernel, but QEMU has to tell the guest about it via the device tree.
Currently we look at the KVM_CAP_ARM_PSCI_0_2 capability to determine
if the kernel is providing at least PSCI 0.2, but if the kernel
provides a newer version than that we will still only tell the guest
it has PSCI 0.2. (This is fairly harmless; it just means the guest
won't use newer parts of the PSCI API.)
The kernel exposes the specific PSCI version it is implementing via
the ONE_REG API; use this to report in the dtb that the PSCI
implementation is 1.0-compatible if appropriate. (The device tree
binding currently only distinguishes "pre-0.2", "0.2-compatible" and
"1.0-compatible".)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220224134655.1207865-1-peter.maydell@linaro.org
