The Linux kernel on aarch64 creates a page table entry at early bootup
that spans the 2MB range on memory spanning the fdt start address:
[ ALIGN_DOWN(fdt, 2MB) ... ALIGN_DOWN(fdt, 2MB) + 2MB ]
This means that when our current 4k alignment happens to fall at the end
of the aligned region, Linux tries to access memory that is not mapped.
The easy fix is to instead increase the alignment to 2MB, making Linux's
logic always succeed.
We leave the existing 4k alignment for 32bit kernels to not cause any
regressions due to space constraints.
Reported-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SCTLR_EL3 cpreg definition was implicitly resetting the
register state to 0, which is both wrong and clashes with
the reset done via the SCTLR definition (since sctlr[3]
is unioned with sctlr_s). This went unnoticed until recently,
when an unrelated change (commit a903c449b4) happened to
perturb the order of enumeration through the cpregs hashtable for
reset such that the erroneous reset happened after the correct one
rather than before it. Fix this by marking SCTLR_EL3 as an alias,
so its reset is left up to the AArch32 view.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Version: GnuPG v1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=CaLG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cody/tags/jtc-for-upstream-pull-request' into staging
# gpg: Signature made Wed Jul 15 03:25:16 2015 BST using RSA key ID C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057
* remotes/cody/tags/jtc-for-upstream-pull-request:
block/curl: Don't lose original error when a connection fails.
mirror: correct buf_size
block: keep bitmap if incremental backup job is cancelled
blockdev: no need to drain in qmp_block_commit
block/mirror: Sleep periodically during bitmap scanning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a LWL, LWR, LDL or LDR instruction triggers a page fault, QEMU
currently reports the aligned address in CP0 BadVAddr, while the Windows
NT kernel expects the unaligned address.
This patch adds a byte access with the unaligned address at the
beginning of the LWL/LWR/LDL/LDR instructions to possibly trigger a page
fault and fill the QEMU TLB.
Cc: Leon Alrae <leon.alrae@imgtec.com>
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
For the MIPS N64 ABI when QEMU reads the break/trap instruction so that
it can inspect the break/trap code it reads 8 rather than 4 bytes
which means it finds the code field from the instruction after the
break/trap instruction. This then causes the break/trap handling
code to fail because it does not understand the code number.
The fix forces QEMU to always read 4 bytes of instruction data rather
than deciding how much to read based on the ABI.
Signed-off-by: Andrew Bennett <andrew.bennett@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
UHI assert and link operations call lock_user_string() twice to obtain two
strings pointed by gpr[4] and gpr[5]. If the second lock_user_string()
fails, then the first one won't get freed. Fix this by introducing another
macro responsible for obtaining two strings and handling allocation
failure.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Make use of CMPOP in floating-point compare instructions.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Fix Debug Mode flag clearing, and when DERET is placed between LL and SC
do not make SC fail.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
When syncing the task ASID with EntryHi, correctly or the value instead
of assigning it.
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
In the Release 6 of the MIPS Architecture, LL, SC, LLD, SCD, PREF
and CACHE instructions have 9 bits offsets.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
MSACSR.Cause bits are needed to be cleared before a vector floating-point
instructions.
FEXDO.df, FEXUPL.df and FEXUPR.df were missed out.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Fix core configuration for MIPS64R6-generic to make it as close as
I6400.
I6400 core has 48-bit of Virtual Address available (SEGBITS).
MIPS SIMD Architecture is available.
Rearrange order of bits to match the specification.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g6Rf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20150715-1' into staging
migration/next for 20150715
# gpg: Signature made Wed Jul 15 11:23:33 2015 BST using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/20150715-1:
migration: We also want to store the global state for savevm
migration: reduce the count of strlen call
migration: Register global state section before loadvm
migration: Write documetation for events capabilites
migration: Trace event and migration event are different things
migration: Only change state after migration has finished
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit df4b102452 introduced global_state
section. But it only filled the state while doing migration. While
doing a savevm, we stored an empty string as state. So when we did a
loadvm, it complained that state was invalid.
Fedora 21, 4.1.1, qemu 2.4.0-rc0
> ../../configure --target-list="x86_64-softmmu"
068 2s ... - output mismatch (see 068.out.bad)
--- /home/bos/jhuston/src/qemu/tests/qemu-iotests/068.out 2015-07-08
17:56:18.588164979 -0400
+++ 068.out.bad 2015-07-09 17:39:58.636651317 -0400
@@ -6,6 +6,8 @@
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm 0
(qemu) quit
+qemu-system-x86_64: Unknown savevm section or instance 'globalstate' 0
+qemu-system-x86_64: Error -22 while loading VM state
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
*** done
Failures: 068
Failed 1 of 1 tests
Actually, there were two problems here:
- we registered global_state too late for load_vm (fixed on another
patch on the list)
- we didn't store a valid state for savevm (fixed by this patch).
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
'strlen' is called three times in 'save_page_header', it's
inefficient.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We can want the trace event even without migration events enabled.
Reported-by: Wen Congyang <ghostwcy@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
On previous change, we changed state at post load time if it was not
running, special casing the "running" change. Now, we change any states
at the end of the migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently if qemu is connected to a curl source (eg. web server), and
the web server fails / times out / dies, you always see a bogus EIO
"Input/output error".
For example, choose a large file located on any local webserver which
you control:
$ qemu-img convert -p http://example.com/large.iso /tmp/test
Once it starts copying the file, stop the webserver and you will see
qemu-img fail with:
qemu-img: error while reading sector 61440: Input/output error
This patch does two things: Firstly print the actual error from curl
so it doesn't get lost. Secondly, change EIO to EPROTO. EPROTO is a
POSIX.1 compatible errno which more accurately reflects that there was
a protocol error, rather than some kind of hardware failure.
After this patch is applied, the error changes to:
$ qemu-img convert -p http://example.com/large.iso /tmp/test
qemu-img: curl: transfer closed with 469989 bytes remaining to read
qemu-img: error while reading sector 16384: Protocol error
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
If bus_size is less than 0, the command fails.
If buf_size is 0, use DEFAULT_MIRROR_BUF_SIZE.
If buf_size % granularity is not 0, mirror_free_init() will
do dangerous things.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 5555A588.3080907@cn.fujitsu.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reclaim the dirty bitmap if an incremental backup block job is
cancelled. The ret variable may be 0 when the job is cancelled so it's
not enough to check ret < 0.
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1434380534-7680-1-git-send-email-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Draining is not necessary, I/O can happen as soon as the
commit coroutine yields. Draining can be necessary before
reopening the file for read/write, or while modifying the
backing file chain, but that is done separately in
bdrv_reopen_multiple or bdrv_close; this particular
bdrv_drain_all does nothing for that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1432822903-25821-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Before, we only yield after initializing dirty bitmap, where the QMP
command would return. That may take very long, and guest IO will be
blocked.
Add sleep points like the later mirror iterations.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1431486673-19280-1-git-send-email-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
commit 213941d73b ("virtio-ccw: migrate ->revision") broke
migration:
2015-07-07T11:22:55.570968Z qemu-system-s390x: VQ 39 address 0x0 inconsistent with Host index 0x100
2015-07-07T11:22:55.571008Z qemu-system-s390x: error while loading state for instance 0x0 of
If thinint support is active, the config_load function returns early.
Make sure to load the revision all the time.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 213941d73b ("virtio-ccw: migrate ->revision")
Message-Id: <1436269643-66303-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The diag288 watchdog is no sysbus device, therefore it doesn't get
triggered on resets automatically using dc->reset.
Let's register the reset handler manually, so we get correctly notified
again when a system reset was requested. Also reset the watchdog on
subsystem resets that don't trigger a full system reset.
Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Apply the ceph settings from a config file before any ceph settings
from the command line. Since the ceph config file location may be
specified on the command line, parse it once to read the config file,
and do a second pass to apply the rest of the command line ceph
options.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To be safe, when cache=none is used ceph settings should not be able
to override it to turn on caching. This was previously possible with
rbd_cache=true in the rbd device configuration or a ceph configuration
file. Similarly, rbd settings could have turned off caching when qemu
requested it, although this would just be a performance problem.
Fix this by changing rbd's cache setting to match qemu after all other
ceph settings have been applied.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The old one still works for now, but will not work indefinitely.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RBDAIOCB.status was only used for cancel, which was removed in
7691e24dbe.
RBDAIOCB.sector_num was never used.
RADOSCB.done and rcbid were never used.
RBD_FD* are obsolete since the pipe was removed in
e04fb07fd1.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch moves bdrv_attach_child() from the individual places that add
a backing file to a BDS to bdrv_set_backing_hd(), which is called by all
of them. It also adds bdrv_detach_child() there.
For normal operation (starting with one backing file chain and not
changing it until the topmost image is closed) and live snapshots, this
constitutes no change in behaviour.
For all other cases, this is a fix for the bug that the old backing file
was still referenced as a child, and the new one wasn't referenced.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Block drivers may still want to access their child nodes in their
.bdrv_close handler. If they unref and/or detach a child by themselves,
this should not result in a double free.
There is additional code for backing files, which are just a special
case of child nodes. The same applies for them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is the counterpart for bdrv_open_child(). It decreases the
reference count of the child BDS and removes it from the list of
children of the given parent BDS.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
It is the same as bdrv_open_image(), except that it doesn't only return
success or failure, but the newly created BdrvChild object for the new
child node.
As the BdrvChild object already contains a BlockDriverState pointer (and
this is supposed to become the only pointer so that bdrv_append() and
friends can just change a single pointer in BdrvChild), the pbs
parameter is removed for bdrv_open_child().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Let the callers of bdrv_open_inherit() call bdrv_attach_child(). It
needs to be called in all cases where bdrv_open_inherit() succeeds (i.e.
returns 0) and a child_role is given.
bdrv_attach_child() is moved upwards to avoid a forward declaration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Implement support in Identify and Get/Set Features to properly report
and allow to change the Volatile Write Cache status reported by the
virtual NVMe device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implement a real flush instead of faking it. This is especially important
as Qemu assume Write back cashing by default and thus requires a working
cache flush operation for data integrity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 800567a61 updated the code to the generic crypto API
and mixed up encrypt and decrypt functions in
procotol_client_auth_vnc.
(Used to be: deskey(key, EN0) which encrypts, and was
changed to qcrypto_cipher_decrypt in 800567a61.)
Changed it to qcrypto_cipher_encrypt now.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVo6kaAAoJECgfDbjSjVRpEvcH/jiNHGHD+AzFSJ6+vcKH8MHY
GVyWxvnFimyusnv74c7nwTsRGjRycKCPFy8GN/ZX+VWpIpPwK9mysBQ97zM45xeM
T+w1eT4zXafZESr6coAaUu6AvPnVPmsx2im6j5LxBnyIzj41D7dydOM0dU/OHOSI
gUS2DlhqqRPqkB2LscIrkkCmiWpizxTACzZzrko+AuTZ6YVTOEWcnRps9gqR+MWF
o24uppNPIkkmKoWBbXEiTfTqy7rcWydCb/BiM0UMo2cTOeXESNiaQNbKL2ED8K5d
187sL9XCkBrImh4NOFMy4ZKsJ7Uy9zg+zpk03XbjMF+7S155Fcacp2ahDtuCoDA=
=DITH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio: fixes for 2.4
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon Jul 13 13:03:38 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc: fix reuse of pc-i440fx-2.4 in pc-i440fx-2.3
Revert "virtio-net: enable virtio 1.0"
virtio-pci: don't crash on illegal length
qdev: fix 64 bit properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit fddd179ab9,
"pc: Convert *_MACHINE_OPTIONS macros into functions"
broke the chaining of *_machine_options() functions on
pc-i440fx-2.3, at:
-#define PC_I440FX_2_3_MACHINE_OPTIONS \
- PC_I440FX_2_4_MACHINE_OPTIONS, \
- .alias = NULL, \
- .is_default = 0
+static void pc_i440fx_2_3_machine_options(QEMUMachine *m)
+{
+ pc_i440fx_machine_options(m);
+ m->alias = NULL;
+ m->is_default = 0;
+}
I have replaced PC_I440FX_2_4_MACHINE_OPTIONS with a
pc_i440fx_machine_options() call, instead of calling
pc_i440fx_2_4_machine_options(). This broke the setting of default_machine_opts
and default_display on pc-i440fx-{2.0,2,1,2.2,2.3}.
Fix this by making pc_i440fx_2_3_machine_options() reuse
pc_i440fx_2_4_machine_options().
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit df91055db5.
This is because:
- vhost support virtio 1.0 now
- transport code (e.g virtio-pci) set this feature when modern is
enabled, setting this unconditionally will break disable-modern=on.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some guests seem to access cfg with an illegal length value.
It's worth fixing them but debugging is easier if
qemu does not crash.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
64 bit props used 32 bit callbacks in two places, leading to broken
feature bits on virtio (example: got 0x31000000000006d4 which is
obviously bogus). Fix this.
Fixes: fdba6d96 ("qdev: add 64bit properties")
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 59227d5d45 did not update the
code in tcg/tci/tcg-target.c for those two cases.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1436556159-3002-1-git-send-email-sw@weilnetz.de
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
