The xtensa-test image generates a sra_i32 with count 0x40.
Whether this is accident of tcg constant propagation or
originating directly from the instruction stream is immaterial.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Don't use -ffixed-gN. Don't link statically. Don't save/restore
AREG0 around calls. Don't allocate space on the stack for AREG0 save.
Signed-off-by: Richard Henderson <rth@twiddle.net>
At the same time, split out the tlb load logic to a new function.
Fixes the cases of two data registers and two address registers.
Fixes the signature of, and adds missing, qemu_ld/st opcodes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Current code doesn't actually work in 32-bit mode at all. Since
no one really noticed, drop the complication of v7 and v8 cpus.
Eliminate the --sparc_cpu configure option and standardize macro
testing on TCG_TARGET_REG_BITS / HOST_LONG_BITS
Signed-off-by: Richard Henderson <rth@twiddle.net>
The address we pick in sparc64.ld is also 0x60000000, so doing a fixed map
on top of that is guaranteed to blow up. Choosing 0x40000000 is exactly
right for the max of code_gen_buffer_size set below.
No need to ever use MAP_FIXED. While getting our desired address helps
optimize the generated code, we won't fail if we don't get it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
When host and target have differing alignment rules, using a cast
and direct memory operation can result in SIGBUS. Use memcpy instead,
which the compiler will happily optimize when alignment is satisfied.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
* 'usb.65' of git://git.kraxel.org/qemu:
uhci: Don't queue up packets after one with the SPD flag set
usb-redir: Revert usb-redir part of commit 93bfef4c
usb-redir: Add chardev open / close debug logging
usb-redir: Add support for migration
usb-redir: Store max_packet_size in endp_data
usb-redir: Add an already_in_flight packet-id queue
usb-redir: Change cancelled packet code into a generic packet-id queue
ehci: Walk async schedule before and after migration
ehci: Don't set seen to 0 when removing unseen queue-heads
configure: usbredir fixes
ehci: Don't process too much frames in 1 timer tick (v2)
ehci: Fix interrupts stopping when Interrupt Threshold Control is 8
ehci: switch to new-style memory ops
usb-host: allow emulated (non-async) control requests without USBPacket
The CONFIG_TCG_PASS_AREG0 code for calling ld/st helpers
was not respecting the ABI requirement for 64-bit values
being aligned in registers.
Mirror the ARM port in use of helper functions to marshal
arguments into the correct registers.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Neither of these functions were performing double-word
compares properly.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 6375e09e changed the type of TranslationBlock.tb_next,
but failed to change the type of TCGContext.tb_next.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We have to use different type to access float values when
USE_SOFTFLOAT_STRUCT_TYPES is defined.
Rework SH4 version of cpu_gdb_{read,write}_register() using
a single case, and fixing the coding style. Use ldll_p() and
stfl_p() to access float values.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
While swapping constants to the second operand, swap
sources matching destinations to the first operand.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For proper cmov insns, as well as the non-goto-tb case
of conditional branch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implemented with setcond if the target does not provide
the optional opcode.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We should avoid accessing env at translation stage, except of course for
static values like the supported features.
Remove variables copied from env in DisasContext and use the TB flags
instead.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit fd4bab102 PC is restored in case of exception through code
retranslation. While it is clearly the thing to do in case it is not
not known if an helper is going to trigger an exception or not
(e.g. for load/store, FPU, etc.), it just make things slower when the
exception is already known at translation time.
Partially revert this commit and save PC in the TCG code. Set bstate to
BS_BRANCH to not generate TCG exit code. Micro-optimize the sleep
helper. Make all the exception helpers to call raise_exception and mark
it as noreturn.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
gen_clr_t() and gen_set_t() have very few callers and can be remplaced
by a single line. Remove them.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
It's possible swap the two 16-bit words of a 32-bit register using a
rotation. If the TCG target doesn't implement rotation, the replacement
code is similar to the previously implemented code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The register being 32 bit long, after a shift to the right by 16 bits,
the upper 16 bit are already cleared. There is no need to call ext16u
to clear them.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
addv and subv helpers implementation is directly copied from the SH4
manual and looks quite complex. It is however possible to explain it
without branches, and is therefore possible to implement it with TCG.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is no need to add a SH4 specific pickNaNMulAdd() to softfloat as
SH4 is always returning a default NaN.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Unconditional gen_check_loop_end at the end of disas_xtensa_insn
can emit tcg_gen_goto_tb with slot id already used in the TB (e.g. when
TB ends at LEND with a branch).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: malc <av1474@comtv.ru>
Commit e31b0a7c05 fixed copy propagation on
32-bit host by restricting the copy between different types. This was the
wrong fix.
The real problem is that the all temps states should be reset at the end
of a basic block. This was done by adding such operations in the switch,
but brcond2 was forgotten (that's why the crash was only observed on 32-bit
hosts).
Fix that by looking at the TCG_OPF_BB_END instead. We need to keep the case
for op_set_label as temps might be modified through another path.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implements all of the COP2 instructions except for the S<cond>
family of comparisons. The documentation is unclear for those.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
this will prevent some of the compilation errors with debugging
enabled from creeping back in.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The macro uses the DisasContext. Pass it around as needed.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Used by MIPS_DEBUG, when enabled.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Drop the private reimplementation of ctz32() from pflash_cfi0[12]
in favour of using the standard version from host-utils.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
pflash_cfi01 announces a version number of 1.1, which implies
"Protection Register Information" and "Burst Read information"
sections, which are not provided.
Decrease the version number to 1.0 so that only the "Protection
Register Information" section is needed.
Set the number of protection fields (0x3f) to 0x01, as 0x00 means 256
protections field, which makes the CFI table bigger than the current
implementation, causing some kernels to fail to read it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Given the copy propagation breakage on 32-bit hosts has been fixed
commit e31b0a7c05 can be reverted.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
set_label is effectively the end of a basic block, as no optimization
can be made accross it. It was treated as such in the liveness analysis
code, but as a special case.
Mark it with TCG_OPF_BB_END flag so that this information can be used
by other parts of the TCG code, and remove the special case in the liveness
analysis code.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On x86, it is possible to move a constant value to memory. Add code to
handle a constant argument to load/store ops.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There was a missing include of qemu-log and a variable name in a printf was out
of date.
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Assert that the ethernet and dma controller are sucessfully linked to their
peers.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
The "frequency" qdev prop matches the "clock-frequency" property in Xilinx EDK.
Renamed "frequency" -> "clock-frequency" accordingly.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
