Handle HostMemoryBackend creation and setting of ms->ram entirely in
machine_run_board_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make -m syntactic sugar for a compound property "-machine
mem.{size,max-size,slots}". The new property does not have
the magic conversion to megabytes of unsuffixed arguments,
and also does not understand that "0" means the default size
(you have to leave it out to get the default). This means
that we need to convert the QemuOpts by hand to a QDict.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make -boot syntactic sugar for a compound property "-machine boot.{order,menu,...}".
machine_boot_parse is replaced by the setter for the property.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As part of converting -boot to a property with a QAPI type, define
the struct and use it throughout QEMU to access boot configuration.
machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by
hand, for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running 'make check' we only get a summary of progress on the
console. Fortunately meson/ninja have saved the raw test output to a
logfile. Exposing this log will make it easier to debug failures that
happen in CI.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220509124134.867431-3-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When running I/O tests using TAP output mode, we get a single TAP test
with a sub-test reported for each I/O test that is run. The output looks
something like this:
1..123
ok qcow2 011
ok qcow2 012
ok qcow2 013
ok qcow2 217
...
If everything runs or fails normally this is fine, but periodically we
have been seeing the test harness abort early before all 123 tests have
been run, just leaving a fairly useless message like
TAP parsing error: Too few tests run (expected 123, got 107)
we have no idea which tests were running at the time the test harness
abruptly exited. This change causes us to print a message about our
intent to run each test, so we have a record of what is active at the
time the harness exits abnormally.
1..123
# running qcow2 011
ok qcow2 011
# running qcow2 012
ok qcow2 012
# running qcow2 013
ok qcow2 013
# running qcow2 217
ok qcow2 217
...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220509124134.867431-2-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When stdout is not a terminal, the buffer may not be flushed at each end
of line, so we should flush after each test is done. This is especially
apparent when run by check-block, in two ways:
First, when running make check-block -jX with X > 1, progress indication
was missing, even though testrunner.py does theoretically print each
test's status once it has been run, even in multi-processing mode.
Flushing after each test restores this progress indication.
Second, sometimes make check-block failed altogether, with an error
message that "too few tests [were] run". I presume that's because one
worker process in the job pool did not get to flush its stdout before
the main process exited, and so meson did not get to see that worker's
test results. In any case, by flushing at the end of run_test(), the
problem has disappeared for me.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220506134215.10086-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 4c41c69e changed the way the coroutine pool is sized because for
virtio-blk devices with a large queue size and heavy I/O, it was just
too small and caused coroutines to be deleted and reallocated soon
afterwards. The change made the size dynamic based on the number of
queues and the queue size of virtio-blk devices.
There are two important numbers here: Slightly simplified, when a
coroutine terminates, it is generally stored in the global release pool
up to a certain pool size, and if the pool is full, it is freed.
Conversely, when allocating a new coroutine, the coroutines in the
release pool are reused if the pool already has reached a certain
minimum size (the batch size), otherwise we allocate new coroutines.
The problem after commit 4c41c69e is that it not only increases the
maximum pool size (which is the intended effect), but also the batch
size for reusing coroutines (which is a bug). It means that in cases
with many devices and/or a large queue size (which defaults to the
number of vcpus for virtio-blk-pci), many thousand coroutines could be
sitting in the release pool without being reused.
This is not only a waste of memory and allocations, but it actually
makes the QEMU process likely to hit the vm.max_map_count limit on Linux
because each coroutine requires two mappings (its stack and the guard
page for the stack), causing it to abort() in qemu_alloc_stack() because
when the limit is hit, mprotect() starts to fail with ENOMEM.
In order to fix the problem, change the batch size back to 64 to avoid
uselessly accumulating coroutines in the release pool, but keep the
dynamic maximum pool size so that coroutines aren't freed too early
in heavy I/O scenarios.
Note that this fix doesn't strictly make it impossible to hit the limit,
but this would only happen if most of the coroutines are actually in use
at the same time, not just sitting in a pool. This is the same behaviour
as we already had before commit 4c41c69e. Fully preventing this would
require allowing qemu_coroutine_create() to return an error, but it
doesn't seem to be a scenario that people hit in practice.
Cc: qemu-stable@nongnu.org
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2079938
Fixes: 4c41c69e05
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220510151020.105528-3-kwolf@redhat.com>
Tested-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's true that these functions currently affect the batch size in which
coroutines are reused (i.e. moved from the global release pool to the
allocation pool of a specific thread), but this is a bug and will be
fixed in a separate patch.
In fact, the comment in the header file already just promises that it
influences the pool size, so reflect this in the name of the functions.
As a nice side effect, the shorter function name makes some line
wrapping unnecessary.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220510151020.105528-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Up to now the virt-machine node contains a virtio-mmio node.
However no driver produces any PCI interface node. Hence, PCI
tests cannot be run with aarch64 binary.
Add a GPEX driver node that produces a pci interface node. This latter
then can be consumed by all the pci tests. One of the first motivation
was to be able to run the virtio-iommu-pci tests.
We still face an issue with pci hotplug tests as hotplug cannot happen
on the pcie root bus and require a generic root port. This will be
addressed later on.
We force cpu=max along with aarch64/virt machine as some PCI tests
require high MMIO regions to be available.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20220504152025.1785704-4-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM does not not support hotplug on pcie.0. Add a flag on the bus
which tells if devices can be hotplugged and skip hotplug tests
if the bus cannot be hotplugged. This is a temporary solution to
enable the other pci tests on aarch64.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220504152025.1785704-3-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment the IO space limit is hardcoded to
QPCI_PIO_LIMIT = 0x10000. When accesses are performed to a bar,
the base address of this latter is compared against the limit
to decide whether we perform an IO or a memory access.
On ARM, we cannot keep this PIO limit as the arm-virt machine
uses [0x3eff0000, 0x3f000000 ] for the IO space map and we
are mandated to allocate at 0x0.
Add a new flag in QPCIBar indicating whether it is an IO bar
or a memory bar. This flag is set on QPCIBar allocation and
provisionned based on the BAR configuration. Then the new flag
is used in access functions and in iomap() function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220504152025.1785704-2-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that igd_passthrough_isa_bridge_create() is implemented within the
xen context it may use Xen* data types directly and become
xen_igd_passthrough_isa_bridge_create(). This resolves an indirection.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20220326165825.30794-3-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
igd-passthrough-isa-bridge is only requested in xen_pt but was
implemented in pc_piix.c. This caused xen_pt to dependend on i386/pc
which is hereby resolved.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20220326165825.30794-2-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Without this (at least in Fedora 35) it don't detect mremap()
correctly.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220502131119.2345-1-quintela@redhat.com>
[Also switch the LEGACY_RDMA_REG_MR test to cc.links, otherwise
Debian fails to build. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the string equality operator "eq", and ensure that $1 is defined by
using "(try|)" instead of "(try)?". The alternative "((?:try)?)" is
longer and less readable.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cache_info_passthrough is requested, QEMU passes the host values
of the cache information CPUID leaves down to the guest. However,
it blindly assumes that the CPUID leaf exists on the host, and this
cannot be guaranteed: for example, KVM has recently started to
synthesize AMD leaves up to 0x80000021 in order to provide accurate
CPU bug information to guests.
Querying a nonexistent host leaf fills the output arguments of
host_cpuid with data that (albeit deterministic) is nonsensical
as cache information, namely the data in the highest Intel CPUID
leaf. If said highest leaf is not ECX-dependent, this can even
cause an infinite loop when kvm_arch_init_vcpu prepares the input
to KVM_SET_CPUID2. The infinite loop is only terminated by an
abort() when the array gets full.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not rely on the detection that was done in the configure script,
since in the future we may want to cross-compile this file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-5-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
used for async I/O.
- Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
=t5eR
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
- Add new thread-pool-min/thread-pool-max parameters to control the thread pool
used for async I/O.
- Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr
# c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l
# iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC
# 4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI
# Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP
# 08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz
# NJNBg5Ldszwj4PDZ1dFU3/03aigb3g==
# =t5eR
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 May 2022 05:52:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
virtio-scsi: move request-related items from .h to .c
virtio-scsi: clean up virtio_scsi_handle_cmd_vq()
virtio-scsi: clean up virtio_scsi_handle_ctrl_vq()
virtio-scsi: clean up virtio_scsi_handle_event_vq()
virtio-scsi: don't waste CPU polling the event virtqueue
virtio-scsi: fix ctrl and event handler functions in dataplane mode
util/event-loop-base: Introduce options to set the thread pool size
util/main-loop: Introduce the main loop into QOM
Introduce event-loop-base abstract class
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the PPTT table is built, the CPU topology is re-calculated, but
it's unecessary because the CPU topology has been populated in
virt_possible_cpu_arch_ids() on arm/virt machine.
This reworks build_pptt() to avoid by reusing the existing IDs in
ms->possible_cpus. Currently, the only user of build_pptt() is
arm/virt machine.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20220503140304.855514-7-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When CPU-to-NUMA association isn't explicitly provided by users,
the default one is given by mc->get_default_cpu_node_id(). However,
the CPU topology isn't fully considered in the default association
and this causes CPU topology broken warnings on booting Linux guest.
For example, the following warning messages are observed when the
Linux guest is booted with the following command lines.
/home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \
-accel kvm -machine virt,gic-version=host \
-cpu host \
-smp 6,sockets=2,cores=3,threads=1 \
-m 1024M,slots=16,maxmem=64G \
-object memory-backend-ram,id=mem0,size=128M \
-object memory-backend-ram,id=mem1,size=128M \
-object memory-backend-ram,id=mem2,size=128M \
-object memory-backend-ram,id=mem3,size=128M \
-object memory-backend-ram,id=mem4,size=128M \
-object memory-backend-ram,id=mem4,size=384M \
-numa node,nodeid=0,memdev=mem0 \
-numa node,nodeid=1,memdev=mem1 \
-numa node,nodeid=2,memdev=mem2 \
-numa node,nodeid=3,memdev=mem3 \
-numa node,nodeid=4,memdev=mem4 \
-numa node,nodeid=5,memdev=mem5
:
alternatives: patching kernel code
BUG: arch topology borken
the CLS domain not a subset of the MC domain
<the above error log repeats>
BUG: arch topology borken
the DIE domain not a subset of the NODE domain
With current implementation of mc->get_default_cpu_node_id(),
CPU#0 to CPU#5 are associated with NODE#0 to NODE#5 separately.
That's incorrect because CPU#0/1/2 should be associated with same
NUMA node because they're seated in same socket.
This fixes the issue by considering the socket ID when the default
CPU-to-NUMA association is provided in virt_possible_cpu_arch_ids().
With this applied, no more CPU topology broken warnings are seen
from the Linux guest. The 6 CPUs are associated with NODE#0/1, but
there are no CPUs associated with NODE#2/3/4/5.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-id: 20220503140304.855514-6-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In aarch64_numa_cpu(), the CPU and NUMA association is something
like below. Two threads in the same core/cluster/socket are
associated with two individual NUMA nodes, which is unreal as
Igor Mammedov mentioned. We don't expect the association to break
NUMA-to-socket boundary, which matches with the real world.
NUMA-node socket cluster core thread
------------------------------------------
0 0 0 0 0
1 0 0 0 1
This corrects the topology for CPUs and their association with
NUMA nodes. After this patch is applied, the CPU and NUMA
association becomes something like below, which looks real.
Besides, socket/cluster/core/thread IDs are all checked when
the NUMA node IDs are verified. It helps to check if the CPU
topology is properly populated or not.
NUMA-node socket cluster core thread
------------------------------------------
0 1 0 0 0
1 0 0 0 0
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-5-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, the SMP configuration isn't considered when the CPU
topology is populated. In this case, it's impossible to provide
the default CPU-to-NUMA mapping or association based on the socket
ID of the given CPU.
This takes account of SMP configuration when the CPU topology
is populated. The die ID for the given CPU isn't assigned since
it's not supported on arm/virt machine. Besides, the used SMP
configuration in qtest/numa-test/aarch64_numa_cpu() is corrcted
to avoid testing failure
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-4-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPU topology isn't enabled on arm/virt machine yet, but we're
going to do it in next patch. After the CPU topology is enabled by
next patch, "thread-id=1" becomes invalid because the CPU core is
preferred on arm/virt machine. It means these two CPUs have 0/1
as their core IDs, but their thread IDs are all 0. It will trigger
test failure as the following message indicates:
[14/21 qemu:qtest+qtest-aarch64 / qtest-aarch64/numa-test ERROR
1.48s killed by signal 6 SIGABRT
>>> G_TEST_DBUS_DAEMON=/home/gavin/sandbox/qemu.main/tests/dbus-vmstate-daemon.sh \
QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon \
QTEST_QEMU_BINARY=./qemu-system-aarch64 \
QTEST_QEMU_IMG=./qemu-img MALLOC_PERTURB_=83 \
/home/gavin/sandbox/qemu.main/build/tests/qtest/numa-test --tap -k
――――――――――――――――――――――――――――――――――――――――――――――
stderr:
qemu-system-aarch64: -numa cpu,node-id=0,thread-id=1: no match found
This fixes the issue by providing comprehensive SMP configurations
in aarch64_numa_cpu(). The SMP configurations aren't used before
the CPU topology is enabled in next patch.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-id: 20220503140304.855514-3-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds cluster-id in CPU instance properties, which will be used
by arm/virt machine. Besides, the cluster-id is also verified or
dumped in various spots:
* hw/core/machine.c::machine_set_cpu_numa_node() to associate
CPU with its NUMA node.
* hw/core/machine.c::machine_numa_finish_cpu_init() to record
CPU slots with no NUMA mapping set.
* hw/core/machine-hmp-cmds.c::hmp_hotpluggable_cpus() to dump
cluster-id.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-2-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The sbsa-ref machine is continuously evolving. Some of the changes we
want to make in the near future, to align with real components (e.g.
the GIC-700), will break compatibility for existing firmware.
Introduce two new properties to the DT generated on machine generation:
- machine-version-major
To be incremented when a platform change makes the machine
incompatible with existing firmware.
- machine-version-minor
To be incremented when functionality is added to the machine
without causing incompatibility with existing firmware.
to be reset to 0 when machine-version-major is incremented.
This versioning scheme is *neither*:
- A QEMU versioned machine type; a given version of QEMU will emulate
a given version of the platform.
- A reflection of level of SBSA (now SystemReady SR) support provided.
The version will increment on guest-visible functional changes only,
akin to a revision ID register found on a physical platform.
These properties are both introduced with the value 0.
(Hence, a machine where the DT is lacking these nodes is equivalent
to version 0.0.)
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20220505113947.75714-1-quic_llindhol@quicinc.com
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Radoslaw Biernacki <rad@semihalf.com>
Cc: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable the n1 for virt and sbsa board use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable the a76 for virt and sbsa board use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns not merging memory access, which TCG does
not implement. Thus we can trivially enable this feature.
Add a comment to handle_hint for the DGH instruction, but no code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns cache speculation, which TCG does
not implement. Thus we can trivially enable this feature.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no branch prediction in TCG, therefore there is no
need to actually include the context number into the predictor.
Therefore all we need to do is add the state for SCXTNUM_ELx.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns branch speculation, which TCG does
not implement. Thus we can trivially enable this feature.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is AArch64 only, and applies to physical SErrors,
which QEMU does not implement, thus the feature is a nop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check for and defer any pending virtual SError.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Virtual SError exceptions are raised by setting HCR_EL2.VSE,
and are routed to EL1 just like other virtual exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable writes to the TERR and TEA bits when RAS is enabled.
These bits are otherwise RES0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add only the system registers required to implement zero error
records. This means that all values for ERRSELR are out of range,
which means that it and all of the indexed error record registers
need not be implemented.
Add the EL2 registers required for injecting virtual SError.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This extension concerns changes to the External Debug interface,
with Secure and Non-secure access to the debug registers, and all
of it is outside the scope of QEMU. Indicating support for this
is mandatory with FEAT_SEL2, which we do implement.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only portion of FEAT_Debugv8p2 that is relevant to QEMU
is CONTEXTIDR_EL2, which is also conditionally implemented
with FEAT_VHE. The rest of the debug extension concerns the
External debug interface, which is outside the scope of QEMU.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use FIELD_DP{32,64} to manipulate id_pfr1 and id_aa64pfr0
during arm_cpu_realizefn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the legacy feature names to the current names.
Provide feature names for id changes that were not marked.
Sort the field updates into increasing bitfield order.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Share the code to set AArch32 max features so that we no
longer have code drift between qemu{-system,}-{arm,aarch64}.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
