Currently the code in target/arm/helper.c mostly checks the PAN bits
in env->pstate or env->uncached_cpsr directly when it wants to know
if PAN is enabled, because in most callsites we know whether we are
in AArch64 or AArch32. We do have an arm_pan_enabled() function, but
we only use it in a few places where the code might run in either an
AArch32 or AArch64 context.
For FEAT_NV, when HCR_EL2.{NV,NV1} is {1,1} PAN is always disabled
even when the PSTATE.PAN bit is set, the "is PAN enabled" test
becomes more complicated. Make all places that check for PAN use
arm_pan_enabled(), so we have a place to put the FEAT_NV test.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
When HCR_EL2.{NV,NV1} is {1,1} we must trap five extra registers to
EL2: VBAR_EL1, ELR_EL1, SPSR_EL1, SCXTNUM_EL1 and TFSR_EL1.
Implement these traps.
This trap does not apply when FEAT_NV2 is implemented and enabled;
include the check that HCR_EL2.NV2 is 0 here, to save us having
to come back and add it later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV requires that when HCR_EL2.{NV,NV1} == {1,0} and an exception
is taken from EL1 to EL1 then the reported EL in SPSR_EL1.M should be
EL2, not EL1. Implement this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV requires that when HCR_EL2.NV is set reads of the CurrentEL
register from EL1 always report EL2 rather than the real EL.
Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
For FEAT_NV, accesses to system registers and instructions from EL1
which would normally UNDEF there but which work in EL2 need to
instead be trapped to EL2. Detect this both for "we know this will
UNDEF at translate time" and "we found this UNDEFs at runtime", and
make the affected registers trap to EL2 instead.
The Arm ARM defines the set of registers that should trap in terms
of their names; for our implementation this would be both awkward
and inefficent as a test, so we instead trap based on the opc1
field of the sysreg. The regularity of the architectural choice
of encodings for sysregs means that in practice this captures
exactly the correct set of registers.
Regardless of how we try to define the registers this trapping
applies to, there's going to be a certain possibility of breakage
if new architectural features introduce new registers that don't
follow the current rules (FEAT_MEC is one example already visible
in the released sysreg XML, though not yet in the Arm ARM). This
approach seems to me to be straightforward and likely to require
a minimum of manual overrides.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
In handle_sys() we don't do the check for whether the register is
marked as needing an FPU/SVE/SME access check until after we've
handled the special cases covered by ARM_CP_SPECIAL_MASK. This is
conceptually the wrong way around, because if for example we happen
to implement an FPU-access-checked register as ARM_CP_NOP, we should
do the access check first.
Move the access checks up so they are with all the other access
checks, not sandwiched between the special-case read/write handling
and the normal-case read/write handling. This doesn't change
behaviour at the moment, because we happen not to define any
cpregs with both ARM_CPU_{FPU,SVE,SME} and one of the cases
dealt with by ARM_CP_SPECIAL_MASK.
Moving this code also means we have the correct place to put the
FEAT_NV/FEAT_NV2 access handling, which should come after the access
checks and before we try to do any read/write action.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV and FEAT_NV2 will allow EL1 to attempt to access cpregs that
only exist at EL2. This means we're going to want to run their
accessfns when the CPU is at EL1. In almost all cases, the behaviour
we want is "the accessfn returns OK if at EL1".
Mostly the accessfn already does the right thing; in a few cases we
need to explicitly check that the EL is not 1 before applying various
trap controls, or split out an accessfn used both for an _EL1 and an
_EL2 register into two so we can handle the FEAT_NV case correctly
for the _EL2 register.
There are two registers where we want the accessfn to trap for
a FEAT_NV EL1 access: VSTTBR_EL2 and VSTCR_EL2 should UNDEF
an access from NonSecure EL1, not trap to EL2 under FEAT_NV.
The way we have written sel2_access() already results in this
behaviour.
We can identify the registers we care about here because they
all have opc1 == 4 or 5.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
The alias registers like SCTLR_EL12 only exist when HCR_EL2.E2H
is 1; they should UNDEF otherwise. We weren't implementing this.
Add an intercept of the accessfn for these aliases, and implement
the UNDEF check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
For FEAT_VHE, we define a set of register aliases, so that for instance:
* the SCTLR_EL1 either accesses the real SCTLR_EL1, or (if E2H is 1)
SCTLR_EL2
* a new SCTLR_EL12 register accesses SCTLR_EL1 if E2H is 1
However when we create the 'new_reg' cpreg struct for the SCTLR_EL12
register, we duplicate the information in the SCTLR_EL1 cpreg, which
means the opcode fields are those of SCTLR_EL1, not SCTLR_EL12. This
is a problem for code which looks at the cpreg opcode fields to
determine behaviour (e.g. in access_check_cp_reg()). In practice
the current checks we do there don't intersect with the *_EL12
registers, but for FEAT_NV this will become a problem.
Write the correct values from the encoding into the new_reg struct.
This restores the invariant that the cpreg that you get back
from the hashtable has opcode fields that match the key you used
to retrieve it.
When we call the readfn or writefn for the target register, we
pass it the cpreg struct for that target register, not the one
for the alias, in case the readfn/writefn want to look at the
opcode fields to determine behaviour. This means we need to
interpose custom read/writefns for the e12 aliases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
The TBFLAG_A64 TB flag bits go in flags2, which for AArch64 guests
we know is 64 bits. However at the moment we use FIELD_EX32() and
FIELD_DP32() to read and write these bits, which only works for
bits 0 to 31. Since we're about to add a flag that uses bit 32,
switch to FIELD_EX64() and FIELD_DP64() so that this will work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
The HCR_EL2.TSC trap for trapping EL1 execution of SMC instructions
has a behaviour change for FEAT_NV when EL3 is not implemented:
* in older architecture versions TSC was required to have no
effect (i.e. the SMC insn UNDEFs)
* with FEAT_NV, when HCR_EL2.NV == 1 the trap must apply
(i.e. SMC traps to EL2, as it already does in all cases when
EL3 is implemented)
* in newer architecture versions, the behaviour either without
FEAT_NV or with FEAT_NV and HCR_EL2.NV == 0 is relaxed to
an IMPDEF choice between UNDEF and trap-to-EL2 (i.e. it is
permitted to always honour HCR_EL2.TSC) for AArch64 only
Add the condition to honour the trap bit when HCR_EL2.NV == 1. We
leave the HCR_EL2.NV == 0 case with the existing (UNDEF) behaviour,
as our IMPDEF choice (both because it avoids a behaviour change
for older CPU models and because we'd have to distinguish AArch32
from AArch64 if we opted to trap to EL2).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
When FEAT_NV is turned on via the HCR_EL2.NV bit, ERET instructions
are trapped, with the same syndrome information as for the existing
FEAT_FGT fine-grained trap (in the pseudocode this is handled in
AArch64.CheckForEretTrap()).
Rename the DisasContext and tbflag bits to reflect that they are
no longer exclusively for FGT traps, and set the tbflag bit when
FEAT_NV is enabled as well as when the FGT is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
The FEAT_NV HCR_EL2.AT bit enables trapping of some address
translation instructions from EL1 to EL2. Implement this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV defines three new bits in HCR_EL2: NV, NV1 and AT. When the
feature is enabled, allow these bits to be written, and flush the
TLBs for the bits which affect page table interpretation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
The CTR_EL0 register has some bits which allow the implementation to
tell the guest that it does not need to do cache maintenance for
data-to-instruction coherence and instruction-to-data coherence.
QEMU doesn't emulate caches and so our cache maintenance insns are
all NOPs.
We already have some models of specific CPUs where we set these bits
(e.g. the Neoverse V1), but the 'max' CPU still uses the settings it
inherits from Cortex-A57. Set the bits for 'max' as well, so the
guest doesn't need to do unnecessary work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
The term "iothread lock" is obsolete. The APIs use Big QEMU Lock (BQL)
in their names. Update the code comments to use "BQL" instead of
"iothread lock".
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20240102153529.486531-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use generic cpu_model_from_type() when the CPU model name needs to
be extracted from the CPU type name.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231114235628.534334-23-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
For all targets, the CPU class returned from CPUClass::class_by_name()
and object_class_dynamic_cast(oc, CPU_RESOLVING_TYPE) need to be
compatible. Lets apply the check in cpu_class_by_name() for once,
instead of having the check in CPUClass::class_by_name() for individual
target.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Message-ID: <20231114235628.534334-4-gshan@redhat.com>
config_all now lists only accelerators, rename it to indicate its actual
content.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-4-richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-3-richard.henderson@linaro.org>
MDCR_EL2.HPMN allows an hypervisor to limit the number of PMU counters
available to EL1 and EL0 (to keep the others to itself). QEMU already
implements this split correctly, except for PMCR_EL0.N reads: the number
of counters read by EL1 or EL0 should be the one configured in
MDCR_EL2.HPMN.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20231215144652.4193815-2-jean-philippe@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hardware accelerators handle that in *hardware*.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231130142519.28417-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231130142519.28417-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The system registers DBGVCR32_EL2, FPEXC32_EL2, DACR32_EL2 and
IFSR32_EL2 are present only to allow an AArch64 EL2 or EL3 to read
and write the contents of an AArch32-only system register. The
architecture requires that they are present only when EL1 can be
AArch32, but we implement them unconditionally. This was OK when all
our CPUs supported AArch32 EL1, but we have quite a lot of CPU models
now which only support AArch64 at EL1:
a64fx
cortex-a76
cortex-a710
neoverse-n1
neoverse-n2
neoverse-v1
Only define these registers for CPUs which allow AArch32 EL1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231121144605.3980419-1-peter.maydell@linaro.org
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-17-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-16-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-15-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-14-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-13-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-12-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify the "kvm_arm.h" API: All functions related to ARM vCPUs
take a ARMCPU* argument. Use the CPU() QOM cast macro When
calling the generic vCPU API from "sysemu/kvm.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-4-philmd@linaro.org
[PMM: fix parameter name in doc comment too]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both MemoryRegion and Error types are forward declared
in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231123183518.64569-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop fprintfs and actually use the return values in the callers.
This is OK to do since commit 7191f24c7f which added the
error-check to the generic accel/kvm functions that eventually
call into these ones.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: tweak commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no need to do this in kvm_arch_init_vcpu per vcpu.
Inline kvm_arm_init_serror_injection rather than keep separate.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since kvm32.c was removed, there is no need to keep them separate.
This will allow more symbols to be unexported.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: retain copyright lines from kvm64.c in kvm.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: merged two duplicate comments, as suggested by Gavin]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use a switch instead of a linear search through data.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is only used once, and is quite simple.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The KVM_CAP_SET_GUEST_DEBUG is probed during kvm_init().
gdbserver will fail to start if the CAP is not supported.
So no need to make another probe here, like other targets.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231025070726.22689-1-duchao@eswincomputing.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no architectural requirement that SME implies SVE, but
our implementation currently assumes it. (FEAT_SME_FA64 does
imply SVE.) So if you try to run a CPU with eg "-cpu max,sve=off"
you quickly run into an assert when the guest tries to write to
SMCR_EL1:
#6 0x00007ffff4b38e96 in __GI___assert_fail
(assertion=0x5555566e69cb "sm", file=0x5555566e5b24 "../../target/arm/helper.c", line=6865, function=0x5555566e82f0 <__PRETTY_FUNCTION__.31> "sve_vqm1_for_el_sm") at ./assert/assert.c:101
#7 0x0000555555ee33aa in sve_vqm1_for_el_sm (env=0x555557d291f0, el=2, sm=false) at ../../target/arm/helper.c:6865
#8 0x0000555555ee3407 in sve_vqm1_for_el (env=0x555557d291f0, el=2) at ../../target/arm/helper.c:6871
#9 0x0000555555ee3724 in smcr_write (env=0x555557d291f0, ri=0x555557da23b0, value=2147483663) at ../../target/arm/helper.c:6995
#10 0x0000555555fd1dba in helper_set_cp_reg64 (env=0x555557d291f0, rip=0x555557da23b0, value=2147483663) at ../../target/arm/tcg/op_helper.c:839
#11 0x00007fff60056781 in code_gen_buffer ()
Avoid this unsupported and slightly odd combination by
disabling SME when SVE is not present.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2005
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231127173318.674758-1-peter.maydell@linaro.org
In commit edac4d8a16 back in 2015 when we added support for
the virtual timer offset CNTVOFF_EL2, we didn't correctly update
the timer-recalculation code that figures out when the timer
interrupt is next going to change state. We got it wrong in
two ways:
* for the 0->1 transition, we didn't notice that gt->cval + offset
can overflow a uint64_t
* for the 1->0 transition, we didn't notice that the transition
might now happen before the count rolls over, if offset > count
In the former case, we end up trying to set the next interrupt
for a time in the past, which results in QEMU hanging as the
timer fires continuously.
In the latter case, we would fail to update the interrupt
status when we are supposed to.
Fix the calculations in both cases.
The test case is Alex Bennée's from the bug report, and tests
the 0->1 transition overflow case.
Fixes: edac4d8a16 ("target-arm: Add CNTVOFF_EL2")
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/60
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231120173506.3729884-1-peter.maydell@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
The syndrome register value always has an IL field at bit 25, which
is 0 for a trap on a 16 bit instruction, and 1 for a trap on a 32
bit instruction (or for exceptions which aren't traps on a known
instruction, like PC alignment faults). This means that our
syn_*() functions should always either take an is_16bit argument to
determine whether to set the IL bit, or else unconditionally set it.
We missed setting the IL bit for the syndrome for three kinds of trap:
* an SVE access exception
* a pointer authentication check failure
* a BTI (branch target identification) check failure
All of these traps are AArch64 only, and so the instruction causing
the trap is always 64 bit. This means we can unconditionally set
the IL bit in the syn_*() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231120150121.3458408-1-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
I noticed that Neoverse-V1 has FEAT_RNG enabled so let enable it also on
Neoverse-N2.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231114103443.1652308-1-marcin.juszkiewicz@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 179e9a3bac "target/arm: Define new TB flag for ATA0"
Fixes: 5d7b37b5f6 "target/arm: Implement the CPY* instructions"
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to the technical reference manual, the Cortex-A9
has a Perfomance Unit Monitor (PMU):
https://developer.arm.com/documentation/100511/0401/performance-monitoring-unit/about-the-performance-monitoring-unit
The Cortex-A8 does also.
We already already define the PMU registers when emulating the
Cortex-A8 and Cortex-A9, because we put them in v7_cp_reginfo[]
rather than guarding them behind ARM_FEATURE_PMU. So the only thing
that setting the feature bit changes is that the registers actually
do something.
Enable ARM_FEATURE_PMU for Cortex-A8 and Cortex-A9, to avoid
this anomaly.
(The A8 and A9 PMU predates the standardisation of ID_DFR0.PerfMon,
so the field there is 0, but the PMU is still present.)
Signed-off-by: Nikita Ostrenkov <n.ostrenkov@gmail.com>
Message-id: 20231112165658.2335-1-n.ostrenkov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message; also enable PMU for A8]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we are doing a FEAT_MOPS copy that must be performed backwards,
we call mte_mops_probe_rev(), passing it the address of the last byte
in the region we are probing. However, allocation_tag_mem_probe()
wants the address of the first byte to get the tag memory for.
Because we passed it (ptr, size) we could incorrectly trip the
allocation_tag_mem_probe() check for "does this access run across to
the following page", and if that following page happened not to be
valid then we would assert.
We know we will always be only dealing with a single page because the
code that calls mte_mops_probe_rev() ensures that. We could make
mte_mops_probe_rev() pass 'ptr - (size - 1)' to
allocation_tag_mem_probe(), but then we would have to adjust the
returned 'mem' pointer to get back to the tag RAM for the last byte
of the region. It's simpler to just pass in a size of 1 byte,
because we know that allocation_tag_mem_probe() in pure-probe
single-page mode doesn't care about the size.
Fixes: 69c51dc372 ("target/arm: Implement MTE tag-checking functions for FEAT_MOPS copies")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231110162546.2192512-1-peter.maydell@linaro.org
AArch64 permits code at EL3 to use the HVC instruction; however the
exception we take should go to EL3, not down to EL2 (see the pseudocode
AArch64.CallHypervisor()). Fix the target EL.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20231109151917.1925107-1-peter.maydell@linaro.org
This is just a constant alias register with the same value as the
"other" MIDR so it serves no purpose being presented to gdbstub.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20231106185112.2755262-6-alex.bennee@linaro.org>
This avoids two duplicates being presented to gdbstub. As the
registers are RAZ anyway it is unlikely their value would be of use to
someone using gdbstub anyway.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-5-alex.bennee@linaro.org>
We also mark it ARM_CP_NO_GDB so we avoid duplicate PAR's in the
system register XML we send to gdb.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231107105145.2916124-1-alex.bennee@linaro.org>
Let CPUClass::class_by_name() handlers to return abstract classes,
and filter them once in the public cpu_class_by_name() method.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230908112235.75914-3-philmd@linaro.org>
The OBJECT_DECLARE_CPU_TYPE() macro forward-declares each
ArchCPUClass type. These forward declarations are sufficient
for code in hw/ to use the QOM definitions. No need to expose
these structure definitions. Keep each local to their target/
by moving them to the corresponding "cpu.h" header.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231013140116.255-13-philmd@linaro.org>
These definitions and declarations are only used by
target/arm/, no need to expose them to generic hw/.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231013140116.255-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <c48c9829-3dfa-79cf-3042-454fda0d00dc@linaro.org>
"target/foo/cpu-qom.h" is supposed to be target agnostic
(include-able by any target). Add such mention in the
header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231013140116.255-3-philmd@linaro.org>
Enforce the style described by commit 067109a11c ("docs/devel:
mention the spacing requirement for QOM"):
The first declaration of a storage or class structure should
always be the parent and leave a visual space between that
declaration and the new code. It is also useful to separate
backing for properties (options driven by the user) and internal
state to make navigation easier.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231013140116.255-2-philmd@linaro.org>
In commit be23a049 in the conversion to decodetree we broke the
decoding of the immediate value in the LDRA instruction. This should
be a 10 bit signed value that is scaled by 8, but in the conversion
we incorrectly ended up scaling it only by 2. Fix the scaling
factor.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1970
Fixes: be23a049 ("target/arm: Convert load (pointer auth) insns to decodetree")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231106113445.1163063-1-peter.maydell@linaro.org
In a two-stage translation, the result of the BTI guarded bit should
be the guarded bit from the first stage of translation, as there is
no BTI guard information in stage two. Our code tried to do this,
but got it wrong, because we currently have two fields where the GP
bit information might live (ARMCacheAttrs::guarded and
CPUTLBEntryFull::extra::arm::guarded), and we were storing the GP bit
in the latter during the stage 1 walk but trying to copy the former
in combine_cacheattrs().
Remove the duplicated storage, and always use the field in
CPUTLBEntryFull; correctly propagate the stage 1 value to the output
in get_phys_addr_twostage().
Note for stable backports: in v8.0 and earlier the field is named
result->f.guarded, not result->f.extra.arm.guarded.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1950
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231031173723.26582-1-peter.maydell@linaro.org
The previous change missed updating one of the increments and
one of the MemOps. Add a test case for all vector lengths.
Cc: qemu-stable@nongnu.org
Fixes: e6dd5e782b ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231031143215.29764-1-richard.henderson@linaro.org
[PMM: fixed checkpatch nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the registers used by the FEAT_MOPS instructions cannot use
31 as a register field value; this is CONSTRAINED UNPREDICTABLE to
NOP or UNDEF (we UNDEF). However, it is permitted for the "source
value" register for the memset insns SET* to be 31, which (as usual
for most data-processing insns) means it should be the zero register
XZR. We forgot to handle this case, with the effect that trying to
set memory to zero with a "SET* Xd, Xn, XZR" sets the memory to
the value that happens to be in the low byte of SP.
Handle XZR when getting the SET* data value from the register file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030174000.3792225-4-peter.maydell@linaro.org
In user-mode emulation, we need to set the SCTLR_EL1.MSCEn
bit to avoid all the FEAT_MOPS insns UNDEFing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231030174000.3792225-2-peter.maydell@linaro.org
Specifically DIT, LSE2, and MTE3.
We already expose detection of these via the CPUID interface, but
missed these from ELF hwcaps.
Signed-off-by: Marielle Novastrider <marielle@novastrider.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231029210058.38986-1-marielle@novastrider.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed conflict with feature tests moving to cpu-features.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 442c9d682c when we converted the ERET, ERETAA, ERETAB
instructions to decodetree, the conversion accidentally lost the
correct setting of the syndrome register when taking a trap because
of the FEAT_FGT HFGITR_EL1.ERET bit. Instead of reporting a correct
full syndrome value with the EC and IL bits, we only reported the low
two bits of the syndrome, because the call to syn_erettrap() got
dropped.
Fix the syndrome values for these traps by reinstating the
syn_erettrap() calls.
Fixes: 442c9d682c ("target/arm: Convert ERET, ERETAA, ERETAB to decodetree")
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024172438.2990945-1-peter.maydell@linaro.org
Move all the ID_AA64DFR* feature test functions together.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-7-peter.maydell@linaro.org
Move all the ID_AA64PFR* feature test functions together.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-6-peter.maydell@linaro.org
Move the feature test functions that test ID_AA64ISAR* fields
together.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-5-peter.maydell@linaro.org
Move the ID_AA64MMFR0 feature test functions up so they are
before the ones for ID_AA64MMFR1 and ID_AA64MMFR2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-4-peter.maydell@linaro.org
Our list of isar_feature functions is not in any particular order,
but tests on fields of the same ID register tend to be grouped
together. A few functions that are tests of fields in ID_AA64MMFR1
and ID_AA64MMFR2 are not in the same place as the rest; move them
into their groups.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-3-peter.maydell@linaro.org
The feature test functions isar_feature_*() now take up nearly
a thousand lines in target/arm/cpu.h. This header file is included
by a lot of source files, most of which don't need these functions.
Move the feature test functions to their own header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-2-peter.maydell@linaro.org
Implement a model of the Neoverse N2 CPU. This is an Armv9.0-A
processor very similar to the Cortex-A710. The differences are:
* no FEAT_EVT
* FEAT_DGH (data gathering hint)
* FEAT_NV (not yet implemented in QEMU)
* Statistical Profiling Extension (not implemented in QEMU)
* 48 bit physical address range, not 40
* CTR_EL0.DIC = 1 (no explicit icache cleaning needed)
* PMCR_EL0.N = 6 (always 6 PMU counters, not 20)
Because it has 48-bit physical address support, we can use
this CPU in the sbsa-ref board as well as the virt board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230915185453.1871167-3-peter.maydell@linaro.org
Correct a couple of minor errors in the Cortex-A710 definition:
* ID_AA64DFR0_EL1.DebugVer is 9 (indicating Armv8.4 debug architecture)
* ID_AA64ISAR1_EL1.APA is 5 (indicating more PAuth support)
* there is an IMPDEF CPUCFR_EL1, like that on the Neoverse-N1
Fixes: e3d45c0a89 ("target/arm: Implement cortex-a710")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230915185453.1871167-2-peter.maydell@linaro.org
The ext_and_shift_reg helper does this plus a shift.
The non-zero check for shift count is duplicate to
the one done within tcg_gen_shli_i64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The code for powering on a CPU in arm-powerctl.c has two separate
use cases:
* emulation of a real hardware power controller
* emulation of firmware interfaces (primarily PSCI) with
CPU on/off APIs
For the first case, we only need to reset the CPU and set its
starting PC and X0. For the second case, because we're emulating the
firmware we need to ensure that it's in the state that the firmware
provides. In particular, when we reset to a lower EL than the
highest one we are emulating, we need to put the CPU into a state
that permits correct running at that lower EL. We already do a
little of this in arm-powerctl.c (for instance we set SCR_HCE to
enable the HVC insn) but we don't do enough of it. This means that
in the case where we are emulating EL3 but also providing emulated
PSCI the guest will crash when a secondary core tries to use a
feature that needs an SCR_EL3 bit to be set, such as MTE or PAuth.
The hw/arm/boot.c code also has to support this "start guest code in
an EL that's lower than the highest emulated EL" case in order to do
direct guest kernel booting; it has all the necessary initialization
code to set the SCR_EL3 bits. Pull the relevant boot.c code out into
a separate function so we can share it between there and
arm-powerctl.c.
This refactoring has a few code changes that look like they
might be behaviour changes but aren't:
* if info->secure_boot is false and info->secure_board_setup is
true, then the old code would start the first CPU in Hyp
mode but without changing SCR.NS and NSACR.{CP11,CP10}.
This was wrong behaviour because there's no such thing
as Secure Hyp mode. The new code will leave the CPU in SVC.
(There is no board which sets secure_boot to false and
secure_board_setup to true, so this isn't a behaviour
change for any of our boards.)
* we don't explicitly clear SCR.NS when arm-powerctl.c
does a CPU-on to EL3. This was a no-op because CPU reset
will reset to NS == 0.
And some real behaviour changes:
* we no longer set HCR_EL2.RW when booting into EL2: the guest
can and should do that themselves before dropping into their
EL1 code. (arm-powerctl and boot did this differently; I
opted to use the logic from arm-powerctl, which only sets
HCR_EL2.RW when it's directly starting the guest in EL1,
because it's more correct, and I don't expect guests to be
accidentally depending on our having set the RW bit for them.)
* if we are booting a CPU into AArch32 Secure SVC then we won't
set SCR.HCE any more. This affects only the vexpress-a15 and
raspi2b machine types. Guests booting in this case will either:
- be able to set SCR.HCE themselves as part of moving from
Secure SVC into NS Hyp mode
- will move from Secure SVC to NS SVC, and won't care about
behaviour of the HVC insn
- will stay in Secure SVC, and won't care about HVC
* on an arm-powerctl CPU-on we will now set the SCR bits for
pauth/mte/sve/sme/hcx/fgt features
The first two of these are very minor and I don't expect guest
code to trip over them, so I didn't judge it worth convoluting
the code in an attempt to keep exactly the same boot.c behaviour.
The third change fixes issue 1899.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1899
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230926155619.4028618-1-peter.maydell@linaro.org
The hw/arm/boot.h include in common-semi-target.h is not actually
needed, and it's a bit odd because it pulls a hw/arm header into a
target/arm file.
This include was originally needed because the semihosting code used
the arm_boot_info struct to get the base address of the RAM in system
emulation, to use in a (bad) heuristic for the return values for the
SYS_HEAPINFO semihosting call. We've since overhauled how we
calculate the HEAPINFO values in system emulation, and the code no
longer uses the arm_boot_info struct.
Remove the now-redundant include line, and instead directly include
the cpu-qom.h header that we were previously getting via boot.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230925112219.3919261-1-peter.maydell@linaro.org
The include of hw/arm/virt.h in kvm64.c is unnecessary and also a
layering violation since the generic KVM code shouldn't need to know
anything about board-specifics. The include line is an accidental
leftover from commit 15613357ba, where we cleaned up the code
to not depend on virt board internals but forgot to also remove the
now-redundant include line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230925110429.3917202-1-peter.maydell@linaro.org
FEAT_HPMN0 is a small feature which defines that it is valid for
MDCR_EL2.HPMN to be set to 0, meaning "no PMU event counters provided
to an EL1 guest" (previously this setting was reserved). QEMU's
implementation almost gets HPMN == 0 right, but we need to fix
one check in pmevcntr_is_64_bit(). That is enough for us to
advertise the feature in the 'max' CPU.
(We don't need to make the behaviour conditional on feature
presence, because the FEAT_HPMN0 behaviour is within the range
of permitted UNPREDICTABLE behaviour for a non-FEAT_HPMN0
implementation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230921185445.3339214-1-peter.maydell@linaro.org
For the Thumb T32 encoding of LDM, if only a single register is
specified in the register list this instruction is UNPREDICTABLE,
with the following choices:
* instruction UNDEFs
* instruction is a NOP
* instruction loads a single register
* instruction loads an unspecified set of registers
Currently we choose to UNDEF (a behaviour chosen in commit
4b222545db in 2019; previously we treated it as "load the
specified single register").
Unfortunately there is real world code out there (which shipped in at
least Android 11, 12 and 13) which incorrectly uses this
UNPREDICTABLE insn on the assumption that it does a single register
load, which is (presumably) what it happens to do on real hardware,
and is also what it does on the equivalent A32 encoding.
Revert to the pre-4b222545dbf30 behaviour of not UNDEFing
for this T32 encoding.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1799
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230927101853.39288-1-peter.maydell@linaro.org
We can neaten the code by switching the callers that work on a
CPUstate to the kvm_get_one_reg function.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231010142453.224369-3-cohuck@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can neaten the code by switching to the kvm_set_one_reg function.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231010142453.224369-2-cohuck@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On an attempt to access CNTPCT_EL0 from EL0 using a guest running on top
of Xen, a trap from EL2 was observed which is something not reproducible
on HW (also, Xen does not trap accesses to physical counter).
This is because gt_counter_access() checks for an incorrect bit (1
instead of 0) of CNTHCTL_EL2 if HCR_EL2.E2H is 0 and access is made to
physical counter. Refer ARM ARM DDI 0487J.a, D19.12.2:
When HCR_EL2.E2H is 0:
- EL1PCTEN, bit [0]: refers to physical counter
- EL1PCEN, bit [1]: refers to physical timer registers
Drop entire block "if (hcr & HCR_E2H) {...} else {...}" from EL0 case
and fall through to EL1 case, given that after fixing checking for the
correct bit, the handling is the same.
Fixes: 5bc8437136 ("target/arm: Update timer access for VHE")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Message-id: 20230928094404.20802-1-michal.orzel@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
struct arm_boot_info is declared in "hw/arm/boot.h".
By including the correct header we don't need to declare
it again in "target/arm/cpu-qom.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231013130214.95742-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GDB has XML support since 6.7 which was released in 2007.
It's time to remove support for old GDB versions without XML support.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230912224107.29669-10-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-17-alex.bennee@linaro.org>
All implementations of gdb_arch_name() returns dynamic duplicates of
static strings. It's also unlikely that there will be an implementation
of gdb_arch_name() that returns a truly dynamic value due to the nature
of the function returning a well-known identifiers. Qualify the value
gdb_arch_name() with const and make all of its implementations return
static strings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230912224107.29669-8-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-15-alex.bennee@linaro.org>
Some subclasses overwrite gdb_core_xml_file member but others don't.
Always initialize the member in the subclasses for consistency.
This especially helps for AArch64; in a following change, the file
specified by gdb_core_xml_file is always looked up even if it's going to
be overwritten later. Looking up arm-core.xml results in an error as
it will not be embedded in the AArch64 build.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230912224107.29669-7-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-14-alex.bennee@linaro.org>
Finish the convertion started with commit de6cd7599b
("meson: Replace softmmu_ss -> system_ss"). If the
$target_type is 'system', then use the target_system_arch[]
source set :)
Mechanical change doing:
$ sed -i -e s/target_softmmu_arch/target_system_arch/g \
$(git grep -l target_softmmu_arch)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-13-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function is now empty, so remove it. In the case of
m68k and tricore, this empties the class instance initfn,
so remove those as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Retain the separate structure to emphasize its importance.
Enforce CPUArchState always follows CPUState without padding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Inherit the size and alignment from TYPE_ARM_CPU.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TARGET_PAGE_ENTRY_EXTRA is a macro that allows guests to specify additional
fields for caching with the full TLB entry. This macro is replaced with
a union in CPUTLBEntryFull, thus making CPUTLB target-agnostic at the
cost of slightly inflated CPUTLBEntryFull for non-arm guests.
Note, this is needed to ensure that fields in CPUTLB don't vary in
offset between various targets.
(arm is the only guest actually making use of this feature.)
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-2-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Per Peter Maydell analysis [*]:
The hvf_vcpu_exec() function is not documented, but in practice
its caller expects it to return either EXCP_DEBUG (for "this was
a guest debug exception you need to deal with") or something else
(presumably the intention being 0 for OK).
The hvf_sysreg_read() and hvf_sysreg_write() functions are also not
documented, but they return 0 on success, or 1 for a completely
unrecognized sysreg where we've raised the UNDEF exception (but
not if we raised an UNDEF exception for an unrecognized GIC sysreg --
I think this is a bug). We use this return value to decide whether
we need to advance the PC past the insn or not. It's not the same
as the return value we want to return from hvf_vcpu_exec().
Retain the variable as locally scoped but give it a name that
doesn't clash with the other function-scoped variable.
This fixes:
target/arm/hvf/hvf.c:1936:13: error: declaration shadows a local variable [-Werror,-Wshadow]
int ret = 0;
^
target/arm/hvf/hvf.c:1807:9: note: previous declaration is here
int ret;
^
[*] https://lore.kernel.org/qemu-devel/CAFEAcA_e+fU6JKtS+W63wr9cCJ6btu_hT_ydZWOwC0kBkDYYYQ@mail.gmail.com/
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-4-philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Enable FEAT_MOPS on the AArch64 'max' CPU, and add it to
the list of features we implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-13-peter.maydell@linaro.org
The FEAT_MOPS CPY* instructions implement memory copies. These
come in both "always forwards" (memcpy-style) and "overlap OK"
(memmove-style) flavours.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-12-peter.maydell@linaro.org
The FEAT_MOPS memory copy operations need an extra helper routine
for checking for MTE tag checking failures beyond the ones we
already added for memory set operations:
* mte_mops_probe_rev() does the same job as mte_mops_probe(), but
it checks tags starting at the provided address and working
backwards, rather than forwards
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-11-peter.maydell@linaro.org
The FEAT_MOPS SETG* instructions are very similar to the SET*
instructions, but as well as setting memory contents they also
set the MTE tags. They are architecturally required to operate
on tag-granule aligned regions only.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-10-peter.maydell@linaro.org
Currently the only tag-setting instructions always do so in the
context of the current EL, and so we only need one ATA bit in the TB
flags. The FEAT_MOPS SETG instructions include ones which set tags
for a non-privileged access, so we now also need the equivalent "are
tags enabled?" information for EL0.
Add the new TB flag, and convert the existing 'bool ata' field in
DisasContext to a 'bool ata[2]' that can be indexed by the is_unpriv
bit in an instruction, similarly to mte[2].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-9-peter.maydell@linaro.org
Implement the SET* instructions which collectively implement a
"memset" operation. These come in a set of three, eg SETP
(prologue), SETM (main), SETE (epilogue), and each of those has
different flavours to indicate whether memory accesses should be
unpriv or non-temporal.
This commit does not include the "memset with tag setting"
SETG* instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-8-peter.maydell@linaro.org
The FEAT_MOPS instructions need a couple of helper routines that
check for MTE tag failures:
* mte_mops_probe() checks whether there is going to be a tag
error in the next up-to-a-page worth of data
* mte_check_fail() is an existing function to record the fact
of a tag failure, which we need to make global so we can
call it from helper-a64.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-7-peter.maydell@linaro.org
For the FEAT_MOPS operations, the existing allocation_tag_mem()
function almost does what we want, but it will take a watchpoint
exception even for an ra == 0 probe request, and it requires that the
caller guarantee that the memory is accessible. For FEAT_MOPS we
want a function that will not take any kind of exception, and will
return NULL for the not-accessible case.
Rename allocation_tag_mem() to allocation_tag_mem_probe() and add an
extra 'probe' argument that lets us distinguish these cases;
allocation_tag_mem() is now a wrapper that always passes 'false'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-6-peter.maydell@linaro.org
The FEAT_MOPS memory operations can raise a Memory Copy or Memory Set
exception if a copy or set instruction is executed when the CPU
register state is not correct for that instruction. Define the
usual syn_* function that constructs the syndrome register value
for these exceptions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-5-peter.maydell@linaro.org
In every place that we call the get_a64_user_mem_index() function
we do it like this:
memidx = a->unpriv ? get_a64_user_mem_index(s) : get_mem_index(s);
Refactor so the caller passes in the bool that says whether they
want the 'unpriv' or 'normal' mem_index rather than having to
do the ?: themselves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230912140434.1333369-4-peter.maydell@linaro.org
FEAT_MOPS defines a handful of new enable bits:
* HCRX_EL2.MSCEn, SCTLR_EL1.MSCEn, SCTLR_EL2.MSCen:
define whether the new insns should UNDEF or not
* HCRX_EL2.MCE2: defines whether memops exceptions from
EL1 should be taken to EL1 or EL2
Since we don't sanitise what bits can be written for the SCTLR
registers, we only need to handle the new bits in HCRX_EL2, and
define SCTLR_MSCEN for the new SCTLR bit value.
The precedence of "HCRX bits acts as 0 if SCR_EL3.HXEn is 0" versus
"bit acts as 1 if EL2 disabled" is not clear from the register
definition text, but it is clear in the CheckMOPSEnabled()
pseudocode(), so we follow that. We'll have to check whether other
bits we need to implement in future follow the same logic or not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-3-peter.maydell@linaro.org
The LDRT/STRT "unprivileged load/store" instructions behave like
normal ones if executed at EL0. We handle this correctly for
the load/store semantics, but get the MTE checking wrong.
We always look at s->mte_active[is_unpriv] to see whether we should
be doing MTE checks, but in hflags.c when we set the TB flags that
will be used to fill the mte_active[] array we only set the
MTE0_ACTIVE bit if UNPRIV is true (i.e. we are not at EL0).
This means that a LDRT at EL0 will see s->mte_active[1] as 0,
and will not do MTE checks even when MTE is enabled.
To avoid the translate-time code having to do an explicit check on
s->unpriv to see if it is OK to index into the mte_active[] array,
duplicate MTE_ACTIVE into MTE0_ACTIVE when UNPRIV is false.
(This isn't a very serious bug because generally nobody executes
LDRT/STRT at EL0, because they have no use there.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-2-peter.maydell@linaro.org
The allocation_tag_mem() function takes an argument tag_size,
but it never uses it. Remove the argument. In mte_probe_int()
in particular this also lets us delete the code computing
the value we were passing in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
FEAT_HBC (Hinted conditional branches) provides a new instruction
BC.cond, which behaves exactly like the existing B.cond except
that it provides a hint to the branch predictor about the
likely behaviour of the branch.
Since QEMU does not implement branch prediction, we can treat
this identically to B.cond.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For user-only mode we reveal a subset of the AArch64 ID registers
to the guest, to emulate the kernel's trap-and-emulate-ID-regs
handling. Update the feature bit masks to match upstream kernel
commit a48fa7efaf1161c1c.
None of these features are yet implemented by QEMU, so this
doesn't yet have a behavioural change, but implementation of
FEAT_MOPS and FEAT_HBC is imminent.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update our AArch64 ID register field definitions from the 2023-06
system register XML release:
https://developer.arm.com/documentation/ddi0601/2023-06/
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230831030904.1194667-3-richard.henderson@linaro.org>
Use generic routine for 64-bit carry-less multiply.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use generic routines for 32-bit carry-less multiply.
Remove our local version of pmull_d.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use generic routines for 16-bit carry-less multiply.
Remove our local version of pmull_w.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use generic routines for 8-bit carry-less multiply.
Remove our local version of pmull_h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Remove 'host' CPU from TCG
* riscv_htif Fixup printing on big endian hosts
* Add zmmul isa string
* Add smepmp isa string
* Fix page_check_range use in fault-only-first
* Use existing lookup tables for MixColumns
* Add RISC-V vector cryptographic instruction set support
* Implement WARL behaviour for mcountinhibit/mcounteren
* Add Zihintntl extension ISA string to DTS
* Fix zfa fleq.d and fltq.d
* Fix upper/lower mtime write calculation
* Make rtc variable names consistent
* Use abi type for linux-user target_ucontext
* Add RISC-V KVM AIA Support
* Fix riscv,pmu DT node path in the virt machine
* Update CSR bits name for svadu extension
* Mark zicond non-experimental
* Fix satp_mode_finalize() when satp_mode.supported = 0
* Fix non-KVM --enable-debug build
* Add new extensions to hwprobe
* Use accelerated helper for AES64KS1I
* Allocate itrigger timers only once
* Respect mseccfg.RLB for pmpaddrX changes
* Align the AIA model to v1.0 ratified spec
* Don't read the CSR in riscv_csrrw_do64
-----BEGIN PGP SIGNATURE-----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=aqcx
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu into staging
First RISC-V PR for 8.2
* Remove 'host' CPU from TCG
* riscv_htif Fixup printing on big endian hosts
* Add zmmul isa string
* Add smepmp isa string
* Fix page_check_range use in fault-only-first
* Use existing lookup tables for MixColumns
* Add RISC-V vector cryptographic instruction set support
* Implement WARL behaviour for mcountinhibit/mcounteren
* Add Zihintntl extension ISA string to DTS
* Fix zfa fleq.d and fltq.d
* Fix upper/lower mtime write calculation
* Make rtc variable names consistent
* Use abi type for linux-user target_ucontext
* Add RISC-V KVM AIA Support
* Fix riscv,pmu DT node path in the virt machine
* Update CSR bits name for svadu extension
* Mark zicond non-experimental
* Fix satp_mode_finalize() when satp_mode.supported = 0
* Fix non-KVM --enable-debug build
* Add new extensions to hwprobe
* Use accelerated helper for AES64KS1I
* Allocate itrigger timers only once
* Respect mseccfg.RLB for pmpaddrX changes
* Align the AIA model to v1.0 ratified spec
* Don't read the CSR in riscv_csrrw_do64
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmT+ttMACgkQr3yVEwxT
# gBN/rg/+KhOvL9xWSNb8pzlIsMQHLvndno0Sq5b9Rb/o5z1ekyYfyg6712N3JJpA
# TIfZzOIW7oYZV8gHyaBtOt8kIbrjwzGB2rpCh4blhm+yNZv7Ym9Ko6AVVzoUDo7k
# 2dWkLnC+52/l3SXGeyYMJOlgUUsQMwjD6ykDEr42P6DfVord34fpTH7ftwSasO9K
# 35qJQqhUCgB3fMzjKTYICN6Rm1UluijTjRNXUZXC0XZlr+UKw2jT/UsybbWVXyNs
# SmkRtF1MEVGvw+b8XOgA/nG1qVCWglTMcPvKjWMY+cY9WLM6/R9nXAV8OL/JPead
# v1LvROJNukfjNtDW6AOl5/svOJTRLbIrV5EO7Hlm1E4kftGmE5C+AKZZ/VT4ucUK
# XgqaHoXh26tFEymVjzbtyFnUHNv0zLuGelTnmc5Ps1byLSe4lT0dBaJy6Zizg0LE
# DpTR7s3LpyV3qB96Xf9bOMaTPsekUjD3dQI/3X634r36+YovRXapJDEDacN9whbU
# BSZc20NoM5UxVXFTbELQXolue/X2BRLxpzB+BDG8/cpu/MPgcCNiOZaVrr/pOo33
# 6rwwrBhLSCfYAXnJ52qTUEBz0Z/FnRPza8AU/uuRYRFk6JhUXIonmO6xkzsoNKuN
# QNnih/v1J+1XqUyyT2InOoAiTotzHiWgKZKaMfAhomt2j/slz+A=
# =aqcx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Sep 2023 02:42:27 EDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu: (45 commits)
target/riscv: don't read CSR in riscv_csrrw_do64
target/riscv: Align the AIA model to v1.0 ratified spec
target/riscv/pmp.c: respect mseccfg.RLB for pmpaddrX changes
target/riscv: Allocate itrigger timers only once
target/riscv: Use accelerated helper for AES64KS1I
linux-user/riscv: Add new extensions to hwprobe
hw/intc/riscv_aplic.c fix non-KVM --enable-debug build
hw/riscv/virt.c: fix non-KVM --enable-debug build
riscv: zicond: make non-experimental
target/riscv: fix satp_mode_finalize() when satp_mode.supported = 0
target/riscv: Update CSR bits name for svadu extension
hw/riscv: virt: Fix riscv,pmu DT node path
target/riscv: select KVM AIA in riscv virt machine
target/riscv: update APLIC and IMSIC to support KVM AIA
target/riscv: Create an KVM AIA irqchip
target/riscv: check the in-kernel irqchip support
target/riscv: support the AIA device emulation with KVM enabled
linux-user/riscv: Use abi type for target_ucontext
hw/intc: Make rtc variable names consistent
hw/intc: Fix upper/lower mtime write calculation
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allows sharing of sm4_subword between different targets.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-14-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that we have Eager Page Split support added for ARM in the kernel,
enable it in Qemu. This adds,
-eager-split-size to -accel sub-options to set the eager page split chunk size.
-enable KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE.
The chunk size specifies how many pages to break at a time, using a
single allocation. Bigger the chunk size, more pages need to be
allocated ahead of time.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-id: 20230905091246.1931-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The linux kernel detects and enables this bit. Once trapped,
EC_SYSTEMREGISTERTRAP is treated like EC_UNCATEGORIZED, so
no changes required within linux-user/aarch64/cpu_loop.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the check for EL2 enabled in the security space and the
TIDCP bit in an out-of-line helper.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cortex-a710 is a first generation ARMv9.0-A processor.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a stub implementation, as a write is a "request".
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Due to recent KVM changes, QEMU is setting a ptimer offset resulting
in unintended trap and emulate access and a consequent performance
hit. Filter out the PTIMER_CNT register to restore trapless ptimer
access.
Quoting Andrew Jones:
Simply reading the CNT register and writing back the same value is
enough to set an offset, since the timer will have certainly moved
past whatever value was read by the time it's written. QEMU
frequently saves and restores all registers in the get-reg-list array,
unless they've been explicitly filtered out (with Linux commit
680232a94c12, KVM_REG_ARM_PTIMER_CNT is now in the array). So, to
restore trapless ptimer accesses, we need a QEMU patch to filter out
the register.
See
https://lore.kernel.org/kvmarm/gsntttsonus5.fsf@coltonlewis-kvm.c.googlers.com/T/#m0770023762a821db2a3f0dd0a7dc6aa54e0d0da9
for additional context.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Colton Lewis <coltonlewis@google.com>
Message-id: 20230831190052.129045-1-coltonlewis@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
