The availability of tb->pc will shortly be conditional.
Introduce accessor functions to minimize ifdefs.
Pass around a known pc to places like tcg_gen_code,
where the caller must already have the value.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When running SMP systems we sometimes were seeing lockups where
IPI interrupts were being raised by never handled.
This looks to be caused by 2 issues in the openrisc interrupt handling
logic.
1. After clearing an interrupt the openrisc_cpu_set_irq handler will
always clear PICSR. This is not correct as masked interrupts
should still be visible in PICSR.
2. After setting PICMR (mask register) and exposed interrupts should
cause an interrupt to be raised. This was not being done so add it.
This patch fixes both issues.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
This patch enables multithread TCG for OpenRISC. Since the or1k shared
syncrhonized timer can be updated from each vCPU via helpers we use a
mutex to synchronize updates.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
When we are tracing it's helpful to know which CPU's are getting
interrupted, add that detail to the log line.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
In commit f0655423ca ("target/openrisc: Reorg tlb lookup") data and
instruction TLB reads were combined. This, broke debugger reads where
we first tried to map using the data tlb then fall back to the
instruction tlb.
This patch replicates this logic by first requesting a PAGE_READ
protection mapping then falling back to PAGE_EXEC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
- A few or1ksim fixes and enhancements
- A fix for OpenRISC tcg backend around delay slot handling
-----BEGIN PGP SIGNATURE-----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=tmP4
-----END PGP SIGNATURE-----
Merge tag 'or1k-pull-request-20220515' of https://github.com/stffrdhrn/qemu into staging
OpenRISC Fixes for 7.0
- A few or1ksim fixes and enhancements
- A fix for OpenRISC tcg backend around delay slot handling
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmKAWKsACgkQw7McLV5m
# J+SoFg/8Dlrc2BqjjXw9gpaQ18+3BRI6dMVPqHA22VJks88gykH7UWLUbrCxtKnS
# SBcIcpzu17nKDdfwYWndqCr0UBM/zM3JzFrTv4QEhTEg6Np7lSM2KVNEhjBPVGoW
# A7QOjPFrwItWOfAx6hrcczpj+L50iKuWeMW0XnEfqSeDYisxZcSp2yMoe5h3y7bF
# tlpo+ha/ir/fd2kMlFrQlPWYiWkWM05RLJJOlXhdRMF7hrW5qlHqEB/SVykUTf7V
# 6fqOFvY6r3vE5OFm0Scgf/k2AJIxwV8qXkBJ5/egv+ZqUidZBQ9nXtOw++vF2AWp
# eKoU2/c2XIxiF1Xdpgdi6a/CxlLqrr9jraQROB3GpaL9zGQvd//wUCg0F+QLicLv
# avq4lvNmnat89aXj1DQ+DWpLy0zaZFGmxsPR+KeBJ2wkuEJ3Vd4+uiuAyXnm9M8D
# wEE8mgFQYsTL1WlgHF4uNTDIx8OLS+4gYlBE3tffRksxyLLwzKHHgAfLdNZvhfx8
# QZBuPy+yyO8zjr3RUVUArBs/ukZHP1QwDE6uxmPKV34tvVEbFVeSFY3a1LmYV3w5
# mZNALNqf+h5Dq5Qo7f7cGNMrzhL53GTWPNX0MK5+SBDZF3/fpPZyvCr4Zd69Z5tD
# +YClfWBv8HPjdUf+IFHqyE8rURw/sgNvgB76GpalwcUYXRr7zTM=
# =tmP4
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 14 May 2022 06:34:35 PM PDT
# gpg: using RSA key D9C47354AEF86C103A25EFF1C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* tag 'or1k-pull-request-20220515' of https://github.com/stffrdhrn/qemu:
target/openrisc: Do not reset delay slot flag on early tb exit
hw/openrisc: use right OMPIC size variable
hw/openrisc: support 4 serial ports in or1ksim
hw/openrisc: page-align FDT address
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This was found when running linux crypto algorithm selftests used by
wireguard. We found that randomly the tests would fail. We found
through investigation that a combination of a tick timer interrupt,
raised when executing a delay slot instruction at a page boundary caused
the issue.
This was caused when handling the TB_EXIT_REQUESTED case in cpu_tb_exec.
On OpenRISC, which doesn't implement synchronize_from_tb, set_pc was
being used as a fallback. The OpenRISC set_pc implementation clears
dflag, which caused the exception handling logic to not account for the
delay slot. This was the bug, because it meant when execution resumed
after the interrupt was handling it resumed in the wrong place.
Fix this by implementing synchronize_from_tb which simply updates pc,
and not clear the delay slot flag.
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)
We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.
Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
It missed vmstate_ppc_cpu.
The fallback code in cpu_loop_exit_sigsegv is sufficient for
openrisc linux-user.
This makes all of the code in mmu.c sysemu only, so remove
the ifdefs and move the file to openrisc_softmmu_ss.
Remove the code from cpu_loop that handled EXCP_DPF.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing target specific about this. The implementation
is host specific, but the declaration is 100% common.
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-17-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hook is now unused, with breakpoints checked outside translation.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We still need the t0 temporary for computing overflow,
but we do not need to initialize it to zero first.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are virtually certain to have fetched constant 0 once, at the
beginning of the TB, so we might as well use it elsewhere.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The temp allocated for tcg_const_tl is auto-freed at branches,
but pure constants are not. So we can remove the extra hoop
jumping in trans_l_swa.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace uses of tcg_const_* allocate and free close together
with tcg_constant_*.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reorder the control statements to allow using the page boundary
check from translator_use_goto_tb().
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The root trace-events only declares a single TCG event:
$ git grep -w tcg trace-events
trace-events:115:# tcg/tcg-op.c
trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
and only a tcg/tcg-op.c uses it:
$ git grep -l trace_guest_mem_before_tcg
tcg/tcg-op.c
therefore it is pointless to include "trace-tcg.h" in each target
(because it is not used). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210629050935.2570721-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We no longer have any runtime modifications to this struct,
so declare them all const.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-21-f4bug@amsat.org>
[rth: Drop declaration movement from target/*/cpu.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a structure to hold handler specific to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-15-f4bug@amsat.org>
[rth: Squash "restrict hw/core/sysemu-cpu-ops.h" patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch adds icount handling to mfspr/mtspr instructions
that may deal with hardware timers.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Message-Id: <161700376169.1135890.8707223959310729949.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stafford Horne <shorne@gmail.com>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG-specific CPU methods will be moved to a separate struct,
to make it easier to move accel-specific code outside generic CPU
code in the future. Start by moving tcg_initialize().
The new CPUClass.tcg_opts field may eventually become a pointer,
but keep it an embedded struct for now, to make code conversion
easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: move TCGCpuOperations inside include/hw/core/cpu.h]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().
The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The openrisc code uses an old style of interrupt handling, where a
separate standalone set of qemu_irqs invoke a function
openrisc_pic_cpu_handler() which signals the interrupt to the CPU
proper by directly calling cpu_interrupt() and cpu_reset_interrupt().
Because CPU objects now inherit (indirectly) from TYPE_DEVICE, they
can have GPIO input lines themselves, and the neater modern way to
implement this is to simply have the CPU object itself provide the
input IRQ lines.
Create GPIO inputs to the OpenRISC CPU object, and make the only user
of cpu_openrisc_pic_init() wire up directly to those instead.
This allows us to delete the hw/openrisc/pic_cpu.c file entirely.
This fixes a trivial memory leak reported by Coverity of the IRQs
allocated in cpu_openrisc_pic_init().
Fixes: Coverity CID 1421934
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Message-id: 20201127225127.14770-4-peter.maydell@linaro.org
In the mtspr helper we attempt to check for "is the timer disabled"
with "if (env->ttmr & TIMER_NONE)". This is wrong because TIMER_NONE
is zero and the condition is always false (Coverity complains about
the dead code.)
The correct check would be to test whether the TTMR_M field in the
register is equal to TIMER_NONE instead. However, the
cpu_openrisc_timer_update() function checks whether the timer is
enabled (it looks at cpu->env.is_counting, which is set to 0 via
cpu_openrisc_count_stop() when the TTMR_M field is set to
TIMER_NONE), so there's no need to check for "timer disabled" in the
target/openrisc code. Instead, simply remove the dead code.
Fixes: Coverity CID 1005812
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Message-id: 20201103114654.18540-1-peter.maydell@linaro.org
One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.
Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.
Coccinelle patch used to convert all users of the macros:
@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);
@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>