Commit Graph

63374 Commits

Author SHA1 Message Date
Emilio G. Cota
23311b8182 test-rcu-list: access goflag with atomics
Instead of declaring it volatile.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-6-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
945d9c7530 rcu_queue: add RCU QTAILQ
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-5-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
13d8ef7dda rcu_queue: add RCU QSIMPLEQ
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-4-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
735d1af662 rcu_queue: remove barrier from QLIST_EMPTY_RCU
It's unnecessary because the pointer isn't dereferenced.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-3-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
c177e0bf06 rcu_queue: use atomic_set in QLIST_REMOVE_RCU
To avoid undefined behaviour.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-2-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Andrew Oates
db7196db5d target-i386: fix segment limit check in ljmp
The current implementation has three bugs,
 * segment limits are not enforced in protected mode if the L bit is set
   in the target segment descriptor
 * segment limits are not enforced in compatibility mode (ljmp to 32-bit
   code segment in long mode)
 * #GP(new_cs) is generated rather than #GP(0)

Now the segment limits are enforced if we're not in long mode OR the
target code segment doesn't have the L bit set.

Signed-off-by: Andrew Oates <aoates@google.com>
Message-Id: <20180816011903.39816-1-andrew@andrewoates.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Andrew Oates
0aca060526 target-i386: Fix lcall/ljmp to call gate in IA-32e mode
Currently call gates are always treated as 32-bit gates.  In IA-32e mode
(either compatibility or 64-bit submode), system segment descriptors are
always 64-bit.  Treating them as 32-bit has the expected unfortunate
effect: only the lower 32 bits of the offset are loaded, the stack
pointer is truncated, a bad new stack pointer is loaded from the TSS (if
switching privilege levels), etc.

This change adds support for 64-bit call gate to the lcall and ljmp
instructions.  Additionally, there should be a check for non-canonical
stack pointers, but I've omitted that since there doesn't seem to be
checks for non-canonical addresses in this code elsewhere.

I've left the raise_exception_err_ra lines unwapped at 80 columns to
match the style in the rest of the file.

Signed-off-by: Andrew Oates <aoates@google.com>
Message-Id: <20180819181725.34098-1-andrew@andrewoates.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Marc-André Lureau
692fbdf9f4 build-sys: remove glib_subprocess check
The check should be unnecessary since commit
e7b3af8159 "glib: bump min required glib
library version to 2.40".

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180730153639.26466-1-marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Prasad Singamsetty
1fdd474871 kvm: add call to qemu_add_opts() for -overcommit option
qemu command fails to process -overcommit option. Add the missing
call to qemu_add_opts() in vl.c.

Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
Message-Id: <20180815175704.105902-1-prasad.singamsetty@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
George Kennedy
966a09fac1 lsi_scsi: add support for PPR Extended Message
The LSI 53c895a code does not handle the PPR Extended Message. Add
support to handle PPR Extended Message like SDTR and WDTR are handled.
That is, to skip past the message bytes and ignore the message.

Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Eduardo Habkost
e38bf61247 i386: Fix arch_query_cpu_model_expansion() leak
Reported by Coverity:

Error: RESOURCE_LEAK (CWE-772): [#def439]
qemu-2.12.0/target/i386/cpu.c:3179: alloc_fn: Storage is returned from allocation function "qdict_new".
qemu-2.12.0/qobject/qdict.c:34:5: alloc_fn: Storage is returned from allocation function "g_malloc0".
qemu-2.12.0/qobject/qdict.c:34:5: var_assign: Assigning: "qdict" = "g_malloc0(4120UL)".
qemu-2.12.0/qobject/qdict.c:37:5: return_alloc: Returning allocated memory "qdict".
qemu-2.12.0/target/i386/cpu.c:3179: var_assign: Assigning: "props" = storage returned from "qdict_new()".
qemu-2.12.0/target/i386/cpu.c:3217: leaked_storage: Variable "props" going out of scope leaks the storage it points to.

This was introduced by commit b8097deb35 ("i386: Improve
query-cpu-model-expansion full mode").

The leak is only theoretical: if ret->model->props is set to
props, the qapi_free_CpuModelExpansionInfo() call will free props
too in case of errors.  The only way for this to not happen is if
we enter the default branch of the switch statement, which would
never happen because all CpuModelExpansionType values are being
handled.

It's still worth to change this to make the allocation logic
easier to follow and make the Coverity error go away.  To make
everything simpler, initialize ret->model and ret->model->props
earlier in the function.

While at it, remove redundant check for !prop because prop is
always initialized at the beginning of the function.

Fixes: b8097deb35
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180816183509.8231-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Marc-André Lureau
5be5df720e fw_cfg: import & use linux/qemu_fw_cfg.h
Use kernel common header for fw_cfg.

(unfortunately, optionrom.h must have its own define, since it's
actually an assembler header)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180817155910.5722-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-08-23 18:46:25 +02:00
Marc-André Lureau
039d7c4d53 update-linux-headers.sh: add qemu_fw_cfg.h
The fw_cfg header was added during 4.17 cycle.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180817155910.5722-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-08-23 18:46:25 +02:00
Heinrich Schuchardt
66e9d20ee0 checkpatch: allow space in more places before a bracket
Allow a space between a colon and subsequent opening bracket.  This
sequence may occur in inline assembler statements like

	asm(
		"ldr %[out], [%[in]]\n\t"
		: [out] "=r" (ret)
		: [in] "r" (addr)
	);

Allow a space between a comma and subsequent opening bracket.  This
sequence may occur in designated initializers.

To ease backporting the patch, I am also changing the comma-bracket
detection (added in QEMU by commit 409db6eb71)
to use the same regex as brackets and colons (as done independently
by Linux commit daebc534ac15f991961a5bb433e515988220e9bf).

Link: http://lkml.kernel.org/r/20180403191655.23700-1-xypron.glpk@gmx.de
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
97bfafe28a hmp-commands-info: add sync-profile
The command introduced here is just for developers. This means that:

- the info displayed and the output format could change in the future
- the command is only meant to be used from HMP, not from QMP

Sample output:

(qemu) sync-profile
sync-profile is off
(qemu) info sync-profile
Type               Object  Call site  Wait Time (s)         Count  Average (us)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(qemu) sync-profile on
(qemu) sync-profile
sync-profile is on
(qemu) info sync-profile 15
Type               Object  Call site                 Wait Time (s)         Count  Average (us)
----------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                    91.38235          2842      32154.24
BQL mutex  0x55a0171b7140  cpus.c:1434                    12.56490          5787       2171.23
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:432        7.75846          2844       2728.01
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870          5.09889          2884       1767.99
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:529        3.46140          3254       1063.74
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:804          0.76333          8655         88.20
BQL mutex  0x55a0171b7140  cpus.c:1466                     0.60893          2941        207.05
BQL mutex  0x55a0171b7140  util/main-loop.c:236            0.00894          6425          1.39
mutex      [           3]  util/qemu-timer.c:520           0.00342         50611          0.07
mutex      [           2]  util/qemu-timer.c:426           0.00254         31336          0.08
mutex      [           3]  util/qemu-timer.c:234           0.00107         19275          0.06
mutex      0x55a0171d9960  vl.c:763                        0.00043          6425          0.07
mutex      0x55a0180d1bb0  monitor.c:458                   0.00015          1603          0.09
mutex      0x55a0180e4c78  chardev/char.c:109              0.00002           217          0.08
mutex      0x55a0180d1bb0  monitor.c:448                   0.00001           162          0.08
----------------------------------------------------------------------------------------------
(qemu) info sync-profile -m 15
Type               Object  Call site                 Wait Time (s)         Count  Average (us)
----------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                    95.11196          3051      31174.03
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:432        7.92108          3052       2595.37
BQL mutex  0x55a0171b7140  cpus.c:1434                    13.38253          6210       2155.00
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870          5.09901          3093       1648.57
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:529        4.21123          3468       1214.31
BQL mutex  0x55a0171b7140  cpus.c:1466                     0.60895          3156        192.95
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:804          0.76337          9282         82.24
BQL mutex  0x55a0171b7140  util/main-loop.c:236            0.00944          6889          1.37
mutex      0x55a01813ce80  tcg/tcg.c:397                   0.00000            24          0.15
mutex      0x55a0180d1bb0  monitor.c:458                   0.00018          1922          0.09
mutex      [           2]  util/qemu-timer.c:426           0.00266         32710          0.08
mutex      0x55a0180e4c78  chardev/char.c:109              0.00002           260          0.08
mutex      0x55a0180d1bb0  monitor.c:448                   0.00001           187          0.08
mutex      0x55a0171d9960  vl.c:763                        0.00047          6889          0.07
mutex      [           3]  util/qemu-timer.c:520           0.00362         53377          0.07
----------------------------------------------------------------------------------------------
(qemu) info sync-profile -m -n 15
Type               Object  Call site                 Wait Time (s)         Count  Average (us)
----------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                   101.39331          3398      29839.12
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:432        7.92112          3399       2330.43
BQL mutex  0x55a0171b7140  cpus.c:1434                    14.28280          6922       2063.39
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870          5.77505          3445       1676.36
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:529        5.66139          3883       1457.99
BQL mutex  0x55a0171b7140  cpus.c:1466                     0.60901          3519        173.06
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:804          0.76351         10338         73.85
BQL mutex  0x55a0171b7140  util/main-loop.c:236            0.01032          7664          1.35
mutex      0x55a0180e4f08  util/qemu-timer.c:426           0.00041           901          0.45
mutex      0x55a01813ce80  tcg/tcg.c:397                   0.00000            24          0.15
mutex      0x55a0180d1bb0  monitor.c:458                   0.00022          2319          0.09
mutex      0x55a0180e4c78  chardev/char.c:109              0.00003           306          0.08
mutex      0x55a0180e4f08  util/qemu-timer.c:520           0.00068          8565          0.08
mutex      0x55a0180d1bb0  monitor.c:448                   0.00002           215          0.08
mutex      0x55a0180e4f78  util/qemu-timer.c:426           0.00247         34224          0.07
----------------------------------------------------------------------------------------------
(qemu) sync-profile reset
(qemu) info sync-profile -m 2
Type               Object  Call site               Wait Time (s)         Count  Average (us)
--------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                   2.78756            99      28157.12
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870        0.33054           102       3240.55
--------------------------------------------------------------------------------------------
(qemu) sync-profile off
(qemu) sync-profile
sync-profile is off
(qemu) sync-profile reset
(qemu) info sync-profile
Type               Object  Call site  Wait Time (s)         Count  Average (us)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
dd12e1bbf2 hmp-commands: add sync-profile
The command introduced here is just for developers. This means that:

- the interface implemented here could change in the future
- the command is only meant to be used from HMP, not from QMP

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
12df189de1 vl: add -enable-sync-profile
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
9d5cff3df5 tests/atomic_add-bench: add -p to enable sync profiler
When used together with -m, this allows us to benchmark the
profiler's performance impact on qemu_mutex_lock.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
cb764d0665 qsp: track BQL callers explicitly
The BQL is acquired via qemu_mutex_lock_iothread(), which makes
the profiler assign the associated wait time (i.e. most of
BQL wait time) entirely to that function. This loses the original
call site information, which does not help diagnose BQL contention.
Fix it by tracking the callers explicitly.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
d557de4a0e qsp: support call site coalescing
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
996e8d9a45 qsp: add qsp_reset
I first implemented this by deleting all entries in the global
hash table. But doing that safely slows down profiling, since
we'd need to introduce rcu_read_lock/unlock in the fast path.

What's implemented here avoids messing with the thread-local
data in the global hash table. It achieves this by taking a snapshot
of the current state, so that subsequent reports present the delta
wrt to the snapshot.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
0a22777c71 qsp: add sort_by option to qsp_report
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
fe9959a275 qsp: QEMU's Synchronization Profiler
The goal of this module is to profile synchronization primitives (i.e.
mutexes, recursive mutexes and condition variables) so that scalability
issues can be quickly diagnosed.

Sync primitives are profiled by QSP based on the vaddr of the object accessed
as well as the call site (file:line_nr). That means the same object called
from two different call sites will be tracked in separate entries, which
might be reported together or separately (see subsequent commit on
call site coalescing).

Some perf numbers:

Host: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz
Command: taskset -c 0 tests/atomic_add-bench -d 5 -m

- Before: 54.80 Mops/s
- After:  54.75 Mops/s

That is, a negligible slowdown due to the now indirect call to
qemu_mutex_lock. Note that using a branch instead of an indirect
call introduces a more severe slowdown (53.65 Mops/s, i.e. 2% slowdown).

Enabling the profiler (with -p, added in this series) is more interesting:

- No profiling: 54.75 Mops/s
- W/ profiling: 12.53 Mops/s

That is, a 4.36X slowdown.

We can break down this slowdown by removing the get_clock calls or
the entry lookup:

- No profiling:     54.75 Mops/s
- W/o get_clock:    25.37 Mops/s
- W/o entry lookup: 19.30 Mops/s
- W/ profiling:     12.53 Mops/s

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota
c04649eeea seqlock: constify seqlock_read_begin
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Thomas Huth
410573aa2c tests/device-introspect: Test with all machines, not only with "none"
Certain device introspection crashes used to only happen if you were
using a certain machine, e.g. if the machine was using serial_hd() or
nd_table[], and a device was trying to use these in its instance_init
function, too.

To be able to catch these problems, let's extend the device-introspect
test to check the devices on all machine types, with and without the
"-nodefaults" parameter (since this makes a difference sometimes, too).
Since this is a rather slow operation, and most of the problems are
already handled by testing with the "none" machine only, the test with
all machines is only run in the "make check SPEED=slow" mode.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-8-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Thomas Huth
d068521264 tests/device-introspection: Check that the qom-tree and qtree do not change
Introspection should not change the qom-tree / qtree, so we should check
this in the device-introspect-test, too. This patch helped to find lots
of instrospection bugs during the QEMU v3.0 soft/hard-freeze period in the
last two months.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-7-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Thomas Huth
1f4a0d81af tests: Skip old versioned machine types in quick testing mode
The tests that check something for all machine types currently spend
a lot of time checking old machine types (like "pc-i440fx-2.0" for
example). The chances that we find something new there in addition
to checking the latest version of a machine type are pretty low, so
we should not waste the time of the developers by testing this again
and again in the "quick" testing mode.
Thus let's add some code to determine whether we are testing a current
machine type or an old one, and only test the old types if we are
running in "SPEED=slow" mode.
This decreases the testing time quite a bit now, e.g. the qom-test
now finishes within 4 seconds for qemu-system-x86_64 instead of 30
seconds when testing all machines.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-6-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:23 +02:00
Thomas Huth
29551fdcf4 hw/timer/mc146818rtc: Fix introspection problem
There is currently a funny problem with the "mc146818rtc" device:
1) Start QEMU like this:
   qemu-system-ppc64 -M pseries -S
2) At the HMP monitor, enter "info qom-tree". Note that there is an
   entry for "/rtc (spapr-rtc)".
3) Introspect the mc146818rtc device like this:
   device_add mc146818rtc,help
4) Run "info qom-tree" again. The "/rtc" entry is gone now!

The rtc_finalize() function of the mc146818rtc device has two bugs: First,
it tries to remove a "rtc" property, while the rtc_realizefn() added a
"rtc-time" property instead. And second, it should have been done in an
unrealize function, not in a finalize function, to avoid that this causes
problems during introspection.

But since adding aliases to the global machine state should not be done
from a device's realize function anyway, let's rather fix this issue
by moving the creation of the alias to the code that creates the device
(and thus is run from the machine init functions instead), i.e. the
mc146818_rtc_init() function for most machines. The prep machines are
special, since the mc146818rtc device is created here in the realize
function of the i82378 device. Since we certainly don't want to add the
alias there, we add it to some code that is called from the ibm_40p_init()
machine init function instead.
Since the alias is now only created during the machine init, we can remove
the object_property_del() completely.

Fixes: 654a36d857
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-5-git-send-email-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Thomas Huth
7cd9681b8e hw/timer/mc146818rtc: White space clean-up
mc146818rtc.c still contains some TABs. Replace them with spaces.
And while we're at it, also delete trailing whitespace in this file.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-4-git-send-email-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Thomas Huth
a3ab1dc072 net: Silence 'has no peer' messages in testing mode
When running qtests with -nodefaults, we are not interested in
these 'XYZ has no peer' messages.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-3-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Thomas Huth
880b169a45 tests/migration-test: Silence the kvm_hv message by default
When running "make check" on a non-POWER host, the output is quite
distorted like this:

  [...]
  GTESTER check-qtest-nios2
  GTESTER check-qtest-or1k
  GTESTER check-qtest-ppc64
Skipping test: kvm_hv not available Skipping test: kvm_hv not available Skipping test: kvm_hv not available Skipping test: kvm_hv not available   GTESTER check-qtest-ppcemb
  GTESTER check-qtest-ppc
  GTESTER check-qtest-riscv32
  GTESTER check-qtest-riscv64
  [...]

Move the check to the beginning of the main function instead, so that
we do not have to test the condition again and again for each test,
and better use g_test_message() instead of g_print() here, like it is
also done in ufd_version_check() already.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-2-git-send-email-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Paolo Bonzini
98a43bf0bb MAINTAINERS: add maintainers for qtest
Thomas has been doing a lot of work on qom-test and device-introspection-test,
and Laurent has ported libqos to sPAPR and co-mentored Emanuele on the
upcoming qtest device framework.  They deserve recognition. :)

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Marc-André Lureau
48285ba2d6 megasas: fix sglist leak
tests/cdrom-test -p /x86_64/cdrom/boot/megasas

Produces the following ASAN leak.

==25700==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 16 byte(s) in 1 object(s) allocated from:
    #0 0x7f06f8faac48 in malloc (/lib64/libasan.so.5+0xeec48)
    #1 0x7f06f87a73c5 in g_malloc (/lib64/libglib-2.0.so.0+0x523c5)
    #2 0x55a729f17738 in pci_dma_sglist_init /home/elmarco/src/qq/include/hw/pci/pci.h:818
    #3 0x55a729f2a706 in megasas_map_dcmd /home/elmarco/src/qq/hw/scsi/megasas.c:698
    #4 0x55a729f39421 in megasas_handle_dcmd /home/elmarco/src/qq/hw/scsi/megasas.c:1574
    #5 0x55a729f3f70d in megasas_handle_frame /home/elmarco/src/qq/hw/scsi/megasas.c:1955
    #6 0x55a729f40939 in megasas_mmio_write /home/elmarco/src/qq/hw/scsi/megasas.c:2119
    #7 0x55a729f41102 in megasas_port_write /home/elmarco/src/qq/hw/scsi/megasas.c:2170
    #8 0x55a729220e60 in memory_region_write_accessor /home/elmarco/src/qq/memory.c:527
    #9 0x55a7292212b3 in access_with_adjusted_size /home/elmarco/src/qq/memory.c:594
    #10 0x55a72922cf70 in memory_region_dispatch_write /home/elmarco/src/qq/memory.c:1473
    #11 0x55a7290f5907 in flatview_write_continue /home/elmarco/src/qq/exec.c:3255
    #12 0x55a7290f5ceb in flatview_write /home/elmarco/src/qq/exec.c:3294
    #13 0x55a7290f6457 in address_space_write /home/elmarco/src/qq/exec.c:3384
    #14 0x55a7290f64a8 in address_space_rw /home/elmarco/src/qq/exec.c:3395
    #15 0x55a72929ecb0 in kvm_handle_io /home/elmarco/src/qq/accel/kvm/kvm-all.c:1729
    #16 0x55a7292a0db5 in kvm_cpu_exec /home/elmarco/src/qq/accel/kvm/kvm-all.c:1969
    #17 0x55a7291c4212 in qemu_kvm_cpu_thread_fn /home/elmarco/src/qq/cpus.c:1215
    #18 0x55a72a966a6c in qemu_thread_start /home/elmarco/src/qq/util/qemu-thread-posix.c:504
    #19 0x7f06ed486593 in start_thread (/lib64/libpthread.so.0+0x7593)

Move the qemu_sglist_destroy() from megasas_complete_command() to
megasas_unmap_frame(), so map/unmap are balanced.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180814141247.32336-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-08-23 13:32:50 +02:00
Julia Suvorova
7351681ec2 chardev/char-fe: Fix typos
Fixup some typos in the comments.

Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <20180813093402.10852-1-jusual@mail.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Murilo Opsfelder Araujo
1b0578f5c4 qemu-pr-helper: Fix build on CentOS 7
After commit b3f1c8c413 "qemu-pr-helper: use new
libmultipath API", QEMU started using new libmultipath API, which is not
available on CentOS 7.x.

This fixes that by probing the new libmultipath API in configure.  If it fails,
then try probing the old API.  If it fails, then consider libmultipath not
available.

With this, configure script defines CONFIG_MPATH_NEW_API that is used in
scsi/qemu-pr-helper.c to use the new libmultipath API.

Fixes: b3f1c8c413
BugLink: https://bugs.launchpad.net/qemu/+bug/1786343
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20180810141116.24016-1-muriloo@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Paolo Bonzini
1a5c63ce88 checkpatch: fix filename detection when using -f
Fix $realfile filename when using -f/--file to not remove first level
directory as if the filename was used in a -P1 patch.  Only strip the
first level directory (typically a or b) for P1 patches.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(extracted from Linux commit 2b7ab45395dc4d91ef30985f76d90a8f28f58c27)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Paolo Bonzini
edd7541b8c fix "Missing break in switch" coverity reports
Many of these are marked as "intentional/fix required" because they
just need adding a fall through comment.  This is exactly what this
patch does, except for target/mips/translate.c where it is easier to
duplicate the code, and hw/audio/sb16.c where I consulted the DOSBox
sources and decide to just remove the LOG_UNIMP before the fallthrough.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Paolo Bonzini
154c1d1f96 es1370: simplify MemoryRegionOps
Use the automatic subregister extraction from the memory API, and avoid
that Coverity complains about missing fallthrough comments.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Guenter Roeck
a736d719e7 scsi: mptsas: Mark as storage device
mptsas1068 is currently listed as uncategorized device.
Mark it as storage device.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <1533076133-22745-1-git-send-email-linux@roeck-us.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Paolo Bonzini
06d09a018f tests: virtio: separate ccw tests from libqos
Because qtest does not support s390 channel I/O, s390 only performs smoke tests on
those few devices that do not have any functional tests.  Therefore, every time we
add functional tests for a virtio device, the choice is between removing
those tests from the s390 suite (so that s390 actually _loses_ coverage)
or sprinkling the test with architecture checks.

This patch simply creates a ccw-specific test that only performs smoke tests on
all virtio-ccw devices.  If channel I/O support is ever added to qtest and libqos,
then this file can go away.  In the meanwhile, it simplifies maintenance and
makes sure that all virtio devices are tested.

Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Peter Maydell
659b11e7a7 linux-user fixes:
- netlink fixes (add missing types, fix MSG_TRUNC)
 - sh4 fix (tcg state)
 - sparc32plus fix (truncate address space to 32bit)
 - add x86_64 binfmt data
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbeyOIAAoJEPMMOL0/L74843oQAJCbDedfagKvmhMBFxWqFsp6
 En7UuUjh6MtOgb++5W47RY4LoVi12IGys5qvXLM3+Gar1l5oFgQaG58jnsUgl4uO
 o+QnsM+KqsTnYlrlQOviY8US+9eNoMP/dp/sAwF0NbpQpKUTiiWv/QQ6B8YC/x5O
 yv016xn+9ul7HrS7H57ah4lrm5YJcFh54pnKMzW6f40ekPiXIrbKicgXKUbR9Fg4
 c1Kxqwo+rxGS4tZ6aB+RFvu5dQ8NMxX4DhQUYXL1H8JSMR+fxPY3nzYTNqyFUwu9
 Qb8wkf/sP4hPz3QIay/ha1ThmAJQJqJfrWDD9Kx5JrMF1YLFSR9dfx2lmjlgHjbr
 TsAkpKHSsM0azqnFlJ5khmEjC7aJSxmsd9PQwH0VOnmuszAej9a13E9A1kwdA54N
 JAzRBjuxO5Y2W7MXiqlfNI+XNBLa7BnXIRR1pa8icSHCyFfXxhQSsa80YF0JZ6JE
 j7ACiXkxmcMdJUjxRLL24rCERnanSwIHPjsxdVkJHaMaO+L0eiMH2ZcboQbTcnlK
 L6Pl0sD4kBBGlyN5V0MVLSMMWfm9OXyTSz8bAGUt7MV574oq6vyub37I44l6FXKK
 RPUMaSuFBOD3kaA2HP+bmRumrCHZ/eGhsmkFcquPxML/F+tXDAT6WCd2FuBGmA5c
 UkCSNXY6zdESgnc76G1u
 =wHSV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging

linux-user fixes:
- netlink fixes (add missing types, fix MSG_TRUNC)
- sh4 fix (tcg state)
- sparc32plus fix (truncate address space to 32bit)
- add x86_64 binfmt data

# gpg: Signature made Mon 20 Aug 2018 21:24:40 BST
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.1-pull-request:
  linux-user: add QEMU_IFLA_INFO_KIND nested type for tun
  linux-user: update netlink route types
  linux-user: introduce QEMU_RTA_* to use with rtattr_type_t
  linux-user: fix recvmsg()/recvfrom() with netlink and MSG_TRUNC
  sh4: fix use_icount with linux-user
  linux-user: fix 32bit g2h()/h2g()
  qemu-binfmt-conf.sh: add x86_64 target

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-21 11:36:15 +01:00
Peter Maydell
55f4e79d79 pc: fixes
This includes nvdimm persistence fixes queued before the release.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbepoTAAoJECgfDbjSjVRpLioH/3BPps8FLh4x2gZSq3B+u72O
 RYUA3I3TilEGyc9yf8o7e1Hf+pQAJBEmulcnKxXFVWZIJ1GVLPt4NZCMQGiPDnJL
 +RCT/Q64PUy09hRjddAasikrvXa4YOsRgBgJJToO7v9PSQSaU3fC7O3hNea7KcF/
 C4SSqkUgxyDhCCYHHblpKxFz/wtwy4ZaCGSdozIdmKNPJ6/ye8wOQ1Mq9e1Mwp18
 S6ilJub5IwB6aM2KVMmX4AFomF4u2cn153ts8fI+Dyo4/NE6P4+viDlz3BOBKdzm
 kmd49h6/n4Lenoo4oI1yNHSuIJJTVfvnoLu6rG7mPbQKgxNd1uN4KuUIygU5PCY=
 =Xcaj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc: fixes

This includes nvdimm persistence fixes queued before the release.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 20 Aug 2018 11:38:11 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  migration/ram: ensure write persistence on loading all data to PMEM.
  migration/ram: Add check and info message to nvdimm post copy.
  mem/nvdimm: ensure write persistence to PMEM in label emulation
  hostmem-file: add the 'pmem' option
  configure: add libpmem support
  memory, exec: switch file ram allocation functions to 'flags' parameters
  memory, exec: Expose all memory block related flags.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-21 10:23:53 +01:00
Peter Maydell
90b9508e21 qemu-sparc.for-upstream queue
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAlt7CoweHG1hcmsuY2F2
 ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfgWkH/A3gJ6Gg+D5GTV7C
 p8L1i5Jx+WYWArxZhsveoyZBRXczCH1tR9X7Y8rCNelcU9wqwcNS8ymGYqj87cq8
 85apbdFQH2otLilgMH/QIIjmpz3QMY9AnYBpkaJ4OcoNZodZH8zWOVTn5W377ivI
 rpvjeHJA8HmLvjcaOD9ZLL2d4L3bbMMmok1YvI4l1hwkRyzFVFmTrNmIRWfCS2JH
 Jvw0L1D9N2w/CIJItoSlD+3n3Z6VBuLqIBkbVfKs+zmASGrnXaC6MRMNzgtWTjJt
 MUplcRiOW3DSnbUSdoAP8h47YvmAge0oAPbgS4e0qMJHlXTkS8JalJGGiktpYTLN
 zEEvRgo=
 =gLcV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc.for-upstream-20180820' into staging

qemu-sparc.for-upstream queue

# gpg: Signature made Mon 20 Aug 2018 19:38:04 BST
# gpg:                using RSA key 5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc.for-upstream-20180820:
  sun4m: don't use legacy fw_cfg_init_mem() function
  sun4u: ensure kernel_top is always initialised

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-21 09:24:19 +01:00
Laurent Vivier
70c61d4f78 linux-user: add QEMU_IFLA_INFO_KIND nested type for tun
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-5-laurent@vivier.eu>
2018-08-20 22:07:40 +02:00
Laurent Vivier
90cce2a106 linux-user: update netlink route types
Add RTA_PREF and RTA_CACHEINFO.

Fix following errors when we start gedit:

  Unknown host RTA type: 12
  Unknown host RTA type: 20

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-4-laurent@vivier.eu>
2018-08-20 22:07:19 +02:00
Laurent Vivier
3c3ab559c1 linux-user: introduce QEMU_RTA_* to use with rtattr_type_t
Following commit will introduce RTA_PREF that appears only with
kernel v4.1. To avoid to manage a specific case for it, this patch
introduces the full list of rtattr_type_t prefixed with QEMU_ (as we
did for IFLA values)

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-3-laurent@vivier.eu>
[lv: added more RTA_* from linux v4.18]
2018-08-20 22:05:42 +02:00
Laurent Vivier
2a03d3e6ae linux-user: fix recvmsg()/recvfrom() with netlink and MSG_TRUNC
If recvmsg()/recvfrom() are used with the MSG_TRUNC flag, they return the
real length even if it was longer than the passed buffer.
So when we translate the buffer we must check we don't go beyond the
end of the buffer.

Bug: https://github.com/vivier/qemu-m68k/issues/33
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-2-laurent@vivier.eu>
2018-08-20 22:03:49 +02:00
Mark Cave-Ayland
8498321421 sun4m: don't use legacy fw_cfg_init_mem() function
Instead initialise the device via qdev to allow us to set device properties
directly as required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-08-20 19:18:31 +01:00
Mark Cave-Ayland
3ac24188ec sun4u: ensure kernel_top is always initialised
Valgrind reports that when loading a non-ELF kernel, kernel_top may be used
uninitialised when checking for an initrd.

Since there are no known non-ELF kernels for SPARC64 then we can simply
initialise kernel_top to 0 and then skip the initrd load process if it hasn't
been set by load_elf().

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-08-20 19:18:31 +01:00
Peter Maydell
d0092d90eb First round of s390x patches for 3.1:
- add compat machine for 3.1
 - remove deprecated 's390-squash-mcss' option
 - cpu models: add "max" cpu model, enhance feature group code
 - kvm: add support for etoken facility and huge page backing
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAlt6uGoSHGNvaHVja0By
 ZWRoYXQuY29tAAoJEN7Pa5PG8C+vFPkP/jD95oIG63Zqgr8QKOxucl2jjTr1lPlt
 F6VXJlAz/GEX8oaViFi8k7+/8c6hrLuGorEhZ/OqQdlqNa1wqA5zDw3bKzfyiXIV
 75rHkbDB4eLPfaj6oziwOf7Eb1k25552Xd/LnU09zj7TlLF+U3ud4LeKwF7KapOt
 1e2/WkyXXSZ8Qdwi54mx4wZGjGNqABjBW/IURhfXUNt6II1dSnDat9bpd30Mquri
 fFobgmOfaJBrS5Yzw4lGvcWwE50FmJndc0T1HKd4ccaOteg+8e2Fls8RotFibbWy
 Yz6FrtVD5Rqmk7nHnkiCgVGvFNADSmY0Yf2XcaGV0DA/LU3FYvbEKEtZgOzOEjFW
 dBhx0s8h0MqPB+Jvyl9jSwOgfdSM+kGT45kNHegVTjAr+rl0/oUOdnwrxc2X2ykn
 ajCd/obXEzZzrp73dS+tsqA+gasN8dNEZy1NNa0CI5zvXlocPrL/ts2S3C1CWuE5
 qa8MT37UNBdc6nydlOiJ4pt5Zf/OgECORogMsaB/y4N1387/RA1rhHciaqJs93Pq
 lLHMttAs4Gr1ACyQqcJ3t5bj+Pa1C30m4QZkevjhJpJXoMMOAGuUCYSNmD3UhvLf
 ViUy+2ep3EE3aU33NmuK7sM4lC2v6xKzxr5p2piuIf4sTginuvvGL9r4FeOVQ5jf
 JX50fXST7vlf
 =71Z2
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180820' into staging

First round of s390x patches for 3.1:
- add compat machine for 3.1
- remove deprecated 's390-squash-mcss' option
- cpu models: add "max" cpu model, enhance feature group code
- kvm: add support for etoken facility and huge page backing

# gpg: Signature made Mon 20 Aug 2018 13:47:38 BST
# gpg:                using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20180820:
  s390x: Enable KVM huge page backing support
  s390x/kvm: add etoken facility
  linux-headers: update
  s390x/cpumodel: Add "-cpu max" support
  s390x: remove 's390-squash-mcss' option
  s390x/cpumodel: enum type S390FeatGroup now gets generated
  s390x: introduce 3.1 compat machine

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20 17:41:18 +01:00