Fix LoongArch check-tcg error:
TEST hello on loongarch64
qemu-system-loongarch64: Some ROM regions are overlapping
These ROM regions might have been loaded by direct user request or by default.
They could be BIOS/firmware images, a guest kernel, initrd or some other file loaded into guest memory.
Check whether you intended to load all this guest code, and whether it has been built to load to the correct addresses.
The following two regions overlap (in the memory address space):
hello ELF program header segment 0 (addresses 0x0000000000200000 - 0x0000000000242000)
fdt (addresses 0x0000000000200000 - 0x0000000000300000)
make[1]: *** [Makefile:177: run-hello] Error 1
Fixes: 021836936e ("hw/loongarch: Load FDT table into dram memory space")
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221109020449.978064-1-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Short queue with just a single pnv-phb fix from Thomas Huth.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY24dtwAKCRA82cqW3gMx
ZNlDAQC+yqONSkYvoANSPNDuMtcK0Lk7KNXFTx5cg8ASNym0twEAkA/YuNv4t0m2
9IRfh/xJ+AhKf6VYKbUwftAsZGPTpAc=
=U0me
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20221111' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-11-11:
Short queue with just a single pnv-phb fix from Thomas Huth.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY24dtwAKCRA82cqW3gMx
# ZNlDAQC+yqONSkYvoANSPNDuMtcK0Lk7KNXFTx5cg8ASNym0twEAkA/YuNv4t0m2
# 9IRfh/xJ+AhKf6VYKbUwftAsZGPTpAc=
# =U0me
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 11 Nov 2022 05:02:31 EST
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20221111' of https://gitlab.com/danielhb/qemu:
hw/pci-host/pnv_phb: Avoid quitting QEMU if hotplug of pnv-phb-root-port fails
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Those typos are in files which are used to generate the QEMU manual.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221110190825.879620-1-sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[thuth: update sentence in can.rst as suggested by Peter]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replaces TABs with spaces, making sure to have a consistent coding style
of 4 space indentations in the net subsystem.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/377
Signed-off-by: Ahmed Abouzied <email@aabouzied.com>
Message-Id: <20210614183849.20622-1-email@aabouzied.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: Fixed mis-aligned indentation in some of the files]
Signed-off-by: Thomas Huth <thuth@redhat.com>
If configuring with "--disable-system --disable-user --enable-guest-agent"
the linking currently fails with:
qga/qemu-ga.p/commands.c.o: In function `qmp_command_info':
build/../../home/thuth/devel/qemu/qga/commands.c:70: undefined reference to `qmp_command_name'
build/../../home/thuth/devel/qemu/qga/commands.c:71: undefined reference to `qmp_command_is_enabled'
build/../../home/thuth/devel/qemu/qga/commands.c:72: undefined reference to `qmp_has_success_response'
qga/qemu-ga.p/commands.c.o: In function `qmp_guest_info':
build/../../home/thuth/devel/qemu/qga/commands.c:82: undefined reference to `qmp_for_each_command'
qga/qemu-ga.p/commands.c.o: In function `qmp_guest_exec':
build/../../home/thuth/devel/qemu/qga/commands.c:410: undefined reference to `qbase64_decode'
qga/qemu-ga.p/channel-posix.c.o: In function `ga_channel_open':
build/../../home/thuth/devel/qemu/qga/channel-posix.c:214: undefined reference to `unix_listen'
build/../../home/thuth/devel/qemu/qga/channel-posix.c:228: undefined reference to `socket_parse'
build/../../home/thuth/devel/qemu/qga/channel-posix.c:234: undefined reference to `socket_listen'
qga/qemu-ga.p/commands-posix.c.o: In function `qmp_guest_file_write':
build/../../home/thuth/devel/qemu/qga/commands-posix.c:527: undefined reference to `qbase64_decode'
Let's make sure that we also compile and link the required files if
the system emulators have not been enabled.
Message-Id: <20221110083626.31899-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clang 15 from Fedora 37 complains:
../libdecnumber/dpd/decimal64.c:620:8: error: variable 'n' set but
not used [-Werror,-Wunused-but-set-variable]
Int n; /* output bunch counter */
^
1 error generated.
Remove the unused variable to silence the compiler warning.
Message-Id: <20221110131112.104283-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Variable unconnected used in usb_host_auto_check function is only incremented
but never read as line where it is read was disabled since introducing the code.
This causes 'Unused but set variable' warning on Clang 15.0.1 compiler.
Removing the variable and disabled code to prevent the warning.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <00df0db69ff9167d38bac81f6d03281955bd861a.1668009030.git.mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Variable block_count used in img_dd function is only incremented but never read.
This causes 'Unused but set variable' warning on Clang 15.0.1 compiler.
Removing the variable to prevent the warning.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <e86d5b57f9d13bde995c616a533b876f1fb8a527.1668009030.git.mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Variable n used in tulip_idblock_crc function is only incremented but never read.
This causes 'Unused but set variable' warning on Clang 15.0.1 compiler.
Removing the variable to prevent the warning.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <02e1560d115c208df32236df8916fed98429fda1.1668009030.git.mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Variable send_count used in rtl8139_cplus_transmit_one function is only
incremented but never read. This causes 'Unused but set variable' warning
on Clang 15.0.1 compiler.
Removing the variable to prevent the warning.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <15a32dd06c492216cbf27cd3ddcbe1e9afb8d8f5.1668009030.git.mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently QEMU terminates if you try to hotplug pnv-phb-root-port in
an environment where it is not supported, e.g. if doing this:
echo "device_add pnv-phb-root-port" | \
./qemu-system-ppc64 -monitor stdio -M powernv9
To avoid this problem, the pnv_phb_root_port_realize() function should
not use error_fatal when trying to set the properties which might not
be available.
Fixes: c2f3f78af5 ("ppc/pnv: set root port chassis and slot using Bus properties")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221109122210.115667-1-thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Run shell script:
cat << EOF | valgrind qemu-system-i386 -display none -machine accel=qtest, -m \
512M -M q35 -nodefaults -device virtio-net,netdev=net0 -netdev \
user,id=net0 -qtest stdio
outl 0xcf8 0x80000810
outl 0xcfc 0xc000
outl 0xcf8 0x80000804
outl 0xcfc 0x01
outl 0xc00d 0x0200
outl 0xcf8 0x80000890
outb 0xcfc 0x4
outl 0xcf8 0x80000889
outl 0xcfc 0x1c000000
outl 0xcf8 0x80000893
outw 0xcfc 0x100
EOF
Got:
==68666== Invalid read of size 8
==68666== at 0x688536: virtio_net_queue_enable (virtio-net.c:575)
==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492)
==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554)
==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521)
==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492)
==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554)
==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521)
==68666== by 0x6EBCD3: flatview_write_continue (physmem.c:2820)
==68666== by 0x6EBFBF: flatview_write (physmem.c:2862)
==68666== by 0x6EF5E7: address_space_write (physmem.c:2958)
==68666== by 0x6DFDEC: cpu_outw (ioport.c:70)
==68666== by 0x6F6DF0: qtest_process_command (qtest.c:480)
==68666== Address 0x29087fe8 is 24 bytes after a block of size 416 in arena "client"
That is reported by Alexander Bulekov. https://gitlab.com/qemu-project/qemu/-/issues/1309
Here, the queue_index is the index of the cvq, but in some cases cvq
does not have the corresponding NetClientState, so overflow appears.
I add a check here, ignore illegal queue_index and cvq queue_index.
Note the queue_index is below the VIRTIO_QUEUE_MAX but greater or equal
than cvq index could hit this. Other devices are similar.
Fixes: 7f863302 ("virtio-net: support queue_enable")
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1309
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20221110095739.130393-1-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi-vga-stub.c pulls in vga_int.h
However that currently pulls in ui/console.h which
breaks e.g. on systems without pixman.
It's better to remove ui/console.h from vga_int.h
and directly include it where it's used.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221109222112.74519-1-mst@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Reported-by: Frederic Bezies <fredbezies@gmail.com>
Reported-by: Laurent Vivier <lvivier@redhat.com>
Fixes: cfead31326 ("AcpiDevAmlIf interface to build VGA device descs")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
remove inline #inline - it's an obvious typo. Should just be remove
inline.
Fixes: 1ef47f40dc ("checkpatch: better pattern for inline comments")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221108135155.1121566-1-mst@redhat.com>
bdrv_parent_drained_{begin,end}_single() are supposed to operate on the
parent, not on the child, so they should not attempt to get the context
to poll from the child but the parent instead. BDRV_POLL_WHILE(c->bs)
does get the context from the child, so we should replace it with
AIO_WAIT_WHILE() on the parent's context instead.
This problem becomes apparent when bdrv_replace_child_noperm() invokes
bdrv_parent_drained_end_single() after removing a child from a subgraph
that is in an I/O thread. By the time bdrv_parent_drained_end_single()
is called, child->bs is NULL, and so BDRV_POLL_WHILE(c->bs, ...) will
poll the main loop instead of the I/O thread; but anything that
bdrv_parent_drained_end_single_no_poll() may have scheduled is going to
want to run in the I/O thread, but because we poll the main loop, the
I/O thread is never unpaused, and nothing is run, resulting in a
deadlock.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1215
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221107151321.211175-4-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_get_aio_context() asserts that blk->ctx is always equal to the root
BDS's context (if there is a root BDS). Therefore,
blk_do_set_aio_context() must update blk->ctx immediately after the root
BDS's context has changed.
Without this patch, the next patch would break iotest 238, because
bdrv_drained_begin() (called by blk_do_set_aio_context()) may then
invoke bdrv_child_get_parent_aio_context() on the root child, i.e.
blk_get_aio_context(). However, by this point, blk->ctx would not have
been updated and thus differ from the root node's context. This patch
fixes that.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221107151321.211175-3-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to use bdrv_child_get_parent_aio_context() from
bdrv_parent_drained_{begin,end}_single(), both of which are "I/O or GS"
functions.
Prior to 3ed4f708fe, all the implementations were I/O code anyway.
3ed4f708fe has put block jobs' AioContext field under the job mutex, so
to make child_job_get_parent_aio_context() work in an I/O context, we
need to take that lock there.
Furthermore, blk_root_get_parent_aio_context() is not marked as
anything, but is safe to run in an I/O context, so mark it that way now.
(blk_get_aio_context() is an I/O code function.)
With that done, all implementations explicitly are I/O code, so we can
mark bdrv_child_get_parent_aio_context() as I/O code, too, so callers
know it is safe to run from both GS and I/O contexts.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221107151321.211175-2-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Setting it to true can cause the device size to be queried from libblkio
in otherwise fast paths, degrading performance. Set it to false and
require users to refresh the device size explicitly instead.
Fixes: 4c8f4fda05 ("block/blkio: Tolerate device size changes")
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20221108144433.1334074-1-afaria@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The nvme-io_uring BlockDriver's path option must point at the character
device of an NVMe namespace, not at an image file.
Fixes: fd66dbd424 ("blkio: add libblkio block driver")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20221108142347.1322674-1-afaria@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Have write requests happen to the source node right when we start a
mirror job. The mirror filter node may encounter MirrorBDSOpaque.job
being NULL, but this should not cause a segfault.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221109165452.67927-6-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before this series, a mirror job in write-blocking mode would pause
issuing background requests while active requests are in flight. Thus,
if the source is constantly in use by active requests, no actual
progress can be made.
This series should have fixed that, making the mirror job issue
background requests even while active requests are in flight.
Have a new test case in 151 verify this.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221109165452.67927-5-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a small gap in mirror_start_job() before putting the mirror
filter node into the block graph (bdrv_append() call) and the actual job
being created. Before the job is created, MirrorBDSOpaque.job is NULL.
It is possible that requests come in when bdrv_drained_end() is called,
and those requests would see MirrorBDSOpaque.job == NULL. Have our
filter node handle that case gracefully.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221109165452.67927-4-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
mirror_wait_for_free_in_flight_slot() is the only remaining user of
mirror_wait_for_any_operation(), so inline the latter into the former.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221109165452.67927-3-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Waiting for all active writes to settle before daring to create a
background copying operation means that we will never do background
operations while the guest does anything (in write-blocking mode), and
therefore cannot converge. Yes, we also will not diverge, but actually
converging would be even nicer.
It is unclear why we did decide to wait for all active writes to settle
before creating a background operation, but it just does not seem
necessary. Active writes will put themselves into the in_flight bitmap
and thus properly block actually conflicting background requests.
It is important for active requests to wait on overlapping background
requests, which we do in active_write_prepare(). However, so far it was
not documented why it is important. Add such documentation now, and
also to the other call of mirror_wait_on_conflicts(), so that it becomes
more clear why and when requests need to actively wait for other
requests to settle.
Another thing to note is that of course we need to ensure that there are
no active requests when the job completes, but that is done by virtue of
the BDS being drained anyway, so there cannot be any active requests at
that point.
With this change, we will need to explicitly keep track of how many
bytes are in flight in active requests so that
job_progress_set_remaining() in mirror_run() can set the correct number
of remaining bytes.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2123297
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221109165452.67927-2-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Isolate the code protected by setjmp. Fixes:
translate-all.c: In function ‘tb_gen_code’:
translate-all.c:748:51: error: argument ‘cflags’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 334c388f25 ("pflash_cfi: Error out if device length
isn't a power of two") aimed to finish the effort started by
commit 06f1521795 ("pflash: Require backend size to match device,
improve errors"), but unfortunately we are not quite there since
various machines are still ready to accept incomplete / oversized
pflash backend images, and now fail, i.e. on Debian bullseye:
$ qemu-system-x86_64 \
-drive \
if=pflash,format=raw,unit=0,readonly=on,file=/usr/share/OVMF/OVMF_CODE.fd
qemu-system-x86_64: Device size must be a power of two.
where OVMF_CODE.fd comes from the ovmf package, which doesn't
pad the firmware images to the flash size:
$ ls -lh /usr/share/OVMF/
-rw-r--r-- 1 root root 3.5M Aug 19 2021 OVMF_CODE_4M.fd
-rw-r--r-- 1 root root 1.9M Aug 19 2021 OVMF_CODE.fd
-rw-r--r-- 1 root root 128K Aug 19 2021 OVMF_VARS.fd
Since we entered the freeze period to prepare the v7.2.0 release,
the safest is to revert commit 334c388f25.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1294
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221108175755.95141-1-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221108172633.860700-1-danielhb413@gmail.com>
The citing commit has incorrect code in vhost_vdpa_receive() that returns
zero instead of full packet size to the caller. This renders pending packets
unable to be freed so then get clogged in the tx queue forever. When device
is being reset later on, below assertion failure ensues:
0 0x00007f86d53bb387 in raise () from /lib64/libc.so.6
1 0x00007f86d53bca78 in abort () from /lib64/libc.so.6
2 0x00007f86d53b41a6 in __assert_fail_base () from /lib64/libc.so.6
3 0x00007f86d53b4252 in __assert_fail () from /lib64/libc.so.6
4 0x000055b8f6ff6fcc in virtio_net_reset (vdev=<optimized out>) at /usr/src/debug/qemu/hw/net/virtio-net.c:563
5 0x000055b8f7012fcf in virtio_reset (opaque=0x55b8faf881f0) at /usr/src/debug/qemu/hw/virtio/virtio.c:1993
6 0x000055b8f71f0086 in virtio_bus_reset (bus=bus@entry=0x55b8faf88178) at /usr/src/debug/qemu/hw/virtio/virtio-bus.c:102
7 0x000055b8f71f1620 in virtio_pci_reset (qdev=<optimized out>) at /usr/src/debug/qemu/hw/virtio/virtio-pci.c:1845
8 0x000055b8f6fafc6c in memory_region_write_accessor (mr=<optimized out>, addr=<optimized out>, value=<optimized out>,
size=<optimized out>, shift=<optimized out>, mask=<optimized out>, attrs=...) at /usr/src/debug/qemu/memory.c:483
9 0x000055b8f6fadce9 in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f867e7fb7e8, size=size@entry=1,
access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x55b8f6fafc20 <memory_region_write_accessor>,
mr=0x55b8faf80a50, attrs=...) at /usr/src/debug/qemu/memory.c:544
10 0x000055b8f6fb1d0b in memory_region_dispatch_write (mr=mr@entry=0x55b8faf80a50, addr=addr@entry=20, data=0, op=<optimized out>,
attrs=attrs@entry=...) at /usr/src/debug/qemu/memory.c:1470
11 0x000055b8f6f62ada in flatview_write_continue (fv=fv@entry=0x7f86ac04cd20, addr=addr@entry=549755813908, attrs=...,
attrs@entry=..., buf=buf@entry=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=len@entry=1, addr1=20, l=1,
mr=0x55b8faf80a50) at /usr/src/debug/qemu/exec.c:3266
12 0x000055b8f6f62c8f in flatview_write (fv=0x7f86ac04cd20, addr=549755813908, attrs=...,
buf=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=1) at /usr/src/debug/qemu/exec.c:3306
13 0x000055b8f6f674cb in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=<optimized out>,
len=<optimized out>) at /usr/src/debug/qemu/exec.c:3396
14 0x000055b8f6f67575 in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=...,
buf=buf@entry=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=<optimized out>, is_write=<optimized out>)
at /usr/src/debug/qemu/exec.c:3406
15 0x000055b8f6fc1cc8 in kvm_cpu_exec (cpu=cpu@entry=0x55b8f9aa0e10) at /usr/src/debug/qemu/accel/kvm/kvm-all.c:2410
16 0x000055b8f6fa5f5e in qemu_kvm_cpu_thread_fn (arg=0x55b8f9aa0e10) at /usr/src/debug/qemu/cpus.c:1318
17 0x000055b8f7336e16 in qemu_thread_start (args=0x55b8f9ac8480) at /usr/src/debug/qemu/util/qemu-thread-posix.c:519
18 0x00007f86d575aea5 in start_thread () from /lib64/libpthread.so.0
19 0x00007f86d5483b2d in clone () from /lib64/libc.so.6
Make vhost_vdpa_receive() return the size passed in as is, so that the
caller qemu_deliver_packet_iov() would eventually propagate it back to
virtio_net_flush_tx() to release pending packets from the async_tx queue.
Which corresponds to the drop path where qemu_sendv_packet_async() returns
non-zero in virtio_net_flush_tx().
Fixes: 846a1e85da ("vdpa: Add dummy receive callback")
Cc: Eugenio Perez Martin <eperezma@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221108041929.18417-2-jasowang@redhat.com>
The TABs should be replaced with spaces, to make sure that we have a
consistent coding style with an indentation of 4 spaces everywhere.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370
Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com>
Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The TABs should be replaced with spaces, to make sure that we have a
consistent coding style with an indentation of 4 spaces everywhere.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370
Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com>
Message-Id: <5cefd05b4d3721d416e48e6df19df18cb6338933.1666707782.git.amarjargal16@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The TABs should be replaced with spaces, to make sure that we have a
consistent coding style with an indentation of 4 spaces everywhere.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com>
Message-Id: <9a0d0718aafaa52029fad76a149f3200b6bba0dd.1666707782.git.amarjargal16@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
zPCI enhancement features (interpretation and forward assist) were
recently introduced to improve performance on PCI passthrough devices.
To maintain the same behaviour on older Z machines, deactivate the
features with the associated properties.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-3-clg@kaod.org>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 59d1ce4439.
The "zpcii-disable" machine property is redundant with the "interpret"
zPCI device property. Remove it for clarification.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-2-clg@kaod.org>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
6 months ago Stefan Pejic stepped in as nanoMIPS maintainer
(see commit a 8e0e23445a "target/mips: Undeprecate nanoMIPS
ISA support in QEMU"), however today his email is bouncing:
** Message blocked **
Your message to stefan.pejic@syrmia.com has been blocked. See technical details below for more information.
The response from the remote server was:
550 5.4.1 Recipient address rejected: Access denied. AS(201806281) [DBAEUR03FT030.eop-EUR03.prod.protection.outlook.com]
To avoid unmaintained code, I feel forced to merge this code
back with the generic MIPS section.
Historical references:
- https://lore.kernel.org/qemu-devel/TY0PR03MB679726901BD6C6BE40114A2FE2A79@TY0PR03MB6797.apcprd03.prod.outlook.com/
- https://lore.kernel.org/qemu-devel/b858a20e97b74e7b90a94948314d0008@MTKMBS62N2.mediatek.inc/
Cc: Vince Del Vecchio <Vince.DelVecchio@mediatek.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <49f41916-687f-b9e5-2de7-9c658fe0d4c7@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-6-philmd@linaro.org>
There is no point in looking for a 48-bit opcode if we've
not read the second word for a 32-bit opcode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221106023735.5277-5-richard.henderson@linaro.org>
Split out a helper function for reading a uint16_t
with the correct endianness.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221106023735.5277-4-richard.henderson@linaro.org>
Since Disassemble wants the data in this format, collect
it that way. This allows using a loop to print the bytes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221106212852.152384-3-richard.henderson@linaro.org>
Reduce the number of local variables within the scope of the
setjmp by moving it to the existing helper. The actual length
returned from Disassemble is not used, because we have already
determined the length while reading bytes. Fixes:
nanomips.c: In function ‘print_insn_nanomips’:
nanomips.c:21925:14: error: variable ‘insn1’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21925:25: error: variable ‘insn2’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21925:36: error: variable ‘insn3’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21926:22: error: variable ‘buf’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221106212852.152384-2-richard.henderson@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-5-philmd@linaro.org>
Suggested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-4-philmd@linaro.org>
Fix:
disas/nanomips.c:12231:62: warning: format specifies type 'char *' but the argument has type 'uint64' (aka 'unsigned long long') [-Wformat]
return img_format("RESTOREF 0x%" PRIx64 ", %s", u_value, count_value);
~~ ^~~~~~~~~~~
%llu
Fixes: 4066c152b3 ("disas/nanomips: Remove IMMEDIATE functions")
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-3-philmd@linaro.org>
Some implementations (i.e. Loongson-2F) may decide to implement
a 64 bit FPU without implementing COP1X instructions.
As the eligibility of 64 bit FP instructions is already determined
by CP0St_FR, there is no need to check for COP1X again.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221102165719.190378-1-jiaxun.yang@flygoat.com>
[PMD: Add missing trailing parenthesis (buildfix)]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
