Test:
- read/write from/to the usart registers
- send/receive a character/string over the serial port
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-6-arnaud.minier@telecom-paris.fr
[PMM: fix checkpatch nits, remove commented out code]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the USART to the SoC and connect it to the other implemented devices.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-5-arnaud.minier@telecom-paris.fr
[PMM: fixed a few checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a function to change the settings of the
serial connection.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-4-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the ability to read and write characters to the
usart using the serial port.
The character transmission is based on the
cmsdk-apb-uart implementation.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-3-arnaud.minier@telecom-paris.fr
[PMM: fixed a few checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the basic infrastructure (register read/write, type...)
to implement the STM32L4x5 USART.
Also create different types for the USART, UART and LPUART
of the STM32L4x5 to deduplicate code and enable the
implementation of different behaviors depending on the type.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-2-arnaud.minier@telecom-paris.fr
[PMM: update to new reset hold method signature;
fixed a few checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some devices and machines need to handle the reset before a vmsave
snapshot is loaded differently -- the main user is the handling of
RNG seed information, which does not want to put a new RNG seed into
a ROM blob when we are doing a snapshot load.
Currently this kind of reset handling is supported only for:
* TYPE_MACHINE reset methods, which take a ShutdownCause argument
* reset functions registered with qemu_register_reset_nosnapshotload
To allow a three-phase-reset device to also distinguish "snapshot
load" reset from the normal kind, add a new ResetType
RESET_TYPE_SNAPSHOT_LOAD. All our existing reset methods ignore
the reset type, so we don't need to update any device code.
Add the enum type, and make qemu_devices_reset() use the
right reset type for the ShutdownCause it is passed. This
allows us to get rid of the device_reset_reason global we
were using to implement qemu_register_reset_nosnapshotload().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-7-peter.maydell@linaro.org
Update the reset documentation's example code to match the new API
for the hold and exit phase method APIs where they take a ResetType
argument.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-6-peter.maydell@linaro.org
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
We pass a ResetType argument to the Resettable class enter phase
method, but we don't pass it to hold and exit, even though the
callsites have it readily available. This means that if a device
cared about the ResetType it would need to record it in the enter
phase method to use later on. We should pass the type to all three
of the phase methods to avoid having to do that.
This coccinelle script adds the ResetType argument to the hold and
exit phases of the Resettable interface.
The first part of the script (rules holdfn_assigned, holdfn_defined,
exitfn_assigned, exitfn_defined) update implementations of the
interface within device models, both to change the signature of their
method implementations and to pass on the reset type when they invoke
reset on some other device.
The second part of the script is various special cases:
* method callsites in resettable_phase_hold(), resettable_phase_exit()
and device_phases_reset()
* updating the typedefs for the methods
* isl_pmbus_vr.c has some code where one device's reset method directly
calls the implementation of a different device's method
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-4-peter.maydell@linaro.org
Rather than directly calling the device's implementation of its 'hold'
reset phase, call device_cold_reset(). This means we don't have to
adjust this callsite when we add another argument to the function
signature for the hold and exit reset methods.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-3-peter.maydell@linaro.org
The npcm7xx_clk and npcm7xx_gcr device reset methods look at
the ResetType argument and only handle RESET_TYPE_COLD,
producing a warning if another reset type is passed. This
is different from how every other three-phase-reset method
we have works, and makes it difficult to add new reset types.
A better pattern is "assume that any reset type you don't know
about should be handled like RESET_TYPE_COLD"; switch these
devices to do that. Then adding a new reset type will only
need to touch those devices where its behaviour really needs
to be different from the standard cold reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-2-peter.maydell@linaro.org
Ever since the bFLT format support was added in 2006, there has been
a chunk of code in the file guarded by CONFIG_BINFMT_SHARED_FLAT
which is supposedly for shared library support. This is not enabled
and it's not possible to enable it, because if you do you'll run into
the "#error needs checking" in the calc_reloc() function.
Similarly, CONFIG_BINFMT_ZFLAT exists but can't be enabled because of
an "#error code needs checking" in load_flat_file().
This code is obviously unfinished and has never been used; nobody in
the intervening 18 years has complained about this or fixed it, so
just delete the dead code. If anybody ever wants the feature they
can always pull it out of git, or (perhaps better) write it from
scratch based on the current Linux bFLT loader rather than the one of
18 years ago.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240411115313.680433-1-peter.maydell@linaro.org
In soc_dma_set_request() we try to set a bit in a uint64_t, but we
do it with "1 << ch->num", which can't set any bits past 31;
any use for a channel number of 32 or more would fail due to
integer overflow.
This doesn't happen in practice for our current use of this code,
because the worst case is when we call soc_dma_init() with an
argument of 32 for the number of channels, and QEMU builds with
-fwrapv so the shift into the sign bit is well-defined. However,
it's obviously not the intended behaviour of the code.
Add casts to force the shift to be done as 64-bit arithmetic,
allowing up to 64 channels.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: afbb5194d4 ("Handle on-chip DMA controllers in one place, convert OMAP DMA to use it.")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Message-id: 20240409115301.21829-1-abelova@astralinux.ru
[PMM: Edit commit message to clarify that this doesn't actually
bite us in our current usage of this code.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the CPU implements FEAT_NMI, then turn on the NMI support in the
GICv3 too. It's permitted to have a configuration with FEAT_NMI in
the CPU (and thus NMI support in the CPU interfaces too) but no NMI
support in the distributor and redistributor, but this isn't a very
useful setup as it's close to having no NMI support at all.
We don't need to gate the enabling of NMI in the GIC behind a
machine version property, because none of our current CPUs
implement FEAT_NMI, and '-cpu max' is not something we maintain
migration compatibility across versions for. So we can always
enable the GIC NMI support when the CPU has it.
Neither hvf nor KVM support NMI in the GIC yet, so we don't enable
it unless we're using TCG.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240407081733.3231820-25-ruanjinjie@huawei.com
[PMM: Update comment and commit message]
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable FEAT_NMI on the 'max' CPU.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-24-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In vCPU Interface, if the vIRQ has the non-maskable property, report
vINMI to the corresponding vPE.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-23-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In CPU Interface, if the IRQ has the non-maskable property, report NMI to
the corresponding PE.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-22-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If GICD_CTLR_DS bit is zero and the NMI is non-secure, the NMI priority is
higher than 0x80, otherwise it is higher than 0x0. And save the interrupt
non-maskable property in hppi.nmi to deliver NMI exception. Since both GICR
and GICD can deliver NMI, it is both necessary to check whether the pending
irq is NMI in gicv3_redist_update_noirqset and gicv3_update_noirqset.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-21-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement icv_nmiar1_read() for icc_nmiar1_read(), so add definition for
ICH_LR_EL2.NMI and ICH_AP1R_EL2.NMI bit.
If FEAT_GICv3_NMI is supported, ich_ap_write() should consider ICV_AP1R_EL1.NMI
bit. In icv_activate_irq() and icv_eoir_write(), the ICV_AP1R_EL1.NMI bit
should be set or clear according to the Non-maskable property. And the RPR
priority should also update the NMI bit according to the APR priority NMI bit.
By the way, add gicv3_icv_nmiar1_read trace event.
If the hpp irq is a NMI, the icv iar read should return 1022 and trap for
NMI again
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: use cs->nmi_support instead of cs->gic->nmi_support]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-20-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the NMIAR CPU interface registers which deal with acknowledging NMI.
When introduce NMI interrupt, there are some updates to the semantics for the
register ICC_IAR1_EL1 and ICC_HPPIR1_EL1. For ICC_IAR1_EL1 register, it
should return 1022 if the intid has non-maskable property. And for
ICC_NMIAR1_EL1 register, it should return 1023 if the intid do not have
non-maskable property. Howerever, these are not necessary for ICC_HPPIR1_EL1
register.
And the APR and RPR has NMI bits which should be handled correctly.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Separate out whether cpuif supports NMI from whether the
GIC proper (IRI) supports NMI]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-19-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add GICR_INMIR0 register and support access GICR_INMIR0.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-17-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A SPI, PPI or SGI interrupt can have non-maskable property. So maintain
non-maskable property in PendingIrq and GICR/GICD. Since add new device
state, it also needs to be migrated, so also save NMI info in
vmstate_gicv3_cpu and vmstate_gicv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-16-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
So far, there is no FEAT_GICv3_NMI support in the in-kernel GIC, so make it
an error to try to set has-nmi=true for the KVM GICv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Message-id: 20240407081733.3231820-15-ruanjinjie@huawei.com
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a property has-nmi to the GICv3 device, and use this to set
the NMI bit in the GICD_TYPER register. This isn't visible to
guests yet because the property defaults to false and we won't
set it in the board code until we've landed all of the changes
needed to implement FEAT_GICV3_NMI.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-14-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt
with superpriority is always IRQ, never FIQ, so the NMI exception trap entry
behave like IRQ. And VINMI(vIRQ with Superpriority) can be raised from the
GIC or come from the hcrx_el2.HCRX_VINMI bit, VFNMI(vFIQ with Superpriority)
come from the hcrx_el2.HCRX_VFNMI bit.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-13-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wire the new NMI and VINMI interrupt line from the GIC to each CPU if it
is not GICv2.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240407081733.3231820-12-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Augment the GICv3's QOM device interface by adding one
new set of sysbus IRQ line, to signal NMI to each CPU.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-11-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set or clear PSTATE.ALLINT on taking an exception to ELx according to the
SCTLR_ELx.SPINTMASK bit.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-10-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add IS and FS bit in ISR_EL1 and handle the read. With CPU_INTERRUPT_NMI or
CPU_INTERRUPT_VINMI, both CPSR_I and ISR_IS must be set. With
CPU_INTERRUPT_VFNMI, both CPSR_F and ISR_FS must be set.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-9-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt
with superpriority is always IRQ, never FIQ, so handle NMI same as IRQ in
arm_phys_excp_target_el().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-8-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This only implements the external delivery method via the GICv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-7-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ALLINT MSR (immediate) to decodetree, in which the CRm is 0b000x. The
EL0 check is necessary to ALLINT, and the EL1 check is necessary when
imm == 1. So implement it inline for EL2/3, or EL1 with imm==0. Avoid the
unconditional write to pc and use raise_exception_ra to unwind.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-5-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for FEAT_NMI. NMI (FEAT_NMI) is an mandatory feature in
ARMv8.8-A and ARM v9.3-A.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-4-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When PSTATE.ALLINT is set, an IRQ or FIQ interrupt that is targeted to
ELx, with or without superpriority is masked. As Richard suggested, place
ALLINT bit in PSTATE in env->pstate.
In the pseudocode, AArch64.ExceptionReturn() calls SetPSTATEFromPSR(), which
treats PSTATE.ALLINT as one of the bits which are reinstated from SPSR to
PSTATE regardless of whether this is an illegal exception return or not. So
handle PSTATE.ALLINT the same way as PSTATE.DAIF in the illegal_return exit
path of the exception_return helper. With the change, exception entry and
return are automatically handled.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-3-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FEAT_NMI defines another three new bits in HCRX_EL2: TALLINT, HCRX_VINMI and
HCRX_VFNMI. When the feature is enabled, allow these bits to be written in
HCRX_EL2.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-2-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/m68k: Support semihosting on non-ColdFire targets
linux-user: do_setsockopt cleanups
linux-user: Add FITRIM ioctl
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmYpjHcdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+a/Af7BHmDB27U61b9i8et
cObewYH9y9M+iaCrIflNZPAaoguHDRKOuvw+PFT/dIo5FL2D509vYOuxUow1qLsy
q6b6kdvXROq9WU2NiuB86Abl/4mwwzxRhFah+Eh+OYSA2/pQnkcULkouLqxjFfF0
xTBzZtHtYdTbCTVRbpd6XrwLo7Qrs85ovl4wVD1r+T2T8FkvrryoNOA/VjUWxyeh
3b1X1I0wtOTnEA7JSr17JCXWZGENCmTO35r6WSYzJy5U/C59PjjgaaeMi3R3lQTJ
gg21EH0hlU1nTiPLg2ypj3l9NbIGAincAdDF/jufee+R75YSPdpKoDH8tUlUGsnM
CRx5Xg==
=J+5K
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240424' of https://gitlab.com/rth7680/qemu into staging
meson: Make DEBUG_REMAP a meson option
target/m68k: Support semihosting on non-ColdFire targets
linux-user: do_setsockopt cleanups
linux-user: Add FITRIM ioctl
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmYpjHcdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+a/Af7BHmDB27U61b9i8et
# cObewYH9y9M+iaCrIflNZPAaoguHDRKOuvw+PFT/dIo5FL2D509vYOuxUow1qLsy
# q6b6kdvXROq9WU2NiuB86Abl/4mwwzxRhFah+Eh+OYSA2/pQnkcULkouLqxjFfF0
# xTBzZtHtYdTbCTVRbpd6XrwLo7Qrs85ovl4wVD1r+T2T8FkvrryoNOA/VjUWxyeh
# 3b1X1I0wtOTnEA7JSr17JCXWZGENCmTO35r6WSYzJy5U/C59PjjgaaeMi3R3lQTJ
# gg21EH0hlU1nTiPLg2ypj3l9NbIGAincAdDF/jufee+R75YSPdpKoDH8tUlUGsnM
# CRx5Xg==
# =J+5K
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 Apr 2024 03:49:27 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20240424' of https://gitlab.com/rth7680/qemu:
target/m68k: Support semihosting on non-ColdFire targets
target/m68k: Perform the semihosting test during translate
target/m68k: Pass semihosting arg to exit
linux-user: Add FITRIM ioctl
linux-user: do_setsockopt: eliminate goto in switch for SO_SNDTIMEO
linux-user: do_setsockopt: make ip_mreq_source local to the place where it is used
linux-user: do_setsockopt: make ip_mreq local to the place it is used and inline target_to_host_ip_mreq()
linux-user: do_setsockopt: fix SOL_ALG.ALG_SET_KEY
meson: Make DEBUG_REMAP a meson option
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to the m68k semihosting spec:
"The instruction used to trigger a semihosting request depends on the
m68k processor variant. On ColdFire, "halt" is used; on other processors
(which don't implement "halt"), "bkpt #0" may be used."
Add support for non-CodeFire processors by matching BKPT #0 instructions.
Signed-off-by: Keith Packard <keithp@keithp.com>
[rth: Use semihosting_test()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace EXCP_HALT_INSN by EXCP_SEMIHOSTING. Perform the pre-
and post-insn tests during translate, leaving only the actual
semihosting operation for the exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of using d0 (the semihost function number), use d1 (the
provide exit status).
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230802161914.395443-2-keithp@keithp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tiny patch to add the missing FITRIM ioctl.
Signed-off-by: Michael Vogt <mvogt@redhat.com>
Message-Id: <20240403092048.16023-2-michael.vogt@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There's identical code for SO_SNDTIMEO and SO_RCVTIMEO, currently
implemented using an ugly goto into another switch case. Eliminate
that using arithmetic if, making code flow more natural.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-5-mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-4-mjt@tls.msk.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ip_mreq is declared at the beginning of do_setsockopt(), while
it is used in only one place. Move its declaration to that very
place and replace pointer to alloca()-allocated memory with the
structure itself.
target_to_host_ip_mreq() is used only once, inline it.
This change also properly handles TARGET_EFAULT when the address
is wrong.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-3-mjt@tls.msk.ru>
[rth: Fix braces, adjust optlen to match host structure size]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This setsockopt accepts zero-lengh optlen (current qemu implementation
does not allow this). Also, there's no need to make a copy of the key,
it is enough to use lock_user() (which accepts zero length already).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2197
Fixes: f31dddd2fc "linux-user: Add support for setsockopt() option SOL_ALG"
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-2-mjt@tls.msk.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently DEBUG_REMAP is a macro that needs to be manually #defined to
be activated, which makes it hard to have separate build directories
dedicated to testing the code with it. Promote it to a meson option.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240312002402.14344-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
