Prevent the realization of a virtio device that attempts to use the
VIRTIO_F_NOTIFICATION_DATA transport feature without disabling
ioeventfd.
Due to ioeventfd not being able to carry the extra data associated with
this feature, having both enabled is a functional mismatch and therefore
Qemu should not continue the device's realization process.
Although the device does not yet know if the feature will be
successfully negotiated, many devices using this feature wont actually
work without this extra data and would fail FEATURES_OK anyway.
If ioeventfd is able to work with the extra notification data in the
future, this compatibility check can be removed.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-3-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to virtio-pci devices for handling the extra data sent
from the driver to the device when the VIRTIO_F_NOTIFICATION_DATA
transport feature has been negotiated.
The extra data that's passed to the virtio-pci device when this
feature is enabled varies depending on the device's virtqueue
layout.
In a split virtqueue layout, this data includes:
- upper 16 bits: shadow_avail_idx
- lower 16 bits: virtqueue index
In a packed virtqueue layout, this data includes:
- upper 16 bits: 1-bit wrap counter & 15-bit shadow_avail_idx
- lower 16 bits: virtqueue index
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-2-jonah.palmer@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On setups with one or more virtio-net devices with vhost on,
dirty tracking iteration increases cost the bigger the number
amount of queues are set up e.g. on idle guests migration the
following is observed with virtio-net with vhost=on:
48 queues -> 78.11% [.] vhost_dev_sync_region.isra.13
8 queues -> 40.50% [.] vhost_dev_sync_region.isra.13
1 queue -> 6.89% [.] vhost_dev_sync_region.isra.13
2 devices, 1 queue -> 18.60% [.] vhost_dev_sync_region.isra.14
With high memory rates the symptom is lack of convergence as soon
as it has a vhost device with a sufficiently high number of queues,
the sufficient number of vhost devices.
On every migration iteration (every 100msecs) it will redundantly
query the *shared log* the number of queues configured with vhost
that exist in the guest. For the virtqueue data, this is necessary,
but not for the memory sections which are the same. So essentially
we end up scanning the dirty log too often.
To fix that, select a vhost device responsible for scanning the
log with regards to memory sections dirty tracking. It is selected
when we enable the logger (during migration) and cleared when we
disable the logger. If the vhost logger device goes away for some
reason, the logger will be re-selected from the rest of vhost
devices.
After making mem-section logger a singleton instance, constant cost
of 7%-9% (like the 1 queue report) will be seen, no matter how many
queues or how many vhost devices are configured:
48 queues -> 8.71% [.] vhost_dev_sync_region.isra.13
2 devices, 8 queues -> 7.97% [.] vhost_dev_sync_region.isra.14
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1710448055-11709-2-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
There could be a mix of both vhost-user and vhost-kernel clients
in the same QEMU process, where separate vhost loggers for the
specific vhost type have to be used. Make the vhost logger per
backend type, and have them properly reference counted.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1710448055-11709-1-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The implementation of configurable interrupts (interrupts supporting
edge selection) was incorrectly expecting alternating input levels :
this commits adds a new status field `irq_levels` to actually detect
edges.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-2-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Read boot-mode value as machine property and propagate that to
SLCR.BOOT_MODE register.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-3-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
boot-mode property sets user values into BOOT_MODE register, on hardware
these are derived from board switches.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-2-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A malicious or buggy guest may generated buffered ioreqs faster than
QEMU can process them in handle_buffered_iopage(). The result is a
livelock - QEMU continuously processes ioreqs on the main thread without
iterating through the main loop which prevents handling other events,
processing timers, etc. Without QEMU handling other events, it often
results in the guest becoming unsable and makes it difficult to stop the
source of buffered ioreqs.
To avoid this, if we process a full page of buffered ioreqs, stop and
reschedule an immediate timer to continue processing them. This lets
QEMU go back to the main loop and catch up.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240404140833.1557953-1-ross.lagerwall@citrix.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
When running in a stubdomain, the config space access via sysfs needs to
use BDF as seen inside stubdomain (connected via xen-pcifront), which is
different from the real BDF. For other purposes (hypercall parameters
etc), the real BDF needs to be used.
Get the in-stubdomain BDF by looking up relevant PV PCI xenstore
entries.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <35049e99da634a74578a1ff2cb3ae4cc436ede33.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
Introduce global xen_is_stubdomain variable when qemu is running inside
a stubdomain instead of dom0. This will be relevant for subsequent
patches, as few things like accessing PCI config space need to be done
differently.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <e66aa97dca5120f22e015c19710b2ff04f525720.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
The caller of smmu_iommu_mr wants to get sdev for smmuv3_flush_config().
Do it directly instead of bridging with an iommu mr pointer.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-id: 20240619002218.926674-1-nicolinc@nvidia.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Four mailbox properties are implemented as follows:
1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP
2. Device-specific private key: GET_PRIVATE_KEY and
SET_PRIVATE_KEY.
The customer OTP is located in the rows 36-43. The device-specific private key
is located in the rows 56-63.
The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000
when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates
this lock, which is undocumented. The lock also applies to the device-specific
private key.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace stubbed OTP memory region with the new OTP device.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The OTP device registers are currently stubbed. For now, the device
houses the OTP rows which will be accessed directly by other peripherals.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should call inflateEnd() like on success path to cleanup state in s
variable.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This struct has been unused since
Commit f932093ae1 ("hw/arm/bcm2836: Split out common part of BCM283X
classes")
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since a4c2735f35 (cpu: move Qemu[Thread|Cond] setup into common code,
2024-05-30) these fields are now allocated at cpu_common_initfn(). So
let's make sure we also free them at cpu_common_finalize().
Furthermore, the code also frees these on round robin, but we missed
'halt_cond'.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch fixes two points reported in coverity scan report [1]. Check
the MMIO access address with (addr + size), not just with the start offset
addr to make sure that the requested memory access not to exceed the
actual register region. We also updated (uint8_t *) to (uint32_t *) to
represent we are accessing the MMIO registers by dword-sized only.
[1] https://lore.kernel.org/qemu-devel/CAFEAcA82L-WZnHMW0X+Dr40bHM-EVq2ZH4DG4pdqop4xxDP2Og@mail.gmail.com/
Cc: Jeuk Kim <jeuk20.kim@gmail.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240623024555.78697-1-minwoo.im.dev@gmail.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
RISC-V virt is currently missing default type for block devices. Without
this being set, proper backend is not created when option like -cdrom
is used. So, make the virt board's default block device type be
IF_VIRTIO similar to other architectures.
We also need to set no_cdrom to avoid getting a default cdrom device.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240620064718.275427-1-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,imsics [1] requires a 'msi-cell' property. Add one
and set it zero.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240531202759.911601-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,imsics [1] predicts a 'qemu,imsics' enum in the
'compatible' property.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Linux DT docs for imsic [1] predicts an 'interrupt-controller@addr'
node, not 'imsic@addr', given this node inherits the
'interrupt-controller' node.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,aplic [1] predicts a 'riscv,delegation' property.
Not 'riscv,delegate'.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,aplic [1] predicts a 'qemu,aplic' enum in the
'compatible' property.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The correct name of the aplic controller node, as per Linux kernel DT
docs [1], is 'interrupt-controller@addr'.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll change the aplic DT nodename in the next patch and the name is
hardcoded in 2 different functions. Create a helper to change a single
place later.
While we're at it, in create_fdt_socket_aplic(), move 'aplic_name'
inside the conditional to avoid allocating a string that won't be used
when socket == NULL.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We need #address-cells properties in all interrupt controllers that are
referred by an interrupt-map [1]. For the RISC-V machine, both PLIC and
APLIC controllers must have this property.
PLIC already sets it in create_fdt_socket_plic(). Set the property for
APLIC in create_fdt_one_aplic().
[1] https://lore.kernel.org/linux-arm-kernel/CAL_JsqJE15D-xXxmELsmuD+JQHZzxGzdXvikChn6KFWqk6NzPw@mail.gmail.com/
Suggested-by: Anup Patel <apatel@ventanamicro.com>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
One fix and various cleanups for the SD card model.
-----BEGIN PGP SIGNATURE-----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=O5er
-----END PGP SIGNATURE-----
Merge tag 'sdmmc-20240624' of https://github.com/philmd/qemu into staging
SD/MMC patches queue
One fix and various cleanups for the SD card model.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmZ5cRUACgkQ4+MsLN6t
# wN59Qw//cUdjD287pB5Ml5aQqr9sOTyVnHUceZtz7AOZ5w8RM2tlPDgOImeLOvU6
# OV7qfWvNaUxtQxhfh5jpe8Pj4eHBtRQzA6a1AWToEvnN4189QWHZpqf5TUa4AlFS
# uAk7k2TkoNv9zbNKca0bP3L1x6sT9l0VPZBLaLbgdXDIX2ycD0r3NVQxXb/bJRgM
# 6pFRcLCF/isKzLQDwqnTa11hB/JDTvOU7xnY0kazGRvyWjbSvE2sOJzLNJXHkW0I
# /FNfRbOKJo2t+47Z5qSXUFFLeIEBTy7VqNBsOQ6sMIgrWzbOSrtBcuxKp0p9NCGH
# fdZHlDVRnNGXewUya4RjbmXiCNuGL4zJ82b2BaQZVd5ZwU2opIr8xO96WCojQ4dZ
# +Dq3uv7su3PUVOh95i38Eo93OG9jXFx642XD4q2uKu5j70IoGXAkIoLUcFkZZdGS
# 9rCsaNUHyHJrN6nXf3Cekvkqxz36p6QXaUF9I1vB0JF6CrexMD35sBUK+RE9k4uW
# LnqL7ZwQDGDGVl3kPS/VCXv1mMim4aRLSEIveq7Ui6dKzaaJMIIodZ8CFMuyTTsD
# cGE+Cd053nf6SzX3+kEZftNdjtJ906O8xIAw+RNdARYx003l4kUxgsPDk7ELyzIP
# Tb+VlZl2P+ROJmeWvRMTW7ZQ49M9IEMrg8zlGF4hLCxB1JndeOA=
# =O5er
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Jun 2024 06:13:57 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'sdmmc-20240624' of https://github.com/philmd/qemu:
hw/sd/sdcard: Add comments around registers and commands
hw/sd/sdcard: Inline BLK_READ_BLOCK / BLK_WRITE_BLOCK macros
hw/sd/sdcard: Add sd_invalid_mode_for_cmd to report invalid mode switch
hw/sd/sdcard: Only call sd_req_get_address() where address is used
hw/sd/sdcard: Factor sd_req_get_address() method out
hw/sd/sdcard: Only call sd_req_get_rca() where RCA is used
hw/sd/sdcard: Factor sd_req_get_rca() method out
hw/sd/sdcard: Have cmd_valid_while_locked() return a boolean value
hw/sd/sdcard: Trace update of block count (CMD23)
hw/sd/sdcard: Remove explicit entries for illegal commands
hw/sd/sdcard: Remove ACMD6 handler for SPI mode
hw/sd/sdcard: Use Load/Store API to fill some CID/CSD registers
hw/sd/sdcard: Use registerfield CSR::CURRENT_STATE definition
hw/sd/sdcard: Use HWBLOCK_SHIFT definition instead of magic values
hw/sd/sdcard: Fix typo in SEND_OP_COND command name
hw/sd/sdcard: Rewrite sd_cmd_ALL_SEND_CID using switch case (CMD2)
hw/sd/sdcard: Correct code indentation
hw/sd/sdcard: Avoid OOB in sd_read_byte() during unexpected CMD switch
bswap: Add st24_be_p() to store 24 bits in big-endian order
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
vfio_container_destroy() clears the resources allocated
VFIOContainerBase object. Now that VFIOContainerBase is a QOM object,
add an instance_finalize() handler to do the cleanup. It will be
called through object_unref().
Suggested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Just as we did for the VFIOContainerBase object, introduce an
instance_init() handler for the legacy VFIOContainer object and do the
specific initialization there.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
It's now empty.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Instead, use VFIO_IOMMU_GET_CLASS() to get the class pointer.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This allows us to move the initialization code from vfio_container_init(),
which we will soon remove.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Instead of allocating the container struct, create a QOM object of the
appropriate type.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
VFIOContainerBase was made a QOM interface because we believed that a
QOM object would expose all the IOMMU backends to the QEMU machine and
human interface. This only applies to user creatable devices or objects.
Change the VFIOContainerBase nature from interface to object and make
the necessary adjustments in the VFIO_IOMMU hierarchy.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Since the QEMU struct type representing the VFIO container is deduced
from the IOMMU type exposed by the host, this type should be well
defined *before* creating the container struct. This will be necessary
to instantiate a QOM object of the correct type in future changes.
Rework vfio_set_iommu() to extract the part doing the container
initialization and move it under vfio_create_container().
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This routine allocates the QEMU struct type representing the VFIO
container. It is minimal currently and future changes will do more
initialization.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Rework vfio_get_iommu_class() to return a literal class name instead
of a class object. We will need this name to instantiate the object
later on. Since the default case asserts, remove the error report as
QEMU will simply abort before.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The 'container' pointer has no other use than its 'fd' attribute.
Simplify the prototype to ease future changes.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Assign the base container VFIOAddressSpace 'space' pointer in
vfio_address_space_insert(). The ultimate goal is to remove
vfio_container_init() and instead rely on an .instance_init() handler
to perfom the initialization of VFIOContainerBase.
To be noted that vfio_connect_container() will assign the 'space'
pointer later in the execution flow. This should not have any
consequence.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
It prepares ground for a future change initializing the 'space' pointer
of VFIOContainerBase. The goal is to replace vfio_container_init() by
an .instance_init() handler when VFIOContainerBase is QOMified.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Extract vIOMMU code from vfio_sync_dirty_bitmap() to a new function and
restructure the code.
This is done in preparation for optimizing vIOMMU device dirty page
tracking. No functional changes intended.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[ clg: - Rebased on upstream
- Fixed typo in commit log ]
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Separate the changes that update the ranges from the listener, to
make it reusable in preparation to expand its use to vIOMMU support.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
[ clg: - Rebased on upstream
- Introduced vfio_dirty_tracking_update_range()
- Fixed typ in commit log ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Since vfio_devices_dma_logging_start() takes an 'Error **' argument,
best practices suggest to return a bool. See the api/error.h Rules
section. It will simplify potential changes coming after.
vfio_container_set_dirty_page_tracking() could be modified in the same
way but the errno value can be saved in the migration stream when
called from vfio_listener_log_global_stop().
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
As we have just removed the only implementation of
iommu_set_iova_ranges IOMMU MR callback in the virtio-iommu,
let's remove the call to the memory wrapper. Usable IOVA ranges
are now conveyed through the PCIIOMMUOps in VFIO-PCI.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Now that we use PCIIOMMUOps to convey information about usable IOVA
ranges we do not to implement the iommu_set_iova_ranges IOMMU MR
callback.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Compute the host reserved regions in virtio_iommu_set_iommu_device().
The usable IOVA regions are retrieved from the HostIOMMUDevice.
The virtio_iommu_set_host_iova_ranges() helper turns usable regions
into complementary reserved regions while testing the inclusion
into existing ones. virtio_iommu_set_host_iova_ranges() reuse the
implementation of virtio_iommu_set_iova_ranges() which will be
removed in subsequent patches. rebuild_resv_regions() is just moved.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Store the aliased bus and devfn in the HostIOMMUDevice.
This will be useful to handle info that are iommu group
specific and not device specific (such as reserved
iova ranges).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new HostIOMMUDevice callback that allows to
retrieve the usable IOVA ranges.
Implement this callback in the legacy VFIO and IOMMUFD VFIO
host iommu devices. This relies on the VFIODevice agent's
base container iova_ranges resource.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Implement PCIIOMMUOPs [set|unset]_iommu_device() callbacks.
In set(), the HostIOMMUDevice handle is stored in a hash
table indexed by PCI BDF. The object will allow to retrieve
information related to the physical IOMMU.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Store the agent device (VFIO or VDPA) in the host IOMMU device.
This will allow easy access to some of its resources.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
If check fails, host device (either VFIO or VDPA device) is not
compatible with current vIOMMU config and should not be passed to
guest.
Only aw_bits is checked for now, we don't care about other caps
before scalable modern mode is introduced.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Implement [set|unset]_iommu_device() callbacks in Intel vIOMMU.
In set call, we take a reference of HostIOMMUDevice and store it
in hash table indexed by PCI BDF.
Note this BDF index is device's real BDF not the aliased one which
is different from the index of VTDAddressSpace. There can be multiple
assigned devices under same virtual iommu group and share same
VTDAddressSpace, but each has its own HostIOMMUDevice.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Extract cap/ecap initialization in vtd_cap_init() to make code
cleaner.
No functional change intended.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
With HostIOMMUDevice passed, vIOMMU can check compatibility with host
IOMMU, call into IOMMUFD specific methods, etc.
Originally-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
pci_device_[set|unset]_iommu_device() call pci_device_get_iommu_bus_devfn()
to get iommu_bus->iommu_ops and call [set|unset]_iommu_device callback to
set/unset HostIOMMUDevice for a given PCI device.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Extract out pci_device_get_iommu_bus_devfn() from
pci_device_iommu_address_space() to facilitate
implementation of pci_device_[set|unset]_iommu_device()
in following patch.
No functional change intended.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Create host IOMMU device instance in vfio_attach_device() and call
.realize() to initialize it further.
Introuduce attribute VFIOIOMMUClass::hiod_typename and initialize
it based on VFIO backend type. It will facilitate HostIOMMUDevice
creation in vfio_attach_device().
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
It calls iommufd_backend_get_device_info() to get host IOMMU
related information and translate it into HostIOMMUDeviceCaps
for query with .get_cap().
For aw_bits, use the same way as legacy backend by calling
vfio_device_get_aw_bits() which is common for different vendor
IOMMU.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The realize function populates the capabilities. For now only the
aw_bits caps is computed for legacy backend.
Introduce a helper function vfio_device_get_aw_bits() which calls
range_get_last_bit() to get host aw_bits and package it in
HostIOMMUDeviceCaps for query with .get_cap(). This helper will
also be used by iommufd backend.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_HOST_IOMMU_DEVICE_IOMMUFD represents a host IOMMU device under
iommufd backend. It is abstract, because it is going to be derived
into VFIO or VDPA type'd device.
It will have its own .get_cap() implementation.
TYPE_HOST_IOMMU_DEVICE_IOMMUFD_VFIO is a sub-class of
TYPE_HOST_IOMMU_DEVICE_IOMMUFD, represents a VFIO type'd host IOMMU
device under iommufd backend. It will be created during VFIO device
attaching and passed to vIOMMU.
It will have its own .realize() implementation.
Opportunistically, add missed header to include/sysemu/iommufd.h.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_HOST_IOMMU_DEVICE_LEGACY_VFIO represents a host IOMMU device under
VFIO legacy container backend.
It will have its own realize implementation.
Suggested-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-21-philmd@linaro.org>
These macros only save 3 chars and make the code harder
to maintain, simply remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-20-philmd@linaro.org>
Having the mode switch displayed help to track incomplete
command implementations.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-19-philmd@linaro.org>
It will be useful later to assert only ADTC commands
(Addressed point-to-point Data Transfer Commands, defined
as the 'sd_adtc' enum) extract the address value from the
command argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-18-philmd@linaro.org>
Extract sd_cmd_get_address() so we can re-use it
in various SDProto handlers. Use CARD_CAPACITY and
HWBLOCK_SHIFT definitions instead of magic values.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-17-philmd@linaro.org>
It will be useful later to assert only AC commands
(Addressed point-to-point Commands, defined as the
'sd_ac' enum) extract the RCA value from the command
argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-16-philmd@linaro.org>
Extract sd_req_get_rca() so we can re-use it in various
SDProto handlers. Return a 16-bit value since RCA is 16-bit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-15-philmd@linaro.org>
NULL handler is already handled as illegal, no need to
duplicate (that keeps this array simpler to maintain).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-9-philmd@linaro.org>
There is no ACMD6 command in SPI mode, remove the pointless
handler introduced in commit 946897ce18 ("sdcard: handles
more commands in SPI mode"). Keep sd_cmd_unimplemented()
since we'll reuse it later.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-8-philmd@linaro.org>
The ld/st API helps noticing CID or CSD bytes refer
to the same field. Multi-bytes fields are stored MSB
first in CID / CSD.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-7-philmd@linaro.org>
Use registerfield-generated definitions to update card_status.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-6-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-5-philmd@linaro.org>
There is no SEND_OP_CMD but SEND_OP_COND.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-4-philmd@linaro.org>
Keep this handler style in sync with other handlers by
using a switch() case, which might become handy to
handle other states.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-3-philmd@linaro.org>
Fix mis-alignment from commits 793d04f495 and 6380cd2052
("Add sd_cmd_SEND_TUNING_BLOCK" and "Add sd_cmd_SET_BLOCK_COUNT").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-2-philmd@linaro.org>
The oldest model that IBM still supports is the z13. Considering
that each generation can "emulate" the previous two generations
in hardware (via the "IBC" feature of the CPUs), this means that
everything that is older than z114/196 is not an officially supported
CPU model anymore. The Linux kernel still support the z10, so if
we also take this into account, everything older than that can
definitely be considered as a legacy CPU model.
For downstream builds of QEMU, we would like to be able to disable
these legacy CPUs in the build. Thus add a CONFIG switch that can be
used to disable them (and old machine types that use them by default).
Message-Id: <20240614125019.588928-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vfio_ccw_register_irq_notifier() and vfio_ap_register_irq_notifier()
errors are currently reported using error_report_err(). Since they are
not considered as failing conditions, using warn_report_err() is more
appropriate.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-8-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When get name failed, we should call unrealize() so that
vfio_ccw_realize() is self contained.
Fixes: 909a6254ed ("vfio/ccw: Make vfio cdev pre-openable by passing a file handle")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-7-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The local error variable is kept for vfio_ccw_register_irq_notifier()
because it is not considered as a failing condition. We will change
how error reporting is done in following changes.
Remove the error_propagate() call.
Cc: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-6-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the realize() handler of S390CCWDeviceClass takes an 'Error **'
argument, best practices suggest to return a bool. See the api/error.h
Rules section. While at it, modify the call in vfio_ccw_realize().
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-5-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the 'Error **errp' argument of s390_ccw_realize() instead and
remove the error_propagate() call.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-4-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the realize() handler of CCWDeviceClass takes an 'Error **'
argument, best practices suggest to return a bool. See the api/error.h
Rules section. While at it, modify the call in s390_ccw_realize().
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-3-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since s390_ccw_get_dev_info() takes an 'Error **' argument, best
practices suggest to return a bool. See the qapi/error.h Rules
section. While at it, modify the call in s390_ccw_realize().
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-2-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Enable CPU cluster support on SbsaQemu platform, so that users can
specify a 4-level CPU hierarchy sockets/clusters/cores/threads. And
this topology can be passed to the firmware through /cpus/topology
Device Tree.
Signed-off-by: Xiong Yining <xiongyining1480@phytium.com.cn>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20240607103825.1295328-2-xiongyining1480@phytium.com.cn
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This changes the way the ohci emulation handles a Transfer Descriptor
with "Buffer End" set to "Current Buffer Pointer" - 1, specifically
in the case of a zero-length packet.
The OHCI spec 4.3.1.2 Table 4-2 specifies td.cbp to be zero for a
zero-length packet. Peter Maydell tracked down commit 1328fe0c32
(hw: usb: hcd-ohci: check len and frame_number variables) where qemu
started checking this according to the spec.
What this patch does is loosen the qemu ohci implementation to allow a
zero-length packet if td.be (Buffer End) is set to td.cbp - 1, and with a
non-zero td.cbp value.
The spec is unclear whether this is valid or not -- it is not the
clearly documented way to send a zero length TD (which is CBP=BE=0),
but it isn't specifically forbidden. Actual hw seems to be ok with it.
Does any OS rely on this behavior? There have been no reports to
qemu-devel of this problem.
This is attempting to have qemu behave like actual hardware,
but this is just a minor change.
With a tiny OS[1] that boots and executes a test, the issue can be seen:
* OS that sends USB requests to a USB mass storage device
but sends td.cbp = td.be + 1
* qemu 4.2
* qemu HEAD (4e66a0854)
* Actual OHCI controller (hardware)
Command line:
qemu-system-x86_64 -m 20 \
-device pci-ohci,id=ohci \
-drive if=none,format=raw,id=d,file=testmbr.raw \
-device usb-storage,bus=ohci.0,drive=d \
--trace "usb_*" --trace "ohci_*" -D qemu.log
Results are:
qemu 4.2 | qemu HEAD | actual HW
-----------+------------+-----------
works fine | ohci_die() | works fine
Tip: if the flags "-serial pty -serial stdio" are added to the command line
the test will output USB requests like this:
Testing qemu HEAD:
> Free mem 2M ohci port2 conn FS
> setup { 80 6 0 1 0 0 8 0 }
> ED info=80000 { mps=8 en=0 d=0 } tail=c20920
> td0 c20880 nxt=c20960 f2000000 setup cbp=c20900 be=c20907
> td1 c20960 nxt=c20980 f3140000 in cbp=c20908 be=c2090f
> td2 c20980 nxt=c20920 f3080000 out cbp=c20910 be=c2090f ohci20 host err
> usb stopped
And in qemu.log:
usb_ohci_iso_td_bad_cc_overrun ISO_TD start_offset=0x00c20910 > next_offset=0x00c2090f
Testing qemu 4.2:
> Free mem 2M ohci port2 conn FS
> setup { 80 6 0 1 0 0 8 0 }
> ED info=80000 { mps=8 en=0 d=0 } tail=620920
> td0 620880 nxt=620960 f2000000 setup cbp=620900 be=620907 cbp=0 be=620907
> td1 620960 nxt=620980 f3140000 in cbp=620908 be=62090f cbp=0 be=62090f
> td2 620980 nxt=620920 f3080000 out cbp=620910 be=62090f cbp=0 be=62090f
> rx { 12 1 0 2 0 0 0 8 }
> setup { 0 5 1 0 0 0 0 0 } tx {}
> ED info=80000 { mps=8 en=0 d=0 } tail=620880
> td0 620920 nxt=620960 f2000000 setup cbp=620900 be=620907 cbp=0 be=620907
> td1 620960 nxt=620880 f3100000 in cbp=620908 be=620907 cbp=0 be=620907
> setup { 80 6 0 1 0 0 12 0 }
> ED info=80001 { mps=8 en=0 d=1 } tail=620960
> td0 620880 nxt=6209c0 f2000000 setup cbp=620920 be=620927 cbp=0 be=620927
> td1 6209c0 nxt=6209e0 f3140000 in cbp=620928 be=620939 cbp=0 be=620939
> td2 6209e0 nxt=620960 f3080000 out cbp=62093a be=620939 cbp=0 be=620939
> rx { 12 1 0 2 0 0 0 8 f4 46 1 0 0 0 1 2 3 1 }
> setup { 80 6 0 2 0 0 0 1 }
> ED info=80001 { mps=8 en=0 d=1 } tail=620880
> td0 620960 nxt=6209a0 f2000000 setup cbp=620a20 be=620a27 cbp=0 be=620a27
> td1 6209a0 nxt=6209c0 f3140004 in cbp=620a28 be=620b27 cbp=620a48 be=620b27
> td2 6209c0 nxt=620880 f3080000 out cbp=620b28 be=620b27 cbp=0 be=620b27
> rx { 9 2 20 0 1 1 4 c0 0 9 4 0 0 2 8 6 50 0 7 5 81 2 40 0 0 7 5 2 2 40 0 0 }
> setup { 0 9 1 0 0 0 0 0 } tx {}
> ED info=80001 { mps=8 en=0 d=1 } tail=620900
> td0 620880 nxt=620940 f2000000 setup cbp=620a00 be=620a07 cbp=0 be=620a07
> td1 620940 nxt=620900 f3100000 in cbp=620a08 be=620a07 cbp=0 be=620a07
[1] The OS disk image has been emailed to philmd@linaro.org, mjt@tls.msk.ru,
and kraxel@redhat.com:
* testCbpOffBy1.img.xz
* sha256: f87baddcb86de845de12f002c698670a426affb40946025cc32694f9daa3abed
Signed-off-by: David Hubbard <dmamfmgm@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Exynos4210 RNG module requires 32-bit (4-byte) accesses to its registers.
According to the User Manual Section 25.3[1], the registers for RNG operations
are 32-bit. This change ensures that the memory region operations for the
RNG module enforce the correct access sizes, preventing invalid memory accesses.
[1] http://www.mediafire.com/view/8ly2fqls3c9c31c/Exynos_4412_SCP_Users_Manual_Ver.0.10.00_Preliminary0.pdf
Reproducer:
cat << EOF | qemu-system-aarch64 -display none \
-machine accel=qtest, -m 512M -machine smdkc210 -qtest stdio
readb 0x10830454
EOF
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-id: 20240618163701.3204975-1-zheyuma97@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Multiple warning messages and corresponding backtraces are observed when Linux
guest is booted on the host with Fujitsu CPUs. One of them is shown as below.
[ 0.032443] ------------[ cut here ]------------
[ 0.032446] uart-pl011 9000000.pl011: ARCH_DMA_MINALIGN smaller than
CTR_EL0.CWG (128 < 256)
[ 0.032454] WARNING: CPU: 0 PID: 1 at arch/arm64/mm/dma-mapping.c:54
arch_setup_dma_ops+0xbc/0xcc
[ 0.032470] Modules linked in:
[ 0.032475] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-452.el9.aarch64
[ 0.032481] Hardware name: linux,dummy-virt (DT)
[ 0.032484] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.032490] pc : arch_setup_dma_ops+0xbc/0xcc
[ 0.032496] lr : arch_setup_dma_ops+0xbc/0xcc
[ 0.032501] sp : ffff80008003b860
[ 0.032503] x29: ffff80008003b860 x28: 0000000000000000 x27: ffffaae4b949049c
[ 0.032510] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 0.032517] x23: 0000000000000100 x22: 0000000000000000 x21: 0000000000000000
[ 0.032523] x20: 0000000100000000 x19: ffff2f06c02ea400 x18: ffffffffffffffff
[ 0.032529] x17: 00000000208a5f76 x16: 000000006589dbcb x15: ffffaae4ba071c89
[ 0.032535] x14: 0000000000000000 x13: ffffaae4ba071c84 x12: 455f525443206e61
[ 0.032541] x11: 68742072656c6c61 x10: 0000000000000029 x9 : ffffaae4b7d21da4
[ 0.032547] x8 : 0000000000000029 x7 : 4c414e494d5f414d x6 : 0000000000000029
[ 0.032553] x5 : 000000000000000f x4 : ffffaae4b9617a00 x3 : 0000000000000001
[ 0.032558] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff2f06c029be40
[ 0.032564] Call trace:
[ 0.032566] arch_setup_dma_ops+0xbc/0xcc
[ 0.032572] of_dma_configure_id+0x138/0x300
[ 0.032591] amba_dma_configure+0x34/0xc0
[ 0.032600] really_probe+0x78/0x3dc
[ 0.032614] __driver_probe_device+0x108/0x160
[ 0.032619] driver_probe_device+0x44/0x114
[ 0.032624] __device_attach_driver+0xb8/0x14c
[ 0.032629] bus_for_each_drv+0x88/0xe4
[ 0.032634] __device_attach+0xb0/0x1e0
[ 0.032638] device_initial_probe+0x18/0x20
[ 0.032643] bus_probe_device+0xa8/0xb0
[ 0.032648] device_add+0x4b4/0x6c0
[ 0.032652] amba_device_try_add.part.0+0x48/0x360
[ 0.032657] amba_device_add+0x104/0x144
[ 0.032662] of_amba_device_create.isra.0+0x100/0x1c4
[ 0.032666] of_platform_bus_create+0x294/0x35c
[ 0.032669] of_platform_populate+0x5c/0x150
[ 0.032672] of_platform_default_populate_init+0xd0/0xec
[ 0.032697] do_one_initcall+0x4c/0x2e0
[ 0.032701] do_initcalls+0x100/0x13c
[ 0.032707] kernel_init_freeable+0x1c8/0x21c
[ 0.032712] kernel_init+0x28/0x140
[ 0.032731] ret_from_fork+0x10/0x20
[ 0.032735] ---[ end trace 0000000000000000 ]---
In Linux, a check is applied to every device which is exposed through
device-tree node. The warning message is raised when the device isn't
DMA coherent and the cache line size is larger than ARCH_DMA_MINALIGN
(128 bytes). The cache line is sorted from CTR_EL0[CWG], which corresponds
to 256 bytes on the guest CPUs. The DMA coherent capability is claimed
through 'dma-coherent' in their device-tree nodes or parent nodes.
This happens even when the device doesn't implement or use DMA at all,
for legacy reasons.
Fix the issue by adding 'dma-coherent' property to the device-tree root
node, meaning all devices are capable of DMA coherent by default.
This both suppresses the spurious kernel warnings and also guards
against possible future QEMU bugs where we add a DMA-capable device
and forget to mark it as dma-coherent.
Signed-off-by: Zhenyu Zhang <zhenyzha@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-id: 20240612020506.307793-1-zhenyzha@redhat.com
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For some use-cases, it is helpful to have more than one UART
available to the guest. If the second UART slot is not already used
for a TrustZone Secure-World-only UART, create it as a NonSecure UART
only when the user provides a serial backend (e.g. via a second
-serial command line option).
This avoids problems where existing guest software only expects a
single UART, and gets confused by the second UART in the DTB. The
major example of this is older EDK2 firmware, which will send the
GRUB bootloader output to UART1 and the guest serial output to UART0.
Users who want to use both UARTs with a guest setup including EDK2
are advised to update to EDK2 release edk2-stable202311 or newer.
(The prebuilt EDK2 blobs QEMU upstream provides are new enough.)
The relevant EDK2 changes are the ones described here:
https://bugzilla.tianocore.org/show_bug.cgi?id=4577
Inspired-by: Axel Heider <axel.heider@hensoldt.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-4-peter.maydell@linaro.org
We're going to make the second UART not always a secure-only device.
Rename the constants VIRT_UART and VIRT_SECURE_UART to VIRT_UART0
and VIRT_UART1 accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-3-peter.maydell@linaro.org
If there is more than one UART in the DTB, then there is no guarantee
on which order a guest is supposed to initialise them. The standard
solution to this is "serialN" entries in the "/aliases" node of the
dtb which give the nodename of the UARTs.
At the moment we only have two UARTs in the DTB when one is for
the Secure world and one for the Non-Secure world, so this isn't
really a problem. However if we want to add a second NS UART we'll
need the aliases to ensure guests pick the right one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-2-peter.maydell@linaro.org
This commit modifies the dwc2_hsotg_read() and dwc2_hsotg_write() functions
to handle invalid address access gracefully. Instead of using
g_assert_not_reached(), which causes the program to abort, the functions
now log an error message and return a default value for reads or do
nothing for writes.
This change prevents the program from aborting and provides clear log
messages indicating when an invalid memory address is accessed.
Reproducer:
cat << EOF | qemu-system-aarch64 -display none \
-machine accel=qtest, -m 512M -machine raspi2b -m 1G -nodefaults \
-usb -drive file=null-co://,if=none,format=raw,id=disk0 -device \
usb-storage,port=1,drive=disk0 -qtest stdio
readl 0x3f980dfb
EOF
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20240618135610.3109175-1-zheyuma97@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit updates the a9_gtimer_get_current_cpu() function to handle
cases where QTest is enabled. When QTest is used, it returns 0 instead
of dereferencing the current_cpu, which can be NULL. This prevents the
program from crashing during QTest runs.
Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine npcm750-evb -qtest stdio
writel 0xf03fe20c 0x26d7468c
EOF
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240618144009.3137806-1-zheyuma97@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the system bus interrupt line to CPU core assignment.
Fixes: ddcf58e044 ("hw/arm/xilinx_zynq: Support up to two CPU cores")
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610052906.4432-1-sebastian.huber@embedded-brains.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Julien reported that he has seen strange behaviour when running
Xen on QEMU using GICv2. When Xen migrates a guest's vCPU from
one pCPU to another while the vCPU is handling an interrupt, the
guest is unable to properly deactivate interrupts.
Looking at it a little closer, our GICv2 model treats
deactivation of SPI lines as if they were PPI's, i.e banked per
CPU core. The state for active interrupts should only be banked
for PPI lines, not for SPI lines.
Make deactivation of SPI lines unbanked, similar to how we
handle writes to GICD_ICACTIVER.
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-id: 20240605143044.2029444-2-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Updated firmware for QEMU CI is already in merge queue so we can move
platform to be future proof.
All supported cpus work fine with 1GHz timer frequency when firmware is
fresh enough.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20240531093729.220758-2-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Returning an uint32_t casted to a gint from g_cmp_ids causes the tx queue to
become wrongly sorted when executing g_slist_sort. Fix this by always
returning -1 or 1 from g_cmp_ids based on the ID comparison instead.
Also, if two message IDs are the same, sort them by using their index and
transmit the message at the lowest index first.
Signed-off-by: Shiva sagar Myana <Shivasagar.Myana@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240603051732.3334571-1-Shivasagar.Myana@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Boolean return value is reversed, to align with QEMU_ALLOCATED_FLAG, so
all callers must be adapted. Also rename share_surface variable in
vga_draw_graphic() to reduce confusion.
No functional change.
Suggested-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240605131444.797896-4-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In case the display surface uses a shared buffer (i.e. uses vga vram
directly instead of a shadow) go unshare the buffer before clearing it.
This avoids vga memory corruption, which in turn fixes unblanking not
working properly with X11.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2067
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240605131444.797896-2-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
s390_skeys_set() dispatch to S390SKeysClass::set_skeys(),
and s390_skeys_get() to S390SKeysClass::get_skeys().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240613104415.9643-2-philmd@linaro.org>
Wire up loongson_ipi device for loongson3_virt machine, so we
can have SMP support for TCG backend as well.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240605-loongson3-ipi-v3-3-ddd2c0e03fa3@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
cpu_by_arch_id is doing the same thing as our ipi_getcpu logic.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20240605-loongson3-ipi-v3-4-ddd2c0e03fa3@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The real IPI hardware have dedicated MMIO registers mapped into
memory address space for every core. This is not used by LoongArch
guest software but it is essential for CPU without IOCSR such as
Loongson-3A1000.
Implement it with existing infrastructure.
Acked-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-ID: <20240605-loongson3-ipi-v3-2-ddd2c0e03fa3@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
It was missed out in previous commit.
Fixes: b4a12dfc21 ("hw/intc/loongarch_ipi: Rename as loongson_ipi")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240605-loongson3-ipi-v3-1-ddd2c0e03fa3@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In order to compute the amount of free space (in bytes), the number
of available blocks (f_bavail) should be multiplied by the block
size (f_frsize) instead of the total number of blocks (f_blocks).
Signed-off-by: Fabio D'Urso <fdurso@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240618003657.3344685-1-fdurso@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since commit 99761176ee ("usb: Remove legacy -usbdevice options
(host, serial, disk and net)") hw/usb/host.h is not used, remove
it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240611102305.60735-2-philmd@linaro.org>
@event access is read-only.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20240612132532.85928-4-philmd@linaro.org>
This helper routine uses the machine definition, sockets, cores and
threads, to loop on all CPUs of the machine. Replace CPU_FOREACH()
with it.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240424093048.180966-1-clg@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is a counterpart to the HMP "info pic" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240610063518.50680-3-philmd@linaro.org>
Replace Monitor API by HumanReadableText one (see commit f2de406f29
"docs/devel: document expectations for QAPI data modelling for QMP"
for rationale).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240610063518.50680-2-philmd@linaro.org>
The VIRTIO Sound Device conforms with the Virtio spec v1.2,
thus only use little endianness.
Remove the suspicious target_words_bigendian() noticed during
code review.
Cc: qemu-stable@nongnu.org
Fixes: eb9ad377bb ("virtio-sound: handle control messages and streams")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240422211830.25606-1-philmd@linaro.org>
PCMachineClass::acpi_data_size was only used by the pc-i440fx-2.0
machine, which got removed. Since it is constant, replace the class
field by a definition (local to hw/i386/pc.c, since not used
elsewhere).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-24-philmd@linaro.org>
Last commit removed the last non-NULL use of DEFINE_I440FX_MACHINE
3rd parameter. 'compatfn' is now obsolete, remove it.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-22-philmd@linaro.org>
The pc-i440fx-2.3 machine was deprecated for the 8.2
release (see commit c7437f0ddb "docs/about: Mark the
old pc-i440fx-2.0 - 2.3 machine types as deprecated"),
time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-21-philmd@linaro.org>
PCMachineClass::rsdp_in_ram was only used by the
pc-i440fx-2.2 machine, which got removed. It is
now always true. Remove it, simplifying acpi_setup().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-19-philmd@linaro.org>
PCMachineClass::resizable_acpi_blob was only used by the
pc-i440fx-2.2 machine, which got removed. It is now always
true. Remove it, simplifying acpi_build().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-18-philmd@linaro.org>
The pc-i440fx-2.2 machine was deprecated for the 8.2
release (see commit c7437f0ddb "docs/about: Mark the
old pc-i440fx-2.0 - 2.3 machine types as deprecated"),
time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-17-philmd@linaro.org>
'legacy_align' is always NULL, remove it, simplifying
memory_device_pre_plug().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-16-philmd@linaro.org>
'legacy_align' is always NULL, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-15-philmd@linaro.org>
PCMachineClass::enforce_aligned_dimm was only used by the
pc-i440fx-2.1 machine, which got removed. It is now always
true. Remove it, simplifying pc_get_device_memory_range().
Update the comment in Avocado test_phybits_low_pse36().
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-14-philmd@linaro.org>
'uuid_encoded' is always true, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-12-philmd@linaro.org>
PCMachineClass::smbios_uuid_encoded was only used by the
pc-i440fx-2.1 machine, which got removed. It is now always
true, remove it.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-11-philmd@linaro.org>
The pc-i440fx-2.1 machine was deprecated for the 8.2
release (see commit c7437f0ddb "docs/about: Mark the
old pc-i440fx-2.0 - 2.3 machine types as deprecated"),
time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-9-philmd@linaro.org>
acpi_memory_hotplug::is_enabled is set to %true once via
ich9_lpc_initfn() -> ich9_pm_add_properties(). No need to
check it, so remove now dead code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-8-philmd@linaro.org>
No external code sets the 'memory-hotplug-support'
property, remove it.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-7-philmd@linaro.org>
PCMachineClass::legacy_acpi_table_size was only used by the
pc-i440fx-2.0 machine, which got removed. Remove it and simplify
acpi_build().
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240617071118.60464-6-philmd@linaro.org>
XHCI_FLAG_SS_FIRST was only used by the pc-i440fx-2.0 machine,
which got removed. Remove it and simplify various functions in
hcd-xhci.c.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-5-philmd@linaro.org>
XHCI_FLAG_FORCE_PCIE_ENDCAP was only used by the
pc-i440fx-2.0 machine, which got removed. Remove it
and simplify usb_xhci_pci_realize().
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-4-philmd@linaro.org>
The pc-i440fx-2.0 machine was deprecated for the 8.2
release (see commit c7437f0ddb "docs/about: Mark the
old pc-i440fx-2.0 - 2.3 machine types as deprecated"),
time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-3-philmd@linaro.org>
Similarly to the commit c7437f0ddb "docs/about: Mark the
old pc-i440fx-2.0 - 2.3 machine types as deprecated",
deprecate the 2.4 to 2.12 machines.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-2-philmd@linaro.org>
Fix the transmission return size because not all bytes could be
transmitted successfully. So, return a successful length instead of a
constant value.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Due to a description loading failure, adding a trace log makes observing
the DMA behavior easy.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Loading a description from memory may cause a bus-error. In this
case, the DMA should stop working, set the error flag, and return
the failure value.
When calling the loading a description function, it should be noticed
that the function may return a failure value. Breaking the loop in this
case is one of the possible ways to handle it.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
* scsi-disk: migrate emulated requests
* i386/sev: fix Coverity issues
* i386/tcg: more conversions to new decoder
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZv6kMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOn4Af/evnpsae1fm8may1NQmmezKiks/4X
cR0GaQ7w75Oas05jKsG7Xnrq3Vn6p5wllf3Wf00p7F1iJX18azY9rQgIsUVUgVem
/EIZk1eM6+mDxuIG0taPxc5Aw3cfIBWAjUmzsXrSr55e/wyiIxZCeUo2zk8Il+iL
Z4ceNzY5PZzc2Fl10D3cGs/+ynfiDM53ucwe3ve2T6NrxEVfKQPp5jkIUkBUba6z
zM5O4Q5KTEZYVth1gbDTB/uUJLUFjQ12kCQfRCNX+bEPDHwARr0UWr/Oxtz0jZSd
FvXohz7tI+v+ph0xHyE4tEFqryvLCII1td2ohTAYZZXNGkjK6XZildngBw==
=m4BE
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* i386: fix issue with cache topology passthrough
* scsi-disk: migrate emulated requests
* i386/sev: fix Coverity issues
* i386/tcg: more conversions to new decoder
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZv6kMUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOn4Af/evnpsae1fm8may1NQmmezKiks/4X
# cR0GaQ7w75Oas05jKsG7Xnrq3Vn6p5wllf3Wf00p7F1iJX18azY9rQgIsUVUgVem
# /EIZk1eM6+mDxuIG0taPxc5Aw3cfIBWAjUmzsXrSr55e/wyiIxZCeUo2zk8Il+iL
# Z4ceNzY5PZzc2Fl10D3cGs/+ynfiDM53ucwe3ve2T6NrxEVfKQPp5jkIUkBUba6z
# zM5O4Q5KTEZYVth1gbDTB/uUJLUFjQ12kCQfRCNX+bEPDHwARr0UWr/Oxtz0jZSd
# FvXohz7tI+v+ph0xHyE4tEFqryvLCII1td2ohTAYZZXNGkjK6XZildngBw==
# =m4BE
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 17 Jun 2024 12:48:19 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (25 commits)
target/i386: SEV: do not assume machine->cgs is SEV
target/i386: convert CMPXCHG to new decoder
target/i386: convert XADD to new decoder
target/i386: convert LZCNT/TZCNT/BSF/BSR/POPCNT to new decoder
target/i386: convert SHLD/SHRD to new decoder
target/i386: adapt gen_shift_count for SHLD/SHRD
target/i386: pull load/writeback out of gen_shiftd_rm_T1
target/i386: convert non-grouped, helper-based 2-byte opcodes
target/i386: split X86_CHECK_prot into PE and VM86 checks
target/i386: finish converting 0F AE to the new decoder
target/i386: fix bad sorting of entries in the 0F table
target/i386: replace read_crN helper with read_cr8
target/i386: convert MOV from/to CR and DR to new decoder
target/i386: fix processing of intercept 0 (read CR0)
target/i386: replace NoSeg special with NoLoadEA
target/i386: change X86_ENTRYwr to use T0, use it for moves
target/i386: change X86_ENTRYr to use T0
target/i386: put BLS* input in T1, use generic flag writeback
target/i386: rewrite flags writeback for ADCX/ADOX
target/i386: remove CPUX86State argument from generator functions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AST2700 dram size calculation is not back compatible AST2600.
According to the DDR capacity hardware behavior,
if users write the data to the address which is beyond the ram size,
it would write the data to the "address % ram_size".
For example:
a. sdram base address "0x4 00000000"
b. sdram size 1 GiB
The available address range is from "0x4 00000000" to "0x4 3FFFFFFF".
If users write 0x12345678 to address "0x5 00000000",
the value of DRAM address 0 (base address 0x4 00000000) will be 0x12345678.
Add aspeed_soc_ast2700_dram_init to calculate the dram size and add
memory I/O whose address range is from "max_ram_size - ram_size" to max_ram_size
and its read/write handler to emulate DDR capacity hardware behavior.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 CPU is ARM Cortex-A35 which is 64 bits.
Add TARGET_AARCH64 to build this machine.
According to the design of ast2700, it has a bootmcu(riscv-32) which
is used for executing SPL.
Then, CPUs(cortex-a35) execute u-boot, kernel and rofs.
Currently, qemu not support emulate two CPU architectures
at the same machine. Therefore, qemu will only support
to emulate CPU(cortex-a35) side for ast2700
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35 CPU).
AST2700 SOC and its interrupt controller are too complex to handle
in the common Aspeed SoC framework. We introduce a new ast2700
class with instance_init and realize handlers.
AST2700 is a 64 bits quad core cpus and support 8 watchdog.
Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8.
In addition, update AspeedSocState to support scuio, sli, sliio and intc.
Add TYPE_ASPEED27X0_SOC machine type.
The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting
start from u-boot stage. Set SDMC controller
unlocked by default.
In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts.
It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136.
And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to
GICINT or-gates instead of GIC device.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 interrupt controller(INTC) provides hardware interrupt interfaces
to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of
INT 128 to INT136 combines 32 interrupts.
Introduce a new aspeed_intc class with instance_init and realize handlers.
So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources
from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which
connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which
connect to GIC device with GIC IRQ 128 to 136.
If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by
OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and
set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq
callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).
Block diagram of GICINT132:
GICINT132
ETH1 +-----------+
+-------->+0 3|
ETH2 | 4|
+-------->+1 5|
ETH3 | 6|
+-------->+2 19| INTC GIC
UART0 | 20| +--------------------------+
+-------->+7 21| | | +--------------+
UART1 | 22| |orgate0 +----> output_pin0+----------->+GIC128 |
+-------->+8 23| | | | |
UART2 | 24| |orgate1 +----> output_pin1+----------->+GIC129 |
+-------->+9 25| | | | |
UART3 | 26| |orgate2 +----> output_pin2+----------->+GIC130 |
+--------->10 27| | | | |
UART5 | 28| |orgate3 +----> output_pin3+----------->+GIC131 |
+-------->+11 29| | | | |
UART6 | +----------->+orgate4 +----> output_pin4+----------->+GIC132 |
+-------->+12 30| | | | |
UART7 | 31| |orgate5 +----> output_pin5+----------->+GIC133 |
+-------->+13 | | | | |
UART8 | OR[0:31] | |orgate6 +----> output_pin6+----------->+GIC134 |
---------->14 | | | | |
UART9 | | |orgate7 +----> output_pin7+----------->+GIC135 |
--------->+15 | | | | |
UART10 | | |orgate8 +----> output_pin8+----------->+GIC136 |
--------->+16 | | | +--------------+
UART11 | | +--------------------------+
+-------->+17 |
UART12 | |
+--------->18 |
| |
| |
| |
+-----------+
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[clg: Fixed class_size in TYPE_ASPEED_INTC definition ]
AST2700 have two SCU controllers which are SCU and SCUIO.
Both SCU and SCUIO registers are not compatible previous SOCs
, introduces new registers and adds ast2700 scu, sucio class init handler.
The pclk divider selection of SCUIO is defined in SCUIO280[20:18] and
the pclk divider selection of SCU is defined in SCU280[25:23].
Both of them are not compatible AST2600 SOCs, adds a get_apb_freq function
and trace-event for AST2700 SCU and SCUIO.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[clg: Fixed spelling : Unhandeled -> Unhandled ]
AST2700 fmc/spi controller's address decoding unit is 64KB
and only bits [31:16] are used for decoding. Introduce seg_to_reg
and reg_to_seg handlers for ast2700 fmc/spi controller.
In addition, adds ast2700 fmc, spi0, spi1, and spi2 class init handler.
AST2700 is a 64 bits quad core CPUs(Cortex-a35). Introduce a new
"aspeed_2700_smc_flash_ops" and set its valid "max_access_size"
8 for 64 bits data format access.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
It set "aspeed_smc_flash_ops" struct which containing
read and write callbacks to be used when I/O is performed
on the SMC flash region. And it set the valid max_access_size 4
by default for all ASPEED SMC models.
However, the valid max_access_size 4 only support 32 bits CPUs.
To support all ASPEED SMC model, introduce a new
"const MemoryRegionOps *" attribute in AspeedSMCClass and
use it in aspeed_smc_flash_realize function.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 support the maximum dram size is 8GiB
and has a "DMA DRAM Side Address High Part(0x7C)"
register to support 64 bits dma dram address.
Add helper routines functions to compute the dma dram
address, new features and update trace-event
to support 64 bits dram address.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
DMA length is from 1 byte to 32MB for AST2600 and AST10x0
and DMA length is from 4 bytes to 32MB for AST2500.
In other words, if "R_DMA_LEN" is 0, it should move at least 1 byte
data for AST2600 and AST10x0 and 4 bytes data for AST2500.
To support all ASPEED SOCs, adds dma_start_length parameter to store
the start length, add helper routines function to compute the dma length
and update DMA_LENGTH mask to "1FFFFFF" to support dma 1 byte
length unit for AST2600 and AST1030.
Currently, only supports dma length 4 bytes aligned.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The SDRAM memory controller(DRAMC) controls the access to external
DDR4 and DDR5 SDRAM and power up to DDR4 and DDR5 PHY.
The DRAM memory controller of AST2700 is not backward compatible
to previous chips such AST2600, AST2500 and AST2400.
Max memory is now 8GiB on the AST2700. Introduce new
aspeed_2700_sdmc and class with read/write operation and
reset handlers.
Define DRAMC necessary protected registers and
unprotected registers for AST2700 and increase
the register set to 0x1000.
Add unlocked property to change controller protected status.
Incrementing the version of vmstate to 2.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Fix coding style issues from checkpatch.pl
Test command:
scripts/checkpatch.pl --no-tree -f hw/misc/aspeed_sdmc.c
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
These macros are no longer used for ASPEED SOCs, so removes them.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 SLI engine is designed to accelerate the
throughput between cross-die connections.
It have CPU_SLI at CPU die and IO_SLI at IO die.
Introduce dummy AST2700 SLI and SLIIO models.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 wdt controller is similiar to AST2600's wdt, but
the AST2700 has 8 watchdogs, and they each have 0x80 of registers.
Introduce ast2700 object class and increase the number of regs(offset) of
ast2700 model.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The Aspeed SMC device model use to have a 'sdram_base' property. It
was removed by commit d177892d4a ("aspeed/smc: Remove unused
"sdram-base" property") because previous changes simplified the DMA
transaction model to use an offset in RAM and not the physical
address.
The AST2700 SoC has larger address space (64-bit) and a new register
DMA DRAM Side Address High Part (0x7C) is introduced to deal with the
high bits of the DMA address. To be able to compute the offset of the
DMA transaction, as done on the other SoCs, we will need to know where
the DRAM is mapped in the address space. Re-introduce a "dram-base"
property to hold this value.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
add the Query Processing Library (QPL) compression method
Introduce the qpl as a new multifd migration compression method, it can
use In-Memory Analytics Accelerator(IAA) to accelerate compression and
decompression, which can not only reduce network bandwidth requirement
but also reduce host compression and decompression CPU overhead.
How to enable qpl compression during migration:
migrate_set_parameter multifd-compression qpl
There is no qpl compression level parameter added since it only supports
level one, users do not need to specify the qpl compression level.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
[fixed docs spacing in migration.json]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Trace events aren't designed to be multi-lines.
Remove the newline characters.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mads Ynddal <mads@ynddal.dk>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240606103943.79116-5-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Trace events aren't designed to be multi-lines.
Remove the newline characters.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mads Ynddal <mads@ynddal.dk>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240606103943.79116-4-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Trace events aren't designed to be multi-lines. Remove
the newline character which doesn't bring much value.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mads Ynddal <mads@ynddal.dk>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240606103943.79116-3-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For VMs configured with the USB CDROM device:
-drive file=/path/to/local/file,id=drive-usb-disk0,media=cdrom,readonly=on...
-device usb-storage,drive=drive-usb-disk0,id=usb-disk0...
QEMU process may crash after live migration, to reproduce the issue,
configure VM (Guest OS ubuntu 20.04 or 21.10) with the following XML:
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/path/to/share_fs/cdrom.iso'/>
<target dev='sda' bus='usb'/>
<readonly/>
<address type='usb' bus='0' port='2'/>
</disk>
<controller type='usb' index='0' model='piix3-uhci'/>
Do the live migration repeatedly, crash may happen after live migratoin,
trace log at the source before live migration is as follows:
324808@1711972823.521945:usb_uhci_frame_start nr 319
324808@1711972823.521978:usb_uhci_qh_load qh 0x35cb5400
324808@1711972823.521989:usb_uhci_qh_load qh 0x35cb5480
324808@1711972823.521997:usb_uhci_td_load qh 0x35cb5480, td 0x35cbe000, ctrl 0x0, token 0xffe07f69
324808@1711972823.522010:usb_uhci_td_nextqh qh 0x35cb5480, td 0x35cbe000
324808@1711972823.522022:usb_uhci_qh_load qh 0x35cb5680
324808@1711972823.522030:usb_uhci_td_load qh 0x35cb5680, td 0x75ac5180, ctrl 0x19800000, token 0x3c903e1
324808@1711972823.522045:usb_uhci_packet_add token 0x103e1, td 0x75ac5180
324808@1711972823.522056:usb_packet_state_change bus 0, port 2, ep 2, packet 0x559f9ba14b00, state undef -> setup
324808@1711972823.522079:usb_msd_cmd_submit lun 0, tag 0x472, flags 0x00000080, len 10, data-len 8
324808@1711972823.522107:scsi_req_parsed target 0 lun 0 tag 1138 command 74 dir 1 length 8
324808@1711972823.522124:scsi_req_parsed_lba target 0 lun 0 tag 1138 command 74 lba 4096
324808@1711972823.522139:scsi_req_alloc target 0 lun 0 tag 1138
324808@1711972823.522169:scsi_req_continue target 0 lun 0 tag 1138
324808@1711972823.522181:scsi_req_data target 0 lun 0 tag 1138 len 8
324808@1711972823.522194:usb_packet_state_change bus 0, port 2, ep 2, packet 0x559f9ba14b00, state setup -> complete
324808@1711972823.522209:usb_uhci_packet_complete_success token 0x103e1, td 0x75ac5180
324808@1711972823.522219:usb_uhci_packet_del token 0x103e1, td 0x75ac5180
324808@1711972823.522232:usb_uhci_td_complete qh 0x35cb5680, td 0x75ac5180
trace log at the destination after live migration is as follows:
3286206@1711972823.951646:usb_uhci_frame_start nr 320
3286206@1711972823.951663:usb_uhci_qh_load qh 0x35cb5100
3286206@1711972823.951671:usb_uhci_qh_load qh 0x35cb5480
3286206@1711972823.951680:usb_uhci_td_load qh 0x35cb5480, td 0x35cbe000, ctrl 0x1000000, token 0xffe07f69
3286206@1711972823.951693:usb_uhci_td_nextqh qh 0x35cb5480, td 0x35cbe000
3286206@1711972823.951702:usb_uhci_qh_load qh 0x35cb5700
3286206@1711972823.951709:usb_uhci_td_load qh 0x35cb5700, td 0x75ac5240, ctrl 0x39800000, token 0xe08369
3286206@1711972823.951727:usb_uhci_queue_add token 0x8369
3286206@1711972823.951735:usb_uhci_packet_add token 0x8369, td 0x75ac5240
3286206@1711972823.951746:usb_packet_state_change bus 0, port 2, ep 1, packet 0x56066b2fb5a0, state undef -> setup
3286206@1711972823.951766:usb_msd_data_in 8/8 (scsi 8)
2024-04-01 12:00:24.665+0000: shutting down, reason=crashed
The backtrace reveals the following:
Program terminated with signal SIGSEGV, Segmentation fault.
0 __memmove_sse2_unaligned_erms () at ../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:312
312 movq -8(%rsi,%rdx), %rcx
[Current thread is 1 (Thread 0x7f0a9025fc00 (LWP 3286206))]
(gdb) bt
0 __memmove_sse2_unaligned_erms () at ../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:312
1 memcpy (__len=8, __src=<optimized out>, __dest=<optimized out>) at /usr/include/bits/string_fortified.h:34
2 iov_from_buf_full (iov=<optimized out>, iov_cnt=<optimized out>, offset=<optimized out>, buf=0x0, bytes=bytes@entry=8) at ../util/iov.c:33
3 iov_from_buf (bytes=8, buf=<optimized out>, offset=<optimized out>, iov_cnt=<optimized out>, iov=<optimized out>)
at /usr/src/debug/qemu-6-6.2.0-75.7.oe1.smartx.git.40.x86_64/include/qemu/iov.h:49
4 usb_packet_copy (p=p@entry=0x56066b2fb5a0, ptr=<optimized out>, bytes=bytes@entry=8) at ../hw/usb/core.c:636
5 usb_msd_copy_data (s=s@entry=0x56066c62c770, p=p@entry=0x56066b2fb5a0) at ../hw/usb/dev-storage.c:186
6 usb_msd_handle_data (dev=0x56066c62c770, p=0x56066b2fb5a0) at ../hw/usb/dev-storage.c:496
7 usb_handle_packet (dev=0x56066c62c770, p=p@entry=0x56066b2fb5a0) at ../hw/usb/core.c:455
8 uhci_handle_td (s=s@entry=0x56066bd5f210, q=0x56066bb7fbd0, q@entry=0x0, qh_addr=qh_addr@entry=902518530, td=td@entry=0x7fffe6e788f0, td_addr=<optimized out>,
int_mask=int_mask@entry=0x7fffe6e788e4) at ../hw/usb/hcd-uhci.c:885
9 uhci_process_frame (s=s@entry=0x56066bd5f210) at ../hw/usb/hcd-uhci.c:1061
10 uhci_frame_timer (opaque=opaque@entry=0x56066bd5f210) at ../hw/usb/hcd-uhci.c:1159
11 timerlist_run_timers (timer_list=0x56066af26bd0) at ../util/qemu-timer.c:642
12 qemu_clock_run_timers (type=QEMU_CLOCK_VIRTUAL) at ../util/qemu-timer.c:656
13 qemu_clock_run_all_timers () at ../util/qemu-timer.c:738
14 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:542
15 qemu_main_loop () at ../softmmu/runstate.c:739
16 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:52
(gdb) frame 5
(gdb) p ((SCSIDiskReq *)s->req)->iov
$1 = {iov_base = 0x0, iov_len = 0}
(gdb) p/x s->req->tag
$2 = 0x472
When designing the USB mass storage device model, QEMU places SCSI disk
device as the backend of USB mass storage device. In addition, USB mass
device driver in Guest OS conforms to the "Universal Serial Bus Mass
Storage Class Bulk-Only Transport" specification in order to simulate
the transform behavior between a USB controller and a USB mass device.
The following shows the protocol hierarchy:
+----------------+
CDROM driver | scsi command | CDROM
+----------------+
+-----------------------+
USB mass | USB Mass Storage Class| USB mass
storage driver | Bulk-Only Transport | storage device
+-----------------------+
+----------------+
USB Controller | USB Protocol | USB device
+----------------+
In the USB protocol layer, between the USB controller and USB device, at
least two USB packets will be transformed when guest OS send a
read operation to USB mass storage device:
1. The CBW packet, which will be delivered to the USB device's Bulk-Out
endpoint. In order to simulate a read operation, the USB mass storage
device parses the CBW and converts it to a SCSI command, which would be
executed by CDROM(represented as SCSI disk in QEMU internally), and store
the result data of the SCSI command in a buffer.
2. The DATA-IN packet, which will be delivered from the USB device's
Bulk-In endpoint(fetched directly from the preceding buffer) to the USB
controller.
We consider UHCI to be the controller. The two packets mentioned above may
have been processed by UHCI in two separate frame entries of the Frame List
, and also described by two different TDs. Unlike the physical environment,
a virtualized environment requires the QEMU to make sure that the result
data of CBW is not lost and is delivered to the UHCI controller.
Currently, these types of SCSI requests are not migrated, so QEMU cannot
ensure the result data of the IO operation is not lost if there are
inflight emulated SCSI requests during the live migration.
Assume for the moment that the USB mass storage device is processing the
CBW and storing the result data of the read operation to a buffre, live
migration happens and moves the VM to the destination while not migrating
the result data of the read operation.
After migration, when UHCI at the destination issues a DATA-IN request to
the USB mass storage device, a crash happens because USB mass storage device
fetches the result data and get nothing.
The scenario this patch addresses is this one.
Theoretically, any device that uses the SCSI disk as a back-end would be
affected by this issue. In this case, it is the USB CDROM.
To fix it, inflight emulated SCSI request be migrated during live migration,
similar to the DMA SCSI request.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Message-ID: <878c8f093f3fc2f584b5c31cb2490d9f6a12131a.1716531409.git.yong.huang@smartx.com>
[Do not bump migration version, introduce compat property instead. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a second mapcache for grant mappings. The mapcache for
grants needs to work with XC_PAGE_SIZE granularity since
we can't map larger ranges than what has been granted to us.
Like with foreign mappings (xen_memory), machines using grants
are expected to initialize the xen_grants MR and map it
into their address-map accordingly.
CC: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Pass the ram_addr offset to xen_map_cache.
This is in preparation for adding grant mappings that need
to compute the address within the RAMBlock.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When invalidating memory ranges, if we happen to hit the first
entry in a bucket we were never unmapping it. This was harmless
for foreign mappings but now that we're looking to reuse the
mapcache for transient grant mappings, we must unmap entries
when invalidated.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Make MCACHE_BUCKET_SHIFT runtime configurable per cache instance.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* backends/hostmem: Report error on unavailable qemu_madvise() features or unaligned memory sizes
* target/i386: fixes and documentation for INHIBIT_IRQ/TF/RF and debugging
* i386/hvf: Adds support for INVTSC cpuid bit
* i386/hvf: Fixes for dirty memory tracking
* i386/hvf: Use hv_vcpu_interrupt() and hv_vcpu_run_until()
* hvf: Cleanups
* stubs: fixes for --disable-system build
* i386/kvm: support for FRED
* i386/kvm: fix MCE handling on AMD hosts
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZkF2oUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNlQf+N9y6Eh0nMEEQ69twtV8ytglTY+uX
FsogvnsXHNMVubOWmmeItM6kFXTAkR9cmFaL8dqI1Gs03xEQdQXbF1KejJZOAZVl
RQMOW8Fg2Afr+0lwqCXHvhsmZ4hr5yUkRndyucA/E9AO2uGrtgwsWGDBGaHJOZIA
lAsEMOZgKjXHZnefXjhMrvpk/QNovjEV6f1RHX3oKZjKSI5/G4IqGSmwNYToot8p
2fgs4Qti4+1gNyM2oBLq7cCMjMS61tSxOMH4uqVoIisjyckPlAFRvc+DXtKsUAAs
9AgM++pNgpB0IXv67czRUNdRoK7OI8I0ULhI4qHXi6Yg2QYAHqpQ6WL4Lg==
=RP7U
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* scsi-disk: Don't silently truncate serial number
* backends/hostmem: Report error on unavailable qemu_madvise() features or unaligned memory sizes
* target/i386: fixes and documentation for INHIBIT_IRQ/TF/RF and debugging
* i386/hvf: Adds support for INVTSC cpuid bit
* i386/hvf: Fixes for dirty memory tracking
* i386/hvf: Use hv_vcpu_interrupt() and hv_vcpu_run_until()
* hvf: Cleanups
* stubs: fixes for --disable-system build
* i386/kvm: support for FRED
* i386/kvm: fix MCE handling on AMD hosts
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZkF2oUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNlQf+N9y6Eh0nMEEQ69twtV8ytglTY+uX
# FsogvnsXHNMVubOWmmeItM6kFXTAkR9cmFaL8dqI1Gs03xEQdQXbF1KejJZOAZVl
# RQMOW8Fg2Afr+0lwqCXHvhsmZ4hr5yUkRndyucA/E9AO2uGrtgwsWGDBGaHJOZIA
# lAsEMOZgKjXHZnefXjhMrvpk/QNovjEV6f1RHX3oKZjKSI5/G4IqGSmwNYToot8p
# 2fgs4Qti4+1gNyM2oBLq7cCMjMS61tSxOMH4uqVoIisjyckPlAFRvc+DXtKsUAAs
# 9AgM++pNgpB0IXv67czRUNdRoK7OI8I0ULhI4qHXi6Yg2QYAHqpQ6WL4Lg==
# =RP7U
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 08 Jun 2024 01:33:46 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (42 commits)
python: mkvenv: remove ensure command
Revert "python: use vendored tomli"
i386: Add support for overflow recovery
i386: Add support for SUCCOR feature
i386: Fix MCE support for AMD hosts
docs: i386: pc: Avoid mentioning limit of maximum vCPUs
target/i386: Add get/set/migrate support for FRED MSRs
target/i386: enumerate VMX nested-exception support
vmxcap: add support for VMX FRED controls
target/i386: mark CR4.FRED not reserved
target/i386: add support for FRED in CPUID enumeration
hvf: Makes assert_hvf_ok report failed expression
i386/hvf: Updates API usage to use modern vCPU run function
i386/hvf: In kick_vcpu use hv_vcpu_interrupt to force exit
i386/hvf: Fixes dirty memory tracking by page granularity RX->RWX change
hvf: Consistent types for vCPU handles
i386/hvf: Fixes some compilation warnings
i386/hvf: Adds support for INVTSC cpuid bit
stubs/meson: Fix qemuutil build when --disable-system
scsi-disk: Don't silently truncate serial number
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Before this commit, scsi-disk accepts a string of arbitrary length for
its "serial" property. However, the value visible on the guest is
actually truncated to 36 characters. This limitation doesn't come from
the SCSI specification, it is an arbitrary limit that was initially
picked as 20 and later bumped to 36 by commit 48b62063.
Similarly, device_id was introduced as a copy of the serial number,
limited to 20 characters, but commit 48b62063 forgot to actually bump
it.
As long as we silently truncate the given string, extending the limit is
actually not a harmless change, but break the guest ABI. This is the
most important reason why commit 48b62063 was really wrong (and it's
also why we can't change device_id to be in sync with the serial number
again and use 36 characters now, it would be another guest ABI
breakage).
In order to avoid future breakage, don't silently truncate the serial
number string any more, but just error out if it would be truncated.
Buglink: https://issues.redhat.com/browse/RHEL-3542
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240604161755.63448-1-kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Detect early unsupported MADV_MERGEABLE and MADV_DONTDUMP, and print a clearer
error message that points to the deficiency of the host.
Cc: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Otherwise, starting any guest on a non-Linux guests results in
qemu-system-arm: Couldn't set property 'merge' on 'memory-backend-ram': Invalid argument
Cc: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a new board attribute 'v-eiointc'.
A value of true enables the virt extended I/O interrupt controller.
VMs working in kvm mode have 'v-eiointc' enabled by default.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-4-gaosong@loongson.cn>
Use MemTxAttrs interface read_with_attrs/write_with_attrs
for virt_iocsr_misc_ops.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-3-gaosong@loongson.cn>
Add loongarch virt machine to the graph. It is a modified copy of
the existing riscv virtmachine in riscv-virt-machine.c
It contains a generic-pcihost controller, and an extra function
loongarch_config_qpci_bus() to configure GPEX pci host controller
information, such as ecam and pio_base addresses.
Also hotplug handle checking about TYPE_VIRTIO_IOMMU_PCI device is
added on loongarch virt machine, since virtio_mmu_pci device requires
it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240528082053.938564-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1.
Using qemu_hexdump_line both fixes the deprecation warning and
simplifies the code base.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240412073346.458116-11-richard.henderson@linaro.org>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1.
Using qemu_hexdump_line both fixes the deprecation warning and
simplifies the code base.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240412073346.458116-10-richard.henderson@linaro.org>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1.
Using qemu_hexdump_line both fixes the deprecation warning and
simplifies the code base.
Note that this drops the "0x" prefix to every byte, which should
be of no consequence to tracing.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240412073346.458116-9-richard.henderson@linaro.org>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1.
Extract common code from reinitialize_rng_seed and load_kernel
to rng_seed_hex_new. Using qemu_hexdump_line both fixes the
deprecation warning and simplifies the code base.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use qemu_hexdump_line.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240412073346.458116-7-richard.henderson@linaro.org>
Generalize the current 1 byte unit and 4 byte blocking
within the output.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240412073346.458116-5-richard.henderson@linaro.org>
Allocate a new, or append to an existing GString instead of
using a fixed sized buffer. Require the caller to determine
the length of the line -- do not bound len here.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240412073346.458116-4-richard.henderson@linaro.org>
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
=qQeP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* virtio-blk: remove SCSI passthrough functionality
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
# b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
# 49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
# Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
# eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
# llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
# =qQeP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 02:01:10 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
hw/i386: Add support for loading BIOS using guest_memfd
hw/i386/sev: Use guest_memfd for legacy ROMs
memory: Introduce memory_region_init_ram_guest_memfd()
i386/sev: Allow measured direct kernel boot on SNP
i386/sev: Reorder struct declarations
i386/sev: Extract build_kernel_loader_hashes
i386/sev: Enable KVM_HC_MAP_GPA_RANGE hcall for SNP guests
i386/kvm: Add KVM_EXIT_HYPERCALL handling for KVM_HC_MAP_GPA_RANGE
i386/sev: Invoke launch_updata_data() for SNP class
i386/sev: Invoke launch_updata_data() for SEV class
hw/i386/sev: Add support to encrypt BIOS when SEV-SNP is enabled
i386/sev: Add support for SNP CPUID validation
i386/sev: Add support for populating OVMF metadata pages
hw/i386/sev: Add function to get SEV metadata from OVMF header
i386/sev: Set CPU state to protected once SNP guest payload is finalized
i386/sev: Add handling to encrypt/finalize guest launch data
i386/sev: Add the SNP launch start context
i386/sev: Update query-sev QAPI format to handle SEV-SNP
i386/sev: Add a class method to determine KVM VM type for SNP guests
i386/sev: Don't return launch measurements for SEV-SNP guests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When guest_memfd is enabled, the BIOS is generally part of the initial
encrypted guest image and will be accessed as private guest memory. Add
the necessary changes to set up the associated RAM region with a
guest_memfd backend to allow for this.
Current support centers around using -bios to load the BIOS data.
Support for loading the BIOS via pflash requires additional enablement
since those interfaces rely on the use of ROM memory regions which make
use of the KVM_MEM_READONLY memslot flag, which is not supported for
guest_memfd-backed memslots.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-29-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current SNP guest kernels will attempt to access these regions with
with C-bit set, so guest_memfd is needed to handle that. Otherwise,
kvm_convert_memory() will fail when the guest kernel tries to access it
and QEMU attempts to call KVM_SET_MEMORY_ATTRIBUTES to set these ranges
to private.
Whether guests should actually try to access ROM regions in this way (or
need to deal with legacy ROM regions at all), is a separate issue to be
addressed on kernel side, but current SNP guest kernels will exhibit
this behavior and so this handling is needed to allow QEMU to continue
running existing SNP guest kernels.
Signed-off-by: Michael Roth <michael.roth@amd.com>
[pankaj: Added sev_snp_enabled() check]
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-28-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As with SEV, an SNP guest requires that the BIOS be part of the initial
encrypted/measured guest payload. Extend sev_encrypt_flash() to handle
the SNP case and plumb through the GPA of the BIOS location since this
is needed for SNP.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-25-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A recent version of OVMF expanded the reset vector GUID list to add
SEV-specific metadata GUID. The SEV metadata describes the reserved
memory regions such as the secrets and CPUID page used during the SEV-SNP
guest launch.
The pc_system_get_ovmf_sev_metadata_ptr() is used to retieve the SEV
metadata pointer from the OVMF GUID list.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-19-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ask the ConfidentialGuestSupport object whether to use guest_memfd
for KVM-backend private memory. This bool can be set in instance_init
(or user_complete) so that it is available when the machine is created.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux has <misc/pvpanic.h>, not <linux/pvpanic.h>. Use the same
directory for QEMU's include/standard-headers/ copy.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The legacy SCSI passthrough functionality has never been enabled for
VIRTIO 1.0 and was deprecated more than four years ago.
Get rid of it---almost, because QEMU is advertising it unconditionally
for legacy virtio-blk devices. Just parse the header and return a
nonzero status.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmZewo4ACgkQ7wSWWzmN
YhHhxgf/ZaECxru4fP8wi34XdSG/PR+BF+W5M9gZIRGrHg3vIf3/LRTpZTDccbRN
Qpwtypr9O6/AWG9Os80rn7alsmMDxN8PDDNLa9T3wf5pJUQSyQ87Yy0MiuTNPSKD
HKYUIfIlbFCM5WUW4huMmg98gKTgnzZMqOoRyMFZitbkR59qCm+Exws4HtXvCH68
3k4lgvnFccmzO9iIzaOUIPs+Yf04Kw/FrY0Q/6nypvqbF2W80Md6w02JMQuTLwdF
Guxeg/n6g0NLvCBbkjiM2VWfTaWJYbwFSwRTAMxM/geqh7qAgGsmD0N5lPlgqRDy
uAy2GvFyrwzcD0lYqf0/fRK0Go0HPA==
=J70K
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmZewo4ACgkQ7wSWWzmN
# YhHhxgf/ZaECxru4fP8wi34XdSG/PR+BF+W5M9gZIRGrHg3vIf3/LRTpZTDccbRN
# Qpwtypr9O6/AWG9Os80rn7alsmMDxN8PDDNLa9T3wf5pJUQSyQ87Yy0MiuTNPSKD
# HKYUIfIlbFCM5WUW4huMmg98gKTgnzZMqOoRyMFZitbkR59qCm+Exws4HtXvCH68
# 3k4lgvnFccmzO9iIzaOUIPs+Yf04Kw/FrY0Q/6nypvqbF2W80Md6w02JMQuTLwdF
# Guxeg/n6g0NLvCBbkjiM2VWfTaWJYbwFSwRTAMxM/geqh7qAgGsmD0N5lPlgqRDy
# uAy2GvFyrwzcD0lYqf0/fRK0Go0HPA==
# =J70K
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 04 Jun 2024 02:30:22 AM CDT
# gpg: using RSA key 215D46F48246689EC77F3562EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
ebpf: Added traces back. Changed source set for eBPF to 'system'.
virtio-net: drop too short packets early
ebpf: Add a separate target for skeleton
ebpf: Refactor tun_rss_steering_prog()
ebpf: Return 0 when configuration fails
ebpf: Fix RSS error handling
virtio-net: Do not write hashes to peer buffer
virtio-net: Always set populate_hash
virtio-net: Unify the logic to update NIC state for RSS
virtio-net: Disable RSS on reset
virtio-net: Shrink header byte swapping buffer
virtio-net: Copy header only when necessary
virtio-net: Add only one queue pair when realizing
virtio-net: Do not propagate ebpf-rss-fds errors
tap: Shrink zeroed virtio-net header
tap: Call tap_receive_iov() from tap_receive()
net: Remove receive_raw()
net: Move virtio-net header length assertion
tap: Remove qemu_using_vnet_hdr()
tap: Remove tap_probe_vnet_hdr_len()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The MEM_UNPLUG_ERROR event is deprecated since commit d43f1670c7
("qapi/qdev.json: add DEVICE_UNPLUG_GUEST_ERROR QAPI event"),
time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240530071548.20074-2-philmd@linaro.org>
In fdf029762f we factored out the handling of reading and writing
DMA descriptors from guest memory. Unfortunately we accidentally
made the descriptor-read read the descriptor into the address of the
buffer rather than into the buffer, because we didn't notice we
needed to update the arguments to the dma_memory_read() call. Before
the refactoring, "&desc" is the address of a local struct DPDMADescriptor
variable in xlnx_dpdma_start_operation(), which is the correct target
for the guest-memory-read. But after the refactoring 'desc' is the
"DPDMADescriptor *desc" argument to the new function, and so it is
already an address.
This bug is an overrun of a stack variable, since a pointer is at
most 8 bytes long and we try to read 64 bytes, as well as being
incorrect behaviour.
Pass 'desc' rather than '&desc' as the dma_memory_read() argument
to fix this.
(The same bug is not present in xlnx_dpdma_write_descriptor(),
because there we are writing the descriptor from a local struct
variable "DPDMADescriptor tmp_desc" and so passing &tmp_desc to
dma_memory_write() is correct.)
Spotted by Coverity: CID 1546649
Fixes: fdf029762f ("xlnx_dpdma: fix descriptor endianness bug")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240531124628.476938-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Directly calling exit() prevents any kind of management or handling.
Instead use the corresponding runstate API.
The default behavior of the runstate API is the same as exit().
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240523-debugexit-v1-1-d52fcaf7bf8b@t-8ch.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Align the framebuffer backend with the other legacy ones,
register it via xen_backend_init() when '-vga xenfb' is
used. It is safe because MODULE_INIT_XEN_BACKEND is called
in xen_bus_realize(), long after CLI processing initialized
the vga_interface_type variable.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-8-philmd@linaro.org>
Keep XenDevOps structures in .rodata.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-5-philmd@linaro.org>
XenDevOps @ops is not updated, mark it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-4-philmd@linaro.org>
XenDevOps @ops is not updated, mark it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-3-philmd@linaro.org>
Add xen_mr_is_memory() to abstract away tests for the
xen_memory MR.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240529140739.1387692-4-edgar.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Originally I tried to move where vCPU thread initialisation to later
in realize. However pulling that thread (sic) got gnarly really
quickly. It turns out some steps of CPU realization need values that
can only be determined from the running vCPU thread.
However having moved enough out of the thread creation we can now
queue work before the thread starts (at least for TCG guests) and
avoid the race between vcpu_init and other vcpu states a plugin might
subscribe to.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240530194250.1801701-6-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Aside from the round robin threads this is all common code. By
moving the halt_cond setup we also no longer need hacks to work around
the race between QOM object creation and thread creation.
It is a little ugly to free stuff up for the round robin thread but
better it deal with its own specialises than making the other
accelerators jump through hoops.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240530194250.1801701-3-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Split out asciidump_line as a separate function, local to hexdump.c,
for use by qemu_hexdump. Use "%-*s" to generate the alignment
between the hex and the ascii, rather than explicit spaces.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240412073346.458116-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Require that the caller output the offset and increment bufptr.
Use QEMU_HEXDUMP_LINE_BYTES in vhost_vdpa_dump_config instead
of raw integer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240412073346.458116-2-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reproducer from https://gitlab.com/qemu-project/qemu/-/issues/1451
creates small packet (1 segment, len = 10 == n->guest_hdr_len),
then destroys queue.
"if (n->host_hdr_len != n->guest_hdr_len)" is triggered, if body creates
zero length/zero segment packet as there is nothing after guest header.
qemu_sendv_packet_async() tries to send it.
slirp discards it because it is smaller than Ethernet header,
but returns 0 because tx hooks are supposed to return total length of data.
0 is propagated upwards and is interpreted as "packet has been sent"
which is terrible because queue is being destroyed, nobody is waiting for TX
to complete and assert it triggered.
Fix is discard such empty packets instead of sending them.
Length 1 packets will go via different codepath:
virtqueue_push(q->tx_vq, elem, 0);
virtio_notify(vdev, q->tx_vq);
g_free(elem);
and aren't problematic.
Signed-off-by: Alexey Dobriyan <adobriyan@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The peer buffer is qualified with const and not meant to be modified.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The member is not cleared during reset so may have a stale value.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The code to attach or detach the eBPF program to RSS were duplicated so
unify them into one function to save some code.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
RSS is disabled by default.
Fixes: 590790297c ("virtio-net: implement RSS configuration command")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Byte swapping is only performed for the part of header shared with the
legacy standard and the buffer only needs to cover it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The copied header is only used for byte swapping.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Multiqueue usage is not negotiated yet when realizing. If more than
one queue is added and the guest never requests to enable multiqueue,
the extra queues will not be deleted when unrealizing and leak.
Fixes: f9d6dbf0bf ("virtio-net: remove virtio queues if the guest doesn't support multiqueue")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Propagating ebpf-rss-fds errors has several problems.
First, it makes device realization fail and disables the fallback to the
conventional eBPF loading.
Second, it leaks memory by making device realization fail without
freeing memory already allocated.
Third, the convention is to set an error when a function returns false,
but virtio_net_load_ebpf_fds() and virtio_net_load_ebpf() returns false
without setting an error, which is confusing.
Remove the propagation to fix these problems.
Fixes: 0524ea0510 ("ebpf: Added eBPF initialization by fds.")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since qemu_set_vnet_hdr_len() is always called when
qemu_using_vnet_hdr() is called, we can merge them and save some code.
For consistency, express that the virtio-net header is not in use by
returning 0 with qemu_get_vnet_hdr_len() instead of having a dedicated
function, qemu_get_using_vnet_hdr().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* APLICs add child earlier than realize
* Fix exposure of Zkr
* Raise exceptions on wrs.nto
* Implement SBI debug console (DBCN) calls for KVM
* Support 64-bit addresses for initrd
* Change RISCV_EXCP_SEMIHOST exception number to 63
* Tolerate KVM disable ext errors
* Set tval in breakpoints
* Add support for Zve32x extension
* Add support for Zve64x extension
* Relax vector register check in RISCV gdbstub
* Fix the element agnostic Vector function problem
* Fix Zvkb extension config
* Implement dynamic establishment of custom decoder
* Add th.sxstatus CSR emulation
* Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
* Check single width operator for vector fp widen instructions
* Check single width operator for vfncvt.rod.f.f.w
* Remove redudant SEW checking for vector fp narrow/widen instructions
* Prioritize pmp errors in raise_mmu_exception()
* Do not set mtval2 for non guest-page faults
* Remove experimental prefix from "B" extension
* Fixup CBO extension register calculation
* Fix the hart bit setting of AIA
* Fix reg_width in ricsv_gen_dynamic_vector_feature()
* Decode all of the pmpcfg and pmpaddr CSRs
-----BEGIN PGP SIGNATURE-----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=mtVb
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240603' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.1
* APLICs add child earlier than realize
* Fix exposure of Zkr
* Raise exceptions on wrs.nto
* Implement SBI debug console (DBCN) calls for KVM
* Support 64-bit addresses for initrd
* Change RISCV_EXCP_SEMIHOST exception number to 63
* Tolerate KVM disable ext errors
* Set tval in breakpoints
* Add support for Zve32x extension
* Add support for Zve64x extension
* Relax vector register check in RISCV gdbstub
* Fix the element agnostic Vector function problem
* Fix Zvkb extension config
* Implement dynamic establishment of custom decoder
* Add th.sxstatus CSR emulation
* Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
* Check single width operator for vector fp widen instructions
* Check single width operator for vfncvt.rod.f.f.w
* Remove redudant SEW checking for vector fp narrow/widen instructions
* Prioritize pmp errors in raise_mmu_exception()
* Do not set mtval2 for non guest-page faults
* Remove experimental prefix from "B" extension
* Fixup CBO extension register calculation
* Fix the hart bit setting of AIA
* Fix reg_width in ricsv_gen_dynamic_vector_feature()
* Decode all of the pmpcfg and pmpaddr CSRs
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmZdVzcACgkQr3yVEwxT
# gBPxSBAAsuzhDCbaOl9jXhIL6Q0IDHULz4U16AZypHYID7T6rDaNoRmNVdqBKZuM
# IMby8qm5XFmcUGM9itcM7IKV2BNHuWSye3/Y7GOYZQyToR7U6lvLpAm4pNj4AgTC
# PLV2VPt1XLZRSthkgwp6ylBXzdNSiZMWggqTb7QbyfR5hJfG+VsZjTGaIwyZbtKI
# +CJG6gZSPv6JGNtwnJq+v0VBEkj1ryo/gg2EAAzA+EWU4nw5mJCLWoDLrYZalTv9
# vCTqJuMViTjeHqAm/IIMoFzYR94+ug0usqcmnx/E7ALTOsmBh5K+KWndAW4vqAlP
# mZOONfr3h7zc81jThC961kjGVPiTjTGbHHlKwlB2JEggwctcVqGRyWeM9wHSUr2W
# S6F56hpForzVW9IkCt/fDUxamr23303s5miIsronrwiihqkNpxKYAuqPTXFGkFKg
# ilBLGcbHcWxNmjpfIEXnTjDB6qFEceWqbjJejrsKusoSPkKQm0ktIZZUwCbTsu45
# 0ScYrBieUPjDWDFYlmWrr5byekyCXCzfpBgq8qo60FA+aP29Nx+GlFR0eWTXXY4V
# O5/WTKjQM4+/uNYIuFDCFPV1Ja5GERDhXoNkjkY5ErsSZL2c2UEp3UTxzbEl5dOm
# NRH7C26Z/xVMDwT08kDDq0t8Rkz4836txPO7y+aPbtvGfENRI8E=
# =mtVb
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 03 Jun 2024 12:40:07 AM CDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240603' of https://github.com/alistair23/qemu: (27 commits)
disas/riscv: Decode all of the pmpcfg and pmpaddr CSRs
riscv, gdbstub.c: fix reg_width in ricsv_gen_dynamic_vector_feature()
target/riscv/kvm.c: Fix the hart bit setting of AIA
target/riscv: rvzicbo: Fixup CBO extension register calculation
target/riscv: Remove experimental prefix from "B" extension
target/riscv: do not set mtval2 for non guest-page faults
target/riscv: prioritize pmp errors in raise_mmu_exception()
target/riscv: rvv: Remove redudant SEW checking for vector fp narrow/widen instructions
target/riscv: rvv: Check single width operator for vfncvt.rod.f.f.w
target/riscv: rvv: Check single width operator for vector fp widen instructions
target/riscv: rvv: Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
riscv: thead: Add th.sxstatus CSR emulation
target/riscv: Implement dynamic establishment of custom decoder
target/riscv/cpu.c: fix Zvkb extension config
target/riscv: Fix the element agnostic function problem
target/riscv: Relax vector register check in RISCV gdbstub
target/riscv: Add support for Zve64x extension
target/riscv: Add support for Zve32x extension
trans_privileged.c.inc: set (m|s)tval on ebreak breakpoint
target/riscv/debug: set tval=pc in breakpoint exceptions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch adds support for MCQ defined in UFSHCI 4.0. This patch
utilized the legacy I/O codes as much as possible to support MCQ.
MCQ operation & runtime register is placed at 0x1000 offset of UFSHCI
register statically with no spare space among four registers (48B):
UfsMcqSqReg, UfsMcqSqIntReg, UfsMcqCqReg, UfsMcqCqIntReg
The maxinum number of queue is 32 as per spec, and the default
MAC(Multiple Active Commands) are 32 in the device.
Example:
-device ufs,serial=foo,id=ufs0,mcq=true,mcq-maxq=8
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-Id: <20240528023106.856777-3-minwoo.im@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Use qemu_fdt_setprop_u64() instead of qemu_fdt_setprop_cell()
to set the address of initrd in FDT to support 64-bit address.
Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <tencent_A4482251DD0890F312758FA6B33F60815609@qq.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since only root APLICs can have hw IRQ lines, aplic->parent should
be initialized first.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: yang.zhang <yang.zhang@hexintek.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240409014445.278-1-gaoshanliukou@163.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
