Commit Graph

3791 Commits

Author SHA1 Message Date
Markus Armbruster
18846dee1a block: Catch attempt to attach multiple devices to a blockdev
For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo
happily creates two SCSI disks connected to the same block device.
It's all downhill from there.

Device usb-storage deliberately attaches twice to the same blockdev,
which fails with the fix in place.  Detach before the second attach
there.

Also catch attempt to delete while a guest device model is attached.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00
Markus Armbruster
f8b6cc0070 qdev: Decouple qdev_prop_drive from DriveInfo
Make the property point to BlockDriverState, cutting out the DriveInfo
middleman.  This prepares the ground for block devices that don't have
a DriveInfo.

Currently all user-defined ones have a DriveInfo, because the only way
to define one is -drive & friends (they go through drive_init()).
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device.  I'm
working towards a new way to define block devices, with clean
host/guest separation, and I need to get DriveInfo out of the way for
that.

Fortunately, the device models are perfectly happy with
BlockDriverState, except for two places: ide_drive_initfn() and
scsi_disk_initfn() need to check the DriveInfo for a serial number set
with legacy -drive serial=...  Use drive_get_by_blockdev() there.

Device model code should now use DriveInfo only when explicitly
dealing with drives defined the old way, i.e. without -device.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00
Markus Armbruster
14bafc5407 blockdev: Clean up automatic drive deletion
We automatically delete blockdev host parts on unplug of the guest
device.  Too much magic, but we can't change that now.

The delete happens early in the guest device teardown, before the
connection to the host part is severed.  Thus, the guest part's
pointer to the host part dangles for a brief time.  No actual harm
comes from this, but we'll catch such dangling pointers a few commits
down the road.  Clean up the dangling pointers by delaying the
automatic deletion until the guest part's pointer is gone.

Device usb-storage deliberately makes two qdev properties refer to the
same drive, because it automatically creates a second device.  Again,
too much magic we can't change now.  Multiple references worked okay
before, but now free_drive() dies for the second one.  Zap the extra
reference.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:01 +02:00
Markus Armbruster
fa12fbbece ide: Make it explicit that ide_create_drive() can't fail
All callers of ide_create_drive() ignore its value.  Currently
harmless, because it fails only when qdev_init() fails, which fails
only when ide_drive_initfn() fails, which never fails.

Brittle.  Change it to die instead of silently ignoring failure.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:01 +02:00
Markus Armbruster
fa66b909f3 scsi: scsi_bus_legacy_handle_cmdline() can fail, fix callers
None of its callers checks for failure.  scsi_hot_add() can crash
because of that:

(qemu) drive_add 4 if=scsi,format=host_device,file=/dev/sg1
scsi-generic: scsi generic interface too old
Segmentation fault (core dumped)

Fix all callers, not just scsi_hot_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:01 +02:00
Kevin Wolf
449041d4db qdev-properties: Fix (u)intXX parsers
scanf calls must not use PRI constants, they have probably the wrong size and
corrupt memory. We could replace them by SCN ones, but strtol is simpler than
scanf here anyway. While at it, also fix the parsers to reject garbage after
the number ("4096xyz" was accepted before).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Richard Henderson <rth@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 22:58:55 +02:00
TeLeMan
6881dd5f19 usb-uhci: fix commit 8e65b7c049 for vmstate
The commit 8e65b7c049 introduced
expire_time of UHCIState. But expire_time is not in vmstate, the
second uhci_frame_timer will not be fired immediately after loadvm.

Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:43:54 +02:00
cmchao
c1ff227b91 hw/omap : make local function static and remove declaration from header
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:38 +02:00
cmchao
02d7434111 hw/omap1.c : separate uart module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao
2c1d9ecb22 hw/omwp2.c : separate l4 interconnect module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao
cc9577cfb7 hw/omap2.c : separate tap module(Test-Chip-level)
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao
2d08cc7c3f hw/omap2.c : separate spi module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao
7f132a21fc hw/omap1.c : separate interrupt controller module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao
0bf4301600 hw/omap2.c : separate sdrc (sdram controller)
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao
f3354b0e5d hw/omap2.c : separate gpmc(general purpose memory controller)
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao
011d87d033 hw/omap2.c : separate synctimer module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao
c58d37cfdc hw/omap2.c : separate gptimer module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao
d82310f759 hw/omap2.c : separate gpio module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao
e5c6b25a14 hw/omap1.c : separate gpio module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:35 +02:00
Markus Armbruster
f83ccb3eab virtio-serial: Simplify virtio_serial_load()
For all i, ports_map[i] is used in and only in the i-th iteration.
Replace the dynamic array by a scalar variable.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:38:58 +02:00
Markus Armbruster
81bf96d3d2 usb-serial: Fail instead of crash when chardev is missing
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:35:46 +02:00
Aurelien Jarno
33dd298323 MIPS: fix fulong bios loading
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 19:39:45 +02:00
Aurelien Jarno
45e7e4bc75 r2d: fix pflash mapping
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:26:34 +02:00
Paolo Bonzini
d1d74664ea lsi53c895a: fix Phase Mismatch Jump
lsi_bad_phase has a bug in the choice of pmjad1/pmjad2.  This does
not matter with Linux guests because it uses just one routine for
both, but it breaks Windows 64-bit guests.  This is the text
from the spec:

   "[The PMJCTL] bit controls which decision mechanism is used
   when jumping on phase mismatch. When this bit is cleared the
   LSI53C895A will use Phase Mismatch Jump Address 1 (PMJAD1) when
   the WSR bit is cleared and Phase Mismatch Jump Address 2 (PMJAD2)
   when the WSR bit is set.  When this bit is set the LSI53C895A will
   use jump address one (PMJAD1) on data out (data out, command,
   message out) transfers and jump address two (PMJAD2) on data in
   (data in, status, message in) transfers."

Which means:

    CCNTL0.PMJCTL
        0              SCNTL2.WSR = 0             PMJAD1
        0              SCNTL2.WSR = 1             PMJAD2
        1                    out                  PMJAD1
        1                    in                   PMJAD2

In qemu, what you get instead is:

    CCNTL0.PMJCTL
        0                    out                  PMJAD1
        0                    in                   PMJAD2    <<<<<
        1                    out                  PMJAD1
        1                    in                   PMJAD1    <<<<<

Considering that qemu always has SCNTL2.WSR cleared, the two marked cases
(corresponding to phase mismatch on input) are always jumping to the
wrong PMJAD register.  The patch implements the correct semantics.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:52 +02:00
Huacai Chen
051c190bce MIPS: Initial support of fulong mini pc (machine construction)
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:52 +02:00
Huacai Chen
30235a54dc MIPS: Initial support of VIA USB controller used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:52 +02:00
Huacai Chen
016512f3d4 MIPS: Initial support of VIA IDE controller used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:52 +02:00
Huacai Chen
edf79e66c0 Initial support of vt82686b south bridge used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:51 +02:00
Huacai Chen
d0f7453d13 MIPS: Initial support of bonito north bridge used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:51 +02:00
Jan Kiszka
427bd8d694 x86: Clean up CPU reset
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-27 19:08:34 +03:00
Artyom Tarasenko
94c5f455d3 mask all interrupts when MASTER_DISABLE is set
The MASTER_DISABLE bit (aka mask-all) masks all the interrupts.

According to Sun-4M System Architecture
"The level–15 interrupt sources [...] are maskable with the Interrupt Target
Mask Register. While these interrupts are considered ’non–maskable’ within
the SPARC IU, a mask capability is provided to allow the boot firmware
to establish a basic environment before receiving any level–15 interrupts,
which are non–maskable within SPARC. A mask–all bit is provided to allow
disabling of all external interrupts during change of the CIT."

Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-27 19:06:44 +03:00
Blue Swirl
3a5c16fcb8 fw_cfg: convert to qdev
Convert fw_cfg to qdev.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-27 16:04:55 +00:00
Blue Swirl
738012bec4 Remove useless device dependency of HAS_AUDIO
System architecture dictates whether HAS_AUDIO is defined. It's then
useless to check for HAS_AUDIO in files which are only used on those
architectures which always have audio.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-27 16:04:31 +00:00
Alex Williamson
8a91110738 virtio-pci: fix bus master bug setting on load
The comment suggests we're checking for the driver in the ready
state and bus master disabled, but the code is checking that it's
not in the ready state.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Found-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:51 -05:00
Venkateswararao Jujjuri (JV)
63729c3692 virtio-9p: Implement Security model for mksock using mknod.
This patch uses mknod to create socket.

On Host/Fileserver:
-rw-------. 1 virfsuid virtfsgid 0 2010-05-11 09:57 asocket1

On Guest/Client:
srwxr-xr-x 1 guestuser guestuser 0 2010-05-11 12:57 asocket1

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:51 -05:00
Venkateswararao Jujjuri (JV)
1c29331248 virtio-9p: Implement Security model for mknod
Mapped mode stores extended attributes in the user space of the extended
attributes. Given that the user space extended attributes are available
to regular files only, special files are created as regular files on the
fileserver and appropriate mode bits are added to the extended attributes.
This method presents all special files and symlinks as regular files on the
fileserver while they are represented as special files on the guest mount.

On Host/Fileserver:
-rw-------. 1 virfsuid virtfsgid 0 2010-05-11 09:36 afifo
-rw-------. 1 virfsuid virtfsgid 0 2010-05-11 09:32 blkdev
-rw-------. 1 virfsuid virtfsgid 0 2010-05-11 09:33 chardev

On Guest/Client:
prw-r--r-- 1 guestuser guestuser 0 2010-05-11 12:36 afifo
brw-r--r-- 1 guestuser guestuser 0, 0 2010-05-11 12:32 blkdev
crw-r--r-- 1 guestuser guestuser 4, 5 2010-05-11 12:33 chardev

In the passthrough securit model, specifal files are directly created
on the fileserver. But the user credential

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:51 -05:00
Venkateswararao Jujjuri (JV)
879c28133d virtio-9p: Security model for symlink and readlink
Mapped mode stores extended attributes in the user space of the extended
attributes. Given that the user space extended attributes are available
to regular files only, special files are created as regular files on the
fileserver and appropriate mode bits are added to the extended attributes.
This method presents all special files and symlinks as regular files on the
fileserver while they are represented as special files on the guest mount.

Implemntation of symlink in mapped security model:

A regular file is created and the link target is written to it.
readlink() reads it back from the file.

On Guest/Client:
lrwxrwxrwx 1 root root 6 2010-05-11 12:20 asymlink -> afile

On Host/Fileserver:
-rw-------. 1 root root 6 2010-05-11 09:20 asymlink
afile

Under passthrough model, it just calls underlying symlink() readlink()
system calls are used.

Under both security models, client user credentials are changed
after the filesystem objec creation.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:51 -05:00
Venkateswararao Jujjuri (JV)
00ec5c3760 virtio-9p: Security model for mkdir
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:51 -05:00
Venkateswararao Jujjuri (JV)
4750a96f6b virtio-9p: Security model for create/open2
In the mapped security model, VirtFS server intercepts and maps
the file object create and get/set attribute requests. Files on the fileserver
will be created with VirtFS servers (QEMU) user credentials and the
client-users credentials are stored in extended attributes. On the request
to get attributes, server extracts the client-users credentials
from extended attributes and sends them to the client.

On Host/Fileserver:
-rw-------. 2 virfsuid virtfsgid 0 2010-05-11 09:19 afile

On Guest/Client:
-rw-r--r-- 2 guestuser guestuser 0 2010-05-11 12:19 afile

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:50 -05:00
Venkateswararao Jujjuri (JV)
1237ad7607 virtio-9p: Implemented Security model for lstat and fstat
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:50 -05:00
Venkateswararao Jujjuri (JV)
f7613bee32 virtio-9p: Security model for chown
mapped model changes the owner in the extended attributes.
passthrough model does the change through lchown() as the
server don't need to follow the link and client will send the
actual filesystem object.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:50 -05:00
Venkateswararao Jujjuri (JV)
e95ead32ef virtio-9p: Security model for chmod
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:50 -05:00
Venkateswararao Jujjuri (JV)
758e8e38eb virtio-9p: Make infrastructure for the new security model.
This patch adds required infrastructure for the new security model.

- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:50 -05:00
Venkateswararao Jujjuri (JV)
9ce56db6f0 virtio-9p: Introduces an option to specify the security model.
The new option is:

-fsdev fstype,id=myid,path=/share_path/,security_model=[mapped|passthrough]
-virtfs fstype,path=/share_path/,security_model=[mapped|passthrough],mnt_tag=tag

In the case of mapped security model, files are created with QEMU user
credentials and the client-user's credentials are saved in extended attributes.
Whereas in the case of passthrough security model, files on the
filesystem are directly created with client-user's credentials.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:30 -05:00
Venkateswararao Jujjuri (JV)
fac4f11147 virtio-9p: Rearrange fileop structures
This patch rearranges the fileop structures by moving the structure definitions
from virtio-9p.c to virtio-9p.h file. No functional changes.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:30 -05:00
Venkateswararao Jujjuri (JV)
0db09dd2ab Flush the debug message out to the log file.
This patch fluesh the debug messages to the log file  at the end of each
debug message.

Changes from V1:
Used fflush instead fseek for the flush.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:30 -05:00
Yoshiaki Tamura
20a81e4d17 virtio-blk: fix the list operation in virtio_blk_load().
Although it is really rare to get in to the while loop, the list
operation in the loop is obviously wrong.

Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-22 14:38:02 +02:00
Nicholas Bellinger
c7126d5b32 scsi-bus: Add MAINTENANCE_IN and MAINTENANCE_OUT SCSIRequest xfer and mode assignments
This patch updates hw/scsi-bus.c to add MAINTENANCE_IN and MAINTENANCE_OUT case in
scsi_req_length() for TYPE_ROM with MMC commands.  It also adds the MAINTENANCE_OUT
case in scsi_req_xfer_mode() to set SCSI_XFER_TO_DEV for outgoing write data.

Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-22 14:38:01 +02:00
Nicholas Bellinger
01bedebaaf scsi-bus: Add PERSISTENT_RESERVE_OUT SCSIRequest->cmd.mode setup
This patch updates hw/scsi-bus.c to add the PERSISTENT_RESERVE_OUT cdb
case in scsi_req_xfer_mode() to set SCSI_XFER_TO_DEV for outgoing WRITE data.

Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-22 14:38:01 +02:00
Blue Swirl
92a16d7a9a apic: qdev conversion cleanup
Make APICState completely private to apic.c by using DeviceState
in external APIs.

Move apic_init() to pc.c.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-19 07:47:42 +00:00