Used by the driver to report its provided memory state information.
Co-developed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
One of advantages of using this protocol over ACPI-based PC DIMM hotplug is
that it allows hot-adding memory in much smaller granularity because the
ACPI DIMM slot limit does not apply.
In order to enable this functionality a new memory backend needs to be
created and provided to the driver via the "memdev" parameter.
This can be achieved by, for example, adding
"-object memory-backend-ram,id=mem1,size=32G" to the QEMU command line and
then instantiating the driver with "memdev=mem1" parameter.
The device will try to use multiple memslots to cover the memory backend in
order to reduce the size of metadata for the not-yet-hot-added part of the
memory backend.
Co-developed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
This driver is like virtio-balloon on steroids: it allows both changing the
guest memory allocation via ballooning and (in the next patch) inserting
pieces of extra RAM into it on demand from a provided memory backend.
The actual resizing is done via ballooning interface (for example, via
the "balloon" HMP command).
This includes resizing the guest past its boot size - that is, hot-adding
additional memory in granularity limited only by the guest alignment
requirements, as provided by the next patch.
In contrast with ACPI DIMM hotplug where one can only request to unplug a
whole DIMM stick this driver allows removing memory from guest in single
page (4k) units via ballooning.
After a VM reboot the guest is back to its original (boot) size.
In the future, the guest boot memory size might be changed on reboot
instead, taking into account the effective size that VM had before that
reboot (much like Hyper-V does).
For performance reasons, the guest-released memory is tracked in a few
range trees, as a series of (start, count) ranges.
Each time a new page range is inserted into such tree its neighbors are
checked as candidates for possible merging with it.
Besides performance reasons, the Dynamic Memory protocol itself uses page
ranges as the data structure in its messages, so relevant pages need to be
merged into such ranges anyway.
One has to be careful when tracking the guest-released pages, since the
guest can maliciously report returning pages outside its current address
space, which later clash with the address range of newly added memory.
Similarly, the guest can report freeing the same page twice.
The above design results in much better ballooning performance than when
using virtio-balloon with the same guest: 230 GB / minute with this driver
versus 70 GB / minute with virtio-balloon.
During a ballooning operation most of time is spent waiting for the guest
to come up with newly freed page ranges, processing the received ranges on
the host side (in QEMU and KVM) is nearly instantaneous.
The unballoon operation is also pretty much instantaneous:
thanks to the merging of the ballooned out page ranges 200 GB of memory can
be returned to the guest in about 1 second.
With virtio-balloon this operation takes about 2.5 minutes.
These tests were done against a Windows Server 2019 guest running on a
Xeon E5-2699, after dirtying the whole memory inside guest before each
balloon operation.
Using a range tree instead of a bitmap to track the removed memory also
means that the solution scales well with the guest size: even a 1 TB range
takes just a few bytes of such metadata.
Since the required GTree operations aren't present in every Glib version
a check for them was added to the meson build script, together with new
"--enable-hv-balloon" and "--disable-hv-balloon" configure arguments.
If these GTree operations are missing in the system's Glib version this
driver will be skipped during QEMU build.
An optional "status-report=on" device parameter requests memory status
events from the guest (typically sent every second), which allow the host
to learn both the guest memory available and the guest memory in use
counts.
Following commits will add support for their external emission as
"HV_BALLOON_STATUS_REPORT" QMP events.
The driver is named hv-balloon since the Linux kernel client driver for
the Dynamic Memory Protocol is named as such and to follow the naming
pattern established by the virtio-balloon driver.
The whole protocol runs over Hyper-V VMBus.
The driver was tested against Windows Server 2012 R2, Windows Server 2016
and Windows Server 2019 guests and obeys the guest alignment requirements
reported to the host via DM_CAPABILITIES_REPORT message.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
This commit adds Hyper-V Dynamic Memory Protocol definitions, taken
from hv_balloon Linux kernel driver, adapted to the QEMU coding style and
definitions.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
There is no strong requirement that the size has to be multiples of the
requested alignment, let's drop it. This is a preparation for hv-baloon.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
This reverts commit 5960f254db since the
previous commit made this situation possible again.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Let's support empty memory devices -- memory devices that don't have a
memory device region in the current configuration. hv-balloon with an
optional memdev is the primary use case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
* linux-user/elfload: Add missing arm64 hwcap values
* stellaris-gamepad: Convert to qdev
* docs/specs: Convert various txt docs to rST
* MAINTAINERS: Make sure that gicv3_internal.h is covered, too
* hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
* hw/watchdog/wdt_imx2: Trace MMIO access and timer activity
* hw/misc/imx7_snvs: Trace MMIO access
* hw/misc/imx6_ccm: Convert DPRINTF to trace events
* hw/i2c/pm_smbus: Convert DPRINTF to trace events
* target/arm: Enable FEAT_MOPS insns in user-mode emulation
* linux-user: Report AArch64 hwcap2 fields above bit 31
* target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
* target/arm: Fix SVE STR increment
* hw/char/stm32f2xx_usart: implement TX interrupts
* target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
* xlnx-versal-virt: Add AMD/Xilinx TRNG device
-----BEGIN PGP SIGNATURE-----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=OgfH
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* linux-user/elfload: Add missing arm64 hwcap values
* stellaris-gamepad: Convert to qdev
* docs/specs: Convert various txt docs to rST
* MAINTAINERS: Make sure that gicv3_internal.h is covered, too
* hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
* hw/watchdog/wdt_imx2: Trace MMIO access and timer activity
* hw/misc/imx7_snvs: Trace MMIO access
* hw/misc/imx6_ccm: Convert DPRINTF to trace events
* hw/i2c/pm_smbus: Convert DPRINTF to trace events
* target/arm: Enable FEAT_MOPS insns in user-mode emulation
* linux-user: Report AArch64 hwcap2 fields above bit 31
* target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
* target/arm: Fix SVE STR increment
* hw/char/stm32f2xx_usart: implement TX interrupts
* target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
* xlnx-versal-virt: Add AMD/Xilinx TRNG device
* tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device
hw/arm: xlnx-versal-virt: Add AMD/Xilinx TRNG device
hw/misc: Introduce AMD/Xilix Versal TRNG device
target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
hw/char/stm32f2xx_usart: Add more definitions for CR1 register
hw/char/stm32f2xx_usart: Update IRQ when DR is written
hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq()
target/arm: Fix SVE STR increment
target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
linux-user: Report AArch64 hwcap2 fields above bit 31
target/arm: Enable FEAT_MOPS insns in user-mode emulation
hw/i2c/pm_smbus: Convert DPRINTF to trace events
hw/misc/imx6_ccm: Convert DPRINTF to trace events
hw/misc/imx7_snvs: Trace MMIO access
hw/watchdog/wdt_imx2: Trace timer activity
hw/watchdog/wdt_imx2: Trace MMIO access
hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
MAINTAINERS: Make sure that gicv3_internal.h is covered, too
docs/specs/vmgenid: Convert to rST
docs/specs/vmcoreinfo: Convert to rST
...
Conflicts:
hw/input/stellaris_input.c
The qdev conversion in this pull request ("stellaris-gamepad: Convert
to qdev") eliminates the vmstate_register() call that was converted to
vmstate_register_any() in the conflicting migration pull request.
vmstate_register_any() is no longer necessary now that this device has
been converted to qdev, so take this pull request's version of
stellaris_gamepad.c over the previous pull request's
stellaris_input.c (the file was renamed).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hi
In this pull request:
- migration reboot mode (steve)
* I disabled the test because our CI don't like programs using so
much shared memory. Searching for a fix.
- test for postcopy recover (fabiano)
- MigrateAddress QAPI (het)
- better return path error handling (peter)
- traces for downtime (peter)
- vmstate_register() check for duplicates (juan)
thomas find better solutions for s390x and ipmi.
now also works on s390x
Please, apply.
-----BEGIN PGP SIGNATURE-----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=uaqL
-----END PGP SIGNATURE-----
Merge tag 'migration-20231102-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (20231102)
Hi
In this pull request:
- migration reboot mode (steve)
* I disabled the test because our CI don't like programs using so
much shared memory. Searching for a fix.
- test for postcopy recover (fabiano)
- MigrateAddress QAPI (het)
- better return path error handling (peter)
- traces for downtime (peter)
- vmstate_register() check for duplicates (juan)
thomas find better solutions for s390x and ipmi.
now also works on s390x
Please, apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVDipMACgkQ9IfvGFhy
# 1yNYnQ/9E5Cywsoqljqa/9FiKBSII2qMrmkfu6JLKqePnsh5pFZiukbudYRuJCCe
# ZTDEmD0NmKRJbDx2xRU1qx/e6gKJy+gz37KP89Buuh/WwZHPboPYtxQpGvCSiH26
# J3i+1+TgaqmkLzcO35wa8tp6gneQclWeAwKgMvdb4cm2pJEhgWRKI62ccyLzxeve
# UCzFQn60t55ETyVZGnRD4YwdTQvGKH+DPlyTuJOLR3DePuvZd8EdH+ypvB4RLAy7
# 3+CuQOxmF5LRXPbpJuAeOsudbmhhHzrO/yL7ZmsiKQTthsJv+SzC1bO94jhQrawZ
# Q7GCii5KpGq0KnRTRKZRGk6XKwxcYRduXMX3R5tXuVmDmCZsjhXzziU8yEdftph8
# 5TJdk1o0Gb043EFu81mrsQYS+9yJqe6sy6m3PTJaec54cAty5ln+c17WOvpAOaSV
# +1phe05ftuVPmQ3KWhbIR/tCmavNLwEZxpVIfyaKJx04bFbtQ9gRpRyURORX4KXc
# s4WXvNirQEohxYBnP4TPvA09xBTW3V08pk/wRDwt0YDXnLiqCltOuxD8r05K8K4B
# MkCLcWj0g7he2tBkF60oz1KSIE0oTB81um9AzLIv5F2YSYLaJM5BIcoC437MR2f4
# MOR7drR1fP5GsRu/SeU5BWvhVq3IvdOxR7G2MLNRJJvl7ZtGXDc=
# =uaqL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Nov 2023 19:40:03 HKT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20231102-pull-request' of https://gitlab.com/juan.quintela/qemu: (40 commits)
migration: modify test_multifd_tcp_none() to use new QAPI syntax.
migration: Implement MigrateChannelList to hmp migration flow.
migration: Implement MigrateChannelList to qmp migration flow.
migration: modify migration_channels_and_uri_compatible() for new QAPI syntax
migration: New migrate and migrate-incoming argument 'channels'
migration: Convert the file backend to the new QAPI syntax
migration: convert exec backend to accept MigrateAddress.
migration: convert rdma backend to accept MigrateAddress
migration: convert socket backend to accept MigrateAddress
migration: convert migration 'uri' into 'MigrateAddress'
migration: New QAPI type 'MigrateAddress'
migration: Change ram_dirty_bitmap_reload() retval to bool
tests/migration-test: Add a test for postcopy hangs during RECOVER
migration: Allow network to fail even during recovery
migration: Refactor error handling in source return path
tests/qtest: migration: add reboot mode test
cpr: reboot mode
cpr: relax vhost migration blockers
cpr: relax blockdev migration blockers
migration: per-mode blockers
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Tong Ho <tong.ho@amd.com>
Message-id: 20231031184611.3029156-4-tong.ho@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the support for Versal True Random Number Generator
(TRNG) device.
Warning: unlike the TRNG component in a real device from the
Versal device familiy, the connected TRNG model is not of
cryptographic grade and is not intended for use cases when
cryptograpically strong TRNG is needed.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20231031184611.3029156-3-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a non-cryptographic grade implementation of the
model for the True Random Number Generator (TRNG) component
in AMD/Xilinx Versal device family.
This implements all 3 modes defined by the actual hardware
specs, all of which selectable by guest software at will
at anytime:
1) PRNG mode, in which the generated sequence is required to
be reproducible after reseeded by the same 384-bit value
as supplied by guest software.
2) Test mode, in which the generated sequence is required to
be reproducible ater reseeded by the same 128-bit test
seed supplied by guest software.
3) TRNG mode, in which non-reproducible sequence is generated
based on periodic reseed by a suitable entropy source.
This model is only intended for non-real world testing of
guest software, where cryptographically strong PRNG or TRNG
is not needed.
This model supports versions 1 & 2 of the device, with
default to be version 2; the 'hw-version' uint32 property
can be set to 0x0100 to override the default.
Other implemented properties:
- 'forced-prng', uint64
When set to non-zero, mode 3's entropy source is implemented
as a deterministic sequence based on the given value and other
deterministic parameters.
This option allows the emulation to test guest software using
mode 3 and to reproduce data-dependent defects.
- 'fips-fault-events', uint32, bit-mask
bit 3: Triggers the SP800-90B entropy health test fault irq
bit 1: Triggers the FIPS 140-2 continuous test fault irq
Signed-off-by: Tong Ho <tong.ho@amd.com>
Message-id: 20231031184611.3029156-2-tong.ho@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In a two-stage translation, the result of the BTI guarded bit should
be the guarded bit from the first stage of translation, as there is
no BTI guard information in stage two. Our code tried to do this,
but got it wrong, because we currently have two fields where the GP
bit information might live (ARMCacheAttrs::guarded and
CPUTLBEntryFull::extra::arm::guarded), and we were storing the GP bit
in the latter during the stage 1 walk but trying to copy the former
in combine_cacheattrs().
Remove the duplicated storage, and always use the field in
CPUTLBEntryFull; correctly propagate the stage 1 value to the output
in get_phys_addr_twostage().
Note for stable backports: in v8.0 and earlier the field is named
result->f.guarded, not result->f.extra.arm.guarded.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1950
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231031173723.26582-1-peter.maydell@linaro.org
The previous change missed updating one of the increments and
one of the MemOps. Add a test case for all vector lengths.
Cc: qemu-stable@nongnu.org
Fixes: e6dd5e782b ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231031143215.29764-1-richard.henderson@linaro.org
[PMM: fixed checkpatch nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the registers used by the FEAT_MOPS instructions cannot use
31 as a register field value; this is CONSTRAINED UNPREDICTABLE to
NOP or UNDEF (we UNDEF). However, it is permitted for the "source
value" register for the memset insns SET* to be 31, which (as usual
for most data-processing insns) means it should be the zero register
XZR. We forgot to handle this case, with the effect that trying to
set memory to zero with a "SET* Xd, Xn, XZR" sets the memory to
the value that happens to be in the low byte of SP.
Handle XZR when getting the SET* data value from the register file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030174000.3792225-4-peter.maydell@linaro.org
The AArch64 ELF hwcap2 field is 64 bits, but our get_elf_hwcap2()
works with uint32_t, so it accidentally fails to report any hwcaps
over bit 31. Use uint64_t here.
The Arm hwcap2 is only 32 bits (because the ELF format makes these
fields be the size of "long" in the ABI), but since it shares the
prototype declaration for get_elf_hwcap2() it is easier to also
expand it to 64 bits.
The only hwcap fields we implement already that are affected by this
are the HBC and MOPS ones, neither of which were implemented in a
previous release, so this doesn't need backporting to older stable
branches.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030174000.3792225-3-peter.maydell@linaro.org
In user-mode emulation, we need to set the SCTLR_EL1.MSCEn
bit to avoid all the FEAT_MOPS insns UNDEFing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231030174000.3792225-2-peter.maydell@linaro.org
Let the trace messages slightly deviate from the function names
("smb" -> "smbus") being traced in order to avoid conflights with the SMB
protocol.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20231028122415.14869-6-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231028122415.14869-5-shentey@gmail.com
[PMM: Add "Hz" unit indicator to frequency traces]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231028122415.14869-4-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20231028122415.14869-3-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231028122415.14869-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of passing the CPU index and resolving it,
use a QOM link to directly pass the CPU.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030083706.63685-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gic_internal.h is already covered by the "ARM cores" section.
Let's adapt the entry with a wildcard to cover gicv3_internal.h, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231027060709.242388-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert docs/specs/vmgenid.txt to rST format.
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-9-peter.maydell@linaro.org
Convert docs/specs/virt-ctlr.txt to rST format.
I added the name of the device to give readers a bit more idea
of which device we're actually documenting here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-7-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert docs/specs/standard-vga.txt to rST format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-6-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert docs/specs/pvpanic.txt to rST format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-5-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert docs/specs/ivshmem-spec.txt to rST format.
In converting, I have dropped the sections on the device's command
line interface and usage, as they are already covered by the
user-facing docs in system/devices/ivshmem.rst.
I have also removed the reference to Memnic, because the URL is dead
and a web search suggests that whatever this was it's pretty much
sunk without trace.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-4-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert docs/specs/edu.txt to rST format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230927151205.70930-3-peter.maydell@linaro.org
Convert the docs/specs/vmw_pvscsi-spec.txt file to rST format.
This conversion includes some minor wordsmithing of the text
to fix some grammar nits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230927151205.70930-2-peter.maydell@linaro.org
Now that we have converted to qdev, we can use the newer
qemu_input_handler_register() API rather than the legacy
qemu_add_kbd_event_handler().
Since we only have one user, take the opportunity to convert
from scancodes to QCodes, rather than using
qemu_input_key_value_to_scancode() (which adds an 0xe0
prefix and encodes up/down indication in the scancode,
which our old handler function then had to reverse). That
lets us drop the old state field which was tracking whether
we were halfway through a two-byte scancode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-7-peter.maydell@linaro.org
Convert the hw/input/stellaris_input device to qdev.
The interface uses an array property for the board to specify the
keycodes to use, so the s->keycodes memory is now allocated by the
array-property machinery.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-6-peter.maydell@linaro.org
Currently for each button on the device we have a
StellarisGamepadButton struct which has the irq, keycode and pressed
state for it. When we convert to qdev, the qdev property and GPIO
APIs are going to require that we have separate arrays for the irqs
and keycodes. Convert from array-of-structs to three separate arrays
in preparation.
This is a migration compatibility break for the stellaris boards
(lm3s6965evb, lm3s811evb).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-5-peter.maydell@linaro.org
--
v1=>v2: mention migration compat break in commit message;
bump version fields in vmstate
Instead of exposing the ugly hack of how we represent arrays in qdev (a
static "foo-len" property and after it is set, dynamically created
"foo[i]" properties) to boards, add an interface that allows setting the
whole array at once.
Once all internal users of devices with array properties have been
converted to use this function, we can change the implementation to move
away from this hack.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-4-peter.maydell@linaro.org
Rename the structs in stellaris_gamepad.c to our now-standard
CamelCase convention.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-3-peter.maydell@linaro.org
This source file implements a stellaris gamepad device; rename
it so that it is a closer match to the device name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-2-peter.maydell@linaro.org
Specifically DIT, LSE2, and MTE3.
We already expose detection of these via the CPUID interface, but
missed these from ELF hwcaps.
Signed-off-by: Marielle Novastrider <marielle@novastrider.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231029210058.38986-1-marielle@novastrider.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed conflict with feature tests moving to cpu-features.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
modify multifd tcp common test to incorporate the new QAPI
syntax defined.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-15-farosas@suse.de>
Integrate MigrateChannelList with all transport backends
(socket, exec and rdma) for both src and dest migration
endpoints for hmp migration.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20231023182053.8711-14-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Integrate MigrateChannelList with all transport backends
(socket, exec and rdma) for both src and dest migration
endpoints for qmp migration.
For current series, limit the size of MigrateChannelList
to single element (single interface) as runtime check.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-13-farosas@suse.de>
migration_channels_and_uri_compatible() check for transport mechanism
suitable for multifd migration gets executed when the caller calls old
uri syntax. It needs it to be run when using the modern MigrateChannel
QAPI syntax too.
After URI -> 'MigrateChannel' :
migration_channels_and_uri_compatible() ->
migration_channels_and_transport_compatible() passes object as argument
and check for valid transport mechanism.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-12-farosas@suse.de>
MigrateChannelList allows to connect accross multiple interfaces.
Add MigrateChannelList struct as argument to migration QAPIs.
We plan to include multiple channels in future, to connnect
multiple interfaces. Hence, we choose 'MigrateChannelList'
as the new argument over 'MigrateChannel' to make migration
QAPIs future proof.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-10-farosas@suse.de>
Convert the file: URI to accept a FileMigrationArgs to be compatible
with the new migration QAPI.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-9-farosas@suse.de>
Exec transport backend for 'migrate'/'migrate-incoming' QAPIs accept
new wire protocol of MigrateAddress struct.
It is achived by parsing 'uri' string and storing migration parameters
required for exec connection into strList struct.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-8-farosas@suse.de>
RDMA based transport backend for 'migrate'/'migrate-incoming' QAPIs
accept new wire protocol of MigrateAddress struct.
It is achived by parsing 'uri' string and storing migration parameters
required for RDMA connection into well defined InetSocketAddress struct.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-7-farosas@suse.de>
