Stop abusing displaysurface fields for text mode displays.
(bpp = 0, width = cols, height = lines).
Add flags to displaystate indicating whenever text mode display
(curses) or gfx mode displays (sdl, vnc, ...) are present.
Add separate displaychangelistener callbacks for text / gfx mode
resize & updates.
This allows to enable gfx and txt diplays at the same time and also
paves the way for more cleanups in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also change the way the gui_timer is initialized: each time a
displaychangelistener is registered or unregistered we'll check
whether we need a timer (due to dpy_refresh callback being present)
and if so setup a timer, otherwise zap it. This way the gui timer
works correctly with displaychangelisteners coming and going.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As the block layer may decide to flush bottom-halfs while the machine is
still initializing (e.g. to read geometry data from the disk), our
postponed open event may be processed before the last frontend
registered with a muxed chardev.
Until the semantics of BHs have been clarified, use an expired timer to
achieve the same effect (suggested by Paolo Bonzini). This requires to
perform the alarm timer initialization earlier as otherwise timer
subsystem can be used before being ready.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -tdf option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm-pit-reinjection.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm-pit option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm-irqchip option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Otherwise, chardevs will not be able to create a bottom half as soon
as that will require an AioContext.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kwolf/for-anthony: (32 commits)
osdep: Less restrictive F_SEFL in qemu_dup_flags()
qemu-iotests: add testcases for mirroring on-source-error/on-target-error
qmp: add pull_event function
mirror: add support for on-source-error/on-target-error
iostatus: forward block_job_iostatus_reset to block job
qemu-iotests: add mirroring test case
mirror: implement completion
qmp: add drive-mirror command
mirror: introduce mirror job
block: introduce BLOCK_JOB_READY event
block: add block-job-complete
block: rename block_job_complete to block_job_completed
block: export dirty bitmap information in query-block
block: introduce new dirty bitmap functionality
block: add bdrv_open_backing_file
block: add bdrv_query_stats
block: add bdrv_query_info
qemu-config: Add new -add-fd command line option
monitor: Prevent removing fd from set during init
monitor: Enable adding an inherited fd to an fd set
...
Conflicts:
vl.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (22 commits)
PPC: pseries: Remove hack for PIO window
PPC: e500: Map PIO space into core memory region
xen_platform: convert PIO to new memory api read/write
vmport: convert PIO to new memory api read/write
serial: convert PIO to new memory api read/write
rtl8139: convert PIO to new memory api read/write
pckbd: convert PIO to new memory api read/write
pc port92: convert PIO to new memory api read/write
mc146818rtc: convert PIO to new memory api read/write
m48t59: convert PIO to new memory api read/write
i8254: convert PIO to new memory api read/write
es1370: convert PIO to new memory api read/write
virtio-pci: convert PIO to new memory api read/write
ac97: convert PIO to new memory api read/write
pseries: Implement qemu initiated shutdowns using EPOW events
target-ppc: Rework storage of VPA registration state
pseries: Don't allow duplicate registration of hcalls or RTAS calls
Add USB option in machine options
e500: Fix serial initialization
PPC: 440: Emulate DCBR0
...
* 'queue/qmp' of git://repo.or.cz/qemu/qmp-unstable:
migration: go to paused state after finishing incoming migration with -S
qmp: handle stop/cont in INMIGRATE state
hmp: fix info cpus for sparc targets
When -usb option is used, global varible usb_enabled is set.
And all the plaform will create one USB controller according
to this variable. In fact, global varibles make code hard
to read.
So this patch is to remove global variable usb_enabled and
add USB option in machine options. All the plaforms will get
USB option value from machine options.
USB option of machine options will be set either by:
* -usb
* -machine type=pseries,usb=on
Both these ways can work now. They both set USB option in
machine options. In the future, the first way will be removed.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the end of migration the machine has started already, and cannot be
destroyed without losing the guest's data. Hence, prelaunch is the
wrong state. Go to the paused state instead. QEMU would reach that
state anyway (after running the guest for the blink of an eye) if the
"stop" command had been received after the start of migration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This option can be used for passing file descriptors on the
command line. It mirrors the existing add-fd QMP command which
allows an fd to be passed to QEMU via SCM_RIGHTS and added to an
fd set.
This can be combined with commands such as -drive to link file
descriptors in an fd set to a drive:
qemu-kvm -add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
-add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
-drive file=/dev/fdset/2,index=0,media=disk
This example adds dups of fds 3 and 4, and the accompanying opaque
strings to the fd set with ID=2. qemu_open() already knows how
to handle a filename of this format. qemu_open() searches the
corresponding fd set for an fd and when it finds a match, QEMU
goes on to use a dup of that fd just like it would have used an
fd that it opened itself.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before:
$ qemu-system-x86_64 -vnc foo.bar:12345
getaddrinfo(foo.bar,18245): Name or service not known
Failed to start VNC server on `foo.bar:12345'
$ qemu-system-x86_64 -vnc localhost:12345,reverse=on
inet_connect_opts: connect(ipv4,yakj.usersys.redhat.com,127.0.0.1,12345): Connection refused
Failed to start VNC server on `localhost:12345,reverse=on'
After:
$ x86_64-softmmu/qemu-system-x86_64 -vnc foo.bar:12345
Failed to start VNC server on `foo.bar:12345': address resolution failed for foo.bar:18245: Name or service not known
$ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:12345,reverse=on
Failed to start VNC server on `localhost:12345,reverse=on': Failed to connect to socket: Connection refused
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
And remove the superfluous integer return value.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This should help us to:
- More easily add or remove machine initialization arguments without
having to change every single machine init function;
- More easily make mechanical changes involving the machine init
functions in the future;
- Let machine initialization forward the init arguments to other
functions more easily.
This change was half-mechanical process: first the struct was added with
the local ram_size, boot_device, kernel_*, initrd_*, and cpu_model local
variable initialization to all functions. Then the compiler helped me
locate the local variables that are unused, so they could be removed.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'trivial-patches' of git://github.com/stefanha/qemu:
versatilepb: Use symbolic indices for ARM PIC
qdev: kill bogus comment
qemu-barrier: Fix compiler version check for future gcc versions
hw: Add missing 'static' attribute for QEMUMachine
cleanup useless return sentence
qemu-sockets: Fix compiler warning (regression for MinGW)
vnc: Fix spelling (hellmen -> hellman) in comment
slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
cpu: Add missing 'static' attribute to qemu_global_mutex
configure: Support empty target list (--target-list=)
hw: Fix return value check for bdrv_read, bdrv_write
Check for qxl availability in vl.c. This will allow to remove #ifdef
CONFIG_SPICE .. #endif later in this series
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Added an option to let qemu transfer a configuration file to bios,
"etc/boot-fail-wait", which could be specified by command
-boot reboot-timeout=T
T have a max value of 0xffff, unit is ms.
With this option, guest will wait for a given time if not find
bootabled device, then reboot. If reboot-timeout is '-1', guest
will not reboot, qemu passes '-1' to bios by default.
This feature need the new seabios's support.
Seabios pulls the value from the fwcfg "file" interface, this
interface is used because SeaBIOS needs a reliable way of
obtaining a name, value size, and value. It in no way requires
that there be a real file on the user's host machine.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All deps that used global qemu_system_powerdown var are now converted
to notifiers, so remove it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Notifier will be used for signaling powerdown request to guest in
a more general way and intended to replace very specific
qemu_irq_rise(qemu_system_powerdown) and will allow to remove global
variable qemu_system_powerdown.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Current qemu initializes curses even if -daemonize option is
passed. This cause problem because shell prompt appears without
calling endwin().
This patch adds new function, is_daemonized(), to OS dependent
code. With this function, curses_display_init() can check that qemu is
daemonized or not. If daemonized, curses_display_init() isn't called
and the problem is avoided.
Of course, -daemonize && -curses doesn't make sense. Users shouldn't
pass the arguments at the same time. But the problem is very painful
because Ctrl-C cannot be delivered to the terminal.
Cc: Andrzej Zaborowski <balrog@zabor.org>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Hitoshi Mitake <h.mitake@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
This patch provides a way to optionally suppress spurious interrupts,
as a workaround for systems described below:
Some old operating systems do not handle spurious interrupts well,
and qemu tends to generate them significantly more often than
real hardware.
Examples:
- Microport UNIX System V/386 v 2.1 (ca 1987)
(The main problem I'm fixing: Without this patch, it panics
sporadically when accessing the hard disk.)
- AT&T UNIX System V/386 Release 4.0 Version 2.1a (ca 1991)
See screenshot in "QEMU Official OS Support List":
http://www.claunia.com/qemu/objectManager.php?sClass=application&iId=9
(I don't have this system to test.)
- A report about OS/2 boot lockup from 2004 by Hampa Hug:
http://lists.nongnu.org/archive/html/qemu-devel/2004-09/msg00367.html
(My patch was partially inspired by his.)
Also: http://lists.nongnu.org/archive/html/qemu-devel/2005-06/msg00243.html
(I don't have this system to test.)
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
This patch adds some optional compatibility hacks (default
disabled) to allow Microport UNIX to function under qemu.
I've tried to structure it to be easy to add more hacks for other
old CGA programs, if anyone ever needs them.
Microport UNIX System V/386 v 2.1 (ca 1987) tries to program
the CGA registers directly with neither the assistance of BIOS, nor
with proper handling of EGA/VGA-only registers. Note that it didn't
work on real VGA hardware, either (although in that case, the most
obvious problems seemed to be out-of-range hsync and/or vsync
signalling, rather than the issues in this patch).
Eventually real MDA and/or CGA support might provide an alternative to
this patch, although a hybrid approach like this patch might still
be useful in marginal cases.
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
Without this patch, the -hdachs argument had to occur either
BEFORE the corresponding "-hda" option, or AFTER the plain
disk image name (if neither -hda nor -drive is used). Otherwise
it would effectively be ignored.
Option -hdachs still has no effect on -drive, but that seems best.
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
Partial pages make little sense and don't work. Ensure the RAM size
is a multiple of any possible target's page size.
Fixes
$ qemu-system-x86_64 -nodefaults -S -vnc :0 -m 0.8
qemu-system-x86_64: /work/armbru/qemu/exec.c:2255: register_subpage: Assertion `existing->mr->subpage || existing->mr == &io_mem_unassigned' failed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu_system_reset() function always performs the same basic actions on
all machines. This includes running all the reset handler hooks,
however the order in which these will run is not always easily predictable.
This patch splits the core of qemu_system_reset() - the invocation of
the reset handlers - out into a new qemu_devices_reset() function.
qemu_system_reset() will usually call qemu_devices_reset(), but that
can be now overriden by a new reset method in the QEMUMachine
structure.
Individual machines can use this reset method, if necessary, to
perform any extra, machine specific initializations which have to
occur before or after the bulk of the reset handlers. It's expected
that the method will call qemu_devices_reset() at some point, but if
the machine has really strange ordering requirements between devices
resets it could even override that with it's own reset sequence (with
great care, obviously).
For a specific example of when this might be needed: a number of
machines (but not PC) load images specified with -kernel or -initrd
directly into the machine RAM before booting the guest. This mostly
works at the moment, but to make this actually safe requires that this
load occurs after peripheral devices are reset - otherwise they could
have active DMAs in progress which would clobber the in memory images.
Some machines (notably pseries) also have other entry conditions which
need to be set up as the last thing before executing in guest space -
some of this could be considered "emulated firmware" in the sense that
the actions of the firmware are emulated directly by qemu rather than
by executing a firmware image within the guest. When the platform's
firmware to OS interface is sufficiently well specified, this saves
time both in implementing the "firmware" and executing it.
aliguori: don't unconditionally dereference current_machine
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1:
- Full seccomp calls and data included in vl.c
v1 -> v2:
- Full seccomp calls and data removed from vl.c and put into separate
qemu-seccomp.[ch] file.
This provides the same output as -M ? but in a structured way.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Today, the WAKEUP event is emitted when a wakeup _request_ is made.
This could be the system_wakeup command, for example.
A better semantic would be to emit the event when the guest is
already running, as that's what matters in the end. This commit does
that change.
In theory, this could break compatibility. In practice, it shouldn't
happen though, as clients shouldn't rely on timing characteristics of
the events. That is, a client relying that the guest is not running
when the event arrives may break if the event arrives after the guest
is already running.
This commit also adds the missing documentation for the WAKEUP event.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU is basically using reset logic when waking up from S3. This
causes the QMP RESET event to be emitted, which is wrong. Also,
the runstate checks done in reset are not necessary for S3 wakeup.
Fix this by untangling wakeup from reset logic and passing
VMRESET_SILENT to qemu_system_reset() to avoid emitting the RESET
event.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
* stefanha/trivial-patches:
target-arm: Fix typos in comments
arm: translate: comment typo - s/middel/middle/
vl.c: Exit QEMU early if no machine is found
* bonzini/scsi-next:
scsi-disk: add support for the UNMAP command
scsi-disk: improve out-of-range LBA detection for WRITE SAME
scsi-disk: more assertions and resets for aiocb
virtio-scsi: do not compare 32-bit QEMU tags against 64-bit virtio-scsi tags
iscsi: Pick default initiator-name based on the name of the VM
iscsi: reorganize code for parse_initiator_name
iscsi: do not leak initiator_name
We check whether the variable machine is NULL or not before accessing
it. If machine is NULL, exit QEMU with an error, this can avoids a
segfault error.
Markus Armbruster <armbru@redhat.com> adds that the segfault can be
reproduced as follows:
$ qemu-system-xtensa -cpu help
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
A command line device probe using just -device "?" gets processed
after qemu-kvm initializes the accelerator. If /dev/kvm is not
present, the accelerator check will fail (kvm is defaulted to on),
which causes libvirt to not be set up to handle qemu guests.
Moving the device help handling before the accelerator set up allows
the device probe to work in this configuration and libvirt succeeds
in setting up for a qemu hypervisor mode.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch updates the iscsi layer to automatically pick a 'unique'
initiator-name based on the name of the vm in case the user has not set
an explicit iqn-name to use.
Create a new function qemu_get_vm_name() that returns the name of the VM,
if specified.
This way we can thus create default names to use as the initiator name
based on the guest session.
If the VM is not named via the '-name' command line argument, the iscsi
initiator-name used wiull simply be
iqn.2008-11.org.linux-kvm
If a name for the VM was specified with the '-name' option, iscsi will
use a default initiatorname of
iqn.2008-11.org.linux-kvm:<name>
These names are just the default iscsi initiator name that qemu will
generate/use only when the user has not set an explicit initiator name
via the commandlines or config files.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Commit 0f66998 makes -enable-fips conditional on Linux hosts but then uses it
unconditionally in vl.c.
Fix this by moving the fips handling to os-posix.c and adding a condition.
Cc: Paul Moore <pmoore@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
FIPS 140-2 requires disabling certain ciphers, including DES, which is used
by VNC to obscure passwords when they are sent over the network. The
solution for FIPS users is to disable the use of VNC password auth when the
host system is operating in FIPS compliance mode and the user has specified
'-enable-fips' on the QEMU command line.
This patch causes QEMU to emit a message to stderr when the host system is
running in FIPS mode and a VNC password was specified on the commend line.
If the system is not running in FIPS mode, or is running in FIPS mode but
VNC password authentication was not requested, QEMU operates normally.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* commit '6c779f22a93cc6e4565b940ef616e3efc5b50ba5':
Change ram_save_block to return -1 if there are no more changes
ram: save_live_setup() we don't need to synchronize the dirty bitmap.
ram: iterate phase
ram: save_live_complete() only do one loop
ram: save_live_setup() don't need to sent pages
savevm: split save_live into stage2 and stage3
savevm: split save_live_setup from save_live_state
savevm: introduce is_active method
savevm: Refactor cancel operation in its own operation
savevm: remove SaveLiveStateHandler
savevm: remove SaveSetParamsHandler
savevm: Live migration handlers register the struct directly
savevm: Use a struct to pass all handlers
The qemu_chr_new() function doesn't set errno on failure, so
don't print strerror(errno) on the error handling path when
dealing with the -serial, -parallel and -virtioconsole arguments.
This avoids nonsensical error messages like:
$ ./arm-softmmu/qemu-system-arm -serial wombat
qemu: could not open serial device 'wombat': Success
We also rephrase the message slightly to make it a little clearer
that we're expecting the name of a QEMU chr backend rather than
a host or guest serial/parallel/etc device.
Reported-by: Christian Müller <christian.mueller@heig-vd.ch>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Notice that the live migration users never unregister, so no problem
about freeing the ops structure.
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are two producers of these hints: drive_init() on behalf of
-drive, and hd_geometry_guess().
The only consumer of the hint is hd_geometry_guess().
The callers of hd_geometry_guess() call it only when drive_init()
didn't set the hints. Therefore, drive_init()'s hints are never used.
Thus, hd_geometry_guess() only ever sees hints it produced itself in a
prior call. Only the first call computes something, subsequent calls
just repeat the first call's results. However, hd_geometry_guess() is
never called more than once: the device models don't, and the block
device is destroyed on unplug. Thus, dropping the repeat feature
doesn't break anything now.
If a block device wasn't destroyed on unplug and could be reused with
a new device, then repeating old results would be wrong. Thus,
dropping the repeat feature prevents future breakage.
This renders the hints unused. Purge them from the block layer.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently qemu outputs some low-level error in qemu-sockets.c
when failed to start vnc server.
eg. 'getaddrinfo(127.0.0.1,5902): Name or service not known'
Some libvirt users could not know what's happened with this
unclear error message. This patch added a more descriptive
error message.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Make qemu_find_file() check for the passed in name as a straight
pathname even if it doesn't have any path separator character in it.
This means that "-bios foo", "-dtb foo" etc will find a file 'foo'
in the current directory.
This removes an inconsistency with -kernel and -initrd, which both
accept plain filenames as meaning files in the current directory.
It's also less confusing for the user than an undocumented restriction
that "this option accepts a filename, except for the special case
where the filename you pass happens not to have a '/' in it, in
which case we'll ignore it."
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU exposes its version to the guest's hardware and in some cases that is wrong
(e.g. Windows prints messages about driver updates when you switch
the QEMU version).
There is a new field now on the struct QEmuMachine, hw_version, which may
contain the version that the specific machine should report. If that field is
set, then that machine will report that version to the guest.
Signed-off-by: Crístian Viana <vianac@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
<libutil.h> and <util.h> on *BSD (some have one, some another)
were #included just for openpty() declaration. The only file
where this function is actually used is qemu-char.c.
In vl.c and net/tap-bsd.c, none of functions declared in libutil.h
(login logout logwtmp timdomain openpty forkpty uu_lock realhostname
fparseln and a few others depending on version) are used.
Initially the code which is currently in qemu-char.c was in vl.c,
it has been removed into separate file in commit 0e82f34d07
Fri Oct 31 18:44:40 2008, but the #includes were left in vl.c.
So with vl.c, we just remove includes - libutil.h, util.h and
pty.h (which declares only openpty() and forkpty()) from there.
The code in net/tap-bsd.c, which come from net/tap.c, had this
commit 5281d757ef
Author: Mark McLoughlin <markmc@redhat.com>
Date: Thu Oct 22 17:49:07 2009 +0100
net: split all the tap code out into net/tap.c
Note this commit not only moved stuff out of net.c to net/tap.c,
but also rewrote large portions of the tap code, and added these
completely unnecessary #includes -- as usual, I question why such
a misleading commit messages are allowed.
Again, no functions defined in libutil.h or util.h on *BSD are
used by neither net/tap.c nor net/tap-bsd.c. Removing them.
And finally, the only real user for these #includes, qemu-char.c,
which actually uses openpty(). There, the #ifdef logic is wrong.
A GLIBC-based system has <pty.h>, even if it is a variant of *BSD.
So __GLIBC__ should be checked first, and instead of trying to
include <libutil.h> or <util.h>, we include <pty.h>. If it is not
GLIBC-based, we check for variations between <*util.h> as before.
This patch fixes build of qemu 1.1 on Debian/kFreebsd (well, one
of the two problems): it is a distribution with a FreeBSD kernel,
so it #defines at least __FreeBSD_kernel__, but since it is based
on GLIBC, it has <pty.h>, but current version does not have neither
<util.h> nor <libutil.h>, which the code tries to include 3 times
but uses only once.
Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This commit converts qemu_opts_create() from qerror_report() to
error_set().
Currently, most calls to qemu_opts_create() can't fail, so most
callers don't need any changes.
The two cases where code checks for qemu_opts_create() erros are:
1. Initialization code in vl.c. All of them print their own
error messages directly to stderr, no need to pass the Error
object
2. The functions opts_parse(), qemu_opts_from_qdict() and
qemu_chr_parse_compat() make use of the error information and
they can be called from HMP or QMP. In this case, to allow for
incremental conversion, we propagate the error up using
qerror_report_err(), which keeps the QError semantics
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>
This is a partial revert of commits a369da5 (vga: improve VGA logic,
committed 2012-01-22) and c5bd4f3 (vga: fix -nodefaults -device VGA,
2012-01-24) which broke command-line option parsing in different ways.
Since commit a369da5 it has become impossible to specify a VGA device
entirely with QemuOpts-enabled options, i.e. without needing an explicit
"-vga none".
In addition, until commit c5bd4f3 -nodefaults would not disable the device
you specified with the legacy "-vga" option, independent of the order.
Since commit c5bd4f3 QEMU -nodefaults will override a previous -vga
option.
I did not reintroduce machine->no_vga. Boards can simply ignore the
vga_interface_type variable, and most will indeed do so.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use help functions in qemu-socket.c for tcp migration,
which already support ipv6 addresses.
Currently errp will be set to UNDEFINED_ERROR when migration fails,
qemu would output "migration failed: ...", and current user can
see a message("An undefined error has occurred") in monitor.
This patch changed tcp_start_outgoing_migration()/inet_connect()
/inet_connect_opts(), socket error would be passed back,
then current user can see a meaningful err message in monitor.
Qemu will exit if listening fails, so output socket error
to qemu stderr.
For IPv6 brackets must be mandatory if you require a port.
Referencing to RFC5952, the recommended format is:
[2312::8274]:5200
test status: Successed
listen side: qemu-kvm .... -incoming tcp:[2312::8274]:5200
client side: qemu-kvm ...
(qemu) migrate -d tcp:[2312::8274]:5200
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Function added to arch_init.c because it depends on arch-specific
settings.
Changes v1 -> v2:
- Move qemu_read_default_config_file() prototype to qemu-config.h
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU enters in this state when the guest suspends to ram (S3).
This is important so that HMP users and QMP clients can know that
the guest is suspended. QMP also has an event for this, but events
are not reliable and are limited (ie. a client can connect to QEMU
after the event has been emitted).
Having a different state for S3 brings a new issue, though. Every
device that doesn't run when the VM is stopped but wants to run
when the VM is suspended has to check for RUN_STATE_SUSPENDED
explicitly. This is the case for the keyboard and mouse devices,
for example.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The idea behind qtest is pretty simple. Instead of executing a CPU via TCG or
KVM, rely on an external process to send events to the device model that the CPU
would normally generate.
qtest presents itself as an accelerator. In addition, a new option is added to
establish a qtest server (-qtest) that takes a character device. This is what
allows the external process to send CPU events to the device model.
qtest uses a simple line based protocol to send the events. Documentation of
that protocol is in qtest.c.
I considered reusing the monitor for this job. Adding interrupts would be a bit
difficult. In addition, logging would also be difficult.
qtest has extensive logging support. All protocol commands are logged with
time stamps using a new command line option (-qtest-log). Logging is important
since ultimately, this is a feature for debugging.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will let people use backwards-compatible semantics for devices that
will be affected by the following patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix stupid copy&paste mistake at commit
ecf40beae7: I moved code around but kept
"optarg" on the cpu_list() call.
Reported-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* sstabellini/saverestore-8:
xen: do not allocate RAM during INMIGRATE runstate
xen mapcache: check if memory region has moved.
xen: record physmap changes to xenstore
Set runstate to INMIGRATE earlier
Introduce "xen-save-devices-state"
cirrus_vga: do not reset videoram
Conflicts:
qapi-schema.json
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Set runstate to RUN_STATE_INMIGRATE as soon as we can on resume.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 1b71f7c14f moved MODULE_INIT_QOM to
way before MODULE_INIT_MACHINE, thereby breaking assumptions made in
spice-core.c which registered both a type initializer and a machine
intializer.
This fix removes the type registration, and replaces it with calling
qemu_spice_init in vl.c after command line parsing (second pass) is
done, and after timers are armed, required by spice server.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The constructors for QOM TYPE_INTERFACE were executed rather late in
vl.c's main(). Call them very early so that QOM can safely be used for
machines and CPUs.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To properly load cpudefs using -readconfig, we have to call
cpudef_init() after finishing the command-line option handling.
Consequently, the handling of "-cpu ?" has to be done after the
command-line option handling loop, too.
Without this patch, "-readconfig configfile -cpu ?" fails to list the
CPU definitions read from 'configfile'.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If compiled with CONFIG_FDT, allow user to specify a device tree file using
the -dtb argument. If the machine supports it then the dtb will be loaded
into memory and passed to the kernel on boot.
Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
[Peter Maydell: Use machine opt rather than global to pass dtb filename]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When creating an USB device the old way, there is no way to specify the
target bus. Thus the warning issued by usb_create makes no sense and
rather confuses our users.
Resolve this by passing a bus reference to the usbdevice_init handler
and letting those handlers forward it to usb_create.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix a bug (introduced in commit a0abe47) where a command line which
specified no machine arguments (either explicitly or implicitly via
-kernel &co) would result in a segfault because of a NULL pointer
returned from qemu_opts_find(qemu_find_opts("machine"), 0).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Send qmp events on suspend and wakeup so libvirt
has a chance to track the vm state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds some infrastructure to handle suspend and resume to
qemu. First there are two functions to switch state and second there
is a suspend notifier:
* qemu_system_suspend_request is supposed to be called when the
guest asks for being be suspended, for example via ACPI.
* qemu_system_wakeup_request is supposed to be called on events
which should wake up the guest.
* qemu_register_suspend_notifier can be used to register a notifier
which will be called when the guest is suspended. Machine types
and device models can hook in there to modify state if needed.
* qemu_register_wakeup_notifier can be used to register a notifier
which will be called when the guest is woken up. Machine types
and device models can hook in there to modify state if needed.
* qemu_system_wakeup_enable can be used to enable/disable wakeup
events.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stash away the option argument with add_device_config(), so we still
have its location when we get around to parsing it.
This doesn't improve any messages I can see just yet, but that'll
change shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These are -bt, -serial, -virtcon, -parallel, -debugcon, -usbdevice.
Improves messages emitted via proper error reporting interfaces. For
instance:
$ qemu-system-x86_64 -nodefaults -S -usb -usbdevice net:vlan=xxx
qemu-system-x86_64: Parameter 'vlan' expects a number
becomes:
qemu-system-x86_64: -usbdevice net:vlan=xxx: Parameter 'vlan' expects a number
Many more remain unimproved, because they're fprintf()ed. The next
few commits will take care of that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Increase the width of the column used for the machine name in
the "-M ?" output from 10 to 20 spaces. This fixes the formatting
so it looks nice for architectures where a few of the machines
have overly long names. (Our current longest machine name is
"petalogix-s3adsp1800" with "realview-eb-mpcore" not far behind.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Make kernel, initrd, append be machine opts (ie -machine kernel=foo)
with the old plain command line arguments as legacy/convenience
equivalents.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Notifiers do not need to access both ends of the list, and using
a QLIST also simplifies the API.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/trivial-patches:
linux-user: brk() debugging
virtio: Remove unneeded g_free() check in virtio_cleanup()
net: remove extra spaces in help messages
fmopl: Fix typo in function name
vl.c: Fix typo in variable name
ide: fix compilation errors when DEBUG_IDE is set
cpu-exec.c: Correct comment about this file and indentation cleanup
CODING_STYLE: Clarify style for enum and function type names
linux-user: fail execve() if env/args too big
Make the "machine" option list use list merging, so that multiple
-machine arguments (and the -enable-kvm argument) all merge together
into a single list. Drop the calls to qemu_opts_reset() which meant
that only the last -machine or -enable-kvm option had any effect.
This fixes the bug where "-enable-kvm -machine foo" would ignore
the '-enable-kvm' option, and "-machine foo -enable-kvm" would
ignore the '-machine foo' option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
* kwolf/for-anthony:
AHCI: Masking of IRQs actually masks them
sheepdog: fix co_recv coroutine context
AHCI: Fix port reset race
rewrite QEMU_BUILD_BUG_ON
qcow2: Keep unknown header extension when rewriting header
qcow2: Update whole header at once
vpc: Round up image size during fixed image creation
vpc: Add support for Fixed Disk type
iSCSI: add configuration variables for iSCSI
qemu-io: add write -z option for bdrv_co_write_zeroes
qed: add .bdrv_co_write_zeroes() support
qed: replace is_write with flags field
block: perform zero-detection during copy-on-read
block: add .bdrv_co_write_zeroes() interface
cutils: extract buffer_is_zero() from qemu-img.c
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix a typo in a local variable name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds configuration variables for iSCSI to set
initiator-name to use when logging in to the target,
which type of header-digest to negotiate with the target
and username and password for CHAP authentication.
This allows specifying a initiator-name either from the command line
-iscsi initiator-name=iqn.2004-01.com.example:test
or from a configuration file included with -readconfig
[iscsi]
initiator-name = iqn.2004-01.com.example:test
header-digest = CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
user = CHAP username
password = CHAP password
If you use several different targets, you can also configure this on a per
target basis by using a group name:
[iscsi "iqn.target.name"]
...
The configuration file can be read using -readconfig.
Example :
qemu-system-i386 -drive file=iscsi://127.0.0.1/iqn.ronnie.test/1
-readconfig iscsi.conf
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In some cases initializing the alarm timers can lead to non-negligable
overhead from programs that link against qemu-tool.o. At least,
setting a max-resolution WinMM alarm timer via mm_start_timer() (the
current default for Windows) can increase the "tick rate" on Windows
OSs and affect frequency scaling, and in the case of tools that run
in guest OSs such has qemu-ga, the impact can be fairly dramatic
(+20%/20% user/sys time on a core 2 processor was observed from an idle
Windows XP guest).
This patch doesn't address the issue directly (not sure what a good
solution would be for Windows, or what other situations it might be
noticeable), but it at least limits the scope of the issue to programs
that "opt-in" to using the main-loop.c functions by only enabling alarm
timers when qemu_init_main_loop() is called, which is already required
to make use of those facilities, so existing users shouldn't be
affected.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
So far we overwrite the machine options completely with defaults if no
accel=value is provided. More user friendly is to fill in only
unspecified options. The new qemu_opts_set_defaults enables this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow to configure the MC146818 RTC via the new lost tick policy
property and replace rtc_td_hack with this mechanism.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-kvm/uq/master:
kvm: Activate in-kernel irqchip support
kvm: x86: Add user space part for in-kernel IOAPIC
kvm: x86: Add user space part for in-kernel i8259
kvm: x86: Add user space part for in-kernel APIC
kvm: x86: Establish IRQ0 override control
kvm: Introduce core services for in-kernel irqchip support
memory: Introduce memory_region_init_reservation
ioapic: Factor out base class for KVM reuse
ioapic: Drop post-load irr initialization
i8259: Factor out base class for KVM reuse
i8259: Completely privatize PicState
apic: Open-code timer save/restore
apic: Factor out base class for KVM reuse
apic: Introduce apic_report_irq_delivered
apic: Inject external NMI events via LINT1
apic: Stop timer on reset
kvm: Move kvmclock into hw/kvm folder
msi: Generalize msix_supported to msi_supported
hyper-v: initialize Hyper-V CPUID leaves.
hyper-v: introduce Hyper-V support infrastructure.
Conflicts:
Makefile.target
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Improve VGA selection logic, push check for device availabilty to vl.c.
Create the devices at board level unconditionally.
Remove now unused pci_try_create*() functions.
Make PCI VGA devices optional.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
KVM is forced to disable the IRQ0 override when we run with in-kernel
irqchip but without IRQ routing support of the kernel. Set the fwcfg
value correspondingly. This aligns us with qemu-kvm.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Add option to use named socket for communicating between proxy helper
and qemu proxy FS. Access to socket can be given by using command line
options -u and -g.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Add new proxy filesystem driver to add root privilege to qemu process.
It needs a helper process to be started by root user.
Following command line can be used to utilize proxy filesystem driver
-virtfs proxy,id=<id>,mount_tag=<tag>,socket_fd=<socket-fd>
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This remove all conditional code from common code path and
make opt validation a FSDriver callback.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
qemu-kvm passes numa/SRAT topology information for smp_cpus to SeaBIOS. However
SeaBIOS always expects to setup max_cpus number of SRAT cpu entries
(MaxCountCPUs variable in build_srat function of Seabios). When qemu-kvm runs
with smp_cpus != max_cpus (e.g. -smp 2,maxcpus=4), Seabios will mistakenly use
memory SRAT info for setting up CPU SRAT entries for the offline CPUs. Wrong
SRAT memory entries are also created. This breaks NUMA in a guest.
Fix by setting up SRAT info for max_cpus in qemu-kvm.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
since commit f9b29ca03 included in release 2.31 (docs below say 2.32 but
that is not correct) and onwards g_thread_init is deprecated and calling
it is not required:
http://developer.gnome.org/glib/unstable/glib-Deprecated-Thread-APIs.html#g-thread-init
g_thread_init has been deprecated since version 2.32 and should not be
used in newly-written code. This function is no longer necessary. The
GLib threading system is automatically initialized at the start of your
program.
Fixes bulid failure when warnings are treated as errors on fedora 17.
I only tested the change to vl.c, and copy pasted to the two other
locations (couldn't decide if a wrapper for calling g_thread_init is
uglier).
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The peripheral[-anon] containers are initialized lazily but since they sit on
sysbus, they can not be created after realize. This was causing an abort() to
occur during hotplug if no -device option was used.
This was spotted by qemu-test::device-add.sh
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only print options in the help output that are accepted by our arch.
This is less confusing for users and also for other programs that
consume the help output.
The options affected are:
-g and -prom-env only displayed on PPC or SPARC
-win2k-hack, -rtc-td-hack, -no-fd-bootchk, -no-acpi, -no-hpet,
-acpitable, -smbios only displayed on i386
-semihosting only displayed on ARM, M68K or XTENSA
-old-param only displayed on ARM
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In vl.c and qemu-options.h we define macros and include qemu-options.def
in order to generate different content. Move the bulk of the def'ing and
undef'ing into a wrapper, this will make it cleaner when we add another
macro in the next patch.
AFAICS undefining GEN_DOCS services no purpose, but I've left it for now.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In help() we do what boils down to:
printf("%s", "qemu");
This seems to be an artifact of be995c2764
("removed unused code"), which removed some ifdef'ery that used to print
a different name depending on CONFIG_SOFTMMU.
Instead print the actual program name, originally from argv[0].
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
strtosz_suffix() fails unless the size is followed by 0, whitespace or
','. Useless here, because we need to fail for any junk following the
size, even if it starts with whitespace or ','. Check manually.
Things like "-m 1024," are now caught.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
strtosz_suffix() fails unless the size is followed by 0, whitespace or
','. Useless here, because we need to fail for any junk following the
size, even if it starts with whitespace or ','. Check manually.
Things like
-smp 4 -numa "node,mem=1024,cpus=0-1" -numa "node,mem=1024 cpus=2-3"
are now caught. Before, the second -numa's argument was silently
interpreted as just "node,mem=1024".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With -icount, The vm_clock is updated with help from TCG (it counts
instructions at 2^ICOUNT ns/instructions). With KVM, the instruction
count is not available so KVM cannot provide this help.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
machine defaults to find_default_machine(),
then gets overridden via -M and machine_parse().
If no -M is specified and find_default_machine() returns NULL
(when no machine compiled in), exit with an error.
Avoids a segfault when setting machine->max_cpus.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
g_strdup() can't fail, remove assertion. Assert its argument can't be
null, because that's not obvious (add_boot_device_path() ensures it).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The caller of qemu_timedate_diff() does not expect that tm it passes to
the function will be modified, but mktime() is destructive and modifies
its argument. Pass a copy of tm to it and set tm_isdst so that mktime()
will not rely on it since its value may be outdated.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
GThread-ERROR **: GThread system may only be initialized once.
aborting...
Making the g_thread_init() call in vl.c conditional resolves an abort on
Mac OS X, where coroutine-gthread.c seems to call it before vl.c.
Reported-by: Juan Pineda <juan@logician.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Daniel P. Berrange <berrange@redhat.com>
This patch create a synthetic file system with mount tag
v_synth when -virtfs_synth command line option is specified
in qemu. The synthetic file system can be mounted in guest
using 9p using the below command line
mount -t 9p -oversion=9p2000.L,trans=virtio v_synth <mountpint>
Synthetic file system enabled different qemu subsystem to register
callbacks for read and write events from guest. The subsystem
can create directories and files in the synthetic file system as show
in ex below
qemu_v9fs_synth_mkdir(NULL, 0777, "test2", &node);
qemu_v9fs_synth_add_file(node, 0777, "testfile",
my_test_read, NULL, NULL);
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
A new fsdev parameter "readonly" is introduced to control accessing 9p export.
"readonly" can be used to specify the access type. By default "rw" access
is given to 9p export.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Previous commits dropped most qobjects usage from qemu modules
(now they are a low level interface used by the QAPI). However,
some modules still include the qemu-objects.h header file.
This commit drops qemu-objects.h from some of those modules
and includes qjson.h instead, which is what they actually need.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It should be a matter of allowing the transition POSTMIGRATE ->
FINISH_MIGRATE, but it turns out that the VM won't do the
transition the second time because it's already stopped.
So this commit also adds vm_stop_force_state() which performs
the transition even if the VM is already stopped.
While there also allow other states to migrate.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The user may already have paused the VM before starting the
migration process. If s/he does that, then the state will be
'paused' when we finish the migration process. In that case
we want to transition from 'paused' to 'postmigrate' as the
latter is now the real reason why the VM is stopped.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We flush coalesced MMIO in the device models now, and VNC - for which
this was once introduced - is also fine without it as it has its own
refresh timer.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is conceptually cleaner and will allow us to drop the nographic
timer. Moreover, it will be mandatory to fully exploit future per-device
coalesced MMIO rings.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
writeout=immediate implies the after pwritev we do a sync_file_range.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Please, note that the RunState type as defined in sysemu.h and its
runstate_as_string() function are being dropped in favor of the
RunState type generated by the QAPI.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Next commit will convert the query-status command to use the
RunState type as generated by the QAPI.
In order to "transparently" replace the current enum by the QAPI
one, we have to make some changes to some enum values.
As the changes are simple renames, I'll do them in one shot. The
changes are:
- Rename the prefix from RSTATE_ to RUN_STATE_
- RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM
- RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE
- RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR
- RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE
- RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH
- RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE
- RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM
- RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The QAPI framework won't generate it, so we need to get rid of it.
In order to do that, this commit makes RSTATE_PRE_LAUNCH the initial
state and change qemu_vmstop_requested() to use RSTATE_MAX.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The stop reason is returned in the RunState argument. This is a
preparation for a future commit which will convert the query-status
command to the QAPI.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
On signals such as SIGTERM qemu should exit instead of just stopping the VM
even with -no-shutdown.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This new key reports the current VM status to clients. Please, check
the documentation being added in this commit for more details.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We have two states where issuing cont before system_reset can
cause problems: RSTATE_SHUTDOWN (when -no-shutdown is used) and
RSTATE_PANICKED (which only happens with kvm).
This commit fixes that by doing the following when state is
RSTATE_SHUTDOWN or RSTATE_PANICKED:
1. returning an error to the user/client if cont is issued
2. automatically transition to RSTATE_PAUSED during system_reset
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Test against RSTATE_IN_MIGRATE instead.
Please, note that the RSTATE_IN_MIGRATE state is only set when all the
initial VM setup is done, while 'incoming_expected' was set right in
the beginning when parsing command-line options. Shouldn't be a problem
as far as I could check.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
