When translating between host and target signal numbers keep negative
numbers unchanged, avoiding access beyond array bounds.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 878v2b8sek.fsf@igel.home
This allows to pass the device name.
You can test this with the "route" command.
WITHOUT this patch:
$ sudo route add -net default gw 10.0.3.1 eth0
SIOCADDRT: Bad address
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Ifa
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth
WITH this patch:
$ sudo route add -net default gw 10.0.3.1 eth0
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Ifa
0.0.0.0 10.0.3.1 0.0.0.0 UG 0 0 0 eth
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Some applications use /proc/$$/... (where $$ is the own pid) instead of
/proc/self/... to refer to their own proc files. Extend the interception
for open and readlink to handle this case. Also, do the same interception
in readlinkat.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
# By Michael S. Tsirkin (2) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
kvmclock: clock should count only if vm is running
pci-assign: remove the duplicate function name in debug message
kvm: skip system call when msi route is unchanged
kvm: zero-initialize KVM_SET_GSI_ROUTING input
kvm: add detail error message when fail to add ioeventfd
Message-id: 1372841072-22265-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
kvmclock should not count while vm is paused, because:
1) if the vm is paused for long periods, timekeeping
math can overflow while converting the (large) clocksource
delta to nanoseconds.
2) Users rely on CLOCK_MONOTONIC to count run time, that is,
time which OS has been in a runnable state (see CLOCK_BOOTTIME).
Change kvmclock driver so as to save clock value when vm transitions
from runnable to stopped state, and to restore clock value from stopped
to runnable transition.
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While DEBUG() already includes the function name.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some guests do a large number of mask/unmask
calls which currently trigger expensive route update
system calls.
Detect that route in unchanged and skip the system call.
Reported-by: "Zhanghaoyu (A)" <haoyu.zhang@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
kvm_add_routing_entry makes an attempt to
zero-initialize any new routing entry.
However, it fails to initialize padding
within the u field of the structure
kvm_irq_routing_entry.
Other functions like kvm_irqchip_update_msi_route
also fail to initialize the padding field in
kvm_irq_routing_entry.
It's better to just make sure all input is initialized.
Once it is, we can also drop complex field by field assignment and just
do the simple *a = *b to update a route entry.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
I try to hotplug 28 * 8 multiple-function devices to guest with
old host kernel, ioeventfds in host kernel will be exhausted, then
qemu fails to allocate ioeventfds for blk/nic devices.
It's better to add detail error here.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
# By Alexander Graf (12) and others
# Via Alexander Graf
* agraf/ppc-for-upstream: (32 commits)
PPC: Ignore writes to L2CR
mac-io: Add escc-legacy memory alias region
PPC: Newworld: Add second uninorth control register set
PPC: Newworld: Add uninorth token register
PPC: Add clock-frequency export for Mac machines
PPC: Introduce an alias cache for faster lookups
PPC: Fix GDB read on code area for PPC6xx
PPC: Add dump_mmu() for 6xx
target-ppc: Introduce unrealizefn for PowerPCCPU
booke_ppc: limit booke timer to max when timeout overflow
Graphics: Switch to 800x600x32 as default mode
pseries: Update MAINTAINERS information
target-ppc kvm: save cr register
pseries: Fix compiler warning (conversion of pointer to integral value)
spapr-rtas: add CPU argument to RTAS calls
target-ppc: Change default machine for 64-bit
ppc: do not register IABR SPR twice for 603e
target-ppc: Drop redundant flags assignments from CPU families
mpc8544_guts: Turn qdev initfn into instance_init
mpc8544_guts: QOM'ify
...
Message-id: 1372556709-23868-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Cornelia Huck
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
virtio-ccw: fix build breakage on windows
Message-id: 1372669523-4039-1-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
event_notifier_get_fd() is not available on windows hosts. Fix this by
moving the calls to event_notifier_get_fd() to the kvm code.
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The L2CR register contains a number of bits that either impose configuration
which we can't deal with or mean "something is in progress until the bit is
0 again".
Since we don't model the former and we do want to accomodate guests using the
latter semantics, let's just ignore writes to L2CR. That way guests always read
back 0 and are usually happy with that.
Signed-off-by: Alexander Graf <agraf@suse.de>
Mac OS X's debugging serial driver accesses the ESCC through a different
register layout, called "escc-legacy". This layout differs from the normal
escc register layout purely by the location of the respective registers.
This patch adds a memory alias region that takes normal escc registers and
maps them into the escc-legacy register space.
With this patch applied, a Mac OS X guest successfully emits debug output
on the serial port when run with debug parameters set, for example by running:
$ qemu-system-ppc -prom-env -'boot-args=-v debug=0x8 io=0xff serial=0x3' \
-cdrom 10.4.iso -boot d
Signed-off-by: Alexander Graf <agraf@suse.de>
Mac OS X requires a second uninorth register set to be mapped a few
bytes above the first one. Let's just expose it to make it happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Mac OS X expects the uninorth control register set to contain one
register that always reads back what it writes in. Expose that.
This is just a temporary hack. Eventually, we want to expose the
uninorth (/uni-n in device tree) as a separate QOM device.
Signed-off-by: Alexander Graf <agraf@suse.de>
Support in fwcfg has been around for exposure of the clock-frequency
CPU property. OpenBIOS reads it, we just never exposed it.
Since Mac OS X is very picky about its clock frequency values, let's
just take a known good value and always expose that.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
When running QEMU with "-cpu ?" we walk through every alias for every
target CPU we know about. This takes several seconds on my very fast
host system.
Let's introduce a class object cache in the alias table. Using that we
don't have to go through the tedious work of finding our target class.
Instead, we can just go directly from the alias name to the target class
pointer.
This patch brings -cpu "?" to reasonable times again.
Before:
real 0m4.716s
After:
real 0m0.025s
Signed-off-by: Alexander Graf <agraf@suse.de>
On PPC 6xx, data and code have separated TLBs. Until now QEMU was only
looking at data TLBs, which is not good when GDB wants to read code.
This patch adds a second call to get_physical_address() with an
ACCESS_CODE type of access when the first call with ACCESS_INT fails.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
"(qemu) info tlb" is a very useful tool for debugging, so I implemented
the missing 6xx version.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
[agraf: fix printfs on hwaddr to PRI]
Signed-off-by: Alexander Graf <agraf@suse.de>
Use it to clean up the opcode table, resolving a former TODO from Jocelyn.
Also switch from malloc() to g_malloc().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Limit watchdog and fit timer to maximum timeout value which
qemu timer can support (INT64_MAX). This maximum timeout will be
hundreds of years, so limiting to max timeout is pretty safe.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We have stayed at 800x600x15 as default graphics mode for the last 9 years.
If there ever was a reason to be there, surely nobody remembers it.
However, recently non-Linux PPC guests started to show bad effects on 15 bit
color mode. They do work just fine with 32 bits however.
So let's switch to 32 bit color as the default graphic mode.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
I'm no longer at IBM, and therefore no long actively working on the pseries
(aka sPAPR) qemu machine type. This patch removes my information in the
MAINTAINERS file.
While we're at it, I've added some extra file patterns for pseries specific
files that weren't included in the existing pattern.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: Remove new maintainer addition]
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a missing code to save CR (condition register) via
kvm_arch_put_registers(). kvm_arch_get_registers() already has it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This kind of type cast must use uintptr_t or target_ulong to be portable
for hosts with sizeof(void *) != sizeof(long).
Here the value is assigned to a variable of type target_ulong.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
RTAS is a hypervisor provided binary blob that a guest loads and
calls into to execute certain functions. It's similar to the
vsyscall page in Linux or the short lived VMCI paravirt interface
from VMware.
The QEMU implementation of the RTAS blob is simply a passthrough
that proxies all RTAS calls to the hypervisor via an hypercall.
While we pass a CPU argument for hypercall handling in QEMU, we
don't pass it for RTAS calls. Since some RTAs calls require
making hypercalls (normally RTAS is implemented as guest code) we
have nasty hacks to allow that.
Add a CPU argument to RTAS call handling so we can more easily
invoke hypercalls just as guest code would.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, for qemu-system-ppc64, the default machine type is 'mac99'.
The mac99 machine is not being actively maintained, and represents a
bizarre hybrid of components that never actually existed as a real system.
This patch changes the default machine to 'pseries', which is actively
maintained and works well with most modern ppc64 Linux distributions as a
guest.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: adjust commit message]
Signed-off-by: Alexander Graf <agraf@suse.de>
IABR SPR is already registered in gen_spr_603(), called from init_proc_603E().
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Previous code has #define POWERPC_INSNS2_<family> PPC_NONE in some
places for macrofied assignment to insns_flags2 field.
PPC_NONE is defined as zero though and QOM classes are zero-initialized,
so drop any pcc->insns_flags2 = PPC_NONE; assignments.
PPC_NONE itself is still in use in translate.c.
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
SysBus can deal with NULL SysBusDeviceClass::init since 4ce5dae.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce type constant, cast macro and rename parent field.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Split qdev initfn into instance_init and realize functions.
Change one occurrence of "klass" while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce type constant and cast macro.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enables support for the in-kernel MPIC that thas been merged into the
KVM next branch. This includes irqfd/KVM_IRQ_LINE support from Alex
Graf (along with some other improvements).
Note from Alex regarding kvm_irqchip_create():
On x86, one would call kvm_irqchip_create() to initialize an
in-kernel interrupt controller. That function then goes ahead and
initializes global capability variables as well as the default irq
routing table.
On ppc, we can't call kvm_irqchip_create() because we can have
different types of interrupt controllers. So we want to do all the
things that function would do for us in the in-kernel device init
handler.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build,
fix ppcemb]
Signed-off-by: Alexander Graf <agraf@suse.de>
There are cases where a kvm provided function is called from generic
hw code that doesn't know whether kvm is available or not. Provide
a stub file which can provide simple replacement functions for those
cases.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The current logic updates KVM's view of our interrupt map every time we
change it. While this is nice and bullet proof, it slows things down
badly for me. QEMU spends about 3 seconds on every start telling KVM what
news it has on its routing maps.
Instead, let's just synchronize the whole irq routing map as a whole when
we're done constructing it. For things that change during runtime, we can
still update the routing table on demand.
Signed-off-by: Alexander Graf <agraf@suse.de>
KVM in-kernel MPIC support is going to expand this even more,
so let's keep it contained.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The usual MSI injection mechanism writes msi.data into memory using an
le32 wrapper. So on big endian guests, this swaps msg.data into the
expected byte order.
For irqfd however, we don't swap the payload right now, rendering
in-kernel MPIC emulation broken on PowerPC.
Swap msg.data to the correct endianness whenever we touch it.
Signed-off-by: Alexander Graf <agraf@suse.de>
On PPC, we can have different types of interrupt controllers, so we really
only know that we are going to use one when we created it.
Export kvm_init_irq_routing() to common code, so that we don't have to call
kvm_irqchip_create().
Signed-off-by: Alexander Graf <agraf@suse.de>
On PPC, we don't support MP state. So far it's not necessary and I'm
not convinced yet that we really need to support it ever.
However, the current idle logic in QEMU assumes that an in-kernel PIC
also means we support MP state. This assumption is not true anymore.
Let's split up the two cases into two different variables. That way
PPC can expose an in-kernel PIC, while not implementing MP state.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Jan Kiszka <jan.kiszka@siemens.com>
# By Gerd Hoffmann (13) and Michael Tokarev (1)
# Via Michael Tokarev
* mjt/trivial-patches:
doc: we use seabios, not bochs bios
qemu-socket: don't leak opts on error
qemu-char: report udp backend errors
qemu-char: add -chardev mux support
qemu-char: minor mux chardev fixes
qemu-char: use ChardevBackendKind in CharDriver
qemu-char: don't leak opts on error
qemu-char: fix documentation for telnet+wait socket flags
qemu-char: print notification to stderr
qemu-char: use more specific error_setg_* variants
qemu-char: check optional fields using has_*
qemu-socket: catch monitor_get_fd failures
qemu-socket: drop pointless allocation
qemu-socket: zero-initialize SocketAddress
Message-id: 1372443465-22384-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
HMP is meant for humans and you should notice it.
This changes the output format to use a bit more space to display the
information more readable and leaves out irrelevant information (e.g.
mention only that an image is encrypted, but not when it's not; display
I/O limits only if throttling is in effect; ...)
Before:
(qemu) info block
ide0-hd0: removable=0 io-status=ok file=/tmp/overlay.qcow2
backing_file=/tmp/backing.img backing_file_depth=1 ro=0 drv=qcow2
encrypted=1 bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0
ide1-cd0: removable=1 locked=0 tray-open=0 io-status=ok
file=/home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso ro=1
drv=raw encrypted=0 bps=0 bps_rd=0 bps_wr=0 iops=0 iops_rd=0 iops_wr=0
floppy0: removable=1 locked=0 tray-open=0 [not inserted]
sd0: removable=1 locked=0 tray-open=0 [not inserted]
After:
(qemu) info block
ide0-hd0: /tmp/overlay.qcow2 (qcow2, encrypted)
Backing file: /tmp/backing.img (chain depth: 1)
I/O limits: bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0
ide1-cd0: /home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso (raw, read-only)
Removable device: not locked, tray closed
floppy0: [not inserted]
Removable device: not locked, tray closed
sd0: [not inserted]
Removable device: not locked, tray closed
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 2c5f488 introduced qapi-based character device initialization
as a new code path in qemu_chr_new_from_opts(). Unfortunately, it
failed to store parameter opts in the new chardev. Therefore,
qemu_chr_delete() doesn't delete it. Even though the device is gone,
its options linger, and any attempt to create another one with the
same ID fails.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1372339512-28149-1-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Put them named "console[$index]" below "/backend", so you can
list & inspect them via QMP.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1372150171-8707-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also use CAIRO_FORMAT_RGB24 unconditionally. DisplaySurfaces will never
ever see 8bpp surfaces. And using CAIRO_FORMAT_RGB16_565 for the 16bpp
case doesn't seem to be a good idea too.
<quote src="/usr/include/cairo/cairo.h">
* @CAIRO_FORMAT_RGB16_565: This format value is deprecated. It has
* never been properly implemented in cairo and should not be used
* by applications. (since 1.2)
</quote>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1372150134-8590-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
