Use movcond for all sorts of conditional moves, ABS, CLAMPS, MIN/MAX
opcodes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The Miscellaneous Special Registers Option provides zero to four scratch
registers within the processor readable and writable by RSR, WSR, and
XSR. These registers are privileged. They may be useful for some
application-specific exception and interrupt processing tasks in the
kernel. The MISC registers are undefined after reset.
See ISA, 4.7.3 for details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There are read-only (DEBUGCAUSE, PRID) and write-only (INTCLEAR) SRs,
and INTERRUPT/INTSET SR allows rsr/wsr, but not xsr. Raise illeagal
opcode exception on illegal access to these SRs.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Beginning with the RA-2004.1 release, SR access instructions (rsr, wsr,
xsr) are associated with their corresponding SR and raise illegal opcode
exception in case the register is not configured for the core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In XEA1, the Options for Memory Protection and Translation and the
corresponding TLB management instructions are not available. Instead,
functionality similar to the Region Protection Option is available
through the cache attribute register. See ISA, A.2.14 for details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
ATOMCTL SR controls s32c1i opcode behavior depending on targeted memory
type. See ISA, 4.3.12.4 for details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Now that "and" with 0xff, 0xffff and 0xffffffff and "shr" with 0 shift
are optimized in tcg/tcg-op.h there is no need to do it in
target-xtensa/translate.c.
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case Coprocessor Context option is enabled CPENABLE SR bits control
whether access to coprocessors is allowed or would rise one of
CoprocessorXDisabled exceptions.
See ISA, 4.4.5 for more details.
FP is coprocessor 0.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are comparison and conditional move opcodes.
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are FP to integer and integer to FP conversion opcodes.
See ISA, 4.3.10 for more details.
Note that ISA description for utrunc.s is currently incorrect and will
be fixed in future revisions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are FP arithmetic opcodes.
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are load/store instructions for FP registers with immediate or
register index and optional base post-update.
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There are 16 32-bit FP registers (f0 - f15), control and status user
registers (fcr, fsr).
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Unconditional gen_check_loop_end at the end of disas_xtensa_insn
can emit tcg_gen_goto_tb with slot id already used in the TB (e.g. when
TB ends at LEND with a branch).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: malc <av1474@comtv.ru>
Quote from ISA, 2.1:
For most Xtensa instructions, bit numbering is irrelevant; only the BBC
and BBS instructions assign bit numbers to values on which the processor
operates. The BBC/BBS instructions use big-endian bit ordering (0 is the
most-significant bit) on a big-endian processor configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add env parameter to every helper function that needs it, update
'configure' script.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Taken conditional branches fail to update CCOUNT register because
accumulated ccount_delta is reset during translation of non-taken
branch. To fix it only update CCOUNT once per conditional branch
instruction translation.
This fixes guest linux freeze on LTP waitpid06 test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Translation of LOOP instructions used to call LEND SR write handler to
update LEND and invalidate relevant TBs. Now that LEND SR write handler
ends TB, LOOPNEZ and LOOPGTZ generate wrong code (same as for simple
LOOP). Fix it by calling wsr_lend helper directly.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instruction breakpoint/zero overhead loop handling code is built into
TBs pointed to by IBREAKA/LEND SRs. When these or related SRs get
changed TBs at virtual addresses corresponding to their old and their
new values must be invalidated.
Virtual address range is passed to the tb_invalidate_phys_page_range,
which is incorrect in system emulation mode.
To fix it use guest TLB/MMU to translate virtual address to physical
address.
However the guest may not have virtual-to-physical mapping at the moment
of IBREAKA/LEND change, thus this fix is not 100% accurate.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Provides a file naming scheme consistent with other targets.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Scripted conversion:
sed -i "s/CPUState/CPUXtensaState/g" target-xtensa/*.[hc]
sed -i "s/#define CPUXtensaState/#define CPUState/" target-xtensa/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Add DBREAKA/DBREAKC SRs and implement DBREAK breakpoints as debug
watchpoints.
This implementation is not fully compliant to ISA: when a breakpoint is
set to an unmapped/inaccessible memory address it generates TLB/memory
protection exception instead of debug exception.
See ISA, 4.7.7.3, 4.7.7.6 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
ICOUNT SR gets incremented on every instruction completion provided that
CINTLEVEL at the beginning of the instruction execution is lower than
ICOUNTLEVEL.
When ICOUNT would increment to 0 a debug exception is raised if
CINTLEVEL is lower than DEBUGLEVEL.
See ISA, 4.7.7.5 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add IBREAKA/IBREAKENABLE SRs and implement debug exception, BREAK and
BREAK.N instructions and IBREAK breakpoints.
IBREAK breakpoint address is considered constant for TB lifetime.
On IBREAKA/IBREAKENABLE change corresponding TBs are invalidated.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
DEBUGCAUSE SR holds information about the most recent debug exception.
See ISA, 4.7.7 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This includes opcodes from disabled features and those marked reserved in the ISA.
Also end TB on opcodes that definitely generate an exception: illegal
instructions, syscall and privileged instructions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- add separate options for each operation in the MISC_OP;
- add an option for MULSH/MULUH;
- put S32C1I under conditional store option.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.3.7 for the details.
- add ACC and MR special registers;
- implement MAC16 and all inner MAC* opcode groups.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- TLB opcode group;
- region protection option (ISA, 4.6.3);
- region translation option (ISA, 4.6.4);
- MMU option (ISA, 4.6.5).
Cache control attribute bits are not used by this implementation.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.4.3 for details.
Vector addresses recorded in core configuration are absolute values that
correspond to default VECBASE value.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.7.1.3 for details.
Window check is inserted before commands that push "used register
watermark" beyond its current level. Used register watermark is reset on
instructions that change WINDOW_BASE/WINDOW_START SRs.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.4.6 (interrupt option), 4.4.7 (high priority interrupt
option) and 4.4.8 (timer interrupt option) for details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Tensilica iss provides support for applications running in freestanding
environment through SIMCALL command. It is used by Tensilica libc to
access argc/argv, for file I/O, etc.
Note that simcalls that accept buffer addresses expect virtual addresses.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.4.4 for details.
Correct (aligned as per ISA) address for unaligned access is generated
in case this option is not enabled.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.3.3 for details.
TB flag XTENSA_TBFLAG_LITBASE is used to track enable bit of LITBASE SR.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.3.2 for details.
Operations that change LEND SR value invalidate TBs at the old and at
the new LEND. LEND value at TB compilation time is considered constant
and loop instruction is generated based on this value.
Invalidation may be avoided for the TB at the old LEND address, since
looping code verifies actual LEND value.
Invalidation may be avoided for the TB at the new LEND address if
there's a way to associate LEND address with TB at compilation time and
later verify that it doesn't change.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.7.1 for details.
Physical registers and currently visible window are separate fields in
CPUEnv. Only current window is accessible to TCG. On operations that
change window base helpers copy current window to and from physical
registers.
Window overflow check described in 4.7.1.3 is in separate patch.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- mark privileged opcodes with ring check;
- make debug exception on exception handler entry.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All operations in this group are no-ops, because cache ought to be
transparent to applications. However cache may be abused, then we'll
need to actually implement these opcodes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All operations in this group are no-ops, because there are no delayed
side effects.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reserved opcodes must generate illegal instruction exception. Usually
they signal emulation quality problems.
Not implemented opcodes are good to see.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Special Registers hold the majority of the state added to the processor
by the options. See ISA, 5.3 for details.
User Registers hold state added in support of designer's TIE and in some
cases of options that Tensilica provides. See ISA, 5.4 for details.
Only registers mapped in sregnames or uregnames are considered valid.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- BZ (comparison to zero);
- BI0 (comparison to signed immediate);
- BI1 (comparison to unsigned immediate);
- B (two registers comparison, bit sets comparison);
- BEQZ.N/BNEZ.N (narrow comparison to zero).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instructions with op0 >= 8 are 2 bytes long, others are 3 bytes long.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Set up disas_xtensa_insn switch structure, mark required options on high
level groups. Implement arithmetic/bit logic/jump/call0.
Implement code generation loop with single step/breakpoint checking.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
