This patch fixes linker errors when building QEMU without Linux AIO support.
It is based on suggestions from malc and Kevin Wolf.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove un needed casts from void *.
Use DO_UPCAST() instead of blind casts
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Once there, there is no way that we don't have a PCI Device at save/load time. Remove the check
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently the qemu user-mode networking stack reads the host DNS
configuration (/etc/resolv.conf or the Windows equivalent) only once
when qemu starts. This causes name lookups in the guest to fail if the
host is moved to a different network from which the original DNS servers
are unreachable, a common occurrence when the host is a laptop.
This patch changes the slirp code to read the host DNS configuration on
demand, caching the results for at most 1 second to avoid unnecessary
overhead if name lookups occur in rapid succession. On non-Windows
hosts, /etc/resolv.conf is re-read only if the file has been replaced or
if its size or mtime has changed.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Three problems with our_addr:
- It's determined only once when qemu starts, but the address can change
(just like the DNS configuration can).
- It's supposed to be the IP address of a host network interface, but
there's no guarantee that gethostbyname(gethostname()) actually does
that: the host might be a laptop that has only a loopback interface up,
or the hostname might be localhost.localdomain, etc.
- It's useless at best: get_dns_addr() calls it, there's no reason to
send DNS requests to a different IP address if you're running a DNS
server on the host and resolv.conf points to 127.0.0.1.
These problems are easily solved by removing the code.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With that patch applied "-balloon virtio,args" becomes a shortcut for
"-device virtio-balloon-pci,args".
Side effects:
- ballon device gains support for id=<tag>.
- ballon device is off by default now.
- initialization order changes, which may in different pci slot
assignment depending on the VM configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
create ide-microdrive.c and place microdrive support there.
only build ide-microdrive support for platforms using it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
create ide-mmio.c and place mmio support there.
only build ide-mmio support for platforms using it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
create ide-macio.c and place macio support there.
only build ide-macio support for platforms using it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
create ide-pci.c and place pci bus support there.
only build ide-pci support for platforms using it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix build (merge with isa mmio split)
create ide-isa.c and place isa bus support there.
only build ide-isa support for platforms using it.
also create ide.h header file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
move lots of IDE defines to the new file.
also make a bunch of functions non-static
and add declaration for them. Needed by
the following patches of this series.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current IDE code uses an array of two IDEState structs to maintain
the IDE bus. This patch adds a IDEBus to be used instead and does a
bunch of cleanups:
* move ide bus state from IDEState to IDEBus.
* drop a bunch of ugly pointer arithmetics to figure the active
interface, explicitly save the interface number instead.
* add helper functions to save/restore idebus state.
It also fixes a save/restore bug: loadvm allways stores the command in
the master's IDEState, even when it was saved from the slave.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use the new qemu_error() function for virtio-blk-pci.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds some functions for error reporting to address the
problem that error messages should be routed to different destinations
depending on the context of the caller, i.e. monitor command errors
should go to the monitor, command line errors to stderr.
qemu_error() is a printf-like function to report errors.
qemu_errors_to_file() and qemu_errors_to_mon() switch the destination
for the error message to the specified file or monitor. When setting a
new destination the old one will be kept. One can switch back using
qemu_errors_to_previous(). i.e. it works like a stack.
main() calls qemu_errors_to_file(stderr), so errors go to stderr by
default. monitor callbacks are wrapped into qemu_errors_to_mon() +
qemu_errors_to_previous(), so any errors triggered by monitor commands
will go to the monitor.
Each thread has its own error message destination. qemu-kvm probably
should add a qemu_errors_to_file(stderr) call to the i/o-thread
initialization code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device init
callbacks can't signal failure because the init() callback has no
return value. This patch fixes it.
We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault. This patch fixes it.
With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hello,
the real world issue is that the hardware allows sends up to 2600 bytes,
and for some reason FreeBSD sometimes sends frames larger than the
ethernet frame size (102+1460 is the maximum I have seen so far),
overflowing the on-stack tx buffer of the driver.
Independent of that, the code should avoid allowing the guest to
overwrite the stack.
This is a minimal patch to fix the issue (you could leave out the size
change of the buf array as well, networking still seems to work either
way). Obviously there are better ways to handle it, but a proper fix IMO
would involve first getting rid of the code duplication and given the
number of patches pending for that code I see no point in working on that now.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
