virtio_gpu_virgl_get_num_capsets will return "num_capsets", but we can't
assume that capset_index 1 is always VIRGL2 once we'll support more capsets,
like Venus and DRM capsets. Register capsets dynamically to avoid that problem.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-13-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Support BLOB resources creation, mapping, unmapping and set-scanout by
calling the new stable virglrenderer 0.10 interface. Only enabled when
available and via the blob config. E.g. -device virtio-vga-gl,blob=true
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com> # added set_scanout_blob
Signed-off-by: Xenia Ragiadakou <xenia.ragiadakou@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-12-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
virtio_gpu_virgl_init() may fail, leading to a further Qemu crash
because Qemu assumes it never fails. Check virtio_gpu_virgl_init()
return code and don't execute virtio commands on error. Failed
virtio_gpu_virgl_init() will result in a timed out virtio commands
for a guest OS.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-5-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Move print_stats timer to VirtIOGPUGL for consistency with
cmdq_resume_bh and fence_poll that are used only by GL device.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-4-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Move fence_poll timer to VirtIOGPUGL for consistency with cmdq_resume_bh
that are used only by GL device.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-3-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* Fixed GPIO interrupt status when in index mode
* Added GPIO support for the AST2700 SoC and specific test cases
* Fixed crypto controller (HACE) Accumulative hash function
* Converted Aspeed machine avocado tests to the new functional
framework. SDK tests still to be addressed.
* Fixed issue in the SSI controller when doing writes in user mode
* Added support for the WRSR2 register of Winbond flash devices
* Added SFDP table for the Windbond w25q80bl flash device
* Changed flash device models for the ast1030-a1 EVB
-----BEGIN PGP SIGNATURE-----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=DqCH
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20241024' of https://github.com/legoater/qemu into staging
aspeed queue:
* Fixed GPIO interrupt status when in index mode
* Added GPIO support for the AST2700 SoC and specific test cases
* Fixed crypto controller (HACE) Accumulative hash function
* Converted Aspeed machine avocado tests to the new functional
framework. SDK tests still to be addressed.
* Fixed issue in the SSI controller when doing writes in user mode
* Added support for the WRSR2 register of Winbond flash devices
* Added SFDP table for the Windbond w25q80bl flash device
* Changed flash device models for the ast1030-a1 EVB
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmcZ6MIACgkQUaNDx8/7
# 7KFQPA//RTxi1PmCDlzd1ffzMWEadD3CpGLJ4RgEeZpNtkx6IF2uFFBdlNgjTSmD
# B8FdIOVb8qo2omXahKIVIgoKbGgn3U3jciH67D/x4Jyp8IhW6n5XwZzKNJ7kLVHX
# IluGmlvqNumSKl3vxsLvprC0ojRiO/SfWkzS6VOwoFPM7uNDTybQicWBBoy3Jh3e
# VVlMwIeKHMQVJGpI8PQbtnFZO4HaMqWwlo0EoIJji59fdyWULLvrXzH9YhzwFVjQ
# oCNvJUBLfxLse7c13cm/LuNmw+IQtLC5OztsOOtv1XZ1MruhJ7t316eGsQEpeWcD
# Yy5RK4mIBJMExu9oxcKOqgSznQSgenvNGWg6Z9FyyKGciylafnE8GeT35WObumyD
# v9gzgeLcw5DgvDgQXaYi4IkKyezaHoE3HPbFdBEZHBt8tn5pPGmXM0lEWL5xQ5B8
# h6HphjxIlFxeHIxYenLJowLBMOt8aFXzGboF2XCLrx19OC2zvoo7klCbFeAfZpvQ
# JMXP+GsQIe7fnBMbyXGrJh9q+/7tKR4ivtTV/vnSF0FPtyzxdoSrYsUA4SZqSWvI
# ONz62p+zlE/oXBUIaFnC2Ea41YwJ7mDbmcSU1dFxmE0xRVmoYlUocoeS2VOUmTH0
# CMgEcmMXQG0vx8nipQbScbuWRCBlf0YwJ7Y7stgI8HabmsMMbIg=
# =DqCH
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 24 Oct 2024 07:27:14 BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20241024' of https://github.com/legoater/qemu:
test/qtest/aspeed_smc-test: Fix coding style
hw/arm/aspeed: Correct fmc_model w25q80bl for ast1030-a1 EVB
hw/arm/aspeed: Correct spi_model w25q256 for ast1030-a1 EVB.
hw/block/m25p80: Add SFDP table for w25q80bl flash
hw/block:m25p80: Support write status register 2 command (0x31) for w25q01jvq
hw/block:m25p80: Fix coding style
aspeed/smc: Fix write incorrect data into flash in user mode
tests/functional: Convert most Aspeed machine tests
hw/misc/aspeed_hace: Fix SG Accumulative hashing
tests/qtest:ast2700-gpio-test: Add GPIO test case for AST2700
aspeed/soc: Support GPIO for AST2700
aspeed/soc: Correct GPIO irq 130 for AST2700
hw/gpio/aspeed: Add AST2700 support
hw/gpio/aspeed: Fix clear incorrect interrupt status for GPIO index mode
hw/gpio/aspeed: Support different memory region ops
hw/gpio/aspeed: Support to set the different memory size
hw/gpio/aspeed: Fix coding style
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the design of ASPEED SPI controllers user mode, users write the
data to flash, the SPI drivers set the Control Register(0x10) bit 0 and 1
enter user mode. Then, SPI drivers send flash commands for writing data.
Finally, SPI drivers set the Control Register (0x10) bit 2 to stop
active control and restore bit 0 and 1.
According to the design of ASPEED SMC model, firmware writes the
Control Register and the "aspeed_smc_flash_update_ctrl" function is called.
Then, this function verify Control Register(0x10) bit 0 and 1. If it set user
mode, the value of s->snoop_index is SNOOP_START else SNOOP_OFF.
If s->snoop_index is SNOOP_START, the "aspeed_smc_do_snoop" function verify
the first incomming data is a new flash command and writes the corresponding
dummy bytes if need.
However, it did not check the current unselect status. If current unselect
status is "false" and firmware set the IO MODE by Control Register bit 31:28,
the value of s->snoop_index will be changed to SNOOP_START again and
"aspeed_smc_do_snoop" misunderstand that the incomming data is the new flash
command and it causes writing unexpected data into flash.
Example:
1. Firmware set user mode by Control Register bit 0 and 1(0x03)
2. SMC model set s->snoop SNOOP_START
3. Firmware set Quad Page Program with 4-Byte Address command (0x34)
4. SMC model verify this flash command and it needs 4 dummy bytes.
5. Firmware send 4 bytes address.
6. SMC model receives 4 bytes address
7. Firmware set QPI IO MODE by Control Register bit 31. (0x80000003)
8. SMC model verify new user mode by Control Register bit 0 and 1.
Then, set s->snoop SNOOP_START again. (It is the wrong behavior.)
9. Firmware send 0xebd8c134 data and it should be written into flash.
However, SMC model misunderstand that the first incoming data, 0x34,
is the new command because the value of s->snoop is changed to SNOOP_START.
Finally, SMC sned the incorrect data to flash model.
Introduce a new unselect attribute in AspeedSMCState to save the current
unselect status for user mode and set it "true" by default.
Update "aspeed_smc_flash_update_ctrl" function to check the previous unselect
status. If both new unselect status and previous unselect status is different,
update s->snoop_index value and call "aspeed_smc_flash_do_select".
Increase VMStateDescription version.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: - Replaced VMSTATE_BOOL -> VMSTATE_BOOL_V ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Make the Aspeed HACE module use the new qcrypto accumulative hashing functions
when in scatter-gather accumulative mode. A hash context will maintain a
"running-hash" as each scatter-gather chunk is received.
Previously each scatter-gather "chunk" was cached
so the hash could be computed once the final chunk was received.
However, the cache was a shallow copy, so once the guest overwrote the
memory provided to HACE the final hash would not be correct.
Possibly related to: https://gitlab.com/qemu-project/qemu/-/issues/1121
Buglink: https://github.com/openbmc/qemu/issues/36
Signed-off-by: Alejandro Zeise <alejandro.zeise@seagate.com>
[ clg: - Checkpatch fixes
- Reworked qcrypto_hash*() error reports in do_hash_operation() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
It set "aspeed_gpio_ops" struct which containing read and write callbacks
to be used when I/O is performed on the GPIO region.
Besides, in the previous design of ASPEED SOCs, one register is used for
setting one function for 32 GPIO pins.
ex: GPIO000 is used for setting data value for GPIO A, B, C and D in AST2600.
ex: GPIO004 is used for setting direction for GPIO A, B, C and D in AST2600.
However, the register set have a significant change in AST2700.
Each GPIO pin has their own control register. In other words, users are able to
set one GPIO pin’s direction, interrupt enable, input mask and so on
in one register. The aspeed_gpio_read/aspeed_gpio_write callback functions
are not compatible AST2700.
Introduce a new "const MemoryRegionOps *" attribute in AspeedGPIOClass and
use it in aspeed_gpio_realize function.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs, a GPIO controller owns 4KB of
register space for AST2700, AST2500, AST2400 and AST1030; owns 2KB of
register space for AST2600 1.8v and owns 2KB of register space for
AST2600 3.3v.
It set the memory region size 2KB by default and it does not compatible
register space for AST2700.
Introduce a new class attribute to set the GPIO controller memory size
for different ASPEED SOCs.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Because virtio-scsi type devices use a non-architected IPLB pbt code they cannot
be set and stored normally. Instead, the IPLB must be rebuilt during re-ipl.
As s390x does not natively support multiple boot devices, the devno field is
used to store the position in the boot order for the device.
Handling the rebuild as part of DIAG308 removes the need to check the devices
for invalid IPLBs later in the IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-17-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Build an IPLB for any device with a bootindex (up to a maximum of 8 devices).
The IPLB chain is placed immediately before the BIOS in memory. Because this
is not a fixed address, the location of the next IPLB and number of remaining
boot devices is stored in the QIPL global variable for possible later access by
the guest during IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-16-jrossi@linux.ibm.com>
[thuth: Fix endianness problem when accessing the qipl structure]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a loadparm property to the VirtioCcwDevice object so that different
loadparms can be defined on a per-device basis for CCW boot devices.
The machine/global loadparm is still supported. If both a global and per-device
loadparm are defined, the per-device value will override the global value for
that device, but any other devices that do not specify a per-device loadparm
will still use the global loadparm.
It is invalid to assign a loadparm to a non-boot device.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-15-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, structures defined in both hw/s390x/ipl.h and pc-bios/s390-ccw/iplb.h
must be kept in sync, which is prone to error. Instead, create a new directory
at include/hw/s390x/ipl/ to contain the definitions that must be shared.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-14-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
=uk+a
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20241016
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
# 3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
# y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
# ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
# =uk+a
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 16 Oct 2024 09:13:05 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu:
hw/loongarch/fw_cfg: Build in common_ss[]
hw/loongarch/virt: Remove unnecessary 'cpu.h' inclusion
target/loongarch: Avoid bits shift exceeding width of bool type
hw/loongarch/virt: Add FDT table support with acpi ged pm register
acpi: ged: Add macro for acpi sleep control register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240927213254.17552-2-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Macro definition is added for acpi sleep control register, ged emulation
driver can use the macro , also it can be used in FDT table if ged is
exposed with FDT table.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240918014206.2165821-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Have the CPS expose a 'cpu-big-endian' property so it can
set it to the vCPUs it creates.
Note, since the number of vCPUs created is dynamic, we can
not use QOM aliases.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-16-philmd@linaro.org>
The ecc.c code was used only by the PXA2xx and OMAP2 SoC devices,
which we have removed, so it is now completely unused.
Note that hw/misc/eccmemctl.c does not in fact use any of the
code frome ecc.c, so that KConfig dependency was incorrect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-6-peter.maydell@linaro.org
The only PCMCIA subsystem was the PXA2xx SoC and the machines
using it, which have now been removed. Although in theory
we have a few machine types which have PCMCIA (e.g. kzm,
the strongarm machines, sh4's sh7750), none of those machines
implement their PCMCIA controller, and they're all old and
no longer very interesting machine types.
Rather than keeping all the PCMCIA code in-tree without any
active users of it, delete it. If we need PCMCIA in future
we can always resurrect it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241003140010.1653808-5-peter.maydell@linaro.org
The DSCM-1XXXX microdrive device model was used only by the
XScale-based Zaurus machine types. Now they have been removed, we
can delete this device too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-4-peter.maydell@linaro.org
The MAX111X ADC device was used only by the XScale-based
Zaurus machine types. Now they have all been removed, we can
drop this device model too.
Because this device is an SSI device, in theory it could be created
by users on the command line for boards with a different SSI
controller, but we don't believe users are doing this -- it would be
impossible on the command line to connect up the GPIO inputs which
correspond to ADC inputs, or the GPIO output which is an interrupt
line. The only example a web search produces for "device max1111" or
"device max1110" is our own bug report
https://gitlab.com/qemu-project/qemu/-/issues/2228
where it's used as an example of a bogus command that causes an
assertion in an aspeed machine type that wasn't expecting anything
other than flash devices on its SMC bus.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-2-peter.maydell@linaro.org
Currently the QemuLockCnt data structure and associated functions are
in the include/qemu/thread.h header. Move them to their own
qemu/lockcnt.h. The main reason for doing this is that it means we
can autogenerate the documentation comments into the docs/devel
documentation.
The copyright/author in the new header is drawn from lockcnt.c,
since the header changes were added in the same commit as
lockcnt.c; since neither thread.h nor lockcnt.c state an explicit
license, the standard default of GPL-2-or-later applies.
We include the new header (and the .c file, which was accidentally
omitted previously) in the "RCU" part of MAINTAINERS, since that
is where the lockcnt.rst documentation is categorized.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20240816132212.3602106-7-peter.maydell@linaro.org
The OMAP interrupt controller code used to have an omap-intc
class and an omap2-intc class, which shared common code via
the abstract class common-omap-intc. Now we have deleted
omap2-intc, we don't need the separate abstract base class;
fold int into omap-intc.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003135323.1653230-1-peter.maydell@linaro.org
The Allwinner A10 SPI controller is added to the Allwinner A10
description, so it is available when Cubieboard is emulated.
Update the documentation for Cubieboard to indicate SPI availability.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20241001221349.8319-3-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements Allwinner A10 SPI controller emulation.
Only master-mode functionality is implemented.
Since U-Boot and Linux SPI drivers for Allwinner A10 perform only
byte-wide CPU access (no DMA) to the transmit and receive registers of
the peripheral, the emulated controller does not implement DMA control,
and supports only byte-wide access to transmit and receive registers
(half-word and word accesses will be treated as byte accesses).
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20241001221349.8319-2-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit creates a clock in STM32L4x5 SYSCFG and wires it up to the
corresponding clock from STM32L4x5 RCC.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20241003081105.40836-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the reset and clock controller device to the stm32f405 SoC.
Signed-off-by: Roman Cardenas Rodriguez <rcardenas.rod@gmail.com>
[PMM: tweak commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Generic RCC class for STM32 devices. It can be used for most of
the STM32 chips. Note that it only implements enable and reset
capabilities.
Signed-off-by: Roman Cardenas Rodriguez <rcardenas.rod@gmail.com>
[PMM: tweaked commit message, added MAINTAINERS lines]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The recently removed 'cheetah' machine was the single user
of the omap_uwire_attach() method. Remove it altogether with
the uWireSlave structure. Replace the send/receive callbacks
by Unimplemented logging.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use a common shareable type for win32 & unix, and helper functions.
This simplify the code as it avoids a lot of #ifdef'ery.
Note: if it helps review, commits could be reordered to introduce the
common type before introducing shareable memory for unix.
Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-19-marcandre.lureau@redhat.com>
Similar to what was done in commit 9462ff46 ("virtio-gpu/win32: allocate
shareable 2d resources/images") for win32, allocate resource memory with
memfd, so the associated display surface memory can be shared with a
different process.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-18-marcandre.lureau@redhat.com>
Add a new callback to handle softmmu paging. Return the page
details directly, instead of passing them indirectly to
tlb_set_page. Handle alignment simultaneously with paging so
that faults are handled with target-specific priority.
Route all calls of the two hooks through a tlb_fill_align
function local to cputlb.c.
As yet no targets implement the new hook.
As yet cputlb.c does not use the new alignment check.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
=/zo4
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* pc: Add a description for the i8042 property
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
# Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
# nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
# pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
# DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
# a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
# =/zo4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Oct 2024 21:04:27 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
qom: update object_resolve_path*() documentation
qom: set *ambiguous on all paths
qom: rename object_resolve_path_type() "ambiguousp"
target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
kvm: Allow kvm_arch_get/put_registers to accept Error**
accel/kvm: refactor dirty ring setup
minikconf: print error entirely on stderr
9p: remove 'proxy' filesystem backend driver
hw/char: Extract serial-mm
hw/char/serial.h: Extract serial-isa.h
hw: Remove unused inclusion of hw/char/serial.h
target/i386: Expose IBPB-BRTYPE and SBPB CPUID bits to the guest
kvm: refactor core virtual machine creation into its own function
kvm/i386: replace identity_base variable with a constant
kvm/i386: refactor kvm_arch_init and split it into smaller functions
kvm: replace fprintf with error_report()/printf() in kvm_init()
kvm/i386: fix return values of is_host_cpu_intel()
kvm/i386: make kvm_filter_msr() and related definitions private to kvm module
hw/i386/pc: Add a description for the i8042 property
tests/unit: remove block layer code from test-nested-aio-poll
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/Kconfig
# hw/arm/pxa2xx.c
Expose handle_bufioreq in xen_register_ioreq().
This is to allow machines to enable or disable buffered ioreqs.
No functional change since all callers still set it to
HVM_IOREQSRV_BUFIOREQ_ATOMIC.
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
hw/char/serial currently contains the implementation of both TYPE_SERIAL and
TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal
class while TYPE_SERIAL_MM is used by numerous machine types directly. Let's
move the latter into its own module which makes the dependencies more obvious
and the code more tidy.
The includes and the dependencies have been converted mechanically except in the
hw/char directories which were updated manually. The result was compile-tested.
Now, only hw/char makes direct use of TYPE_SERIAL:
# grep -r -e "select SERIAL" | grep -v SERIAL_
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
# grep -r -e "/serial\\.h"
include/hw/char/serial-mm.h:#include "hw/char/serial.h"
hw/char/serial-pci-multi.c:#include "hw/char/serial.h"
hw/char/serial.c:#include "hw/char/serial.h"
hw/char/serial-isa.c:#include "hw/char/serial.h"
hw/char/serial-pci.c:#include "hw/char/serial.h"
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-4-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The includes where updated based on compile errors. Now, the inclusion of the
header roughly matches Kconfig dependencies:
# grep -r -e "select SERIAL_ISA"
hw/ppc/Kconfig: select SERIAL_ISA
hw/isa/Kconfig: select SERIAL_ISA
hw/sparc64/Kconfig: select SERIAL_ISA
hw/i386/Kconfig: select SERIAL_ISA
hw/i386/Kconfig: select SERIAL_ISA # for serial_hds_isa_init()
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-3-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pcie_chassis_find_slot has been unused since it was added.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
remote_iohub_finalize has never been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vhost_dev_load_inflight and vhost_dev_save_inflight have been
unused since they were added in 2019 by:
5ad204bf2a ("vhost-user: Support transferring inflight buffer between qemu and backend")
Remove them, and their helper vhost_dev_resize_inflight.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
fw_cfg_init_io has been unused since
918a7f706b ("i386: load kernel on xen using DMA")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
serial_set_frequnecy has been unused since it was added in 2009:
038eaf82c8 ("serial: Add interface to set reference oscillator frequency")
It looks like the 'baudbase' is now a property anyway so the wrapper
isn't needed.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
mch_mcfg_base has been unused since it was added by
6f1426ab0f ("ich9: APIs for pc guest info")
back in 2013.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
xen_be_copy_grant_refs is unused since 2019's
19f87870ba ("xen: remove the legacy 'xen_disk' backend")
xen_config_dev_console is unused since 2018's
6d7c06c213 ("Remove broken Xen PV domain builder")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
xen_be_copy_grant_refs is unused since 2019's
19f87870ba ("xen: remove the legacy 'xen_disk' backend")
xen_config_dev_console is unused since 2018's
6d7c06c213 ("Remove broken Xen PV domain builder")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates
-----BEGIN PGP SIGNATURE-----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=15Hm
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.2
* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmb83lYACgkQr3yVEwxT
# gBNndBAAmh66yWt9TeTHlQ/rgBhx2nUMBbfICBWQyNGvPlslffwrNoLkh8jpkuiP
# PD0RQArAAGeM09cgCZCu14JzIBmmNiGgUxsUnqOZvUw18uIlLFlpt/tiT7iGw/Xb
# pfI7waF66/FPXBErY2yiw9/RGQLlkiGNBC9FNYrD/kCahf9MSIobv85tOgSQ2qjH
# nOJ+UBN0TQ1x0Z5lJMj9Pzl1WDvelRnCkYI5nXg1heKG73Hm7GmHt99QpTV2Okqn
# T3jFzEfMTQeHO4nC/X2pbaesE62K+mTg/FZpId2iV8lMCSm1zKof+xJ4boKM9RB2
# 0HjXAT+MveLuLUNtgfbV9C+VgU25M+wnfy5tH0l801Y/Gez8Q1fbK2uykuiyiUSy
# MNNk/KzmOYuffwItuyeL3mmWHXsN+izUIeMmMxfL9X9nssZXRsrDXc+MByS7w0fk
# QOeZmXHTxXwxFymr0t0DLK2eKEG6cqQty1KWp6iLx3uwnMTGo+576P41Q+boj64s
# VllWzmuR0Ta0xuSR4sDvEFCO7OCFEgVdn1j0FvhRFskPEDrbQgXRLq8i3awtU6z1
# NIh+A30XeK+EZLv0sEje6gav5lZHWMfAeCOKJstVzOl8+NQibuKTUrsqLgTrBK6K
# plw8qwvZYjSnYErzHfywlq9ArufIvOHYcx9Nb76tLNy9E+y01yo=
# =15Hm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 02 Oct 2024 06:47:02 BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu: (35 commits)
bsd-user: Add RISC-V 64-bit Target Configuration and Debug XML Files
bsd-user: Implement set_mcontext and get_ucontext_sigreturn for RISCV
bsd-user: Implement 'get_mcontext' for RISC-V
bsd-user: Implement RISC-V signal trampoline setup functions
bsd-user: Define RISC-V signal handling structures and constants
bsd-user: Add generic RISC-V64 target definitions
bsd-user: Define RISC-V system call structures and constants
bsd-user: Define RISC-V VM parameters and helper functions
bsd-user: Add RISC-V thread setup and initialization support
bsd-user: Implement RISC-V sysarch system call emulation
bsd-user: Add RISC-V signal trampoline setup function
bsd-user: Define RISC-V register structures and register copying
bsd-user: Add RISC-V ELF definitions and hardware capability detection
bsd-user: Implement RISC-V TLS register setup
bsd-user: Implement RISC-V CPU register cloning and reset functions
bsd-user: Add RISC-V CPU execution loop and syscall handling
bsd-user: Implement RISC-V CPU initialization and main loop
hw/intc: riscv-imsic: Fix interrupt state updates.
target/riscv/cpu_helper: Fix linking problem with semihosting disabled
target/riscv32: Fix masking of physical address
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
