v8.1M implements a new 'branch future' feature, which is a
set of instructions that request the CPU to perform a branch
"in the future", when it reaches a particular execution address.
In hardware, the expected implementation is that the information
about the branch location and destination is cached and then
acted upon when execution reaches the specified address.
However the architecture permits an implementation to discard
this cached information at any point, and so guest code must
always include a normal branch insn at the branch point as
a fallback. In particular, an implementation is specifically
permitted to treat all BF insns as NOPs (which is equivalent
to discarding the cached information immediately).
For QEMU, implementing this caching of branch information
would be complicated and would not improve the speed of
execution at all, so we make the IMPDEF choice to implement
all BF insns as NOPs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-7-peter.maydell@linaro.org
The BLX immediate insn in the Thumb encoding always performs
a switch from Thumb to Arm state. This would be totally useless
in M-profile which has no Arm decoder, and so the instruction
does not exist at all there. Make the encoding UNDEF for M-profile.
(This part of the encoding space is used for the branch-future
and low-overhead-loop insns in v8.1M.)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-6-peter.maydell@linaro.org
The t32 decode has a group which represents a set of insns
which overlap with B_cond_thumb because they have [25:23]=111
(which is an invalid condition code field for the branch insn).
This group is currently defined using the {} overlap-OK syntax,
but it is almost entirely non-overlapping patterns. Switch
it over to use a non-overlapping group.
For this to be valid syntactically, CPS must move into the same
overlapping-group as the hint insns (CPS vs hints was the
only actual use of the overlap facility for the group).
The non-overlapping subgroup for CLREX/DSB/DMB/ISB/SB is no longer
necessary and so we can remove it (promoting those insns to
be members of the parent group).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-5-peter.maydell@linaro.org
From v8.1M, disabled-coprocessor handling changes slightly:
* coprocessors 8, 9, 14 and 15 are also governed by the
cp10 enable bit, like cp11
* an extra range of instruction patterns is considered
to be inside the coprocessor space
We previously marked these up with TODO comments; implement the
correct behaviour.
Unfortunately there is no ID register field which indicates this
behaviour. We could in theory test an unrelated ID register which
indicates guaranteed-to-be-in-v8.1M behaviour like ID_ISAR0.CmpBranch
>= 3 (low-overhead-loops), but it seems better to simply define a new
ARM_FEATURE_V8_1M feature flag and use it for this and other
new-in-v8.1M behaviour that isn't identifiable from the ID registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-3-peter.maydell@linaro.org
Unlike many other bits in HCR_EL2, the description for this
bit does not contain the phrase "if ... this field behaves
as 0 for all purposes other than", so do not squash the bit
in arm_hcr_el2_eff.
Instead, replicate the E2H+TGE test in the two places that
require it.
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Message-id: 20201008162155.161886-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The reporting in AArch64.TagCheckFail only depends on PSTATE.EL,
and not the AccType of the operation. There are two guest
visible problems that affect LDTR and STTR because of this:
(1) Selecting TCF0 vs TCF1 to decide on reporting,
(2) Report "data abort same el" not "data abort lower el".
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Message-id: 20201008162155.161886-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already have the full ARMMMUIdx as computed from the
function parameter.
For the purpose of regime_has_2_ranges, we can ignore any
difference between AccType_Normal and AccType_Unpriv, which
would be the only difference between the passed mmu_idx
and arm_mmu_idx_el.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Message-id: 20201008162155.161886-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When TBI is enabled in a given regime, 56 bits of the address
are significant and we need to clear out any other matching
virtual addresses with differing tags.
The other uses of tlb_flush_page (without mmuidx) in this file
are only used by aarch32 mode.
Fixes: 38d931687f
Reported-by: Jordan Frank <jordanfrank@fb.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201016210754.818257-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For AArch32, unlike the VCVT of integer to float, which honours the
rounding mode specified by the FPSCR, VCVT of fixed-point to float is
always round-to-nearest. (AArch64 fixed-point-to-float conversions
always honour the FPCR rounding mode.)
Implement this by providing _round_to_nearest versions of the
relevant helpers which set the rounding mode temporarily when making
the call to the underlying softfloat function.
We only need to change the VFP VCVT instructions, because the
standard- FPSCR value used by the Neon VCVT is always set to
round-to-nearest, so we don't need to do the extra work of saving
and restoring the rounding mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201013103532.13391-1-peter.maydell@linaro.org
The SMLAD instruction is supposed to:
* signed multiply Rn[15:0] * Rm[15:0]
* signed multiply Rn[31:16] * Rm[31:16]
* perform a signed addition of the products and Ra
* set Rd to the low 32 bits of the theoretical
infinite-precision result
* set the Q flag if the sign-extension of Rd
would differ from the infinite-precision result
(ie on overflow)
Our current implementation doesn't quite do this, though: it performs
an addition of the products setting Q on overflow, and then it adds
Ra, again possibly setting Q. This sometimes incorrectly sets Q when
the architecturally mandated only-check-for-overflow-once algorithm
does not. For instance:
r1 = 0x80008000; r2 = 0x80008000; r3 = 0xffffffff
smlad r0, r1, r2, r3
This is (-32768 * -32768) + (-32768 * -32768) - 1
The products are both 0x4000_0000, so when added together as 32-bit
signed numbers they overflow (and QEMU sets Q), but because the
addition of Ra == -1 brings the total back down to 0x7fff_ffff
there is no overflow for the complete operation and setting Q is
incorrect.
Fix this edge case by resorting to 64-bit arithmetic for the
case where we need to add three values together.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201009144712.11187-1-peter.maydell@linaro.org
QEMU supports a 48-bit physical address range, but we don't currently
expose it in the '-cpu max' ID registers (you get the same range as
Cortex-A57, which is 44 bits).
Set the ID_AA64MMFR0.PARange field to indicate 48 bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201001160116.18095-1-peter.maydell@linaro.org
We add the kvm-steal-time CPU property and implement it for machvirt.
A tiny bit of refactoring was also done to allow pmu and pvtime to
use the same vcpu device helper functions.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we compile without KVM support !defined(CONFIG_KVM) we generate
stubs for functions that the linker will still encounter. Sometimes
these stubs can be executed safely and are placed in paths where they
get executed with or without KVM. Other functions should never be
called without KVM. Those functions should be guarded by kvm_enabled(),
but should also be robust to refactoring mistakes. Putting a
g_assert_not_reached() in the function should help. Additionally,
the g_assert_not_reached() calls may actually help the linker remove
some code.
We remove the stubs for kvm_arm_get/put_virtual_time(), as they aren't
necessary at all - the only caller is in kvm.c
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While converting to gen_gvec_ool_zzzp, we lost passing
a->esz as the data argument to the function.
Fixes: 36cbb7a8e7
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200918000500.2690937-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mte update missed a bit when producing clean addresses.
Fixes: b2aa8879b8
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200916014102.2446323-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The M-profile definition of the MVFR1 ID register differs slightly
from the A-profile one, and in particular the check for "does the CPU
support fp16 arithmetic" is not the same.
We don't currently implement any M-profile CPUs with fp16 arithmetic,
so this is not yet a visible bug, but correcting the logic now
disarms this beartrap for when we eventually do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-6-peter.maydell@linaro.org
Give the Cortex-M0 ID register values corresponding to its
implemented behaviour. These will not be guest-visible but will be
used to govern the behaviour of QEMU's emulation. We use the same
values that the Cortex-M3 does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-5-peter.maydell@linaro.org
Move the id_pfr0 and id_pfr1 fields into the ARMISARegisters
sub-struct. We're going to want id_pfr1 for an isar_features
check, and moving both at the same time avoids an odd
inconsistency.
Changes other than the ones to cpu.h and kvm64.c made
automatically with:
perl -p -i -e 's/cpu->id_pfr/cpu->isar.id_pfr/' target/arm/*.c hw/intc/armv7m_nvic.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-3-peter.maydell@linaro.org
The ARM_FEATURE_PXN bit indicates whether the CPU supports the PXN
bit in short-descriptor translation table format descriptors. This
is indicated by ID_MMFR0.VMSA being at least 0b0100. Replace the
feature bit with an ID register check, in line with our preference
for ID register checks over feature bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-2-peter.maydell@linaro.org
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
When debugging QEMU it is often useful to put a breakpoint on the
error_setg_internal method impl.
Unfortunately the object_property_add / object_class_property_add
methods call object_property_find / object_class_property_find methods
to check if a property exists already before adding the new property.
As a result there are a huge number of calls to error_setg_internal
on startup of most QEMU commands, making it very painful to set a
breakpoint on this method.
Most callers of object_find_property and object_class_find_property,
however, pass in a NULL for the Error parameter. This simplifies the
methods to remove the Error parameter entirely, and then adds some
new wrapper methods that are able to raise an Error when needed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200914135617.1493072-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.
Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.
Coccinelle patch used to convert all users of the macros:
@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);
@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This check was backwards when introduced in commit
033614c47d:
target/arm: Filter cycle counter based on PMCCFILTR_EL0
Cc: qemu-stable@nongnu.org
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that 32-bit KVM host support is gone, KVM can never
be enabled unless CONFIG_AARCH64 is true, and some code
paths are no longer reachable and can be deleted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200904154156.31943-3-peter.maydell@linaro.org
We deprecated the support for KVM on 32-bit Arm hosts in time
for release 5.0, which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note: the Linux
kernel dropped support for 32-bit Arm KVM hosts in 5.7.
Running 32-bit guests on a 64-bit Arm host remains supported.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200904154156.31943-2-peter.maydell@linaro.org
The VCMLA and VCADD insns have a size field which is 0 for fp16
and 1 for fp32 (note that this is the reverse of the Neon 3-same
encoding!). Convert it to MO_* values in decode for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-4-peter.maydell@linaro.org
Convert the insns using the 2reg_vcvt and 2reg_vcvt_f16 formats
to pass the size through to the trans function as a MO_* value
rather than the '0==f32, 1==f16' used in the fp 3-same encodings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-3-peter.maydell@linaro.org
In the Neon instructions, some instruction formats have a 2-bit size
field which corresponds exactly to QEMU's MO_8/16/32/64. However the
floating-point insns in the 3-same group have a 1-bit size field
which is "0 for 32-bit float and 1 for 16-bit float". Currently we
pass these values directly through to trans_ functions, which means
that when reading a particular trans_ function you need to know if
that insn uses a 2-bit size or a 1-bit size.
Move the handling of the 1-bit size to the decodetree file, so that
all these insns consistently pass a size to the trans_ function which
is an MO_8/16/32/64 value.
In this commit we switch over the insns using the 3same_fp and
3same_fp_q0 formats.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-2-peter.maydell@linaro.org
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This change is in a separate patch because it's not so obvious that it
won't cause a regression.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-3-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are other platforms which also have CPUs that start powered off, so
generalize the start-powered-off property so that it can be used by them.
Note that ARMv7MState also has a property of the same name but this patch
doesn't change it because that class isn't a subclass of CPUState so it
wouldn't be a trivial change.
This change should not cause any change in behavior.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-2-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There's a typo in the type name of AARCH64_CPU_GET_CLASS. This
was never detected because the macro is not used by any code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-52-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Set the MVFR1 ID register FPHP and SIMDHP fields to indicate
that our "-cpu max" has v8.2-FP16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-46-peter.maydell@linaro.org
Convert the Neon floating-point VMUL, VMLA and VMLS to use gvec,
and use this to implement fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-45-peter.maydell@linaro.org
In the gvec helper functions for indexed operations, for AArch32
Neon the oprsz (total size of the vector) can be less than 16 bytes
if the operation is on a D reg. Since the inner loop in these
helpers always goes from 0 to segment, we must clamp it based
on oprsz to avoid processing a full 16 byte segment when asked to
handle an 8 byte wide vector.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-43-peter.maydell@linaro.org
Convert the Neon VRINTX insn to use gvec, and use this to implement
fp16 support for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-42-peter.maydell@linaro.org
Convert the Neon VRINT-with-specified-rounding-mode insns to gvec,
and use this to implement the fp16 versions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-41-peter.maydell@linaro.org
Convert the Neon VCVT with-specified-rounding-mode instructions
to gvec, and use this to implement fp16 support for them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-40-peter.maydell@linaro.org
Implement fp16 for the Neon VCVT insns which convert between
float and fixed-point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-39-peter.maydell@linaro.org
Convert the Neon VCVT float<->fixed-point insns to a
gvec style, in preparation for adding fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-38-peter.maydell@linaro.org
Convert the Neon float-integer VCVT insns to gvec, and use this
to implement fp16 support for them.
Note that unlike the VFP int<->fp16 VCVT insns we converted
earlier and which convert to/from a 32-bit integer, these
Neon insns convert to/from 16-bit integers. So we can use
the existing vfp conversion helpers for the f32<->u32/i32
case but need to provide our own for f16<->u16/i16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-37-peter.maydell@linaro.org
Convert the Neon pairwise fp ops to use a single gvic-style
helper to do the full operation instead of one helper call
for each 32-bit part. This allows us to use the same
framework to implement the fp16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-36-peter.maydell@linaro.org
Convert the Neon VRSQRTS insn to using a gvec helper,
and use this to implement the fp16 case.
As with VRECPS, we adjust the phrasing of the new implementation
slightly so that the fp32 version parallels the fp16 one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-35-peter.maydell@linaro.org
Convert the Neon VRECPS insn to using a gvec helper, and
use this to implement the fp16 case.
The phrasing of the new float32_recps_nf() is slightly different from
the old recps_f32() so that it parallels the f16 version; for f16 we
can't assume that flush-to-zero is always enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-34-peter.maydell@linaro.org
Convert the neon floating-point vector compare-vs-0 insns VCEQ0,
VCGT0, VCLE0, VCGE0 and VCLT0 to use a gvec helper, and use this to
implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-33-peter.maydell@linaro.org
Convert the neon floating-point vector operations VFMA and VFMS
to use a gvec helper, and use this to implement the fp16 case.
This is the last use of do_3same_fp() so we can now delete
that function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-32-peter.maydell@linaro.org
Convert the Neon floating-point VMLA and VMLS insns over to using a
gvec helper, and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-31-peter.maydell@linaro.org
Convert the Neon floating point VMAXNM and VMINNM insns to
using a gvec helper and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-30-peter.maydell@linaro.org
Convert the Neon float-point VMAX and VMIN insns over to using
a gvec helper, and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-29-peter.maydell@linaro.org
Convert the neon floating-point vector absolute comparison ops
VACGE and VACGT over to using a gvec hepler and use this to
implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-28-peter.maydell@linaro.org
Convert the Neon floating-point vector comparison ops VCEQ,
VCGE and VCGT over to using a gvec helper and use this to
implement the fp16 case.
(We put the float16_ceq() etc functions above the DO_2OP()
macro definition because later when we convert the
compare-against-zero instructions we'll want their
definitions to be visible at that point in the source file.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-27-peter.maydell@linaro.org
Rewrite Neon VABS/VNEG of floats to use gvec logical AND and XOR, so
that we can implement the fp16 version of the insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-26-peter.maydell@linaro.org
We already have gvec helpers for floating point VRECPE and
VRQSRTE, so convert the Neon decoder to use them and
add the fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-25-peter.maydell@linaro.org
Implement FP16 support for the Neon insns which use the DO_3S_FP_GVEC
macro: VADD, VSUB, VABD, VMUL.
For VABD this requires us to implement a new gvec_fabd_h helper
using the machinery we have already for the other helpers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-24-peter.maydell@linaro.org
Implement the VFP fp16 variant of VMOV that transfers a 16-bit
value between a general purpose register and a VFP register.
Note that Rt == 15 is UNPREDICTABLE; since this insn is v8 and later
only we have no need to replicate the old "updates CPSR.NZCV"
behaviour that the singleprec version of this insn does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-22-peter.maydell@linaro.org
The fp16 extension includes a new instruction VMOVX, which copies the
upper 16 bits of a 32-bit source VFP register into the lower 16
bits of the destination and zeroes the high half of the destination.
Implement it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-21-peter.maydell@linaro.org
The fp16 extension includes a new instruction VINS, which copies the
lower 16 bits of a 32-bit source VFP register into the upper 16 bits
of the destination. Implement it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-20-peter.maydell@linaro.org
Implement the fp16 version of the VFP VRINT* insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-19-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VSEL instruction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-18-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VCVT instruction forms
which convert between floating point and integer with a specified
rounding mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-17-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VCVT instruction forms which
convert between floating point and fixed-point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-16-peter.maydell@linaro.org
Now the VFP_CONV_FIX macros can handle fp16's distinction between the
width of the operation and the width of the type used to pass operands,
use the macros rather than the open-coded functions.
This creates an extra six helper functions, all of which we are going
to need for the AArch32 VFP fp16 instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-15-peter.maydell@linaro.org
Currently the VFP_CONV_FIX macros take a single fsz argument for the
size of the float type, which is used both to select the name of
the functions to call (eg float32_is_any_nan()) and also for the
type to use for the float inputs and outputs (eg float32).
Separate these into fsz and ftype arguments, so that we can use them
for fp16, which uses 'float16' in the function names but is still
passing inputs and outputs in a 32-bit sized type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-14-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VCVT instruction forms which
convert between floating point and integer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-13-peter.maydell@linaro.org
Implement the fp16 versions of the VFP VLDR/VSTR (immediate).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-12-peter.maydell@linaro.org
Implement fp16 version of VCMP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-11-peter.maydell@linaro.org
Implement VFP fp16 support for the VMOV immediate insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-10-peter.maydell@linaro.org
Implement VFP fp16 for VABS, VNEG and VSQRT. This is all
the fp16 insns that use the DO_VFP_2OP macro, because there
is no fp16 version of VMOV_reg.
Notes:
* the gen_helper_vfp_negh already exists as we needed to create
it for the fp16 multiply-add insns
* as usual we need to use the f16 version of the fp_status;
this is only relevant for VSQRT
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-9-peter.maydell@linaro.org
Macroify the uses of do_vfp_2op_sp() and do_vfp_2op_dp(); this will
make it easier to add the halfprec support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-8-peter.maydell@linaro.org
Macroify creation of the trans functions for single and double
precision VFMA, VFMS, VFNMA, VFNMS. The repetition was OK for
two sizes, but we're about to add halfprec and it will get a bit
more than seems reasonable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-6-peter.maydell@linaro.org
Implement fp16 versions of the VFP VMLA, VMLS, VNMLS, VNMLA, VNMUL
instructions. (These are all the remaining ones which we implement
via do_vfp_3op_[hsd]p().)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-5-peter.maydell@linaro.org
Implmeent VFP fp16 support for simple binary-operator VFP insns VADD,
VSUB, VMUL, VDIV, VMINNM and VMAXNM:
* make the VFP_BINOP() macro generate float16 helpers as well as
float32 and float64
* implement a do_vfp_3op_hp() function similar to the existing
do_vfp_3op_sp()
* add decode for the half-precision insn patterns
Note that the VFP_BINOP macro use creates a couple of unused helper
functions vfp_maxh and vfp_minh, but they're small so it's not worth
splitting the BINOP operations into "needs halfprec" and "no
halfprec" groups.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-4-peter.maydell@linaro.org
The aa32_fp16_arith feature check function currently looks at the
AArch64 ID_AA64PFR0 register. This is (as the comment notes) not
correct. The bogus check was put in mostly to allow testing of the
fp16 variants of the VCMLA instructions and it was something of
a mistake that we allowed them to exist in master.
Switch the feature check function to testing VMFR1.FPHP, which is
what it ought to be.
This will remove emulation of the VCMLA and VCADD insns from
AArch32 code running on an AArch64 '-cpu max' using system emulation.
(They were never enabled for aarch32 linux-user and system-emulation.)
Since we weren't advertising their existence via the AArch32 ID
register, well-behaved guests wouldn't have been using them anyway.
Once we have implemented all the AArch32 support for the FP16 extension
we will advertise it in the MVFR1 ID register field, which will reenable
these insns along with all the others.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-3-peter.maydell@linaro.org
In several places the target/arm code defines local float constants
for 2, 3 and 1.5, which are also provided by include/fpu/softfloat.h.
Remove the unnecessary local duplicate versions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-2-peter.maydell@linaro.org
Clang static code analyzer show warning:
target/arm/translate-a64.c:8635:14: warning: Value stored to 'tcg_rn' during its
initialization is never read
TCGv_i64 tcg_rn = new_tmp_a64(s);
^~~~~~ ~~~~~~~~~~~~~~
target/arm/translate-a64.c:8636:14: warning: Value stored to 'tcg_rd' during its
initialization is never read
TCGv_i64 tcg_rd = new_tmp_a64(s);
^~~~~~ ~~~~~~~~~~~~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827110311.164316-4-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unify add/sub helpers and add a parameter for rounding.
This will allow saturating non-rounding to reuse this code.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: fixed accidental use of '=' rather than '+=' in do_sqrdmlah_s]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than require the user to fill in the immediate (shl or shr),
create full formats that include the immediate.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Model after gen_gvec_fn_zzz et al.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The existing clr functions have only one vector argument, and so
can only clear in place. The existing movz functions have two
vector arguments, and so can clear while moving. Merge them, with
a flag that controls the sense of active vs inactive elements
being cleared.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Model after gen_gvec_fn_zzz et al.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gvec operation was added after the initial implementation
of the SEL instruction and was missed in the conversion.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the check for !S into do_pppp_flags, which allows to merge in
do_vecop4_p. Split out gen_gvec_fn_ppp without sve_access_check,
to mirror gen_gvec_fn_zzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the only user of the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to ensure that access is checked by the time we ask
for a specific fp/vector register. We want to ensure that
we do not emit two lots of code to raise an exception.
But sometimes it's difficult to cleanly organize the code
such that we never pass through sve_check_access exactly once.
Allow multiple calls so long as the result is true, that is,
no exception to be raised.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Model gen_gvec_fn_zzz on gen_gvec_fn3 in translate-a64.c, but
indicating which kind of register and in which order.
Model do_zzz_fn on the other do_foo functions that take an
argument set and verify sve enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Model the new function on gen_gvec_fn2 in translate-a64.c, but
indicating which kind of register and in which order. Since there
is only one user of do_vector2_z, fold it into do_mov_z.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200815013145.539409-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to AArch64.TagCheckFault, none of the other ISS values are
provided, so we do not need to go so far as merge_syn_data_abort.
But we were missing the WnR bit.
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200813200816.3037186-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need more information than just the mmu_idx in order
to create the proper exception syndrome. Only change the
function signature so far.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200813200816.3037186-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit ce4afed839 ("target/arm: Implement AArch32 HCR and HCR2")
the HCR_EL2 register has been changed from type NO_RAW (no underlying
state and does not support raw access for state saving/loading) to
type CONST (TCG can assume the value to be constant), removing the
read/write accessors.
We forgot to remove the previous type ARM_CP_NO_RAW. This is not
really a problem since the field is overwritten. However it makes
code review confuse, so remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200812111223.7787-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we implemented the VCMLA and VCADD insns we put in the
code to handle fp16, but left it using the standard fp status
flags. Correct them to use FPST_STD_F16 for fp16 operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-5-peter.maydell@linaro.org
Architecturally, Neon FP16 operations use the "standard FPSCR" like
all other Neon operations. However, this is defined in the Arm ARM
pseudocode as "a fixed value, except that FZ16 (and AHP) follow the
FPSCR bits". In QEMU, the softfloat float_status doesn't include
separate flush-to-zero for FP16 operations, so we must keep separate
fp_status for "Neon non-FP16" and "Neon fp16" operations, in the
same way we do already for the non-Neon "fp_status" vs "fp_status_f16".
Add the extra float_status field to the CPU state structure,
ensure it is correctly initialized and updated on FPSCR writes,
and make fpstatus_ptr(FPST_STD_F16) return a pointer to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-4-peter.maydell@linaro.org
Make A32/T32 code use the new fpstatus_ptr() API:
get_fpstatus_ptr(0) -> fpstatus_ptr(FPST_FPCR)
get_fpstatus_ptr(1) -> fpstatus_ptr(FPST_STD)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-3-peter.maydell@linaro.org
We currently have two versions of get_fpstatus_ptr(), which both take
an effectively boolean argument:
* the one for A64 takes "bool is_f16" to distinguish fp16 from other ops
* the one for A32/T32 takes "int neon" to distinguish Neon from other ops
This is confusing, and to implement ARMv8.2-FP16 the A32/T32 one will
need to make a four-way distinction between "non-Neon, FP16",
"non-Neon, single/double", "Neon, FP16" and "Neon, single/double".
The A64 version will then be a strict subset of the A32/T32 version.
To clean this all up, we want to go to a single implementation which
takes an enum argument with values FPST_FPCR, FPST_STD,
FPST_FPCR_F16, and FPST_STD_F16. We rename the function to
fpstatus_ptr() so that unconverted code gets a compilation error
rather than silently passing the wrong thing to the new function.
This commit implements that new API, and converts A64 to use it:
get_fpstatus_ptr(false) -> fpstatus_ptr(FPST_FPCR)
get_fpstatus_ptr(true) -> fpstatus_ptr(FPST_FPCR_F16)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-2-peter.maydell@linaro.org
In commit 962fcbf2ef we converted the uses of the
ARM_FEATURE_CRC bit to use the aa32_crc32 isar_feature test
instead. However we forgot to remove the now-unused definition
of the feature name in the enum. Delete it now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200805210848.6688-1-peter.maydell@linaro.org
In arm_tr_init_disas_context() we have a FIXME comment that suggests
"cpu_M0 can probably be the same as cpu_V0". This isn't in fact
possible: cpu_V0 is used as a temporary inside gen_iwmmxt_shift(),
and that function is called in various places where cpu_M0 contains a
live value (i.e. between gen_op_iwmmxt_movq_M0_wRn() and
gen_op_iwmmxt_movq_wRn_M0() calls). Remove the comment.
We also have a comment on the declarations of cpu_V0/V1/M0 which
claims they're "for efficiency". This isn't true with modern TCG, so
replace this comment with one which notes that they're only used with
the iwmmxt decode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803132815.3861-1-peter.maydell@linaro.org
As part of the Neon decodetree conversion we removed all
the uses of the VFP_DREG macros, but forgot to remove the
macro definitions. Do so now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200803124848.18295-1-peter.maydell@linaro.org
The ARCH() macro was used a lot in the legacy decoder, but
there are now just two uses of it left. Since a macro which
expands out to a goto is liable to be confusing when reading
code, replace the last two uses with a simple open-coded
qeuivalent.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-8-peter.maydell@linaro.org
Convert the T32 coprocessor instructions to decodetree.
As with the A32 conversion, this corrects an underdecoding
where we did not check that MRRC/MCRR [24:21] were 0b0010
and so treated some kinds of LDC/STC and MRRC/MCRR rather
than UNDEFing them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-7-peter.maydell@linaro.org
For M-profile CPUs, the architecture specifies that the NOCP
exception when a coprocessor is not present or disabled should cover
the entire wide range of coprocessor-space encodings, and should take
precedence over UNDEF exceptions. (This is the opposite of
A-profile, where checking for a disabled FPU has to happen last.)
Implement this with decodetree patterns that cover the specified
ranges of the encoding space. There are a few instructions (VLLDM,
VLSTM, and in v8.1 also VSCCLRM) which are in copro-space but must
not be NOCP'd: these must be handled also in the new m-nocp.decode so
they take precedence.
This is a minor behaviour change: for unallocated insn patterns in
the VFP area (cp=10,11) we will now NOCP rather than UNDEF when the
FPU is disabled.
As well as giving us the correct architectural behaviour for v8.1M
and the recommended behaviour for v8.0M, this refactoring also
removes the old NOCP handling from the remains of the 'legacy
decoder' in disas_thumb2_insn(), paving the way for cleaning that up.
Since we don't currently have a v8.1M feature bit or any v8.1M CPUs,
the minor changes to this logic that we'll need for v8.1M are marked
up with TODO comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-6-peter.maydell@linaro.org
The only thing left in the "legacy decoder" is the handling
of disas_xscale_insn(), and we can simplify the code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-5-peter.maydell@linaro.org
Convert the A32 coprocessor instructions to decodetree.
Note that this corrects an underdecoding: for the 64-bit access case
(MRRC/MCRR) we did not check that bits [24:21] were 0b0010, so we
would incorrectly treat LDC/STC as MRRC/MCRR rather than UNDEFing
them.
The decodetree versions of these insns assume the coprocessor
is in the range 0..7 or 14..15. This is architecturally sensible
(as per the comments) and OK in practice for QEMU because the only
uses of the ARMCPRegInfo infrastructure we have that aren't
for coprocessors 14 or 15 are the pxa2xx use of coprocessor 6.
We add an assertion to the define_one_arm_cp_reg_with_opaque()
function to catch any accidental future attempts to use it to
define coprocessor registers for invalid coprocessors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-4-peter.maydell@linaro.org
As a prelude to making coproc insns use decodetree, split out the
part of disas_coproc_insn() which does instruction decoding from the
part which does the actual work, and make do_coproc_insn() handle the
UNDEF-on-bad-permissions and similar cases itself rather than
returning 1 to eventually percolate up to a callsite that calls
unallocated_encoding() for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-3-peter.maydell@linaro.org
At the moment we check for XScale/iwMMXt insns inside
disas_coproc_insn(): for CPUs with ARM_FEATURE_XSCALE all copro insns
with cp 0 or 1 are handled specially. This works, but is an odd
place for this check, because disas_coproc_insn() is called from both
the Arm and Thumb decoders but the XScale case never applies for
Thumb (all the XScale CPUs were ARMv5, which has only Thumb1, not
Thumb2 with the 32-bit coprocessor insn encodings). It also makes it
awkward to convert the real copro access insns to decodetree.
Move the identification of XScale out to its own function
which is only called from disas_arm_insn().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-2-peter.maydell@linaro.org
Similar to hw_arch, each architecture defines two sourceset which are placed in
dictionaries target_arch and target_softmmu_arch. These are then picked up
from there when building the per-emulator static_library.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a coprocessor instruction in an AArch32 guest traps to AArch32
Hyp mode, the syndrome register (HSR) includes Rt and Rt2 fields
which are simply copies of the Rt and Rt2 fields from the trapped
instruction. However, if the instruction is trapped from AArch32 to
an AArch64 higher exception level, the Rt and Rt2 fields in the
syndrome register (ESR_ELx) must be the AArch64 view of the register.
This makes a difference if the AArch32 guest was in a mode other than
User or System and it was using r13 or r14, or if it was in FIQ mode
and using r8-r14.
We don't know at translate time which AArch32 CPU mode we are in, so
we leave the values we generate in our prototype syndrome register
value at translate time as the raw Rt/Rt2 from the instruction, and
instead correct them to the AArch64 view when we find we need to take
an exception from AArch32 to AArch64 with one of these syndrome
values.
Fixes: https://bugs.launchpad.net/qemu/+bug/1879587
Reported-by: Julien Freche <julien@bedrocksystems.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200804193903.31240-1-peter.maydell@linaro.org
These instructions use zero as the discriminator, not SP.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Message-id: 20200804002849.30268-1-pcc@google.com
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GCC version 4.9.4 isn't clever enough to figure out that all
execution paths in disas_ldst() that use 'fn' will have initialized
it first, and so it warns:
/home/LiKaige/qemu/target/arm/translate-a64.c: In function ‘disas_ldst’:
/home/LiKaige/qemu/target/arm/translate-a64.c:3392:5: error: ‘fn’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
fn(cpu_reg(s, rt), clean_addr, tcg_rs, get_mem_index(s),
^
/home/LiKaige/qemu/target/arm/translate-a64.c:3318:22: note: ‘fn’ was declared here
AtomicThreeOpFn *fn;
^
Make it happy by initializing the variable to NULL.
Signed-off-by: Kaige Li <likaige@loongson.cn>
Message-id: 1596110248-7366-2-git-send-email-likaige@loongson.cn
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Clean up commit message and note which gcc version this was]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definition of top_bit used in this function is one higher
than that used in the Arm ARM psuedo-code, which put the error
indication at top_bit - 1 at the wrong place, which meant that
it wasn't visible to Auth.
Fixing the definition of top_bit requires more changes, because
its most common use is for the count of bits in top_bit:bot_bit,
which would then need to be computed as top_bit - bot_bit + 1.
For now, prefer the minimal fix to the error indication alone.
Fixes: 63ff0ca94c
Reported-by: Derrick McKee <derrick.mckee@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200728195706.11087-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about the divergence from the pseudocode]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When GCR_EL1.RRND==1, the choosing of the random value is IMPDEF,
and the kernel is not expected to have set RGSR_EL1. Force a
non-zero value into SEED, so that we do not continually return
the same tag.
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200724163853.504655-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we changed the interface of get_phys_addr_lpae to require
the cacheattr parameter, this spot was missed. The compiler is
unable to detect the use of NULL vs the nonnull attribute here.
Fixes: 7e98e21c09
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Jan Kiszka <jan.kiskza@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Control this cpu feature via a machine property, much as we do
with secure=on, since both require specialized support in the
machine setup to be functional.
Default MTE to off, since this feature implies extra overhead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Raw writes to this register when in KVM mode can cause interrupts to be
raised (even when the PMU is disabled). Because the underlying state is
already aliased to PMINTENSET (which already provides raw write
functions), we can safely disable raw accesses to PMINTENCLR entirely.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Message-id: 20200707152616.1917154-1-aaron@os.amperecomputing.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mtedesc that was constructed was not actually passed in.
Found by Coverity (CID 1429996).
Fixes: d28d12f008
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200706202345.193676-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
The previous commit enables conversion of
foo(..., &err);
if (err) {
...
}
to
if (!foo(..., errp)) {
...
}
for QOM functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun = {
object_apply_global_props, object_initialize_child_with_props,
object_initialize_child_with_propsv, object_property_get,
object_property_get_bool, object_property_parse, object_property_set,
object_property_set_bool, object_property_set_int,
object_property_set_link, object_property_set_qobject,
object_property_set_str, object_property_set_uint, object_set_props,
object_set_propv, user_creatable_add_dict,
user_creatable_complete, user_creatable_del
};
expression list args, args2;
typedef Error;
Error *err;
@@
- fun(args, &err, args2);
- if (err)
+ if (!fun(args, &err, args2))
{
...
}
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-29-armbru@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
The temp that gets assigned to clean_addr has been allocated with
new_tmp_a64, which means that it will be freed at the end of the
instruction. Freeing it earlier leads to assertion failure.
The loop creates a complication, in which we allocate a new local
temp, which does need freeing, and the final code path is shared
between the loop and non-loop.
Fix this complication by adding new_tmp_a64_local so that the new
local temp is freed at the end, and can be treated exactly like
the non-loop path.
Fixes: bba87d0a0f
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200702175605.1987125-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Injecting external data abort through KVM might trigger
an issue on kernels that do not get updated to include the KVM fix.
For those and aarch32 guests, the injected abort gets misconfigured
to be an implementation defined exception. This leads to the guest
repeatedly re-running the faulting instruction.
Add support for handling that case.
[
Fixed-by: 018f22f95e8a
('KVM: arm: Fix DFSR setting for non-LPAE aarch32 guests')
Fixed-by: 21aecdbd7f3a
('KVM: arm: Make inject_abt32() inject an external abort instead')
]
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Acked-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200629114110.30723-3-beata.michalska@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On ARMv7 & ARMv8 some load/store instructions might trigger a data abort
exception with no valid ISS info to be decoded. The lack of decode info
makes it at least tricky to emulate those instruction which is one of the
(many) reasons why KVM will not even try to do so.
Add support for handling those by requesting KVM to inject external
dabt into the quest.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200629114110.30723-2-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now implement all of the components of MTE, without actually
supporting any tagged memory. All MTE instructions will work,
trivially, so we can enable support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-46-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Look up the physical address for the given virtual address,
convert that to a tag physical address, and finally return
the host address that backs it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-45-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200626033144.790098-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This "bit" is a particular value of the page's MemAttr.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-43-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to check the memattr of a page in order to determine
whether it is Tagged for MTE. Between Stage1 and Stage2,
this becomes simpler if we always collect this data, instead
of occasionally being presented with NULL.
Use the nonnull attribute to allow the compiler to check that
all pointer arguments are non-null.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-42-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
D1.10 specifies that exception handlers begin with tag checks overridden.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-41-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is DC GVA and DC GZVA, and the tag check for DC ZVA.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-40-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are a number of paths by which the TBI is still intact
for user-only in the SVE helpers.
Because we currently always set TBI for user-only, we do not
need to pass down the actual TBI setting from above, and we
can remove the top byte in the inner-most primitives, so that
none are forgotten. Moreover, this keeps the "dirty" pointer
around at the higher levels, where we need it for any MTE checking.
Since the normal case, especially for user-only, goes through
RAM, this clearing merely adds two insns per page lookup, which
will be completely in the noise.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-39-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because the elements are non-sequential, we cannot eliminate many
tests straight away like we can for sequential operations. But
we often have the PTE details handy, so we can test for Tagged.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-38-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We still need to handle tbi for user-only when mte is inactive.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
