Update TX and RX ring base address data type to uint64_t for
64 bits dram address DMA support.
Both "Normal Priority Transmit Ring Base Address Register(0x20)" and
"Receive Ring Base Address Register (0x24)" are used for saving the
low part physical address of descriptor manager.
Therefore, changes to set TX and RX descriptor manager address bits [31:0]
in ftgmac100_read and ftgmac100_write functions.
Incrementing the version of vmstate to 2.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
one MAC controller owns 128KB of register space for AST2500.
However, one MAC controller only owns 64KB of register space for AST2600
and AST2700. It set the memory region size 128KB and it occupied another
controllers Address Spaces.
Update one MAC controller memory region size to 0x1000
because AST2500 did not use register spaces over than 64KB.
Introduce a new container region size to 0x1000 and its range
is from 0 to 0xfff. This container is mapped a sub region
for the current set of register.
This sub region range is from 0 to 0xff.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
- Use published card address (RCA) in qtest/npcm7xx_sdhci
- Have cards use random RCA
- Use SD spec v3.01 by default
- Convert GEN_CMD to sd_generic_read/write_byte style
- Extract SDMMC_COMMON abstract QDev parent from SD_CARD
- Few housekeeping
-----BEGIN PGP SIGNATURE-----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=iKnd
-----END PGP SIGNATURE-----
Merge tag 'sdmmc-20240706' of https://github.com/philmd/qemu into staging
SD/MMC patches queue
- Use published card address (RCA) in qtest/npcm7xx_sdhci
- Have cards use random RCA
- Use SD spec v3.01 by default
- Convert GEN_CMD to sd_generic_read/write_byte style
- Extract SDMMC_COMMON abstract QDev parent from SD_CARD
- Few housekeeping
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaIbbcACgkQ4+MsLN6t
# wN6A2RAAvTqk05r+R8ayyGLtxi6RBLb36WfIZy1iaiS3S5i93KrIwqM3LPqWMRRf
# 1h2dmflec3q3ebY/iHl6bdasdUlqfZDaw8BKBPETbDt9xCVmEC9/n7Vi7EMPmzP6
# A2ci7ZCDup4gLwp8AuB9OcMJnlVLGCQjW5yOTjN0V1MaG15iv6N7d6Th/aLEPEUr
# Ji/kk8adRGJhGRHcbkL7BGK+TxyAOUjjyt0k5e5hSS1W0T4dLgIljxq/L0wOxlZe
# Ot11GO/0EykkMIm7uASYXQws8wJFMgfhTYn77ibbzVFCBtSKvsq6ziuX3WopPoGK
# 0IfMkiK1vRpKey54Yn3+28ZY0v86c3NXybNlLbdrkvcZJgMrFTb4bpWyhQyx4Xbu
# uHfFxfu+rZC8/jfVqHd/RFw5sUliokc9a+KbaG9Yzx5MzXufOnu3iVOpx1vA6ZXX
# lX87qA1tZ78kTn/CtAAPx3CBWE9ojgH7wz/ABBTifUkIfDz5kFYT3g+kfygQQ+xh
# +bvdfQWeJ51Z3tPrUWm5fSGyB//XmgCfww7CZ1d63QaebAwml0YYvR3kivgnZ9A1
# abLr+uN7o4q3bqaY2FUvtglBPttA58wt7n02utWef8ZHl72hCsbvPtfwp2idUMY7
# ZRqdnHOB+opDbH9Xy9tj3Cqq1UPiEv3U3qXhZtd1Us7LSHXC/bk=
# =iKnd
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 05 Jul 2024 03:03:35 PM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'sdmmc-20240706' of https://github.com/philmd/qemu:
hw/sd/sdcard: Extract TYPE_SDMMC_COMMON from TYPE_SD_CARD
hw/sd/sdcard: Introduce set_csd/set_cid handlers
hw/sd/sdcard: Cover more SDCardStates
hw/sd/sdcard: Trace length of data read on DAT lines
hw/sd/sdcard: Remove default case in read/write on DAT lines
hw/sd/sdcard: Remove noise from sd_cmd_name()
hw/sd/sdcard: Remove noise from sd_acmd_name()
hw/sd/sdcard: Remove sd_none enum from sd_cmd_type_t
hw/sd/sdcard: Add sd_cmd_GEN_CMD handler (CMD56)
hw/sd/sdcard: Rename sd_cmd_SEND_OP_COND handler
hw/sd/sdcard: Use spec v3.01 by default
hw/sd/sdcard: Remove leftover comment about removed 'spi' Property
hw/sd/sdcard: Generate random RCA value
tests/qtest/npcm7xx_sdhci: Access the card using its published address
hw/sd/npcm7xx_sdhci: Use TYPE_SYSBUS_SDHCI definition
hw/sd/sdhci: Log non-sequencial access as GUEST_ERROR
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When a command's arguments are specified as an explicit type T,
generated documentation points to the members of T.
Example:
##
# @announce-self:
#
# Trigger generation of broadcast RARP frames to update network
[...]
##
{ 'command': 'announce-self', 'boxed': true,
'data' : 'AnnounceParameters'}
generates
"announce-self" (Command)
-------------------------
Trigger generation of broadcast RARP frames to update network
[...]
Arguments
~~~~~~~~~
The members of "AnnounceParameters"
Except when the command takes its arguments unboxed , i.e. it doesn't
have 'boxed': true, we generate *nothing*. A few commands have a
reference in their doc comment to compensate, but most don't.
Example:
##
# @blockdev-snapshot-sync:
#
# Takes a synchronous snapshot of a block device.
#
# For the arguments, see the documentation of BlockdevSnapshotSync.
[...]
##
{ 'command': 'blockdev-snapshot-sync',
'data': 'BlockdevSnapshotSync',
'allow-preconfig': true }
generates
"blockdev-snapshot-sync" (Command)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Takes a synchronous snapshot of a block device.
For the arguments, see the documentation of BlockdevSnapshotSync.
[...]
Same for event data.
Fix qapidoc.py to generate the reference regardless of boxing. Delete
now redundant references in the doc comments.
Fixes: 4078ee5469 (docs/sphinx: Add new qapi-doc Sphinx extension)
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240628112756.794237-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The double-colon synax is rST formatting that precedes a literal code
block. We do not want to capture these as QAPI-specific sections.
Coerce blocks that start with e.g. "Example::" to be parsed as untagged
paragraphs instead of special tagged sections.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240626222128.406106-14-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Indentation tweaked for consistency]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Generally, surround command-line options with ``literal`` markup to help
it stand out from prose in rendered HTML, and add cross-references to
replace "see also" messages.
References to types, values, and other QAPI definitions are not yet
adjusted here; they will be converted en masse in a subsequent patch
after the new QAPI doc generator is merged.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-13-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Where I've noticed, rephrase the note to read more fluently.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-12-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We do not need a dedicated section for notes. By eliminating a specially
parsed section, these notes can be treated as normal rST paragraphs in
the new QMP reference manual, and can be placed and styled much more
flexibly.
Convert all existing "Note" and "Notes" sections to pure rST. As part of
the conversion, capitalize the first letter of each sentence and add
trailing punctuation where appropriate to ensure notes look sensible and
consistent in rendered HTML documentation. Markup is also re-aligned to
the de-facto standard of 3 spaces for directives.
Update docs/devel/qapi-code-gen.rst to reflect the new paradigm, and
update the QAPI parser to prohibit "Note" sections while suggesting a
new syntax. The exact formatting to use is a matter of taste, but a good
candidate is simply:
.. note:: lorem ipsum ...
... dolor sit amet ...
... consectetur adipiscing elit ...
... but there are other choices, too. The Sphinx readthedocs theme
offers theming for the following forms (capitalization unimportant); all
are adorned with a (!) symbol () in the title bar for rendered HTML
docs.
See
https://sphinx-rtd-theme.readthedocs.io/en/stable/demo/demo.html#admonitions
for examples of each directive/admonition in use.
These are rendered in orange:
.. Attention:: ...
.. Caution:: ...
.. WARNING:: ...
These are rendered in red:
.. DANGER:: ...
.. Error:: ...
These are rendered in green:
.. Hint:: ...
.. Important:: ...
.. Tip:: ...
These are rendered in blue:
.. Note:: ...
.. admonition:: custom title
admonition body text
This patch uses ".. note::" almost everywhere, with just two "caution"
directives. Several instances of "Notes:" have been converted to
merely ".. note::", or multiple ".. note::" where appropriate.
".. admonition:: notes" is used in a few places where we had an
ordered list of multiple notes that would not make sense as
standalone/separate admonitions. Two "Note:" following "Example:"
have been turned into ordinary paragraphs within the example.
NOTE: Because qapidoc.py does not attempt to preserve source ordering of
sections, the conversion of Notes from a "tagged section" to an
"untagged section" means that rendering order for some notes *may
change* as a result of this patch. The forthcoming qapidoc.py rewrite
strictly preserves source ordering in the rendered documentation, so
this issue will be rectified in the new generator.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [for block*.json]
Message-ID: <20240626222128.406106-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message clarified slightly, period added to one more note]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
By unstated convention, Errors sections are rST lists. Document the
convention, and make the one exception conform.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-10-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The new QMP documentation generator wants to parse all examples as
"QMP". We have an existing QMP lexer in docs/sphinx/qmp_lexer.py (Seen
in-use here: https://qemu-project.gitlab.io/qemu/interop/bitmaps.html)
that allows the use of "->", "<-" and "..." tokens to denote QMP
protocol flow with elisions, but otherwise defers to the JSON lexer.
To utilize this lexer for the existing QAPI documentation, we need them
to conform to a standard so that they lex and render correctly. Once the
QMP lexer is active for examples, errant QMP/JSON will produce warning
messages and fail the build.
Fix any invalid JSON found in QAPI documentation (identified by
attempting to lex all examples as QMP; see subsequent
commits). Additionally, elisions must be standardized for the QMP lexer;
they must be represented as the value "...", so three examples have been
adjusted to support that format here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-9-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Sphinx does not like sections without titles, because it wants to
convert every section into a reference. When there is no title, it
struggles to do this and transforms the tree inproperly.
Depending on the rST used, this may result in an assertion error deep in
the docutils HTMLWriter.
(Observed when using ".. admonition:: Notes" under such a section - When
this is transformed with its own <title> element, Sphinx is fooled into
believing this title belongs to the section and incorrect mutates the
docutils tree, leading to errors during rendering time.)
When parsing an untagged section (free paragraphs), skip making a hollow
section and instead append the parse results to the prior section.
Many Bothans died to bring us this information.
The resulting output changes are basically invisible.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-8-jsnow@redhat.com>
[Mention output changes in commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If a comment immediately follows a doc block, the parser doesn't ignore
that token appropriately. Fix that.
e.g.
> ##
> # = Hello World!
> ##
>
> # I'm a comment!
will break the parser, because it does not properly ignore the comment
token if it immediately follows a doc block.
Fixes: 3d035cd2cc (qapi: Rewrite doc comment parser)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-7-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Change get_doc_indented() to preserve indentation on all subsequent text
lines, and create a compatibility dedent() function for qapidoc.py that
removes indentation the same way get_doc_indented() did.
This is being done for the benefit of a new qapidoc generator which
requires that indentation in argument and features sections are
preserved.
Prior to this patch, a section like this:
```
@name: lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
would have its body text be parsed into:
```
lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
We want to preserve the indentation for even the first body line so that
the entire block can be parsed directly as rST. This patch would now
parse that segment into:
```
lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
This is helpful for formatting arguments and features as field lists in
rST, where the new generator will format this information as:
```
:arg type name: lorem ipsum
dolor sit amet
consectetur apidiscing elit
```
...and can be formed by the simple concatenation of the field list
construct and the body text. The indents help preserve the continuation
of a block-level element, and further allow the use of additional rST
block-level constructs such as code blocks, lists, and other such
markup.
This understandably breaks the existing qapidoc.py; so a new function is
added there to dedent the text for compatibility. Once the new generator
is merged, this function will not be needed any longer and can be
dropped.
I verified this patch changes absolutely nothing by comparing the
md5sums of the QMP ref html pages both before and after the change, so
it's certified inert. QAPI test output has been updated to reflect the
new strategy of preserving indents for rST.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-6-jsnow@redhat.com>
[Lost commit message paragraph restored]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In a forthcoming series that adds a new QMP documentation generator, it
will be helpful to have a linting baseline. However, there's no need to
shuffle around the deck chairs too much, because most of this code will
be removed once that new qapidoc generator (the "transmogrifier") is in
place.
To ease my pain: just turn off the black auto-formatter for most, but
not all, of qapidoc.py. This will help ensure that *new* code follows a
coding standard without bothering too much with cleaning up the existing
code.
Code that I intend to keep is still subject to the delinting beam.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-5-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This function has been unused since since commit
fd62bff901 (sphinx/qapidoc: Drop code to generate doc for simple
union tag).
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240626222128.406106-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix minor irritants to pylint/flake8 et al.
(Yes, these need to be guarded by the Python tests. That's a work in
progress, a series that's quite likely to follow once I finish this
Sphinx project. Please pardon the temporary irritation.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-3-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In order to keep eMMC model simpler to maintain,
extract common properties and the common code from
class_init to the (internal) TYPE_SDMMC_COMMON.
Update the corresponding QOM cast macros.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-6-philmd@linaro.org>
In preparation of introducing eMMC support which have
different CSD/CID structures, introduce a pair of handlers
in SDCardClass.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-82-philmd@linaro.org>
So far eMMC will only use sd_sleep_state, but
all all states specified for completeness.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-81-philmd@linaro.org>
Some commands expect less than BLOCK_LENGTH.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-80-philmd@linaro.org>
All read/write on DAT lines are explicitly handled.
Reaching this point would be a programming error:
replace by an assertion.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-79-philmd@linaro.org>
These CMD names weren't really useful, "UNKNOWN_CMD" is simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-78-philmd@linaro.org>
These ACMD names weren't really useful, "UNKNOWN_ACMD" is simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-77-philmd@linaro.org>
All handlers using the 'sd_none' enum got converted,
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-76-philmd@linaro.org>
"General command" (GEN_CMD, CMD56) is described as:
GEN_CMD is the same as the single block read or write
commands (CMD24 or CMD17). The difference is that [...]
the data block is not a memory payload data but has a
vendor specific format and meaning.
Thus this block must not be stored overwriting data block
on underlying storage drive. Handle as RAZ/WI.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-3-philmd@linaro.org>
The correct command name is 'SD SEND_OP_COND',
rename accordingly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-4-philmd@linaro.org>
Recent SDHCI expect cards to support the v3.01 spec
to negociate lower I/O voltage. Select it by default.
Versioned machine types with a version of 9.0 or
earlier retain the old default (spec v2.00).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-2-philmd@linaro.org>
Rather than using the obscure 0x4567 magic value,
use a real random one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240702140842.54242-5-philmd@linaro.org>
Currently setup_sd_card() asks the card its address,
but discard the response and use hardcoded 0x4567.
Set the SDHC_CMD_RESPONSE bit to have the controller
record the bus response, and read the response from
the RSPREG0 register. Then we can select the card with
its real address.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240702140842.54242-4-philmd@linaro.org>
Use the macro instead of two explicit string literals.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240702140842.54242-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240702140842.54242-3-philmd@linaro.org>
- restore some 32 bit host builds and testing
- move some physmem tracepoint definitions
- use --userns keep-id for podman builds
- cleanup check-tcg compiler flag checking for Arm
- fix some casting in fcvt test
- tweak check-tcg inline asm for clang
- suppress some invalid clang warnings
- disable KVM for the TCI builds
- improve the insn tracking plugin
- cleanups to the lockstep plugin
- free plugin data on cpu finalise
- assert cpu->index assigned
- move qemu_plugin_vcpu_init__async into plugin code
- add support for dynamic gdb command tables
- allow targets to extend gdb capabilities
- enable user-mode MTE support
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmaH3bEACgkQ+9DbCVqe
KkTnvwf9HS68sTICEJqBfY663hjcfdFGsSV/h3q7SN3fhKm/3JHGNK+kumgqdnaC
ykd7tx0AtBGgKm83B7G6MPywsVMIosMeV3mFeJTVHhKsFwGNjSiGkr3j4R2qxjFt
nYQ977FqBKyhvhSplR2wwhwi+JpuGWFGlnQTvdF2Z7ni4YCDFcbl4eiMyGwsjbWm
0VBP+wCSSMIIbS9Qb7DrhZlfu0+wKZK/q0FLzVVofcLSXGou+Mse/qhtG+yAU/FI
qqqV+7J4PU9E4BqFaklxyRtBrpXNDgpo77pu6ZR7oDXD7HNMuIAuEIlkxMJjarNM
xN64WOOzw15R2RMVyXdYx6ccxWft2Q==
=9Gmk
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-july24-050724-1' of https://gitlab.com/stsquad/qemu into staging
Updates for testing, plugins, gdbstub
- restore some 32 bit host builds and testing
- move some physmem tracepoint definitions
- use --userns keep-id for podman builds
- cleanup check-tcg compiler flag checking for Arm
- fix some casting in fcvt test
- tweak check-tcg inline asm for clang
- suppress some invalid clang warnings
- disable KVM for the TCI builds
- improve the insn tracking plugin
- cleanups to the lockstep plugin
- free plugin data on cpu finalise
- assert cpu->index assigned
- move qemu_plugin_vcpu_init__async into plugin code
- add support for dynamic gdb command tables
- allow targets to extend gdb capabilities
- enable user-mode MTE support
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmaH3bEACgkQ+9DbCVqe
# KkTnvwf9HS68sTICEJqBfY663hjcfdFGsSV/h3q7SN3fhKm/3JHGNK+kumgqdnaC
# ykd7tx0AtBGgKm83B7G6MPywsVMIosMeV3mFeJTVHhKsFwGNjSiGkr3j4R2qxjFt
# nYQ977FqBKyhvhSplR2wwhwi+JpuGWFGlnQTvdF2Z7ni4YCDFcbl4eiMyGwsjbWm
# 0VBP+wCSSMIIbS9Qb7DrhZlfu0+wKZK/q0FLzVVofcLSXGou+Mse/qhtG+yAU/FI
# qqqV+7J4PU9E4BqFaklxyRtBrpXNDgpo77pu6ZR7oDXD7HNMuIAuEIlkxMJjarNM
# xN64WOOzw15R2RMVyXdYx6ccxWft2Q==
# =9Gmk
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 05 Jul 2024 04:49:05 AM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
* tag 'pull-maintainer-july24-050724-1' of https://gitlab.com/stsquad/qemu: (40 commits)
tests/tcg/aarch64: Add MTE gdbstub tests
gdbstub: Add support for MTE in user mode
gdbstub: Use true to set cmd_startswith
gdbstub: Pass CPU context to command handler
gdbstub: Make hex conversion function non-internal
target/arm: Factor out code for setting MTE TCF0 field
target/arm: Make some MTE helpers widely available
target/arm: Fix exception case in allocation_tag_mem_probe
gdbstub: Add support for target-specific stubs
gdbstub: Move GdbCmdParseEntry into a new header file
gdbstub: Clean up process_string_cmd
accel/tcg: Move qemu_plugin_vcpu_init__async() to plugins/
plugins: Free CPUPluginState before destroying vCPU state
plugins: Ensure vCPU index is assigned in init/exit hooks
plugins/lockstep: clean-up output
plugins/lockstep: mention the one-insn-per-tb option
plugins/lockstep: make mixed-mode safe
plugins/lockstep: preserve sock_path
test/plugins: preserve the instruction record over translations
test/plugin: make insn plugin less noisy by default
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add tests to exercise the MTE stubs. The tests will only run if a
version of GDB that supports MTE is available in the test environment.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
[AJB: re-base and checkpatch fixes]
Message-Id: <20240628050850.536447-12-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-41-alex.bennee@linaro.org>
This commit implements the stubs to handle the qIsAddressTagged,
qMemTag, and QMemTag GDB packets, allowing all GDB 'memory-tag'
subcommands to work with QEMU gdbstub on aarch64 user mode. It also
implements the get/set functions for the special GDB MTE register
'tag_ctl', used to control the MTE fault type at runtime.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20240628050850.536447-11-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-40-alex.bennee@linaro.org>
cmd_startswith is a boolean so use 'true' to set it instead of 1.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20240628050850.536447-10-gustavo.romero@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-39-alex.bennee@linaro.org>
Allow passing the current CPU context to command handlers via user_ctx
when the handler requires it.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20240628050850.536447-9-gustavo.romero@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-38-alex.bennee@linaro.org>
Make gdb_hextomem non-internal so it's not confined to use only in
gdbstub.c.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240628050850.536447-8-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-37-alex.bennee@linaro.org>
Factor out the code used for setting the MTE TCF0 field from the prctl
code into a convenient function. Other subsystems, like gdbstub, need to
set this field as well, so keep it as a separate function to avoid
duplication and ensure consistency in how this field is set across the
board.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20240628050850.536447-7-gustavo.romero@linaro.org>
[AJB: clean-up includes, move MTE defines]
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-36-alex.bennee@linaro.org>
Make the MTE helpers allocation_tag_mem_probe, load_tag1, and store_tag1
available to other subsystems.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240628050850.536447-6-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-35-alex.bennee@linaro.org>
If page in 'ptr_access' is inaccessible and probe is 'true'
allocation_tag_mem_probe should not throw an exception, but currently it
does, so fix it.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240628050850.536447-5-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-34-alex.bennee@linaro.org>
Currently, it's not possible to have stubs specific to a given target,
even though there are GDB features which are target-specific, like, for
instance, memory tagging.
This commit introduces gdb_extend_qsupported_features,
gdb_extend_query_table, and gdb_extend_set_table functions as interfaces
to extend the qSupported string, the query handler table, and the set
handler table, allowing target-specific stub implementations.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240628050850.536447-4-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-33-alex.bennee@linaro.org>
Move GdbCmdParseEntry and its associated types into a separate header
file to allow the use of GdbCmdParseEntry and other gdbstub command
functions outside of gdbstub.c.
Since GdbCmdParseEntry and get_param are now public, kdoc
GdbCmdParseEntry and rename get_param to gdb_get_cmd_param.
This commit also makes gdb_put_packet public since is used in gdbstub
command handling.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240628050850.536447-3-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-32-alex.bennee@linaro.org>
Change 'process_string_cmd' to return true on success and false on
failure, instead of 0 and -1.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240628050850.536447-2-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-31-alex.bennee@linaro.org>
Calling qemu_plugin_vcpu_init__async() on the vCPU thread
is a detail of plugins, not relevant to TCG vCPU management.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240606124010.2460-4-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-30-alex.bennee@linaro.org>
cpu::plugin_state is allocated in cpu_common_initfn() when
the vCPU state is created. Release it in cpu_common_finalize()
when we are done.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240606124010.2460-3-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-29-alex.bennee@linaro.org>
Since vCPUs are hashed by their index, this index can't
be uninitialized (UNASSIGNED_CPU_INDEX).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240606124010.2460-2-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-28-alex.bennee@linaro.org>
We were repeating information which wasn't super clear. As we already
will have dumped the last failing PC just note the divergence and dump
the previous instruction log.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-27-alex.bennee@linaro.org>
This really helps with lockstep although its super slow on big jobs.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-26-alex.bennee@linaro.org>
