The new parameter is unused yet.
This part was missing in commit 787e4a8500.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 787e4a85 [block: Add options QDict to bdrv_file_open() prototypes] didn't
update rbd.c accordingly.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A file name may only specified if no host or socket path is specified.
The latter two may not appear at the same time either.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The URL method already takes care to apply the default port when none is
specfied. Directly specifying driver-specific options required the port
number until now. Allow leaving it out and apply the default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In order to achieve this, the .bdrv_probe callbacks of all drivers must
cope with this. The DMG driver is the only one that bases its decision
on the filename and it needs to be changed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a driver needs structured data and not just a string, it can provide
a .bdrv_parse_filename callback now that parses the command line string
into separate options. Keeping this separate from .bdrv_open_filename
ensures that the preferred way of directly specifying the options always
works as well if parsing the string works.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The existing parsers for the file name now parse everything into the
bdrv_open() options QDict. Instead of using these parsers, you can now
directly specify the options on the command line, like this:
qemu-system-x86_64 -drive file=nbd:,file.port=1234,file.host=::1
Clearly the file=... part could use further improvement, but it's a
start.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The NBD block supports an URL syntax, for which a URL parser returns
separate hostname and port fields. It also supports the traditional qemu
syntax encoded in a filename. Until now, after parsing the URL to get
each piece of information, a new string is built to be fed to socket
functions.
Instead of building a string in the URL case that is immediately parsed
again, parse the string in both cases and use the QemuOpts interface to
qemu-sockets.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Need to pass an options QDict to qcow2_open() now. This fixes a segfault
on the migration target with qcow2.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sheepdog (neither quorum nor unsafe mode) will refuse to serve IO requests when
number of alive nodes is less than that of copies specified by users. This will
return 0x19 to QEMU client which currently doesn't recognize it.
This patch adds an error description when QEMU client receives it, other than
plainly printing 'Invalid error code'
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that each AioContext has a ThreadPool and the main loop AioContext
can be fetched with bdrv_get_aio_context(), we can eliminate the concept
of a global thread pool from thread-pool.c.
The submit functions must take a ThreadPool* argument.
block/raw-posix.c and block/raw-win32.c use
aio_get_thread_pool(bdrv_get_aio_context(bs)) to fetch the main loop's
ThreadPool.
tests/test-thread-pool.c must be updated to reflect the new
thread_pool_submit() function prototypes.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
If an io_flush handler is not set, qemu_aio_wait doesn't invoke
callbacks.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using a blocking socket in the coroutine context reduces the chance of
switching to other work. This patch makes the sheepdog driver use a
non-blocking fd always.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Otherwise, live migration of the top layer will miss zero clusters and
let the backing file show through. This also matches what is done in qed.
QCOW2_CLUSTER_ZERO clusters are invalid in v2 image files. Check this
directly in qcow2_get_cluster_offset instead of replicating the test
everywhere.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We already flush when the function completes. There is no need to flush
after every compressed cluster.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The update_cluster_refcount() function increments/decrements a cluster's
refcount and then returns the new refcount value.
There is no need to flush since both update_cluster_refcount() callers
already take care of this:
1. qcow2_alloc_bytes() calls update_cluster_refcount() when compressed
sectors will be appended to an existing cluster with enough free
space. qcow2_alloc_bytes() already flushes so there is no need to do
so in update_cluster_refcount().
2. qcow2_update_snapshot_refcount() sets a cache dependency on refcounts
if it needs to update L2 entries. It also flushes before completing.
Removing this flush significantly speeds up qcow2 snapshot creation:
$ qemu-img create -f qcow2 test.qcow2 -o size=50G,preallocation=metadata
$ time qemu-img snapshot -c new test.qcow2
Time drops from more than 3 minutes to under 1 second.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Users of qcow2_update_snapshot_refcount() do not flush consistently.
qcow2_snapshot_create() flushes but qcow2_snapshot_goto() and
qcow2_snapshot_delete() do not.
Solve this by moving the bdrv_flush() into
qcow2_update_snapshot_refcount().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Compressed writes use qcow2_alloc_bytes() to allocate space with byte
granularity. The affected clusters' refcounts will be incremented but
we do not need to flush yet.
Set a L2 cache dependency on the refcount block cache, so that the
refcounts get written out before the L2 updates.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since qcow2 metadata is cached we need to flush the caches, not just the
underlying file. Use bdrv_flush(bs) instead of bdrv_flush(bs->file).
Also add the error return path when bdrv_flush() fails and move the
flush after checking for qcow2_alloc_clusters() failure so that the
qcow2_alloc_clusters() error return value takes precedence.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
update_refcount() affects the refcount cache, it does not write to disk.
Therefore bdrv_flush(bs->file) does nothing. We need to flush the
refcount cache in order to write out the refcount updates!
While we're here also add error returns when qcow2_cache_flush() fails.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2 images now accept a boolean lazy_refcounts options. Use it like
this:
-drive file=test.qcow2,lazy_refcounts=on
If the option is specified on the command line, it overrides the default
specified by the qcow2 header flags that were set when creating the
image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It doesn't do anything yet except storing the options QDict in the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch adds iscsi_truncate which effectively allows for
online resizing of iscsi volumes. for this to work you have
to resize the volume on your storage and then call
block_resize command in qemu which will issue a
readcapacity16 to update the capacity.
v4:
- factor out complete readcapacity logic into a separate function
- handle capacity change check condition in readcapacity function
(this happens if the block_resize cmd is the first iscsi task
executed after a resize on the storage)
v3:
- remove switch statement in iscsi_open
- create separate patch for brdv_drain_all() in bdrv_truncate()
v2:
- add a general bdrv_drain_all() before bdrv_truncate() to avoid
in-flight AIOs while the device is truncated
- since no AIOs are in flight we can use a sync libiscsi call
to re-read the capacity
- factor out the readcapacity16 logic as it is redundant
to iscsi_open() and iscsi_truncate().
Signed-off-by: Peter Lieven <pl@kamp.de>
[allow any type of unit attention check condition in iscsi_readcapacity_sync(),
as in Message-ID: <51263A2A.6070304@dlhnet.de> - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
the storage might return a check condition status for various reasons.
(e.g. bus reset, capacity change, thin-provisioning info etc.)
currently all these informative status responses lead to an I/O error
which is populated to the guest. this patch introduces a retry mechanism
to avoid this.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support for a unix domain socket for a connection
between qemu and local sheepdog server. You can use the unix domain
socket with the following syntax:
$ qemu sheepdog+unix:///<vdiname>?socket=<socket path>[#snapid]
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This uses the form "<host>:<port>" for the representation of the
sheepdog server to use inet_connect.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The URI syntax is consistent with the NBD and Gluster syntax. The
syntax is
sheepdog[+tcp]://[host:port]/vdiname[#snapid|#tag]
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qemu-img check command can display fragmentation statistics:
* Total number of clusters in virtual disk
* Number of allocated clusters
* Number of fragmented clusters
This patch adds fragmentation statistics support to qcow2.
Compressed and normal clusters count as allocated. Zero clusters are
not counted as allocated unless their L2 entry has a non-zero offset
(e.g. preallocation).
Only the current L1 table counts towards the statistics - snapshots are
ignored.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The check_refcounts_l1/l2() functions have a check_copied argument to
check that the QCOW_O_COPIED flag is consistent with refcount == 1.
This should be a bool, not an int.
However, the next patch introduces qcow2 fragmentation statistics and
also needs to pass an option to check_refcounts_l1/l2(). This is a good
opportunity to use an int flags field.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the support for reporting the image end offset (in
bytes). This is particularly useful after a conversion (or a rebase)
where the destination is a block device in order to find the first
unused byte at the end of the image.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The curl_easy_setopt(state->curl, CURLOPT_PROTOCOLS, ...) interface was
introduced in libcurl 7.19.4. Therefore we cannot protect against
CVE-2013-0249 when linking against an older libcurl.
This fixes the build failure introduced by
fb6d1bbd24.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Andreas Färber <andreas.faeber@web.de>
Message-id: 1360743934-8337-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit f880defbb0.
Jeff Cody's testing revealed that the interpretation of size differs
even between VirtualPC and HyperV. Revert this so there is time to
consider the impact of any backwards incompatible behavior this change
creates.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Linux block devices can be set read-only with "blockdev --setro
<device>". The same thing can be done for LVM volumes using "lvchange
--permission r <volume>". This read-only setting is independent of
device node permissions. Therefore the device can still be opened
O_RDWR but actual writes will fail.
This results in odd behavior for QEMU. bdrv_open() is supposed to fail
if a read-only image is being opened with BDRV_O_RDWR. By not failing
for Linux block devices, the guest boots up but every write produces an
I/O error.
This patch checks whether the block device is read-only so that Linux
block devices behave like regular files.
Reported-by: Sibiao Luo <sluo@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The size calculated from the CHS values is not the real image (disk) size,
but usually a smaller value. This is caused by rounding effects.
Only older operating systems use CHS. Such guests won't be able to use
the whole disk. All modern operating systems use the real size.
This patch fixes https://bugs.launchpad.net/qemu/+bug/1105670/.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1360265212-22037-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is a buffer overflow in libcurl POP3/SMTP/IMAP. The workaround is
simple: disable extra protocols so that they cannot be exploited. Full
details here:
http://curl.haxx.se/docs/adv_20130206.html
QEMU only cares about HTTP, HTTPS, FTP, FTPS, and TFTP. I have tested
that this fix prevents the exploit on my host with
libcurl-7.27.0-5.fc18.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit eeb6b45d48 (block: raw-posix image
file reopen) broke the build on OpenIndiana.
illumos has no O_ASYNC. Exclude it from flags to be compared
and instead assert that it is not set where defined.
Cf. e61ab1da7e for qemu-ga.
Cc: qemu-stable@nongnu.org (1.3.x)
Cc: Jeff Cody <jcody@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The previous scanf() format string stopped parsing the file name on the
first white white space, which seems to be allowed at least by VMware
Workstation.
Change the format string to collect everything between the first and
second quote as the file name, disallowing line breaks.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Return -errno instead of -1 on errors. Hey, no memory leak to fix here
while we're touching it!
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The buffers are allocated with g_(re)alloc, so use g_free to free them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Return -errno instead of -1 on errors and add error checks in some
places that didn't have one. Passing things by reference requires more
correct typing, replaced a few off_ts therefore - with a 32-bit off_t
this is even a fix for truncation bugs.
While touching the code, fix even some more memory leaks than in the
other drivers...
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Return -errno instead of -1 on errors. While touching the
code, fix a memory leak.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Return -errno instead of -1 on errors. While touching the
code, fix a memory leak.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Return -errno instead of -1 on errors. While touching the
code, fix a memory leak.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sheep daemon needs vdi_id to identify which vdi is closed to release resources
such as object cache.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce a new option "adapter_type" when converting to vmdk images.
It can be one of the following: ide (default), buslogic, lsilogic
or legacyESX (according to the vmdk spec from vmware).
In case of a non-ide adapter, heads is set to 255 instead of the 16.
The latter is used for "ide".
Also see LP#545089
Signed-off-by: Othmar Pasteka <pasteka@kabsi.at>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
