Store the property in a CharBackend instead of CharDriverState*. This
also replace systematically chr by chr.chr to access the
CharDriverState*. The following patches will replace it with calls to
qemu_chr_fe CharBackend functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit b6607a1a20, serial_hds_isa_init() was introduced to
factor out serial_isa_init() loops. However, sun4uv shouldn't start from
0 when there is a mm serial on 0 already. Add a "from" argument to
serial_hds_isa_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
16550A UART device uses an oscillator to generate frequencies
(baud base), which decide communication speed. This speed could
be changed by dividing it by a divider. If the divider is
greater than the baud base, speed is set to zero, leading to a
divide by zero error. Add check to avoid it.
Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1476251888-20238-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ports enter a "throttled" state when writing to the chardev would block.
The current output VirtQueueElement is kept around until the chardev
becomes writable again.
There are several places in the virtio-serial lifecycle where the
VirtQueueElement should be thrown away. For example, if the virtio
device is reset then virtqueue elements are no longer valid.
This patch adds the discard_throttle_data() function to unmap the
scatter-gather list and decrement vq->inuse. This ensures that the
VirtQueueElement is freed properly.
Cc: amit.shah@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for enabling the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. The previous patch introduced
the plumbing required for this; now we expose the virtio feature to
the guest. The feature is disabled for compatibility machines to avoid
exposing a new feature to existing guests.
As required by the virtio 1.0 spec, the emergency write functionality
is available to the guest even if the guest doesn't negotatiate the
feature, as well as before feature negotation.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the infrastructure required for the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. Because we don't touch the
size of the configuration area, guests will not be able to actually
make use of this without further patches.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.
We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The write_console_data() method in sclpconsole-lm.c checks
whether the return value of qemu_chr_fe_write() has the
value of -EAGAIN and if so then increments the buffer offset
by the value of EAGAIN. Fortunately qemu_chr_fe_write() will
never return EAGAIN directly, rather it returns -1 with
errno set to EAGAIN, so this broken code path was not
reachable. The behaviour on EAGAIN was stil bad though,
causing the write_console_data() to busy_wait repeatedly
calling qemu_chr_fe_write() with no sleep between iters.
Just remove all this loop logic and replace with a call
to qemu_chr_fe_write_all().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The isa_register_portio_list() function allocates ioports
data/state. Let's keep the reference to this data on some owner. This
isn't enough to fix leaks, but at least, ASAN stops complaining of
direct leaks. Further cleanup would require calling
portio_list_del/destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The virtio-console.c file handles both serial consoles
and interactive consoles, since they're backed by the
same device model.
Since serial devices are expected to be reliable and
need to notify the guest when the backend is opened
or closed, the virtio-console.c file wires up support
for chardev events. This affects both serial consoles
and interactive consoles, using a network connection
based chardev backend such as 'socket', but not when
using a PTY based backend or plain 'file' backends.
When the host side is not connected the handle_output()
method in virtio-serial-bus.c will drop any data sent
by the guest, before it even reaches the virtio-console.c
code. This means that if the chardev has a logfile
configured, the data will never get logged.
Consider for example, configuring a x86_64 guest with a
plain UART serial port
-chardev socket,id=charserial1,host=127.0.0.1,port=9001,server,nowait,logfile=console1.log,logappend=on
-device isa-serial,chardev=charserial1,id=serial1
vs a s390 guest which has to use the virtio-console port
-chardev socket,id=charconsole1,host=127.0.0.1,port=9000,server,nowait,logfile=console2.log,logappend=on
-device virtconsole,chardev=charconsole1,id=console1
The isa-serial one gets data written to the log regardless
of whether a client is connected, while the virtioconsole
one only gets data written to the log when a client is
connected.
There is no need for virtio-serial-bus.c to aggressively
drop the data for console devices, as the chardev code is
prefectly capable of discarding the data itself.
So this patch changes virtconsole devices so that they
are always marked as having the host side open. This
ensures that the guest OS will always send any data it
has (Linux virtio-console hvc driver actually ignores
the host open state and sends data regardless, but we
should not rely on that), and also prevents the
virtio-serial-bus code prematurely discarding data.
The behaviour of virtserialport devices is *not* changed,
only virtconsole, because for the former, it is important
that the guest OSknow exactly when the host side is opened
/ closed so it can do any protocol re-negotiation that may
be required.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1599214
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1470241360-3574-2-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Forcibly convert it to a vmstate wrapper; proper conversion
comes later.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-serial-bus has had version 3 since 37f95bf3d0 in 0.13-rc0;
it's time to clean it up a bit.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Otherwise, a serial port can get stuck if it is migrated while flow control
is in effect.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Otherwise, this can cause serial_xmit to be entered with LSR.TEMT=0,
which is invalid and causes an assertion failure.
Reported-by: Bret Ketchum <bcketchum@gmail.com>
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_source_attach can return any value between 1 and UINT_MAX if you let
QEMU run long enough. However, qemu_chr_fe_add_watch can also return
a negative errno value when the device is disconnected or does not
support chr_add_watch. Change it to return zero to avoid overloading
these values.
Fix the cadence_uart which asserts in this case (easily obtained with
"-serial pty").
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
serial_xmit starts transmission of whatever is in the transmitter
register, THR or FIFO; serial_watch_cb is a wrapper around it and is
only used as a qemu_chr_fe_add_watch callback.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move common code outside the if, and reset tsr_retry even in loopback mode.
Right now it cannot become non-zero, but it will be possible as soon as
we start respecting the baud rate.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It can never become negative; reflect this in the type of the field
and simplify the conditions.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If qemu_chr_fe_write() returns an error (represented by a negative
number) we should skip incrementing the count and initiating a
memmove().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 667e5dc534d33338fcfc2471e5aa32fe7cbd13dc.1466546703.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
=eUnF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all trace-events for files in the hw/char/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-9-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The old milkymist.org domain just forwards to mm-labs.hk nowadays. I've
created a mirror of the documents.
Signed-off-by: Michael Walle <michael@walle.cc>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous commit e7c9136977
(hw/char: QOM'ify escc.c) cause qemu-system-ppc/ppc64
OpenBIOS to freeze on startup, this commit fix it.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <1464767898-30526-1-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* drop qemu_char_get_next_serial and use chardev prop
* create xilinx_uartlite_create wrapper function to create
xilinx_uartlite device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-6-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-5-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-4-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* create cadence_uart_create wrapper function to create
cadence_uart_device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-3-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* add pl011_create wrapper function to create pl011 uart device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-2-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
drop the qemu_char_get_next_serial and use chardev prop instead
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-6-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
* Add lm32_uart_create function to create lm32 uart device
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-5-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-4-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
* Add etraxfs_ser_create function to create etraxfs serial device
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-3-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-2-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cadence_uart_init() initializes an I/O memory region of size 0x1000
bytes. However in uart_write(), the 'offset' parameter (offset within
region) is divided by 4 and then used to index the array 'r' of size
CADENCE_UART_R_MAX which is much smaller: (0x48/4). If 'offset>>=2'
exceeds CADENCE_UART_R_MAX, this will cause an out-of-bounds memory
write where the offset and the value are controlled by guest.
This will corrupt QEMU memory, in most situations this causes the vm to
crash.
Fix by checking the offset against the array size.
Cc: qemu-stable@nongnu.org
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20160418100735.GA517@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
At present only the core UART functions (data path for tx/rx) are
implemented, which is enough for UEFI to boot. The following
features/registers are unimplemented:
* Line/modem control
* Scratch register
* Extra control
* Baudrate
* SPI interfaces
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1457467526-8840-3-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An upcoming patch will alter how simple unions, like InputEvent, are
laid out, which will impact all lines of the form 'evt->u.XXX'
(expanding it to the longer 'evt->u.XXX.data'). For better
legibility in that patch, and less need for line wrapping, it's better
to use a temporary variable to reduce the effect of a layout change to
just the variable initializations, rather than every reference within
an InputEvent.
There was one instance in hid.c:hid_pointer_event() where the code
was referring to evt->u.rel inside the case label where evt->u.abs
is the correct name; thankfully, both members of the union have the
same type, so it happened to work, but it is now cleaner.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-8-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move allocation to virtio functions also when loading/saving a
VirtQueueElement. This will also let the load/save functions
keep backwards compatibility when the VirtQueueElement layout
is changed.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The return code of virtqueue_pop/vring_pop is unused except to check for
errors or 0. We can thus easily move allocation inside the functions
and just return a pointer to the VirtQueueElement.
The advantage is that we will be able to allocate only the space that
is needed for the actual size of the s/g list instead of the full
VIRTQUEUE_MAX_SIZE items. Currently VirtQueueElement takes about 48K
of memory, and this kind of allocation puts a lot of stress on malloc.
By cutting the size by two or three orders of magnitude, malloc can
use much more efficient algorithms.
The patch is pretty large, but changes to each device are testable
more or less independently. Splitting it would mostly add churn.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-36-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-15-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-14-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1453832250-766-8-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-7-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-5-git-send-email-peter.maydell@linaro.org
In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.
One such library will be libxenforeignmemory which provides access to
privileged foreign mappings and which will provide an interface
equivalent to xc_map_foreign_{pages,bulk}.
The new xenforeignmemory_map() function behaves like
xc_map_foreign_pages() when the err argument is NULL and like
xc_map_foreign_bulk() when err is non-NULL, which maps into the shim
here onto checking err == NULL and calling the appropriate old
function.
Note that xenforeignmemory_map() takes the number of pages before the
arrays themselves, in order to support potentially future use of
variable-length-arrays in the prototype (in the future, when Xen's
baseline toolchain requirements are new enough to ensure VLAs are
supported).
In preparation for adding support for libxenforeignmemory add support
to the <=4.0 and <=4.6 compat code in xen_common.h to allow us to
switch to using the new API. These shims will disappear for versions
of Xen which include libxenforeignmemory.
Since libxenforeignmemory will have its own handle type but for <= 4.6
the functionality is provided by using a libxenctrl handle we
introduce a new global xen_fmem alongside the existing xen_xc. In fact
we make xen_fmem a pointer to the existing xen_xc, which then works
correctly with both <=4.0 (xc handle is an int) and <=4.6 (xc handle
is a pointer). In the latter case xen_fmem is actually a double
indirect pointer, but it all falls out in the wash.
Unlike libxenctrl libxenforeignmemory has an explicit unmap function,
rather than just specifying that munmap should be used, so the unmap
paths are updated to use xenforeignmemory_unmap, which is a shim for
munmap on these versions of xen. The mappings in xen-hvm.c do not
appear to be unmapped (which makes sense for a qemu-dm process)
In fb_disconnect this results in a change from simply mmap over the
existing mapping (with an implicit munmap) to expliclty unmapping with
xenforeignmemory_unmap and then mapping the required anonymous memory
in the same hole. I don't think this is a problem since any other
thread which was racily touching this region would already be running
the risk of hitting the mapping halfway through the call. If this is
thought to be a problem then we could consider adding an extra API to
the libxenforeignmemory interface to replace a foreign mapping with
anonymous shared memory, but I'd prefer not to.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.
One such library will be libxenforeignmemory which provides access to
privileged foreign mappings and which will provide an interface
equivalent to xc_map_foreign_{pages,bulk}.
In preparation for this switch all uses of xc_map_foreign_range to
xc_map_foreign_pages. This is trivial because size was always
XC_PAGE_SIZE so the necessary adjustments are trivial:
* Pass &mfn (an array of length 1) instead of mfn. The function
takes a pointer to const, so there is no possibily of mfn changing
due to this change.
* Pass nr_pages=1 instead of size=XC_PAGE_SIZE
There is one wrinkle in xen_console.c:con_initialise() where
con->ring_ref is an int but can in some code paths (when !xendev->dev)
be treated as an mfn. I think this is an existing latent truncation
hazard on platforms where xen_pfn_t is 64-bit and int is 32-bit (e.g.
amd64, both arm* variants). I'm unsure under what circumstances
xendev->dev can be NULL or if anything elsewhere ensures the value
fits into an int. For now I just use a temporary xen_pfn_t to in
effect upcast the pointer from int* to xen_pfn_t*.
In xenfb.c:common_bind we now explicitly launder the mfn into a
xen_pfn_t, so it has the correct type to be passed to
xc_map_foreign_pages and doesn't provoke warnings on 32-bit x86.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.
One such library will be libxengnttab which provides access to grant
tables.
In preparation for this switch the compatibility layer in xen_common.h
(which support building with older versions of Xen) to use what will
be the new library API. This means that the gnttab shim will disappear
for versions of Xen which include libxengnttab.
To simplify things for the <= 4.0.0 support we wrap the int fd in a
malloc(sizeof int) such that the handle is always a pointer. This
leads to less typedef headaches and the need for
XC_HANDLER_INITIAL_VALUE etc for these interfaces.
Note that this patch does not add any support for actually using
libxengnttab, it just adjusts the existing shims.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
All of the work in con_disconnect applies to the primary console case
(when xendev->dev is NULL). Therefore remove the early check and bail
and allow it to fall through. All of the existing code is correctly
conditional already.
The ->dev and ->gnttabdev handles are either both set or neither. For
consistency with con_initialise() with to the former here too.
With this con_initialise and con_disconnect now mirror each other.
Fix up a hard tab in the function while editing.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OVhB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2016-01-13' into staging
Error reporting patches for 2016-01-13
# gpg: Signature made Wed 13 Jan 2016 14:21:48 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2016-01-13: (41 commits)
checkpatch: Detect newlines in error_report and other error functions
error: Consistently name Error * objects err, and not errp
s390/sclp: Simplify control flow in sclp_realize()
hw/s390x: Rename local variables Error *l_err to just err
error: Clean up errors with embedded newlines (again)
vhdx: Fix "log that needs to be replayed" error message
pci-assign: Clean up "Failed to assign" error messages
vmdk: Clean up "Invalid extent lines" error message
vmdk: Clean up control flow in vmdk_parse_extents() a bit
error: Strip trailing '\n' from error string arguments (again)
qemu-io qemu-nbd: Use error_report() etc. instead of fprintf()
migration: Use error_reportf_err() instead of monitor_printf()
spapr: Use error_reportf_err()
error: Use error_prepend() where it makes obvious sense
error: Use error_reportf_err() where it makes obvious sense
error: Don't decorate original error message when adding to it
error: New error_prepend(), error_reportf_err()
test-throttle: Simplify qemu_init_main_loop() error handling
qemu-nbd: Clean up "Failed to load snapshot" error message
block: Clean up "Could not create temporary overlay" error message
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Printing CPU registers is not helpful during machine initialization.
Moreover, these are straightforward configuration or "can get
resources" errors, so dumping core isn't appropriate either. Replace
hw_error() by error_report(); exit(1). Matches how we report these
errors in other machine initializations.
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-2-git-send-email-armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Done with this Coccinelle semantic patch:
@@
type T;
identifier FUN, RET;
expression list ARGS;
expression ERR, EC;
@@
(
- T RET = FUN(ARGS, &ERR);
+ T RET = FUN(ARGS, &error_fatal);
|
- RET = FUN(ARGS, &ERR);
+ RET = FUN(ARGS, &error_fatal);
|
- FUN(ARGS, &ERR);
+ FUN(ARGS, &error_fatal);
)
- if (ERR != NULL) {
- error_report_err(ERR);
- exit(EC);
- }
This is actually a more elegant version of my initial semantic patch
by courtesy of Eduardo.
It leaves dead Error * variables behind, cleaned up manually.
Cc: qemu-arm@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1452068575-21543-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for input-related code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-20-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This also fixes a minor bug:
- virtqueue_map_sg(port->elem.out_sg, port->elem.out_addr,
- port->elem.out_num, 1);
is wrong: out_sg is not written so should not be marked dirty.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
The goal is to have debug code always compiled during build.
We standardize all debug output on the following format:
[QOM_TYPE_NAME]reporting_function: debug message
We also replace IPRINTF with qemu_log_mask(). The qemu_log_mask() output
is following the same format as the above debug.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 47b8759b251d356c633faf7ea34f897f340aea4e.1445781957.git.jcd@tribudubois.net
[PMM: Drop attempt to print the ram_addr of a memory region in
one DPRINTF, which (a) was using the wrong format string so
didn't build on 32-bit and (b) was incorrectly looking at a
private field of a MemoryRegion struct]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ESCC is a serial port controller, so add it
to the input category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Generate an interrupt if the tx buffer is empty and the tx empty interrupt
is enabled. This fixes a problem seen when running a Linux image since
Linux commit 55c3cb1358e ("serial: imx: remove unneeded imx_transmit_buffer()
from imx_start_tx()"). Linux now waits for the tx empty interrupt before
starting to send data, causing transmit stalls until there is an interrupt
for another reason.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
My Coccinelle semantic patch finds a few more, because it also fixes up
the equally pointless conditional
if (foo) {
free(foo);
foo = NULL;
}
Result (feel free to squash it into your patch):
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit ef546f1275 ("virtio: add
feature checking helpers") introduced a helper __virtio_has_feature.
We don't want to use reserved identifiers, though, so let's
rename __virtio_has_feature to virtio_has_feature and virtio_has_feature
to virtio_vdev_has_feature.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert the KZM board to use the i.MX31 SoC defintition instead of
redefining the entire SoC on the machine level. Major rewrite of the
machine init code.
While touching the memory map comment de-indent to the correct level
of indentation.
This obsoletes the legacy i.MX device device creation helpers which are removed.
Tested by booting a minimal Linux system on the emulated platform
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 5e783561f092e1c939562fdff001f1ab1194b07f.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* vhost-scsi fix from Igor and Lu Lina
* a build system fix from Daniel
* two more multi-arch-related patches from Peter C.
* TCG patches from myself and Sergey Fedorov
* RCU improvement from Wen Congyang
* a few more simple cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVzmCgAAoJEL/70l94x66DhFgH/1m3iGac2Ks3vAUAdS2HBcxC
EeziMwWFmkrfbtzUkz/jE0NG5uA2Bs8OFHsC8vmQFwkpDbGUlJ1zd5/N5UOHMG3d
zF0vd+nKNw9C1Fo0/LPyQSeP64/xXEMTmFLqmYf4ZOowz8lr/m6WYrMIzKUoXSEn
FeRtq78moDT8qwF372j8aoQUUpsctXDHBQHORZdcERvlc4mxojeJ3+mNViR2bv3r
92PwGvrJ26mQXEKmGo5O1VM4k7QVg7xJQfgE11x7ShE2E9fJDMgts0Q/xCjWCLwS
BXtEtbd9QeFEfG/mlRFevGtuvksq98m0hN7lAWb13zWmlJFuLyyMmlGfGAlU55Q=
=Y2DB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* SCSI fixes from Stefan and Fam
* vhost-scsi fix from Igor and Lu Lina
* a build system fix from Daniel
* two more multi-arch-related patches from Peter C.
* TCG patches from myself and Sergey Fedorov
* RCU improvement from Wen Congyang
* a few more simple cleanups
# gpg: Signature made Fri 14 Aug 2015 22:41:52 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
disas: Defeature print_target_address
hw: fix mask for ColdFire UART command register
scsi-generic: identify AIO callbacks more clearly
scsi-disk: identify AIO callbacks more clearly
scsi: create restart bottom half in the right AioContext
configure: only add CONFIG_RDMA to config-host.h once
qemu-nbd: remove unnecessary qemu_notify_event()
vhost-scsi: Clarify vhost_virtqueue_mask argument
exec: use macro ROUND_UP for alignment
rcu: Allow calling rcu_(un)register_thread() during synchronize_rcu()
exec: drop cpu_can_do_io, just read cpu->can_do_io
cpu_defs: Simplify CPUTLB padding logic
cpu-exec: Do not invalidate original TB in cpu_exec_nocache()
vhost/scsi: call vhost_dev_cleanup() at unrealize() time
virtio-scsi-test: Add test case for tail unaligned WRITE SAME
scsi-disk: Fix assertion failure on WRITE SAME
tests: virtio-scsi: clear unit attention after reset
scsi-disk: fix cmd.mode field typo
virtio-scsi: use virtqueue_map_sg() when loading requests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "chardev" property initialization might have failed (for example because
there are not enough chardevs provided by QEMU).
The serial device emulator needs to be able to work with an uninitialized
(NULL) chardev device pointer.
This patch adds some missing tests on the chr pointer value before
using it.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1438342461-18967-1-git-send-email-jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Don't assume a specific layout for control messages.
Required by virtio 1.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
There's a call to object_dynamic_cast() in spapr_vty which uses the type
name "spapr-vty" directly, instead of the usual idiom of using the #defined
TYPE_VIO_SPAPR_VTY_DEVICE. Fix it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
If a guest passes the reg property of a valid VIO object that is not a VTY
to either H_GET_TERM_CHAR or H_PUT_TERM_CHAR, QEMU hits a dynamic cast
assertion and aborts.
PAPR+ says "Hypervisor checks the termno parameter for validity against the
Vterm IOA unit addresses assigned to the partition, else return H_Parameter."
This patch adds a type check to ensure vty_lookup() either returns a pointer
to a valid VTY object or NULL. H_GET_TERM_CHAR and H_PUT_TERM_CHAR will
now return H_PARAMETER to the guest instead of crashing.
The patch has no effect on the reg == 0 hack used to implement the RTAS call
display-character.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The code for -machine pseries maintains a global sPAPREnvironment structure
which keeps track of general state information about the guest platform.
This predates the existence of the MachineState structure, but performs
basically the same function.
Now that we have the generic MachineState, fold sPAPREnvironment into
sPAPRMachineState, the pseries specific subclass of MachineState.
This is mostly a matter of search and replace, although a few places which
relied on the global spapr variable are changed to find the structure via
qdev_get_machine().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVeXakAAoJECgfDbjSjVRpyFAH/AwSJhBbQOxtqS66INnzoLRJ
MWD3cP8tj0PzXsLx0cuPxdTboHH60alhSp+iLGv4NgNw15okY71bY2eLhewxS66W
a0wzVCaqeeD5GAoQaSOlqNLrhBodsKS62BWD9y0kK9rtMJfCW2C1JP8Mpue1XMuE
UC72tF4Q6wVdBD/kTD9DZW/23roFu0SuieFSjbQNNi1lInXtDv79UGX0xUHaXlal
+qCtRIy/wNZF0z5arNV/Skq7LKqYl7KZtTapZByy+q6vu0L8mOeXgJ9DLh666htB
NQJJ+VhsgBKPHmZqf8h4mPlvyp03rkr5dIGk7iB2o44GPaEJ/RjZ4wULjxWD12s=
=UY/0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio
Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu Jun 11 12:53:08 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (42 commits)
i386/acpi-build: fix PXB workarounds for unsupported BIOSes
i386/acpi-build: more traditional _UID and _HID for PXB root buses
vhost-scsi: move qdev properties into vhost-scsi.c
virtio-9p-device: move qdev properties into virtio-9p-device.c
virtio-serial-bus: move qdev properties into virtio-serial-bus.c
virtio-rng: move qdev properties into virtio-rng.c
virtio-scsi: move qdev properties into virtio-scsi.c
virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIES
virtio-net: move qdev properties into virtio-net.c
virtio-input: emulated devices [pci]
virtio-input: core code & base class [pci]
pci: add PCI_CLASS_INPUT_*
virtio-pci: fill VirtIOPCIRegions early.
virtio-pci: drop identical virtio_pci_cap
virtio-pci: move cap type to VirtIOPCIRegion
virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_map
virtio-pci: add virtio_pci_modern_region_map()
virtio-pci: add virtio_pci_modern_regions_init()
virtio-pci: add struct VirtIOPCIRegion for virtio-1 regions
virtio-balloon: switch to virtio_add_feature
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As only one place in virtio-serial-bus.c uses
DEFINE_VIRTIO_SERIAL_PROPERTIES, there is no need to expose it. Inline
it into virtio-serial-bus.c to avoid wrongly use.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disabling CONFIG_PARALLEL cause removing parallel_hds_isa_init defined in
parallel.c. This function is called during initialization of some boards so
disabling CONFIG_PARALLEL cause build failure.
This patch moves parallel_hds_isa_init to hw/isa/isa-bus.c so it is included
in case of disabled CONFIG_PARALLEL. Build is successful but qemu will abort
with "Unknown device" error when function is called.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <1431509970-32154-1-git-send-email-mrezanin@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make features 64bit wide everywhere.
On migration a full 64bit guest_features field is sent if one of the
high bits is set, in addition to the lower 32bit guest_features field
which must stay for compatibility reasons. That way we send the lower
32 feature bits twice, but the code is simpler because we don't have
to split and compose the 64bit features into two 32bit fields.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_PCI_QUEUE_MAX is not only used for pci, so rename it be generic.
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the virtio serial is writable, notify the chardev backend
with qemu_chr_accept_input().
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Put the number of serial ports into a local variable in
multi_serial_pci_realize, then increment the port count
(pci->ports) as we initialize the serial port cores.
Now pci->ports always holds the number of successfully
initialized ports and we can use multi_serial_pci_exit
to properly cleanup the already initialized bits in case
of a init failure.
https://bugzilla.redhat.com/show_bug.cgi?id=970551
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Create a new header for Cadence UART to allow using the device with
modern SoC programming conventions. The state struct needs to be
visible to embed the device in SoC containers.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 46a0fbd45b6b205f54c4a8c778deb75c77f8abdf.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up some variable names in preparation for migrating the state struct
and type cast macro to a public header. The acronym "UART" on it's own is
not specific enough to be used in a more global namespace so preface with
"cadence". Fix the capitalisation of "uart" in the state type while touching
the typename. Preface macros used by the state struct itself with CADENCE_UART
so they don't conflict in namespace either.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 3812b7426c338beae9e082557f3524a99310ddc6.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sort the sclp consoles into the input category, just as virtio-serial.
Various other sclp devices don't have an obvious category, sort them
into misc.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
There are a number of ffs(3) callers that do roughly:
bit = ffs(val);
if (bit) {
do_something(bit - 1);
}
This pattern can be converted to ctz32() like this:
zeroes = ctz32(val);
if (zeroes != 32) {
do_something(zeroes);
}
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-6-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models aren't supposed to go on fishing expeditions for
backends. They should expose suitable properties for the user to set.
For onboard devices, board code sets them.
A number of sysbus devices pick up block backends in their init() /
instance_init() methods with drive_get_next() instead: sl-nand,
milkymist-memcard, pl181, generic-sdhci.
Likewise, a number of sysbus devices pick up character backends in
their init() / realize() methods with qemu_char_get_next_serial():
cadence_uart, digic-uart, etraxfs,serial, lm32-juart, lm32-uart,
milkymist-uart, pl011, stm32f2xx-usart, xlnx.xps-uartlite.
All these mistakes are already marked FIXME. See the commit that
added these FIXMEs for a more detailed explanation of what's wrong.
Fortunately, only machines ppce500 and pseries-* support -device with
sysbus devices, and none of the devices above is supported with these
machines.
Set cannot_instantiate_with_device_add_yet to preserve our luck.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Character devices defined with -serial and -parallel are for board
initialization to wire up. Board code examines serial_hds[] and
parallel_hds[] to find them, and creates devices with their qdev
chardev properties set accordingly.
Except a few devices go on a fishing expedition for a suitable backend
instead of exposing a chardev property for board code to set: they use
serial_hds[] (often via qemu_char_get_next_serial()) or parallel_hds[]
in their realize() or init() method to connect to a backend.
Picking up backends that way works when the devices are created by
board code. But it's inappropriate for -device or device_add. Not
only is it inconsistent with how the other characrer device models
work (they connect to a backend explicitly identified by a "chardev"
property), it breaks when the backend has been picked up by the board
or a previous -device / device_add already.
Example:
$ qemu-system-ppc64 -M bamboo -S -device i82378 -device pc87312 -device pc87312
qemu-system-ppc64: -device pc87312: Property 'isa-parallel.chardev' can't take value 'parallel0', it's in use
Mark them with suitable FIXME comments.
Cc: Li Guang <lig.fnst@cn.fujitsu.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: "Andreas Färber" <andreas.faerber@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
commit 9b70c1790a
virtio-serial: switch to standard-headers
changes virtio_console_config size from 8 to 12 bytes:
it adds an optional 4 byte emerg_wr field.
As this crosses a power of two boundary, this changes the PCI BAR size,
which breaks migration compatibility with old qemu machine types.
It's probably a problem for other transports as well.
As a temporary fix, as we don't yet support this new field anyway,
simply make the config size smaller at init time.
Long terms we probably want something along the lines
of virtio_net_set_config_size.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
Users of virtio-serial may want to know when a port becomes writable. A
port can stop accepting writes if the guest port is open but not being
read from. In this case, data gets queued up in the virtqueue, and
after the vq is full, writes to the port do not succeed.
When the guest reads off a vq element, and adds a new one for the host
to put data in, we can tell users the port is available for more writes,
via the new ->guest_writable() callback.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Use DeviceClass::realize() and TypeInfo::instance_init() instead of
the deprecated SysBusDevice::init().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* fix a bug in bitops.h
* implement SD card support on integratorcp
* add a missing 'compatible' property for Cortex-A57
* add Netduino 2 machine model
* fix command line parsing bug for CPU options with multiple CPUs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HTma
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150311' into staging
target-arm queue:
* fix a bug in bitops.h
* implement SD card support on integratorcp
* add a missing 'compatible' property for Cortex-A57
* add Netduino 2 machine model
* fix command line parsing bug for CPU options with multiple CPUs
# gpg: Signature made Wed Mar 11 14:14:22 2015 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150311:
bitops.h: sextract64() return type should be int64_t, not uint64_t
integrator/cp: Implement CARDIN and WPROT signals
integrator/cp: Model CP control registers as sysbus device
target-arm: Add missing compatible property to A57
netduino2: Add the Netduino 2 Machine
stm32f205: Add the stm32f205 SoC
stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFG
stm32f2xx_USART: Add the stm32f2xx USART Controller
stm32f2xx_timer: Add the stm32f2xx Timer
hw/arm/virt: fix cmdline parsing bug with CPU options and smp > 1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f2xx USART controller
(UART also uses the same controller).
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 762c6c0d2a41d574932bc4445ec9bfffe6da8798.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit d0a0bfe672 added checks for port
names, but didn't add a check to ensure port->name is non-NULL. This
results in a SIGSEGV when adding a port when one of the previously-added
ports didn't have the 'name' property set.
https://bugzilla.redhat.com/show_bug.cgi?id=1192775
Reported-by: vivian zhang <vivianzhang@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Bonus fix: always set an error on failure. Some failures were silent
before, except for the generic error set by device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
=LY/j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
Add a helper function for checking whether a bit is set in the guest
features for a vdev as well as one that works on a feature bit set.
Convert code that open-coded this: It cleans up the code and makes it
easier to extend the guest feature bits.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add virtio_{add,clear}_feature helper functions for manipulating a
feature bits variable. This has some benefits over open coding:
- add check that the bit is in a sane range
- make it obvious at a glance what is going on
- have a central point to change when we want to extend feature bits
Convert existing code manipulating features to use the new helpers.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
It shouldn't fail, and no caller checks for failure. Make failure
fatal.
Maintainers of affected machines cc'ed.
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Maintainers of affected machines cc'ed.
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It shouldn't fail, and no caller checks for failure. Make failure
fatal.
Maintainers of affected machines cc'ed.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It's the same old loop copied five times, plus another instance where
it's clipped to two iterations and unrolled.
No external users of serial_isa_init() are left, so give it internal
linkage.
Maintainers of affected machines cc'ed.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Warning from the Sparse static analysis tool:
hw/char/virtio-serial-bus.c:31:3:
warning: symbol 'vserdevices' was not declared. Should it be static?
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Warnings from the Sparse static analysis tool:
hw/char/serial.c:630:26: warning: symbol
'vmstate_serial_thr_ipending' was not declared. Should it be static?
hw/char/serial.c:646:26: warning: symbol
'vmstate_serial_tsr' was not declared. Should it be static?
hw/char/serial.c:665:26: warning: symbol
'vmstate_serial_recv_fifo' was not declared. Should it be static?
hw/char/serial.c:681:26: warning: symbol
'vmstate_serial_xmit_fifo' was not declared. Should it be static?
hw/char/serial.c:697:26: warning: symbol
'vmstate_serial_fifo_timeout_timer' was not declared. Should it be static?
hw/char/serial.c:713:26: warning: symbol
'vmstate_serial_timeout_ipending' was not declared. Should it be static?
hw/char/serial.c:729:26: warning: symbol
'vmstate_serial_poll' was not declared. Should it be static?
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Gibson.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hnwv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit/tags/for-2.3' into staging
Migration fix for virtio-serial devices on bi-endian targets by David
Gibson.
# gpg: Signature made Mon 05 Jan 2015 07:26:07 GMT using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit/tags/for-2.3:
virtio-serial: Don't keep a persistent copy of config space
virtio_serial: Don't use vser->config.max_nr_ports internally
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'config' field in the VirtIOSerial structure keeps a copy of the virtio
console's config space as visible to the guest, that is to say, in guest
endianness. This is fiddly to maintain, because on some targets, such as
powerpc, the "guest endianness" can change when a new guest OS boots.
In fact, there's no need to maintain such a guest view of config space -
instead we can reconstruct it from host-format data when it is accessed
with get_config.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
A number of places in the virtio_serial driver retrieve the number of ports
from vser->config.max_nr_ports, which is guest-endian. But for internal
users, we already have a host-endian copy of the number of ports in
vser->serial.max_virtserial_ports. Using that instead of the config field
removes the need for easy-to-forget byteswapping.
In particular this fixes a bug on incoming migration, where we don't adjust
the endianness vser->config correctly, because it hasn't yet been loaded
from the migration stream when virtio_serial_load_device() is called.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
If the THR interrupt is disabled, there is no need to migrate thr_ipending
because LSR.THRE will be sampled again when the interrupt is enabled.
(This is the behavior that is not documented in the datasheet, but
relied on by Windows!)
Note that in this case IIR will never be 0x2 so, if thr_ipending were
to be one, QEMU would produce the subsection.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is disagreement on whether LSR.THRE should be resampled when
IER.THRI goes from 1 to 1. Bochs only does it if IER.THRI goes from 0
to 1; PCE does it even if IER.THRI is unchanged. But the Windows driver
seems to always go from 1 to 0 and back to 1, so do things in agreement
with Bochs, because the handling of thr_ipending was reported in 2010
(https://lists.gnu.org/archive/html/qemu-devel/2010-03/msg01914.html)
as breaking DR-DOS Plus.
Reported-by: Roy Tam <roytam@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the transmit FIFO is emptied or enabled, the transmitter
hold register is empty. When it is disabled, it is also emptied and
in addition the previous contents of the transmitter hold register
are discarded. In either case, the THRE bit in LSR must be set and
THRI raised.
When the receive FIFO is emptied or enabled, the data ready and break
bits must be cleared in LSR. Likewise when the receive FIFO is disabled.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- assert TEMT is cleared before sending a character; we'll get one from
TSR if tsr_retry > 0, from the FIFO or THR otherwise
- assert THRE cleared and FIFO not empty (if enabled) before fetching a
character to send. This effectively reverts dffacd46, but the check
makes no sense and commit f702e62 (serial: change retry logic to avoid
concurrency, 2014-07-11) must have made it unnecessary. The commit
message for f702e62 talks about multiple calls to qemu_chr_fe_add_watch
triggering s->tsr_retry >= MAX_XMIT_RETRY, but other failures were
possible. For example, if you have multiple calls, the subsequent ones
will see s->tsr_retry == 0 and will find THRE and/or TEMT on entry.
- for clarity, raise THRI immediately after the code sets THRE
- check THRE to see if another character has to be sent. This makes
the assertions more obvious and also means TEMT has to be set as soon as
the loop ends. It makes the loop send both TSR and THR if flow-control
happens in non-FIFO mode. Previously, THR would be lost.
- clear TEMT together with THRE even in the non-FIFO case
The last two items are bugfixes, but they were just found by inspection
and do not squash known bugs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is responsible for failure of migration from 2.2 to 2.1, because
thr_ipending is always one in practice.
serial.c is setting thr_ipending unconditionally. However, thr_ipending
is not used at all if THRI=0, and it will be overwritten again the next
time THRE or THRI changes. For that reason, we can set thr_ipending to
zero every time THRI is reset.
There is disagreement on whether LSR.THRE should be resampled when IER.THRI
goes from 1 to 1. This patch does not touch the code, leaving that for
QEMU 2.3+.
This has no semantic change and is enough to fix migration in the common
case where the interrupt is not pending or is reported in IIR. It does not
change the migration format, so 2.2.0 -> 2.1 will remain broken but we
can fix 2.2.1 -> 2.1 without breaking 2.2.1 <-> 2.2.0.
The case that remains broken (the one in which the subsection is strictly
necessary) is when THRE=1, the THRI interrupt has *not* been acknowledged
yet, and a higher-priority interrupt comes. In this case, you need the
subsection to tell the source that the lower-priority THRI interrupt is
pending. The subsection's breakage of migration, in this case, prevents
continuing the VM on the destination with an invalid state.
Cc: qemu-stable@nongnu.org
Reported-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- instruction decoding and sparse warning in kvm
- overlong input and hangs in the sclp consoles
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=hUn1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20141105' into staging
Several bugfixes for s390x:
- instruction decoding and sparse warning in kvm
- overlong input and hangs in the sclp consoles
# gpg: Signature made Wed 05 Nov 2014 15:42:14 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20141105:
s390x/sclpconsole: Avoid hanging SCLP ASCII console
s390x/sclpconsole-lm: Fix hanging SCLP line mode console
s390x/sclpconsole-lm: truncate input if line is too long
s390x/kvm: Fix warning from sparse
s390x/kvm: Fix opcode decoding for eb instruction handler
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It seems "name" is not mandatory, and the following command line (based
on one generated by current libvirt) will crash qemu at start:
qemu-system-x86_64 \
-device virtio-serial-pci \
-device virtserialport,name=foo \
-device virtconsole
Program received signal SIGSEGV, Segmentation fault.
__strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:210
210 movlpd (%rsi), %xmm2
Missing separate debuginfos, use: debuginfo-install
python-libs-2.7.5-13.fc20.x86_64
(gdb) bt
#0 __strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:210
#1 0x000055555566bdc6 in find_port_by_name (name=0x0) at /home/elmarco/src/qemu/hw/char/virtio-serial-bus.c:67
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Force recalculation of file descriptor sets for main loop's poll(),
in order to be able to readd a possibly removed input file descriptor
after can_read() returned 0 (zero).
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Trigger recalculating sets of file descriptors for the main loop's poll()
in order to make sure a possibly removed FD 0 from the poll() file
descriptor array is re-added. FD 0 is removed from the decriptor array
when the console's can_read() callback returns 0.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
As the SCLP line mode console input length is limited by the available
SCCB buffer space, it might lock up if the input does not fit into the
buffer.
With this patch, characters that don't fit are 'eaten' up to the next
CR/LF and the input line is sent truncated to the guest.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Right now, s->poll_msl may linger at "0" value for an arbitrarily long
time, until serial_update_msl is called for the first time. This is
unnecessary, and will lead to the s->poll_msl field being unnecessarily
migrated.
We can call serial_update_msl immediately at realize time (via
serial_reset) and be done with it. The memory-mapped UART was already
doing that, but not the ISA and PCI variants.
Regarding the delta bits, be consistent with what serial_reset does when
the serial port is not backed by a physical serial port, and always clear
them at reset time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
