Bit SCU500[2] of the AST2600 controls the boot device of the SoC.
Future changes will configure this bit to boot from eMMC disk images
specially built for this purpose.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
loongarch added a common library for edk2 to
parse flash base addresses through fdt.
For compatibility with other architectures,
the flash block size in qemu is now changed to 256k.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240624033319.999631-1-lixianglai@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Remove extioi INT_encode encode mode, because we don't emulate it.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240718083254.748179-1-gaosong@loongson.cn>
Some commands need rework for nesting, as they used to assume S1
and S2 are mutually exclusive:
- CMD_TLBI_NH_ASID: Consider VMID if stage-2 is supported
- CMD_TLBI_NH_ALL: Consider VMID if stage-2 is supported, otherwise
invalidate everything, this required a new vmid invalidation
function for stage-1 only (ASID >= 0)
Also, rework trace events to reflect the new implementation.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-15-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, Instead of doing TLB invalidation by ASID only, VMID will be
also required.
Add smmu_iotlb_inv_asid_vmid() which invalidates by both ASID and VMID.
However, at the moment this function is only used in SMMU_CMD_TLBI_NH_ASID
which is a stage-1 command, so passing VMID = -1 keeps the original
behaviour.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-14-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With nesting, we would need to invalidate IPAs without
over-invalidating stage-1 IOVAs. This can be done by
distinguishing IPAs in the TLBs by having ASID=-1.
To achieve that, rework the invalidation for IPAs to have a
separate function, while for IOVA invalidation ASID=-1 means
invalidate for all ASIDs.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-13-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When nested translation is requested, do the following:
- Translate stage-1 table address IPA into PA through stage-2.
- Translate stage-1 table walk output (IPA) through stage-2.
- Create a single TLB entry from stage-1 and stage-2 translations
using logic introduced before.
smmu_ptw() has a new argument SMMUState which include the TLB as
stage-1 table address can be cached in there.
Also in smmu_ptw(), a separate path used for nesting to simplify the
code, although some logic can be combined.
With nested translation class of translation fault can be different,
from the class of the translation, as faults from translating stage-1
tables are considered as CLASS_TT and not CLASS_IN, a new member
"is_ipa_descriptor" added to "SMMUPTWEventInfo" to differ faults
from walking stage 1 translation table and faults from translating
an IPA for a transaction.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-12-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for nested (combined) TLB entries.
The main function combine_tlb() is not used here but in the next
patches, but to simplify the patches it is introduced first.
Main changes:
1) New field added in the SMMUTLBEntry struct: parent_perm, for
nested TLB, holds the stage-2 permission, this can be used to know
the origin of a permission fault from a cached entry as caching
the “and” of the permissions loses this information.
SMMUPTWEventInfo is used to hold information about PTW faults so
the event can be populated, the value of stage used to be set
based on the current stage for TLB permission faults, however
with the parent_perm, it is now set based on which perm has
the missing permission
When nesting is not enabled it has the same value as perm which
doesn't change the logic.
2) As combined TLB implementation is used, the combination logic
chooses:
- tg and level from the entry which has the smallest addr_mask.
- Based on that the iova that would be cached is recalculated.
- Translated_addr is chosen from stage-2.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-11-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, smmuv3_do_translate() will be used to translate the CD and the
TTBx, instead of re-writting the same logic to convert the returned
cached entry to an address, add a new macro CACHED_ENTRY_TO_ADDR.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-8-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ASID and VMID used to be uint16_t in the translation config, however,
in other contexts they can be int as -1 in case of TLB invalidation,
to represent all (don’t care).
When stage-2 was added asid was set to -1 in stage-2 and vmid to -1
in stage-1 configs. However, that meant they were set as (65536),
this was not an issue as nesting was not supported and no
commands/lookup uses both.
With nesting, it’s critical to get this right as translation must be
tagged correctly with ASID/VMID, and with ASID=-1 meaning stage-2.
Represent ASID/VMID everywhere as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-7-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
smmuv3_translate() does everything from STE/CD parsing to TLB lookup
and PTW.
Soon, when nesting is supported, stage-1 data (tt, CD) needs to be
translated using stage-2.
Split smmuv3_translate() to 3 functions:
- smmu_translate(): in smmu-common.c, which does the TLB lookup, PTW,
TLB insertion, all the functions are already there, this just puts
them together.
This also simplifies the code as it consolidates event generation
in case of TLB lookup permission failure or in TT selection.
- smmuv3_do_translate(): in smmuv3.c, Calls smmu_translate() and does
the event population in case of errors.
- smmuv3_translate(), now calls smmuv3_do_translate() for
translation while the rest is the same.
Also, add stage in trace_smmuv3_translate_success()
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-6-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, translation stage is represented as an int, where 1 is stage-1 and
2 is stage-2, when nested is added, 3 would be confusing to represent nesting,
so we use an enum instead.
While keeping the same values, this is useful for:
- Doing tricks with bit masks, where BIT(0) is stage-1 and BIT(1) is
stage-2 and both is nested.
- Tracing, as stage is printed as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20240715084519.1189624-5-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
=cZhV
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/tcg: fixes for seg_helper.c
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
# TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
# XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
# y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
# Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
# JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
# =cZhV
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 02:34:05 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386/tcg: save current task state before loading new one
target/i386/tcg: use X86Access for TSS access
target/i386/tcg: check for correct busy state before switching to a new task
target/i386/tcg: Compute MMU index once
target/i386/tcg: Introduce x86_mmu_index_{kernel_,}pl
target/i386/tcg: Reorg push/pop within seg_helper.c
target/i386/tcg: use PUSHL/PUSHW for error code
target/i386/tcg: Allow IRET from user mode to user mode with SMAP
target/i386/tcg: Remove SEG_ADDL
target/i386/tcg: fix POP to memory in long mode
hpet: fix HPET_TN_SETVAL for high 32-bits of the comparator
hpet: fix clamping of period
docs: Update description of 'user=username' for '-run-with'
qemu/timer: Add host ticks function for LoongArch
scsi: fix regression and honor bootindex again for legacy drives
hw/scsi/lsi53c895a: bump instruction limit in scripts processing to fix regression
disas: Fix build against Capstone v6
cpu: Free queued CPU work
Revert "qemu-char: do not operate on sources from finalize callbacks"
i386/sev: Don't allow automatic fallback to legacy KVM_SEV*_INIT
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Addition of eMMC support is a long-term collaborative virtual work by:
- Cédric Le Goater
- Edgar E. Iglesias
- Francisco Iglesias
- Joel Stanley
- Luc Michel
- Philippe Mathieu-Daudé
- Sai Pavan Boddu
- Vincent Palatin
-----BEGIN PGP SIGNATURE-----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=m52p
-----END PGP SIGNATURE-----
Merge tag 'sdmmc-20240716' of https://github.com/philmd/qemu into staging
SD/MMC patches queue
Addition of eMMC support is a long-term collaborative virtual work by:
- Cédric Le Goater
- Edgar E. Iglesias
- Francisco Iglesias
- Joel Stanley
- Luc Michel
- Philippe Mathieu-Daudé
- Sai Pavan Boddu
- Vincent Palatin
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaWvlEACgkQ4+MsLN6t
# wN7p7hAAj6JV3fIg1iKBR49asQVzU3/nYRIlWnp6QsLRGX+qwjMnuMzlvpinTtq4
# SJZobw1OJp/2LNaEGqAqNHqBpwAPibUnkei0pd1Y+v6Cyywo7X5Y1hRvQf46Ezqm
# u2FxsAfWc4cQs+sFrbNq/v7X2+R6VmChkA+EVc4cB0gwMOjvtg8RQObdhKr7Y6UX
# b9KvRDSNMH75ht39RD/smtcn/kprkkTQYo/ciBbVWdnBMiKuhN0qLXbKnZu9lMs4
# Ru29ypT+98pL1E/4YbgNcLGYXHjKrSIpD3+DEvmWe09LdG2+YMASv7do3iKfAYN5
# KdQ9BNZxYrpmeDAiyL521pODsgvU/wDDdbK0xUztPqcHhpYkvcfYWdzO8wr28Ib0
# wOEA0+xzveeD+1ZKjilbZ6tKzsRrKgv1O8j1T8rXab2/3mjrW2R5G/5y4bpM8E4h
# KuqGwC2YjWsJi3CwRL5Cvu5YBsiyYF7mk0zTKK2qwO87B7Pa0PJ3Y9x0xIWm4blp
# RoZ1SaCChH3M1hKK3jDjrIutXrZG8CzHpe17QjTQeUxo+/wX3VfDYbXasTe1orFu
# +JkUBU+xZ6m1+dWAa22H5KbeY8wd99p6w+ChnVmS15WqVK8i2e4gfTsKGh7Idt3t
# Vf4CaCD/2vRtKo4AN+YNDUg1DWV89zXRbnkR5oWUWG3Fda5Qo3k=
# =m52p
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 04:39:13 AM AEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'sdmmc-20240716' of https://github.com/philmd/qemu:
hw/sd/sdcard: Support boot area in emmc image
hw/sd/sdcard: Add mmc SWITCH function support (CMD6)
hw/sd/sdcard: Add eMMC 'boot-partition-size' property
hw/sd/sdcard: Add emmc_cmd_SEND_EXT_CSD handler (CMD8)
hw/sd/sdcard: Implement eMMC sleep state (CMD5)
hw/sd/sdcard: Add emmc_cmd_PROGRAM_CID handler (CMD26)
hw/sd/sdcard: Fix SET_BLOCK_COUNT command argument on eMMC (CMD23)
hw/sd/sdcard: Add emmc_cmd_SET_RELATIVE_ADDR handler (CMD3)
hw/sd/sdcard: Register unimplemented command handlers
hw/sd/sdcard: Register generic command handlers
hw/sd/sdcard: Basis for eMMC support
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since eMMC are soldered on boards, it is not user-creatable.
RCA register is initialized to 0x0001, per spec v4.3,
chapter 8.5 "RCA register":
The default value of the RCA register is 0x0001.
The value 0x0000 is reserved to set all cards into
the Stand-by State with CMD7.
The CSD register is very similar to SD one, except
the version announced is v4.3.
eMMC CID register is slightly different from SD:
- One extra PNM (5 -> 6)
- MDT is only 1 byte (2 -> 1).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-2-philmd@linaro.org>
Remove dpy_cursor_define_supported() as it brings no benefit today and
it has a few inherent problems.
All graphical displays except egl-headless support cursor composition
without DMA-BUF, and egl-headless is meant to be used in conjunction
with another graphical display, so dpy_cursor_define_supported()
always returns true and meaningless.
Even if we add a new display without cursor composition in the future,
dpy_cursor_define_supported() will be problematic as a cursor display
fix for it because some display devices like virtio-gpu cannot tell the
lack of cursor composition capability to the guest and are unable to
utilize the value the function returns. Therefore, all non-headless
graphical displays must actually implement cursor composition for
correct cursor display.
Another problem with dpy_cursor_define_supported() is that it returns
true even if only some of the display listeners support cursor
composition, which is wrong unless all display listeners that lack
cursor composition is headless.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240715-cursor-v3-4-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This factors the CPU pause function from pause_all_vcpus() into a
new cpu_pause() function, similarly to cpu_resume(). cpu_resume()
is moved to keep it next to cpu_pause().
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20240712120247.477133-17-npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
load_image_gzipped() does not seem to be used anywhere. Remove it.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240711072448.32673-1-anisinha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The doc comments for the functions for named GPIO inputs and
outputs had a couple of problems:
* some copy-and-paste errors meant the qdev_connect_gpio_out_named()
doc comment had references to input GPIOs that should be to
output GPIOs
* it wasn't very clear that named GPIOs are arrays and so the
connect functions specify a single GPIO line by giving both
the name of the array and the index within that array
Fix the copy-and-paste errors and slightly expand the text
to say that functions are connecting one line in a named GPIO
array, not a single named GPIO line.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240708153312.3109380-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Capstone v6 made major changes, such as renaming for AArch64, which
broke programs using the old headers, like QEMU. However, Capstone v6
provides the CAPSTONE_AARCH64_COMPAT_HEADER compatibility definition
allowing to build against v6 with the old definitions, so fix the QEMU
build using it.
We can lift that definition and switch to the new naming once our
supported distros have Capstone v6 in place.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240715213943.1210355-1-gustavo.romero@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Running qemu-system-aarch64 -M virt -nographic and terminating it will
result in a LeakSanitizer error due to remaining queued CPU work so
free it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Link: https://lore.kernel.org/r/20240714-cpu-v1-1-19c2f8de2055@daynix.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmaQHpQACgkQTeGvMW1P
DemukQf+Pqcq75cflBqIyVN84/0eThJxmpoTP0ynGNMKJp+K+oecb5pdgTeDI3Kh
esDOjL8m849r5LFjrjmySrTX8znHPFXdBdqCaOp/MZlgz3NML1guB5EYsizZJ+L6
K4IRLE/8gzfZHY4yWGmUBuL1VBs8XZV0bXYYlA0xKlO638O0KgVQ/2YpC/44l93J
rEnefSeXIi+/tCYEaX7t2dA+Qfm/qUrcEZBgvhCREi8t8hTzKGHsl2LVKrsFdA5I
QZtTFcqeoJThtzWmxGKqbfFb/qeirBlCfhvTEmUWXlS1z9VNzy0ZuqA2l0Sy05ls
eARbl+JnvV6ic6PikZd8dMSrILjNkQ==
=dLKH
-----END PGP SIGNATURE-----
Merge tag 'nvme-next-pull-request' of https://gitlab.com/birkelund/qemu into staging
hw/nvme patches
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmaQHpQACgkQTeGvMW1P
# DemukQf+Pqcq75cflBqIyVN84/0eThJxmpoTP0ynGNMKJp+K+oecb5pdgTeDI3Kh
# esDOjL8m849r5LFjrjmySrTX8znHPFXdBdqCaOp/MZlgz3NML1guB5EYsizZJ+L6
# K4IRLE/8gzfZHY4yWGmUBuL1VBs8XZV0bXYYlA0xKlO638O0KgVQ/2YpC/44l93J
# rEnefSeXIi+/tCYEaX7t2dA+Qfm/qUrcEZBgvhCREi8t8hTzKGHsl2LVKrsFdA5I
# QZtTFcqeoJThtzWmxGKqbfFb/qeirBlCfhvTEmUWXlS1z9VNzy0ZuqA2l0Sy05ls
# eARbl+JnvV6ic6PikZd8dMSrILjNkQ==
# =dLKH
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jul 2024 11:04:04 AM PDT
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* tag 'nvme-next-pull-request' of https://gitlab.com/birkelund/qemu:
hw/nvme: Expand VI/VQ resource to uint32
hw/nvme: Allocate sec-ctrl-list as a dynamic array
hw/nvme: separate identify data for sec. ctrl list
hw/nvme: add Identify Endurance Group List
hw/nvme: fix BAR size mismatch of SR-IOV VF
hw/nvme: fix number of PIDs for FDP RUH update
hw/nvme: Add support for setting the MQES for the NVMe emulation
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 73064edfb8 ("hw/nvme: flexible data placement emulation")
intorudced NVMe FDP feature to nvme-subsys and nvme-ctrl with a
single endurance group #1 supported. This means that controller should
return proper identify data to host with Identify Endurance Group List
(CNS 19h). But, yes, only just for the endurance group #1. This patch
allows host applications to ask for which endurance group is available
and utilize FDP through that endurance group.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Up until now, the EXTI implementation had 16 inbound GPIOs connected to
the 16 outbound GPIOs of STM32L4x5 SYSCFG.
The EXTI actually handles 40 lines (namely 5 from STM32L4x5 USART
devices which are already implemented in QEMU).
In order to connect USART devices to EXTI, this commit consolidates
constants `EXTI_NUM_INTERRUPT_OUT_LINES` (40) and
`EXTI_NUM_GPIO_EVENT_IN_LINES` (16) into `EXTI_NUM_LINES` (40).
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240707085927.122867-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that all targets set TCGCPUOps::cpu_exec_halt, we can make it
mandatory and remove the fallback handling that calls cpu_has_work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* support AST2700 network
-----BEGIN PGP SIGNATURE-----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=UygB
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240709' of https://github.com/legoater/qemu into staging
aspeed queue:
* support AST2700 network
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaNJCcACgkQUaNDx8/7
# 7KF7pw//So48XdPJhdQukO/PDLGSYL8rRjDfZbQFLLw10MozcZZ/Nz/BCzrNxJRg
# rHP/shyO3XL1YZ6U1LNXk6E845giVriSpRRjGX9CuK4fypM9xom6qAIOtOLeH7hG
# iTMW++IxN/JgVmVOKYn3C+2+odiq6NzZxFrblVtGPUDtNkkC9BaYGHnccMsl5zQh
# LOSPJxqLiiuDjZPqdwa4fMbtEeNTU3A0WLlWxX7yPfJt2T20a4wE6bdWVGcI6fiV
# QbCmLLrMXhuZFx+uT4B2hbHi+hGS5H+F3QBOefum6z+i9NEbfAZSyusd8/qTEify
# fSBqxL4LD6K4WKL1Hg9959cBcm5zWgPXk7znus4E/TZuUTdSHaPC7clESIcYqWPS
# veEAppmHneO4cdmK1m+Gv4gpWD/adS4ZfV7O+C3z149ms0gL4JrK6QndPdE5QuIW
# u47PhIT3oIM0WznnMusoCndFxs6Gl/GBkzdxW0gdoJKBRfymbsroWeZamAWTznbV
# mL8Td8bEP/NcV40cm1PtpZyl7j0MzxcKDUHKv9ioQTXLUpkl5LSsIGmd1m78WRlE
# J6bUJ3jqQT6/s5i3TVqTGe7xuqMkg+9Er8rn5nAWgSronsf4nprAfOU8Lj+b06BM
# YRroGgU2lAQrv17liQExrG3Tj1SH+oEp1q0qEq7qo824HlGjBkI=
# =UygB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 09 Jul 2024 04:51:03 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240709' of https://github.com/legoater/qemu:
machine_aspeed.py: update to test network for AST2700
machine_aspeed.py: update to test ASPEED OpenBMC SDK v09.02 for AST2700
hw/block: m25p80: support quad mode for w25q01jvq
aspeed/soc: set dma64 property for AST2700 ftgmac100
hw/net:ftgmac100: update TX and RX packet buffers address to 64 bits
hw/net:ftgmac100: introduce TX and RX ring base address high registers to support 64 bits
hw/net:ftgmac100: update ring base address to 64 bits
hw/net:ftgmac100: update memory region size to 64KB
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Everything is now in place to use the Host IOMMU Device callbacks
to retrieve the page size mask usable with a given assigned device.
This new method brings the advantage to pass the info much earlier
to the virtual IOMMU and before the IOMMU MR gets enabled. So let's
remove the call to memory_region_iommu_set_page_size_mask in
vfio common.c and remove the single implementation of the IOMMU MR
callback in the virtio-iommu.c
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This callback will be used to retrieve the page size mask supported
along a given Host IOMMU device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The error handle argument is not used anywhere. let's remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vfio_container_get_iova_ranges() to retrieve the usable
IOVA regions of the base container and use it in the Host IOMMU
device implementations of get_iova_ranges() callback.
We also fix a UAF bug as the list was shallow copied while
g_list_free_full() was used both on the single call site, in
virtio_iommu_set_iommu_device() but also in
vfio_container_instance_finalize(). Instead use g_list_copy_deep.
Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
It have "Normal Priority Transmit Ring Base Address Register High(0x17C)",
"High Priority Transmit Ring Base Address Register High(0x184)" and
"Receive Ring Base Address Register High(0x18C)" to save the high part physical
address of descriptor manager.
Ex: TX descriptor manager address [34:0]
The "Normal Priority Transmit Ring Base Address Register High(0x17C)"
bits [2:0] which corresponds the bits [34:32] of the 64 bits address of
the TX ring buffer address.
The "Normal Priority Transmit Ring Base Address Register(0x20)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the TX ring buffer address.
Introduce a new sub region which size is 0x100 for the set of new registers
and map it at 0x100 in the container region.
This sub region range is from 0x100 to 0x1ff.
Introduce a new property and object attribute to activate the region for new registers.
Introduce a new memop handlers for the new register read and write.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Update TX and RX ring base address data type to uint64_t for
64 bits dram address DMA support.
Both "Normal Priority Transmit Ring Base Address Register(0x20)" and
"Receive Ring Base Address Register (0x24)" are used for saving the
low part physical address of descriptor manager.
Therefore, changes to set TX and RX descriptor manager address bits [31:0]
in ftgmac100_read and ftgmac100_write functions.
Incrementing the version of vmstate to 2.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
one MAC controller owns 128KB of register space for AST2500.
However, one MAC controller only owns 64KB of register space for AST2600
and AST2700. It set the memory region size 128KB and it occupied another
controllers Address Spaces.
Update one MAC controller memory region size to 0x1000
because AST2500 did not use register spaces over than 64KB.
Introduce a new container region size to 0x1000 and its range
is from 0 to 0xfff. This container is mapped a sub region
for the current set of register.
This sub region range is from 0 to 0xff.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
In preparation of introducing eMMC support which have
different CSD/CID structures, introduce a pair of handlers
in SDCardClass.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-82-philmd@linaro.org>
All handlers using the 'sd_none' enum got converted,
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-76-philmd@linaro.org>
Allow passing the current CPU context to command handlers via user_ctx
when the handler requires it.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20240628050850.536447-9-gustavo.romero@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-38-alex.bennee@linaro.org>
Make gdb_hextomem non-internal so it's not confined to use only in
gdbstub.c.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240628050850.536447-8-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-37-alex.bennee@linaro.org>
Currently, it's not possible to have stubs specific to a given target,
even though there are GDB features which are target-specific, like, for
instance, memory tagging.
This commit introduces gdb_extend_qsupported_features,
gdb_extend_query_table, and gdb_extend_set_table functions as interfaces
to extend the qSupported string, the query handler table, and the set
handler table, allowing target-specific stub implementations.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240628050850.536447-4-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-33-alex.bennee@linaro.org>
Move GdbCmdParseEntry and its associated types into a separate header
file to allow the use of GdbCmdParseEntry and other gdbstub command
functions outside of gdbstub.c.
Since GdbCmdParseEntry and get_param are now public, kdoc
GdbCmdParseEntry and rename get_param to gdb_get_cmd_param.
This commit also makes gdb_put_packet public since is used in gdbstub
command handling.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240628050850.536447-3-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-32-alex.bennee@linaro.org>
cpu::plugin_state is allocated in cpu_common_initfn() when
the vCPU state is created. Release it in cpu_common_finalize()
when we are done.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240606124010.2460-3-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-29-alex.bennee@linaro.org>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
pcie_sriov doesn't have code to restore its state after migration, but
igb, which uses pcie_sriov, naively claimed its migration capability.
Add code to register VFs after migration and fix igb migration.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-9-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
num_vfs is not migrated so use PCI_SRIOV_CTRL_VFE and PCI_SRIOV_NUM_VF
instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-8-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable SR-IOV VF devices by reusing code to power down PCI devices
instead of removing them when the guest requests to disable VFs. This
allows to realize devices and report VF realization errors at PF
realization time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-6-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_new() aborts when creating a VF with a function number equals to or
is greater than PCI_DEVFN_MAX.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-5-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The renamed state will not only represent powering state of PFs, but
also represent SR-IOV VF enablement in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-1-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The unrealize functions of the various vhost-user devices are
calling the corresponding vhost_*_set_status() functions with a
status of 0 to shut down the device correctly.
Now these vhost_*_set_status() functions all follow this scheme:
bool should_start = virtio_device_should_start(vdev, status);
if (vhost_dev_is_started(&vvc->vhost_dev) == should_start) {
return;
}
if (should_start) {
/* ... do the initialization stuff ... */
} else {
/* ... do the cleanup stuff ... */
}
The problem here is virtio_device_should_start(vdev, 0) currently
always returns "true" since it internally only looks at vdev->started
instead of looking at the "status" parameter. Thus once the device
got started once, virtio_device_should_start() always returns true
and thus the vhost_*_set_status() functions return early, without
ever doing any clean-up when being called with status == 0. This
causes e.g. problems when trying to hot-plug and hot-unplug a vhost
user devices multiple times since the de-initialization step is
completely skipped during the unplug operation.
This bug has been introduced in commit 9f6bcfd99f ("hw/virtio: move
vm_running check to virtio_device_started") which replaced
should_start = status & VIRTIO_CONFIG_S_DRIVER_OK;
with
should_start = virtio_device_started(vdev, status);
which later got replaced by virtio_device_should_start(). This blocked
the possibility to set should_start to false in case the status flag
VIRTIO_CONFIG_S_DRIVER_OK was not set.
Fix it by adjusting the virtio_device_should_start() function to
only consider the status flag instead of vdev->started. Since this
function is only used in the various vhost_*_set_status() functions
for exactly the same purpose, it should be fine to fix it in this
central place there without any risk to change the behavior of other
code.
Fixes: 9f6bcfd99f ("hw/virtio: move vm_running check to virtio_device_started")
Buglink: https://issues.redhat.com/browse/RHEL-40708
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240618121958.88673-1-thuth@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
-----BEGIN PGP SIGNATURE-----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=LxwO
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu into staging
aspeed queue:
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaDs3QACgkQUaNDx8/7
# 7KEc/BAAj5AS3rLm3NPpU13y1P1hcjuSm1/PVGTJQH+m4K9UaAkJ8VhRB0Y/rdU6
# ygGhKaCHyk96+I49Csz886YU9Wg9qnxaYJAbornHZJVGNy5tuVpQKM20kfgN3XFN
# ENJR3e+J6Ye7kCtR1ujcf0mydWDaDyq0i82ykURsudcQLMnGq1gBQGadYjt1hJoN
# F9HDPgUJ8/wjQnG8BomsrnuvUSpRTbGNV66FNxXdQ6C6d6OTKQfNnXXqrKO+8QPK
# B5XB9FjTk017DUog1jdE1SaEMowml8CmUhjMwLHOcyWhcZpEk90aMX8cQhefUs9y
# O6kNin2UYEjcTHA/lyfMQJQMNDDZTE32MyP1LwRE/5ZiHqrT7ViqNvZSPBGBueUz
# 9B0xiQTuYqcRqlwgyU73DvnTgrsKFdKQSldj5dXYVnWCKeKY/sCWApHMJxN9xMCA
# Uw1E4QfCLkd+TM6DoJAkBHWFsgi44Aym11VU4VviGNRNTgmTptgQzmHiYGNFiGZG
# OypVPM8Ti6UeVnW65l9J9f7xA0jDB+XQjhCCaoax9GlUMA4C4/Aln5OXXxIWRWFd
# XA3Gn3c/S2j7rMqdfAk68xDHuAJ3wShHlw6HLRd1Xki05WFTeLj1lejLHMdfpNmr
# DkQimzHShBqZzZGxc7FsO0keGY8kyIJkZhbCCbZrFXJXQGRdBao=
# =LxwO
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 Jul 2024 12:59:48 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu:
hw/net:ftgmac100: fix coding style
aspeed/sdmc: Remove extra R_MAIN_STATUS case
aspeed/soc: Fix possible divide by zero
aspeed/sdmc: Check RAM size value at realize time
aspeed: Deprecate the tacoma-bmc machine
hw/gpio/aspeed: Add reg_table_count to AspeedGPIOClass
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
-----BEGIN PGP SIGNATURE-----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=fLCx
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240702' of https://github.com/philmd/qemu into staging
Misc HW patches queue
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaDiSQACgkQ4+MsLN6t
# wN4jmBAA2kxwFAGbKvokANDAZBwWmJdnuIPcqS+jdo/wCuQXOo1ROADd3NFlgQWx
# z1xOv/LiAmQiUeeiP+nlA8gWCdW93PErU07og1p1+N2D1sBO6oG5QDlT/tTFuEGd
# IL21jG2xWkEemd3PSN2pHKrytpS0e4S0cNZIKgTUTKdv+Mb2ZEiQi7K4zUTjcmjz
# nlsSjTXdyKBmoiqNGhITWfbR2IUWjtCpzUO44ceqXd5HDpvfGhpKI7Uwun1W2xNU
# yw1XrAFd64Qhd/lvc28G1DLfDdtRIoaRGxgLzQbU6621s0o50Ecs6TNHseuUAKvd
# tQhOtM8IEuZ6jVw8nswCPIcJyjbeY29kjI4WmD2weF1fZbDey6Emlrf+dkJUIuCb
# TximyTXw3rb1nREUVsEQLF69BKjTjE5+ETaplcTWGHCoH2+uA/5MqygalTH1Ub9W
# TwVWSUwpNvIJ3RTsT20YVowkill8piF+ECldTKzJuWjqDviiJDoMm5EFdkkcUB20
# nMyhGoiXtiQ4NYU0/B6HbHOXZkqLbhWcx9G281xJ+RRwjUyVxXD3zHGR9AoOp9ls
# EAo/2URJtGN95LJmzCtaD+oo0wRZ5+7lmnqHPPXkYUdwFm4bhe3dP4NggIrS0cXn
# 19wvBqQuPwywxIbFEu6327YtfPRcImWIlFthWnm9lUyDmbOqDKw=
# =fLCx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Jul 2024 09:59:16 PM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240702' of https://github.com/philmd/qemu: (22 commits)
Remove inclusion of hw/hw.h from files that don't need it
net/vmnet: Drop ifdef for macOS versions older than 12.0
block/file-posix: Drop ifdef for macOS versions older than 12.0
audio: Drop ifdef for macOS versions older than 12.0
hvf: Drop ifdef for macOS versions older than 12.0
hw/ide/macio: switch from using qemu_allocate_irq() to qdev input GPIOs
system/physmem: Fix reference to dump-guest-core
docs: document special exception for machine type deprecation & removal
hw/i386: remove obsolete manual deprecation reason string of i440fx machines
hw/ppc: remove obsolete manual deprecation reason string of spapr machines
hw: skip registration of outdated versioned machine types
hw: set deprecation info for all versioned machine types
include/hw: temporarily disable deletion of versioned machine types
include/hw: add macros for deprecation & removal of versioned machines
hw/i386: convert 'q35' machine definitions to use new macros
hw/i386: convert 'i440fx' machine definitions to use new macros
hw/m68k: convert 'virt' machine definitions to use new macros
hw/ppc: convert 'spapr' machine definitions to use new macros
hw/s390x: convert 'ccw' machine definitions to use new macros
hw/arm: convert 'virt' machine definitions to use new macros
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Store the command type altogether with the command handler and name.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-41-philmd@linaro.org>
Migration of a s390x guest with TCG was long known to be very unstable,
so the tests in tests/qtest/migration-test.c are disabled if running
with TCG instead of KVM.
Nicholas Piggin did a great analysis of the problem:
"The flic pending state is not migrated, so if the machine is migrated
while an interrupt is pending, it can be lost. This shows up in
qtest migration test, an extint is pending (due to console writes?)
and the CPU waits via s390_cpu_set_psw and expects the interrupt to
wake it. However when the flic pending state is lost, s390_cpu_has_int
returns false, so s390_cpu_exec_interrupt falls through to halting
again."
Thus let's finally migrate the pending state, and to be on the safe
side, also the other state variables of the QEMUS390FLICState structure.
Message-ID: <20240619144421.261342-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ASan detected a global-buffer-overflow error in the aspeed_gpio_read()
function. This issue occurred when reading beyond the bounds of the
reg_table.
To enhance the safety and maintainability of the Aspeed GPIO code, this commit
introduces a reg_table_count member to the AspeedGPIOClass structure. This
change ensures that the size of the GPIO register table is explicitly tracked
and initialized, reducing the risk of errors if new register tables are
introduced in the future.
Reproducer:
cat << EOF | qemu-system-aarch64 -display none \
-machine accel=qtest, -m 512M -machine ast1030-evb -qtest stdio
readq 0x7e780272
EOF
ASAN log indicating the issue:
==2602930==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55a5da29e128 at pc 0x55a5d700dc62 bp 0x7fff096c4e90 sp 0x7fff096c4e88
READ of size 2 at 0x55a5da29e128 thread T0
#0 0x55a5d700dc61 in aspeed_gpio_read hw/gpio/aspeed_gpio.c:564:14
#1 0x55a5d933f3ab in memory_region_read_accessor system/memory.c:445:11
#2 0x55a5d92fba40 in access_with_adjusted_size system/memory.c:573:18
#3 0x55a5d92f842c in memory_region_dispatch_read1 system/memory.c:1426:16
#4 0x55a5d92f7b68 in memory_region_dispatch_read system/memory.c:1459:9
#5 0x55a5d9376ad1 in flatview_read_continue_step system/physmem.c:2836:18
#6 0x55a5d9376399 in flatview_read_continue system/physmem.c:2877:19
#7 0x55a5d93775b8 in flatview_read system/physmem.c:2907:12
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2355
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
hw/hw.h only contains the prototype of hw_error() nowadays, so
files that don't use this function don't need to include this
header.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240701132649.58345-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This prevents the IRQs from being leaked when the macio IDE device is used.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240628160334.653168-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This calls the MACHINE_VER_DELETION() macro in the machine type
registration method, so that when a versioned machine type reaches
the end of its life, it is no longer registered with QOM and thus
cannot be used.
The actual definition of the machine type should be deleted at
this point, but experience shows that can easily be forgotten.
By skipping registration the manual code deletion task can be
done at any later date.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-12-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This calls the MACHINE_VER_DEPRECATION() macro in the definition of
all machine type classes which support versioning. This ensures
that they will automatically get deprecation info set when they
reach the appropriate point in their lifecycle.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-11-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The new deprecation and deletion policy for versioned machine types is
being introduced in QEMU 9.1.0.
Under the new policy a number of old machine types (any prior to 2.12)
would be liable for immediate deletion which would be a violation of our
historical deprecation and removal policy
Thus automatic deletions (by skipping QOM registration) are temporarily
gated on existance of the env variable "QEMU_DELETE_MACHINES" / QEMU
version number >= 10.1.0. This allows opt-in testing of the automatic
deletion logic, while activating it fully in QEMU >= 10.1.0.
This whole commit should be reverted in the 10.1.0 dev cycle or shortly
thereafter.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240620165742.1711389-10-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Versioned machines live for a long time to provide back compat for
incoming migration and restore of saved images. To guide users away from
usage of old machines, however, we want to deprecate any older than 3
years (equiv of 9 releases), and delete any older than 6 years (equiva
of 18 releases).
To get a standardized deprecation message and avoid having to remember
to manually add it after three years, this introduces two macros to be
used by targets when defining versioned machines.
* MACHINE_VER_DEPRECATION(major, minor)
Automates the task of setting the 'deprecation_reason' field on the
machine, if-and-only-if the major/minor version is older than 3 years.
* MACHINE_VER_DELETION(major, minor)
Simulates the deletion of by skipping registration of the QOM type
for a versioned machine, if-and-only-if the major/minor version is
older than 6 years.
By using these two macros there is no longer any manual work required
per-release to deprecate old machines. By preventing the use of machines
that have reached their deletion date, it is also not necessary to
manually delete machines per-release. Deletion can be batched up once a
year or whenever makes most sense.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-9-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This changes the DEFINE_I440FX_MACHINE macro to use the common
helpers for constructing versioned symbol names and strings,
bringing greater consistency across targets.
The added benefit is that it avoids the need to repeat the
version number thrice in three different formats in the calls
to DEFINE_I440FX_MACHINE.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-7-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The various targets which define versioned machine types have
a bunch of obfuscated macro code for defining unique function
and variable names using string concatenation.
This adds a couple of helpers to improve the clarity of such
code macro.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240620165742.1711389-2-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In current code, when guest does S3, virtio-gpu are reset due to the
bit No_Soft_Reset is not set. After resetting, the display resources
of virtio-gpu are destroyed, then the display can't come back and only
show blank after resuming.
Implement No_Soft_Reset bit of PCI_PM_CTRL register, then guest can check
this bit, if this bit is set, the devices resetting will not be done, and
then the display can work after resuming.
No_Soft_Reset bit is implemented for all virtio devices, and was tested
only on virtio-gpu device. Set it false by default for safety.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Message-Id: <20240606102205.114671-3-Jiqian.Chen@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Shutdown requests are normally hardware dependent.
By extending pvpanic to also handle shutdown requests, guests can
submit such requests with an easily implementable and cross-platform
mechanism.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-5-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The different components of pvpanic duplicate the list of supported
events. Move it to the shared header file to minimize changes when new
events are added.
MST: tweak: keep header included in pvpanic.c to avoid header
dependency, rebase.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-3-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-2-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All DPA ranges in the DC regions are invalid to access until an extent
covering the range has been successfully accepted by the host. A bitmap
is added to each region to record whether a DC block in the region has
been backed by a DC extent. Each bit in the bitmap represents a DC block.
When a DC extent is accepted, all the bits representing the blocks in the
extent are set, which will be cleared when the extent is released.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-13-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To simulate FM functionalities for initiating Dynamic Capacity Add
(Opcode 5604h) and Dynamic Capacity Release (Opcode 5605h) as in CXL spec
r3.1 7.6.7.6.5 and 7.6.7.6.6, we implemented two QMP interfaces to issue
add/release dynamic capacity extents requests.
With the change, we allow to release an extent only when its DPA range
is contained by a single accepted extent in the device. That is to say,
extent superset release is not supported yet.
1. Add dynamic capacity extents:
For example, the command to add two continuous extents (each 128MiB long)
to region 0 (starting at DPA offset 0) looks like below:
{ "execute": "qmp_capabilities" }
{ "execute": "cxl-add-dynamic-capacity",
"arguments": {
"path": "/machine/peripheral/cxl-dcd0",
"host-id": 0,
"selection-policy": "prescriptive",
"region": 0,
"extents": [
{
"offset": 0,
"len": 134217728
},
{
"offset": 134217728,
"len": 134217728
}
]
}
}
2. Release dynamic capacity extents:
For example, the command to release an extent of size 128MiB from region 0
(DPA offset 128MiB) looks like below:
{ "execute": "cxl-release-dynamic-capacity",
"arguments": {
"path": "/machine/peripheral/cxl-dcd0",
"host-id": 0,
"removal-policy":"prescriptive",
"region": 0,
"extents": [
{
"offset": 134217728,
"len": 134217728
}
]
}
}
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-12-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per CXL spec 3.1, two mailbox commands are implemented:
Add Dynamic Capacity Response (Opcode 4802h) 8.2.9.9.9.3, and
Release Dynamic Capacity (Opcode 4803h) 8.2.9.9.9.4.
For the process of the above two commands, we use two-pass approach.
Pass 1: Check whether the input payload is valid or not; if not, skip
Pass 2 and return mailbox process error.
Pass 2: Do the real work--add or release extents, respectively.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-11-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add dynamic capacity extent list representative to the definition of
CXLType3Dev and implement get DC extent list mailbox command per
CXL.spec.3.1:.8.2.9.9.9.2.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-10-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add (file/memory backed) host backend for DCD. All the dynamic capacity
regions will share a single, large enough host backend. Set up address
space for DC regions to support read/write operations to dynamic capacity
for DCD.
With the change, the following support is added:
1. Add a new property to type3 device "volatile-dc-memdev" to point to host
memory backend for dynamic capacity. Currently, all DC regions share one
host backend;
2. Add namespace for dynamic capacity for read/write support;
3. Create cdat entries for each dynamic capacity region.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-9-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename mem_size as static_mem_size for type3 memdev to cover static RAM and
pmem capacity, preparing for the introduction of dynamic capacity to support
dynamic capacity devices.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-6-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per cxl spec r3.1, add dynamic capacity (DC) region representative based on
Table 8-165 and extend the cxl type3 device definition to include DC region
information. Also, based on info in 8.2.9.9.9.1, add 'Get Dynamic Capacity
Configuration' mailbox support.
Note: we store region decode length as byte-wise length on the device, which
should be divided by 256 * MiB before being returned to the host
for "Get Dynamic Capacity Configuration" mailbox command per
specification.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-5-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This enables wrapper devices to customize the base device's CCI
(for example, with custom commands outside the specification)
without the need to change the base device.
The also enabled the base device to dispatch those commands without
requiring additional driver support.
Heavily edited by Jonathan Cameron to increase code reuse
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-3-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows devices to have fully customized CCIs, along with complex
devices where wrapper devices can override or add additional CCI
commands without having to replicate full command structures or
pollute a base device with every command that might ever be used.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-2-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit f02a4b8e64.
Since the current patch cannot completely fix the lost reconnect
problem, there is a scenario that is not considered:
- When the virtio-blk driver is removed from the guest os,
s->connected has no chance to be set to false, resulting in
subsequent reconnection not being executed.
The next patch will completely fix this issue with a better approach.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20240516025753.130171-2-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to virtio-pci devices for handling the extra data sent
from the driver to the device when the VIRTIO_F_NOTIFICATION_DATA
transport feature has been negotiated.
The extra data that's passed to the virtio-pci device when this
feature is enabled varies depending on the device's virtqueue
layout.
In a split virtqueue layout, this data includes:
- upper 16 bits: shadow_avail_idx
- lower 16 bits: virtqueue index
In a packed virtqueue layout, this data includes:
- upper 16 bits: 1-bit wrap counter & 15-bit shadow_avail_idx
- lower 16 bits: virtqueue index
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-2-jonah.palmer@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On setups with one or more virtio-net devices with vhost on,
dirty tracking iteration increases cost the bigger the number
amount of queues are set up e.g. on idle guests migration the
following is observed with virtio-net with vhost=on:
48 queues -> 78.11% [.] vhost_dev_sync_region.isra.13
8 queues -> 40.50% [.] vhost_dev_sync_region.isra.13
1 queue -> 6.89% [.] vhost_dev_sync_region.isra.13
2 devices, 1 queue -> 18.60% [.] vhost_dev_sync_region.isra.14
With high memory rates the symptom is lack of convergence as soon
as it has a vhost device with a sufficiently high number of queues,
the sufficient number of vhost devices.
On every migration iteration (every 100msecs) it will redundantly
query the *shared log* the number of queues configured with vhost
that exist in the guest. For the virtqueue data, this is necessary,
but not for the memory sections which are the same. So essentially
we end up scanning the dirty log too often.
To fix that, select a vhost device responsible for scanning the
log with regards to memory sections dirty tracking. It is selected
when we enable the logger (during migration) and cleared when we
disable the logger. If the vhost logger device goes away for some
reason, the logger will be re-selected from the rest of vhost
devices.
After making mem-section logger a singleton instance, constant cost
of 7%-9% (like the 1 queue report) will be seen, no matter how many
queues or how many vhost devices are configured:
48 queues -> 8.71% [.] vhost_dev_sync_region.isra.13
2 devices, 8 queues -> 7.97% [.] vhost_dev_sync_region.isra.14
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1710448055-11709-2-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The implementation of configurable interrupts (interrupts supporting
edge selection) was incorrectly expecting alternating input levels :
this commits adds a new status field `irq_levels` to actually detect
edges.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-2-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce global xen_is_stubdomain variable when qemu is running inside
a stubdomain instead of dom0. This will be relevant for subsequent
patches, as few things like accessing PCI config space need to be done
differently.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <e66aa97dca5120f22e015c19710b2ff04f525720.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
The caller of smmu_iommu_mr wants to get sdev for smmuv3_flush_config().
Do it directly instead of bridging with an iommu mr pointer.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-id: 20240619002218.926674-1-nicolinc@nvidia.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Four mailbox properties are implemented as follows:
1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP
2. Device-specific private key: GET_PRIVATE_KEY and
SET_PRIVATE_KEY.
The customer OTP is located in the rows 36-43. The device-specific private key
is located in the rows 56-63.
The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000
when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates
this lock, which is undocumented. The lock also applies to the device-specific
private key.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace stubbed OTP memory region with the new OTP device.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The OTP device registers are currently stubbed. For now, the device
houses the OTP rows which will be accessed directly by other peripherals.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hmp_info_roms() was removed in commit dd98234c05 ("qapi:
introduce x-query-roms QMP command"),
hmp_info_numa() in commit 1b8ae799d8 ("qapi: introduce
x-query-numa QMP command"),
hmp_info_ramblock() in commit ca411b7c8a ("qapi: introduce
x-query-ramblock QMP command")
and hmp_info_irq() in commit 91f2fa7045 ("qapi: introduce
x-query-irq QMP command").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The typeof_strip_qual() is most useful for the atomic fetch-and-modify
operations in atomic.h, but it can be used elsewhere as well. For example,
QAPI_LIST_LENGTH() assumes that the argument is not const, which is not a
requirement.
Move the macro to compiler.h and, while at it, move it under #ifndef
__cplusplus to emphasize that it uses C-only constructs. A C++ version
of typeof_strip_qual() using type traits is possible[1], but beyond the
scope of this patch because the little C++ code that is in QEMU does not
use QAPI.
The patch was tested by changing the declaration of strv_from_str_list()
in qapi/qapi-type-helpers.c to:
char **strv_from_str_list(const strList *const list)
This is valid C code, and it fails to compile without this change.
[1] https://lore.kernel.org/qemu-devel/20240624205647.112034-1-flwu@google.com/
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Tested-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
void* pointer arithmetic is a GCC extentension which could not be
available in other build tools (e.g. C++). This changes removes this
assumption.
Signed-off-by: Roman Kiryanov <rkir@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20240620201654.598024-1-rkir@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bdrv_file_open and bdrv_open are completely equivalent, they are
never checked except to see which one to invoke. So merge them
into a single one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need #address-cells properties in all interrupt controllers that are
referred by an interrupt-map [1]. For the RISC-V machine, both PLIC and
APLIC controllers must have this property.
PLIC already sets it in create_fdt_socket_plic(). Set the property for
APLIC in create_fdt_one_aplic().
[1] https://lore.kernel.org/linux-arm-kernel/CAL_JsqJE15D-xXxmELsmuD+JQHZzxGzdXvikChn6KFWqk6NzPw@mail.gmail.com/
Suggested-by: Anup Patel <apatel@ventanamicro.com>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
One fix and various cleanups for the SD card model.
-----BEGIN PGP SIGNATURE-----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=O5er
-----END PGP SIGNATURE-----
Merge tag 'sdmmc-20240624' of https://github.com/philmd/qemu into staging
SD/MMC patches queue
One fix and various cleanups for the SD card model.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmZ5cRUACgkQ4+MsLN6t
# wN59Qw//cUdjD287pB5Ml5aQqr9sOTyVnHUceZtz7AOZ5w8RM2tlPDgOImeLOvU6
# OV7qfWvNaUxtQxhfh5jpe8Pj4eHBtRQzA6a1AWToEvnN4189QWHZpqf5TUa4AlFS
# uAk7k2TkoNv9zbNKca0bP3L1x6sT9l0VPZBLaLbgdXDIX2ycD0r3NVQxXb/bJRgM
# 6pFRcLCF/isKzLQDwqnTa11hB/JDTvOU7xnY0kazGRvyWjbSvE2sOJzLNJXHkW0I
# /FNfRbOKJo2t+47Z5qSXUFFLeIEBTy7VqNBsOQ6sMIgrWzbOSrtBcuxKp0p9NCGH
# fdZHlDVRnNGXewUya4RjbmXiCNuGL4zJ82b2BaQZVd5ZwU2opIr8xO96WCojQ4dZ
# +Dq3uv7su3PUVOh95i38Eo93OG9jXFx642XD4q2uKu5j70IoGXAkIoLUcFkZZdGS
# 9rCsaNUHyHJrN6nXf3Cekvkqxz36p6QXaUF9I1vB0JF6CrexMD35sBUK+RE9k4uW
# LnqL7ZwQDGDGVl3kPS/VCXv1mMim4aRLSEIveq7Ui6dKzaaJMIIodZ8CFMuyTTsD
# cGE+Cd053nf6SzX3+kEZftNdjtJ906O8xIAw+RNdARYx003l4kUxgsPDk7ELyzIP
# Tb+VlZl2P+ROJmeWvRMTW7ZQ49M9IEMrg8zlGF4hLCxB1JndeOA=
# =O5er
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Jun 2024 06:13:57 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'sdmmc-20240624' of https://github.com/philmd/qemu:
hw/sd/sdcard: Add comments around registers and commands
hw/sd/sdcard: Inline BLK_READ_BLOCK / BLK_WRITE_BLOCK macros
hw/sd/sdcard: Add sd_invalid_mode_for_cmd to report invalid mode switch
hw/sd/sdcard: Only call sd_req_get_address() where address is used
hw/sd/sdcard: Factor sd_req_get_address() method out
hw/sd/sdcard: Only call sd_req_get_rca() where RCA is used
hw/sd/sdcard: Factor sd_req_get_rca() method out
hw/sd/sdcard: Have cmd_valid_while_locked() return a boolean value
hw/sd/sdcard: Trace update of block count (CMD23)
hw/sd/sdcard: Remove explicit entries for illegal commands
hw/sd/sdcard: Remove ACMD6 handler for SPI mode
hw/sd/sdcard: Use Load/Store API to fill some CID/CSD registers
hw/sd/sdcard: Use registerfield CSR::CURRENT_STATE definition
hw/sd/sdcard: Use HWBLOCK_SHIFT definition instead of magic values
hw/sd/sdcard: Fix typo in SEND_OP_COND command name
hw/sd/sdcard: Rewrite sd_cmd_ALL_SEND_CID using switch case (CMD2)
hw/sd/sdcard: Correct code indentation
hw/sd/sdcard: Avoid OOB in sd_read_byte() during unexpected CMD switch
bswap: Add st24_be_p() to store 24 bits in big-endian order
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
vfio_container_destroy() clears the resources allocated
VFIOContainerBase object. Now that VFIOContainerBase is a QOM object,
add an instance_finalize() handler to do the cleanup. It will be
called through object_unref().
Suggested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
It's now empty.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Instead, use VFIO_IOMMU_GET_CLASS() to get the class pointer.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
VFIOContainerBase was made a QOM interface because we believed that a
QOM object would expose all the IOMMU backends to the QEMU machine and
human interface. This only applies to user creatable devices or objects.
Change the VFIOContainerBase nature from interface to object and make
the necessary adjustments in the VFIO_IOMMU hierarchy.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Assign the base container VFIOAddressSpace 'space' pointer in
vfio_address_space_insert(). The ultimate goal is to remove
vfio_container_init() and instead rely on an .instance_init() handler
to perfom the initialization of VFIOContainerBase.
To be noted that vfio_connect_container() will assign the 'space'
pointer later in the execution flow. This should not have any
consequence.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
It prepares ground for a future change initializing the 'space' pointer
of VFIOContainerBase. The goal is to replace vfio_container_init() by
an .instance_init() handler when VFIOContainerBase is QOMified.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
These were forgotten in the recent cleanups.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Since the host IOVA ranges are now passed through the
PCIIOMMUOps set_host_resv_regions and we have removed
the only implementation of iommu_set_iova_range() in
the virtio-iommu and the only call site in vfio/common,
let's retire the IOMMU MR API and its memory wrapper.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Store the aliased bus and devfn in the HostIOMMUDevice.
This will be useful to handle info that are iommu group
specific and not device specific (such as reserved
iova ranges).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new HostIOMMUDevice callback that allows to
retrieve the usable IOVA ranges.
Implement this callback in the legacy VFIO and IOMMUFD VFIO
host iommu devices. This relies on the VFIODevice agent's
base container iova_ranges resource.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Implement PCIIOMMUOPs [set|unset]_iommu_device() callbacks.
In set(), the HostIOMMUDevice handle is stored in a hash
table indexed by PCI BDF. The object will allow to retrieve
information related to the physical IOMMU.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Store the agent device (VFIO or VDPA) in the host IOMMU device.
This will allow easy access to some of its resources.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Implement [set|unset]_iommu_device() callbacks in Intel vIOMMU.
In set call, we take a reference of HostIOMMUDevice and store it
in hash table indexed by PCI BDF.
Note this BDF index is device's real BDF not the aliased one which
is different from the index of VTDAddressSpace. There can be multiple
assigned devices under same virtual iommu group and share same
VTDAddressSpace, but each has its own HostIOMMUDevice.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
pci_device_[set|unset]_iommu_device() call pci_device_get_iommu_bus_devfn()
to get iommu_bus->iommu_ops and call [set|unset]_iommu_device callback to
set/unset HostIOMMUDevice for a given PCI device.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Create host IOMMU device instance in vfio_attach_device() and call
.realize() to initialize it further.
Introuduce attribute VFIOIOMMUClass::hiod_typename and initialize
it based on VFIO backend type. It will facilitate HostIOMMUDevice
creation in vfio_attach_device().
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a helper function iommufd_backend_get_device_info() to get
host IOMMU related information through iommufd uAPI.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The realize function populates the capabilities. For now only the
aw_bits caps is computed for legacy backend.
Introduce a helper function vfio_device_get_aw_bits() which calls
range_get_last_bit() to get host aw_bits and package it in
HostIOMMUDeviceCaps for query with .get_cap(). This helper will
also be used by iommufd backend.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This helper get the highest 1 bit position of the upper bound.
If the range is empty or upper bound is zero, -1 is returned.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_HOST_IOMMU_DEVICE_IOMMUFD represents a host IOMMU device under
iommufd backend. It is abstract, because it is going to be derived
into VFIO or VDPA type'd device.
It will have its own .get_cap() implementation.
TYPE_HOST_IOMMU_DEVICE_IOMMUFD_VFIO is a sub-class of
TYPE_HOST_IOMMU_DEVICE_IOMMUFD, represents a VFIO type'd host IOMMU
device under iommufd backend. It will be created during VFIO device
attaching and passed to vIOMMU.
It will have its own .realize() implementation.
Opportunistically, add missed header to include/sysemu/iommufd.h.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_HOST_IOMMU_DEVICE_LEGACY_VFIO represents a host IOMMU device under
VFIO legacy container backend.
It will have its own realize implementation.
Suggested-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
HostIOMMUDeviceCaps's elements map to the host IOMMU's capabilities.
Different platform IOMMU can support different elements.
Currently only two elements, type and aw_bits, type hints the host
platform IOMMU type, i.e., INTEL vtd, ARM smmu, etc; aw_bits hints
host IOMMU address width.
Introduce .get_cap() handler to check if HOST_IOMMU_DEVICE_CAP_XXX
is supported.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
A HostIOMMUDevice is an abstraction for an assigned device that is protected
by a physical IOMMU (aka host IOMMU). The userspace interaction with this
physical IOMMU can be done either through the VFIO IOMMU type 1 legacy
backend or the new iommufd backend. The assigned device can be a VFIO device
or a VDPA device. The HostIOMMUDevice is needed to interact with the host
IOMMU that protects the assigned device. It is especially useful when the
device is also protected by a virtual IOMMU as this latter use the translation
services of the physical IOMMU and is constrained by it. In that context the
HostIOMMUDevice can be passed to the virtual IOMMU to collect physical IOMMU
capabilities such as the supported address width. In the future, the virtual
IOMMU will use the HostIOMMUDevice to program the guest page tables in the
first translation stage of the physical IOMMU.
Introduce .realize() to initialize HostIOMMUDevice further after instance init.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
- add missing include guard comment to gdbstub.h
- move gdbstub enums into separate header
- move qtest_[get|set]_virtual_clock functions
- allow plugins to manipulate the virtual clock
- introduce an Instructions Per Second plugin
- fix inject_mem_cb rw mask tests
- allow qemu_plugin_vcpu_mem_cb to shortcut when no memory cbs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmZ5OjoACgkQ+9DbCVqe
KkQPlwf/VK673BAjYktuCLnf3DgWvIkkiHWwzBREP5MmseUloLjK2CQPLY/xWZED
pbA/1OSzHViD/mvG5wTxwef36b9PIleWj5/YwBxGlrb/rh6hCd9004pZK4EMI3qU
53SK8Qron8TIXjey6XfmAY8rcl030GsHr0Zqf5i2pZKE5g0iaGlM3Cwkpo0SxQsu
kMNqiSs9NzX7LxB+YeuAauIvC1YA2F/MGTXeFCTtO9Beyp5oV7oOI+2zIvLjlG5M
Z5hKjG/STkNOteoIBGZpe1+QNpoGHSBoGE3nQnGpXb82iLx1KVBcKuQ6GoWGv1Wo
hqiSh9kJX479l0mLML+IzaDsgSglbg==
=pvWx
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-june24-240624-1' of https://gitlab.com/stsquad/qemu into staging
maintainer updates (plugins, gdbstub):
- add missing include guard comment to gdbstub.h
- move gdbstub enums into separate header
- move qtest_[get|set]_virtual_clock functions
- allow plugins to manipulate the virtual clock
- introduce an Instructions Per Second plugin
- fix inject_mem_cb rw mask tests
- allow qemu_plugin_vcpu_mem_cb to shortcut when no memory cbs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmZ5OjoACgkQ+9DbCVqe
# KkQPlwf/VK673BAjYktuCLnf3DgWvIkkiHWwzBREP5MmseUloLjK2CQPLY/xWZED
# pbA/1OSzHViD/mvG5wTxwef36b9PIleWj5/YwBxGlrb/rh6hCd9004pZK4EMI3qU
# 53SK8Qron8TIXjey6XfmAY8rcl030GsHr0Zqf5i2pZKE5g0iaGlM3Cwkpo0SxQsu
# kMNqiSs9NzX7LxB+YeuAauIvC1YA2F/MGTXeFCTtO9Beyp5oV7oOI+2zIvLjlG5M
# Z5hKjG/STkNOteoIBGZpe1+QNpoGHSBoGE3nQnGpXb82iLx1KVBcKuQ6GoWGv1Wo
# hqiSh9kJX479l0mLML+IzaDsgSglbg==
# =pvWx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Jun 2024 02:19:54 AM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
* tag 'pull-maintainer-june24-240624-1' of https://gitlab.com/stsquad/qemu:
accel/tcg: Avoid unnecessary call overhead from qemu_plugin_vcpu_mem_cb
plugins: fix inject_mem_cb rw masking
contrib/plugins: add Instructions Per Second (IPS) example for cost modeling
plugins: add migration blocker
plugins: add time control API
qtest: move qtest_{get, set}_virtual_clock to accel/qtest/qtest.c
sysemu: generalise qtest_warp_clock as qemu_clock_advance_virtual_time
qtest: use cpu interface in qtest_clock_warp
sysemu: add set_virtual_time to accel ops
plugins: Ensure register handles are not NULL
gdbstub: move enums into separate header
include/exec: add missing include guard comment
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expose the ability to control time through the plugin API. Only one
plugin can control time so it has to request control when loaded.
There are probably more corner cases to catch here.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
[AJB: tweaked user-mode handling, merged QEMU_PLUGIN_API fix]
Message-Id: <20240530220610.1245424-6-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-9-alex.bennee@linaro.org>
Move the key functionality of moving time forward into the clock
sub-system itself. This will allow us to plumb in time control into
plugins.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-7-alex.bennee@linaro.org>
This generalises the qtest_clock_warp code to use the AccelOps
handlers for updating its own sense of time. This will make the next
patch which moves the warp code closer to pure code motion.
From: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240530220610.1245424-3-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-6-alex.bennee@linaro.org>
We are about to remove direct calls to individual accelerators for
this information and will need a central point for plugins to hook
into time changes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240530220610.1245424-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-5-alex.bennee@linaro.org>
This is an experiment to further reduce the amount we throw into the
exec headers. It might not be as useful as I initially thought because
just under half of the users also need gdbserver_start().
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240620152220.2192768-3-alex.bennee@linaro.org>
Commit 14180d6221 ("bswap: Add the ability to store to an
unaligned 24 bit field") added st24_le_p() for little
endianness, add st24_be_p() equivalent for bit one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240621075607.17902-1-philmd@linaro.org>
Since the realize() handler of S390CCWDeviceClass takes an 'Error **'
argument, best practices suggest to return a bool. See the api/error.h
Rules section. While at it, modify the call in vfio_ccw_realize().
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-5-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Last use of VMSTATE_ARRAY_TEST() was removed in commit 46baa9007f
("migration/i386: Remove old non-softfloat 64bit FP support"), we
can safely get rid of it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
For some use-cases, it is helpful to have more than one UART
available to the guest. If the second UART slot is not already used
for a TrustZone Secure-World-only UART, create it as a NonSecure UART
only when the user provides a serial backend (e.g. via a second
-serial command line option).
This avoids problems where existing guest software only expects a
single UART, and gets confused by the second UART in the DTB. The
major example of this is older EDK2 firmware, which will send the
GRUB bootloader output to UART1 and the guest serial output to UART0.
Users who want to use both UARTs with a guest setup including EDK2
are advised to update to EDK2 release edk2-stable202311 or newer.
(The prebuilt EDK2 blobs QEMU upstream provides are new enough.)
The relevant EDK2 changes are the ones described here:
https://bugzilla.tianocore.org/show_bug.cgi?id=4577
Inspired-by: Axel Heider <axel.heider@hensoldt.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-4-peter.maydell@linaro.org
We're going to make the second UART not always a secure-only device.
Rename the constants VIRT_UART and VIRT_SECURE_UART to VIRT_UART0
and VIRT_UART1 accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-3-peter.maydell@linaro.org
Add the direct-io migration parameter that tells the migration code to
use O_DIRECT when opening the migration stream file whenever possible.
This is currently only used with the mapped-ram migration that has a
clear window guaranteed to perform aligned writes.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
I'm keeping the EACCES because callers expect to be able to look at
errno.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Those functions are not needed, one remove function should already
work. Clean it up.
Here the code doesn't really care about whether we need to keep that dupfd
around if close() failed: when that happens something got very wrong,
keeping the dup_fd around the fdsets may not help that situation so far.
Cc: Dr. David Alan Gilbert <dave@treblig.org>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[add missing return statement, removal during traversal is not safe]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Make the MemOp enum cast explicit to use the QEMU
headers with a C++ compiler.
Signed-off-by: Roman Kiryanov <rkir@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240618224528.878425-1-rkir@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Boolean return value is reversed, to align with QEMU_ALLOCATED_FLAG, so
all callers must be adapted. Also rename share_surface variable in
vga_draw_graphic() to reduce confusion.
No functional change.
Suggested-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240605131444.797896-4-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
s390_skeys_set() dispatch to S390SKeysClass::set_skeys(),
and s390_skeys_get() to S390SKeysClass::get_skeys().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240613104415.9643-2-philmd@linaro.org>
The real IPI hardware have dedicated MMIO registers mapped into
memory address space for every core. This is not used by LoongArch
guest software but it is essential for CPU without IOCSR such as
Loongson-3A1000.
Implement it with existing infrastructure.
Acked-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-ID: <20240605-loongson3-ipi-v3-2-ddd2c0e03fa3@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
@event access is read-only.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20240612132532.85928-3-philmd@linaro.org>
@event access is read-only.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20240612132532.85928-2-philmd@linaro.org>
Replace Monitor API by HumanReadableText one (see commit f2de406f29
"docs/devel: document expectations for QAPI data modelling for QMP"
for rationale).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240610063518.50680-2-philmd@linaro.org>
PCMachineClass::acpi_data_size was only used by the pc-i440fx-2.0
machine, which got removed. Since it is constant, replace the class
field by a definition (local to hw/i386/pc.c, since not used
elsewhere).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-24-philmd@linaro.org>
PCMachineClass::rsdp_in_ram was only used by the
pc-i440fx-2.2 machine, which got removed. It is
now always true. Remove it, simplifying acpi_setup().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-19-philmd@linaro.org>
PCMachineClass::resizable_acpi_blob was only used by the
pc-i440fx-2.2 machine, which got removed. It is now always
true. Remove it, simplifying acpi_build().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-18-philmd@linaro.org>
The pc-i440fx-2.2 machine was deprecated for the 8.2
release (see commit c7437f0ddb "docs/about: Mark the
old pc-i440fx-2.0 - 2.3 machine types as deprecated"),
time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-17-philmd@linaro.org>
'legacy_align' is always NULL, remove it, simplifying
memory_device_pre_plug().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-16-philmd@linaro.org>
'legacy_align' is always NULL, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-15-philmd@linaro.org>
PCMachineClass::enforce_aligned_dimm was only used by the
pc-i440fx-2.1 machine, which got removed. It is now always
true. Remove it, simplifying pc_get_device_memory_range().
Update the comment in Avocado test_phybits_low_pse36().
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-14-philmd@linaro.org>
'uuid_encoded' is always true, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-12-philmd@linaro.org>
PCMachineClass::smbios_uuid_encoded was only used by the
pc-i440fx-2.1 machine, which got removed. It is now always
true, remove it.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-11-philmd@linaro.org>
The pc-i440fx-2.1 machine was deprecated for the 8.2
release (see commit c7437f0ddb "docs/about: Mark the
old pc-i440fx-2.0 - 2.3 machine types as deprecated"),
time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-9-philmd@linaro.org>
PCMachineClass::legacy_acpi_table_size was only used by the
pc-i440fx-2.0 machine, which got removed. Remove it and simplify
acpi_build().
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240617071118.60464-6-philmd@linaro.org>
The pc-i440fx-2.0 machine was deprecated for the 8.2
release (see commit c7437f0ddb "docs/about: Mark the
old pc-i440fx-2.0 - 2.3 machine types as deprecated"),
time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-3-philmd@linaro.org>
AST2700 dram size calculation is not back compatible AST2600.
According to the DDR capacity hardware behavior,
if users write the data to the address which is beyond the ram size,
it would write the data to the "address % ram_size".
For example:
a. sdram base address "0x4 00000000"
b. sdram size 1 GiB
The available address range is from "0x4 00000000" to "0x4 3FFFFFFF".
If users write 0x12345678 to address "0x5 00000000",
the value of DRAM address 0 (base address 0x4 00000000) will be 0x12345678.
Add aspeed_soc_ast2700_dram_init to calculate the dram size and add
memory I/O whose address range is from "max_ram_size - ram_size" to max_ram_size
and its read/write handler to emulate DDR capacity hardware behavior.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35 CPU).
AST2700 SOC and its interrupt controller are too complex to handle
in the common Aspeed SoC framework. We introduce a new ast2700
class with instance_init and realize handlers.
AST2700 is a 64 bits quad core cpus and support 8 watchdog.
Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8.
In addition, update AspeedSocState to support scuio, sli, sliio and intc.
Add TYPE_ASPEED27X0_SOC machine type.
The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting
start from u-boot stage. Set SDMC controller
unlocked by default.
In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts.
It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136.
And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to
GICINT or-gates instead of GIC device.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 interrupt controller(INTC) provides hardware interrupt interfaces
to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of
INT 128 to INT136 combines 32 interrupts.
Introduce a new aspeed_intc class with instance_init and realize handlers.
So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources
from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which
connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which
connect to GIC device with GIC IRQ 128 to 136.
If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by
OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and
set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq
callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).
Block diagram of GICINT132:
GICINT132
ETH1 +-----------+
+-------->+0 3|
ETH2 | 4|
+-------->+1 5|
ETH3 | 6|
+-------->+2 19| INTC GIC
UART0 | 20| +--------------------------+
+-------->+7 21| | | +--------------+
UART1 | 22| |orgate0 +----> output_pin0+----------->+GIC128 |
+-------->+8 23| | | | |
UART2 | 24| |orgate1 +----> output_pin1+----------->+GIC129 |
+-------->+9 25| | | | |
UART3 | 26| |orgate2 +----> output_pin2+----------->+GIC130 |
+--------->10 27| | | | |
UART5 | 28| |orgate3 +----> output_pin3+----------->+GIC131 |
+-------->+11 29| | | | |
UART6 | +----------->+orgate4 +----> output_pin4+----------->+GIC132 |
+-------->+12 30| | | | |
UART7 | 31| |orgate5 +----> output_pin5+----------->+GIC133 |
+-------->+13 | | | | |
UART8 | OR[0:31] | |orgate6 +----> output_pin6+----------->+GIC134 |
---------->14 | | | | |
UART9 | | |orgate7 +----> output_pin7+----------->+GIC135 |
--------->+15 | | | | |
UART10 | | |orgate8 +----> output_pin8+----------->+GIC136 |
--------->+16 | | | +--------------+
UART11 | | +--------------------------+
+-------->+17 |
UART12 | |
+--------->18 |
| |
| |
| |
+-----------+
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[clg: Fixed class_size in TYPE_ASPEED_INTC definition ]
AST2700 have two SCU controllers which are SCU and SCUIO.
Both SCU and SCUIO registers are not compatible previous SOCs
, introduces new registers and adds ast2700 scu, sucio class init handler.
The pclk divider selection of SCUIO is defined in SCUIO280[20:18] and
the pclk divider selection of SCU is defined in SCU280[25:23].
Both of them are not compatible AST2600 SOCs, adds a get_apb_freq function
and trace-event for AST2700 SCU and SCUIO.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[clg: Fixed spelling : Unhandeled -> Unhandled ]
It set "aspeed_smc_flash_ops" struct which containing
read and write callbacks to be used when I/O is performed
on the SMC flash region. And it set the valid max_access_size 4
by default for all ASPEED SMC models.
However, the valid max_access_size 4 only support 32 bits CPUs.
To support all ASPEED SMC model, introduce a new
"const MemoryRegionOps *" attribute in AspeedSMCClass and
use it in aspeed_smc_flash_realize function.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
DMA length is from 1 byte to 32MB for AST2600 and AST10x0
and DMA length is from 4 bytes to 32MB for AST2500.
In other words, if "R_DMA_LEN" is 0, it should move at least 1 byte
data for AST2600 and AST10x0 and 4 bytes data for AST2500.
To support all ASPEED SOCs, adds dma_start_length parameter to store
the start length, add helper routines function to compute the dma length
and update DMA_LENGTH mask to "1FFFFFF" to support dma 1 byte
length unit for AST2600 and AST1030.
Currently, only supports dma length 4 bytes aligned.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The SDRAM memory controller(DRAMC) controls the access to external
DDR4 and DDR5 SDRAM and power up to DDR4 and DDR5 PHY.
The DRAM memory controller of AST2700 is not backward compatible
to previous chips such AST2600, AST2500 and AST2400.
Max memory is now 8GiB on the AST2700. Introduce new
aspeed_2700_sdmc and class with read/write operation and
reset handlers.
Define DRAMC necessary protected registers and
unprotected registers for AST2700 and increase
the register set to 0x1000.
Add unlocked property to change controller protected status.
Incrementing the version of vmstate to 2.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 SLI engine is designed to accelerate the
throughput between cross-die connections.
It have CPU_SLI at CPU die and IO_SLI at IO die.
Introduce dummy AST2700 SLI and SLIIO models.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 wdt controller is similiar to AST2600's wdt, but
the AST2700 has 8 watchdogs, and they each have 0x80 of registers.
Introduce ast2700 object class and increase the number of regs(offset) of
ast2700 model.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The Aspeed SMC device model use to have a 'sdram_base' property. It
was removed by commit d177892d4a ("aspeed/smc: Remove unused
"sdram-base" property") because previous changes simplified the DMA
transaction model to use an offset in RAM and not the physical
address.
The AST2700 SoC has larger address space (64-bit) and a new register
DMA DRAM Side Address High Part (0x7C) is introduced to deal with the
high bits of the DMA address. To be able to compute the offset of the
DMA transaction, as done on the other SoCs, we will need to know where
the DRAM is mapped in the address space. Re-introduce a "dram-base"
property to hold this value.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The n_threads argument is no longer used since the previous commit.
Remove it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240527155851.892885-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Libaio defines IO_CMD_FDSYNC command to sync all outstanding
asynchronous I/O operations, by flushing out file data to the
disk storage. Enable linux-aio to submit such aio request.
When using aio=native without fdsync() support, QEMU creates
pthreads, and destroying these pthreads results in TLB flushes.
In a real-time guest environment, TLB flushes cause a latency
spike. This patch helps to avoid such spikes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-ID: <20240425070412.37248-1-ppandit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The main loop has two AioContexts: qemu_aio_context and iohandler_ctx.
The main loop runs them both, but nested aio_poll() calls on
qemu_aio_context exclude iohandler_ctx.
Which one should qemu_get_current_aio_context() return when called from
the main loop? Document that it's always qemu_aio_context.
This has subtle effects on functions that use
qemu_get_current_aio_context(). For example, aio_co_reschedule_self()
does not work when moving from iohandler_ctx to qemu_aio_context because
qemu_get_current_aio_context() does not differentiate these two
AioContexts.
Document this in order to reduce the chance of future bugs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240506190622.56095-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a second mapcache for grant mappings. The mapcache for
grants needs to work with XC_PAGE_SIZE granularity since
we can't map larger ranges than what has been granted to us.
Like with foreign mappings (xen_memory), machines using grants
are expected to initialize the xen_grants MR and map it
into their address-map accordingly.
CC: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Pass the ram_addr offset to xen_map_cache.
This is in preparation for adding grant mappings that need
to compute the address within the RAMBlock.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* backends/hostmem: Report error on unavailable qemu_madvise() features or unaligned memory sizes
* target/i386: fixes and documentation for INHIBIT_IRQ/TF/RF and debugging
* i386/hvf: Adds support for INVTSC cpuid bit
* i386/hvf: Fixes for dirty memory tracking
* i386/hvf: Use hv_vcpu_interrupt() and hv_vcpu_run_until()
* hvf: Cleanups
* stubs: fixes for --disable-system build
* i386/kvm: support for FRED
* i386/kvm: fix MCE handling on AMD hosts
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZkF2oUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNlQf+N9y6Eh0nMEEQ69twtV8ytglTY+uX
FsogvnsXHNMVubOWmmeItM6kFXTAkR9cmFaL8dqI1Gs03xEQdQXbF1KejJZOAZVl
RQMOW8Fg2Afr+0lwqCXHvhsmZ4hr5yUkRndyucA/E9AO2uGrtgwsWGDBGaHJOZIA
lAsEMOZgKjXHZnefXjhMrvpk/QNovjEV6f1RHX3oKZjKSI5/G4IqGSmwNYToot8p
2fgs4Qti4+1gNyM2oBLq7cCMjMS61tSxOMH4uqVoIisjyckPlAFRvc+DXtKsUAAs
9AgM++pNgpB0IXv67czRUNdRoK7OI8I0ULhI4qHXi6Yg2QYAHqpQ6WL4Lg==
=RP7U
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* scsi-disk: Don't silently truncate serial number
* backends/hostmem: Report error on unavailable qemu_madvise() features or unaligned memory sizes
* target/i386: fixes and documentation for INHIBIT_IRQ/TF/RF and debugging
* i386/hvf: Adds support for INVTSC cpuid bit
* i386/hvf: Fixes for dirty memory tracking
* i386/hvf: Use hv_vcpu_interrupt() and hv_vcpu_run_until()
* hvf: Cleanups
* stubs: fixes for --disable-system build
* i386/kvm: support for FRED
* i386/kvm: fix MCE handling on AMD hosts
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZkF2oUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNlQf+N9y6Eh0nMEEQ69twtV8ytglTY+uX
# FsogvnsXHNMVubOWmmeItM6kFXTAkR9cmFaL8dqI1Gs03xEQdQXbF1KejJZOAZVl
# RQMOW8Fg2Afr+0lwqCXHvhsmZ4hr5yUkRndyucA/E9AO2uGrtgwsWGDBGaHJOZIA
# lAsEMOZgKjXHZnefXjhMrvpk/QNovjEV6f1RHX3oKZjKSI5/G4IqGSmwNYToot8p
# 2fgs4Qti4+1gNyM2oBLq7cCMjMS61tSxOMH4uqVoIisjyckPlAFRvc+DXtKsUAAs
# 9AgM++pNgpB0IXv67czRUNdRoK7OI8I0ULhI4qHXi6Yg2QYAHqpQ6WL4Lg==
# =RP7U
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 08 Jun 2024 01:33:46 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (42 commits)
python: mkvenv: remove ensure command
Revert "python: use vendored tomli"
i386: Add support for overflow recovery
i386: Add support for SUCCOR feature
i386: Fix MCE support for AMD hosts
docs: i386: pc: Avoid mentioning limit of maximum vCPUs
target/i386: Add get/set/migrate support for FRED MSRs
target/i386: enumerate VMX nested-exception support
vmxcap: add support for VMX FRED controls
target/i386: mark CR4.FRED not reserved
target/i386: add support for FRED in CPUID enumeration
hvf: Makes assert_hvf_ok report failed expression
i386/hvf: Updates API usage to use modern vCPU run function
i386/hvf: In kick_vcpu use hv_vcpu_interrupt to force exit
i386/hvf: Fixes dirty memory tracking by page granularity RX->RWX change
hvf: Consistent types for vCPU handles
i386/hvf: Fixes some compilation warnings
i386/hvf: Adds support for INVTSC cpuid bit
stubs/meson: Fix qemuutil build when --disable-system
scsi-disk: Don't silently truncate serial number
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When a macOS Hypervisor.framework call fails which is checked by
assert_hvf_ok(), Qemu exits printing the error value, but not the
location
in the code, as regular assert() macro expansions would.
This change turns assert_hvf_ok() into a macro similar to other
assertions, which expands to a call to the corresponding _impl()
function together with information about the expression that failed
the assertion and its location in the code.
Additionally, stringifying the numeric hv_return_t code is factored
into a helper function that can be reused for diagnostics and debugging
outside of assertions.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-ID: <20240605112556.43193-8-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
macOS Hypervisor.framework uses different types for identifying vCPUs, hv_vcpu_t or hv_vcpuid_t, depending on host architecture. They are not just differently named typedefs for the same primitive type, but reference different-width integers.
Instead of using an integer type and casting where necessary, this change introduces a typedef which resolves the active architecture’s hvf typedef. It also removes a now-unnecessary cast.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20240605112556.43193-4-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If memory-backend-{file,ram} has a size that's not aligned to
underlying page size it is not only wasteful, but also may lead
to hard to debug behaviour. For instance, in case
memory-backend-file and hugepages, madvise() and mbind() fail.
Rightfully so, page is the smallest unit they can work with. And
even though an error is reported, the root cause it not very
clear:
qemu-system-x86_64: Couldn't set property 'dump' on 'memory-backend-file': Invalid argument
After this commit:
qemu-system-x86_64: backend 'memory-backend-file' memory size must be multiple of 2 MiB
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Message-ID: <b5b9f9c6bba07879fb43f3c6f496c69867ae3716.1717584048.git.mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a new board attribute 'v-eiointc'.
A value of true enables the virt extended I/O interrupt controller.
VMs working in kvm mode have 'v-eiointc' enabled by default.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-4-gaosong@loongson.cn>
Generalize the current 1 byte unit and 4 byte blocking
within the output.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240412073346.458116-5-richard.henderson@linaro.org>
Allocate a new, or append to an existing GString instead of
using a fixed sized buffer. Require the caller to determine
the length of the line -- do not bound len here.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240412073346.458116-4-richard.henderson@linaro.org>
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
=qQeP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* virtio-blk: remove SCSI passthrough functionality
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
# b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
# 49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
# Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
# eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
# llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
# =qQeP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 02:01:10 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
hw/i386: Add support for loading BIOS using guest_memfd
hw/i386/sev: Use guest_memfd for legacy ROMs
memory: Introduce memory_region_init_ram_guest_memfd()
i386/sev: Allow measured direct kernel boot on SNP
i386/sev: Reorder struct declarations
i386/sev: Extract build_kernel_loader_hashes
i386/sev: Enable KVM_HC_MAP_GPA_RANGE hcall for SNP guests
i386/kvm: Add KVM_EXIT_HYPERCALL handling for KVM_HC_MAP_GPA_RANGE
i386/sev: Invoke launch_updata_data() for SNP class
i386/sev: Invoke launch_updata_data() for SEV class
hw/i386/sev: Add support to encrypt BIOS when SEV-SNP is enabled
i386/sev: Add support for SNP CPUID validation
i386/sev: Add support for populating OVMF metadata pages
hw/i386/sev: Add function to get SEV metadata from OVMF header
i386/sev: Set CPU state to protected once SNP guest payload is finalized
i386/sev: Add handling to encrypt/finalize guest launch data
i386/sev: Add the SNP launch start context
i386/sev: Update query-sev QAPI format to handle SEV-SNP
i386/sev: Add a class method to determine KVM VM type for SNP guests
i386/sev: Don't return launch measurements for SEV-SNP guests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce memory_region_init_ram_guest_memfd() to allocate private
guset memfd on the MemoryRegion initialization. It's for the use case of
TDVF, which must be private on TDX case.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-4-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In SNP, the hashes page designated with a specific metadata entry
published in AmdSev OVMF.
Therefore, if the user enabled kernel hashes (for measured direct boot),
QEMU should prepare the content of hashes table, and during the
processing of the metadata entry it copy the content into the designated
page and encrypt it.
Note that in SNP (unlike SEV and SEV-ES) the measurements is done in
whole 4KB pages. Therefore QEMU zeros the whole page that includes the
hashes table, and fills in the kernel hashes area in that page, and then
encrypts the whole page. The rest of the page is reserved for SEV
launch secrets which are not usable anyway on SNP.
If the user disabled kernel hashes, QEMU pre-validates the kernel hashes
page as a zero page.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-24-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As with SEV, an SNP guest requires that the BIOS be part of the initial
encrypted/measured guest payload. Extend sev_encrypt_flash() to handle
the SNP case and plumb through the GPA of the BIOS location since this
is needed for SNP.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-25-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A recent version of OVMF expanded the reset vector GUID list to add
SEV-specific metadata GUID. The SEV metadata describes the reserved
memory regions such as the secrets and CPUID page used during the SEV-SNP
guest launch.
The pc_system_get_ovmf_sev_metadata_ptr() is used to retieve the SEV
metadata pointer from the OVMF GUID list.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-19-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ask the ConfidentialGuestSupport object whether to use guest_memfd
for KVM-backend private memory. This bool can be set in instance_init
(or user_complete) so that it is available when the machine is created.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now QEMU is importing arch/x86/include/uapi/asm/kvm_para.h
because it includes definitions for kvmclock and for KVM CPUID
bits. However, other definitions for KVM hypercall values and return
codes are included in include/uapi/linux/kvm_para.h and they will be
used by SEV-SNP.
To ensure that it is possible to include both <linux/kvm_para.h> and
"standard-headers/asm-x86/kvm_para.h" without conflicts, provide
linux/kvm_para.h as a portable header too, and forward linux-headers/
files to those in include/standard-headers. Note that <linux/kvm_para.h>
will include architecture-specific definitions as well, but
"standard-headers/linux/kvm_para.h" will not because it can be used in
architecture-independent files.
This could easily be extended to other architectures, but right now
they do not need any symbol in their specific kvm_para.h files.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux has <misc/pvpanic.h>, not <linux/pvpanic.h>. Use the same
directory for QEMU's include/standard-headers/ copy.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Align the framebuffer backend with the other legacy ones,
register it via xen_backend_init() when '-vga xenfb' is
used. It is safe because MODULE_INIT_XEN_BACKEND is called
in xen_bus_realize(), long after CLI processing initialized
the vga_interface_type variable.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-8-philmd@linaro.org>
Keep XenDevOps structures in .rodata.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-5-philmd@linaro.org>
XenDevOps @ops is not updated, mark it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-4-philmd@linaro.org>
XenDevOps @ops is not updated, mark it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-3-philmd@linaro.org>
Add xen_mr_is_memory() to abstract away tests for the
xen_memory MR.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240529140739.1387692-4-edgar.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Aside from the round robin threads this is all common code. By
moving the halt_cond setup we also no longer need hacks to work around
the race between QOM object creation and thread creation.
It is a little ugly to free stuff up for the round robin thread but
better it deal with its own specialises than making the other
accelerators jump through hoops.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240530194250.1801701-3-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Make the relationship between CPUState, ArchCPU and cpu_env a bit
clearer in the kdoc comments.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240530194250.1801701-2-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Split out asciidump_line as a separate function, local to hexdump.c,
for use by qemu_hexdump. Use "%-*s" to generate the alignment
between the hex and the ascii, rather than explicit spaces.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240412073346.458116-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Require that the caller output the offset and increment bufptr.
Use QEMU_HEXDUMP_LINE_BYTES in vhost_vdpa_dump_config instead
of raw integer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240412073346.458116-2-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
While netmap implements virtio-net header, it does not implement
receive_raw(). Instead of implementing receive_raw for netmap, add
virtio-net headers in the common code and use receive_iov()/receive()
instead. This also fixes the buffer size for the virtio-net header.
Fixes: fbbdbddec0 ("tap: allow extended virtio header with hash info")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since qemu_set_vnet_hdr_len() is always called when
qemu_using_vnet_hdr() is called, we can merge them and save some code.
For consistency, express that the virtio-net header is not in use by
returning 0 with qemu_get_vnet_hdr_len() instead of having a dedicated
function, qemu_get_using_vnet_hdr().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch adds support for MCQ defined in UFSHCI 4.0. This patch
utilized the legacy I/O codes as much as possible to support MCQ.
MCQ operation & runtime register is placed at 0x1000 offset of UFSHCI
register statically with no spare space among four registers (48B):
UfsMcqSqReg, UfsMcqSqIntReg, UfsMcqCqReg, UfsMcqCqIntReg
The maxinum number of queue is 32 as per spec, and the default
MAC(Multiple Active Commands) are 32 in the device.
Example:
-device ufs,serial=foo,id=ufs0,mcq=true,mcq-maxq=8
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-Id: <20240528023106.856777-3-minwoo.im@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
This patch is a prep patch for the following MCQ support patch for
hw/ufs. This patch updated minimal mandatory fields to support MCQ
based on UFSHCI 4.0.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-Id: <20240528023106.856777-2-minwoo.im@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
The TCGCPUOps::cpu_exec_halt method is called from cpu_handle_halt()
when the CPU is halted, so that a target CPU emulation can do
anything target-specific it needs to do. (At the moment we only use
this on i386.)
The current specification of the method doesn't allow the target
specific code to do something different if the CPU is about to come
out of the halt state, because cpu_handle_halt() only determines this
after the method has returned. (If the method called cpu_has_work()
itself this would introduce a potential race if an interrupt arrived
between the target's method implementation checking and
cpu_handle_halt() repeating the check.)
Change the definition of the method so that it returns a bool to
tell cpu_handle_halt() whether to stay in halt or not.
We will want this for the Arm target, where FEAT_WFxT wants to do
some work only for the case where the CPU is in halt but about to
leave it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-2-peter.maydell@linaro.org
Using -fsanitize=undefined with Clang v18 causes an error if function
pointers are casted:
qapi/qapi-clone-visitor.c:188:5: runtime error: call to function visit_type_SocketAddress through pointer to incorrect function type 'bool (*)(struct Visitor *, const char *, void **, struct Error **)'
/tmp/qemu-ubsan/qapi/qapi-visit-sockets.c:487: note: visit_type_SocketAddress defined here
#0 0x5642aa2f7f3b in qapi_clone qapi/qapi-clone-visitor.c:188:5
#1 0x5642aa2c8ce5 in qio_channel_socket_listen_async io/channel-socket.c:285:18
#2 0x5642aa2b8903 in test_io_channel_setup_async tests/unit/test-io-channel-socket.c:116:5
#3 0x5642aa2b8204 in test_io_channel tests/unit/test-io-channel-socket.c:179:9
#4 0x5642aa2b8129 in test_io_channel_ipv4 tests/unit/test-io-channel-socket.c:323:5
...
It also prevents enabling the strict mode of CFI which is currently
disabled with -fsanitize-cfi-icall-generalize-pointers.
The problematic casts are necessary to pass visit_type_T() and
visit_type_T_members() as callbacks to qapi_clone() and qapi_clone_members(),
respectively. Open-code these two functions to avoid the callbacks, and
thus the type casts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2346
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240524-xkb-v4-3-2de564e5c859@daynix.com>
[thuth: Improve commit message according to Markus' suggestions]
Signed-off-by: Thomas Huth <thuth@redhat.com>
-fsanitize=undefined complains if function pointers are casted. It
also prevents enabling the strict mode of CFI which is currently
disabled with -fsanitize-cfi-icall-generalize-pointers.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2345
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240524-xkb-v4-2-2de564e5c859@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's not used anywhere, so let's simply remove it.
Message-ID: <20240527121351.211266-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a parameter that enables discard-after-copy. That is mostly useful
in "push backup with fleecing" scheme, when source is snapshot-access
format driver node, based on copy-before-write filter snapshot-access
API:
[guest] [snapshot-access] ~~ blockdev-backup ~~> [backup target]
| |
| root | file
v v
[copy-before-write]
| |
| file | target
v v
[active disk] [temp.img]
In this case discard-after-copy does two things:
- discard data in temp.img to save disk space
- avoid further copy-before-write operation in discarded area
Note that we have to declare WRITE permission on source in
copy-before-write filter, for discard to work. Still we can't take it
unconditionally, as it will break normal backup from RO source. So, we
have to add a parameter and pass it thorough bdrv_open flags.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240313152822.626493-5-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Currently block_copy creates copy_bitmap in source node. But that is in
bad relation with .independent_close=true of copy-before-write filter:
source node may be detached and removed before .bdrv_close() handler
called, which should call block_copy_state_free(), which in turn should
remove copy_bitmap.
That's all not ideal: it would be better if internal bitmap of
block-copy object is not attached to any node. But that is not possible
now.
The simplest solution is just create copy_bitmap in filter node, where
anyway two other bitmaps are created.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240313152822.626493-4-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240514105829.729342-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240513141703.549874-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These are no longer used.
tlb_flush_all_cpus: removed by previous commit.
tlb_flush_page_all_cpus: removed by previous commit.
tlb_flush_page_bits_by_mmuidx_all_cpus: never used.
tlb_flush_page_by_mmuidx_all_cpus: never used.
tlb_flush_page_bits_by_mmuidx_all_cpus: never used, thus:
tlb_flush_range_by_mmuidx_all_cpus: never used.
tlb_flush_by_mmuidx_all_cpus: never used.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* target/i386: add control bits support for LAM
* target/i386: tweaks to new translator
* target/i386: add support for LAM in CPUID enumeration
* hw/i386/pc: Support smp.modules for x86 PC machine
* target-i386: hyper-v: Correct kvm_hv_handle_exit return value
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZOMlAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTSwf8DOPgipepNcsxUQoV9nOBfNXqEWa6
DilQGwuu/3eMSPITUCGKVrtLR5azwCwvNfYYErVBPVIhjImnk3XHwfKpH1csadgq
7Np8WGjAyKEIP/yC/K1VwsanFHv3hmC6jfcO3ZnsnlmbHsRINbvU9uMlFuiQkKJG
lP/dSUcTVhwLT6eFr9DVDUnq4Nh7j3saY85pZUoDclobpeRLaEAYrawha1/0uQpc
g7MZYsxT3sg9PIHlM+flpRvJNPz/ZDBdj4raN1xo4q0ET0KRLni6oEOVs5GpTY1R
t4O8a/IYkxeI15K9U7i0HwYI2wVwKZbHgp9XPMYVZFJdKBGT8bnF56pV9A==
=lp7q
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* hw/i386/pc_sysfw: Alias rather than copy isa-bios region
* target/i386: add control bits support for LAM
* target/i386: tweaks to new translator
* target/i386: add support for LAM in CPUID enumeration
* hw/i386/pc: Support smp.modules for x86 PC machine
* target-i386: hyper-v: Correct kvm_hv_handle_exit return value
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZOMlAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTSwf8DOPgipepNcsxUQoV9nOBfNXqEWa6
# DilQGwuu/3eMSPITUCGKVrtLR5azwCwvNfYYErVBPVIhjImnk3XHwfKpH1csadgq
# 7Np8WGjAyKEIP/yC/K1VwsanFHv3hmC6jfcO3ZnsnlmbHsRINbvU9uMlFuiQkKJG
# lP/dSUcTVhwLT6eFr9DVDUnq4Nh7j3saY85pZUoDclobpeRLaEAYrawha1/0uQpc
# g7MZYsxT3sg9PIHlM+flpRvJNPz/ZDBdj4raN1xo4q0ET0KRLni6oEOVs5GpTY1R
# t4O8a/IYkxeI15K9U7i0HwYI2wVwKZbHgp9XPMYVZFJdKBGT8bnF56pV9A==
# =lp7q
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 May 2024 10:58:40 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
target-i386: hyper-v: Correct kvm_hv_handle_exit return value
i386/cpu: Use CPUCacheInfo.share_level to encode CPUID[0x8000001D].EAX[bits 25:14]
i386/cpu: Use CPUCacheInfo.share_level to encode CPUID[4]
i386: Add cache topology info in CPUCacheInfo
hw/i386/pc: Support smp.modules for x86 PC machine
tests: Add test case of APIC ID for module level parsing
i386/cpu: Introduce module-id to X86CPU
i386: Support module_id in X86CPUTopoIDs
i386: Expose module level in CPUID[0x1F]
i386: Support modules_per_die in X86CPUTopoInfo
i386: Introduce module level cpu topology to CPUX86State
i386/cpu: Decouple CPUID[0x1F] subleaf with specific topology level
i386: Split topology types of CPUID[0x1F] from the definitions of CPUID[0xB]
i386/cpu: Introduce bitmap to cache available CPU topology levels
i386/cpu: Consolidate the use of topo_info in cpu_x86_cpuid()
i386/cpu: Use APIC ID info get NumSharingCache for CPUID[0x8000001D].EAX[bits 25:14]
i386/cpu: Use APIC ID info to encode cache topo in CPUID[4]
i386/cpu: Fix i/d-cache topology to core level for Intel CPU
target/i386: add control bits support for LAM
target/i386: add support for LAM in CPUID enumeration
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prelude to supporting TCG_COND_TST* in vector comparisons.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Li Zhijian's COLO minor fixes
- Marc-André's virtio-gpu fix
- Fiona's virtio-net USO fix
- A couple of migration-test fixes from Thomas
-----BEGIN PGP SIGNATURE-----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=DDrh
-----END PGP SIGNATURE-----
Merge tag 'migration-20240522-pull-request' of https://gitlab.com/farosas/qemu into staging
Migration pull request
- Li Zhijian's COLO minor fixes
- Marc-André's virtio-gpu fix
- Fiona's virtio-net USO fix
- A couple of migration-test fixes from Thomas
# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmZObggQHGZhcm9zYXNA
# c3VzZS5kZQAKCRDHmNx0G+wxnWE8D/49RGE+g29qyk9aKx3lU8mSq+ZzmX5GncBt
# 5+Mx5qoHDsBCQTE+dQpEVIoeMJ2HIbgbOML4qsnp6Hw/4/TWkfwC/R6+ZmHBevRk
# fVLkVh2JMHVg8Tq+0FO1X1QnMU03uJ7EAuWdDa8HqlJ5dQY/K3gDaku8oQBXk96X
# 13pChSbMob76tdb+wiwbdEakabigH7XfrPdI6lzI8MCGTIcPKc/UKTFYuoj/OsNx
# raqy+uBtvKtfHxiaYnIgHIPNAF/1f4tP3iAOcPoZWIMXWxFkE8+ANDJAbWo6xIcL
# DGg/wEzZO/OnXLjOhjvLBUHK/fx4wQ5bsqA09BVxoRyBGblkXr+bcwBLYjgiEqzT
# aniPiAx5W/Db+T7HqZPIWesFYj3cmcwvYUTrx/RPMdC0epG+ZczDMtescHdZbxvt
# Pjs3nFeCLhyYcVhlTI72eXRCxdd/26+r6/OmrBC2+GaZrybM61TvNo+3XvO0Pfhi
# UmwF2EN27XmSMelLvH/MnflUVgBHKDs3CCQzDlxreHq2jMVR0SL7LU5wMJJ58Iok
# M3u74izQM25bwYxiASH+4iRn0puH1mOwgOx28W0uiQfZY/678/lCnwa1Tul15BRE
# fIQZJhyIGzhSpwLqEXmdXdlLQs1isqIgpd/mzKgZ285nLr7kz+4gxCUqiXgVbrl7
# P45Dym1u4g==
# =DDrh
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 May 2024 03:13:28 PM PDT
# gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D
# gpg: issuer "farosas@suse.de"
# gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown]
# gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D
* tag 'migration-20240522-pull-request' of https://gitlab.com/farosas/qemu:
tests/qtest/migration-test: Fix the check for a successful run of analyze-migration.py
tests/qtest/migration-test: Run some basic tests on s390x and ppc64 with TCG, too
hw/core/machine: move compatibility flags for VirtIO-net USO to machine 8.1
virtio-gpu: fix v2 migration
migration: fix a typo
migration: add "exists" info to load-state-field trace
migration/colo: Tidy up bql_unlock() around bdrv_activate_all()
migration/colo: make colo_incoming_co() return void
migration/colo: Minor fix for colo error message
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit dfcf74fa ("virtio-gpu: fix scanout migration post-load") broke
forward/backward version migration. Versioning of nested VMSD structures
is not straightforward, as the wire format doesn't have nested
structures versions. Introduce x-scanout-vmstate-version and a field
test to save/load appropriately according to the machine version.
Fixes: dfcf74fa ("virtio-gpu: fix scanout migration post-load")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
[fixed long lines]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Currently, it always returns 0, no need to check the return value at all.
In addition, enter colo coroutine only if migration_incoming_colo_enabled()
is true.
Once the destination side enters the COLO* state, the COLO process will
take over the remaining processes until COLO exits.
Cc: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
[fixed mangled author email address]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add module_id member in X86CPUTopoIDs.
module_id can be parsed from APIC ID, so also update APIC ID parsing
rule to support module level. With this support, the conversions with
module level between X86CPUTopoIDs, X86CPUTopoInfo and APIC ID are
completed.
module_id can be also generated from cpu topology, and before i386
supports "modules" in smp, the default "modules per die" (modules *
clusters) is only 1, thus the module_id generated in this way is 0,
so that it will not conflict with the module_id generated by APIC ID.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Co-developed-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-16-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux kernel (from v6.4, with commit edc0a2b595765 ("x86/topology: Fix
erroneous smp_num_siblings on Intel Hybrid platforms") is able to
handle platforms with Module level enumerated via CPUID.1F.
Expose the module level in CPUID[0x1F] if the machine has more than 1
modules.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-15-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support module level in i386 cpu topology structure "X86CPUTopoInfo".
Since x86 does not yet support the "modules" parameter in "-smp",
X86CPUTopoInfo.modules_per_die is currently always 1.
Therefore, the module level width in APIC ID, which can be calculated by
"apicid_bitwidth_for_count(topo_info->modules_per_die)", is always 0 for
now, so we can directly add APIC ID related helpers to support module
level parsing.
In addition, update topology structure in test-x86-topo.c.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Co-developed-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-14-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, QEMU checks the specify number of topology domains to detect
if there's extended topology levels (e.g., checking nr_dies).
With this bitmap, the extended CPU topology (the levels other than SMT,
core and package) could be easier to detect without touching the
topology details.
This is also in preparation for the follow-up to decouple CPUID[0x1F]
subleaf with specific topology level.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20240424154929.1487382-10-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the -bios case the "isa-bios" memory region is an alias to the BIOS mapped
to the top of the 4G memory boundary. Do the same in the -pflash case, but only
for new machine versions for migration compatibility. This establishes common
behavior and makes pflash commands work in the "isa-bios" region which some
real-world legacy bioses rely on.
Note that in the sev_enabled() case, the "isa-bios" memory region in the -pflash
case will now also point to encrypted memory, just like it already does in the
-bios case.
When running `info mtree` before and after this commit with
`qemu-system-x86_64 -S -drive \
if=pflash,format=raw,readonly=on,file=/usr/share/qemu/bios-256k.bin` and running
`diff -u before.mtree after.mtree` results in the following changes in the
memory tree:
--- before.mtree
+++ after.mtree
@@ -71,7 +71,7 @@
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
- 00000000000e0000-00000000000fffff (prio 1, rom): isa-bios
+ 00000000000e0000-00000000000fffff (prio 1, romd): alias isa-bios @system.flash0 0000000000020000-000000000003ffff
00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
@@ -108,7 +108,7 @@
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
- 00000000000e0000-00000000000fffff (prio 1, rom): isa-bios
+ 00000000000e0000-00000000000fffff (prio 1, romd): alias isa-bios @system.flash0 0000000000020000-000000000003ffff
00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
@@ -131,11 +131,14 @@
memory-region: pc.ram
0000000000000000-0000000007ffffff (prio 0, ram): pc.ram
+memory-region: system.flash0
+ 00000000fffc0000-00000000ffffffff (prio 0, romd): system.flash0
+
memory-region: pci
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
- 00000000000e0000-00000000000fffff (prio 1, rom): isa-bios
+ 00000000000e0000-00000000000fffff (prio 1, romd): alias isa-bios @system.flash0 0000000000020000-000000000003ffff
memory-region: smram
00000000000a0000-00000000000bffff (prio 0, ram): alias smram-low @pc.ram 00000000000a0000-00000000000bffff
Note that in both cases the "system" memory region contains the entry
00000000fffc0000-00000000ffffffff (prio 0, romd): system.flash0
but the "system.flash0" memory region only appears standalone when "isa-bios" is
an alias.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240508175507.22270-7-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is to follow the coding standand in qapi/error.h to return bool
for bool-valued functions.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This is to follow the coding standand in qapi/error.h to return bool
for bool-valued functions.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
The changed functions include:
iommufd_backend_connect
iommufd_backend_alloc_ioas
By this chance, simplify the functions a bit by avoiding duplicate
recordings, e.g., log through either error interface or trace, not
both.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Make VFIOIOMMUClass::add_window() and its wrapper function
vfio_container_add_section_window() return bool.
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Make VFIOIOMMUClass::attach_device() and its wrapper function
vfio_attach_device() return bool.
This is to follow the coding standand to return bool if 'Error **'
is used to pass error.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Emit VFIO migration QAPI event when a VFIO device changes its migration
state. This can be used by management applications to get updates on the
current state of the VFIO device for their own purposes.
A new per VFIO device capability, "migration-events", is added so events
can be enabled only for the required devices. It is disabled by default.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Let the callers do the error reporting. Add documentation while at it.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>