The add2 code in the tcg_out_addsub2 function doesn't take into account
the case where rl == al == bl. In that case we can't compute the carry
after the addition. As it corresponds to a multiplication by 2, the
carry bit is the bit 31.
While this is a corner case, this prevents x86-64 guests to boot on a
MIPS host.
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 2b7ec66f fixed TCGMemOp masking following the MO_AMASK addition,
but two cases were forgotten in the TCG MIPS backend.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For 32-bit guest, we load a 32-bit address from the TLB, so there is no
need to compensate for the low or high part. This fixes 32-bit guests on
big-endian hosts.
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 3972ef6f83 ("tcg: Push merged memop+mmu_idx parameter to
softmmu routines") caused the following build errors when building TCG
for MIPS:
In file included from tcg/tcg.c:258:0:
tcg/mips/tcg-target.c In function ‘tcg_out_qemu_ld_slow_path’:
tcg/mips/tcg-target.c:1015:22: error: ‘lb’ undeclared (first use in this function)
tcg/mips/tcg-target.c In function ‘tcg_out_qemu_st_slow_path’:
tcg/mips/tcg-target.c:1058:22: error: ‘lb’ undeclared (first use in this function)
It looks like lb was meant to refer to the TCGLabelQemuLdst *l
parameter, so fix both references to lb to refer to just l.
Fixes: 3972ef6f83 ("tcg: Push merged memop+mmu_idx parameter to softmmu routines")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Message-id: 1436433435-24898-2-git-send-email-james.hogan@imgtec.com
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The addition of MO_AMASK means that places that used inverted masks
need to be changed to use positive masks, and places that failed to
mask the intended bits need updating.
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Tested-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This will be used to size the TLB when more than 8 MMU modes are
used by the target. Limitations come from the limited size of
the immediate fields (which sometimes, as in the case of Aarch64,
extend to instructions that shift the immediate).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The extra information is not yet used but it is now available.
This requires minor changes through all of the tcg backends.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
At the tcg opcode level, not at the tcg-op.h generator level.
This requires minor changes through all of the tcg backends,
but none of the cpu translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is less about improved type checking than enabling a
subsequent change to the representation of labels.
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Commit 9d8bf2d1 moved the softmmu slow path out of line and introduce a
regression at the same time by always calling tcg_out_tlb_load with
is_load=1. This makes impossible to run any significant code under
qemu-system-mips*.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since all backends have been converted, remove the compatibility code.
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Now that the code_gen_buffer is constrained to not cross 256mb
regions, we are assured that we can use J to reach another TB.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use the same table to fold comparisons as with setcond.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Emitting a single branch instead of (up to) 3, using setcond2
to generate the composite compare.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The original code results in one too many insns per zero
present in the input. And since comparing 64-bit numbers
vs zero is common...
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Using tcg_unsigned_cond and tcg_high_cond.
Also, move the function up in the file for future cleanups.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use the same table to fold comparisons as with setcond.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use a table to fold comparisons to less-than.
Also, move the function up in the file for futher simplifications.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Most opcodes fall in to one of a couple of patterns.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since we must use ADDUI, we would generate incorrect code for -32768.
Leaving off subtract of +32768 makes things easier for a follow-on patch.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
At the same time, tidy deposit by introducing tcg_out_opc_bf.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
T0 is an argument register for the n32 and n64 abis. T9 is the call
address register for the abis, and is more directly under the control
of the backend.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use these instead of hard-coding the registers to use for temporaries.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use FP (also known as S8) as a normal call-saved register.
Include T0 in the allocation order and call-clobbered list
even though it's currently used as a TCG temporary.
Put the argument registers at the end of the allocation order.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In addition, fill delay slots calling the helpers and tail
call to the store helpers.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
At the same time, tidy up the call helpers, avoiding a memory reference.
Split out several subroutines. Use TCGMemOp constants. Make endianness
selectable at runtime.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For userland builds calls will normally be in range,
and for the exit_tb opcode the branch to the epilogue.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The INDEX_op_call case has just been obsoleted; the mov and movi
cases have not been reachable for years. Attempt to document this
both in each tcg_out_op switch, and via TCG_OPF_NOT_PRESENT.
Because of the TCG_OPF_NOT_PRESENT change, this must be done for
all targets in a single commit.
Signed-off-by: Richard Henderson <rth@twiddle.net>
And use tcg pointer differencing functions as appropriate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Instead require either mulu2_i32 or muluh_i32. The code in tcg-op.h
already supports looking for both. Previous incomplete conversion?
Signed-off-by: Richard Henderson <rth@twiddle.net>
Most 64-bit targets need to be able to ignore the high bits
of a TCG_TYPE_I32 value.
Suggested-by: Stuart Brady <sdb@zubnet.me.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Step two in the transition, adding the new ldst opcodes. Keep the old
opcodes around until all backends support the new opcodes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is a no-op backend data implementation, for those targets that
are not currently using the load/store optimization path.
This is prepatory to always requiring these functions in all backends.
Signed-off-by: Richard Henderson <rth@twiddle.net>
* 'tcg-next' of git://github.com/rth7680/qemu: (29 commits)
tcg-i386: Make use of zero-extended memory helper routines
tcg: Introduce zero and sign-extended versions of load helpers
exec: Split softmmu_defs.h
target: Include softmmu_exec.h where forgotten
exec: Rename USUFFIX to LSUFFIX
tcg-i386: Don't perform GETPC adjustment in TCG code
exec: Reorganize the GETRA/GETPC macros
configure: Allow x32 as a host
tcg-i386: Adjust tcg_out_tlb_load for x32
tcg-i386: Use intptr_t appropriately
tcg: Fix jit debug for x32
tcg: Use appropriate types in tcg_reg_alloc_call
tcg: Change tcg_out_ld/st offset to intptr_t
tcg: Change tcg_gen_exit_tb argument to uintptr_t
tcg: Use uintptr_t in TCGHelperInfo
tcg: Change relocation offsets to intptr_t
tcg: Change memory offsets to intptr_t
tcg: Change frame pointer offsets to intptr_t
tcg: Define TCG_ptr properly
tcg: Define TCG_TYPE_PTR properly
...
On MIPS ext8s and ext16s ops are implemented with a dedicated
instruction only on MIPS32R2, otherwise the same kind of implementation
than at TCG level (shift left followed by shift right) is used.
Change that by only implementing the ext8s and ext16s ops on MIPS32R2 so
that optimizations can be done by the optimizer. Use an inline version to
avoid having to test again for MIPS32R2 instructions. Keep the shift
implementation for the ld/st routines.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use an inline version for the bswap16 and bswap32 ops to avoid
testing for MIPS32R2 instructions availability, as these ops are
only available in that case.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that TCG supports enabling and disabling ops at runtime, it's
possible to detect the available host instructions at runtime, and
enable the corresponding ops accordingly.
Unfortunately it's not easy to probe for available instructions on
MIPS, the information is partially available in /proc/cpuinfo, and
not available in AUXV. This patch therefore probes for the instructions
by trying to execute them and by catching a possible SIGILL signal.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The _cmmu helpers can be moved to exec-all.h. The helpers that are
used from TCG will shortly need access to tcg_target_long so move
their declarations into tcg.h.
This requires minor include adjustments to all TCG backends.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
With the optimization in tcg_liveness_analysis,
we can avoid the MFLO when it is unused.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use them in places where mulu2 and muls2 are used.
Optimize mulx2 with dead low part to mulxh.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
tcg/mips/tcg-target.h defines various operations conditionally depending
upon the isa revision, however these operations are included in
mips_op_defs[] unconditionally resulting in the following runtime errors
if CONFIG_DEBUG_TCG is defined:
Invalid op definition for movcond_i32
Invalid op definition for rotl_i32
Invalid op definition for rotr_i32
Invalid op definition for deposit_i32
Invalid op definition for bswap16_i32
Invalid op definition for bswap32_i32
tcg/tcg.c:1196: tcg fatal error
Fix with ifdefs like the i386 backend does for movcond_i32.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There are several hosts with only a "div" insn. Remainder is computed
manually from the quotient and inputs. We can do this generically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
MIPS32 and later instruction sets have a multiplication instruction
directly operating on GPRs. It only produces a 32-bit result but
it is exactly what is needed by QEMU.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
GUEST_BASE support is now supported by all TCG backends, and is
now mandatory. Drop the now-pointless TCG_TARGET_HAS_GUEST_BASE
define (set by every backend) and the error if it is unset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The TCG jmp operation doesn't really make sense in the QEMU context, it
is unused, it is not implemented by some targets, and it is wrongly
implemented by some others.
This patch simply removes it.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Stefan Weil<sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the MIPS32(R2) cpu detection so that it also works with
-march=octeon. Thanks to Andrew Pinski for the hint.
Cc: Andrew Pinski <apinski@cavium.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The TCG targets no longer need individual implementations.
Since commit 6a18ae2d29,
'flags' is no longer used in tcg_target_get_call_iarg_regs_count.
The remaining tcg_target_get_call_iarg_regs_count is trivial and only
called once. Therefore the patch eliminates it completely.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
movcond operation can be implemented on MIPS32 Release 2 using the MOVN,
MOVZ, SLT and SLTU instructions.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
deposit operations can be optimized on MIPS32 Release 2 using the INS
instruction.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
rotr operations can be optimized on MIPS32 Release 2 using the ROTR and
ROTRV instructions. Also implemented rotl operations by subtracting the
shift from 32.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
bswap operations can be optimized on MIPS32 Release 2 using the ROTR,
WSBH and SEH instructions. We can't use the non-R2 code to implement the
ops due to registers constraints, so don't define the corresponding
TCG_TARGET_HAS_bswap* values.
Also bswap16* operations are supposed to be called with the 16 high bits
zeroed. This is the case everywhere (including for TCG by definition)
except when called from the store helper. Remove the AND instructions from
bswap16* and move it there.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
MIPS has some conditional branch instructions when comparing with zero.
Use them.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use stack instead of temp_buf array in CPUState for TCG
temps.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of int, use the correct TCGArg and TCGReg type: TCGReg when
representing a TCG target register, TCGArg when representing the latter
or a constant.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Recent versions of GCC emit warnings when compiling user mode targets.
Kill them by reordering a bit the #ifdef.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The 'Z' constraint has been introduced to map the zero register. However
when the op also accept a constant, there is no point to accept the zero
register in addition.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implemented with setcond if the target does not provide
the optional opcode.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The CONFIG_TCG_PASS_AREG0 code for calling ld/st helpers was
broken in that it did not respect the ABI requirement that 64
bit values were passed in even-odd register pairs. The simplest
way to fix this is to implement some new utility functions
for marshalling function arguments into the correct registers
and stack, so that the code which sets up the address and
data arguments does not need to care whether there has been
a preceding env argument.
Based on commit 9716ef3b for ARM by Peter Maydell.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Optionally, make memory access helpers take a parameter for CPUState
instead of relying on global env.
On most targets, perform simple moves to reorder registers. On i386,
switch from regparm(3) calling convention to standard stack-based
version.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
The TCG targets i386 and tci needed a change of the function
prototype for w64.
This change is currently not needed for the other TCG targets,
but it can be applied to avoid code differences.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Including tcg_out_ld, tcg_out_st, tcg_out_mov, tcg_out_movi.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Most targets did not name the enum; tci used TCGRegister.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
It is now declared for all tcg targets in tcg.h,
so the tcg target specific declarations are redundant.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
By always defining these symbols, we can eliminate a lot of ifdefs.
To allow this to be checked reliably, the semantics of the
TCG_TARGET_HAS_* macros must be changed from def/undef to true/false.
This allows even more ifdefs to be removed, converting them into
C if statements.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cppcheck reports an error:
qemu/tcg/mips/tcg-target.c:1487: error: Invalid number of character (()
The unpatched code won't compile on mips hosts starting with commit
cea5f9a28f.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make functions take a parameter for CPUState instead of relying
on global env. Pass CPUState pointer to TCG prologue, which moves
it to AREG0.
Thanks to Peter Maydell and Laurent Desnogues for the ARM prologue
change.
Revert the hacks to avoid AREG0 use on Sparc hosts.
Move cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h.
Compile the file without HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD
to fix compilation of the MIPS host support for OpenBSD/mips64 based architecures.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a comment about cache coherency and retranslation, so that people
developping new targets based on existing ones are warned of the issue.
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
TCG on MIPS was trying to avoid changing the branch offset, but didn't
due to a stupid typo. Fix it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Both tcg_target_init and tcg_target_qemu_prologue
are unused outside of tcg.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Mirror tcg_out_movi in having a TYPE parameter. This allows x86_64
to perform the move at the proper width, which may elide a REX prefix.
Introduce a TCG_TYPE_REG enumerator to represent the "native width"
of the host register, and to distinguish the usage from "pointer data"
as represented by the existing TCG_TYPE_PTR.
Update all targets to match.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Register fp (frame pointer) is a bad choice for compilations
without optimisation, because the compiler makes heavy use
of this register (so the resulting code crashes).
Register s0 had been used for TCG_AREG1 in earlier releases,
but was no longer used and is now free for TCG_AREG0.
The resulting code works for compilations without
optimisation (tested with qemu mips in qemu mips
on x86 host).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Historically the qemu tlb "addend" field was used for both RAM and IO accesses,
so needed to be able to hold both host addresses (unsigned long) and guest
physical addresses (target_phys_addr_t). However since the introduction of
the iotlb field it has only been used for RAM accesses.
This means we can change the type of addend to unsigned long, and remove
associated hacks in the big-endian TCG backends.
We can also remove the host dependence from target_phys_addr_t.
Signed-off-by: Paul Brook <paul@codesourcery.com>
