Commit Graph

75750 Commits

Author SHA1 Message Date
Niek Linnenbank
0553ef4257 docs: add Orange Pi PC document
The Xunlong Orange Pi PC machine is a functional ARM machine
based on the Allwinner H3 System-on-Chip. It supports mainline
Linux, U-Boot, NetBSD and is covered by acceptance tests.

This commit adds a documentation text file with a description
of the machine and instructions for the user.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-19-nieklinnenbank@gmail.com
[PMM: moved file into docs/system/arm to match the reorg
of the arm target part of the docs; tweaked heading to
match other boards]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Philippe Mathieu-Daudé
921589fb72 tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi PC
This test boots U-Boot then NetBSD (stored on a SD card) on
a OrangePi PC board.

As it requires ~1.3GB of storage, it is disabled by default.

U-Boot is built by the Debian project [1], and the SD card image
is provided by the NetBSD organization [2].

Once the compressed SD card image is downloaded (304MB) and
extracted, this test is fast:

  $ AVOCADO_ALLOW_LARGE_STORAGE=yes \
    avocado --show=app,console run -t machine:orangepi-pc \
      tests/acceptance/boot_linux_console.py
  console: U-Boot SPL 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000)
  console: DRAM: 1024 MiB
  console: U-Boot 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000) Allwinner Technology
  console: CPU:   Allwinner H3 (SUN8I 0000)
  console: scanning bus usb@1c1b000 for devices... 1 USB Device(s) found
  console: scanning bus usb@1c1d000 for devices... 1 USB Device(s) found
  console: scanning usb for storage devices... 0 Storage Device(s) found
  console: Hit any key to stop autoboot:  0
  console: => setenv bootargs root=ld0a
  console: => setenv kernel netbsd-GENERIC.ub
  console: => setenv fdtfile dtb/sun8i-h3-orangepi-pc.dtb
  console: => boot
  console: ## Booting kernel from Legacy Image at 42000000 ...
  console: Image Name:   NetBSD/earmv7hf 9.0_RC1
  console: Image Type:   ARM Linux Kernel Image (no loading done) (uncompressed)
  console: XIP Kernel Image (no loading done)
  console: Loading Device Tree to 49ff6000, end 49fffe01 ... OK
  console: Starting kernel ...
  console: [   1.0000000] NetBSD/evbarm (fdt) booting ...
  console: [   1.0000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
  console: [   1.0000000]         mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/evbarm/compile/GENERIC
  console: [   1.0000000] total memory = 1024 MB
  console: [   1.0000000] avail memory = 1003 MB
  console: [   1.0000000] armfdt0 (root)
  console: [   1.0000000] simplebus0 at armfdt0: Xunlong Orange Pi PC
  console: [   1.0000000] cpu0 at cpus0: Cortex-A7 r0p5 (Cortex V7A core)
  console: [   1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
  console: [   1.0000000] cpu0: 32KB/64B 2-way L1 VIPT Instruction cache
  console: [   1.0000000] cpu0: 32KB/64B 2-way write-back-locking-C L1 PIPT Data cache
  console: [   1.0000000] cpu0: 2304KB/64B 16-way write-through L2 PIPT Unified cache
  console: [   1.0000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
  ...
  console: [   2.3812082] sdmmc0: SD card status: 4-bit, C0
  console: [   2.3812082] ld0 at sdmmc0: <0xaa:0x5859:QEMU!:0x01:0xdeadbeef:0x062>
  console: [   2.4012856] ld0: 1226 MB, 622 cyl, 64 head, 63 sec, 512 bytes/sect x 2511872 sectors
  console: [   2.5321222] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
  console: [   3.1068718] WARNING: 4 errors while detecting hardware; check system log.
  console: [   3.1179868] boot device: ld0
  console: [   3.1470623] root on ld0a dumps on ld0b
  console: [   3.2464436] root file system type: ffs
  console: [   3.2897123] kern.module.path=/stand/evbarm/9.0/modules
  console: Mon Feb 17 20:33:35 UTC 2020
  console: Starting root file system check:
  PASS (35.96 s)
  RESULTS    : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
  JOB TIME   : 36.09 s

Note, this test only took ~65 seconds to run on Travis-CI, see: [3].

This test is based on a description from Niek Linnenbank from [4].

[1] https://wiki.debian.org/InstallingDebianOn/Allwinner#Creating_a_bootable_SD_Card_with_u-boot
[2] https://wiki.netbsd.org/ports/evbarm/allwinner/
[3] https://travis-ci.org/philmd/qemu/jobs/638823612#L3778
[4] https://www.mail-archive.com/qemu-devel@nongnu.org/msg669347.html

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-18-nieklinnenbank@gmail.com
[NL: changed test to use NetBSD 9.0 final release and -global allwinner-rtc.base-year]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Philippe Mathieu-Daudé
784b879638 tests/boot_linux_console: Add a SLOW test booting Ubuntu on OrangePi PC
This test boots Ubuntu Bionic on a OrangePi PC board.

As it requires 1GB of storage, and is slow, this test is disabled
on automatic CI testing.

It is useful for workstation testing. Currently Avocado timeouts too
quickly, so we can't run userland commands.

The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/

The Ubuntu image is downloaded from:
https://dl.armbian.com/orangepipc/Bionic_current

This test can be run using:

  $ AVOCADO_ALLOW_LARGE_STORAGE=yes \
    avocado --show=app,console run -t machine:orangepi-pc \
      tests/acceptance/boot_linux_console.py
  console: U-Boot SPL 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100)
  console: DRAM: 1024 MiB
  console: Failed to set core voltage! Can't set CPU frequency
  console: Trying to boot from MMC1
  console: U-Boot 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100) Allwinner Technology
  console: CPU:   Allwinner H3 (SUN8I 0000)
  console: Model: Xunlong Orange Pi PC
  console: DRAM:  1 GiB
  console: MMC:   mmc@1c0f000: 0
  [...]
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 5.3.9-sunxi (root@builder) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #19.11.3 SMP Mon Nov 18 18:49:43 CET 2019
  console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
  console: CPU: div instructions available: patching division code
  console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  console: OF: fdt: Machine model: Xunlong Orange Pi PC
  [...]
  console: EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  console: done.
  console: Begin: Running /scripts/local-bottom ... done.
  console: Begin: Running /scripts/init-bottom ... done.
  console: systemd[1]: systemd 237 running in system mode. (...)
  console: systemd[1]: Detected architecture arm.
  console: Welcome to Ubuntu 18.04.3 LTS!
  console: systemd[1]: Set hostname to <orangepipc>.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-17-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
[NL: changed test to boot from SD card via BootROM, added check for 7z]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Philippe Mathieu-Daudé
de2749bcb2 tests/boot_linux_console: Add a SD card test for the OrangePi PC board
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/

The SD image is from the kernelci.org project:
https://kernelci.org/faq/#the-code

If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.

Alternatively, this test can be run using:

  $ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
  [...]
  console: sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  console: sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2
  console: sunxi-mmc 1c0f000.mmc: Got CD GPIO
  console: ledtrig-cpu: registered to indicate activity on CPUs
  console: hidraw: raw HID events driver (C) Jiri Kosina
  console: usbcore: registered new interface driver usbhid
  console: usbhid: USB HID core driver
  console: Initializing XFRM netlink socket
  console: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
  console: NET: Registered protocol family 10
  console: mmc0: host does not support reading read-only switch, assuming write-enable
  console: mmc0: Problem switching card into high-speed mode!
  console: mmc0: new SD card at address 4567
  console: mmcblk0: mmc0:4567 QEMU! 60.0 MiB
  [...]
  console: EXT4-fs (mmcblk0): mounting ext2 file system using the ext4 subsystem
  console: EXT4-fs (mmcblk0): mounted filesystem without journal. Opts: (null)
  console: VFS: Mounted root (ext2 filesystem) on device 179:0.
  console: Run /sbin/init as init process
  console: EXT4-fs (mmcblk0): re-mounted. Opts: block_validity,barrier,user_xattr,acl
  console: Starting syslogd: OK
  console: Starting klogd: OK
  console: Populating /dev using udev: udevd[203]: starting version 3.2.7
  console: /bin/sh: can't access tty; job control turned off
  console: cat /proc/partitions
  console: / # cat /proc/partitions
  console: major minor  #blocks  name
  console: 1        0       4096 ram0
  console: 1        1       4096 ram1
  console: 1        2       4096 ram2
  console: 1        3       4096 ram3
  console: 179        0      61440 mmcblk0
  console: reboot
  console: / # reboot
  console: umount: devtmpfs busy - remounted read-only
  console: EXT4-fs (mmcblk0): re-mounted. Opts: (null)
  console: The system is going down NOW!
  console: Sent SIGTERM to all processes
  console: Sent SIGKILL to all processes
  console: Requesting system reboot
  console: reboot: Restarting system
  JOB TIME   : 68.64 s

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-16-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
[NL: extend test with ethernet device checks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Philippe Mathieu-Daudé
c40b1ded0a tests/boot_linux_console: Add initrd test for the Orange Pi PC board
This test boots a Linux kernel on a OrangePi PC board and verify
the serial output is working.

The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/

The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test

If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.

Alternatively, this test can be run using:

  $ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
  console: CPU: div instructions available: patching division code
  console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  console: OF: fdt: Machine model: Xunlong Orange Pi PC
  [...]
  console: Trying to unpack rootfs image as initramfs...
  console: Freeing initrd memory: 3256K
  console: Freeing unused kernel memory: 1024K
  console: Run /init as init process
  console: mount: mounting devtmpfs on /dev failed: Device or resource busy
  console: Starting logging: OK
  console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read)
  console: done.
  console: Starting network: OK
  console: Found console ttyS0
  console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  console: Boot successful.
  console: cat /proc/cpuinfo
  console: / # cat /proc/cpuinfo
  console: processor      : 0
  console: model name     : ARMv7 Processor rev 5 (v7l)
  console: BogoMIPS       : 125.00
  console: Features       : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
  console: CPU implementer        : 0x41
  console: CPU architecture: 7
  console: CPU variant    : 0x0
  console: CPU part       : 0xc07
  console: CPU revision   : 5
  [...]
  console: processor      : 3
  console: model name     : ARMv7 Processor rev 5 (v7l)
  console: BogoMIPS       : 125.00
  console: Features       : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
  console: CPU implementer        : 0x41
  console: CPU architecture: 7
  console: CPU variant    : 0x0
  console: CPU part       : 0xc07
  console: CPU revision   : 5
  console: Hardware       : Allwinner sun8i Family
  console: Revision       : 0000
  console: Serial         : 0000000000000000
  console: cat /proc/iomem
  console: / # cat /proc/iomem
  console: 01000000-010fffff : clock@1000000
  console: 01c00000-01c00fff : system-control@1c00000
  console: 01c02000-01c02fff : dma-controller@1c02000
  [...]
  console: reboot
  console: / # reboot
  console: / # Found console ttyS0
  console: Stopping network: OK
  console: hrtimer: interrupt took 21852064 ns
  console: Saving random seed... random: dd: uninitialized urandom read (512 bytes read)
  console: done.
  console: Stopping logging: OK
  console: umount: devtmpfs busy - remounted read-only
  console: umount: can't unmount /: Invalid argument
  console: The system is going down NOW!
  console: Sent SIGTERM to all processes
  console: Sent SIGKILL to all processes
  console: Requesting system reboot
  console: reboot: Restarting system
  PASS (48.32 s)
  JOB TIME   : 49.16 s

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-15-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Philippe Mathieu-Daudé
5abe9f0baa tests/boot_linux_console: Add a quick test for the OrangePi PC board
This test boots a Linux kernel on a OrangePi PC board and verify
the serial output is working.

The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/

If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.

Alternatively, this test can be run using:

  $ make check-venv
  $ ./tests/venv/bin/avocado --show=console,app run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
  JOB ID     : 2e4d15eceb13c33672af406f08171e6e9de1414a
  JOB LOG    : ~/job-results/job-2019-12-17T05.46-2e4d15e/job.log
  (1/1) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi:
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
  console: CPU: div instructions available: patching division code
  console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  console: OF: fdt: Machine model: Xunlong Orange Pi PC
  console: Memory policy: Data cache writealloc
  console: OF: reserved mem: failed to allocate memory for node 'cma@4a000000'
  console: cma: Failed to reserve 128 MiB
  console: psci: probing for conduit method from DT.
  console: psci: PSCIv0.2 detected in firmware.
  console: psci: Using standard PSCI v0.2 function IDs
  console: psci: Trusted OS migration not required
  console: random: get_random_bytes called from start_kernel+0x8d/0x3c2 with crng_init=0
  console: percpu: Embedded 18 pages/cpu @(ptrval) s41228 r8192 d24308 u73728
  console: Built 1 zonelists, mobility grouping on.  Total pages: 32480
  console: Kernel command line: printk.time=0 console=ttyS0,115200
  PASS (8.59 s)
  JOB TIME   : 8.81 s

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-14-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
a9ad9e73a7 hw/arm/allwinner: add RTC device support
Allwinner System-on-Chips usually contain a Real Time Clock (RTC)
for non-volatile system date and time keeping. This commit adds a generic
Allwinner RTC device that supports the RTC devices found in Allwinner SoC
family sun4i (A10), sun7i (A20) and sun6i and newer (A31, H2+, H3, etc).
The following RTC functionality and features are implemented:

 * Year-Month-Day read/write
 * Hour-Minute-Second read/write
 * General Purpose storage

The following boards are extended with the RTC device:

 * Cubieboard (hw/arm/cubieboard.c)
 * Orange Pi PC (hw/arm/orangepi.c)

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-13-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
b71d0385e9 hw/arm/allwinner-h3: add SDRAM controller device
In the Allwinner H3 SoC the SDRAM controller is responsible
for interfacing with the external Synchronous Dynamic Random
Access Memory (SDRAM). Types of memory that the SDRAM controller
supports are DDR2/DDR3 and capacities of up to 2GiB. This commit
adds emulation support of the Allwinner H3 SDRAM controller.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-12-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
a80beb160d hw/arm/allwinner-h3: add Boot ROM support
A real Allwinner H3 SoC contains a Boot ROM which is the
first code that runs right after the SoC is powered on.
The Boot ROM is responsible for loading user code (e.g. a bootloader)
from any of the supported external devices and writing the downloaded
code to internal SRAM. After loading the SoC begins executing the code
written to SRAM.

This commits adds emulation of the Boot ROM firmware setup functionality
by loading user code from SD card in the A1 SRAM. While the A1 SRAM is
64KiB, we limit the size to 32KiB because the real H3 Boot ROM also rejects
sizes larger than 32KiB. For reference, this behaviour is documented
by the Linux Sunxi project wiki at:

  https://linux-sunxi.org/BROM#U-Boot_SPL_limitations

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-11-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
29d08975d1 hw/arm/allwinner-h3: add EMAC ethernet device
The Allwinner Sun8i System on Chip family includes an Ethernet MAC (EMAC)
which provides 10M/100M/1000M Ethernet connectivity. This commit
adds support for the Allwinner EMAC from the Sun8i family (H2+, H3, A33, etc),
including emulation for the following functionality:

 * DMA transfers
 * MII interface
 * Transmit CRC calculation

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-10-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
82e4838249 hw/arm/allwinner: add SD/MMC host controller
The Allwinner System on Chip families sun4i and above contain
an integrated storage controller for Secure Digital (SD) and
Multi Media Card (MMC) interfaces. This commit adds support
for the Allwinner SD/MMC storage controller with the following
emulated features:

 * DMA transfers
 * Direct FIFO I/O
 * Short/Long format command responses
 * Auto-Stop command (CMD12)
 * Insert & remove card detection

The following boards are extended with the SD host controller:

 * Cubieboard (hw/arm/cubieboard.c)
 * Orange Pi PC (hw/arm/orangepi.c)

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200311221854.30370-9-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
6556617ce1 hw/arm/allwinner: add Security Identifier device
The Security Identifier device found in various Allwinner System on Chip
designs gives applications a per-board unique identifier. This commit
adds support for the Allwinner Security Identifier using a 128-bit
UUID value as input.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-8-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
d26af5ded9 hw/arm/allwinner: add CPU Configuration module
Various Allwinner System on Chip designs contain multiple processors
that can be configured and reset using the generic CPU Configuration
module interface. This commit adds support for the Allwinner CPU
configuration interface which emulates the following features:

 * CPU reset
 * CPU status

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-7-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
7e83c9ddbb hw/arm/allwinner-h3: add System Control module
The Allwinner H3 System on Chip has an System Control
module that provides system wide generic controls and
device information. This commit adds support for the
Allwinner H3 System Control module.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200311221854.30370-6-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
2e4dfe80f0 hw/arm/allwinner-h3: add USB host controller
The Allwinner H3 System on Chip contains multiple USB 2.0 bus
connections which provide software access using the Enhanced
Host Controller Interface (EHCI) and Open Host Controller
Interface (OHCI) interfaces. This commit adds support for
both interfaces in the Allwinner H3 System on Chip.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200311221854.30370-5-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
fef06c8b1b hw/arm/allwinner-h3: add Clock Control Unit
The Clock Control Unit is responsible for clock signal generation,
configuration and distribution in the Allwinner H3 System on Chip.
This commit adds support for the Clock Control Unit which emulates
a simple read/write register interface.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200311221854.30370-4-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
b0c966661e hw/arm: add Xunlong Orange Pi PC machine
The Xunlong Orange Pi PC is an Allwinner H3 System on Chip
based embedded computer with mainline support in both U-Boot
and Linux. The board comes with a Quad Core Cortex A7 @ 1.3GHz,
1GiB RAM, 100Mbit ethernet, USB, SD/MMC, USB, HDMI and
various other I/O. This commit add support for the Xunlong
Orange Pi PC machine.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: KONRAD Frederic <frederic.konrad@adacore.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200311221854.30370-3-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Niek Linnenbank
740dafc0ba hw/arm: add Allwinner H3 System-on-Chip
The Allwinner H3 is a System on Chip containing four ARM Cortex A7
processor cores. Features and specifications include DDR2/DDR3 memory,
SD/MMC storage cards, 10/100/1000Mbit Ethernet, USB 2.0, HDMI and
various I/O modules. This commit adds support for the Allwinner H3
System on Chip.

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200311221854.30370-2-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Guenter Roeck
67f52ebe54 hw/arm/fsl-imx25: Wire up USB controllers
i.MX25 supports two USB controllers. Let's wire them up.

With this patch, imx25-pdk can boot from both USB ports.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200310215146.19688-3-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Guenter Roeck
bfae1772c4 hw/arm/fsl-imx25: Wire up eSDHC controllers
Wire up eSDHC controllers in fsl-imx25. For imx25-pdk, connect drives
provided on the command line to available eSDHC controllers.

This patch enables booting the imx25-pdk emulation from SD card.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200310215146.19688-2-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: made commit subject consistent with other patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Igor Mammedov
d6f33c557c hw/arm/cubieboard: make sure SOC object isn't leaked
SOC object returned by object_new() is leaked in current code.
Set SOC parent explicitly to board and then unref to SOC object
to make sure that refererence returned by object_new() is taken
care of.

The SOC object will be kept alive by its parent (machine) and
will be automatically freed when MachineState is destroyed.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Andrew Jones <drjones@redhat.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200303091254.22373-1-imammedo@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:27:33 +00:00
Richard Henderson
38d931687f target/arm: Disable clean_data_tbi for system mode
We must include the tag in the FAR_ELx register when raising
an addressing exception.  Which means that we should not clear
out the tag during translation.

We cannot at present comply with this for user mode, so we
retain the clean_data_tbi function for the moment, though it
no longer does what it says on the tin for system mode.  This
function is to be replaced with MTE, so don't worry about the
slight misnaming.

Buglink: https://bugs.launchpad.net/qemu/+bug/1867072
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200308012946.16303-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:01:38 +00:00
Richard Henderson
cebfb64859 target/arm: Check addresses for disabled regimes
We fail to validate the upper bits of a virtual address on a
translation disabled regime, as per AArch64.TranslateAddressS1Off.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200308012946.16303-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:01:37 +00:00
Cédric Le Goater
e7e741ca9d aspeed/smc: Fix User mode select/unselect scheme
The Aspeed SMC Controller can operate in different modes : Read, Fast
Read, Write and User modes. When the User mode is configured, it
selects automatically the SPI slave device until the CE_STOP_ACTIVE
bit is set to 1. When any other modes are configured the device is
unselected. The HW logic handles the chip select automatically when
the flash is accessed through its AHB window.

When configuring the CEx Control Register, the User mode logic to
select and unselect the slave is incorrect and data corruption can be
seen on machines using two chips, witherspoon and romulus.

Rework the handler setting the CEx Control Register to fix this issue.

Fixes: 7c1c69bca4 ("ast2400: add SMC controllers (FMC and SPI)")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20200206112645.21275-3-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:01:37 +00:00
Cédric Le Goater
bd6ce9a6ed aspeed/smc: Add some tracing
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200206112645.21275-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 16:01:37 +00:00
Peter Maydell
563152e0d4 target/arm: Fix some comment typos
Fix a couple of comment typos.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-5-peter.maydell@linaro.org
2020-03-12 16:01:37 +00:00
Peter Maydell
19717e9b44 target/arm: Recalculate hflags correctly after writes to CONTROL
A write to the CONTROL register can change our current EL (by
writing to the nPRIV bit). That means that we can't assume
that s->current_el is still valid in trans_MSR_v7m() when
we try to rebuild the hflags.

Add a new helper rebuild_hflags_m32_newel() which, like the
existing rebuild_hflags_a32_newel(), recalculates the current
EL from scratch, and use it in trans_MSR_v7m().

This fixes an assertion about an hflags mismatch when the
guest changes privilege by writing to CONTROL.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-4-peter.maydell@linaro.org
2020-03-12 16:01:37 +00:00
Peter Maydell
0ea9e6583b target/arm: Update hflags in trans_CPS_v7m()
For M-profile CPUs, the FAULTMASK value affects the CPU's MMU index
(it changes the NegPri bit). We update the hflags after calls
to the v7m_msr helper in trans_MSR_v7m() but forgot to do so
in trans_CPS_v7m().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-3-peter.maydell@linaro.org
2020-03-12 16:01:37 +00:00
Peter Maydell
8c4985298f hw/intc/armv7m_nvic: Rebuild hflags on reset
Some of an M-profile CPU's cached hflags state depends on state that's
in our NVIC object. We already do an hflags rebuild when the NVIC
registers are written, but we also need to do this on NVIC reset,
because there's no guarantee that this will happen before the
CPU reset.

This fixes an assertion due to mismatched hflags which happens if
the CPU is reset from inside a HardFault handler.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-2-peter.maydell@linaro.org
2020-03-12 16:01:37 +00:00
Peter Maydell
67d9ef7d54 docs queue:
* Remove some no longer needed texinfo infrastructure
  * Reorder the top level index docs to put most useful manuals first
  * Split the Arm target-specific info into sub-pages
  * Improve the Arm documentation a bit with info previously
    only on the wiki page
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl5qIBIZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3icFD/9OA9qQTpjzzP3CqXDLIqL7
 mqkh0kcpp3QIgL8ttg406ftssxsHjSoyOpKfvHs0gLB29dQRj3rnmaHqlUQyo+RT
 QE/CcyQ5HDda1OQkENyZb0IRex3uBQbqdwh+7OwvnjVxfQxAhGXP9QXo/tcCAiP5
 XJ9k7noYQCxTzU1xTstXB2l/rRnx3E4MFTTJnA36uaQohhmADWWWJMAiDd6qR1tC
 crpukbUYV9cu/QHVBkufLF5MaN/TogWObgEQ3UpdvcbZCcWc6LF5TydNLhR6GPG4
 bN/0r/uSWzT67yLwTIIlASAfwAHj8A4v7louQVIIQnuwZvx/zzkBQtzQ3oroGtnu
 M/ZBcuGxHrgX0PsxM1w/X2NEqdR2ug9YAb4Vd263sfEW26xd2Dpo2PwXiX24AlTF
 YJcB8am1+SZtjCCK5OI1GcgwP3/iiJAah/J1uXEVzja0OHpzVJI/oe7aIiUEsLMc
 LxK+CMsnfiwbYxw1LBOXLKXAwfqaKN/sFsLDxLKUgtBn7WWEhDmfO8kzHIv59Cev
 DMn7UUEK3reQYmoW8Jlelbk2pnDvMF//WKNrVlliF0KSU60cOc24ENT0HAih8DCL
 ZcFq7uARbsZJPanzb5YSgvCxST3kyzLP9Yn4rsQkQrUmyAI3tHuFJ8uSxXSc6NTz
 I9T1i5wZLyKTTJQ3NI4AWQ==
 =ET1a
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-docs-20200312' into staging

docs queue:
 * Remove some no longer needed texinfo infrastructure
 * Reorder the top level index docs to put most useful manuals first
 * Split the Arm target-specific info into sub-pages
 * Improve the Arm documentation a bit with info previously
   only on the wiki page

# gpg: Signature made Thu 12 Mar 2020 11:42:10 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-docs-20200312:
  docs: Be consistent about capitalization of 'Arm'
  docs: Move arm-cpu-features.rst into the system manual
  docs/system/target-arm.rst: Add some introductory text
  docs/system: Split target-arm.rst into sub-documents
  Makefile: Allow for subdirectories in Sphinx manual dependencies
  docs/qemu-option-trace.rst.inc: Remove redundant comment
  docs/index.rst, docs/index.html.in: Reorder manuals
  Makefile: Make all Sphinx documentation depend on the extensions
  docs/sphinx/hxtool.py: Remove STEXI/ETEXI support
  hxtool: Remove Texinfo generation support
  Update comments in .hx files that mention Texinfo
  Makefile: Remove redundant Texinfo related code

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 15:20:52 +00:00
Peter Maydell
474acbe05d Fix the proxy fsdev so that it honours "readonly" and "writeout".
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEtIKLr5QxQM7yo0kQcdTV5YIvc9YFAl5nr1cACgkQcdTV5YIv
 c9ZRhhAAqsllaaYs7hkPKgtZKwC46Kfi97+pLt73rWikewc7B6/LP2n0ncqgGyrt
 OfSqosRmXNy2AP4g/gJq4/r7C9gOavCdGpD5O+F2zGX7t+J8bUK1JdglPI5QbD7c
 eTmaFfLuDczXPK1yC7YZSBInetNFIa/TggyhjLBKQ6KkmsJ0dECXwToJjdUqEHem
 SiG6xB9Go1yoBGzphevCny49g76Tb+T+SFSKmNhF/IcRzD6tcbH0FFuqX+NO7CQ+
 yFDAHaWDApmMOgwM4cbHulMoXOmw0DbsklWY6is8m0xwDlBpo0aGbW/6vqYHZUAB
 SYE/eSeBOcIb34qI1A7AFdZLRnfM3IZUBf3MBkOBpHH4mbLyoJUcT12Hx1DjGy6A
 t4srssBQoQkO4HEVQSLz5fXWE4vAti6b65GEMhzoKYL6qf6t3Q6xOLTLJpINXqJS
 s5MO/JmAFb57Y3+ZV8oW6TRdXDN9Ur0d6bb5DbShZI424g0SSX0nIbQ+6lf+CHsZ
 fSk24NAkxPNpgFxQWVU6RiriskBo0vm2Z6c593tFbOL5vCDesnlE3bUuuY1ohE4v
 yOkkB/GhN+lGeTClpZnXRjjfqmU0si34qxjdmdMYMTSeVRd/2EQV+fdHA0Y2BFRm
 kSZ+8BW+x1vrzQPPlhIzZM4sHtWWf3GkPFSZ6UvuFgVgZziCZ/Q=
 =/xv/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/gkurz/tags/9p-next-2020-03-10' into staging

Fix the proxy fsdev so that it honours "readonly" and "writeout".

# gpg: Signature made Tue 10 Mar 2020 15:16:39 GMT
# gpg:                using RSA key B4828BAF943140CEF2A3491071D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>" [full]
# gpg:                 aka "Gregory Kurz <gregory.kurz@free.fr>" [full]
# gpg:                 aka "[jpeg image of size 3330]" [full]
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3  4910 71D4 D5E5 822F 73D6

* remotes/gkurz/tags/9p-next-2020-03-10:
  9p/proxy: Fix export_flags

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12 14:47:42 +00:00
Peter Maydell
d46f81cb74 tests: Disable dbus-vmstate-test
The dbus-vmstate-test has been failing in some Patchew configs
since about the 6th March:

  dbus-daemon[9321]: Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry

  **
  ERROR:/tmp/qemu-test/src/tests/qtest/dbus-vmstate-test.c:114:get_connection: assertion failed (err == NULL): The connection is closed (g-io-error-quark, 18)
  cleaning up pid 9321
  ERROR - Bail out! ERROR:/tmp/qemu-test/src/tests/qtest/dbus-vmstate-test.c:114:get_connection: assertion failed (err == NULL): The connection is closed (g-io-error-quark, 18)
  make: *** [/tmp/qemu-test/src/tests/Makefile.include:632: check-qtest-x86_64] Error 1
  make: *** Waiting for unfinished jobs....

It's not clear why this is happening (perhaps a recently revealed
race condition or a change in the patchew build environment?).

For the moment, disable this test so that patchew test runs are
useful and don't email the list with spurious failure mails.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200310152141.13959-1-peter.maydell@linaro.org
2020-03-12 13:49:11 +00:00
Peter Maydell
6fe6d6c9a9 docs: Be consistent about capitalization of 'Arm'
The company 'Arm' went through a rebranding some years back
involving a recapitalization from 'ARM' to 'Arm'. As a result
our documentation is a bit inconsistent between the two forms.
It's not worth trying to update everywhere in QEMU, but it's
easy enough to make docs/ consistent.

Note that "ARMv8" and similar architecture names, and
older CPU names like "ARM926" still retain all-caps.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-6-peter.maydell@linaro.org
2020-03-12 11:20:20 +00:00
Peter Maydell
34f18ab14d docs: Move arm-cpu-features.rst into the system manual
Now we have somewhere to put arm-specific rst documentation,
we can move arm-cpu-features.rst from the docs/ top level
directory into docs/system/arm/.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-5-peter.maydell@linaro.org
2020-03-12 11:20:20 +00:00
Peter Maydell
d3149c590d docs/system/target-arm.rst: Add some introductory text
Now we've moved the various bits of per-board documentation into
their own files, the top level document is a little bare. Add
some introductory information, including a note that many
of the board models we support are currently undocumented.

(Most sections of this new text were originally written by me
for the wiki page https://wiki.qemu.org/Documentation/Platforms/ARM)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-4-peter.maydell@linaro.org
2020-03-12 11:20:20 +00:00
Peter Maydell
c11a8e890c docs/system: Split target-arm.rst into sub-documents
Currently the documentation for Arm system emulator targets is in a
single target-arm.rst.  This describes only some of the boards and
often in a fairly abbreviated fashion. Restructure it so that each
board has its own documentation file in the docs/system/arm/
subdirectory.

This will hopefully encourage us to write board documentation that
describes the board in detail, rather than a few brief paragraphs
in a single long page. The table of contents should also help users
to find the board they care about faster.

Once the structure is in place we'll be able to move microvm.rst
from the top-level docs/ directory.

All the text from the old page is retained, except for the final
paragraph ("A Linux 2.6 test image is available on the QEMU web site.
More information is available in the QEMU mailing-list archive."),
which is deleted. The git history shows this was originally added
in reference to the integratorcp board (at that time the only
Arm board that was supported), and has subsequently gradually been
further and further separated from the integratorcp documentation
by the insertion of other board documentation sections. It's
extremely out of date and no longer accurate, since AFAICT there
isn't an integratorcp kernel on the website any more; so better
deleted than retained.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-3-peter.maydell@linaro.org
2020-03-12 11:20:20 +00:00
Peter Maydell
814e068fb2 Makefile: Allow for subdirectories in Sphinx manual dependencies
Currently we put 'docs/foo/*.rst' in the Make list of dependencies
for the Sphinx 'foo' manual, which means all the files must be
in the top level of that manual's directory. We'd like to be
able to have subdirectories inside some of the manuals, so add
'docs/foo/*/*.rst' to the dependencies too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200309215818.2021-2-peter.maydell@linaro.org
2020-03-12 11:20:19 +00:00
Peter Maydell
3290e12d6c docs/qemu-option-trace.rst.inc: Remove redundant comment
The Texinfo version of the tracing options documentation has now
been deleted, so we can remove the now-redundant comment at the top
of the rST version that was reminding us that the two should be
kept in sync.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-8-peter.maydell@linaro.org
2020-03-12 11:14:06 +00:00
Peter Maydell
b29a59fb66 docs/index.rst, docs/index.html.in: Reorder manuals
Now that qemu-doc.html is no longer present, the ordering of manuals
within the top-level index page looks a bit odd. Reshuffle so that
the manuals the user is most likely to be interested in are at the
top of the list, and the reference material is at the bottom.

Similarly, we reorder the index.rst file used as the base of
the "all manuals in one" documentation for readthedocs.

The new order is:
 * system
 * user
 * tools
 * interop
 * specs
 * QMP reference (if present)
 * Guest agent protocol reference (if present)
 * devel (if present)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-7-peter.maydell@linaro.org
2020-03-12 11:14:06 +00:00
Peter Maydell
9165d323b0 Makefile: Make all Sphinx documentation depend on the extensions
Add the Python source files of our Sphinx extensions to the
dependencies of the Sphinx manuals, so that if we edit the
extension source code the manuals get rebuilt.

Adding this dependency unconditionally means that we'll rebuild
a manual even if it happens to not use the extension whose
source file was changed, but this is simpler and less error
prone, and it's unlikely that we'll be making frequent changes
to the extensions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-6-peter.maydell@linaro.org
2020-03-12 11:14:06 +00:00
Peter Maydell
80a046c51a docs/sphinx/hxtool.py: Remove STEXI/ETEXI support
Now that none of our input .hx files have STEXI/ETEXI blocks,
we can remove the code in the Sphinx hxtool extension that
supported parsing them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-5-peter.maydell@linaro.org
2020-03-12 11:14:06 +00:00
Peter Maydell
3885e2c25c hxtool: Remove Texinfo generation support
All the STEXI/ETEXI blocks and the Makfile rules that use them have now
been removed from the codebase. We can remove the code from the hxtool
script which handles the STEXI/ETEXI directives and the '-t' option.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-4-peter.maydell@linaro.org
2020-03-12 11:14:05 +00:00
Peter Maydell
3c95fdef94 Update comments in .hx files that mention Texinfo
Update the header comments in .hx files that mention STEXI/ETEXI
markup; this is now SRST/ERST as all these files have been
converted to rST.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-3-peter.maydell@linaro.org
2020-03-12 11:14:05 +00:00
Peter Maydell
d1055e3a2a Makefile: Remove redundant Texinfo related code
The recent conversion of qemu-doc.texi to rST forgot a few stray bits
of makefile code that are now redundant. Remove them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-2-peter.maydell@linaro.org
2020-03-12 11:14:05 +00:00
Peter Maydell
5931ed5641 Block patches for the 5.0 softfreeze:
- qemu-img measure for LUKS
 - Improve block-copy's performance by reducing inter-request
   dependencies
 - Make curl's detection of accept-ranges more robust
 - Memleak fixes
 - iotest fix
 -----BEGIN PGP SIGNATURE-----
 
 iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl5o5UUSHG1yZWl0ekBy
 ZWRoYXQuY29tAAoJEPQH2wBh1c9AnpMIALI1JGJ+kywe+BNTphOKtFGuIuHku/K4
 2GujC9WjX4to1xyozockXcP/AlFCk1yicbxW8hxPMxgtNmLh6E6Y2vRNT4/Fnpjc
 KeyFw062rtD/O6H8jchfX1wIaMBDBASM2GGUtonbfs9mdYmFnEPg/9jo0eX/b9Qp
 kEDFyVonJsAGFT7gWYB7p2RxToqC/JQBdenacKuYeKkLQOMvUHChERktnRhSfRt6
 bJIBkQ1e8xFuuFfnEUQR2GkvzzVw8k7kkY5gSN5m1kBCi3D1i/Pee5CFkYnQFiAD
 66GGKH5OIFt83t7msqu1zhb7kobZ1OH671nMSTdqTRncRnQfLWloCkk=
 =D7LF
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-03-11' into staging

Block patches for the 5.0 softfreeze:
- qemu-img measure for LUKS
- Improve block-copy's performance by reducing inter-request
  dependencies
- Make curl's detection of accept-ranges more robust
- Memleak fixes
- iotest fix

# gpg: Signature made Wed 11 Mar 2020 13:19:01 GMT
# gpg:                using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg:                issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2020-03-11:
  block/block-copy: hide structure definitions
  block/block-copy: reduce intersecting request lock
  block/block-copy: rename start to offset in interfaces
  block/block-copy: refactor interfaces to use bytes instead of end
  block/block-copy: factor out find_conflicting_inflight_req
  block/block-copy: use block_status
  block/block-copy: specialcase first copy_range request
  block/block-copy: fix progress calculation
  job: refactor progress to separate object
  block/qcow2-threads: fix qcow2_decompress
  qemu-img: free memory before re-assign
  block/qcow2: do free crypto_opts in qcow2_close()
  iotests: Fix nonportable use of od --endian
  block/curl: HTTP header field names are case insensitive
  block/curl: HTTP header fields allow whitespace around values
  iotests: add 288 luks qemu-img measure test
  qemu-img: allow qemu-img measure --object without a filename
  luks: implement .bdrv_measure()
  luks: extract qcrypto_block_calculate_payload_offset()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-11 17:06:40 +00:00
Peter Maydell
6e8a73e911 Pull request
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl5o3EQACgkQnKSrs4Gr
 c8jbYwgAupuS62MCITszybRE5Ote5CL80QDbMXNsZnZh6YBIGhPCqW2zdI2+m0zu
 +qoN6x6dxxNUWCvNlhbOcA45fiZVmYzS69TiEo21kCDijoK+h8+W+YbXuxGR2xJi
 cZMm8Q1DiK6Lj3vyfiwkFf4ns3VNz9DhI9hXu6CcpSkNcp79elQu87JJbzEWWWWy
 uEc7uEyBr0uCAKLEJvaLzzzWE2D2i6qKlmj3G17UbDNgCJ/Q/5HX13RUfMrgNgiP
 wmpcJ5MsB3Prz3K4XMMytUKXX/M8zpRLahp3p31t9qHelTWC3Lk1U4xzLPTJZPlm
 if/lrGRCRml+DKb9keBjWeTF4U31vg==
 =LftU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Wed 11 Mar 2020 12:40:36 GMT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  aio-posix: remove idle poll handlers to improve scalability
  aio-posix: support userspace polling of fd monitoring
  aio-posix: add io_uring fd monitoring implementation
  aio-posix: simplify FDMonOps->update() prototype
  aio-posix: extract ppoll(2) and epoll(7) fd monitoring
  aio-posix: move RCU_READ_LOCK() into run_poll_handlers()
  aio-posix: completely stop polling when disabled
  aio-posix: remove confusing QLIST_SAFE_REMOVE()
  qemu/queue.h: clear linked list pointers on remove

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-11 14:41:27 +00:00
Vladimir Sementsov-Ogievskiy
397f4e9d83 block/block-copy: hide structure definitions
Hide structure definitions and add explicit API instead, to keep an
eye on the scope of the shared fields.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-10-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-03-11 12:42:30 +01:00
Vladimir Sementsov-Ogievskiy
5332e5d210 block/block-copy: reduce intersecting request lock
Currently, block_copy operation lock the whole requested region. But
there is no reason to lock clusters, which are already copied, it will
disturb other parallel block_copy requests for no reason.

Let's instead do the following:

Lock only sub-region, which we are going to operate on. Then, after
copying all dirty sub-regions, we should wait for intersecting
requests block-copy, if they failed, we should retry these new dirty
clusters.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200311103004.7649-9-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-03-11 12:42:30 +01:00
Vladimir Sementsov-Ogievskiy
8719091f9d block/block-copy: rename start to offset in interfaces
offset/bytes pair is more usual naming in block layer, let's use it.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-03-11 12:42:30 +01:00
Vladimir Sementsov-Ogievskiy
dafaf13593 block/block-copy: refactor interfaces to use bytes instead of end
We have a lot of "chunk_end - start" invocations, let's switch to
bytes/cur_bytes scheme instead.

While being here, improve check on block_copy_do_copy parameters to not
overflow when calculating nbytes and use int64_t for bytes in
block_copy for consistency.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-7-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-03-11 12:42:30 +01:00