The mcycle/minstret counter's stop flag is mistakenly updated on a copy
on stack. Thus the counter increments even when the CY/IR bit in the
mcountinhibit register is set. This commit corrects its behavior.
Fixes: 3780e33732 (target/riscv: Support mcycle/minstret write operation)
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 5cb0e7abe1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A CAN sja1000 standard frame filter mask has been computed and applied
incorrectly for standard frames when single Acceptance Filter Mode
(MOD_AFM = 1) has been selected. The problem has not been found
by Linux kernel testing because it uses dual filter mode (MOD_AFM = 0)
and leaves falters fully open.
The problem has been noticed by Grant Ramsay when testing with Zephyr
RTOS which uses single filter mode.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reported-by: Grant Ramsay <gramsay@enphaseenergy.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2028
Fixes: 733210e754 ("hw/net/can: SJA1000 chip register level emulation")
Message-ID: <20240103231426.5685-1-pisa@fel.cvut.cz>
(cherry picked from commit 25145a7d77)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We have a few test cases that include tests for corner case aspects of
internal snapshots, but nothing that tests that they actually function
as snapshots or that involves deleting a snapshot. Add a test for this
kind of basic internal snapshot functionality.
The error cases include a regression test for the crash we just fixed
with snapshot operations on inactive images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit bb6e2511eb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, the conflict between -incoming and -loadvm is only detected
when loading the snapshot fails because the image is still inactive for
the incoming migration. This results in a suboptimal error message:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: Device 'ide0-hd0' is writable but does not support snapshots
Catch the situation already in qemu_validate_options() to improve the
message:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: 'incoming' and 'loadvm' options are mutually exclusive
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 5a7f21efaf)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
bdrv_is_read_only() only checks if the node is configured to be
read-only eventually, but even if it returns false, writing to the node
may not be permitted at the moment (because it's inactive).
bdrv_is_writable() checks that the node can be written to right now, and
this is what the snapshot operations really need.
Change bdrv_can_snapshot() to use bdrv_is_writable() to fix crashes like
the following:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: ../block/io.c:1990: int bdrv_co_write_req_prepare(BdrvChild *, int64_t, int64_t, BdrvTrackedRequest *, int): Assertion `!(bs->open_flags & BDRV_O_INACTIVE)' failed.
The resulting error message after this patch isn't perfect yet, but at
least it doesn't crash any more:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: Device 'ide0-hd0' is writable but does not support snapshots
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit d3007d348a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
MDCR_EL2.HPMN allows an hypervisor to limit the number of PMU counters
available to EL1 and EL0 (to keep the others to itself). QEMU already
implements this split correctly, except for PMCR_EL0.N reads: the number
of counters read by EL1 or EL0 should be the one configured in
MDCR_EL2.HPMN.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20231215144652.4193815-2-jean-philippe@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 6980c31dec)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In 32-bit mode, pc = eip + cs_base is also 32-bit, and must wrap.
Failure to do so results in incorrect memory exceptions to the guest.
Before 732d548732, this was implicitly done via truncation to
target_ulong but only in qemu-system-i386, not qemu-system-x86_64.
To fix this, we must add conditional zero-extensions.
Since we have to test for 32 vs 64-bit anyway, note that cs_base
is always zero in 64-bit mode.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2022
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231212172510.103305-1-richard.henderson@linaro.org>
(cherry picked from commit b5e0d5d22f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix in target/i386/tcg/tcg-cpu.c for v8.1.0-1190-gb77af26e97
"accel/tcg: Replace CPUState.env_ptr with cpu_env()")
The AioContext must be unlocked before calling blk_co_unref(), because
it takes the AioContext lock internally in blk_unref_bh(), which is
scheduled in the main thread. If we don't unlock, the AioContext is
locked twice and nested event loops such as in bdrv_graph_wrlock() will
deadlock.
Cc: <qemu-stable@nongnu.org>
Fixes: https://issues.redhat.com/browse/RHEL-15965
Fixes: 0c7d204f50
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231208124352.30295-1-kwolf@redhat.com>
(cherry picked from commit 755ae3811f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Using direct pointer dereferencing can allow for unaligned accesses,
which was seen during execution with sanitizers enabled.
Cc: qemu-stable@nongnu.org
Reviewed-by: Chris Rauer <crauer@google.com>
Reviewed-by: Peter Foley <pefoley@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231116163633.276671-1-venture@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 2b8fe81b3c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is no architectural requirement that SME implies SVE, but
our implementation currently assumes it. (FEAT_SME_FA64 does
imply SVE.) So if you try to run a CPU with eg "-cpu max,sve=off"
you quickly run into an assert when the guest tries to write to
SMCR_EL1:
#6 0x00007ffff4b38e96 in __GI___assert_fail
(assertion=0x5555566e69cb "sm", file=0x5555566e5b24 "../../target/arm/helper.c", line=6865, function=0x5555566e82f0 <__PRETTY_FUNCTION__.31> "sve_vqm1_for_el_sm") at ./assert/assert.c:101
#7 0x0000555555ee33aa in sve_vqm1_for_el_sm (env=0x555557d291f0, el=2, sm=false) at ../../target/arm/helper.c:6865
#8 0x0000555555ee3407 in sve_vqm1_for_el (env=0x555557d291f0, el=2) at ../../target/arm/helper.c:6871
#9 0x0000555555ee3724 in smcr_write (env=0x555557d291f0, ri=0x555557da23b0, value=2147483663) at ../../target/arm/helper.c:6995
#10 0x0000555555fd1dba in helper_set_cp_reg64 (env=0x555557d291f0, rip=0x555557da23b0, value=2147483663) at ../../target/arm/tcg/op_helper.c:839
#11 0x00007fff60056781 in code_gen_buffer ()
Avoid this unsupported and slightly odd combination by
disabling SME when SVE is not present.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2005
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231127173318.674758-1-peter.maydell@linaro.org
(cherry picked from commit f7767ca301)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit d921fea338 ("ui/vnc-clipboard: fix infinite loop in
inflate_buffer (CVE-2023-3255)") removed this hunk, but it is still
required, because it can happen that stream.avail_in becomes zero
before coming across a return value of Z_STREAM_END in the loop.
This fixes the host->guest direction of the clipboard with noVNC and
TigerVNC as clients.
Fixes: d921fea338 ("ui/vnc-clipboard: fix infinite loop in inflate_buffer (CVE-2023-3255)")
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231122125826.228189-1-f.ebner@proxmox.com>
(cherry picked from commit ebfbf39467)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 6f189a08c1 ("ui/gtk-egl: Check EGLSurface before doing
scanout") introduced a regression when QEMU is running with a
virtio-gpu-gl-device on a host under X11. After the guest has
initialized the virtio-gpu-gl-device, the guest screen only
shows "Display output is not active.".
Commit 6f189a08c1 moved all function calls in
gd_egl_scanout_texture() to a code path which is only called
once after gd_egl_init() succeeds in gd_egl_scanout_texture().
Move all function calls in gd_egl_scanout_texture() back to
the regular code path so they get always called if one of the
gd_egl_init() calls was successful.
Fixes: 6f189a08c1 ("ui/gtk-egl: Check EGLSurface before doing scanout")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231111104020.26183-1-vr_qemu@t-online.de>
(cherry picked from commit 53a939f1bf)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The first time gd_egl_scanout_texture() is called, there's a possibility
that the GTK drawing area might not be realized yet, in which case its
associated GdkWindow is NULL. This means gd_egl_init() was also skipped
and the EGLContext and EGLSurface stored in the VirtualGfxConsole are
not valid yet.
Continuing with the scanout in this conditions would result in hitting
an assert in libepoxy: "Couldn't find current GLX or EGL context".
A possible workaround is to just ignore the scanout request, giving the
the GTK drawing area some time to finish its realization. At that point,
the gd_egl_init() will succeed and the EGLContext and EGLSurface stored
in the VirtualGfxConsole will be valid.
Signed-off-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231016123215.2699269-1-quic_acaggian@quicinc.com>
(cherry picked from commit 6f189a08c1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the rollback in msix_set_vector_notifiers(), original patch forgot to
undo msix_vector_poll_notifier pointer.
Fixes: bbef882cc1 ("msi: add API to get notified about pending bit poll")
Signed-off-by: Robert Hoo <robert.hoo.linux@gmail.com>
Message-Id: <20231113081349.1307-1-robert.hoo.linux@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 2d37fe9e5e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
erst_realizefn() passes @errp to functions without checking for
failure. If it runs into another failure, it trips error_setv()'s
assertion.
Use the ERRP_GUARD() macro and check *errp, as suggested in commit
ae7c80a7bd ("error: New macro ERRP_GUARD()").
Cc: qemu-stable@nongnu.org
Fixes: f7e26ffa59 ("ACPI ERST: support for ACPI ERST feature")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231120130017.81286-1-philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 20bc50137f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_new() aborts if the allocation fails so it returns NULL only if the
requested allocation size is zero. register_vfs() makes such an
allocation if NumVFs is zero so it should not assert that g_new()
returns a non-NULL value.
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Buglink: https://issues.redhat.com/browse/RHEL-17209
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231123075630.12057-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Yanghang Liu<yanghliu@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 714a1415d7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
After a relatively short time, there is an multiplication overflow
when multiplying (now - buft_start) with hda_bytes_per_second().
While the uptime now - buft_start only overflows after 2**63 ns
= 292.27 years, this happens hda_bytes_per_second() times faster
with the multiplication. At 44100 samples/s * 2 channels
* 2 bytes/channel = 176400 bytes/s that is 14.52 hours. After the
multiplication overflow the affected audio stream stalls.
Replace the multiplication and following division with muldiv64()
to prevent a multiplication overflow.
Fixes: 280c1e1cdb ("audio/hda: create millisecond timers that handle IO")
Reported-by: M_O_Bz <m_o_bz@163.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231105172552.8405-1-vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 74e8593e7e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The current implementation initializes the stack pointer of AVR devices
to 0. Although older AVR devices used to be like that, newer ones set
it to RAMEND.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1525
Signed-off-by: Gihun Nam <gihun.nam@outlook.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <PH0P222MB0010877445B594724D40C924DEBDA@PH0P222MB0010.NAMP222.PROD.OUTLOOK.COM>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 235948bf53)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The VirtioPCIDeviceTypeInfo structure, added in commit a4ee4c8baa
("virtio: Helper for registering virtio device types") got extended
in commit 8ea90ee690 ("virtio: add class_size") with the @class_size
field. Do similarly with the @instance_finalize field.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-2-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 837053a7f4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit 9e4aa1fafe added:
DEFINE_PROP_ARRAY("pg0-lock",
XlnxVersalEFuseCtrl, extra_pg0_lock_n16,
extra_pg0_lock_spec, qdev_prop_uint16, uint16_t),
but forgot to free the 'extra_pg0_lock_spec' array. Do it in the
instance_finalize() handler.
Cc: qemu-stable@nongnu.org
Fixes: 9e4aa1fafe ("hw/nvram: Xilinx Versal eFuse device") # v6.2.0+
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-6-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 4f10c66077)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit 68fbcc344e added:
DEFINE_PROP_ARRAY("read-only", XlnxEFuse, ro_bits_cnt, ro_bits,
qdev_prop_uint32, uint32_t),
but forgot to free the 'ro_bits' array. Do it in the instance_finalize
handler.
Cc: qemu-stable@nongnu.org
Fixes: 68fbcc344e ("hw/nvram: Introduce Xilinx eFuse QOM") # v6.2.0+
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-5-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 49b3e28b7b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit 4fb013afcc added:
DEFINE_PROP_ARRAY("oscclk", MPS2SCC, num_oscclk, oscclk_reset,
qdev_prop_uint32, uint32_t),
but forgot to free the 'oscclk_reset' array. Do it in the
instance_finalize() handler.
Cc: qemu-stable@nongnu.org
Fixes: 4fb013afcc ("hw/misc/mps2-scc: Support configurable number of OSCCLK values") # v6.0.0+
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-4-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 896dd6ff7b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit 8077b8e549 added:
DEFINE_PROP_ARRAY("reserved-regions", VirtIOIOMMUPCI,
vdev.nb_reserved_regions, vdev.reserved_regions,
qdev_prop_reserved_region, ReservedRegion),
but forgot to free the 'vdev.reserved_regions' array. Do it in the
instance_finalize() handler.
Cc: qemu-stable@nongnu.org
Fixes: 8077b8e549 ("virtio-iommu-pci: Add array of Interval properties") # v5.1.0+
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20231121174051.63038-3-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit c9a4aa06df)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: fixup hw/virtio/virtio-iommu-pci.c for before v8.1.0-2552-g41cc70cdf5,
"virtio-iommu: Rename reserved_regions into prop_resv_regions" -- so now
patch subject matches actual change again)
In commit edac4d8a16 back in 2015 when we added support for
the virtual timer offset CNTVOFF_EL2, we didn't correctly update
the timer-recalculation code that figures out when the timer
interrupt is next going to change state. We got it wrong in
two ways:
* for the 0->1 transition, we didn't notice that gt->cval + offset
can overflow a uint64_t
* for the 1->0 transition, we didn't notice that the transition
might now happen before the count rolls over, if offset > count
In the former case, we end up trying to set the next interrupt
for a time in the past, which results in QEMU hanging as the
timer fires continuously.
In the latter case, we would fail to update the interrupt
status when we are supposed to.
Fix the calculations in both cases.
The test case is Alex Bennée's from the bug report, and tests
the 0->1 transition overflow case.
Fixes: edac4d8a16 ("target-arm: Add CNTVOFF_EL2")
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/60
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231120173506.3729884-1-peter.maydell@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 8d37a1425b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The syndrome register value always has an IL field at bit 25, which
is 0 for a trap on a 16 bit instruction, and 1 for a trap on a 32
bit instruction (or for exceptions which aren't traps on a known
instruction, like PC alignment faults). This means that our
syn_*() functions should always either take an is_16bit argument to
determine whether to set the IL bit, or else unconditionally set it.
We missed setting the IL bit for the syndrome for three kinds of trap:
* an SVE access exception
* a pointer authentication check failure
* a BTI (branch target identification) check failure
All of these traps are AArch64 only, and so the instruction causing
the trap is always 64 bit. This means we can unconditionally set
the IL bit in the syn_*() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231120150121.3458408-1-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 11a3c4a286)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the text description file is larger than DESC_SIZE, we force the last
byte in the buffer to be 0 and write it out.
This results in a corruption.
Try to allocate a big buffer in this case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1923
Signed-off-by: Fam Zheng <fam@euphon.net>
Message-ID: <20231124115654.3239137-1-fam@euphon.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 9fb7b350ba)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to RISCV Specification sect 9.5 on two stage translation when
V=1 the vsstatus(mstatus in QEMU's terms) field MXR, which makes
execute-only pages readable, only overrides VS-stage page protection.
Setting MXR at HS-level(mstatus_hs), however, overrides both VS-stage
and G-stage execute-only permissions.
The hypervisor extension changes the behavior of MXR\MPV\MPRV bits.
Due to RISCV Specification sect. 9.4.1 when MPRV=1, explicit memory
accesses are translated and protected, and endianness is applied, as
though the current virtualization mode were set to MPV and the current
nominal privilege mode were set to MPP. vsstatus.MXR makes readable
those pages marked executable at the VS translation stage.
Fixes: 36a18664ba ("target/riscv: Implement second stage MMU")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231121071757.7178-3-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 6bca4d7d1f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to RISCV privileged spec sect. 5.3.2 Virtual Address Translation Process
access-fault exceptions may raise only after PMA/PMP check. Current implementation
generates an access-fault for mbare mode even if there were no PMA/PMP errors.
This patch removes the erroneous MMU mode check and generates an access-fault
exception based on the pmp_violation flag only.
Fixes: 1448689c7b ("target/riscv: Allow specifying MMU stage")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231121071757.7178-2-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 82d53adfbb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If you check the manual of SiFive E310 (https://cdn.sparkfun.com/assets/7/f/0/2/7/fe310-g002-manual-v19p05.pdf),
you can see in Figure 1 that the CLINT is connected to the real time clock, which also feeds the AON peripheral (they share the same clock).
In page 43, the docs also say that the timer registers of the CLINT count ticks from the rtcclk.
I am currently playing with bare metal applications both in QEMU and a physical SiFive E310 board and
I confirm that the CLINT clock in the physical board runs at 32.768 kHz.
In QEMU, the same app produces a completely different outcome, as sometimes a new CLINT interrupt is triggered before finishing other tasks.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1978
Signed-off-by: Rom\ufffd\ufffdn C\ufffd\ufffdrdenas <rcardenas.rod@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231117082840.55705-1-rcardenas.rod@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit a7472560ca)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 49554856f0 fixed a problem, where TPM devices were not appearing
in the FDT, by delaying the FDT creation up until virt_machine_done().
This create a side effect (see gitlab #1925) - devices that need access
to the '/chosen' FDT node during realize() stopped working because, at
that point, we don't have a FDT.
This happens because our FDT creation is monolithic, but it doesn't need
to be. We can add the needed FDT components for realize() time and, at
the same time, do another FDT round where we account for dynamic sysbus
devices. In other words, the problem fixed by 49554856f0 could also be
fixed by postponing only create_fdt_sockets() and its dependencies,
leaving everything else from create_fdt() to be done during init().
Split the FDT creation in two parts:
- create_fdt(), now moved back to virt_machine_init(), will create FDT
nodes that doesn't depend on additional (dynamic) devices from the
sysbus;
- a new finalize_fdt() step is added, where create_fdt_sockets() and
friends is executed, accounting for the dynamic sysbus devices that
were added during realize().
This will make both use cases happy: TPM devices are still working as
intended, and devices such as 'guest-loader' have a FDT to work on
during realize().
Fixes: 49554856f0 ("riscv: Generate devicetree only after machine initialization is complete")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1925
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231110172559.73209-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 7a87ba8956)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Support for probing the Zicboz block size landed in Linux 6.6, which was
released a few weeks ago. This provides the user-configured block size
when Zicboz is enabled.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231110173716.24423-1-palmer@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 301c65f49f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: fixup linux-user/syscall.c to before v8.1.0-2602-ge57039ddab
"target/riscv: rename ext_icboz to ext_zicboz")
assertRegexpMatches() has been removed in Python 3.12 and should be replaced by
assertRegex(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231114144832.71612-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit f0a663b4ce)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: adjust context for before v8.1.0-1582-g684750ab4f
"python/qemu: rename command() to cmd()")
assertEquals() has been removed in Python 3.12 and should be replaced by
assertEqual(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Message-ID: <20231114134326.287242-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 861f724d03)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: adjust context in pc_cpu_hotplug_props.py & cpu_queries.py for before
v8.1.0-1582-g684750ab4f "python/qemu: rename command() to cmd()")
The file offset of the load segment is not relevant to the
low address, only the beginning of the virtual address page.
Cc: qemu-stable@nongnu.org
Fixes: a93934fecd ("elf: take phdr offset into account when calculating the program load address")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1952
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 82d70a84c8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
This implementation follows what bottom half does, but it does not add
a tracepoint for the case that the network device backend started
delivering a packet to a device which is already engaging in I/O. This
is because such reentrancy frequently happens for
qemu_flush_queued_packets() and is insignificant.
Fixes: CVE-2023-3019
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 9050f976e4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
In preparation for such a change, add MemReentrancyGuard * as a
parameter of qemu_new_nic().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 7d0fefdf81)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: fixup in hw/net/xen_nic.c due to lack of v8.1.0-2771-g25967ff69f
"hw/xen: update Xen PV NIC to XenDevice model")
Legacy software contains a standard mechanism for generating a reset to a
Serial ATA device - setting the SRST (software reset) bit in the Device
Control register.
Serial ATA has a more robust mechanism called COMRESET, also referred to
as port reset. A port reset is the preferred mechanism for error
recovery and should be used in place of software reset.
Commit e2a5d9b3d9 ("hw/ide/ahci: simplify and document PxCI handling")
(mjt: 16cc9594d2 in stable-8.1 series, v8.1.1)
improved the handling of PxCI, such that PxCI gets cleared after handling
a non-NCQ, or NCQ command (instead of incorrectly clearing PxCI after
receiving anything - even a FIS that failed to parse, which should NOT
clear PxCI, so that you can see which command slot that caused an error).
However, simply clearing PxCI after a non-NCQ, or NCQ command, is not
enough, we also need to clear PxCI when receiving a SRST in the Device
Control register.
A legacy software reset is performed by the host sending two H2D FISes,
the first H2D FIS asserts SRST, and the second H2D FIS deasserts SRST.
The first H2D FIS will not get a D2H reply, and requires the FIS to have
the C bit set to one, such that the HBA itself will clear the bit in PxCI.
The second H2D FIS will get a D2H reply once the diagnostic is completed.
The clearing of the bit in PxCI for this command should ideally be done
in ahci_init_d2h() (if it was a legacy software reset that caused the
reset (a COMRESET does not use a command slot)). However, since the reset
value for PxCI is 0, modify ahci_reset_port() to actually clear PxCI to 0,
that way we can avoid complex logic in ahci_init_d2h().
This fixes an issue for FreeBSD where the device would fail to reset.
The problem was not noticed in Linux, because Linux uses a COMRESET
instead of a legacy software reset by default.
Fixes: e2a5d9b3d9 ("hw/ide/ahci: simplify and document PxCI handling")
Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-ID: <20231108222657.117984-1-nks@flawful.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit eabb921250)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(mjt: mention 16cc9594d2 for stable-8.1)
In FDPIC signal handlers are passed around as FD pointers. Actual code
address and GOT pointer must be fetched from memory by the QEMU code
that implements kernel signal delivery functionality. This change is
equivalent to the following kernel change:
9c2cc74fb31e ("xtensa: fix signal delivery to FDPIC process")
Cc: qemu-stable@nongnu.org
Fixes: d2796be69d ("linux-user: add support for xtensa FDPIC")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit 1b173d0606)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
AArch64 permits code at EL3 to use the HVC instruction; however the
exception we take should go to EL3, not down to EL2 (see the pseudocode
AArch64.CallHypervisor()). Fix the target EL.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20231109151917.1925107-1-peter.maydell@linaro.org
(cherry picked from commit fc58891d04)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the host kernel lacks vfio DMA limit reporting, do not attempt
to shrink the guest DMA aperture.
Fixes: df202e3ff3 ("s390x/pci: shrink DMA aperture to be bound by vfio DMA limit")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20231110175108.465851-3-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 8011b508cf)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
KVM for RISC-V started supporting KVM_GET_REG_LIST in Linux 6.6. It
consists of a KVM ioctl() that retrieves a list of all available regs
for get_one_reg/set_one_reg. Regs that aren't present in the list aren't
supported in the host.
This simplifies our lives when initing the KVM regs since we don't have
to always attempt a KVM_GET_ONE_REG for all regs QEMU knows. We'll only
attempt a get_one_reg() if we're sure the reg is supported, i.e. it was
retrieved by KVM_GET_REG_LIST. Any error in get_one_reg() will then
always considered fatal, instead of having to handle special error codes
that might indicate a non-fatal failure.
Start by moving the current kvm_riscv_init_multiext_cfg() logic into a
new kvm_riscv_read_multiext_legacy() helper. We'll prioritize using
KVM_GET_REG_LIST, so check if we have it available and, in case we
don't, use the legacy() logic.
Otherwise, retrieve the available reg list and use it to check if the
host supports our known KVM regs, doing the usual get_one_reg() for
the supported regs and setting cpu->cfg accordingly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231003132148.797921-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 608bdebb60)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: trivial context tweak in target/riscv/kvm.c)
Our error message is returning the value of 'ret', which will be always
-1 in case of error, and will not be that useful:
qemu-system-riscv64: Unable to read ISA_EXT KVM register ssaia, error -1
Improve the error message by outputting 'errno' instead of 'ret'. Use
strerrorname_np() to output the error name instead of the error code.
This will give us what we need to know right away:
qemu-system-riscv64: Unable to read ISA_EXT KVM register ssaia, error code: ENOENT
Given that we're going to exit(1) in this condition instead of
attempting to recover, remove the 'kvm_riscv_destroy_scratch_vcpu()'
call.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231003132148.797921-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 082e9e4a58)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is an error in Python 3.12; fix it by using a raw string literal.
Cc: <qemu-stable@nongnu.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231108105649.60453-1-marcandre.lureau@redhat.com>
(cherry picked from commit 4d96307c5b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231106093605.1349201-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit ebc14107f1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
LAALG uses op_laa() and wout_addu64(). The latter expects cc_src to be
set, but the former does not do it. This can lead to assertion failures
if something sets cc_src to neither 0 nor 1 before.
Fix by introducing op_laa_addu64(), which sets cc_src, and using it for
LAALG.
Fixes: 4dba4d6fef ("target/s390x: Use atomic operations for LOAD AND OP")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231106093605.1349201-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit bea402482a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231106093605.1349201-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 43fecbe7a5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
