ISM devices are sensitive to manipulation of the IOMMU, so the ISM device
needs to be reset before the vfio-pci device is reset (triggering a full
UNMAP). In order to ensure this occurs, trigger ISM device resets from
subsystem_reset before triggering the PCI bus reset (which will also
trigger vfio-pci reset). This only needs to be done for ISM devices
which were enabled for use by the guest.
Further, ensure that AIF is disabled as part of the reset event.
Fixes: ef1535901a ("s390x: do a subsystem reset before the unprotect on reboot")
Fixes: 03451953c7 ("s390x/pci: reset ISM passthrough devices on shutdown and system reset")
Reported-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-4-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 68c691ca99)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Typically we refresh the host fh during CLP enable, however it's possible
that the device goes through multiple reset events before the guest
performs another CLP enable. Let's handle this for now by refreshing the
host handle from vfio before disabling aif.
Fixes: 03451953c7 ("s390x/pci: reset ISM passthrough devices on shutdown and system reset")
Reported-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-3-mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 30e35258e2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use a flag to keep track of whether AIF is currently enabled. This can be
used to avoid enabling/disabling AIF multiple times as well as to determine
whether or not it should be disabled during reset processing.
Fixes: d0bc7091c2 ("s390x/pci: enable adapter event notification for interpreted devices")
Reported-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-2-mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 07b2c8e034)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Even though the BLAST command isn't fully implemented in QEMU, the DMA_STAT_BCMBLT
bit should be set after the command has been issued to indicate that the command
has completed.
This fixes an issue with the DC390 DOS driver which issues the BLAST command as
part of its normal error recovery routine at startup, and otherwise sits in a
tight loop waiting for DMA_STAT_BCMBLT to be set before continuing.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit c2d7de557d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The setting of DMA_STAT_DONE at the end of a DMA transfer can be configured to
generate an interrupt, however the Linux driver manually checks for DMA_STAT_DONE
being set and if it is, considers that a DMA transfer has completed.
If DMA_STAT_DONE is set but the ESP device isn't indicating an interrupt then
the Linux driver considers this to be a spurious interrupt. However this can
occur in QEMU as there is a delay between the end of DMA transfer where
DMA_STAT_DONE is set, and the ESP device raising its completion interrupt.
This appears to be an incorrect assumption in the Linux driver as the ESP and
PCI DMA interrupt sources are separate (and may not be raised exactly
together), however we can work around this by synchronising the setting of
DMA_STAT_DONE at the end of a DMA transfer with the ESP completion interrupt.
In conjunction with the previous commit Linux is now able to correctly boot
from an am53c974 PCI SCSI device on the hppa C3700 machine without emitting
"iget: checksum invalid" and "Spurious irq, sreg=10" errors.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 1e8e6644e0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The am53c974/dc390 PCI interrupt has two separate sources: the first is from the
internal ESP device, and the second is from the PCI DMA transfer logic.
Update the ESP interrupt handler so that it sets DMA_STAT_SCSIINT rather than
driving the PCI IRQ directly, and introduce a new esp_pci_update_irq() function
to generate the correct PCI IRQ level. In particular this fixes spurious interrupts
being generated by setting DMA_STAT_DONE at the end of a transfer if DMA_CMD_INTE_D
isn't set in the DMA_CMD register.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 6b41417d93)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The current code in esp_pci_dma_memory_rw() sets the DMA address to the value
of the DMA_SPA (Starting Physical Address) register which is incorrect: this
means that for each callback from the SCSI layer the DMA address is set back
to the starting address.
In the case where only a single SCSI callback occurs (currently for transfer
lengths < 128kB) this works fine, however for larger transfers the DMA address
wraps back to the initial starting address, corrupting the buffer holding the
data transferred to the guest.
Fix esp_pci_dma_memory_rw() to use the DMA_WAC (Working Address Counter) for
the DMA address which is correctly incremented across multiple SCSI layer
transfers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 84a6835e00)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add an update buffer where all block updates are staged.
Flush or discard updates properly, so we should never see
half-completed block writes in pflash storage.
Drop a bunch of FIXME comments ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240108160900.104835-4-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 284a7ee2e2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: drop const in hw/block/pflash_cfi01.c for before
v8.2.0-220-g7d5dc0a367 "hw/block: Constify VMState")
Use the helper functions we have to read/write multi-byte values
in correct byte order.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240108160900.104835-3-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 5dd58358a5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move the offset calculation, do it once at the start of the function and
let the 'p' variable point directly to the memory location which should
be updated. This makes it simpler to update other buffers than
pfl->storage in an upcoming patch. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240108160900.104835-2-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 3b14a555fd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The various operating systems (e.g. Linux, NetBSD) have issues
mapping the power button when it's stored in page zero.
NetBSD even crashes, because it fails to map that page and then
accesses unmapped memory.
Since we now have a consistent memory mapping of PDC in 32-bit
and 64-bit address space (the lower 32-bits of the address are in
sync) the power button can be moved back to PDC space.
This patch fixes the power button on Linux, NetBSD and HP-UX.
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Bruno Haible <bruno@clisp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit ed35afcb33)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
NetBSD accesses some astro and elroy registers which aren't accessed
by Linux yet. Add emulation for those registers to allow NetBSD to
boot further.
Please note that this patch is not sufficient to completely boot up
NetBSD on the 64-bit C3700 machine yet.
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Bruno Haible <bruno@clisp.org>
(cherry picked from commit 3b57c15f02)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Recognize the qemu --nodefaults option, which will disable the
following default devices on hppa:
- lsi53c895a SCSI controller,
- artist graphics card,
- LASI 82596 NIC,
- tulip PCI NIC,
- second serial PCI card,
- USB OHCI controller.
Adding this option is very useful to allow manual testing and
debugging of the other possible devices on the command line.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit d8a3220005)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The physical hardware allows DIMMs of 4 MB size and above, allowing up
to 3840 MB of memory, but is restricted by setup code to 3 GB.
Increase the limit to allow up to the maximum amount of memory.
Btw. the memory area from 0xf000.0000 to 0xffff.ffff is reserved by
the architecture for firmware and I/O memory and can not be used for
standard memory.
An upcoming 64-bit SeaBIOS-hppa firmware will allow more than 3.75GB
on 64-bit HPPA64. In this case the ram_max for the pa20 case will change.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: Nelson H. F. Beebe <beebe@math.utah.edu>
Fixes: b7746b1194 ("hw/hppa/machine: Restrict the total memory size to 3GB")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Bruno Haible <bruno@clisp.org>
(cherry picked from commit 92039f61af)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The hypervisor can deliver (virtual) LPIs to a guest by setting up a
list register to have an intid which is an LPI. The GIC has to treat
these a little differently to standard interrupt IDs, because LPIs
have no Active state, and so the guest will only EOI them, it will
not also deactivate them. So icv_eoir_write() must do two things:
* if the LPI ID is not in any list register, we drop the
priority but do not increment the EOI count
* if the LPI ID is in a list register, we immediately deactivate
it, regardless of the split-drop-and-deactivate control
This can be seen in the VirtualWriteEOIR0() and VirtualWriteEOIR1()
pseudocode in the GICv3 architecture specification.
Without this fix, potentially a hypervisor guest might stall because
LPIs get stuck in a bogus Active+Pending state.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
(cherry picked from commit 82a65e3188)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 3d779abafe ("vfio/common: Introduce a global VFIODevice list")
introduced a global VFIODevice list, but forgot to update the list
element field name when iterating over the new list. Change the code
to use the correct list element field.
Fixes: 3d779abafe ("vfio/common: Introduce a global VFIODevice list")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2061
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
(cherry picked from commit 9353b6da43)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_path_get_basename() is a portable utility function that has the
advantage of not modifing the string argument. It also fixes a compile
breakage with the Musl C library reported in [1].
[1] https://lore.kernel.org/all/20231212010228.2701544-1-raj.khem@gmail.com/
Reported-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
(cherry picked from commit 213ae3ffda)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The edu_check_range function checks that start <= end1 < end2, where
end1 is the upper bound (exclusive) of the guest-supplied DMA range and
end2 is the upper bound (exclusive) of the device's allowed DMA range.
When the guest tries to transfer exactly DMA_SIZE (4096) bytes, end1
will be equal to end2, so the check fails and QEMU aborts with this
puzzling error message (newlines added for formatting):
qemu: hardware error: EDU: DMA range
0x0000000000040000-0x0000000000040fff out of bounds
(0x0000000000040000-0x0000000000040fff)!
By checking end1 <= end2 instead, guests will be allowed to transfer
exactly 4096 bytes. It is not necessary to explicitly check for
start <= end1 because the previous two checks (within(addr, start, end2)
and end1 > addr) imply start < end1.
Fixes: b30934cb52 ("hw: misc, add educational driver", 2015-01-21)
Signed-off-by: Max Erenberg <merenber@uwaterloo.ca>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 2c5107e1b4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Testing upstream U-Boot with 'sifive_u' machine we see:
=> dhcp
ethernet@10090000: PHY present at 0
Could not get PHY for ethernet@10090000: addr 0
phy_connect failed
This has been working till QEMU 8.1 but broken since QEMU 8.2.
Fixes: 1b09eeb122 ("hw/net/cadence_gem: use FIELD to describe PHYMNTNC register fields")
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 0c7ffc9771)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A CAN sja1000 standard frame filter mask has been computed and applied
incorrectly for standard frames when single Acceptance Filter Mode
(MOD_AFM = 1) has been selected. The problem has not been found
by Linux kernel testing because it uses dual filter mode (MOD_AFM = 0)
and leaves falters fully open.
The problem has been noticed by Grant Ramsay when testing with Zephyr
RTOS which uses single filter mode.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reported-by: Grant Ramsay <gramsay@enphaseenergy.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2028
Fixes: 733210e754 ("hw/net/can: SJA1000 chip register level emulation")
Message-ID: <20240103231426.5685-1-pisa@fel.cvut.cz>
(cherry picked from commit 25145a7d77)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The sgx_epc_get_section stub is reachable from cpu_x86_cpuid. It
should not assert, instead it should just return true just like
the "real" sgx_epc_get_section does when SGX is disabled.
Reported-by: Vladimír Beneš <vbenes@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20220201190941.106001-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 2196157404)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU would not start when trying to create two UFS host controllers and
a UFS logical unit for each with the following options:
-device ufs,id=bus0 \
-device ufs-lu,drive=drive1,bus=bus0,lun=0 \
-device ufs,id=bus1 \
-device ufs-lu,drive=drive2,bus=bus1,lun=0 \
This is because the same ID string ("0:0:0/scsi-disk") is generated
for both UFS logical units.
To fix this issue, prepend the parent pci device's path to make
the ID string unique.
("0000:00:03.0/0:0:0/scsi-disk" and "0000:00:04.0/0:0:0/scsi-disk")
Resolves: #2018
Fixes: 096434fea1 ("hw/ufs: Modify lu.c to share codes with SCSI subsystem")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231204150543.48252-1-akinobu.mita@gmail.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
The virtio-sound device is currently not migratable. QEMU crashes
on the source machine at some point during the migration with a
segmentation fault.
Even with this bug fixed, the virtio-sound device doesn't migrate
the state of the audio streams. For example, running streams leave
the device on the destination machine in a broken condition.
Mark the device as unmigratable until these issues have been fixed.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231204072837.6058-1-vr_qemu@t-online.de>
Keep it the same to vhost-user-blk.
At the same time, fix the vhost_reset_device.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20231123055431.217792-3-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the error occurs in vhost_dev_init, the value of s->connected is set to true
in advance, and there is no chance to enter this function execution again
in the future.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20231123055431.217792-2-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the rollback in msix_set_vector_notifiers(), original patch forgot to
undo msix_vector_poll_notifier pointer.
Fixes: bbef882cc1 ("msi: add API to get notified about pending bit poll")
Signed-off-by: Robert Hoo <robert.hoo.linux@gmail.com>
Message-Id: <20231113081349.1307-1-robert.hoo.linux@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The code already checks iommu_mr is not NULL so there is no
need to check container_of() is not NULL. Remove the check.
Fixes: CID 1523901
Fixes: 09b4c3d6a2 ("virtio-iommu: Record whether a probe request has
been issued")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Coverity (CID 1523901)
Message-Id: <20231109170715.259520-1-eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`kvm_enabled()` is compiled down to `0` and short-circuit logic is
used to remove references to undefined symbols at the compile stage.
Some build configurations with some compilers don't attempt to
simplify this logic down in some cases (the pattern appears to be
that the literal false must be the first term) and this was causing
some builds to emit references to undefined symbols.
An example of such a configuration is clang 16.0.6 with the following
configure: ./configure --enable-debug --without-default-features
--target-list=x86_64-softmmu --enable-tcg-interpreter
Signed-off-by: Daniel Hoffman <dhoff749@gmail.com>
Message-Id: <20231119203116.3027230-1-dhoff749@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
erst_realizefn() passes @errp to functions without checking for
failure. If it runs into another failure, it trips error_setv()'s
assertion.
Use the ERRP_GUARD() macro and check *errp, as suggested in commit
ae7c80a7bd ("error: New macro ERRP_GUARD()").
Cc: qemu-stable@nongnu.org
Fixes: f7e26ffa59 ("ACPI ERST: support for ACPI ERST feature")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231120130017.81286-1-philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
g_new() aborts if the allocation fails so it returns NULL only if the
requested allocation size is zero. register_vfs() makes such an
allocation if NumVFs is zero so it should not assert that g_new()
returns a non-NULL value.
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Buglink: https://issues.redhat.com/browse/RHEL-17209
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231123075630.12057-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Yanghang Liu<yanghliu@redhat.com>
Reviewed-by: Cédric Le Goater <<a href="mailto:clg@redhat.com" target="_blank">clg@redhat.com</a>><br>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU crashes on exit when a virtio-sound device has failed to
realise. Its vmstate field was not cleaned up properly with
qemu_del_vm_change_state_handler().
This patch changes the realize() order as
1. Validate the given configuration values (no resources allocated
by us either on success or failure)
2. Try AUD_register_card() and return on failure (no resources allocated
by us on failure)
3. Initialize vmstate, virtio device, heap allocations and stream
parameters at once.
If error occurs, goto error_cleanup label which calls
virtio_snd_unrealize(). This cleans up all resources made in steps
1-3.
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Fixes: 2880e676c0 ("Add virtio-sound device stub")
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231116072046.4002957-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
AUD_register_card might fail. Even though errp was passed as an
argument, the call's return value was not checked for failure.
Fixes: Coverity CID 1523899
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231109162034.2108018-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit b7639b7dd0 ("hw/audio: Simplify hda audio init") inverted
the sense of hda codec property mixer during initialization.
Change the code so that mixer=on enables the hda mixer emulation
and mixer=off disables the hda mixer emulation.
With this change audio playback and recording streams don't start
muted by default.
Fixes: b7639b7dd0 ("hw/audio: Simplify hda audio init")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231105172552.8405-2-vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After a relatively short time, there is an multiplication overflow
when multiplying (now - buft_start) with hda_bytes_per_second().
While the uptime now - buft_start only overflows after 2**63 ns
= 292.27 years, this happens hda_bytes_per_second() times faster
with the multiplication. At 44100 samples/s * 2 channels
* 2 bytes/channel = 176400 bytes/s that is 14.52 hours. After the
multiplication overflow the affected audio stream stalls.
Replace the multiplication and following division with muldiv64()
to prevent a multiplication overflow.
Fixes: 280c1e1cdb ("audio/hda: create millisecond timers that handle IO")
Reported-by: M_O_Bz <m_o_bz@163.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231105172552.8405-1-vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio sound device is currently an unclassified PCI device.
~> sudo lspci -s '00:02.0' -v -nn | head -n 2
00:02.0 Unclassified device [00ff]:
Red Hat, Inc. Device [1af4:1059] (rev 01)
Subsystem: Red Hat, Inc. Device [1af4:1100]
Set the correct PCI class code to change the device to a
multimedia audio controller.
~> sudo lspci -s '00:02.0' -v -nn | head -n 2
00:02.0 Multimedia audio controller [0401]:
Red Hat, Inc. Device [1af4:1059] (rev 01)
Subsystem: Red Hat, Inc. Device [1af4:1100]
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20231107185034.6434-1-vr_qemu@t-online.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The machine uses a modified U-Boot under GPL license but the sources
of it are lost with only a binary available so it cannot be included
in QEMU. Allow running without the firmware image which can be used
when calling a boot loader directly and thus simplifying booting
guests. We need a small routine that AmigaOS calls from ROM which is
added in this case to allow booting AmigaOS without external firmware
image.
Fixes: d9656f860a ("hw/ppc: Add emulation of AmigaOne XE board")
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Return default value in legacy mode for BAR4 when unset. This can't be
set in reset method because BARs are cleared on reset so we return it
instead when BARs are read in legacy mode. This fixes UDMA on amigaone
with AmigaOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20231125140135.AF6A075A4C3@zero.eik.bme.hu>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current implementation initializes the stack pointer of AVR devices
to 0. Although older AVR devices used to be like that, newer ones set
it to RAMEND.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1525
Signed-off-by: Gihun Nam <gihun.nam@outlook.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <PH0P222MB0010877445B594724D40C924DEBDA@PH0P222MB0010.NAMP222.PROD.OUTLOOK.COM>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This device is a function of VIA south bridge and should allow setting
interrupt routing within that chip. This is implemented in
via_isa_set_irq().
Fixes: eb604411a7
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <5329840e4be6dd8ae143d07cbfe61d8d2d106654.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The chip has 4 pins (called PIRQA-D in VT82C686B and PINTA-D in
VT8231) that are meant to be connected to PCI IRQ lines and allow
routing PCI interrupts to the ISA PIC. Route these in
via_isa_set_irq() to make it possible to share them with internal
functions that can also be routed to the same ISA IRQs.
Fixes: 2fdadd02e6
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <8c4513d8b78fac40e6d4e65a0a4b3a7f2f278a4b.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This device is part of a superio/ISA bridge chip and IRQs from it are
routed to an ISA interrupt. Use via_isa_set_irq() function to implement
this in a vt82c686-uhci-pci specific irq handler.
This reverts commit 422a6e8075.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <ed5cdeaba7cf01eebdaa35f84c63427f4d8876b1.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The VIA integrated south bridge chips combine several functions and
allow routing their interrupts to any of the ISA IRQs also allowing
multiple sources to share the same ISA IRQ. E.g. pegasos2 firmware
configures everything to use IRQ 9 but amigaone routes them to
separate ISA IRQs so the current simplified routing does not work.
Bring back via_isa_set_irq() and change it to take the component that
wants to change an IRQ and keep track of interrupt status of each
source separately and do the mapping to ISA IRQ within the ISA bridge.
This may not handle cases when an ISA IRQ is controlled by devices
directly, not going through via_isa_set_irq() such as serial, parallel
or keyboard but these IRQs being conventionally fixed are not likely
to be change by guests or share with other devices so this does not
cause a problem in practice.
This reverts commit 4e5a20b6da.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <1c3902d4166234bef0a476026441eaac3dd6cda5.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Passing an uninitialised list to visit_start_list() happens to work for
the QObject output visitor because it treats the pointer as an opaque
value and never dereferences it, but the string output visitor expects a
valid list to check if it has more than one element.
The existing code crashes with the string output visitor if the
uninitialised value is non-NULL. Passing an explicit NULL would fix the
crash, but still result in wrong output.
Rework get_prop_array() so that it conforms to the expectations that the
string output visitor has. This includes building a real list first and
using visit_next_list() to iterate it.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1993
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Dan Hoffman <dhoff749@gmail.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231121173416.346610-2-kwolf@redhat.com>
UG1087 states for the source channel that: if SIZE is programmed to 0, and the
DMA is started, the interrupts DONE and MEM_DONE will be asserted.
This implies that it is allowed for the guest to stop the source DMA by writing
a size of 0 to the SIZE register, so remove the LOG_GUEST_ERROR in that case.
While at it remove the comment marking the SIZE register as write-only.
See: https://docs.xilinx.com/r/en-US/ug1087-zynq-ultrascale-registers/CSUDMA_SRC_SIZE-CSUDMA-Register
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20231124143505.1493184-4-fkonrad@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It seems that the url changed a bit, and it triggers an error. Fix the URLs so
the documentation can be reached again.
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20231124143505.1493184-3-fkonrad@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
