Add support for disabling/enabling the "Counters" extension.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Remove the user version information. This was never used and never
publically exposed in a release of QEMU, so let's just remove it. In
future to manage versions we can extend the extension properties to
specify version.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Set the priv spec version 1.11.0 as the default and allow selecting it
via the command line.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
1.11 defines mcountinhibit, which has the same numeric CSR value as
mucounteren from 1.09.1 but has different semantics. This patch enables
the CSR for 1.11-based targets, which is trivial to implement because
the counters in QEMU never tick (legal according to the spec).
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Palmer: Fix counter access semantics, change commit message to indicate
the behavior is fully emulated.]
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
definitions.
-----BEGIN PGP SIGNATURE-----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=Bcc2
-----END PGP SIGNATURE-----
Merge tag 's390x-tcg-2019-06-21' into s390-next-staging
One fix for a tcg test case and two cleanups/refactorings of cpu feature
definitions.
# gpg: Signature made Fri 21 Jun 2019 03:37:37 PM CEST
# gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg: issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [full]
# gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
* tag 's390x-tcg-2019-06-21':
s390x/cpumodel: Prepend KDSA features with "KDSA"
s390x/cpumodel: Rework CPU feature definition
tests/tcg/s390x: Fix alignment of csst parameter list
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add support for the ratified RISC-V privledge spec.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Restructure the deprecated CPUs to make it clear in the code that these
are depreated. They are already marked as deprecated in
qemu-deprecated.texi. There are no functional changes.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The PMP check should be of the memory access size rather
than TARGET_PAGE_SIZE.
Signed-off-by: Hesham Almatary <Hesham.Almatary@cl.cam.ac.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The current implementation returns 1 (PMP check success) if the address is in
range even if the PMP entry is off. This is a bug.
For example, if there is a PMP check in S-Mode which is in range, but its PMP
entry is off, this will succeed, which it should not.
The patch fixes this bug by only checking the PMP permissions if the address is
in range and its corresponding PMP entry it not off. Otherwise, it will keep
the ret = -1 which will be checked and handled correctly at the end of the
function.
Signed-off-by: Hesham Almatary <Hesham.Almatary@cl.cam.ac.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The PMP should be checked when doing a page table walk, and report access
fault exception if the to-be-read PTE failed the PMP check.
Suggested-by: Jonathan Behrens <fintelia@gmail.com>
Signed-off-by: Hesham Almatary <Hesham.Almatary@cl.cam.ac.uk>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The current PMP check function checks for env->priv which is not the effective
memory privilege mode.
For example, mstatus.MPRV could be set while executing in M-Mode, and in that
case the privilege mode for the PMP check should be S-Mode rather than M-Mode
(in env->priv) if mstatus.MPP == PRV_S.
This patch passes the effective memory privilege mode to the PMP check.
Functions that call the PMP check should pass the correct memory privilege mode
after reading mstatus' MPRV/MPP or hstatus.SPRV (if Hypervisor mode exists).
Suggested-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Hesham Almatary <Hesham.Almatary@cl.cam.ac.uk>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Section 3.6 in RISC-V v1.10 privilege specification states that PMP violations
report "access exceptions." The current PMP implementation has
a bug which wrongly reports "page exceptions" on PMP violations.
This patch fixes this bug by reporting the correct PMP access exceptions
trap values.
Signed-off-by: Hesham Almatary <Hesham.Almatary@cl.cam.ac.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The current implementation unnecessarily checks for PMP even if MMU translation
failed. This may trigger a wrong PMP access exception instead of
a page exception.
For example, the very first instruction fetched after the first satp write in
S-Mode will trigger a PMP access fault instead of an instruction fetch page
fault.
This patch prioritises MMU exceptions over PMP exceptions and only checks for
PMP if MMU translation succeeds. This patch is required for future commits
that properly report PMP exception violations if PTW succeeds.
Signed-off-by: Hesham Almatary <Hesham.Almatary@cl.cam.ac.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch adds support for the riscv_cpu_unassigned_access call
and will raise a load or store access fault.
Signed-off-by: Michael Clark <mjc@sifive.com>
[Changes by AF:
- Squash two patches and rewrite commit message
- Set baddr to the access address
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
A wrong address is passed to `pmp_is_in_range` while checking if a
memory access is within a PMP range.
Since the ending address of the pmp range (i.e., pmp_state.addr[i].ea)
is set to the last address in the range (i.e., pmp base + pmp size - 1),
memory accesses containg the last address in the range will always fail.
For example, assume that a PMP range is 4KB from 0x87654000 such that
the last address within the range is 0x87654fff.
1-byte access to 0x87654fff should be considered to be fully inside the
PMP range.
However the access now fails and complains partial inclusion because
pmp_is_in_range(env, i, addr + size) returns 0 whereas
pmp_is_in_range(env, i, addr) returns 1.
Signed-off-by: Dayeol Lee <dayeol@berkeley.edu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch allows us to enable/disable the RISC-V ISA extensions from
the QEMU command line. This works with the rv32 and rv64 machines. The
idea is that in the future we can now add extensions and leave them
disabled by default until enabled by the user.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdDKeRAAoJENSXKoln91pl7OAH/30utWuYrfhakCN2AoYWo4ek
LrodEAQ01rdUBPC87v6no8MFm3ZqdcefOqZcm6OjBUhV5PCzIvb1LiayYNmcNTH6
eGZ5OYCLmR1IU32AeVQVqGDTt5yZMo6csdDVfNXIYmBdibJoqQ7np0wRik5ALQQE
+5dsEpzQ4GdTJp/2BggaYb67Mf0fnPCWstcw/iMuTrxBvyyyNFj88XTKq1SJVxAd
glFLw8iTVfFnsad9xINj/nkUfGKVGG5LTEjv/J0v6RmjWVD1TG5FPH1q4m6tX+Ey
pEY/C4QKl1quJnpQaAdMkfxb8yzKNtCV92f2Oti05/tYoW6BNTDt3GLtsz21j+Y=
=uL8C
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jun-21-2019' into staging
MIPS queue for June 21st, 2019
# gpg: Signature made Fri 21 Jun 2019 10:46:57 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-jun-21-2019:
target/mips: Fix emulation of ILVR.<B|H|W> on big endian host
target/mips: Fix emulation of ILVL.<B|H|W> on big endian host
target/mips: Fix emulation of ILVOD.<B|H|W> on big endian host
target/mips: Fix emulation of ILVEV.<B|H|W> on big endian host
tests/tcg: target/mips: Amend tests for MSA pack instructions
tests/tcg: target/mips: Include isa/ase and group name in test output
target/mips: Fix if-else-switch-case arms checkpatch errors in translate.c
target/mips: Fix some space checkpatch errors in translate.c
MAINTAINERS: Consolidate MIPS disassembler-related items
MAINTAINERS: Update file items for MIPS Malta board
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's handle it just like for other crypto features.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's define features at a single spot and make it less error prone to
define new features.
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Previous commits have added support for migration of nested virtualization
workloads. This was done by utilising two new KVM capabilities:
KVM_CAP_NESTED_STATE and KVM_CAP_EXCEPTION_PAYLOAD. Both which are
required in order to correctly migrate such workloads.
Therefore, change code to add a migration blocker for vCPUs exposed with
Intel VMX or AMD SVM in case one of these kernel capabilities is
missing.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Message-Id: <20190619162140.133674-11-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kernel commit c4f55198c7c2 ("kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD")
introduced a new KVM capability which allows userspace to correctly
distinguish between pending and injected exceptions.
This distinguish is important in case of nested virtualization scenarios
because a L2 pending exception can still be intercepted by the L1 hypervisor
while a L2 injected exception cannot.
Furthermore, when an exception is attempted to be injected by QEMU,
QEMU should specify the exception payload (CR2 in case of #PF or
DR6 in case of #DB) instead of having the payload already delivered in
the respective vCPU register. Because in case exception is injected to
L2 guest and is intercepted by L1 hypervisor, then payload needs to be
reported to L1 intercept (VMExit handler) while still preserving
respective vCPU register unchanged.
This commit adds support for QEMU to properly utilise this new KVM
capability (KVM_CAP_EXCEPTION_PAYLOAD).
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-10-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kernel commit 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
introduced new IOCTLs to extract and restore vCPU state related to
Intel VMX & AMD SVM.
Utilize these IOCTLs to add support for migration of VMs which are
running nested hypervisors.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Tested-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-9-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit d98f26073b ("target/i386: kvm: add VMX migration blocker")
added a migration blocker for vCPU exposed with Intel VMX.
However, migration should also be blocked for vCPU exposed with
AMD SVM.
Both cases should be blocked because QEMU should extract additional
vCPU state from KVM that should be migrated as part of vCPU VMState.
E.g. Whether vCPU is running in guest-mode or host-mode.
Fixes: d98f26073b ("target/i386: kvm: add VMX migration blocker")
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-6-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix emulation of ILVR.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-5-git-send-email-aleksandar.markovic@rt-rk.com>
Fix emulation of ILVL.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-4-git-send-email-aleksandar.markovic@rt-rk.com>
Fix emulation of ILVOD.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-3-git-send-email-aleksandar.markovic@rt-rk.com>
Fix emulation of ILVEV.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561038349-17105-2-git-send-email-aleksandar.markovic@rt-rk.com>
Remove some space-related checkpatch warning.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1561037595-14413-4-git-send-email-aleksandar.markovic@rt-rk.com>
If userspace (QEMU) debug guest, when #DB is raised in guest and
intercepted by KVM, KVM forwards information on #DB to userspace
instead of injecting #DB to guest.
While doing so, KVM don't update vCPU DR6 but instead report the #DB DR6
value to userspace for further handling.
See KVM's handle_exception() DB_VECTOR handler.
QEMU handler for this case is kvm_handle_debug(). This handler basically
checks if #DB is related to one of user set hardware breakpoints and if
not, it re-inject #DB into guest.
The re-injection is done by setting env->exception_injected to #DB which
will later be passed as events.exception.nr to KVM_SET_VCPU_EVENTS ioctl
by kvm_put_vcpu_events().
However, in case userspace re-injects #DB, KVM expects userspace to set
vCPU DR6 as reported to userspace when #DB was intercepted! Otherwise,
KVM_REQ_EVENT handler will inject #DB with wrong DR6 to guest.
Fix this issue by updating vCPU DR6 appropriately when re-inject #DB to
guest.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-5-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform
arch-dependent initialisation, introduce kvm_arch_destroy_vcpu()
to be called from kvm_destroy_vcpu() to perform arch-dependent
destruction.
This was added because some architectures (Such as i386)
currently do not free memory that it have allocated in
kvm_arch_init_vcpu().
Suggested-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-3-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit d98f26073b ("target/i386: kvm: add VMX migration blocker")
added migration blocker for vCPU exposed with Intel VMX because QEMU
doesn't yet contain code to support migration of nested virtualization
workloads.
However, that commit missed adding deletion of the migration blocker in
case init of vCPU failed. Similar to invtsc_mig_blocker. This commit fix
that issue.
Fixes: d98f26073b ("target/i386: kvm: add VMX migration blocker")
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Message-Id: <20190619162140.133674-2-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR IA32_CORE_CAPABILITY is a feature-enumerating MSR, which only
enumerates the feature split lock detection (via bit 5) by now.
The existence of MSR IA32_CORE_CAPABILITY is enumerated by CPUID.7_0:EDX[30].
The latest kernel patches about them can be found here:
https://lkml.org/lkml/2019/4/24/1909
Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Message-Id: <20190617153654.916-1-xiaoyao.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V on KVM can only use Synthetic timers with Direct Mode (opting for
an interrupt instead of VMBus message). This new capability is only
announced in KVM_GET_SUPPORTED_HV_CPUID.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enlightened VMCS is enabled by writing to a field in VP assist page and
these require virtual APIC.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Synthetic timers operate in hv-time time and Windows won't use these
without SynIC.
Add .dependencies field to kvm_hyperv_properties[] and a generic mechanism
to check dependencies between features.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In many case we just want to give Windows guests all currently supported
Hyper-V enlightenments and that's where this new mode may come handy. We
pass through what was returned by KVM_GET_SUPPORTED_HV_CPUID.
hv_cpuid_check_and_set() is modified to also set cpu->hyperv_* flags as
we may want to check them later (and we actually do for hv_runtime,
hv_synic,...).
'hv-passthrough' is a development only feature, a migration blocker is
added to prevent issues while migrating between hosts with different
feature sets.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's consolidate Hyper-V features handling in hyperv_handle_properties().
The change is necessary to support 'hv-passthrough' mode as we'll be just
copying CPUIDs from KVM instead of filling them in.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM now supports reporting supported Hyper-V features through CPUID
(KVM_GET_SUPPORTED_HV_CPUID ioctl). Going forward, this is going to be
the only way to announce new functionality and this has already happened
with Direct Mode stimers.
While we could just support KVM_GET_SUPPORTED_HV_CPUID for new features,
it seems to be beneficial to use it for all Hyper-V enlightenments when
possible. This way we can implement 'hv-all' pass-through mode giving the
guest all supported Hyper-V features even when QEMU knows nothing about
them.
Implementation-wise we create a new kvm_hyperv_properties structure
defining Hyper-V features, get_supported_hv_cpuid()/
get_supported_hv_cpuid_legacy() returning the supported CPUID set and
a bit over-engineered hv_cpuid_check_and_set() which we will also be
used to set cpu->hyperv_* properties for 'hv-all' mode.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Representing Hyper-V properties as bits will allow us to check features
and dependencies between them in a natural way.
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU tracks whether a vcpu is halted using CPUState::halted. E.g.,
after initialization or reset, halted is 0 for the BSP (vcpu 0)
and 1 for the APs (vcpu 1, 2, ...). A halted vcpu should not be
handed to the hypervisor to run (e.g. hax_vcpu_run()).
Under HAXM, Android Emulator sometimes boots into a "vcpu shutdown
request" error while executing in SeaBIOS, with the HAXM driver
logging a guest triple fault in vcpu 1, 2, ... at RIP 0x3. That is
ultimately because the HAX accelerator asks HAXM to run those APs
when they are still in the halted state.
Normally, the vcpu thread for an AP will start by looping in
qemu_wait_io_event(), until the BSP kicks it via a pair of IPIs
(INIT followed by SIPI). But because the HAX accelerator does not
honor cpu->halted, it allows the AP vcpu thread to proceed to
hax_vcpu_run() as soon as it receives any kick, even if the kick
does not come from the BSP. It turns out that emulator has a
worker thread which periodically kicks every vcpu thread (possibly
to collect CPU usage data), and if one of these kicks comes before
those by the BSP, the AP will start execution from the wrong RIP,
resulting in the aforementioned SMP boot failure.
The solution is inspired by the KVM accelerator (credit to
Chuanxiao Dong <chuanxiao.dong@intel.com> for the pointer):
1. Get rid of questionable logic that unconditionally resets
cpu->halted before hax_vcpu_run(). Instead, only reset it at the
right moments (there are only a few "unhalt" events).
2. Add a check for cpu->halted before hax_vcpu_run().
Note that although the non-Unrestricted Guest (!ug_platform) code
path also forcibly resets cpu->halted, it is left untouched,
because only the UG code path supports SMP guests.
The patch is first merged to android emulator with Change-Id:
I9c5752cc737fd305d7eace1768ea12a07309d716
Cc: Yu Ning <yu.ning@intel.com>
Cc: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Message-Id: <20190610021939.13669-1-colin.xu@intel.com>
In commit 1120827fa1 we accidentally put the
"UNDEF unless FPU has double-precision support" check in
the single-precision VFM function. Put it in the dp
function where it belongs.
Fixes: 1120827fa1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190617160130.3207-1-peter.maydell@linaro.org
The architecture permits FPUs which have only single-precision
support, not double-precision; Cortex-M4 and Cortex-M33 are
both like that. Add the necessary checks on the MVFR0 FPDP
field so that we UNDEF any double-precision instructions on
CPUs like this.
Note that even if FPDP==0 the insns like VMOV-to/from-gpreg,
VLDM/VSTM, VLDR/VSTR which take double precision registers
still exist.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190614104457.24703-3-peter.maydell@linaro.org
In several places cut and paste errors meant we were using the wrong
type for the 'arg' struct in trans_ functions called by the
decodetree decoder, because we were using the _sp version of the
struct in the _dp function. These were harmless, because the two
structs were identical and so decodetree made them typedefs of the
same underlying structure (and we'd have had a compile error if they
were not harmless), but we should clean them up anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190614104457.24703-2-peter.maydell@linaro.org
Remove the now unused TCG globals cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d.
cpu_M0 is still used by the iwmmxt code, and cpu_V0 and
cpu_V1 are used by both iwmmxt and Neon.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-13-peter.maydell@linaro.org
Remove some old constructns from NEON_2RM_VCVT_F16_F32 code:
* don't use CPU_F0s
* don't use tcg_gen_st_f32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-12-peter.maydell@linaro.org
Remove some old constructs from NEON_2RM_VCVT_F16_F32 code:
* don't use cpu_F0s
* don't use tcg_gen_ld_f32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-11-peter.maydell@linaro.org
Stop using cpu_F0s in the Neon VCVT fixed-point operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-10-peter.maydell@linaro.org
Stop using cpu_F0s for the Neon f32/s32 VCVT operations.
Since this is the last user of cpu_F0s in the Neon 2rm-op
loop, we can remove the handling code for it too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-9-peter.maydell@linaro.org
Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-8-peter.maydell@linaro.org
Stop using cpu_F0s for the NEON_2RM_VCVT[ANPM][US] ops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-7-peter.maydell@linaro.org
Switch NEON_2RM_VRINT* away from using cpu_F0s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-6-peter.maydell@linaro.org
Switch NEON_2RM_VABS_F away from using cpu_F0s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-5-peter.maydell@linaro.org
Where Neon instructions are floating point operations, we
mostly use the old VFP utility functions like gen_vfp_abs()
which work on the TCG globals cpu_F0s and cpu_F1s. The
Neon for-each-element loop conditionally loads the inputs
into either a plain old TCG temporary for most operations
or into cpu_F0s for float operations, and similarly stores
back either cpu_F0s or the temporary.
Switch NEON_2RM_VABS_F away from using cpu_F0s, and
update neon_2rm_is_float_op() accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-4-peter.maydell@linaro.org
The AArch32 VMOV (immediate) instruction uses the same VFP encoded
immediate format we already handle in vfp_expand_imm(). Use that
function rather than hand-decoding it.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-3-peter.maydell@linaro.org
We want to use vfp_expand_imm() in the AArch32 VFP decode;
move it from the a64-only header/source file to the
AArch32 one (which is always compiled even for AArch64).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-2-peter.maydell@linaro.org
Allow the DSP extension to be disabled via a CPU property for
M-profile CPUs. (A and R-profile CPUs don't have this extension
as a defined separate optional architecture extension, so
they don't need the property.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-3-peter.maydell@linaro.org
Allow VFP and neon to be disabled via a CPU property. As with
the "pmu" property, we only allow these features to be removed
from CPUs which have it by default, not added to CPUs which
don't have it.
The primary motivation here is to be able to optionally
create Cortex-M33 CPUs with no FPU, but we provide switches
for both VFP and Neon because the two interact:
* AArch64 can't have one without the other
* Some ID register fields only change if both are disabled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-2-peter.maydell@linaro.org
For VFP short vectors, the VFP registers are divided into a
series of banks: for single-precision these are s0-s7, s8-s15,
s16-s23 and s24-s31; for double-precision they are d0-d3,
d4-d7, ... d28-d31. Some banks are "scalar" meaning that
use of a register within them triggers a pure-scalar or
mixed vector-scalar operation rather than a full vector
operation. The scalar banks are s0-s7, d0-d3 and d16-d19.
When using a bank as part of a vector operation, we
iterate through it, increasing the register number by
the specified stride each time, and wrapping around to
the beginning of the bank.
Unfortunately our calculation of the "increment" part of this
was incorrect:
vd = ((vd + delta_d) & (bank_mask - 1)) | (vd & bank_mask)
will only do the intended thing if bank_mask has exactly
one set high bit. For instance for doubles (bank_mask = 0xc),
if we start with vd = 6 and delta_d = 2 then vd is updated
to 12 rather than the intended 4.
This only causes problems in the unlikely case that the
starting register is not the first in its bank: if the
register number doesn't have to wrap around then the
expression happens to give the right answer.
Fix this bug by abstracting out the "check whether register
is in a scalar bank" and "advance register within bank"
operations to utility functions which use the right
bit masking operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the float-to-integer VCVT instructions to decodetree.
Since these are the last unconverted instructions, we can
delete the old decoder structure entirely now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVT (between floating-point and fixed-point) instructions
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VJCVT instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVT integer-to-float instructions to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVT double/single precision conversion insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP round-to-integer instructions VRINTR, VRINTZ and
VRINTX to decodetree.
These instructions were only introduced as part of the "VFP misc"
additions in v8A, so we check this. The old decoder's implementation
was incorrectly providing them even for v7A CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVTT and VCVTB instructions which convert from
f32 and f64 to f16 to decodetree.
Since we're no longer constrained to the old decoder's style
using cpu_F0s and cpu_F0d we can perform a direct 16 bit
store of the right half of the input single-precision register
rather than doing a load/modify/store sequence on the full
32 bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVTT, VCVTB instructions that deal with conversion
from half-precision floats to f32 or 64 to decodetree.
Since we're no longer constrained to the old decoder's style
using cpu_F0s and cpu_F0d we can perform a direct 16 bit
load of the right half of the input single-precision register
rather than loading the full 32 bits and then doing a
separate shift or sign-extension.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP comparison instructions to decodetree.
Note that comparison instructions should not honour the VFP
short-vector length and stride information: they are scalar-only
operations. This applies to all the 2-operand instructions except
for VMOV, VABS, VNEG and VSQRT. (In the old decoder this is
implemented via the "if (op == 15 && rn > 3) { veclen = 0; }" check.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VSQRT instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VNEG instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VABS instruction to decodetree.
Unlike the 3-op versions, we don't pass fpst to the VFPGen2OpSPFn or
VFPGen2OpDPFn because none of the operations which use this format
and support short vectors will need it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VMOV (immediate) instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP fused multiply-add instructions (VFNMA, VFNMS,
VFMA, VFMS) to decodetree.
Note that in the old decode structure we were implementing
these to honour the VFP vector stride/length. These instructions
were introduced in VFPv4, and in the v7A architecture they
are UNPREDICTABLE if the vector stride or length are non-zero.
In v8A they must UNDEF if stride or length are non-zero, like
all VFP instructions; we choose to UNDEF always.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VDIV instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VSUB instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VADD instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VNMUL instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VMUL instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VNMLA instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VNMLS instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VMLS instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VMLA instruction to decodetree.
This is the first of the VFP 3-operand data processing instructions,
so we include in this patch the code which loops over the elements
for an old-style VFP vector operation. The existing code to do this
looping uses the deprecated cpu_F0s/F0d/F1s/F1d TCG globals; since
we are going to be converting instructions one at a time anyway
we can take the opportunity to make the new loop use TCG temporaries,
which means we can do that conversion one operation at a time
rather than needing to do it all in one go.
We include an UNDEF check which was missing in the old code:
short-vector operations (with stride or length non-zero) were
deprecated in v7A and must UNDEF in v8A, so if the MVFR0 FPShVec
field does not indicate that support for short vectors is present
we UNDEF the operations that would use them. (This is a change
of behaviour for Cortex-A7, Cortex-A15 and the v8 CPUs, which
previously were all incorrectly allowing short-vector operations.)
Note that the conversion fixes a bug in the old code for the
case of VFP short-vector "mixed scalar/vector operations". These
happen where the destination register is in a vector bank but
but the second operand is in a scalar bank. For example
vmla.f64 d10, d1, d16 with length 2 stride 2
is equivalent to the pair of scalar operations
vmla.f64 d10, d1, d16
vmla.f64 d8, d3, d16
where the destination and first input register cycle through
their vector but the second input is scalar (d16). In the
old decoder the gen_vfp_F1_mul() operation uses cpu_F1{s,d}
as a temporary output for the multiply, which trashes the
second input operand. For the fully-scalar case (where we
never do a second iteration) and the fully-vector case
(where the loop loads the new second input operand) this
doesn't matter, but for the mixed scalar/vector case we
will end up using the wrong value for later loop iterations.
In the new code we use TCG temporaries and so avoid the bug.
This bug is present for all the multiply-accumulate insns
that operate on short vectors: VMLA, VMLS, VNMLA, VNMLS.
Note 2: the expression used to calculate the next register
number in the vector bank is not in fact correct; we leave
this behaviour unchanged from the old decoder and will
fix this bug later in the series.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Expand out the sequences in the new decoder VLDR/VSTR/VLDM/VSTM trans
functions which perform the memory accesses by going via the TCG
globals cpu_F0s and cpu_F0d, to use local TCG temps instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP load/store multiple insns to decodetree.
This includes tightening up the UNDEF checking for pre-VFPv3
CPUs which only have D0-D15 : they now UNDEF for any access
to D16-D31, not merely when the smallest register in the
transfer list is in D16-D31.
This conversion does not try to share code between the single
precision and the double precision versions; this looks a bit
duplicative of code, but it leaves the door open for a future
refactoring which gets rid of the use of the "F0" registers
by inlining the various functions like gen_vfp_ld() and
gen_mov_F0_reg() which are hiding "if (dp) { ... } else { ... }"
conditionalisation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP single load/store insns VLDR and VSTR to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP two-register transfer instructions to decodetree
(in the v8 Arm ARM these are the "Advanced SIMD and floating-point
64-bit move" encoding group).
Again, we expand out the sequences involving gen_vfp_msr() and
gen_msr_vfp().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the "single-precision" register moves to decodetree:
* VMSR
* VMRS
* VMOV between general purpose register and single precision
Note that the VMSR/VMRS conversions make our handling of
the "should this UNDEF?" checks consistent between the two
instructions:
* VMSR to MVFR0, MVFR1, MVFR2 now UNDEF from EL0
(previously was a nop)
* VMSR to FPSID now UNDEFs from EL0 or if VFPv3 or better
(previously was a nop)
* VMSR to FPINST and FPINST2 now UNDEF if VFPv3 or better
(previously would write to the register, which had no
guest-visible effect because we always UNDEF reads)
We also tighten up the decode: we were previously underdecoding
some SBZ or SBO bits.
The conversion of VMOV_single includes the expansion out of the
gen_mov_F0_vreg()/gen_vfp_mrs() and gen_mov_vreg_F0()/gen_vfp_msr()
sequences into the simpler direct load/store of the TCG temp via
neon_{load,store}_reg32(): we know in the new function that we're
always single-precision, we don't need to use the old-and-deprecated
cpu_F0* TCG globals, and we don't happen to have the declaration of
gen_vfp_msr() and gen_vfp_mrs() at the point in the file where the
new function is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the "double-precision" register moves to decodetree:
this covers VMOV scalar-to-gpreg, VMOV gpreg-to-scalar and VDUP.
Note that the conversion process has tightened up a few of the
UNDEF encoding checks: we now correctly forbid:
* VMOV-to-gpr with U:opc1:opc2 == 10x00 or x0x10
* VMOV-from-gpr with opc1:opc2 == 0x10
* VDUP with B:E == 11
* VDUP with Q == 1 and Vn<0> == 1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
The accesses of elements < 32 bits could be improved by doing
direct ld/st of the right size rather than 32-bit read-and-shift
or read-modify-write, but we leave this for later cleanup,
since this series is generally trying to stick to fixing
the decode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The current VFP code has two different idioms for
loading and storing from the VFP register file:
1 using the gen_mov_F0_vreg() and similar functions,
which load and store to a fixed set of TCG globals
cpu_F0s, CPU_F0d, etc
2 by direct calls to tcg_gen_ld_f64() and friends
We want to phase out idiom 1 (because the use of the
fixed globals is a relic of a much older version of TCG),
but idiom 2 is quite longwinded:
tcg_gen_ld_f64(tmp, cpu_env, vfp_reg_offset(true, reg))
requires us to specify the 64-bitness twice, once in
the function name and once by passing 'true' to
vfp_reg_offset(). There's no guard against accidentally
passing the wrong flag.
Instead, let's move to a convention of accessing 64-bit
registers via the existing neon_load_reg64() and
neon_store_reg64(), and provide new neon_load_reg32()
and neon_store_reg32() for the 32-bit equivalents.
Implement the new functions and use them in the code in
translate-vfp.inc.c. We will convert the rest of the VFP
code as we do the decodetree conversion in subsequent
commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the trans_*() functions we've just created from translate.c
to translate-vfp.inc.c. This is pure code motion with no textual
changes (this can be checked with 'git show --color-moved').
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVTA/VCVTN/VCVTP/VCVTM instructions to decodetree.
trans_VCVT() is temporarily left in translate.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VRINTA/VRINTN/VRINTP/VRINTM instructions to decodetree.
Again, trans_VRINT() is temporarily left in translate.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VMINNM and VMAXNM instructions to decodetree.
As with VSEL, we leave the trans_VMINMAXNM() function
in translate.c for the moment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VSEL instructions to decodetree.
We leave trans_VSEL() in translate.c for now as this allows
the patch to show just the changes from the old handle_vsel().
In the old code the check for "do D16-D31 exist" was hidden in
the VFP_DREG macro, and assumed that VFPv3 always implied that
D16-D31 exist. In the new code we do the correct ID register test.
This gives identical behaviour for most of our CPUs, and fixes
previously incorrect handling for Cortex-R5F, Cortex-M4 and
Cortex-M33, which all implement VFPv3 or better with only 16
double-precision registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
At the moment our -cpu max for AArch32 supports VFP short-vectors
because we always implement them, even for CPUs which should
not have them. The following commits are going to switch to
using the correct ID-register-check to enable or disable short
vector support, so we need to turn it on explicitly for -cpu max,
because Cortex-A15 doesn't implement it.
We don't enable this for the AArch64 -cpu max, because the v8A
architecture never supports short-vectors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Cortex-R5F initfn was not correctly setting up the MVFR
ID register values. Fill these in, since some subsequent patches
will use ID register checks rather than CPU feature bit checks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Factor out the VFP access checking code so that we can use it in the
leaf functions of the decodetree decoder.
We call the function full_vfp_access_check() so we can keep
the more natural vfp_access_check() for a version which doesn't
have the 'ignore_vfp_enabled' flag -- that way almost all VFP
insns will be able to use vfp_access_check(s) and only the
special-register access function will have to use
full_vfp_access_check(s, ignore_vfp_enabled).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add the infrastructure for building and invoking a decodetree decoder
for the AArch32 VFP encodings. At the moment the new decoder covers
nothing, so we always fall back to the existing hand-written decode.
We need to have one decoder for the unconditional insns and one for
the conditional insns, as otherwise the patterns for conditional
insns would incorrectly match against the unconditional ones too.
Since translate.c is over 14,000 lines long and we're going to be
touching pretty much every line of the VFP code as part of the
decodetree conversion, we create a new translate-vfp.inc.c to hold
the code which deals with VFP in the new scheme. It should be
possible to convert this into a standalone translation unit
eventually, but the conversion process will be much simpler if we
simply #include it midway through translate.c to start with.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The ARM pseudocode installs the error_code into the original
pointer, not the encrypted pointer. The difference applies
within the 7 bits of pac data; the result should be the sign
extension of bit 55.
Add a testcase to that effect.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The NSACR register allows secure code to configure the FPU
to be inaccessible to non-secure code. If the NSACR.CP10
bit is set then:
* NS accesses to the FPU trap as UNDEF (ie to NS EL1 or EL2)
* CPACR.{CP10,CP11} behave as if RAZ/WI
* HCPTR.{TCP11,TCP10} behave as if RAO/WI
Note that we do not implement the NSACR.NSASEDIS bit which
gates only access to Advanced SIMD, in the same way that
we don't implement the equivalent CPACR.ASEDIS and HCPTR.TASE.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190510110357.18825-1-peter.maydell@linaro.org
This replaces 3 target-specific implementations for BIT, BIF, and BSL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190518191934.21887-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is ostensibly to avoid the weirdness of len looking like it might
come from a guest and sometimes being used. While we are at it fix up
the error checking for the arm-linux-user implementation of the API
which got flagged up by Coverity (CID 1401700).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Next pull request against qemu-4.1. The big thing here is adding
support for hot plug of P2P bridges, and PCI devices under P2P bridges
on the "pseries" machine (which doesn't use SHPC). Other than that
there's just a handful of fixes and small enhancements.
-----BEGIN PGP SIGNATURE-----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=ERgu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190612' into staging
ppc patch queue 2019-06-12
Next pull request against qemu-4.1. The big thing here is adding
support for hot plug of P2P bridges, and PCI devices under P2P bridges
on the "pseries" machine (which doesn't use SHPC). Other than that
there's just a handful of fixes and small enhancements.
# gpg: Signature made Wed 12 Jun 2019 06:47:56 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190612:
ppc/xive: Make XIVE generate the proper interrupt types
ppc/pnv: activate the "dumpdtb" option on the powernv machine
target/ppc: Use tcg_gen_gvec_bitsel
spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges
spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge
spapr: Don't use bus number for building DRC ids
spapr: Clean up DRC index construction
spapr: Clean up spapr_drc_populate_dt()
spapr: Clean up dt creation for PCI buses
spapr: Clean up device tree construction for PCI devices
spapr: Clean up device node name generation for PCI devices
target/ppc: Fix lxvw4x, lxvh8x and lxvb16x
spapr_pci: Improve error message
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 58ea30f514 "Clean up header guards that don't match their file
name" messed up contrib/elf2dmp/qemu_elf.h and
tests/migration/migration-test.h.
It missed target/cris/opcode-cris.h and
tests/uefi-test-tools/UefiTestToolsPkg/Include/Guid/BiosTablesTest.h
due to the scripts/clean-header-guards.pl bug fixed in the previous
commit.
Commit a8b991b52d "Clean up ill-advised or unusual header guards"
missed include/hw/xen/io/ring.h for the same reason.
Commit 3979fca4b6 "disas: Rename include/disas/bfd.h back to
include/disas/dis-asm.h" neglected to update the guard symbol for the
rename.
Commit a331c6d774 "semihosting: implement a semihosting console"
created include/hw/semihosting/console.h with an ill-advised guard
symbol.
Clean them up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is the common header guard idiom:
/*
* File comment
*/
#ifndef GUARD_SYMBOL_H
#define GUARD_SYMBOL_H
... actual contents ...
#endif
A few of our headers have some #include before the guard.
target/tilegx/spr_def_64.h has #ifndef __DOXYGEN__ outside the guard.
A few more have the #define elsewhere.
Change them to match the common idiom. For spr_def_64.h, that means
dropping #ifndef __DOXYGEN__. While there, rename guard symbols to
make scripts/clean-header-guards.pl happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-2-armbru@redhat.com>
[Rebased with conflicts resolved automatically]
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Replace the target-specific implementation of XXSEL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190603164927.8336-1-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
During the conversion these instructions were incorrectly treated as
stores. We need to use set_cpu_vsr* and not get_cpu_vsr*.
Fixes: 8b3b2d75c7 ("introduce get_cpu_vsr{l,h}() and set_cpu_vsr{l,h}() helpers for VSR register access")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190524065345.25591-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
i386 (32 bit) emulation uses EFER in wrmsr and in MMU fault
processing.
But it does not included in VMState, because "efer" field is disabled with
This patch adds a section for 32-bit targets which saves EFER when
it's value is non-zero.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <155913371654.8429.1659082639780315242.stgit@pasha-Precision-3630-Tower>
Reviewed-by: Peter Xu <peterx@redhat.com>
[ehabkost: indentation fix]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a "unavailable-features" QOM property to X86CPU objects that
have the same semantics of "unavailable-features" on
query-cpu-definitions. The new property has the same goal of
"filtered-features", but is generic enough to let any kind of CPU
feature to be listed there without relying on low level details
like CPUID leaves or MSR numbers.
Message-Id: <20190422234742.15780-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Extract feature name listing code from
x86_cpu_class_check_missing_features(). It will be reused to
return information about CPU filtered features at runtime.
Message-Id: <20190422234742.15780-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This macro is now always empty, so remove it. This leaves the
entire contents of CPUArchState under the control of the guest
architecture.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Consolidate some boilerplate from foo_cpu_initfn.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have ArchCPU, we can define this generically,
in the one place that needs it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace xtensa_env_get_cpu with env_archcpu. The combination
CPU(xtensa_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Move cpu_get_tb_cpu_state below the include of "exec/cpu-all.h"
so that the definition of env_cpu is available.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace uc32_env_get_cpu with env_archcpu. The combination
CPU(uc32_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace tricore_env_get_cpu with env_archcpu. The combination
CPU(tricore_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace tilegx_env_get_cpu with env_archcpu. The combination
CPU(tilegx_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace sparc_env_get_cpu with env_archcpu. The combination
CPU(sparc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace sh_env_get_cpu with env_archcpu. The combination
CPU(sh_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace s390_env_get_cpu with env_archcpu. The combination
CPU(s390_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace riscv_env_get_cpu with env_archcpu. The combination
CPU(riscv_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace ppc_env_get_cpu with env_archcpu. The combination
CPU(ppc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace openrisc_env_get_cpu with env_archcpu. The combination
CPU(openrisc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace nios2_env_get_cpu with env_archcpu. The combination
CPU(nios2_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace moxie_env_get_cpu with env_archcpu. The combination
CPU(moxie_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace mips_env_get_cpu with env_archcpu. The combination
CPU(mips_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace mb_env_get_cpu with env_archcpu. The combination
CPU(mb_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Move cpu_mmu_index below the include of "exec/cpu-all.h",
so that the definition of env_archcpu is available.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
The combination CPU(m68k_env_get_cpu) should have used
ENV_GET_CPU to begin; use env_cpu now.
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace lm32_env_get_cpu with env_archcpu. The combination
CPU(lm32_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace x86_env_get_cpu with env_archcpu. The combination
CPU(x86_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace hppa_env_get_cpu with env_archcpu. The combination
CPU(hppa_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace cris_env_get_cpu with env_archcpu. The combination
CPU(cris_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix all of the coding style errors in this file at once.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix all of the coding style errors in this file at once.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace arm_env_get_cpu with env_archcpu. The combination
CPU(arm_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
