Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.
(target/ was cleaned from invalid CONFIG_SOFTMMU uses at
commit cab35c73be, but these files were merged few days
after, thus missed the cleanup.)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004082239.27251-1-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hvf_get_supported_cpuid() is only defined for x86 targets
(in target/i386/hvf/x86_cpuid.c).
Its declaration is pointless on all other targets.
All the calls to it in target/i386/cpu.c are guarded by
a call on hvf_enabled(), so are elided when HVF is not
built in. Therefore we can remove the unnecessary function
stub.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004092510.39498-3-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only non standard type -- CPUArchState -- is forward
declared in "qemu/typedefs.h", so no particular header is
required here.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20231004092510.39498-2-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function is now empty, so remove it. In the case of
m68k and tricore, this empties the class instance initfn,
so remove those as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Retain the separate structure to emphasize its importance.
Enforce CPUArchState always follows CPUState without padding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The omission of alignment has technically been wrong since
269bd5d8f6, where QEMU_ALIGNED was added to CPUTLBDescFast.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Inherit the size and alignment from TYPE_ARM_CPU.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TARGET_PAGE_ENTRY_EXTRA is a macro that allows guests to specify additional
fields for caching with the full TLB entry. This macro is replaced with
a union in CPUTLBEntryFull, thus making CPUTLB target-agnostic at the
cost of slightly inflated CPUTLBEntryFull for non-arm guests.
Note, this is needed to ensure that fields in CPUTLB don't vary in
offset between various targets.
(arm is the only guest actually making use of this feature.)
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-2-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel_cpu_realize() is a generic function working with CPUs
from any target. Rename it using '_common_' to emphasis it is
not target specific.
Suggested-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231003123026.99229-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The AccelCPUClass::cpu_realizefn handler is meant for target
specific code, rename it using '_target_' to emphasis it.
Suggested-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231003123026.99229-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the '*fn' suffix for handlers, this is a public method.
Drop the suffix.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20231003123026.99229-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Bugs love to hide in such code.
Evidence: "[PATCH v3 1/7] migration/rdma: Fix save_page method to fail
on polling error".
This patch removes the local variable shadowing. Tested by adding:
--extra-cflags='-Wshadow=local -Wno-error=shadow=local -Wno-error=shadow=compatible-local'
To configure
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925043023.71448-4-alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Bugs love to hide in such code.
Evidence: "[PATCH v3 1/7] migration/rdma: Fix save_page method to fail
on polling error".
This patch removes the local variable shadowing. Tested by adding:
--extra-cflags='-Wshadow=local -Wno-error=shadow=local -Wno-error=shadow=compatible-local'
To configure
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925043023.71448-3-alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
target/mips/tcg/nanomips_translate.c.inc:4410:33: error: declaration shadows a local variable [-Werror,-Wshadow]
int32_t imm = extract32(ctx->opcode, 1, 13) |
^
target/mips/tcg/nanomips_translate.c.inc:3577:9: note: previous declaration is here
int imm;
^
target/mips/tcg/translate.c:15578:19: error: declaration shadows a local variable [-Werror,-Wshadow]
for (unsigned i = 1; i < 32; i++) {
^
target/mips/tcg/translate.c:15567:9: note: previous declaration is here
int i;
^
target/mips/tcg/msa_helper.c:7478:13: error: declaration shadows a local variable [-Werror,-Wshadow]
MSA_FLOAT_MAXOP(pwx->w[0], min, pws->w[0], pws->w[0], 32);
^
target/mips/tcg/msa_helper.c:7434:23: note: expanded from macro 'MSA_FLOAT_MAXOP'
float_status *status = &env->active_tc.msa_fp_status;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-5-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Per Peter Maydell analysis [*]:
The hvf_vcpu_exec() function is not documented, but in practice
its caller expects it to return either EXCP_DEBUG (for "this was
a guest debug exception you need to deal with") or something else
(presumably the intention being 0 for OK).
The hvf_sysreg_read() and hvf_sysreg_write() functions are also not
documented, but they return 0 on success, or 1 for a completely
unrecognized sysreg where we've raised the UNDEF exception (but
not if we raised an UNDEF exception for an unrecognized GIC sysreg --
I think this is a bug). We use this return value to decide whether
we need to advance the PC past the insn or not. It's not the same
as the return value we want to return from hvf_vcpu_exec().
Retain the variable as locally scoped but give it a name that
doesn't clash with the other function-scoped variable.
This fixes:
target/arm/hvf/hvf.c:1936:13: error: declaration shadows a local variable [-Werror,-Wshadow]
int ret = 0;
^
target/arm/hvf/hvf.c:1807:9: note: previous declaration is here
int ret;
^
[*] https://lore.kernel.org/qemu-devel/CAFEAcA_e+fU6JKtS+W63wr9cCJ6btu_hT_ydZWOwC0kBkDYYYQ@mail.gmail.com/
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-4-philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
as this is an effective address and those cannot be signed,
it should not be a signed integer.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20230913105326.40832-11-kbastian@mail.uni-paderborn.de>
these are already defined in 'csfr.h.inc'. We don't need to duplicate
these registers.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20230913105326.40832-10-kbastian@mail.uni-paderborn.de>
Require i/o as the last insn of a TranslationBlock always,
not only with icount. This is required for i/o that alters
the address space, such as a pci config space write.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1866
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
we would crash if width was 0 for these insns, as tcg_gen_deposit() is
undefined for that case. For TriCore, width = 0 is a mov from the src reg
to the dst reg, so we special case this here.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20230828112651.522058-9-kbastian@mail.uni-paderborn.de>
this is not something other ISAs do, so clarify it with a comment.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20230828112651.522058-6-kbastian@mail.uni-paderborn.de>
when we reconstructed PSW using psw_read(), we were trying to clear the
cached USB bits out of env->PSW. The mask was wrong and we would clear
PSW.RM as well.
when we write the PSW using psw_write() we update the rounding modes in
env->fp_status for softfloat. The order of bits used by TriCore is not
the one used by softfloat.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20230828112651.522058-4-kbastian@mail.uni-paderborn.de>
Just remove the declaration. There is nothing in the function after the
switch statement, so it is safe to do.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable FEAT_MOPS on the AArch64 'max' CPU, and add it to
the list of features we implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-13-peter.maydell@linaro.org
The FEAT_MOPS CPY* instructions implement memory copies. These
come in both "always forwards" (memcpy-style) and "overlap OK"
(memmove-style) flavours.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-12-peter.maydell@linaro.org
The FEAT_MOPS memory copy operations need an extra helper routine
for checking for MTE tag checking failures beyond the ones we
already added for memory set operations:
* mte_mops_probe_rev() does the same job as mte_mops_probe(), but
it checks tags starting at the provided address and working
backwards, rather than forwards
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-11-peter.maydell@linaro.org
The FEAT_MOPS SETG* instructions are very similar to the SET*
instructions, but as well as setting memory contents they also
set the MTE tags. They are architecturally required to operate
on tag-granule aligned regions only.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-10-peter.maydell@linaro.org
Currently the only tag-setting instructions always do so in the
context of the current EL, and so we only need one ATA bit in the TB
flags. The FEAT_MOPS SETG instructions include ones which set tags
for a non-privileged access, so we now also need the equivalent "are
tags enabled?" information for EL0.
Add the new TB flag, and convert the existing 'bool ata' field in
DisasContext to a 'bool ata[2]' that can be indexed by the is_unpriv
bit in an instruction, similarly to mte[2].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-9-peter.maydell@linaro.org
Implement the SET* instructions which collectively implement a
"memset" operation. These come in a set of three, eg SETP
(prologue), SETM (main), SETE (epilogue), and each of those has
different flavours to indicate whether memory accesses should be
unpriv or non-temporal.
This commit does not include the "memset with tag setting"
SETG* instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-8-peter.maydell@linaro.org
